Update Benjamin Gaignard address and remove it from no more maintained
drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://lore.kernel.org/r/20220113171921.17466-2-philippe.cornu@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 15512021eb)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b3dcc6dc0f)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reintroduce the !join_mbus single pipe cases for adlp+.
Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.
This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit eef1739544)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Architectures others than x86 have a stub implementation calling
WARN_ON_ONCE(). The appropriate headers need to be included, otherwise
the header-test target will fail with:
HDRTEST drivers/gpu/drm/i915/i915_mm.h
In file included from <command-line>:
./drivers/gpu/drm/i915/i915_mm.h: In function ‘remap_io_mapping’:
./drivers/gpu/drm/i915/i915_mm.h:26:2: error: implicit declaration of function ‘WARN_ON_ONCE’ [-Werror=implicit-function-declaration]
26 | WARN_ON_ONCE(1);
| ^~~~~~~~~~~~
v2: Do not include <linux/printk.h> since call to pr_err() has been
removed
Fixes: 67c430bbaa ("drm/i915: Skip remap_io_mapping() for non-x86 platforms")
Cc: Siva Mullati <siva.mullati@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Siva Mullati <siva.mullati@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131165926.3230642-3-lucas.demarchi@intel.com
(cherry picked from commit 377c675f3c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The i915_ttm_accel_move() function may return error codes that should
be propagated further up the stack rather than consumed assuming that
the accel move failed and could be replaced with a memcpy move.
For -EINTR, -ERESTARTSYS and -EAGAIN, just propagate those codes, rather
than retrying with a memcpy move.
Fixes: 2b0a750caf ("drm/i915/ttm: Failsafe migration blits")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201070340.16457-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 29b9702ffe)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Currently we allow DRRS on IVB PCH ports, but we're missing a
few programming steps meaning it is guaranteed to not work.
And on HSW DRRS is not supported on anything but port A ever
as only transcoder EDP has the M2/N2 registers (though I'm
not sure if HSW ever has eDP on any other port).
Starting from BDW all transcoders have the dynamically
reprogrammable M/N registers so DRRS could work on any
port.
Stop initializing DRRS on ports where it cannot possibly work.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit f0d4ce59f4)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We call __save_depot_stack() unconditionally so the stack depot
must always be initialized or else we'll oops on platforms without
runtime pm support.
Presumably we've not seen this in CI due to stack_depot_init()
already getting called via drm_mm_init()+CONFIG_DRM_DEBUG_MM.
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com> # stackdepot
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 2dba5eb1c7 ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126081539.23227-1-ville.syrjala@linux.intel.com
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 751a9d69b1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes: 28f9222138 ("net/smc: fix ref_tracker issue in smc_pnet_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SocFPGA machine since commit b3ca9888f3 ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly. Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:
/usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f3 ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
POSIX extensions require SMB3.1.1 (so improve the error
message when vers=3.0, 2.1 or 2.0 is specified on mount)
Signed-off-by: Steve French <stfrench@microsoft.com>
Move test_modules_return_* prototypes into a header file in order to
placate -Wmissing-prototypes.
Fixes: 90c5318795 ("s390/module: test loading modules with a lot of relocations")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Now that Alexander Gordeev has volunteered to be a co-maintainer for
s390, I can act as a reviewer instead of being a maintainer for s390.
With Alexander, Heiko, and Vasily we are in really good shape.
I will continue to act as the maintainer for KVM on s390 together with
Janosch.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Change Alexander Gordeev's status so he is maintainer
instead of reviewer for s390.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There's list corruption on cgrp_cpuctx_list. This happens on the
following path:
perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
cpu_ctx_sched_in
ctx_sched_in
ctx_pinned_sched_in
merge_sched_in
perf_cgroup_event_disable: remove the event from the list
Use list_for_each_entry_safe() to allow removing an entry during
iteration.
Fixes: 058fe1c044 ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
Syzbot found a GPF in reweight_entity. This has been bisected to
commit 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid
sched_task_group")
There is a race between sched_post_fork() and setpriority(PRIO_PGRP)
within a thread group that causes a null-ptr-deref in
reweight_entity() in CFS. The scenario is that the main process spawns
number of new threads, which then call setpriority(PRIO_PGRP, 0, -20),
wait, and exit. For each of the new threads the copy_process() gets
invoked, which adds the new task_struct and calls sched_post_fork()
for it.
In the above scenario there is a possibility that
setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread
in the group that is just being created by copy_process(), and for
which the sched_post_fork() has not been executed yet. This will
trigger a null pointer dereference in reweight_entity(), as it will
try to access the run queue pointer, which hasn't been set.
Before the mentioned change the cfs_rq pointer for the task has been
set in sched_fork(), which is called much earlier in copy_process(),
before the new task is added to the thread_group. Now it is done in
the sched_post_fork(), which is called after that. To fix the issue
the remove the update_load param from the update_load param() function
and call reweight_task() only if the task flag doesn't have the
TASK_NEW flag set.
Fixes: 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid sched_task_group")
Reported-by: syzbot+af7a719bc92395ee41b3@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220203161846.1160750-1-tadeusz.struk@linaro.org
fix regression introduced as part of moving to the new mount API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmH7/AUACgkQ8vlZVpUN
gaOsuQf/TFH8QNBSeEkT5ybnrS51KGTv88mdUVMcsmSMhmAFxiGJLFtMLFu9LG7b
bJYCg+Q9Rieb1qqqtGNyLe4p3ewShSzBFu8p7hzKMfu0EEcrJwTYVywSX0oYhMMm
9o+V6CPcGYVZtImihdsmDvgMRRkzoevHQFx+OLhkaq4Qd9ZEdohchYIhRFNXwd+w
CJiL0TFAnrb4QfWgtq3HyY7aoQumf8YI15C+RTfykzCBhZRFRKXjVXPdIjfGe4O2
Fpjr4gSsgYK0Er0LLJvESeFFVpFz+NV7q9W/Vj5ahaKJDpiVGzL/OPZsnafzHPPy
CSa+iP3ZLcTb+KRTOZ1mgjvS34Cmyw==
=DpdZ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before creating the maps.
- Return error if procfs isn't mounted for PID namespaces when synthesizing records
for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid garbling the
screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part got into 5.17.
- Check for NULL pointer before dereference writing debug info about a sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYf/YRAAKCRCyPKLppCJ+
JxH/AQC27sHgz79DrCuA83CYEBRtzXuv0AJ/naVnUAOYm8OVKwEA5fxeJQj9Kiiw
46UIQ45fIxFAT448N9t2g61R6ZQw2g4=
=DUlE
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
(Peter Zijlstra)
-----BEGIN PGP SIGNATURE-----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=0tH5
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
from platform_get_irq() so that deferred probing still works
-----BEGIN PGP SIGNATURE-----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=BPlD
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix altera and xgene EDAC drivers to propagate the correct error code
from platform_get_irq() so that deferred probing still works"
* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix deferred probing
EDAC/altera: Fix deferred probing
The ftrace.target.system_wide must be set before invoking
evlist__create_maps(), otherwise it has no effect.
Fixes: 53be502822 ("perf ftrace: Add 'latency' subcommand")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127132010.4836-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Cinterion MV31-W, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Link: https://lore.kernel.org/r/20220119102519.5342-1-slark_xiao@163.com
[mani: Modified the commit message to reflect Cinterion MV31-W and CCed stable]
Fixes: 87693e092b ("bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI")
Cc: stable@vger.kernel.org # v5.14 +
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Foxconn SDX55, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Link: https://lore.kernel.org/r/20220119101213.5008-1-slark_xiao@163.com
[mani: Added pci_generic prefix to subject and CCed stable]
Fixes: aac426562f ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Cc: stable@vger.kernel.org # v5.12+
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the arm64 variants for read_perf_counter() and read_timestamp().
Unfortunately the counter number is encoded into the instruction, so the
code is a bit verbose to enumerate all possible counters.
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220201214056.702854-1-robh@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Picking the changes from:
06feec6005 ("ASoC: hdmi-codec: Fix OOB memory accesses")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211225005558.503935-1-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf recording, it retrieves process info by iterating nodes in proc
fs. If we run perf in a non-root PID namespace with command:
# unshare --fork --pid perf record -e cycles -a -- test_program
... in this case, unshare command creates a child PID namespace and
launches perf tool in it, but the issue is the proc fs is not mounted
for the non-root PID namespace, this leads to the perf tool gathering
process info from its parent PID namespace.
We can use below command to observe the process nodes under proc fs:
# unshare --pid --fork ls /proc
1 137 1968 2128 3 342 48 62 78 crypto kcore net uptime
10 138 2 2142 30 35 49 63 8 devices keys pagetypeinfo version
11 139 20 2143 304 36 50 64 82 device-tree key-users partitions vmallocinfo
12 14 2011 22 305 37 51 65 83 diskstats kmsg self vmstat
128 140 2038 23 307 39 52 656 84 driver kpagecgroup slabinfo zoneinfo
129 15 2074 24 309 4 53 67 9 execdomains kpagecount softirqs
13 16 2094 241 31 40 54 68 asound fb kpageflags stat
130 164 2096 242 310 41 55 69 buddyinfo filesystems loadavg swaps
131 17 2098 25 317 42 56 70 bus fs locks sys
132 175 21 26 32 43 57 71 cgroups interrupts meminfo sysrq-trigger
133 179 2102 263 329 44 58 75 cmdline iomem misc sysvipc
134 1875 2103 27 330 45 59 76 config.gz ioports modules thread-self
135 19 2117 29 333 46 6 77 consoles irq mounts timer_list
136 1941 2121 298 34 47 60 773 cpuinfo kallsyms mtd tty
So it shows many existed tasks, since unshared command has not mounted
the proc fs for the new created PID namespace, it still accesses the
proc fs of the root PID namespace. This leads to two prominent issues:
- Firstly, PID values are mismatched between thread info and samples.
The gathered thread info are coming from the proc fs of the root PID
namespace, but samples record its PID from the child PID namespace.
- The second issue is profiled program 'test_program' returns its forked
PID number from the child PID namespace, perf tool wrongly uses this
PID number to retrieve the process info via the proc fs of the root
PID namespace.
To avoid issues, we need to mount proc fs for the child PID namespace
with the option '--mount-proc' when use unshare command:
# unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program
Conversely, when the proc fs of the root PID namespace is used by child
namespace, perf tool can detect the multiple PID levels and
nsinfo__is_in_root_namespace() returns false, this patch reports error
for this case:
# unshare --fork --pid perf record -e cycles -a -- test_program
Couldn't synthesize bpf events.
Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace.
Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20211224124014.2492751-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move NULL pointer check before dereferencing the variable.
Addresses-Coverity: 1497622 ("Derereference before null check")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/20220125121141.18347-1-amhamza.mgc@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stderr should be set to a pipe when using TUI. Otherwise it'd
print to stdout and break TUI windows with an error message.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This updates branch sample type with missing PERF_SAMPLE_BRANCH_TYPE_SAVE.
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/1643799443-15109-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
f6c6804c43 ("kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Yf+4k5Fs5Q3HdSG9@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To check if more kernel API sync is needed and also to see if the perf
build tests continue to pass.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.
Fixes: 605f196efb ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().
Fixes: 4a1d0dbc83 ("drm/panel: simple: add panel-dpi support")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYf5Y3AAKCRCAXGG7T9hj
vmfRAP9dBr4LfnfLkY+If70xAVdcImOjK7NzTYCaWAFF1evmJgEAueEWUrV7hJQq
HYiLXPWFsr5eqnzlcWwLPaBxFH+uIAY=
=Jxjf
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- documentation fixes related to Xen
- enable x2apic mode when available when running as hardware
virtualized guest under Xen
- cleanup and fix a corner case of vcpu enumeration when running a
paravirtualized Xen guest
* tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: streamline (and fix) PV CPU enumeration
xen: update missing ioctl magic numers documentation
Improve docs for IOCTL_GNTDEV_MAP_GRANT_REF
xen: xenbus_dev.h: delete incorrect file name
xen/x2apic: enable x2apic mode when supported for HVM
* A couple of fixes when handling an exception while a SError has been delivered
* Workaround for Cortex-A510's single-step erratum
RISCV:
* Make CY, TM, and IR counters accessible in VU mode
* Fix SBI implementation version
x86:
* Report deprecation of x87 features in supported CPUID
* Preparation for fixing an interrupt delivery race on AMD hardware
* Sparse fix
All except POWER and s390:
* Rework guest entry code to correctly mark noinstr areas and fix vtime'
accounting (for x86, this was already mostly correct but not entirely;
for ARM, MIPS and RISC-V it wasn't)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmH+E4AUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNujwf+ON/8pBWyMPdjiY5l5SyNLpRup8Su
zkQoMEDICI7khYUz2bEAjOazFWHmHPsdogAlG82QeJCbFmCqyMb6iX0uWj53BdGP
P2bOM/tXbulvKBBeiTritkUUNO+hBmmSF+57AOJSW+Enhc7HFwk54cuft6f30r+d
JRaEOhPOP34hQ+wFQQhZZh72BaZBqgnrYwZDp1TiC0Wh8v7P4Nf+NFtEgba2nsxC
xfz5PrEhvegtU8Ee9JAF2bAl7851WJq557P2cOpghtUMgh4t6GzCcUOCKIie67oQ
0Vaf+OieAopdT+QNazSEWO9zxl7eTpWjk2hrwsDrgKHAL/YmuWJuSyEYIA==
=C0LZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
- Fix fallocate so that it drops all file privileges when files are
modified instead of open-coding that incompletely.
- Fix fallocate to flush the log if the caller wanted synchronous file
updates.
-----BEGIN PGP SIGNATURE-----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=dqTg
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"I was auditing operations in XFS that clear file privileges, and
realized that XFS' fallocate implementation drops suid/sgid but
doesn't clear file capabilities the same way that file writes and
reflink do.
There are VFS helpers that do it correctly, so refactor XFS to use
them. I also noticed that we weren't flushing the log at the correct
point in the fallocate operation, so that's fixed too.
Summary:
- Fix fallocate so that it drops all file privileges when files are
modified instead of open-coding that incompletely.
- Fix fallocate to flush the log if the caller wanted synchronous
file updates"
* tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: ensure log flush at the end of a synchronous fallocate call
xfs: move xfs_update_prealloc_flags() to xfs_pnfs.c
xfs: set prealloc flag in xfs_alloc_file_space()
xfs: fallocate() should call file_modified()
xfs: remove XFS_PREALLOC_SYNC
xfs: reject crazy array sizes being fed to XFS_IOC_GETBMAP*
- Fix a bug where callers of ->sync_fs (e.g. sync_filesystem and
syncfs(2)) ignore the return value.
- Fix a bug where callers of sync_filesystem (e.g. fs freeze) ignore
the return value.
- Fix a bug in XFS where xfs_fs_sync_fs never passed back error
returns.
-----BEGIN PGP SIGNATURE-----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=BdrI
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs fixes from Darrick Wong:
"I was auditing the sync_fs code paths recently and noticed that most
callers of ->sync_fs ignore its return value (and many implementations
never return nonzero even if the fs is broken!), which means that
internal fs errors and corruption are not passed up to userspace
callers of syncfs(2) or FIFREEZE. Hence fixing the common code and
XFS, and I'll start working on the ext4/btrfs folks if this is merged.
Summary:
- Fix a bug where callers of ->sync_fs (e.g. sync_filesystem and
syncfs(2)) ignore the return value.
- Fix a bug where callers of sync_filesystem (e.g. fs freeze) ignore
the return value.
- Fix a bug in XFS where xfs_fs_sync_fs never passed back error
returns"
* tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: return errors in xfs_fs_sync_fs
quota: make dquot_quota_sync return errors from ->sync_fs
vfs: make sync_filesystem return errors from ->sync_fs
vfs: make freeze_super abort when sync_filesystem returns error
- Limit the length of ioend chains in writeback so that we don't trip
the softlockup watchdog and to limit long tail latency on clearing
PageWriteback.
-----BEGIN PGP SIGNATURE-----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=a5K9
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"A single bugfix for iomap.
The fix should eliminate occasional complaints about stall warnings
when a lot of writeback IO completes all at once and we have to then
go clearing status on a large number of folios.
Summary:
- Limit the length of ioend chains in writeback so that we don't trip
the softlockup watchdog and to limit long tail latency on clearing
PageWriteback"
* tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs, iomap: limit individual ioend chain lengths in writeback
The filters for the PTP trap keys are incorrectly configured, in the
sense that is2_entry_set() only looks at trap->key.ipv4.dport or
trap->key.ipv6.dport if trap->key.ipv4.proto or trap->key.ipv6.proto is
set to IPPROTO_TCP or IPPROTO_UDP.
But we don't do that, so is2_entry_set() goes through the "else" branch
of the IP protocol check, and ends up installing a rule for "Any IP
protocol match" (because msk is also 0). The UDP port is ignored.
This means that when we run "ptp4l -i swp0 -4", all IP traffic is
trapped to the CPU, which hinders bridging.
Fix this by specifying the IP protocol in the VCAP IS2 filters for PTP
over UDP.
Fixes: 96ca08c058 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
