io-wq defaults to per-node masks for IO workers. This works fine by
default, but isn't particularly handy for workloads that prefer more
specific affinities, for either performance or isolation reasons.
This adds IORING_REGISTER_IOWQ_AFF that allows the user to pass in a CPU
mask that is then applied to IO thread workers, and an
IORING_UNREGISTER_IOWQ_AFF that simply resets the masks back to the
default of per-node.
Note that no care is given to existing IO threads, they will need to go
through a reschedule before the affinity is correct if they are already
running or sleeping.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for allowing user specific CPU masks for IO thread
creation, switch to using a mask embedded in the per-node wqe
structure.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mm related header files are not needed for io-wq module.
remove them for a small clean-up.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable ret is being initialized with a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210615143424.60449-1-colin.king@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BUG: KASAN: use-after-free in __wake_up_common+0x637/0x650
Read of size 8 at addr ffff8880304250d8 by task iou-wrk-28796/28802
Call Trace:
__dump_stack [inline]
dump_stack+0x141/0x1d7
print_address_description.constprop.0.cold+0x5b/0x2c6
__kasan_report [inline]
kasan_report.cold+0x7c/0xd8
__wake_up_common+0x637/0x650
__wake_up_common_lock+0xd0/0x130
io_worker_handle_work+0x9dd/0x1790
io_wqe_worker+0xb2a/0xd40
ret_from_fork+0x1f/0x30
Allocated by task 28798:
kzalloc_node [inline]
io_wq_create+0x3c4/0xdd0
io_init_wq_offload [inline]
io_uring_alloc_task_context+0x1bf/0x6b0
__io_uring_add_task_file+0x29a/0x3c0
io_uring_add_task_file [inline]
io_uring_install_fd [inline]
io_uring_create [inline]
io_uring_setup+0x209a/0x2bd0
do_syscall_64+0x3a/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 28798:
kfree+0x106/0x2c0
io_wq_destroy+0x182/0x380
io_wq_put [inline]
io_wq_put_and_exit+0x7a/0xa0
io_uring_clean_tctx [inline]
__io_uring_cancel+0x428/0x530
io_uring_files_cancel
do_exit+0x299/0x2a60
do_group_exit+0x125/0x310
get_signal+0x47f/0x2150
arch_do_signal_or_restart+0x2a8/0x1eb0
handle_signal_work[inline]
exit_to_user_mode_loop [inline]
exit_to_user_mode_prepare+0x171/0x280
__syscall_exit_to_user_mode_work [inline]
syscall_exit_to_user_mode+0x19/0x60
do_syscall_64+0x47/0xb0
entry_SYSCALL_64_after_hwframe
There are the following scenarios, hash waitqueue is shared by
io-wq1 and io-wq2. (note: wqe is worker)
io-wq1:worker2 | locks bit1
io-wq2:worker1 | waits bit1
io-wq1:worker3 | waits bit1
io-wq1:worker2 | completes all wqe bit1 work items
io-wq1:worker2 | drop bit1, exit
io-wq2:worker1 | locks bit1
io-wq1:worker3 | can not locks bit1, waits bit1 and exit
io-wq1 | exit and free io-wq1
io-wq2:worker1 | drops bit1
io-wq1:worker3 | be waked up, even though wqe is freed
After all iou-wrk belonging to io-wq1 have exited, remove wqe
form hash waitqueue, it is guaranteed that there will be no more
wqe belonging to io-wq1 in the hash waitqueue.
Reported-by: syzbot+6cb11ade52aa17095297@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Link: https://lore.kernel.org/r/20210526050826.30500-1-qiang.zhang@windriver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is an old problem with io-wq cancellation where requests should be
killed and are in io-wq but are not discoverable, e.g. in @next_hashed
or @linked vars of io_worker_handle_work(). It adds some unreliability
to individual request canellation, but also may potentially get
__io_uring_cancel() stuck. For instance:
1) An __io_uring_cancel()'s cancellation round have not found any
request but there are some as desribed.
2) __io_uring_cancel() goes to sleep
3) Then workers wake up and try to execute those hidden requests
that happen to be unbound.
As we already cancel all requests of io-wq there, set IO_WQ_BIT_EXIT
in advance, so preventing 3) from executing unbound requests. The
workers will initially break looping because of getting a signal as they
are threads of the dying/exec()'ing user task.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/abfcf8c54cb9e8f7bfbad7e9a0cc5433cc70bdc2.1621781238.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the need for this, but overlooked that we no
longer use it at all. Get rid of it.
Fixes: 685fe7feed ("io-wq: eliminate the need for a manager thread")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do not include private headers and do not frob in internals.
On top of that, while the previous code restores the affinity, it
doesn't ensure the task actually moves there if it was running,
leading to the fun situation that it can be observed running outside
of its allowed mask for potentially significant time.
Use the proper API instead.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/YG7QkiUzlEbW85TU@hirez.programming.kicks-ass.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With using task_work_cancel(), we're potentially canceling task_work
that isn't related to this specific io_wq. Use the newly added
task_work_cancel_match() to ensure that we only remove and cancel work
items that are specific to this io_wq.
Fixes: 685fe7feed ("io-wq: eliminate the need for a manager thread")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq relies on a manager thread to create/fork new workers, as needed.
But there's really no strong need for it anymore. We have the following
cases that fork a new worker:
1) Work queue. This is done from the task itself always, and it's trivial
to create a worker off that path, if needed.
2) All workers have gone to sleep, and we have more work. This is called
off the sched out path. For this case, use a task_work items to queue
a fork-worker operation.
3) Hashed work completion. Don't think we need to do anything off this
case. If need be, it could just use approach 2 as well.
Part of this change is incrementing the running worker count before the
fork, to avoid cases where we observe we need a worker and then queue
creation of one. Then new work comes in, we fork a new one. That last
queue operation should have waited for the previous worker to come up,
it's quite possible we don't even need it. Hence move the worker running
from before we fork it off to more efficiently handle that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract a helper for io_work_get_acct() and io_wqe_get_acct() to avoid
duplication.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WARNING: CPU: 5 PID: 227 at fs/io_uring.c:8578 io_ring_exit_work+0xe6/0x470
RIP: 0010:io_ring_exit_work+0xe6/0x470
Call Trace:
process_one_work+0x206/0x400
worker_thread+0x4a/0x3d0
kthread+0x129/0x170
ret_from_fork+0x22/0x30
INFO: task lfs-openat:2359 blocked for more than 245 seconds.
task:lfs-openat state:D stack: 0 pid: 2359 ppid: 1 flags:0x00000004
Call Trace:
...
wait_for_completion+0x8b/0xf0
io_wq_destroy_manager+0x24/0x60
io_wq_put_and_exit+0x18/0x30
io_uring_clean_tctx+0x76/0xa0
__io_uring_files_cancel+0x1b9/0x2e0
do_exit+0xc0/0xb40
...
Even after io-wq destroy has been issued io-wq worker threads will
continue executing all left work items as usual, and may hang waiting
for I/O that won't ever complete (aka unbounded).
[<0>] pipe_read+0x306/0x450
[<0>] io_iter_do_read+0x1e/0x40
[<0>] io_read+0xd5/0x330
[<0>] io_issue_sqe+0xd21/0x18a0
[<0>] io_wq_submit_work+0x6c/0x140
[<0>] io_worker_handle_work+0x17d/0x400
[<0>] io_wqe_worker+0x2c0/0x330
[<0>] ret_from_fork+0x22/0x30
Cancel all unbounded I/O instead of executing them. This changes the
user visible behaviour, but that's inevitable as io-wq is not per task.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cd4b543154154cba055cf86f351441c2174d7f71.1617842918.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
task_pid may be large enough to not fit into the left space of
TASK_COMM_LEN-sized buffers and overflow in sprintf. We not so care
about uniqueness, so replace it with safer snprintf().
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1702c6145d7e1c46fbc382f28334c02e1a3d3994.1617267273.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.
With that, we can support receiving signals, including special ones like
SIGSTOP.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus correctly points out that this is both unnecessary and generates
much worse code on some archs as going from current to thread_info is
actually backwards - and obviously just wasteful, since the thread_info
is what we care about.
Since io_uring only operates on current for these operations, just use
test_thread_flag() instead. For io-wq, we can further simplify and use
tracehook_notify_signal() to handle the TIF_NOTIFY_SIGNAL work and clear
the flag. The latter isn't an actual bug right now, but it may very well
be in the future if we place other work items under TIF_NOTIFY_SIGNAL.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/CAHk-=wgYhNck33YHKZ14mFB5MzTTk8gqXHcfj=RWTAXKwgQJgg@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark the current task as running if we need to run task_work from the
io-wq threads as part of work handling. If that is the case, then return
as such so that the caller can appropriately loop back and reset if it
was part of a going-to-sleep flush.
Fixes: 3bfe610669 ("io-wq: fork worker threads from original task")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the freezer using the proper signaling to notify us of when it's
time to freeze a thread, we can re-enable normal freezer usage for the
IO threads. Ensure that SQPOLL, io-wq, and the io-wq manager call
try_to_freeze() appropriately, and remove the default setting of
PF_NOFREEZE from create_io_thread().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io-wq threads were already marked as no-freeze, but the manager was
not. On resume, we perpetually have signal_pending() being true, and
hence the manager will loop and spin 100% of the time.
Just mark the tasks created by create_io_thread() as PF_NOFREEZE by
default, and remove any knowledge of it in io-wq and io_uring.
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
do_work such as io_wq_submit_work that cancel the work may leave a ref of
req as 1 if we have links. Fix it by call io_run_cancel.
Fixes: 4fb6ac3262 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20210309030410.3294078-1-yangerkun@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a simple warning making sure that nobody tries to create a new
manager while we're under IO_WQ_BIT_EXIT. That can potentially happen
due to racy work submission after final put.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ran into a use-after-free on the main io-wq struct, wq. It has a worker
ref and completion event, but the manager itself isn't holding a
reference. This can lead to a race where the manager thinks there are
no workers and exits, but a worker is being added. That leads to the
following trace:
BUG: KASAN: use-after-free in io_wqe_worker+0x4c0/0x5e0
Read of size 8 at addr ffff888108baa8a0 by task iou-wrk-3080422/3080425
CPU: 5 PID: 3080425 Comm: iou-wrk-3080422 Not tainted 5.12.0-rc1+ #110
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO 10G (MS-7C60), BIOS 1.60 05/13/2020
Call Trace:
dump_stack+0x90/0xbe
print_address_description.constprop.0+0x67/0x28d
? io_wqe_worker+0x4c0/0x5e0
kasan_report.cold+0x7b/0xd4
? io_wqe_worker+0x4c0/0x5e0
__asan_load8+0x6d/0xa0
io_wqe_worker+0x4c0/0x5e0
? io_worker_handle_work+0xc00/0xc00
? recalc_sigpending+0xe5/0x120
? io_worker_handle_work+0xc00/0xc00
? io_worker_handle_work+0xc00/0xc00
ret_from_fork+0x1f/0x30
Allocated by task 3080422:
kasan_save_stack+0x23/0x60
__kasan_kmalloc+0x80/0xa0
kmem_cache_alloc_node_trace+0xa0/0x480
io_wq_create+0x3b5/0x600
io_uring_alloc_task_context+0x13c/0x380
io_uring_add_task_file+0x109/0x140
__x64_sys_io_uring_enter+0x45f/0x660
do_syscall_64+0x32/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 3080422:
kasan_save_stack+0x23/0x60
kasan_set_track+0x20/0x40
kasan_set_free_info+0x24/0x40
__kasan_slab_free+0xe8/0x120
kfree+0xa8/0x400
io_wq_put+0x14a/0x220
io_wq_put_and_exit+0x9a/0xc0
io_uring_clean_tctx+0x101/0x140
__io_uring_files_cancel+0x36e/0x3c0
do_exit+0x169/0x1340
__x64_sys_exit+0x34/0x40
do_syscall_64+0x32/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Have the manager itself hold a reference, and now both drop points drop
and complete if we hit zero, and the manager can unconditionally do a
wait_for_completion() instead of having a race between reading the ref
count and waiting if it was non-zero.
Fixes: fb3a1f6c74 ("io-wq: have manager wait for all workers to exit")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we race with shutting down the io-wq context and someone queueing
a hashed entry, then we can exit the manager with it armed. If it then
triggers after the manager has exited, we can have a use-after-free where
io_wqe_hash_wake() attempts to wake a now gone manager process.
Move the killing of the hashed write queue into the manager itself, so
that we know we've killed it before the task exits.
Fixes: e941894eae ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows us to do task creation and setup without needing to use
completions to try and synchronize with the starting thread. Get rid of
the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup
completion events - we can now do setup before the task is running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we race on shutting down the io-wq, then we should ensure that any
work that was queued after workers shutdown is canceled. Harden the
add work check a bit too, checking for IO_WQ_BIT_EXIT and cancel if
it's set.
Add a WARN_ON() for having any work before we kill the io-wq context.
Reported-by: syzbot+91b4b56ead187d35c9d3@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'err' path should include the hash put, we already grabbed a reference
once we get that far.
Fixes: e941894eae ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we move it in there, then we no longer have to care about it in io-wq.
This means we can drop the cred handling in io-wq, and we can drop the
REQ_F_WORK_INITIALIZED flag and async init functions as that was the last
user of it since we moved to the new workers. Then we can also drop
io_wq_work->creds, and just hold the personality u16 in there instead.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we put the io-wq from io_uring, we really want it to exit. Provide
a helper that does that for us. Couple that with not having the manager
hold a reference to the 'wq' and the normal SQPOLL exit will tear down
the io-wq context appropriate.
On the io-wq side, our wq context is per task, so only the task itself
is manipulating ->manager and hence it's safe to check and clear without
any extra locking. We just need to ensure that the manager task stays
around, in case it exits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We are already freeing the wq struct in both spots, so don't put it and
get it freed twice.
Reported-by: syzbot+7bf785eedca35ca05501@syzkaller.appspotmail.com
Fixes: 4fb6ac3262 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The manager waits for the workers, hence the manager is always valid if
workers are running. Now also have wq destroy wait for the manager on
exit, so we now everything is gone.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a leftover from a different use cases, it's used to wait for
the manager to startup. Rename it as such.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're in the process of shutting down the async context, then don't
create new workers if we already have at least the fixed one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of having to wait separately on workers and manager, just have
the manager wait on the workers. We use an atomic_t for the reference
here, as we need to start at 0 and allow increment from that. Since the
number of workers is naturally capped by the allowed nr of processes,
and that uses an int, there is no risk of overflow.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to have our worker count updated before continuing, to avoid
cases where we repeatedly think we need a new worker, but a fork is
already in progress.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
exec will cancel any threads, including the ones that io-wq is using. This
isn't a problem, in fact we'd prefer it to be that way since it means we
know that any async work cancels naturally without having to handle it
proactively.
But it does mean that we need to setup a new manager, as the manager and
workers are gone. Handle this at queue time, and cancel work if we fail.
Since the manager can go away without us noticing, ensure that the manager
itself holds a reference to the 'wq' as well. Rename io_wq_destroy() to
io_wq_put() to reflect that.
In the future we can now simplify exec cancelation handling, for now just
leave it the same.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before the io-wq thread change, we maintained a hash work map and lock
per-node per-ring. That wasn't ideal, as we really wanted it to be per
ring. But now that we have per-task workers, the hash map ends up being
just per-task. That'll work just fine for the normal case of having
one task use a ring, but if you share the ring between tasks, then it's
considerably worse than it was before.
Make the hash map per ctx instead, which provides full per-ctx buffered
write serialization on hashed writes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a small window between lookup dropping the reference to the
worker and calling wake_up_process() on the worker task, where the worker
itself could have exited. We ensure that the worker struct itself is
valid, but worker->task may very well be gone by the time we issue the
wakeup.
Fix the race by using a completion triggered by the reference going to
zero, and having exit wait for that completion before proceeding.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These races have always been there, they are just more apparent now that
we do early cancel of io-wq when the task exits.
Ensure that the io-wq manager sets task state correctly to not miss
wakeups for task creation. This is important if we get a wakeup after
having marked ourselves as TASK_INTERRUPTIBLE. If we do end up creating
workers, then we flip the state back to running, making the subsequent
schedule() a no-op. Also increment the wq ref count before forking the
thread, to avoid a use-after-free.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're now just using fork like we would from userspace, so there's no
need to try and impose extra restrictions or accounting on the user
side of things. That's already being done for us. That also means we
don't have to pass in the user_struct anymore, that's correctly inherited
through ->creds on fork.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We want to use this in io_uring proper as well, for the SQPOLL thread.
Rename it from fork_thread() to io_wq_fork_thread(), and make it
available through the io-wq.h header.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
