mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-29 05:44:11 +00:00
16872 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Andrii Nakryiko
|
9ec71c1cdb |
libbpf: fix btf_dedup equivalence check handling of different kinds
btf_dedup_is_equiv() used to compare btf_type->info fields, before doing
kind-specific equivalence check. This comparsion implicitly verified
that candidate and canonical types are of the same kind. With enum fwd
resolution logic this check couldn't be done generically anymore, as for
enums info contains vlen, which differs between enum fwd and
fully-defined enum, so this check was subsumed by kind-specific
equivalence checks.
This change caused btf_dedup_is_equiv() to let through VOID vs other
types check to reach switch, which was never meant to be handing VOID
kind, as VOID kind is always pre-resolved to itself and is only
equivalent to itself, which is checked early in btf_dedup_is_equiv().
This change adds back BTF kind equality check in place of more generic
btf_type->info check, still defering further kind-specific checks to
a per-kind switch.
Fixes:
|
||
|
Paul Chaignon
|
cabacfbbe5 |
selftests/bpf: test case for invalid call stack in dead code
This patch adds a test case with an excessive number of call stack frames in dead code. Signed-off-by: Paul Chaignon <paul.chaignon@orange.com> Tested-by: Xiao Han <xiao.han@orange.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
David S. Miller
|
27602e2c44 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says: ==================== pull-request: bpf 2019-03-24 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) libbpf verision fix up from Daniel. 2) fix liveness propagation from Jakub. 3) fix verbose print of refcounted regs from Martin. 4) fix for large map allocations from Martynas. 5) fix use after free in sanitize_ptr_alu from Xu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Daniel Borkmann
|
63197f78bc |
bpf, libbpf: clarify bump in libbpf version info
The current documentation suggests that we would need to bump the
libbpf version on every change. Lets clarify this a bit more and
reflect what we do today in practice, that is, bumping it once per
development cycle.
Fixes:
|
||
|
Daniel Borkmann
|
1d382264d9 |
bpf, libbpf: fix version info and add it to shared object
Even though libbpf's versioning script for the linker (libbpf.map)
is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has
not been updated along with it and is therefore still on 0.0.1.
While fixing up, I also noticed that the generated shared object
versioning information is missing, typical convention is to have
a linker name (libbpf.so), soname (libbpf.so.0) and real name
(libbpf.so.0.0.2) for library management. This is based upon the
LIBBPF_VERSION as well.
The build will then produce the following bpf libraries:
# ll libbpf*
libbpf.a
libbpf.so -> libbpf.so.0.0.2
libbpf.so.0 -> libbpf.so.0.0.2
libbpf.so.0.0.2
# readelf -d libbpf.so.0.0.2 | grep SONAME
0x000000000000000e (SONAME) Library soname: [libbpf.so.0]
And install them accordingly:
# rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/btf.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so.0.0.2
LINK /tmp/bld/test_libbpf
INSTALL /tmp/bld/libbpf.a
INSTALL /tmp/bld/libbpf.so.0.0.2
# ll /usr/local/lib64/libbpf.*
/usr/local/lib64/libbpf.a
/usr/local/lib64/libbpf.so -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0.0.2
Fixes:
|
||
|
Jakub Kicinski
|
83d163124c |
bpf: verifier: propagate liveness on all frames
Commit |
||
|
Davide Caratti
|
7e0c8892df |
net/sched: act_vlan: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action vlan pop pass index 90
# tc actions replace action vlan \
> pop goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action vlan
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: vlan pop goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00
RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00
R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0
FS: 0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? enqueue_hrtimer+0x39/0x90
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387
RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000
R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_vlan_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
e5fdabacbf |
net/sched: act_tunnel_key: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 \
> nocsum id 1 pass index 90
# tc actions replace action tunnel_key \
> set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 nocsum id 1 \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action tunnel_key
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: tunnel_key set
src_ip 10.10.10.1
dst_ip 20.20.2.0
key_id 1
dst_port 3128
nocsum goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002aba4067 P4D 800000002aba4067 PUD 795f9067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff9346bdb83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9346bb795c00 RCX: 0000000000000002
RDX: 0000000000000000 RSI: ffff93466c881700 RDI: 0000000000000246
RBP: ffff9346bdb83c80 R08: ffff9346b3e1e0c8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9346b978f000
R13: ffff9346b978f008 R14: 0000000000000001 R15: ffff93466dceeb40
FS: 0000000000000000(0000) GS:ffff9346bdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007a6c2002 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 55 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa48a8038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffaa8184f0 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0011251c6fcfac49 R09: ffff9346b995be00
R10: ffffa48a805e7ce8 R11: 00000000024c38dd R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_tunnel_key veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel mbcache snd_hda_intel jbd2 snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer snd pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops ttm net_failover virtio_console virtio_blk failover drm serio_raw crc32c_intel ata_piix virtio_pci floppy virtio_ring libata virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_tunnel_key_init() proved to fix
the above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
7c3d825d12 |
net/sched: act_skbmod: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action skbmod set smac 00:c1:a0:c1:a0:00 pass index 90
# tc actions replace action skbmod \
> set smac 00:c1:a0:c1:a0:00 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action skbmod
had the following output:
src MAC address <00:c1:a0:c1:a0:00>
src MAC address <00:c1:a0:c1:a0:00>
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: skbmod goto chain 42 set smac 00:c1:a0:c1:a0:00
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002d5c7067 P4D 800000002d5c7067 PUD 77e16067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff8987ffd83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8987aeb68800 RCX: ffff8987fa263640
RDX: 0000000000000000 RSI: ffff8987f51c8802 RDI: 00000000000000a0
RBP: ffff8987ffd83c80 R08: ffff8987f939bac8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8987f5c77d00
R13: ffff8987f5c77d08 R14: 0000000000000001 R15: ffff8987f0c29f00
FS: 0000000000000000(0000) GS:ffff8987ffd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007832c004 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 56 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa2a1c038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffa94184f0 RBX: 0000000000000003 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
RBP: 0000000000000003 R08: 001123cfc2ba71ac R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000f4240 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_skbmod veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd cryptd glue_helper snd_pcm joydev pcspkr virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover virtio_console ttm virtio_blk failover drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_skbmod_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
ec7727bb24 |
net/sched: act_skbedit: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action skbedit ptype host pass index 90
# tc actions replace action skbedit \
> ptype host goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action skbedit
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: skbedit ptype host goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 3467 Comm: kworker/3:3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb50a81e1fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9aa47ba4ea00 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffff9aa469eeb3c0 RDI: ffff9aa47ba4ea00
RBP: ffffb50a81e1fb70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9aa47bce0638 R12: ffff9aa4793b0c00
R13: ffff9aa4793b0c08 R14: 0000000000000001 R15: ffff9aa469eeb3c0
FS: 0000000000000000(0000) GS:ffff9aa474780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007360e005 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_skbedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev soundcore pcspkr virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net net_failover drm failover virtio_blk virtio_console ata_piix virtio_pci crc32c_intel serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_skbedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
4b006b0c13 |
net/sched: act_simple: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action simple sdata hello pass index 90
# tc actions replace action simple \
> sdata world goto chain 42 index 90 cookie c1a0c1a0
# tc action show action simple
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: Simple <world>
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000006a6fb067 P4D 800000006a6fb067 PUD 6aed6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3241 Comm: kworker/2:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffbe6781763ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9e59bdb80e00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9e59b4716738 RDI: ffff9e59ab12d140
RBP: ffffbe6781763b70 R08: 0000000000000234 R09: 0000000000aaaaaa
R10: 0000000000000000 R11: ffff9e59b247cd50 R12: ffff9e59b112f100
R13: ffff9e59b112f108 R14: 0000000000000001 R15: ffff9e59ab12d0c0
FS: 0000000000000000(0000) GS:ffff9e59b4700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000006af92004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_simple veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm net_failover virtio_console virtio_blk failover drm crc32c_intel serio_raw floppy ata_piix libata virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_simple_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
e8c87c643e |
net/sched: act_sample: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action sample rate 1024 group 4 pass index 90
# tc actions replace action sample \
> rate 1024 group 4 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action sample
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: sample rate 1/1024 group 4 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 8000000079966067 P4D 8000000079966067 PUD 7987b067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffbee60033fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff99d7ae6e3b00 RCX: 00000000e555df9b
RDX: 0000000000000000 RSI: 00000000b0352718 RDI: ffff99d7fda1fcf0
RBP: ffffbee60033fb70 R08: 0000000070731ab1 R09: 0000000000000400
R10: 0000000000000000 R11: ffff99d7ac733838 R12: ffff99d7f3c2be00
R13: ffff99d7f3c2be08 R14: 0000000000000001 R15: ffff99d7f3c2b600
FS: 0000000000000000(0000) GS:ffff99d7fda00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000797de006 CR4: 00000000001606f0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_sample psample veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd snd_pcm cryptd glue_helper snd_timer joydev snd pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover ttm failover virtio_blk virtio_console drm ata_piix serio_raw crc32c_intel libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_sample_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
d6124d6ba6 |
net/sched: act_police: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action police rate 3mbit burst 250k pass index 90
# tc actions replace action police \
> rate 3mbit burst 250k goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action police rate 3mbit burst
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: police 0x5a rate 3Mbit burst 250Kb mtu 2Kb action goto chain 42 overhead 0b
ref 2 bind 1
cookie c1a0c1a0
Then, when crash0 starts transmitting more than 3Mbit/s, the following
kernel crash is observed:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007a779067 P4D 800000007a779067 PUD 2ad96067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 5032 Comm: netperf Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb0e04064fa60 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff93bb3322cce0 RCX: 0000000000000005
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff93bb3322cce0
RBP: ffffb0e04064fb00 R08: 0000000000000022 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff93bb3beed300
R13: ffff93bb3beed308 R14: 0000000000000001 R15: ffff93bb3b64d000
FS: 00007f0bc6be5740(0000) GS:ffff93bb3db80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000746a8001 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ipt_do_table+0x31c/0x420 [ip_tables]
? ip_finish_output2+0x16f/0x430
ip_finish_output2+0x16f/0x430
? ip_output+0x69/0xe0
ip_output+0x69/0xe0
? ip_forward_options+0x1a0/0x1a0
__tcp_transmit_skb+0x563/0xa40
tcp_write_xmit+0x243/0xfa0
__tcp_push_pending_frames+0x32/0xf0
tcp_sendmsg_locked+0x404/0xd30
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x36/0x40
__sys_sendto+0x10e/0x140
? __sys_connect+0x87/0xf0
? syscall_trace_enter+0x1df/0x2e0
? __audit_syscall_exit+0x216/0x260
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f0bc5ffbafd
Code: 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 8b 05 ae c4 2c 00 85 c0 75 2d 45 31 c9 45 31 c0 4c 63 d1 48 63 ff b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 63 63 2c 00 f7 d8 64 89 02 48
RSP: 002b:00007fffef94b7f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000004000 RCX: 00007f0bc5ffbafd
RDX: 0000000000004000 RSI: 00000000017e5420 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
R13: 00000000017e51d0 R14: 0000000000000010 R15: 0000000000000006
Modules linked in: act_police veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_blk virtio_net virtio_console net_failover failover crc32c_intel ata_piix libata serio_raw virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_police_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
6ac86ca352 |
net/sched: act_pedit: validate the control action inside init()
the following script:
# tc filter add dev crash0 egress matchall \
> action pedit ex munge ip ttl set 10 pass index 90
# tc actions replace action pedit \
> ex munge ip ttl set 10 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action pedit
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: pedit action goto chain 42 keys 1
index 90 ref 2 bind 1
key #0 at ipv4+8: val 0a000000 mask 00ffffff
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff94a73db03be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff94a6ee4c0700 RCX: 000000000000000a
RDX: 0000000000000000 RSI: ffff94a6ed22c800 RDI: 0000000000000000
RBP: ffff94a73db03c80 R08: ffff94a7386fa4c8 R09: ffff94a73229ea20
R10: 0000000000000000 R11: 0000000000000000 R12: ffff94a6ed22cb00
R13: ffff94a6ed22cb08 R14: 0000000000000001 R15: ffff94a6ed22c800
FS: 0000000000000000(0000) GS:ffff94a73db00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007120e002 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 4e ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffab1740387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffb18184f0 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
RBP: 0000000000000002 R08: 000f168fa695f9a9 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_pedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep aesni_intel snd_hda_core crypto_simd snd_seq cryptd glue_helper snd_seq_device snd_pcm joydev snd_timer pcspkr virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper virtio_net net_failover syscopyarea sysfillrect sysimgblt failover virtio_blk fb_sys_fops virtio_console ttm drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_pedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
1e45d043a8 |
net/sched: act_nat: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action nat ingress 1.18.1.1 1.18.2.2 pass index 90
# tc actions replace action nat \
> ingress 1.18.1.1 1.18.2.2 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action nat
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: nat ingress 1.18.1.1/32 1.18.2.2 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002d180067 P4D 800000002d180067 PUD 7cb8b067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 164 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffae4500e2fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9fa52e28c800 RCX: 0000000001011201
RDX: 0000000000000000 RSI: 0000000000000056 RDI: ffff9fa52ca12800
RBP: ffffae4500e2fb70 R08: 0000000000000022 R09: 000000000000000e
R10: 00000000ffffffff R11: 0000000001011201 R12: ffff9fa52cbc9c00
R13: ffff9fa52cbc9c08 R14: 0000000000000001 R15: ffff9fa52ca12780
FS: 0000000000000000(0000) GS:ffff9fa57db80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000073f8c004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_nat veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk net_failover failover virtio_console drm crc32c_intel floppy ata_piix libata virtio_pci virtio_ring virtio serio_raw dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_nat_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
c53075ea5d |
net/sched: act_connmark: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action connmark pass index 90
# tc actions replace action connmark \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action connmark
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: connmark zone 0 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 302 Comm: kworker/0:2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff9bea406c3ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8c5dfc009f00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bea406c3a80 RDI: ffff8c5dfb9d6ec0
RBP: ffff9bea406c3b70 R08: ffff8c5dfda222a0 R09: ffffffff90933c3c
R10: 0000000000000000 R11: 0000000092793f7d R12: ffff8c5df48b3c00
R13: ffff8c5df48b3c08 R14: 0000000000000001 R15: ffff8c5dfb9d6e40
FS: 0000000000000000(0000) GS:ffff8c5dfda00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000062e0e006 CR4: 00000000001606f0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd cryptd snd glue_helper joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_net net_failover syscopyarea virtio_blk failover virtio_console sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix crc32c_intel serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_connmark_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
ff9721d32b |
net/sched: act_mirred: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action mirred ingress mirror dev lo pass
# tc actions replace action mirred \
> ingress mirror dev lo goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action mirred
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: mirred (Ingress Mirror to device lo) goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
Mirror/redirect action on
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 47 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffa772404b7ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9c5afc3f4300 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9c5afdba9380 RDI: 0000000000029380
RBP: ffffa772404b7b70 R08: ffff9c5af7010028 R09: ffff9c5af7010029
R10: 0000000000000000 R11: ffff9c5af94c6a38 R12: ffff9c5af7953000
R13: ffff9c5af7953008 R14: 0000000000000001 R15: ffff9c5af7953d00
FS: 0000000000000000(0000) GS:ffff9c5afdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007c514004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_mirred veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_codec mbcache ghash_clmulni_intel jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer snd crypto_simd cryptd glue_helper soundcore virtio_balloon joydev pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm virtio_blk net_failover virtio_console failover drm ata_piix crc32c_intel virtio_pci serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_mirred_init() proved to fix the
above issue. For the same reason, postpone the assignment of tcfa_action
and tcfm_eaction to avoid partial reconfiguration of a mirred rule when
it's replaced by another one that mirrors to a device that does not
exist. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
11a94d7fd8 |
net/sched: act_ife: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action ife encode allow mark pass index 90
# tc actions replace action ife \
> encode allow mark goto chain 42 index 90 cookie c1a0c1a0
# tc action show action ife
had the following output:
IFE type 0xED3E
IFE type 0xED3E
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: ife encode action goto chain 42 type 0XED3E
allow mark
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007b4e7067 P4D 800000007b4e7067 PUD 7b4e6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 164 Comm: kworker/2:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffa6a7c0553ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9796ee1bbd00 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffa6a7c0553b70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9797385bb038 R12: ffff9796ead9d700
R13: ffff9796ead9d708 R14: 0000000000000001 R15: ffff9796ead9d800
FS: 0000000000000000(0000) GS:ffff97973db00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007c41e006 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_gact act_meta_mark act_ife dummy veth ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd snd cryptd glue_helper virtio_balloon joydev pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl virtio_net drm_kms_helper virtio_blk net_failover syscopyarea failover sysfillrect virtio_console sysimgblt fb_sys_fops ttm drm crc32c_intel serio_raw ata_piix virtio_pci virtio_ring libata virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_ife]
CR2: 0000000000000000
Validating the control action within tcf_ife_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
0da2dbd602 |
net/sched: act_gact: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action gact pass index 90
# tc actions replace action gact \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action gact
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: gact action goto chain 42
random type none pass val 0
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff8c2434703be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8c23ed6d7e00 RCX: 000000000000005a
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c23ed6d7e00
RBP: ffff8c2434703c80 R08: ffff8c243b639ac8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2429e68b00
R13: ffff8c2429e68b08 R14: 0000000000000001 R15: ffff8c2429c5a480
FS: 0000000000000000(0000) GS:ffff8c2434700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000002dc0e005 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 74 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffff9c8640387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff8b2184f0 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
RBP: 0000000000000002 R08: 000eb57882b36cc3 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_gact act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core mbcache jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper virtio_balloon joydev pcspkr snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea virtio_net sysfillrect net_failover virtio_blk sysimgblt fb_sys_fops virtio_console ttm failover drm crc32c_intel serio_raw ata_piix libata floppy virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
CR2: 0000000000000000
Validating the control action within tcf_gact_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
f5c29d8386 |
net/sched: act_csum: validate the control action inside init()
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall action csum icmp pass index 90
# tc actions replace action csum icmp goto chain 42 index 90 \
> cookie c1a0c1a0
# tc actions show action csum
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: csum (icmp) action goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 8000000074692067 P4D 8000000074692067 PUD 2e210067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff93153da03be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9314ee40f700 RCX: 0000000000003a00
RDX: 0000000000000000 RSI: ffff931537c87828 RDI: ffff931537c87818
RBP: ffff93153da03c80 R08: 00000000527cffff R09: 0000000000000003
R10: 000000000000003f R11: 0000000000000028 R12: ffff9314edf68400
R13: ffff9314edf68408 R14: 0000000000000001 R15: ffff9314ed67b600
FS: 0000000000000000(0000) GS:ffff93153da00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000073e32003 CR4: 00000000001606f0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 66 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffffff9a803e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff99e184f0 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000000
RBP: 0000000000000000 R08: 000eb5c4572376b3 R09: 0000000000000000
R10: ffffa53e806a3ca0 R11: 00000000000f4240 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_kernel+0x49e/0x4be
secondary_startup_64+0xa4/0xb0
Modules linked in: act_csum veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel mbcache snd_hda_codec jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt net_failover fb_sys_fops virtio_console virtio_blk ttm failover drm ata_piix crc32c_intel floppy virtio_pci serio_raw libata virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_csum_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
Davide Caratti
|
4e1810049c |
net/sched: act_bpf: validate the control action inside init()
the following script:
# tc filter add dev crash0 egress matchall \
> action bpf bytecode '1,6 0 0 4294967295' pass index 90
# tc actions replace action bpf \
> bytecode '1,6 0 0 4294967295' goto chain 42 index 90 cookie c1a0c1a0
# tc action show action bpf
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: bpf bytecode '1,6 0 0 4294967295' default-action goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb3a0803dfa90 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff942b347ada00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffb3a08034d038 RDI: ffff942b347ada00
RBP: ffffb3a0803dfb30 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffb3a0803dfb0c R12: ffff942b3b682b00
R13: ffff942b3b682b08 R14: 0000000000000001 R15: ffff942b3b682f00
FS: 00007f6160a72740(0000) GS:ffff942b3da80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000795a4002 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip_finish_output2+0x16f/0x430
ip_finish_output2+0x16f/0x430
? ip_output+0x69/0xe0
ip_output+0x69/0xe0
? ip_forward_options+0x1a0/0x1a0
ip_send_skb+0x15/0x40
raw_sendmsg+0x8e1/0xbd0
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xa0
? try_to_wake_up+0x54/0x480
? ldsem_down_read+0x3f/0x280
? _cond_resched+0x15/0x40
? down_read+0xe/0x30
? copy_termios+0x1e/0x70
? tty_mode_ioctl+0x1b6/0x4c0
? sock_sendmsg+0x36/0x40
sock_sendmsg+0x36/0x40
__sys_sendto+0x10e/0x140
? do_vfs_ioctl+0xa4/0x640
? handle_mm_fault+0xdc/0x210
? syscall_trace_enter+0x1df/0x2e0
? __audit_syscall_exit+0x216/0x260
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f615f7e3c03
Code: 48 8b 0d 90 62 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 9d c3 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24
RSP: 002b:00007ffee5d8cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055a4f28f1700 RCX: 00007f615f7e3c03
RDX: 0000000000000040 RSI: 000055a4f28f1700 RDI: 0000000000000003
RBP: 00007ffee5d8e340 R08: 000055a4f28ee510 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 000055a4f28f16c0 R14: 000055a4f28ef69c R15: 0000000000000080
Modules linked in: act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache crct10dif_pclmul jbd2 crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper pcspkr joydev virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_blk virtio_net virtio_console net_failover failover syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ata_piix serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_bpf_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes:
|
||
|
David S. Miller
|
0aedadcf6b |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2019-03-16 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a umem memory leak on cleanup in AF_XDP, from Björn. 2) Fix BTF to properly resolve forward-declared enums into their corresponding full enum definition types during deduplication, from Andrii. 3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus. 4) Fix accessing invalid pointer returned from bpf_tcp_sock() and bpf_sk_fullsock() after bpf_sk_release() was called, from Martin. 5) Fix generation of load/store DW instructions in PPC JIT, from Naveen. 6) Various fixes in BPF helper function documentation in bpf.h UAPI header used to bpf-helpers(7) man page, from Quentin. 7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
f261c4e529 |
Merge branch 'akpm' (patches from Andrew)
Merge misc patches from Andrew Morton: - a little bit more MM - a few fixups [ The "little bit more MM" is actually just one of the three patches Andrew sent for mm/filemap.c, I'm still mulling over two more of them from Josef Bacik - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/swap.h: use offsetof() instead of custom __swapoffset macro tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind zram: default to lzo-rle instead of lzo filemap: pass vm_fault to the mmap ra helpers |
||
|
Alexey Dobriyan
|
17415606f9 |
tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind
: selftests: proc: proc-pid-vm : ======================================== : proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed. : Aborted Because the vsyscall mapping is enabled. Read from vsyscall page to tell if vsyscall is being used. Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2 Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Quentin Monnet
|
ea6eced00e |
tools: bpf: synchronise BPF UAPI header with tools
Synchronise the bpf.h header under tools, to report the latest fixes and additions to the documentation for the BPF helpers. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
8fd7a61aa5 |
selftests/bpf: add fwd enum resolution test for btf_dedup
This patch adds test verifying new btf_dedup logic of resolving forward-declared enums. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
9768095ba9 |
btf: resolve enum fwds in btf_dedup
GCC and clang support enum forward declarations as an extension. Such forward-declared enums will be represented as normal BTF_KIND_ENUM types with vlen=0. This patch adds ability to resolve such enums to their corresponding fully defined enums. This helps to avoid duplicated BTF type graphs which only differ by some types referencing forward-declared enum vs full enum. One such example in kernel is enum irqchip_irq_state, defined in include/linux/interrupt.h and forward-declared in include/linux/irq.h. This causes entire struct task_struct and all referenced types to be duplicated in btf_dedup output. This patch eliminates such duplication cases. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
9352ca585b |
Additional power management updates for 5.1-rc1
- Fix registration of new cpuidle governors partially broken during
the 5.0 development cycle by mistake (Rafael Wysocki).
- Avoid integer overflows in the menu cpuidle governor by making
it discard the overflowing data points upfront (Rafael Wysocki).
- Fix minor mistake in the recent update of the iowait boost
computation in the intel_pstate driver (Rafael Wysocki).
- Drop incorrect __init annotation from one function in the pxa2xx
cpufreq driver (Arnd Bergmann).
- Fix the operating performance points (OPP) framework
initialization for devices in multiple power domains if
only one of them is scalable (Rajendra Nayak).
- Fix mistake in dev_pm_opp_set_rate() which causes it to skip
updating the performance state if the new frequency is the same
as the old one (Viresh Kumar).
- Rework the cancellation of wakeup source timers to avoid
potential issues with it and do some cleanups unlocked by
that change (Viresh Kumar, Rafael Wysocki).
- Clean up the code computing the active/suspended time of devices
in the PM-runtime framework after recent changes (Ulf Hansson).
- Make the power management infrastructure code use pr_fmt()
consistently (Joe Perches).
- Clean up the generic power domains (genpd) framework somewhat
(Aisheng Dong).
- Improve kerneldoc comments for two functions in the cpufreq core
(Rafael Wysocki).
- Fix typo in a PM QoS file description comment (Aisheng Dong).
- Update the handling of CPU boost frequencies in the cpupower
utility (Abhishek Goel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=fHRq
-----END PGP SIGNATURE-----
Merge tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups on top of the previously merged
power management material for 5.1-rc1 with one cpupower utility update
that wasn't pushed earlier due to unfortunate timing.
Specifics:
- Fix registration of new cpuidle governors partially broken during
the 5.0 development cycle by mistake (Rafael Wysocki).
- Avoid integer overflows in the menu cpuidle governor by making it
discard the overflowing data points upfront (Rafael Wysocki).
- Fix minor mistake in the recent update of the iowait boost
computation in the intel_pstate driver (Rafael Wysocki).
- Drop incorrect __init annotation from one function in the pxa2xx
cpufreq driver (Arnd Bergmann).
- Fix the operating performance points (OPP) framework initialization
for devices in multiple power domains if only one of them is
scalable (Rajendra Nayak).
- Fix mistake in dev_pm_opp_set_rate() which causes it to skip
updating the performance state if the new frequency is the same as
the old one (Viresh Kumar).
- Rework the cancellation of wakeup source timers to avoid potential
issues with it and do some cleanups unlocked by that change (Viresh
Kumar, Rafael Wysocki).
- Clean up the code computing the active/suspended time of devices in
the PM-runtime framework after recent changes (Ulf Hansson).
- Make the power management infrastructure code use pr_fmt()
consistently (Joe Perches).
- Clean up the generic power domains (genpd) framework somewhat
(Aisheng Dong).
- Improve kerneldoc comments for two functions in the cpufreq core
(Rafael Wysocki).
- Fix typo in a PM QoS file description comment (Aisheng Dong).
- Update the handling of CPU boost frequencies in the cpupower
utility (Abhishek Goel)"
* tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governor: Add new governors to cpuidle_governors again
cpufreq: intel_pstate: Fix up iowait_boost computation
PM / OPP: Update performance state when freq == old_freq
PM / wakeup: Drop wakeup_source_drop()
PM / wakeup: Rework wakeup source timer cancellation
PM / domains: Remove one unnecessary blank line
PM / Domains: Return early for all errors in _genpd_power_off()
PM / Domains: Improve warn for multiple states but no governor
OPP: Fix handling of multiple power domains
PM / QoS: Fix typo in file description
cpufreq: pxa2xx: remove incorrect __init annotation
PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
PM-runtime: Consolidate code to get active/suspended time
PM: Add and use pr_fmt()
cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()
cpuidle: menu: Avoid overflows when computing variance
tools/power/cpupower: Display boost frequency separately
|
||
|
Rafael J. Wysocki
|
b444e1aa3e |
Merge branches 'pm-opp' and 'pm-tools'
* pm-opp: PM / OPP: Update performance state when freq == old_freq OPP: Fix handling of multiple power domains * pm-tools: tools/power/cpupower: Display boost frequency separately |
||
|
Martin KaFai Lau
|
7681e7b2fb |
bpf: Add an example for bpf_get_listener_sock
This patch adds an example in using the new helper bpf_get_listener_sock(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Martin KaFai Lau
|
b55aa7b04b |
bpf: Test ref release issue in bpf_tcp_sock and bpf_sk_fullsock
Adding verifier tests to ensure the ptr returned from bpf_tcp_sock() and bpf_sk_fullsock() cannot be accessed after bpf_sk_release() is called. A few of the tests are derived from a reproducer test by Lorenz Bauer. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Martin KaFai Lau
|
ef776a272b |
bpf: Sync bpf.h to tools/
This patch sync the uapi bpf.h to tools/. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Magnus Karlsson
|
6bf21b54a5 |
libbpf: fix to reject unknown flags in xsk_socket__create()
In xsk_socket__create(), the libbpf_flags field was not checked for
setting currently unused/unknown flags. This patch fixes that by
returning -EINVAL if the user has set any flag that is not in use at
this point in time.
Fixes:
|
||
|
Yonghong Song
|
d6f1837107 |
selftests/bpf: fix segfault of test_progs when prog loading failed
The test_progs subtests, test_spin_lock() and test_map_lock(), requires BTF present to run successfully. Currently, when BTF failed to load, test_progs will segfault, $ ./test_progs ... 12: (bf) r1 = r8 13: (85) call bpf_spin_lock#93 map 'hash_map' has to have BTF in order to use bpf_spin_lock libbpf: -- END LOG -- libbpf: failed to load program 'map_lock_demo' libbpf: failed to load object './test_map_lock.o' test_map_lock:bpf_prog_load errno 13 Segmentation fault The segfault is caused by uninitialized variable "obj", which is used in bpf_object__close(obj), when bpf prog failed to load. Initializing variable "obj" to NULL in two occasions fixed the problem. $ ./test_progs ... Summary: 219 PASSED, 2 FAILED Fixes: |
||
|
Linus Torvalds
|
a667cb7a94 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
- a few misc things
- the rest of MM
- remove flex_arrays, replace with new simple radix-tree implementation
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits)
Drop flex_arrays
sctp: convert to genradix
proc: commit to genradix
generic radix trees
selinux: convert to kvmalloc
md: convert to kvmalloc
openvswitch: convert to kvmalloc
of: fix kmemleak crash caused by imbalance in early memory reservation
mm: memblock: update comments and kernel-doc
memblock: split checks whether a region should be skipped to a helper function
memblock: remove memblock_{set,clear}_region_flags
memblock: drop memblock_alloc_*_nopanic() variants
memblock: memblock_alloc_try_nid: don't panic
treewide: add checks for the return value of memblock_alloc*()
swiotlb: add checks for the return value of memblock_alloc*()
init/main: add checks for the return value of memblock_alloc*()
mm/percpu: add checks for the return value of memblock_alloc*()
sparc: add checks for the return value of memblock_alloc*()
ia64: add checks for the return value of memblock_alloc*()
arch: don't memset(0) memory returned by memblock_alloc()
...
|
||
|
Kent Overstreet
|
586187d7de |
Drop flex_arrays
All existing users have been converted to generic radix trees Link: http://lkml.kernel.org/r/20181217131929.11727-8-kent.overstreet@gmail.com Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@parisplace.org> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Zev Weiss
|
fec5248668 |
tools/testing/selftests/sysctl/sysctl.sh: add tests for >32-bit values written to 32-bit integers
Patch series "sysctl: fix range-checking in do_proc_dointvec_minmax_conv()", v2. After being left with an unusable system after a typo executing something like 'echo $((1<<24)) > /proc/sys/vm/max_map_count', I found that do_proc_dointvec_minmax_conv() was missing a check to ensure that the converted value actually fits in an int. The first of the following patches enhances the sysctl selftest such that it detects this problem; the second provides a minimal fix (suitable for -stable) such that the selftest passes. The third patch then performs a more thorough refactoring to eliminate the code duplication that led to the bug in the first place (maintaining the passing status of the selftest). This patch (of 3): At present this exposes a bug in do_proc_dointvec_minmax_conv() (it fails to check for values that are too wide to fit in an int). Link: http://lkml.kernel.org/r/20190207123426.9202-2-zev@bewilderbeest.net Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
6cdfa54cd2 |
The biggest change for this release is in the histogram code.
- Add "onchange(var)" histogram handler that executes a action when $var
changes.
- Add new "snapshot()" action for histogram handlers, that causes a
snapshot of the ring buffer when triggered.
ie. onchange(var).snapshot() will trigger a snapshot if var changes.
- Add alternative for "trace()" action.
Currently, to trigger a synthetic event, the name of that event is used
as the handler name, which is inconsistent with the other actions.
onchange(var).synthetic(param) where it can now be
onchange(var).trace(synthetic, param). The older method will still be
allowed, as long as the synthetic events do not overlap with other
handler names.
- The histogram documentation at testcases were updated for the new
changes.
Added a quicker way to enable set_ftrace_filter files, that will make
it much quicker to bisect tracing a function that shouldn't be traced and
crashes the kernel. (You can echo in numbers to set_ftrace_filter, and it
will select the corresponding function that is in
available_filter_functions).
Some better displaying of the tracing data (and more information was added).
The rest are small fixes and more clean ups to the code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXIXXjRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrSJAQCbGXAvZE+shfKRhbU1cu1C1nwRMHhH
eeRecJs1RChGFgD/TwatD4FzARQPjfk7snQD5KWPpoRc9grUACC2cZcaWwQ=
=LVBI
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The biggest change for this release is in the histogram code:
- Add "onchange(var)" histogram handler that executes a action when
$var changes.
- Add new "snapshot()" action for histogram handlers, that causes a
snapshot of the ring buffer when triggered. ie.
onchange(var).snapshot() will trigger a snapshot if var changes.
- Add alternative for "trace()" action. Currently, to trigger a
synthetic event, the name of that event is used as the handler
name, which is inconsistent with the other actions.
onchange(var).synthetic(param) where it can now be
onchange(var).trace(synthetic, param). The older method will still
be allowed, as long as the synthetic events do not overlap with
other handler names.
- The histogram documentation at testcases were updated for the new
changes.
Outside of the histogram code, we have:
- Added a quicker way to enable set_ftrace_filter files, that will
make it much quicker to bisect tracing a function that shouldn't be
traced and crashes the kernel. (You can echo in numbers to
set_ftrace_filter, and it will select the corresponding function
that is in available_filter_functions).
- Some better displaying of the tracing data (and more information
was added).
The rest are small fixes and more clean ups to the code"
* tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (37 commits)
tracing: Use strncpy instead of memcpy when copying comm in trace.c
tracing: Use strncpy instead of memcpy when copying comm for hist triggers
tracing: Use strncpy instead of memcpy for string keys in hist triggers
tracing: Use str_has_prefix() in synth_event_create()
x86/ftrace: Fix warning and considate ftrace_jmp_replace() and ftrace_call_replace()
tracing/perf: Use strndup_user() instead of buggy open-coded version
doc: trace: Fix documentation for uprobe_profile
tracing: Fix spelling mistake: "analagous" -> "analogous"
tracing: Comment why cond_snapshot is checked outside of max_lock protection
tracing: Add hist trigger action 'expected fail' test case
tracing: Add alternative synthetic event trace action test case
tracing: Add hist trigger onchange() handler test case
tracing: Add hist trigger snapshot() action test case
tracing: Add SPDX license GPL-2.0 license identifier to inter-event testcases
tracing: Add alternative synthetic event trace action syntax
tracing: Add hist trigger onchange() handler Documentation
tracing: Add hist trigger onchange() handler
tracing: Add hist trigger snapshot() action Documentation
tracing: Add hist trigger snapshot() action
tracing: Add conditional snapshot
...
|
||
|
Linus Torvalds
|
6bc3fe8e7e |
tools: mark 'test_vmalloc.sh' executable
Several of these scripts have come in as old-fashioned patches, and in
the process lost the executable bit. In most cases it doesn't matter,
since the test infrastructure will explicitly execute them using the
proper shell interpreter, but at least in the case of the new vmalloc
test, the lack of execurable bit caused the test to fail with
./run_vmtests: line 217: ./test_vmalloc.sh: Permission denied
because of the lacking exectuable permissions bit.
This patch fixes that up.
NOTE! A simple script to look for non-executable scripts in the kernel,
something like
git ls-files --stage -- '*.sh' |
grep 100644 |
cut -f2 |
xargs grep -l '#!'
will show that there's a lot of other files that _look_ like executable
shell scripts, but don't have the executable bit set. I considered just
scripting them all to be executable, but since it looks like the common
pattern is to not really require it, I'm just doing the minimal fix as
pointed out by the kernel test robot.
Fixes:
|
||
|
Linus Torvalds
|
8f49a658b4 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"First batch of fixes in the new merge window:
1) Double dst_cache free in act_tunnel_key, from Wenxu.
2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
ip_route_input_rcu() path, from Paolo Abeni.
3) Fix appletalk compile regression, from Arnd Bergmann.
4) If SLAB objects reach the TCP sendpage method we are in serious
trouble, so put a debugging check there. From Vasily Averin.
5) Memory leak in hsr layer, from Mao Wenan.
6) Only test GSO type on GSO packets, from Willem de Bruijn.
7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.
8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.
9) Fix race in ipv4 route exception handling, from Xin Long.
10) Missing DMA memory barrier in hns3 driver, from Jian Shen.
11) Use after free in __tcf_chain_put(), from Vlad Buslov.
12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.
13) Return value correction when ip_mc_may_pull() fails, from Eric
Dumazet.
14) Use after free in x25_device_event(), also from Eric"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
gro_cells: make sure device is up in gro_cells_receive()
vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
net/x25: fix use-after-free in x25_device_event()
isdn: mISDNinfineon: fix potential NULL pointer dereference
net: hns3: fix to stop multiple HNS reset due to the AER changes
ip: fix ip_mc_may_pull() return value
net: keep refcount warning in reqsk_free()
net: stmmac: Avoid one more sometimes uninitialized Clang warning
net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
rxrpc: Fix client call queueing, waiting for channel
tcp: handle inet_csk_reqsk_queue_add() failures
net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
fou, fou6: avoid uninit-value in gue_err() and gue6_err()
net: sched: fix potential use-after-free in __tcf_chain_put()
vhost: silence an unused-variable warning
vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
connector: fix unsafe usage of ->real_parent
vxlan: do not need BH again in vxlan_cleanup()
net: hns3: add dma_rmb() for rx description
...
|
||
|
Andrii Nakryiko
|
f38a1f0a5a |
libbpf: handle BTF parsing and loading properly
This patch splits and cleans up error handling logic for loading BTF data.
Previously, if BTF data was parsed successfully, but failed to load into
kernel, we'd report nonsensical error code, instead of error returned from
btf__load(). Now btf__new() and btf__load() are handled separately with proper
cleanup and warning reporting.
Fixes:
|
||
|
Linus Torvalds
|
5af7f11588 |
Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull tpm updates from James Morris:
- Clean up the transmission flow
Cleaned up the whole transmission flow. Locking of the chip is now
done in the level of tpm_try_get_ops() and tpm_put_ops() instead
taking the chip lock inside tpm_transmit(). The nested calls inside
tpm_transmit(), used with the resource manager, have been refactored
out.
Should make easier to perform more complex transactions with the TPM
without making the subsystem a bigger mess (e.g. encrypted channel
patches by James Bottomley).
- PPI 1.3 support
TPM PPI 1.3 introduces an additional optional command parameter that
may be needed for some commands. Display the parameter if the command
requires such a parameter. Only command 23 (SetPCRBanks) needs one.
The PPI request file will show output like this then:
# echo "23 16" > request
# cat request
23 16
# echo "5" > request
# cat request
5
- Extend all PCR banks in IMA
Instead of static PCR banks array, the array of available PCR banks
is now allocated dynamically. The digests sizes are determined
dynamically using a probe PCR read without relying crypto's static
list of hash algorithms.
This should finally make sealing of measurements in IMA safe and
secure.
- TPM 2.0 selftests
Added a test suite to tools/testing/selftests/tpm2 previously outside
of the kernel tree: https://github.com/jsakkine-intel/tpm2-scripts
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
tpm/ppi: Enable submission of optional command parameter for PPI 1.3
tpm/ppi: Possibly show command parameter if TPM PPI 1.3 is used
tpm/ppi: Display up to 101 operations as define for version 1.3
tpm/ppi: rename TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1
tpm/ppi: pass function revision ID to tpm_eval_dsm()
tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()
KEYS: trusted: explicitly use tpm_chip structure from tpm_default_chip()
tpm: move tpm_chip definition to include/linux/tpm.h
tpm: retrieve digest size of unknown algorithms with PCR read
tpm: rename and export tpm2_digest and tpm2_algorithms
tpm: dynamically allocate the allocated_banks array
tpm: remove @flags from tpm_transmit()
tpm: take TPM chip power gating out of tpm_transmit()
tpm: introduce tpm_chip_start() and tpm_chip_stop()
tpm: remove TPM_TRANSMIT_UNLOCKED flag
tpm: use tpm_try_get_ops() in tpm-sysfs.c.
tpm: remove @space from tpm_transmit()
tpm: move TPM space code out of tpm_transmit()
tpm: move tpm_validate_commmand() to tpm2-space.c
tpm: clean up tpm_try_transmit() error handling flow
...
|
||
|
Linus Torvalds
|
12ad143e1b |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Perf updates and fixes:
Kernel:
- Handle events which have the bpf_event attribute set as side band
events as they carry information about BPF programs.
- Add missing switch-case fall-through comments
Libraries:
- Fix leaks and double frees in error code paths.
- Prevent buffer overflows in libtraceevent
Tools:
- Improvements in handling Intel BT/PTS
- Add BTF ELF markers to perf trace BPF programs to improve output
- Support --time, --cpu, --pid and --tid filters for perf diff
- Calculate the column width in perf annotate as the hardcoded 6
characters for the instruction are not sufficient
- Small fixes all over the place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/core: Mark expected switch fall-through
perf/x86/intel/uncore: Fix client IMC events return huge result
perf/ring_buffer: Use high order allocations for AUX buffers optimistically
perf data: Force perf_data__open|close zero data->file.path
perf session: Fix double free in perf_data__close
perf evsel: Probe for precise_ip with simple attr
perf tools: Read and store caps/max_precise in perf_pmu
perf hist: Fix memory leak of srcline
perf hist: Add error path into hist_entry__init
perf c2c: Fix c2c report for empty numa node
perf script python: Add Python3 support to intel-pt-events.py
perf script python: Add Python3 support to event_analyzing_sample.py
perf script python: add Python3 support to check-perf-trace.py
perf script python: Add Python3 support to futex-contention.py
perf script python: Remove mixed indentation
perf diff: Support --pid/--tid filter options
perf diff: Support --cpu filter option
perf diff: Support --time filter option
perf thread: Generalize function to copy from thread addr space from intel-bts code
perf annotate: Calculate the max instruction name, align column to that
...
|
||
|
Linus Torvalds
|
96a6de1a54 |
media updates for v5.1-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcgUDlAAoJEAhfPr2O5OEV2kIP/AiHMkMGi/fXmwzN0tFjYkim 39t6rodj6rT/oMib4XvW55GjQy5sdXwz+1jE+kZA5imbUvt6YzUXFBzIBOGOIF0n 1MukKa7M6ragnm2yR+42ucBr3jcuc91/keeVzWgP2cgeZeKUlBHme+rECYnwqDdT 9rcG4U2XL0Wolbm4lAispaWYIYoOURvPeryJ244vlPmch5/2nmXbG7AgNlfJsAw4 NFmdHBWxLeyB8F95ToikhuNlTWrsvdVHPHbDaDPwioSulZ1vw+lu4CHRd1uZo2iH W0INE65ukgyenzTDbmnj5/oWCqV4KRTs8A2x6eimz+wG/60jWQjDiBLSzhxjBH7x alrwhxnW3bD31ZUCkmaGd1+3txvLf+Lup9lLX3GCBKA45dW9pzVCLfxSfNaKKlTL 0xCYSMxl5xbl8TL6hHxK7/n+LsButgTRWIoJpqkM9uPrljwzznpgqJvARqSuHEKJ 3Tvnkc2DZsmlM8L02i929BsrsoTncm6wBBVlCJzhL0VNaOuL7yJVzXhrw7b/dZZw IZu6cH5RrZhIQR4y1UPlaEZoidUGvR0+K997AsURIHJA0RolWE5eI2JHSE86EX8S bzG5SChkQmbpYt5OXQvg5VxvqVElx/5/tamcHe/rKwaAwaG9aI9HICgP2e0Zaoce YOMJUpcHtSY5Fedk8P1a =tD1x -----END PGP SIGNATURE----- Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove sensor drivers that got converted from soc_camera - remaining soc_camera drivers got moved to staging - some documentation cleanups and improvements - the imx staging driver now supports imx7 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera - the vim2m driver now does what a m2m convert driver expects to do - epoll() fixes on media subsystems - several drivers fixes, typos, cleanups and improvements * tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits) media: dvb/earth-pt1: fix wrong initialization for demod blocks media: vim2m: Address some coding style issues media: vim2m: don't use BUG() media: vim2m: speedup passthrough copy media: vim2m: add an horizontal scaler media: vim2m: don't accept YUYV anymore as output format media: vim2m: add vertical linear scaler media: vim2m: better handle cap/out buffers with different sizes media: vim2m: use different framesizes for bayer formats media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES media: vim2m: ensure that width is multiple of two media: vim2m: improve debug messages media: vim2m: add bayer capture formats media: a few more typos at staging, pci, platform, radio and usb media: Documentation: fix several typos media: staging: fix several typos media: include: fix several typos media: common: fix several typos media: v4l2-core: fix several typos media: usb: fix several typos ... |
||
|
Linus Torvalds
|
1a29e85750 |
A fairly routine cycle for docs - lots of typo fixes, some new documents,
and more translations. There's also some LICENSES adjustments from Thomas. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAlyBl54PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YxoYH/3OcInUSk17Cb+wNpnJX66dXyVvzZcuAh5aU HW5YWIIlp60jwsM0z+sVqNR51tfC+eMjw2HOWj0hOEUju7UGm7aDtB+WkEeJ7GUk e/FX+GXD/OygQtpwXRQraWU/RO3RPSB9JKodF5tQ6aihOzsQGB9c11I0/f3Qp7+U vaLBOdAlpQYemlzLKbskRZ2YpokELfpgwSb6O7mpI9i3mJeZA/lpyYSmHQxqwvG7 sqrmm7vHB7b0tZGqQISQaZNdUmSSD1lRfOX3brFw2DOIj2V2M1+O/8smBtRuAGf5 B03C7LjkNFn55tn1OHYlWEv8RpG5kH3VNc896jiWPDOXNpMSgl8= =bOsl -----END PGP SIGNATURE----- Merge tag 'docs-5.1' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "A fairly routine cycle for docs - lots of typo fixes, some new documents, and more translations. There's also some LICENSES adjustments from Thomas" * tag 'docs-5.1' of git://git.lwn.net/linux: (74 commits) docs: Bring some order to filesystem documentation Documentation/locking/lockdep: Drop last two chars of sample states doc: rcu: Suspicious RCU usage is a warning docs: driver-api: iio: fix errors in documentation Documentation/process/howto: Update for 4.x -> 5.x versioning docs: Explicitly state that the 'Fixes:' tag shouldn't split lines doc: security: Add kern-doc for lsm_hooks.h doc: sctp: Merge and clean up rst files Docs: Correct /proc/stat path scripts/spdxcheck.py: fix C++ comment style detection doc: fix typos in license-rules.rst Documentation: fix admin-guide/README.rst minimum gcc version requirement doc: process: complete removal of info about -git patches doc: translations: sync translations 'remove info about -git patches' perf-security: wrap paragraphs on 72 columns perf-security: elaborate on perf_events/Perf privileged users perf-security: document collected perf_events/Perf data categories perf-security: document perf_events/Perf resource control sysfs.txt: add note on available attribute macros docs: kernel-doc: typo "if ... if" -> "if ... is" ... |
||
|
Linus Torvalds
|
a448c643bc |
linux-kselftest-5.1-rc1
This Kselftest update for Linux 5.1-rc1 consists of - ir test compile warnings fixes - seccomp test fixes and improvements from Tycho Andersen and Kees Cook - ftrace fixes to non-POSIX-compliant constructs in colored output code and handling absence of tput from Juerg Haefliger -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAlyAMs0ACgkQCwJExA0N Qxwmmg/9HNey+j6hxIz96UvaLPqTe0cwiIOs/vrU2OQ3fBQCH+th+m9zdh+bKZKc xGRKrlDsgwuw+u3f+sYy27IZHgMc4jzLvsdd2Abw5z6jJKaVw5EnT55LWarZu/R3 xFhdWWx7+4F7XwpP9bUGTKXv1doPJoXt/VRZjuOA3h/D3PFaWklMYem7oZ0YAhQF +nVeMBv2s0iIG9sdGY7dBQ78WgZr14dyKuvrPseCKJ17ldO6R5xfT5kmziSbE5Ne Ys/LJujNaSCS9su0Ha3w/TednpOepsTiJ+4uinhJ3OBlVgRHKgjpM8g1emAm//Sf cqsT8XZbijkkvwyHLE18ccX2TmZ9HMByZTOJx4NUqR0MSzisR+Wy61AXk2RwmirF UGhjFk+ewMCAP/q5GnXgSunWmx3hGoKmMMRdIwhZIltrfC4tqESW4oucjbwVfvCA oeRlZv1LHeVLBzgWppQoUlqkZGyXeoV1HHj3AaIwqq18WsYkpm+mAAj6xaIM6Egj mdrxJLdwkmrMClaJFQYIzvAVArFBD7rh8eN12BDtifecF9tIj4WV4yYwqVx9nETd 9zNaCHy1UJorgzgCkptkSBZt84tc3C0MWb33KQP+rF4FaReq735L/DUyFQCQcqCs q2ZtiRZ+BVGJyT1oCSeS95CaQeJ2L+1h0PeoBkNl6+I8QIWntEo= =1CrX -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update fromShuah Khan: - ir test compile warnings fixes - seccomp test fixes and improvements from Tycho Andersen and Kees Cook - ftrace fixes to non-POSIX-compliant constructs in colored output code and handling absence of tput from Juerg Haefliger * tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Handle the absence of tput selftests/ftrace: Replace \e with \033 selftests/ftrace: Replace echo -e with printf selftests: ir: skip when non-root user runs the test selftests: ir: skip when lirc device doesn't exist. selftests: ir: fix warning: "%s" directive output may be truncated ’ directive output may be truncated selftests/seccomp: Actually sleep for 1/10th second selftests/harness: Update named initializer syntax selftests: unshare userns in seccomp pidns testcases selftests: set NO_NEW_PRIVS bit in seccomp user tests selftests: skip seccomp get_metadata test if not real root selftest: include stdio.h in kselftest.h selftests: fix typo in seccomp_bpf.c selftests: don't kill child immediately in get_metadata() test |
||
|
Ingo Molnar
|
b339da4803 |
perf bpf:
Arnaldo Carvalho de Melo:
- Automatically add BTF ELF markers to 'perf trace' BPF programs, so that
tools such as 'bpftool map dump' can pretty print map keys and values.
perf c2c:
Jiri Olsa:
- Fix report for empty NUMA node.
perf diff:
Jin Yao:
- Support --time, --cpu, --pid and --tid filter options.
perf probe:
Arnaldo Carvalho de Melo:
- Clarify error message about not finding kernel modules debuginfo.
perf record:
Jiri Olsa:
- Fixup probing for max attr.precise_ip.
perf trace:
Arnaldo Carvalho de Melo:
- Add missing %s lost in the 'msg_flags' recvmmsg arg when adding prefix suppression logic.
perf annotate:
Arnaldo Carvalho de Melo:
- Calculate the max instruction name, align column to that, removing the
hardcoded max 6 chars and cope with instructions with names longer than that,
such as vpmovmskb, vpcmpeqb, etc.
kernel:
Song Liu:
- Consider events with attr.bpf_event set as side-band.
Gustavo A. R. Silva:
- Mark expected switch fall-through in perf_event_parse_addr_filter().
Libraries:
Jiri Olsa:
- Fix leaks and double frees on error paths.
libtraceevent:
Tony Jones:
- Fix buffer overflow in arg_eval().
python scripting:
Tony Jones:
- More python3 fixes.
Trivial:
Yang Wei:
- Remove needless extra semicolon in clang C++ glue code.
Intel PT/BTS:
Adrian Hunter:
- Improve auxtrace address filter error message when there is no DSO.
- Fix divide by zero when TSC is not available.
- Further improvements to the export to sqlite/posgresql python scripts
and to the GUI sqlviewer, exporting 'parent_id' so that we have enable
the creation of call trees.
Andi Kleen:
- Generalize function to copy from thread addr space from intel-bts code.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXIFXsgAKCRCyPKLppCJ+
Jz++AQDVDXs1rKyZ5JDmnDpJ1tvVPZM1tTAU+6C/GnnoSDgX/AD+L3smvLoPihbu
msd3TpSroXuQ7nZ4BQ894jHyX3STqQE=
=MN9Q
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.1-20190307' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core changes from Arnaldo Carvalho de Melo:
perf bpf:
Arnaldo Carvalho de Melo:
- Automatically add BTF ELF markers to 'perf trace' BPF programs, so that
tools such as 'bpftool map dump' can pretty print map keys and values.
perf c2c:
Jiri Olsa:
- Fix report for empty NUMA node.
perf diff:
Jin Yao:
- Support --time, --cpu, --pid and --tid filter options.
perf probe:
Arnaldo Carvalho de Melo:
- Clarify error message about not finding kernel modules debuginfo.
perf record:
Jiri Olsa:
- Fixup probing for max attr.precise_ip.
perf trace:
Arnaldo Carvalho de Melo:
- Add missing %s lost in the 'msg_flags' recvmmsg arg when adding prefix suppression logic.
perf annotate:
Arnaldo Carvalho de Melo:
- Calculate the max instruction name, align column to that, removing the
hardcoded max 6 chars and cope with instructions with names longer than that,
such as vpmovmskb, vpcmpeqb, etc.
kernel:
Song Liu:
- Consider events with attr.bpf_event set as side-band.
Gustavo A. R. Silva:
- Mark expected switch fall-through in perf_event_parse_addr_filter().
Libraries:
Jiri Olsa:
- Fix leaks and double frees on error paths.
libtraceevent:
Tony Jones:
- Fix buffer overflow in arg_eval().
python scripting:
Tony Jones:
- More python3 fixes.
Trivial:
Yang Wei:
- Remove needless extra semicolon in clang C++ glue code.
Intel PT/BTS:
Adrian Hunter:
- Improve auxtrace address filter error message when there is no DSO.
- Fix divide by zero when TSC is not available.
- Further improvements to the export to sqlite/posgresql python scripts
and to the GUI sqlviewer, exporting 'parent_id' so that we have enable
the creation of call trees.
Andi Kleen:
- Generalize function to copy from thread addr space from intel-bts code.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Linus Torvalds
|
38e7571c07 |
io_uring-2019-03-06
-----BEGIN PGP SIGNATURE-----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=p78E
-----END PGP SIGNATURE-----
Merge tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block
Pull io_uring IO interface from Jens Axboe:
"Second attempt at adding the io_uring interface.
Since the first one, we've added basic unit testing of the three
system calls, that resides in liburing like the other unit tests that
we have so far. It'll take a while to get full coverage of it, but
we're working towards it. I've also added two basic test programs to
tools/io_uring. One uses the raw interface and has support for all the
various features that io_uring supports outside of standard IO, like
fixed files, fixed IO buffers, and polled IO. The other uses the
liburing API, and is a simplified version of cp(1).
This adds support for a new IO interface, io_uring.
io_uring allows an application to communicate with the kernel through
two rings, the submission queue (SQ) and completion queue (CQ) ring.
This allows for very efficient handling of IOs, see the v5 posting for
some basic numbers:
https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/
Outside of just efficiency, the interface is also flexible and
extendable, and allows for future use cases like the upcoming NVMe
key-value store API, networked IO, and so on. It also supports async
buffered IO, something that we've always failed to support in the
kernel.
Outside of basic IO features, it supports async polled IO as well.
This particular feature has already been tested at Facebook months ago
for flash storage boxes, with 25-33% improvements. It makes polled IO
actually useful for real world use cases, where even basic flash sees
a nice win in terms of efficiency, latency, and performance. These
boxes were IOPS bound before, now they are not.
This series adds three new system calls. One for setting up an
io_uring instance (io_uring_setup(2)), one for submitting/completing
IO (io_uring_enter(2)), and one for aux functions like registrating
file sets, buffers, etc (io_uring_register(2)). Through the help of
Arnd, I've coordinated the syscall numbers so merge on that front
should be painless.
Jon did a writeup of the interface a while back, which (except for
minor details that have been tweaked) is still accurate. Find that
here:
https://lwn.net/Articles/776703/
Huge thanks to Al Viro for helping getting the reference cycle code
correct, and to Jann Horn for his extensive reviews focused on both
security and bugs in general.
There's a userspace library that provides basic functionality for
applications that don't need or want to care about how to fiddle with
the rings directly. It has helpers to allow applications to easily set
up an io_uring instance, and submit/complete IO through it without
knowing about the intricacies of the rings. It also includes man pages
(thanks to Jeff Moyer), and will continue to grow support helper
functions and features as time progresses. Find it here:
git://git.kernel.dk/liburing
Fio has full support for the raw interface, both in the form of an IO
engine (io_uring), but also with a small test application (t/io_uring)
that can exercise and benchmark the interface"
* tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block:
io_uring: add a few test tools
io_uring: allow workqueue item to handle multiple buffered requests
io_uring: add support for IORING_OP_POLL
io_uring: add io_kiocb ref count
io_uring: add submission polling
io_uring: add file set registration
net: split out functions related to registering inflight socket files
io_uring: add support for pre-mapped user IO buffers
block: implement bio helper to add iter bvec pages to bio
io_uring: batch io_kiocb allocation
io_uring: use fget/fput_many() for file references
fs: add fget_many() and fput_many()
io_uring: support for IO polling
io_uring: add fsync support
Add io_uring IO interface
|
||
|
Nikita V. Shirokov
|
243b4cdab9 |
bpf, libbpf: fixing leak when kernel does not support btf
We could end up in situation when we have object file w/ all btf
info, but kernel does not support btf yet. In this situation
currently libbpf just set obj->btf to NULL w/o freeing it first.
This patch is fixing it by making sure to run btf__free first.
Fixes:
|
||
|
Linus Torvalds
|
b7af27bf94 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina: - support for something we call 'atomic replace', and allows for much better handling of cumulative patches (which is something very useful for distros), from Jason Baron with help of Petr Mladek and Joe Lawrence - improvement of handling of tasks blocking finalization, from Miroslav Benes - update of MAINTAINERS file to reflect move towards group maintainership * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits) livepatch/selftests: use "$@" to preserve argument list livepatch: Module coming and going callbacks can proceed with all listed patches livepatch: Proper error handling in the shadow variables selftest livepatch: return -ENOMEM on ptr_id() allocation failure livepatch: Introduce klp_for_each_patch macro livepatch: core: Return EOPNOTSUPP instead of ENOSYS selftests/livepatch: add DYNAMIC_DEBUG config dependency livepatch: samples: non static warnings fix livepatch: update MAINTAINERS livepatch: Remove signal sysfs attribute livepatch: Send a fake signal periodically selftests/livepatch: introduce tests livepatch: Remove ordering (stacking) of the livepatches livepatch: Atomic replace and cumulative patches documentation livepatch: Remove Nop structures when unused livepatch: Add atomic replace livepatch: Use lists to manage patches, objects and functions livepatch: Simplify API by removing registration step livepatch: Don't block the removal of patches loaded after a forced transition livepatch: Consolidate klp_free functions ... |