Here are a number of small driver fixes for 5.2-rc6
Nothing major, just fixes for reported issues:
- soundwire fixes
- thunderbolt fixes
- MAINTAINERS update for fpga maintainer change
- binder bugfix
- habanalabs 64bit pointer fix
- documentation updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyOkg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yljIgCfbK0RWqIOa4esqlpUi2+71yM89M8AmQFLdOck
gYJS7F+8cXeGEsveqAn2
=4ujv
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.2-rc6
Nothing major, just fixes for reported issues:
- soundwire fixes
- thunderbolt fixes
- MAINTAINERS update for fpga maintainer change
- binder bugfix
- habanalabs 64bit pointer fix
- documentation updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: use u64_to_user_ptr() for reading user pointers
doc: fix documentation about UIO_MEM_LOGICAL using
MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk
docs: fb: Add TER16x32 to the available font names
MAINTAINERS: fpga: hand off maintainership to Moritz
thunderbolt: Implement CIO reset correctly for Titan Ridge
binder: fix possible UAF when freeing buffer
thunderbolt: Make sure device runtime resume completes before taking domain lock
soundwire: intel: set dai min and max channels correctly
soundwire: stream: fix bad unlock balance
soundwire: stream: fix out of boundary access on port properties
Due to new challenges in my life I can no longer take care of SIOX.
Thorsten takes over my SIOX tasks.
Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de>
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Permit mux_id values up to 254 to be used in qmimux_register_device()
for compatibility with ip(8) and the rmnet driver.
Fixes: c6adf77953 ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both sysfs-bus-mdio and sysfs-class-net-phydev contain the same
duplication information. There is not currently any MDIO bus specific
attribute, but there are PHY device (struct phy_device) specific
attributes. Use the more precise description from sysfs-bus-mdio and
carry that over to sysfs-class-net-phydev.
Fixes: 86f22d04df ("net: sysfs: Document PHY device sysfs attributes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core:
* Add over-current health state
* Add standard, adaptive and custom charge types
* Add new properties for start/end charge threshold
New Drivers / Hardware:
* UCS1002 Programmable USB Port Power Controller
* Ingenic JZ47xx Battery Fuel Gauge
* AXP20x USB Power: Add AXP813 support
* AT91 poweroff: Add SAM9X60 support
* OLPC battery: Add XO-1.5 and XO-1.75 support
Misc. Changes:
* syscon-reboot: support mask property
* AXP288 fuel gauge: Blacklist ACEPC T8/T11
- Looks like some vendor thought it's a good idea to
build a desktop system with a fuel gauge, that slowly
"discharges"...
* cpcap-battery: Fix calculation errors
* misc. fixes
-----BEGIN PGP SIGNATURE-----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=qicd
-----END PGP SIGNATURE-----
Merge tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Core:
- Add over-current health state
- Add standard, adaptive and custom charge types
- Add new properties for start/end charge threshold
New Drivers / Hardware:
- UCS1002 Programmable USB Port Power Controller
- Ingenic JZ47xx Battery Fuel Gauge
- AXP20x USB Power: Add AXP813 support
- AT91 poweroff: Add SAM9X60 support
- OLPC battery: Add XO-1.5 and XO-1.75 support
Misc Changes:
- syscon-reboot: support mask property
- AXP288 fuel gauge: Blacklist ACEPC T8/T11. Looks like some vendor
thought it's a good idea to build a desktop system with a fuel
gauge, that slowly "discharges"...
- cpcap-battery: Fix calculation errors
- misc fixes"
* tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
power: supply: olpc_battery: force the le/be casts
power: supply: ucs1002: Fix build error without CONFIG_REGULATOR
power: supply: ucs1002: Fix wrong return value checking
power: supply: Add driver for Microchip UCS1002
dt-bindings: power: supply: Add bindings for Microchip UCS1002
power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant
power: supply: core: fix clang -Wunsequenced
power: supply: core: Add missing documentation for CHARGE_CONTROL_* properties
power: supply: core: Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties
power: supply: core: Add Standard, Adaptive, and Custom charge types
power: supply: axp288_fuel_gauge: Add ACEPC T8 and T11 mini PCs to the blacklist
power: supply: bq27xxx_battery: Notify also about status changes
power: supply: olpc_battery: Have the framework register sysfs files for us
power: supply: olpc_battery: Add OLPC XO 1.75 support
power: supply: olpc_battery: Avoid using platform_info
power: supply: olpc_battery: Use devm_power_supply_register()
power: supply: olpc_battery: Move priv data to a struct
power: supply: olpc_battery: Use DT to get battery version
x86/platform/olpc: Use a correct version when making up a battery node
x86/platform/olpc: Trivial code move in DT fixup
...
Pull x86 MDS mitigations from Thomas Gleixner:
"Microarchitectural Data Sampling (MDS) is a hardware vulnerability
which allows unprivileged speculative access to data which is
available in various CPU internal buffers. This new set of misfeatures
has the following CVEs assigned:
CVE-2018-12126 MSBDS Microarchitectural Store Buffer Data Sampling
CVE-2018-12130 MFBDS Microarchitectural Fill Buffer Data Sampling
CVE-2018-12127 MLPDS Microarchitectural Load Port Data Sampling
CVE-2019-11091 MDSUM Microarchitectural Data Sampling Uncacheable Memory
MDS attacks target microarchitectural buffers which speculatively
forward data under certain conditions. Disclosure gadgets can expose
this data via cache side channels.
Contrary to other speculation based vulnerabilities the MDS
vulnerability does not allow the attacker to control the memory target
address. As a consequence the attacks are purely sampling based, but
as demonstrated with the TLBleed attack samples can be postprocessed
successfully.
The mitigation is to flush the microarchitectural buffers on return to
user space and before entering a VM. It's bolted on the VERW
instruction and requires a microcode update. As some of the attacks
exploit data structures shared between hyperthreads, full protection
requires to disable hyperthreading. The kernel does not do that by
default to avoid breaking unattended updates.
The mitigation set comes with documentation for administrators and a
deeper technical view"
* 'x86-mds-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/speculation/mds: Fix documentation typo
Documentation: Correct the possible MDS sysfs values
x86/mds: Add MDSUM variant to the MDS documentation
x86/speculation/mds: Add 'mitigations=' support for MDS
x86/speculation/mds: Print SMT vulnerable on MSBDS with mitigations off
x86/speculation/mds: Fix comment
x86/speculation/mds: Add SMT warning message
x86/speculation: Move arch_smt_update() call to after mitigation decisions
x86/speculation/mds: Add mds=full,nosmt cmdline option
Documentation: Add MDS vulnerability documentation
Documentation: Move L1TF to separate directory
x86/speculation/mds: Add mitigation mode VMWERV
x86/speculation/mds: Add sysfs reporting for MDS
x86/speculation/mds: Add mitigation control for MDS
x86/speculation/mds: Conditionally clear CPU buffers on idle entry
x86/kvm/vmx: Add MDS protection when L1D Flush is not active
x86/speculation/mds: Clear CPU buffers on exit to user
x86/speculation/mds: Add mds_clear_cpu_buffers()
x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests
x86/speculation/mds: Add BUG_MSBDS_ONLY
...
CrOS EC:
- Add EC host command support using rpmsg
- Add new CrOS USB PD logging driver
- Transfer spi messages at high priority
- Add support to trace CrOS EC commands
- Minor fixes and cleanups in protocol and debugfs
Wilco EC:
- Standardize Wilco EC mailbox interface
- Add h1_gpio status to debugfs
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlzV61YACgkQHwn1ewov
5lgEFw//S7GVmBrFxcqu5wAjF1CW+mOGi3y6nVuTAHanWG/hJGWT+itOwsdDp6c9
TggYgohprz64JAZOPqPCTonV/qbxgsfKrSQRxFDtHH4F1iEUF46fnlsULDKi8VwM
Qzj4g4d//ePsOwHOsYVrbJRU2qKyF6Rm2hpOxKfI9u2Dv5fxLFu6fxUhrSq1Inr6
U67j7pxBwOnBtN2A6hMKHZaOUVkSNYT6azSPO3Z2YH0aky2Baxw/LPoRnbCNhwUQ
iyneX5+K0wpCz2fpnBF/QSh1QBACeyfrO6HHA+flfaejhShaWttrS36Gar+sdHFN
p6eeR1CoEJZbRY79Eetj8Cv5Be1ivVG/SC5JF4O1apAAn87wXLI6AaLG/03ul0vc
KOkcjrXMxISRlAUr+OKD0rg3Uo2oI0ht70XMT9DDsCRNDoVHvkDQJNdkWrKq+E1c
xL4YeLofZpcEN+Oe/WnwUZtYUdY3qcWs+C4hV+h0L0Ke5xir25DEUfF3j3J/uK2B
JEgkTpH8j6YjbGAErBPkTxWt5HE3oWtkK4moPlrfPKfxoSo2eRDvqz68qHsgIn8p
WBM+FSr+dQ7qyYDigMKrFSesiBpwCBI4lIgPxkvTxqbubaoZcsABHm3BUGjykXII
E5z2qsgRnDrB+uGGDkTvDoR0Kr3U0hGlag7u/N61H86PoiMLUig=
=NF5N
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"CrOS EC:
- Add EC host command support using rpmsg
- Add new CrOS USB PD logging driver
- Transfer spi messages at high priority
- Add support to trace CrOS EC commands
- Minor fixes and cleanups in protocol and debugfs
Wilco EC:
- Standardize Wilco EC mailbox interface
- Add h1_gpio status to debugfs"
* tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_proto: Add trace event to trace EC commands
platform/chrome: cros_ec_debugfs: Use cros_ec_cmd_xfer_status helper
platform/chrome: cros_ec: Add EC host command support using rpmsg
platform/chrome: wilco_ec: Add h1_gpio status to debugfs
platform/chrome: wilco_ec: Standardize mailbox interface
platform/chrome: cros_ec_proto: check for NULL transfer function
platform/chrome: Add CrOS USB PD logging driver
platform/chrome: cros_ec_spi: Transfer messages at high priority
platform/chrome: cros_ec_debugfs: no need to check return value of debugfs_create functions
platform/chrome: cros_ec_debugfs: Remove dev_warn when console log is not supported
Pull i2c updates from Wolfram Sang:
- API for late atomic transfers (e.g. to shut down via PMIC). We have a
seperate callback now which is called under clearly defined
conditions. In-kernel users are converted, too.
- new driver for the AMD PCIe MP2 I2C controller
- large refactoring for at91 and bcm-iproc (both gain slave support due
to this)
- and a good share of various driver improvements anf fixes
* 'i2c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (57 commits)
dt-bindings: i2c: riic: document r7s9210 support
i2c: imx-lpi2c: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
i2c-piix4: Add Hygon Dhyana SMBus support
i2c: core: apply 'is_suspended' check for SMBus, too
i2c: core: ratelimit 'transfer when suspended' errors
i2c: iproc: Change driver to use 'BIT' macro
i2c: riic: Add Runtime PM support
i2c: mux: demux-pinctrl: use struct_size() in devm_kzalloc()
i2c: mux: pca954x: allow management of device idle state via sysfs
i2c: mux: pca9541: remove support for unused platform data
i2c: mux: pca954x: remove support for unused platform data
dt-bindings: i2c: i2c-mtk: add support for MT8516
i2c: axxia: use auto cmd for last message
i2c: gpio: flag atomic capability if possible
i2c: algo: bit: add flag to whitelist atomic transfers
i2c: stu300: use xfer_atomic callback to bail out early
i2c: ocores: enable atomic xfers
i2c: ocores: refactor setup for polling
i2c: tegra-bpmp: convert to use new atomic callbacks
i2c: omap: Add the master_xfer_atomic hook
...
- Lots of work on the Chinese and Italian translations
- Some license-rules clarifications from Christoph
- Various build-script fixes
- A new document on memory models
- RST conversion of the live-patching docs
- The usual collection of typo fixes and corrections.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAlzSBFkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YUDgIAIn+I0Wjv/vkuh5SKwAmz2wZBf46FCICz7Vg
jePmhd1GQ3K9k/xzIKMoaJOipAl+IXT4AnGa9eu+9Xm+D6HejASvtt/uTce4+qPi
9VLu7GmbtQQ0imRi4jjitenrebQXSKudAYbH+/bz7ycH7twWVJWKNLNQ8im9U5Ul
LRXQhRsYc2SwJ4mGOGTrqZkb69qkiOy0dQFGKbSM3ipHs/CQy8XMhlY/7aAh7t9N
SmKyH341s4Z/dRZIpoSx2QOfSp7njwTw7hxrnOq5unB82u2zrYvVFGxp5kzfQIyC
B/q26TG5hVNGH/37/+yOoziyP3Ma8IuF5W0zcg9DbmIi0Gdvg7s=
=4Zhc
-----END PGP SIGNATURE-----
Merge tag 'docs-5.2' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A reasonably busy cycle for docs, including:
- Lots of work on the Chinese and Italian translations
- Some license-rules clarifications from Christoph
- Various build-script fixes
- A new document on memory models
- RST conversion of the live-patching docs
- The usual collection of typo fixes and corrections"
* tag 'docs-5.2' of git://git.lwn.net/linux: (140 commits)
docs/livepatch: Unify style of livepatch documentation in the ReST format
docs: livepatch: convert docs to ReST and rename to *.rst
scripts/documentation-file-ref-check: detect broken :doc:`foo`
scripts/documentation-file-ref-check: don't parse Next/ dir
LICENSES: Rename other to deprecated
LICENSES: Clearly mark dual license only licenses
docs: Don't reference the ZLib license in license-rules.rst
docs/vm: Minor editorial changes in the THP and hugetlbfs
docs/vm: add documentation of memory models
doc:it_IT: translation alignment
doc: fix typo in PGP guide
dontdiff: update with Kconfig build artifacts
docs/zh_CN: fix typos in 1.Intro.rst file
docs/zh_CN: redirect CoC docs to Chinese version
doc: mm: migration doesn't use FOLL_SPLIT anymore
docs: doc-guide: remove the extension from .rst files
doc: kselftest: Fix KBUILD_OUTPUT usage instructions
docs: trace: fix some Sphinx warnings
docs: speculation.txt: mark example blocks as such
docs: ntb.txt: add blank lines to clean up some Sphinx warnings
...
-----BEGIN PGP SIGNATURE-----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=v2pN
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.2' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Some minor cleanups for the IPMI driver"
* tag 'for-linus-5.2' of git://github.com/cminyard/linux-ipmi:
ipmi: Remove warning if no slave address is present
ipmi:ssif: Only unregister the platform driver if it was registered
ipmi:ssif: compare block number correctly for multi-part return messages
ipmi: Add the i2c-addr property for SSIF interfaces
char/ipmi: fix spelling mistake "receieved_messages" -> "received_messages"
ipmi: avoid atomic_inc in exit function
ipmi: Remove file from ipmi_file_private
ipmi_si: remove an unused variable in try_smi_init()
ipmi: Make ipmi_interfaces_srcu variable static
Here is the big set of USB and PHY driver patches for 5.2-rc1
There is the usual set of:
- USB gadget updates
- PHY driver updates and additions
- USB serial driver updates and fixes
- typec updates and new chips supported
- mtu3 driver updates
- xhci driver updates
- other tiny driver updates
Nothing really interesting, just constant forward progress.
All of these have been in linux-next for a while with no reported
issues. The usb-gadget and usb-serial trees were merged a bit "late",
but both of them had been in linux-next before they got merged here last
Friday.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNKuwg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymRUgCfa8Ri7KrCaBR5NHQcLhbdrX90ToQAmgNw7vpo
fqt0XpNM0CSa9O/gOr79
=8HFh
-----END PGP SIGNATURE-----
Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver patches for 5.2-rc1
There is the usual set of:
- USB gadget updates
- PHY driver updates and additions
- USB serial driver updates and fixes
- typec updates and new chips supported
- mtu3 driver updates
- xhci driver updates
- other tiny driver updates
Nothing really interesting, just constant forward progress.
All of these have been in linux-next for a while with no reported
issues. The usb-gadget and usb-serial trees were merged a bit "late",
but both of them had been in linux-next before they got merged here
last Friday"
* tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits)
USB: serial: f81232: implement break control
USB: serial: f81232: add high baud rate support
USB: serial: f81232: clear overrun flag
USB: serial: f81232: fix interrupt worker not stop
usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
usb: dwc3: Fix default lpm_nyet_threshold value
usb: dwc3: debug: Print GET_STATUS(device) tracepoint
usb: dwc3: Do core validation early on probe
usb: dwc3: gadget: Set lpm_capable
usb: gadget: atmel: tie wake lock to running clock
usb: gadget: atmel: support USB suspend
usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
dwc2: gadget: Fix completed transfer size calculation in DDMA
usb: dwc2: Set lpm mode parameters depend on HW configuration
usb: dwc2: Fix channel disable flow
usb: dwc2: Set actual frame number for completed ISOC transfer
usb: gadget: do not use __constant_cpu_to_le16
usb: dwc2: gadget: Increase descriptors count for ISOC's
usb: introduce usb_ep_type_string() function
usb: dwc3: move synchronize_irq() out of the spinlock protected block
...
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
Convert livepatch documentation to ReST format. The changes
are mostly trivial, as the documents are already on a good
shape. Just a few markup changes are needed for Sphinx to
properly parse the docs.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- The in-file TOC becomes a comment, in order to skip it from the
output, as Sphinx already generates an index there.
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small driver
subsystems" these days. Which is fine with me, if it makes things
easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
f6V3MvRffg4qUp3cGbU=
=R37j
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc update part 2 from Greg KH:
"Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small
driver subsystems" these days. Which is fine with me, if it makes
things easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
intel_th: msu: Add current window tracking
intel_th: msu: Add a sysfs attribute to trigger window switch
intel_th: msu: Correct the block wrap detection
intel_th: Add switch triggering support
intel_th: gth: Factor out trace start/stop
intel_th: msu: Factor out pipeline draining
intel_th: msu: Switch over to scatterlist
intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
intel_th: Only report useful IRQs to subdevices
intel_th: msu: Start handling IRQs
intel_th: pci: Use MSI interrupt signalling
intel_th: Communicate IRQ via resource
intel_th: Add "rtit" source device
intel_th: Skip subdevices if their MMIO is missing
intel_th: Rework resource passing between glue layers and core
intel_th: SPDX-ify the documentation
intel_th: msu: Fix single mode with IOMMU
coresight: funnel: Support static funnel
dt-bindings: arm: coresight: Unify funnel DT binding
coresight: replicator: Add new device id for static replicator
...
Here is the big staging and iio driver update for 5.2-rc1.
Lots of tiny fixes all over the staging and IIO driver trees here, along
with some new IIO drivers.
Also we ended up deleting two drivers, making this pull request remove a
few hundred thousand lines of code, always a nice thing to see. Both of
the drivers removed have been replaced with "real" drivers in their
various subsystem directories, and they will be coming to you from those
locations during this merge window.
There are some core vt/selection changes in here, that was due to some
cleanups needed for the speakup fixes. Those have all been acked by the
various subsystem maintainers (i.e. me), so those are ok.
We also added a few new drivers, for some odd hardware, giving new
developers plenty to work on with basic coding style cleanups to come in
the near future.
Other than that, nothing unusual here.
All of these have been in linux-next for a while with no reported
issues, other than an odd gcc warning for one of the new drivers that
should be fixed up soon.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHGMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynQRACgwtlC6DFsEFwCplYxQXP5uzuIVTMAoJ61xzC0
Qim7K31f5ulaa3GJuhzo
=zEY5
-----END PGP SIGNATURE-----
Merge tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big staging and iio driver update for 5.2-rc1.
Lots of tiny fixes all over the staging and IIO driver trees here,
along with some new IIO drivers.
The "counter" subsystem was added in here as well, as it is needed by
the IIO drivers and subsystem.
Also we ended up deleting two drivers, making this pull request remove
a few hundred thousand lines of code, always a nice thing to see. Both
of the drivers removed have been replaced with "real" drivers in their
various subsystem directories, and they will be coming to you from
those locations during this merge window.
There are some core vt/selection changes in here, that was due to some
cleanups needed for the speakup fixes. Those have all been acked by
the various subsystem maintainers (i.e. me), so those are ok.
We also added a few new drivers, for some odd hardware, giving new
developers plenty to work on with basic coding style cleanups to come
in the near future.
Other than that, nothing unusual here.
All of these have been in linux-next for a while with no reported
issues, other than an odd gcc warning for one of the new drivers that
should be fixed up soon"
[ I fixed up the warning myself - Linus ]
* tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits)
staging: kpc2000: kpc_spi: Fix build error for {read,write}q
Staging: rtl8192e: Remove extra space before break statement
Staging: rtl8192u: ieee80211: Fix if-else indentation warning
Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces
staging: most: cdev: fix chrdev_region leak in mod_exit
staging: wlan-ng: Fix improper SPDX comment style
staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch
staging: vc04_services: bcm2835-camera: Compress two lines into one line
staging: rtl8723bs: core: Use !x in place of NULL comparison.
staging: rtl8723bs: core: Prefer using the BIT Macro.
staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling
staging: kpc2000: fix up build problems with readq()
staging: rtlwifi: move remaining phydm .h files
staging: rtlwifi: strip down phydm .h files
staging: rtlwifi: delete the staging driver
staging: fieldbus: anybus-s: rename bus id field to avoid confusion
staging: fieldbus: anybus-s: keep device bus id in bus endianness
Staging: sm750fb: Change *array into *const array
staging: rtl8192u: ieee80211: Fix spelling mistake
staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro
...
- Fix the handling of Performance and Energy Bias Hint (EPB) on
Intel processors and expose it to user space via sysfs to avoid
having to access it through the generic MSR I/F (Rafael Wysocki).
- Improve the handling of global turbo changes made by the platform
firmware in the intel_pstate driver (Rafael Wysocki).
- Convert some slow-path static_cpu_has() callers to boot_cpu_has()
in cpufreq (Borislav Petkov).
- Fix the frequency calculation loop in the armada-37xx cpufreq
driver (Gregory CLEMENT).
- Fix possible object reference leaks in multuple cpufreq drivers
(Wen Yang).
- Fix kerneldoc comment in the centrino cpufreq driver (dongjian).
- Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
Kumar).
- Add support for lx2160a and ls1028a to the qoriq cpufreq driver
(Vabhav Sharma, Yuantian Tang).
- Fix kobject memory leak in the cpufreq core (Viresh Kumar).
- Simplify the IOwait boosting in the schedutil cpufreq governor
and rework the TSC cpufreq notifier on x86 (Rafael Wysocki).
- Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).
- Improve the cpufreq documentation, add SPDX license tags to
some PM documentation files and unify copyright notices in
them (Rafael Wysocki).
- Add support for "CPU" domains to the generic power domains (genpd)
framework and provide low-level PSCI firmware support for that
feature (Ulf Hansson).
- Rearrange the PSCI firmware support code and add support for
SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).
- Improve genpd support for devices in multiple power domains (Ulf
Hansson).
- Unify target residency for the AFTR and coupled AFTR states in the
exynos cpuidle driver (Marek Szyprowski).
- Introduce new helper routine in the operating performance points
(OPP) framework (Andrew-sh.Cheng).
- Add support for passing on-die termination (ODT) and auto power
down parameters from the kernel to Trusted Firmware-A (TF-A) to
the rk3399_dmc devfreq driver (Enric Balletbo i Serra).
- Add tracing to devfreq (Lukasz Luba).
- Make the exynos-bus devfreq driver suspend all devices on system
shutdown (Marek Szyprowski).
- Fix a few minor issues in the devfreq subsystem and clean it up
somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
Saravana Kannan, Yangtao Li).
- Improve system wakeup diagnostics (Stephen Boyd).
- Rework filesystem sync messages emitted during system suspend and
hibernation (Harry Pan).
-----BEGIN PGP SIGNATURE-----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=nY9p
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These fix the (Intel-specific) Performance and Energy Bias Hint (EPB)
handling and expose it to user space via sysfs, fix and clean up
several cpufreq drivers, add support for two new chips to the qoriq
cpufreq driver, fix, simplify and clean up the cpufreq core and the
schedutil governor, add support for "CPU" domains to the generic power
domains (genpd) framework and provide low-level PSCI firmware support
for that feature, fix the exynos cpuidle driver and fix a couple of
issues in the devfreq subsystem and clean it up.
Specifics:
- Fix the handling of Performance and Energy Bias Hint (EPB) on Intel
processors and expose it to user space via sysfs to avoid having to
access it through the generic MSR I/F (Rafael Wysocki).
- Improve the handling of global turbo changes made by the platform
firmware in the intel_pstate driver (Rafael Wysocki).
- Convert some slow-path static_cpu_has() callers to boot_cpu_has()
in cpufreq (Borislav Petkov).
- Fix the frequency calculation loop in the armada-37xx cpufreq
driver (Gregory CLEMENT).
- Fix possible object reference leaks in multuple cpufreq drivers
(Wen Yang).
- Fix kerneldoc comment in the centrino cpufreq driver (dongjian).
- Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
Kumar).
- Add support for lx2160a and ls1028a to the qoriq cpufreq driver
(Vabhav Sharma, Yuantian Tang).
- Fix kobject memory leak in the cpufreq core (Viresh Kumar).
- Simplify the IOwait boosting in the schedutil cpufreq governor and
rework the TSC cpufreq notifier on x86 (Rafael Wysocki).
- Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).
- Improve the cpufreq documentation, add SPDX license tags to some PM
documentation files and unify copyright notices in them (Rafael
Wysocki).
- Add support for "CPU" domains to the generic power domains (genpd)
framework and provide low-level PSCI firmware support for that
feature (Ulf Hansson).
- Rearrange the PSCI firmware support code and add support for
SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).
- Improve genpd support for devices in multiple power domains (Ulf
Hansson).
- Unify target residency for the AFTR and coupled AFTR states in the
exynos cpuidle driver (Marek Szyprowski).
- Introduce new helper routine in the operating performance points
(OPP) framework (Andrew-sh.Cheng).
- Add support for passing on-die termination (ODT) and auto power
down parameters from the kernel to Trusted Firmware-A (TF-A) to the
rk3399_dmc devfreq driver (Enric Balletbo i Serra).
- Add tracing to devfreq (Lukasz Luba).
- Make the exynos-bus devfreq driver suspend all devices on system
shutdown (Marek Szyprowski).
- Fix a few minor issues in the devfreq subsystem and clean it up
somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
Saravana Kannan, Yangtao Li).
- Improve system wakeup diagnostics (Stephen Boyd).
- Rework filesystem sync messages emitted during system suspend and
hibernation (Harry Pan)"
* tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: Fix kobject memleak
cpufreq: armada-37xx: fix frequency calculation for opp
cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
cpufreq: qoriq: add support for lx2160a
x86: tsc: Rework time_cpufreq_notifier()
PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
PM / Domains: Search for the CPU device outside the genpd lock
PM / Domains: Drop unused in-parameter to some genpd functions
PM / Domains: Use the base device for driver_deferred_probe_check_state()
cpufreq: qoriq: Add ls1028a chip support
PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
PM / Domains: Don't kfree() the virtual device in the error path
cpufreq: Move ->get callback check outside of __cpufreq_get()
PM / Domains: remove unnecessary unlikely()
cpufreq: Remove needless bios_limit check in show_bios_limit()
drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
firmware/psci: add support for SYSTEM_RESET2
PM / devfreq: add tracing for scheduling work
trace: events: add devfreq trace event file
...
Now that we have the means to trigger a window switch for the MSU trace
store, add a sysfs file to allow triggering it from userspace.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT and
POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX properties
don't have documentation. I add that documentation here.
v5 changes:
- Split this commit out from the previous two commits.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD
and POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD properties, to expand
the existing CHARGE_CONTROL_* properties. I am adding them in order
to support a new Chrome OS device, but these properties should be
general enough that they can be used on other devices.
When the charge_type is "Custom", the charge controller uses the
POWER_SUPPLY_PROP_CHARGE_CONTROL_* properties as configuration for some
other algorithm. For example, in the use case that I am supporting,
this means the battery begins charging when the percentage
level drops below POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD and
charging ceases when the percentage level goes above
POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD.
v5 changes:
- Add the other missing CHARGE_CONTROL_* properties documentation in
a separate commit
- Split up adding the charge types and adding the
POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD and
POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD properties into
two different commits.
v4 changes:
- Add documentation for the new properties, and add documentation for
the the previously missing charge_control_limit and
charge_control_limit_max properties.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add "Standard", "Adaptive", and "Custom" modes to the charge_type
property, to expand the existing "Trickle" and "Fast" modes.
I am adding them in order to support a new Chrome OS device,
but these properties should be general enough that they can be
used on other devices.
The meaning of "Standard" is obvious, but "Adaptive" and "Custom" are
more tricky: "Adaptive" means that the charge controller uses some
custom algorithm to change the charge type automatically, with no
configuration needed. "Custom" means that the charge controller uses the
POWER_SUPPLY_PROP_CHARGE_CONTROL_* properties as configuration for some
other algorithm.
v5 changes:
- Split up adding the charge types and adding the
POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD and
POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD properties into
two different commits.
v4 changes:
- Add documentation for the new properties, and add documentation for
the the previously missing charge_control_limit and
charge_control_limit_max properties.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This adds documentation for the specific prescaler entry.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IIO counter subdirectory is now superceded by the Counter subsystem.
This patch adds deprecation warnings to the documentation of the
relevant IIO Counter sysfs attributes.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds standard documentation for the Generic Counter interface
userspace sysfs attributes of the 104-QUAD-8 driver.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds standard documentation for the userspace sysfs
attributes of the Generic Counter interface.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose mei device state to user-space through sysfs.
This gives indication to applications that driver is in transition,
usefully mostly to detect link reset state.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change will send an OFFLINE event to udev with the ERROR=DEAD
environment variable set when the HC dies.
By notifying user space the appropriate policies can be applied.
i.e.,
* Collect error logs.
* Notify the user that USB is no longer functional.
* Perform a graceful reboot.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CCGx has two copies of the firmware in addition to the bootloader.
If the device is running FW1, FW2 can be updated with the new version.
Dual firmware mode allows the CCG device to stay in a PD contract and
support USB PD and Type-C functionality while a firmware update is in
progress.
First we read the currently flashed firmware version of both
primary and secondary firmware and then compare it with
version of firmware file to determine if flashing is required.
Command framework is added to support sending commands to CCGx
controller. We wait for response after sending the command and then
read the response from RAB_RESPONSE register.
Below commands are supported,
- ENTER_FLASHING
- RESET
- PDPORT_ENABLE
- JUMP_TO_BOOT
- FLASH_ROW_RW
- VALIDATE_FW
Command specific mutex lock is also added to sync between driver
and user threads.
PD port number information is added which is required while sending
PD_PORT_ENABLE command
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
[ heikki: Added ABI documentation. ]
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The behaviour, by default, to not deselect after each transfer is
unsafe when there is a device with an address that conflicts with
another device on another mux on the same parent bus, and it
may not be convenient to use devicetree to set the deselect mux,
e.g. when running on x86_64 when ACPI is used to discover most of the
device hierarchy.
Therefore, provide the ability to set the idle state behaviour using a
new sysfs file, idle_state as a complement to the method of
instantiating the device via sysfs. The possible behaviours are
disconnect, i.e. to deselect all channels from the mux, as-is (the
default), i.e. leave the last channel selected, and set a
predetermined channel.
The current behaviour of leaving the channel as-is after each
transaction is preserved.
Signed-off-by: Robert Shearman <robert.shearman@att.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
There is a spelling mistake in the documentation. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20190418101502.9748-1-colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
As part of Chrome OS's FAFT (Fully Automated Firmware Testing)
tests, we need to ensure that the H1 chip is properly setting
some GPIO lines. The h1_gpio attribute exposes the state
of the lines:
- ENTRY_TO_FACT_MODE in BIT(0)
- SPI_CHROME_SEL in BIT(1)
There are two reasons that I am exposing this in debugfs,
and not as a GPIO:
1. This is only useful for testing, so end users shouldn't ever
care about this. In fact, if it passes the tests, then the value of
h1_gpio will always be 2, so it would be really uninteresting for users.
2. This GPIO is not connected to, controlled by, or really even related
to the AP. The GPIO runs between the EC and the H1 security chip.
Changes in v4:
- Use "0x02x\n" instead of "02x\n" for format string
- Use DEFINE_DEBUGFS_ATTRIBUTE()
- Add documentation
Changes in v3:
- Fix documentation to correspond with formatting change in v2.
Changes in v2:
- Zero out the unused fields in the request.
- Format result as "%02x\n" instead of as a decimal.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The current API for the wilco EC mailbox interface is bad.
It assumes that most messages sent to the EC follow a similar structure,
with a command byte in MBOX[0], followed by a junk byte, followed by
actual data. This doesn't happen in several cases, such as setting the
RTC time, using the raw debugfs interface, and reading or writing
properties such as the Peak Shift policy (this last to be submitted soon).
Similarly for the response message from the EC, the current interface
assumes that the first byte of data is always 0, and the second byte
is unused. However, in both setting and getting the RTC time, in the
debugfs interface, and for reading and writing properties, this isn't
true.
The current way to resolve this is to use WILCO_EC_FLAG_RAW* flags to
specify when and when not to skip these initial bytes in the sent and
received message. They are confusing and used so much that they are
normal, and not exceptions. In addition, the first byte of
response in the debugfs interface is still always skipped, which is
weird, since this raw interface should be giving the entire result.
Additionally, sent messages assume the first byte is a command, and so
struct wilco_ec_message contains the "command" field. In setting or
getting properties however, the first byte is not a command, and so this
field has to be filled with a byte that isn't actually a command. This
is again inconsistent.
wilco_ec_message contains a result field as well, copied from
wilco_ec_response->result. The message result field should be removed:
if the message fails, the cause is already logged, and the callers are
alerted. They will never care about the actual state of the result flag.
These flags and different cases make the wilco_ec_transfer() function,
used in wilco_ec_mailbox(), really gross, dealing with a bunch of
different cases. It's difficult to figure out what it is doing.
Finally, making these assumptions about the structure of a message make
it so that the messages do not correspond well with the specification
for the EC's mailbox interface. For instance, this interface
specification may say that MBOX[9] in the received message contains
some information, but the calling code needs to remember that the first
byte of response is always skipped, and because it didn't set the
RESPONSE_RAW flag, the next byte is also skipped, so this information
is actually contained within wilco_ec_message->response_data[7]. This
makes it difficult to maintain this code in the future.
To fix these problems this patch standardizes the mailbox interface by:
- Removing the WILCO_EC_FLAG_RAW* flags
- Removing the command and reserved_raw bytes from wilco_ec_request
- Removing the mbox0 byte from wilco_ec_response
- Simplifying wilco_ec_transfer() because of these changes
- Gives the callers of wilco_ec_mailbox() the responsibility of exactly
and consistently defining the structure of the mailbox request and
response
- Removing command and result from wilco_ec_message.
This results in the reduction of total code, and makes it much more
maintainable and understandable.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The Performance and Energy Bias Hint (EPB) is expected to be set by
user space through the generic MSR interface, but that interface is
not particularly nice and there are security concerns regarding it,
so it is not always available.
For this reason, add a sysfs interface for reading and updating the
EPB, in the form of a new attribute, energy_perf_bias, located
under /sys/devices/system/cpu/cpu#/power/ for online CPUs that
support the EPB feature.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Borislav Petkov <bp@suse.de>
This patch adds support for Maxim MAX31856 thermocouple
temperature sensor support.
More information can be found in:
https://www.maximintegrated.com/en/ds/MAX31856.pdf
NOTE: Driver support only Comparator Mode.
Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add an ABI documentation for the ad5933 driver.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
4.22 have never existed and this change was actually added to 5.0
hence fix the numbering.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make the /sys/devices/system/cpu/smt/* files available on all arches, so
user space has a consistent way to detect whether SMT is enabled.
The 'control' file now shows 'notimplemented' for architectures which
don't yet have CONFIG_HOTPLUG_SMT.
[ tglx: Make notimplemented a real state ]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Link: https://lkml.kernel.org/r/469c2b98055f2c41e75748e06447d592a64080c9.1553635520.git.jpoimboe@redhat.com
- Drop license boilerplate (obsoleted by SPDX license IDs),
by Sven Eckelmann
- Drop documentation for sysfs and debugfs Documentation,
by Sven Eckelmann (2 patches)
- Mark sysfs as optional and deprecated, by Sven Eckelmann (3 patches)
- Update MAINTAINERS Tree, Chat and Bugtracker,
by Sven Eckelmann (3 patches)
- Rename batadv_dat_send_data, by Sven Eckelmann
- update DAT entries with incoming ARP replies, by Linus Luessing
- add multicast-to-unicast support for limited destinations,
by Linus Luessing
-----BEGIN PGP SIGNATURE-----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=WB31
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20190328' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- Drop license boilerplate (obsoleted by SPDX license IDs),
by Sven Eckelmann
- Drop documentation for sysfs and debugfs Documentation,
by Sven Eckelmann (2 patches)
- Mark sysfs as optional and deprecated, by Sven Eckelmann (3 patches)
- Update MAINTAINERS Tree, Chat and Bugtracker,
by Sven Eckelmann (3 patches)
- Rename batadv_dat_send_data, by Sven Eckelmann
- update DAT entries with incoming ARP replies, by Linus Luessing
- add multicast-to-unicast support for limited destinations,
by Linus Luessing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The sysfs files are replaced by the batadv generic netlink family. The old
sysfs configuration interface was frowned upon by other kernel developers.
But the files cannot be removed immediately because userspace tools might
still depend on it. Instead schedule for its removal in 2021.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
We've continued mainly to fix bugs in this round, as f2fs has been shipped
in more devices. Especially, we've focused on stabilizing checkpoint=disable
feature, and provided some interfaces for QA.
Enhancement:
- expose FS_NOCOW_FL for pin_file
- run discard jobs at unmount time with timeout
- tune discarding thread to avoid idling which consumes power
- some checking codes to address vulnerabilities
- give random value to i_generation
- shutdown with more flags for QA
Bug fix:
- clean up stale objects when mount is failed along with checkpoint=disable
- fix system being stuck due to wrong count by atomic writes
- handle some corrupted disk cases
- fix a deadlock in f2fs_read_inline_dir
We've also added some minor build errors and clean-up patches.
-----BEGIN PGP SIGNATURE-----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=9BoH
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"We've continued mainly to fix bugs in this round, as f2fs has been
shipped in more devices. Especially, we've focused on stabilizing
checkpoint=disable feature, and provided some interfaces for QA.
Enhancements:
- expose FS_NOCOW_FL for pin_file
- run discard jobs at unmount time with timeout
- tune discarding thread to avoid idling which consumes power
- some checking codes to address vulnerabilities
- give random value to i_generation
- shutdown with more flags for QA
Bug fixes:
- clean up stale objects when mount is failed along with
checkpoint=disable
- fix system being stuck due to wrong count by atomic writes
- handle some corrupted disk cases
- fix a deadlock in f2fs_read_inline_dir
We've also added some minor build error fixes and clean-up patches"
* tag 'f2fs-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (53 commits)
f2fs: set pin_file under CAP_SYS_ADMIN
f2fs: fix to avoid deadlock in f2fs_read_inline_dir()
f2fs: fix to adapt small inline xattr space in __find_inline_xattr()
f2fs: fix to do sanity check with inode.i_inline_xattr_size
f2fs: give some messages for inline_xattr_size
f2fs: don't trigger read IO for beyond EOF page
f2fs: fix to add refcount once page is tagged PG_private
f2fs: remove wrong comment in f2fs_invalidate_page()
f2fs: fix to use kvfree instead of kzfree
f2fs: print more parameters in trace_f2fs_map_blocks
f2fs: trace f2fs_ioc_shutdown
f2fs: fix to avoid deadlock of atomic file operations
f2fs: fix to dirty inode for i_mode recovery
f2fs: give random value to i_generation
f2fs: no need to take page lock in readdir
f2fs: fix to update iostat correctly in IPU path
f2fs: fix encrypted page memory leak
f2fs: make fault injection covering __submit_flush_wait()
f2fs: fix to retry fill_super only if recovery failed
f2fs: silence VM_WARN_ON_ONCE in mempool_alloc
...
users to more easily find the jbd2 journal thread for a particular
ext4 file system.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlx8utQACgkQ8vlZVpUN
gaOMOQf+Olp6hTbCuPJNill7npEejkPu9VhNvLPp3dLPBfsyqG9IOZmUaKKtr3LS
ZYYzMMoIlbHDsWM70O92zDS3s1ThKRFoDdcw4YKXkn1Awlqc4LRZ/NnzyIIdA3mK
rhOvcr6ttWk2B2S67nGceTH08SX5zACMtMiQijP58+GCp4Xe+PdqPRRjYYJSOZMv
xCS43LoWY0tkeBTQuk9WYTi6G/E1X/aiq06pYiQzP69PotN6/cFSdNgP1r+7dYiS
V4IXPqEqFt8NvUZb1bJchT3+2zM3Xi/+n//7yLkpY7OhX6p1p24oB7abMstp3ssU
BlF8KP4elQcI892QX2Hf+0r4tBu+0w==
=2yLu
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A large number of bug fixes and cleanups.
One new feature to allow users to more easily find the jbd2 journal
thread for a particular ext4 file system"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
jbd2: jbd2_get_transaction does not need to return a value
jbd2: fix invalid descriptor block checksum
ext4: fix bigalloc cluster freeing when hole punching under load
ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task
ext4: Change debugging support help prefix from EXT4 to Ext4
ext4: fix compile error when using BUFFER_TRACE
jbd2: fix compile warning when using JBUFFER_TRACE
ext4: fix some error pointer dereferences
ext4: annotate more implicit fall throughs
ext4: annotate implicit fall throughs
ext4: don't update s_rev_level if not required
jbd2: fold jbd2_superblock_csum_{verify,set} into their callers
jbd2: fix race when writing superblock
ext4: fix crash during online resizing
ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT
ext4: add mask of ext4 flags to swap
ext4: update quota information while swapping boot loader inode
ext4: cleanup pagecache before swap i_data
ext4: fix check of inode in swap_inode_boot_loader
ext4: unlock unused_pages timely when doing writeback
...
1. SPDX identifier cleanup for platform/chrome
2. Cleanup series between mfd and chrome/platform, moving
cros-ec attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome.
3. Wilco EC driver
4. Maintainership change to new group repository.
-----BEGIN PGP SIGNATURE-----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=2nC0
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
- SPDX identifier cleanup for platform/chrome
- Cleanup series between mfd and chrome/platform, moving cros-ec
attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome
- Wilco EC driver
- Maintainership change to new group repository
* tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: fix wilco-ec dependencies
platform/chrome: wilco_ec: Add RTC driver
platform/chrome: wilco_ec: Add support for raw commands in debugfs
platform/chrome: Add new driver for Wilco EC
platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec
MAINTAINERS: chrome-platform: change the git tree to a chrome-platform group git tree
platform/chrome: cros_ec_sysfs: remove pr_fmt() define
platform/chrome: cros_ec_lightbar: remove pr_fmt() define
platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier
platform/chrome: cros_ec_spi: switch to SPDX identifier
platform/chrome: cros_ec_proto: switch to SPDX identifier
platform/chrome: cros_ec_lpc: switch to SPDX identifier
platform/chrome: cros_ec_i2c: switch to SPDX identifier
platform/chrome: cros_ec_vbc: switch to SPDX identifier
platform/chrome: cros_ec_sysfs: switch to SPDX identifier
platform/chrome: cros_ec_lightbar: switch to SPDX identifier
platform/chrome: cros_ec_debugfs: switch to SPDX identifier
platform/chrome: cromeos_pstore: switch to SPDX identifier
Pull livepatching updates from Jiri Kosina:
- support for something we call 'atomic replace', and allows for much
better handling of cumulative patches (which is something very useful
for distros), from Jason Baron with help of Petr Mladek and Joe
Lawrence
- improvement of handling of tasks blocking finalization, from Miroslav
Benes
- update of MAINTAINERS file to reflect move towards group
maintainership
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
livepatch/selftests: use "$@" to preserve argument list
livepatch: Module coming and going callbacks can proceed with all listed patches
livepatch: Proper error handling in the shadow variables selftest
livepatch: return -ENOMEM on ptr_id() allocation failure
livepatch: Introduce klp_for_each_patch macro
livepatch: core: Return EOPNOTSUPP instead of ENOSYS
selftests/livepatch: add DYNAMIC_DEBUG config dependency
livepatch: samples: non static warnings fix
livepatch: update MAINTAINERS
livepatch: Remove signal sysfs attribute
livepatch: Send a fake signal periodically
selftests/livepatch: introduce tests
livepatch: Remove ordering (stacking) of the livepatches
livepatch: Atomic replace and cumulative patches documentation
livepatch: Remove Nop structures when unused
livepatch: Add atomic replace
livepatch: Use lists to manage patches, objects and functions
livepatch: Simplify API by removing registration step
livepatch: Don't block the removal of patches loaded after a forced transition
livepatch: Consolidate klp_free functions
...
Here is the big USB/PHY driver pull request for 5.1-rc1.
The usual set of gadget driver updates, phy driver updates (you will
have a merge issue with Kconfig and Makefile), xhci updates, and typec
additions. Also included in here are a lot of small cleanups and fixes
and driver updates where needed.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+hsw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynfNwCgqKKg+MxJ9pFjrwfWYOrbk+BBe2UAn2Elp4ia
8FTdneQfN2J8Hhc6KGXE
=Kx9I
-----END PGP SIGNATURE-----
Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB/PHY driver pull request for 5.1-rc1.
The usual set of gadget driver updates, phy driver updates, xhci
updates, and typec additions. Also included in here are a lot of small
cleanups and fixes and driver updates where needed.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
wusb: Remove unnecessary static function ckhdid_printf
usb: core: make default autosuspend delay configurable
usb: core: Fix typo in description of "authorized_default"
usb: chipidea: Refactor USB PHY selection and keep a single PHY
usb: chipidea: Grab the (legacy) USB PHY by phandle first
usb: chipidea: imx: set power polarity
dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
usb: chipidea: imx: remove unused header files
usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
usb: core: add option of only authorizing internal devices
usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
usb: xhci: fix build warning - missing prototype
usb: xhci: dbc: Fixing typo error.
usb: xhci: remove unused member 'parent' in xhci_regset struct
xhci: tegra: Prevent error pointer dereference
USB: serial: option: add Telit ME910 ECM composition
usb: core: Replace hardcoded check with inline function from usb.h
usb: core: skip interfaces disabled in devicetree
usb: typec: mux: remove redundant check on variable match
...
Here is the big staging/iio driver pull request for 5.1-rc1.
Lots of good IIO driver updates and cleanups in here as always.
Combined with the removal of the xgifb driver, we have a net "loss" of
over 9000 lines in the pull request, always a nice thing.
As the outreachy application process is currently happening, there are
loads of tiny checkpatch cleanup fixes all over the staging tree, which
accounts for the majority of the fixups.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+gLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymBiQCeJpoBhG+W3r+kP8w65ZY8qU+/liIAn0Tkl4/k
IX1dQzCsEpO1jA8AHj6n
=7wCH
-----END PGP SIGNATURE-----
Merge tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here is the big staging/iio driver pull request for 5.1-rc1.
Lots of good IIO driver updates and cleanups in here as always.
Combined with the removal of the xgifb driver, we have a net "loss" of
over 9000 lines in the pull request, always a nice thing.
As the outreachy application process is currently happening, there are
loads of tiny checkpatch cleanup fixes all over the staging tree,
which accounts for the majority of the fixups"
* tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
staging: mt7621-dma: remove license boilerplate text
staging: mt7621-dma: add SPDX GPL-2.0+ license identifier
Staging: ks7010: Replace typecast to int
Staging: vt6655: Align a static function declaration
staging: speakup: fix line over 80 characters.
staging: mt7621-eth: Remove license boilerplate text
staging: mt7621-eth: Add SPDX license identifier
staging: ks7010: removed custom Michael MIC implementation.
staging: rtl8192e: Fix space and suspect issue
Staging: vt6655: Modify comment style of SPDX License Identifier
Staging: vt6655: Modify comment style for SPDX-License-Identifier
Staging: vt6655: Align a function declaration
Staging: vt6655: Alignment of function declaration
staging: rtl8712: Fix indentation issue
staging: wilc1000: fix incorrent type in initializer
staging: rtl8188eu: remove unused P2P_PRIVATE_IOCTL_SET_LEN
staging: rtl8188eu: remove unused enum P2P_PROTO_WK_ID
staging: rtl8723bs: Remove duplicated include from drv_types.h
Staging: vt6655: Alignment should match open parenthesis
staging: erofs: fix mis-acted TAIL merging behavior
...
Here is the big char/misc driver patch pull request for 5.1-rc1.
The largest thing by far is the new habanalabs driver for their AI
accelerator chip. For now it is in the drivers/misc directory but will
probably move to a new directory soon along with other drivers of this
type.
Other than that, just the usual set of individual driver updates and
fixes. There's an "odd" merge in here from the DRM tree that they asked
me to do as the MEI driver is starting to interact with the i915 driver,
and it needed some coordination. All of those patches have been
properly acked by the relevant subsystem maintainers.
All of these have been in linux-next with no reported issues, most for
quite some time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ
9e3l7H76oe33o96Qjhor
=8A2k
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver patch pull request for 5.1-rc1.
The largest thing by far is the new habanalabs driver for their AI
accelerator chip. For now it is in the drivers/misc directory but will
probably move to a new directory soon along with other drivers of this
type.
Other than that, just the usual set of individual driver updates and
fixes. There's an "odd" merge in here from the DRM tree that they
asked me to do as the MEI driver is starting to interact with the i915
driver, and it needed some coordination. All of those patches have
been properly acked by the relevant subsystem maintainers.
All of these have been in linux-next with no reported issues, most for
quite some time"
* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
habanalabs: adjust Kconfig to fix build errors
habanalabs: use %px instead of %p in error print
habanalabs: use do_div for 64-bit divisions
intel_th: gth: Fix an off-by-one in output unassigning
habanalabs: fix little-endian<->cpu conversion warnings
habanalabs: use NULL to initialize array of pointers
habanalabs: fix little-endian<->cpu conversion warnings
habanalabs: soft-reset device if context-switch fails
habanalabs: print pointer using %p
habanalabs: fix memory leak with CBs with unaligned size
habanalabs: return correct error code on MMU mapping failure
habanalabs: add comments in uapi/misc/habanalabs.h
habanalabs: extend QMAN0 job timeout
habanalabs: set DMA0 completion to SOB 1007
habanalabs: fix validation of WREG32 to DMA completion
habanalabs: fix mmu cache registers init
habanalabs: disable CPU access on timeouts
habanalabs: add MMU DRAM default page mapping
habanalabs: Dissociate RAZWI info from event types
misc/habanalabs: adjust Kconfig to fix build errors
...
Move L!TF to a separate directory so the MDS stuff can be added at the
side. Otherwise the all hardware vulnerabilites have their own top level
entry. Should have done that right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jon Masters <jcm@redhat.com>
Add the sysfs reporting file for MDS. It exposes the vulnerability and
mitigation state similar to the existing files for the other speculative
hardware vulnerabilities.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jon Masters <jcm@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>