Commit graph

401 commits

Author SHA1 Message Date
Linus Torvalds
4a189982e2 Merge branch 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull aio iopriority support from Al Viro:
 "The rest of aio stuff for this cycle - Adam's aio ioprio series"

* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: aio ioprio use ioprio_check_cap ret val
  fs: aio ioprio add explicit block layer dependence
  fs: iomap dio set bio prio from kiocb prio
  fs: blkdev set bio prio from kiocb prio
  fs: Add aio iopriority support
  fs: Convert kiocb rw_hint from enum to u16
  block: add ioprio_check_cap function
2018-06-08 10:00:20 -07:00
Adam Manzanares
074111ca5f fs: blkdev set bio prio from kiocb prio
Now that kiocb has an ioprio field copy this over to the bio when it is
created from the kiocb.

Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-31 10:50:55 -04:00
Kent Overstreet
52190f8abe fs: convert block_dev.c to bioset_init()
Convert block DIO code to embedded bio sets.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30 15:33:32 -06:00
Christoph Hellwig
5afb78356c block: don't print a message when the device went away
The information about a size change in this case just creates confusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29 08:59:21 -06:00
Christoph Hellwig
4163a03984 block: unexport check_disk_size_change
Only used in block_dev.c and the partitions code, and it should remain
that way..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29 08:59:21 -06:00
Linus Torvalds
9f3a0941fb libnvdimm for 4.17
* A rework of the filesytem-dax implementation provides for detection of
   unmap operations (truncate / hole punch) colliding with in-progress
   device-DMA. A fix for these collisions remains a work-in-progress
   pending resolution of truncate latency and starvation regressions.
 
 * The of_pmem driver expands the users of libnvdimm outside of x86 and
   ACPI to describe an implementation of persistent memory on PowerPC with
   Open Firmware / Device tree.
 
 * Address Range Scrub (ARS) handling is completely rewritten to account for
   the fact that ARS may run for 100s of seconds and there is no platform
   defined way to cancel it. ARS will now no longer block namespace
   initialization.
 
 * The NVDIMM Namespace Label implementation is updated to handle label
   areas as small as 1K, down from 128K.
 
 * Miscellaneous cleanups and updates to unit test infrastructure.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJazDt5AAoJEB7SkWpmfYgCqGMQALLwdPeY87cUK7AvQ2IXj46B
 lJgeVuHPzyQDbC03AS5uUYnnU3I5lFd7i4y7ZrywNpFs4lsb/bNmbUpQE5xp+Yvc
 1MJ/JYDIP5X4misWYm3VJo85N49+VqSRgAQk52PBigwnZ7M6/u4cSptXM9//c9JL
 /NYbat6IjjY6Tx49Tec6+F3GMZjsFLcuTVkQcREoOyOqVJE4YpP0vhNjEe0vq6vr
 EsSWiqEI5VFH4PfJwKdKj/64IKB4FGKj2A5cEgjQBxW2vw7tTJnkRkdE3jDUjqtg
 xYAqGp/Dqs4+bgdYlT817YhiOVrcr5mOHj7TKWQrBPgzKCbcG5eKDmfT8t+3NEga
 9kBlgisqIcG72lwZNA7QkEHxq1Omy9yc1hUv9qz2YA0G+J1WE8l1T15k1DOFwV57
 qIrLLUypklNZLxvrzNjclempboKc4JCUlj+TdN5E5Y6pRs55UWTXaP7Xf5O7z0vf
 l/uiiHkc3MPH73YD2PSEGFJ8m8EU0N8xhrcz3M9E2sHgYCnbty1Lw3FH0/GhThVA
 ya1mMeDdb8A2P7gWCBk1Lqeig+rJKXSey4hKM6D0njOEtMQO1H4tFqGjyfDX1xlJ
 3plUR9WBVEYzN5+9xWbwGag/ezGZ+NfcVO2gmy6yXiEph796BxRAZx/18zKRJr0m
 9eGJG1H+JspcbtLF9iHn
 =acZQ
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "This cycle was was not something I ever want to repeat as there were
  several late changes that have only now just settled.

  Half of the branch up to commit d2c997c0f1 ("fs, dax: use
  page->mapping to warn...") have been in -next for several releases.
  The of_pmem driver and the address range scrub rework were late
  arrivals, and the dax work was scaled back at the last moment.

  The of_pmem driver missed a previous merge window due to an oversight.
  A sense of obligation to rectify that miss is why it is included for
  4.17. It has acks from PowerPC folks. Stephen reported a build failure
  that only occurs when merging it with your latest tree, for now I have
  fixed that up by disabling modular builds of of_pmem. A test merge
  with your tree has received a build success report from the 0day robot
  over 156 configs.

  An initial version of the ARS rework was submitted before the merge
  window. It is self contained to libnvdimm, a net code reduction, and
  passing all unit tests.

  The filesystem-dax changes are based on the wait_var_event()
  functionality from tip/sched/core. However, late review feedback
  showed that those changes regressed truncate performance to a large
  degree. The branch was rewound to drop the truncate behavior change
  and now only includes preparation patches and cleanups (with full acks
  and reviews). The finalization of this dax-dma-vs-trnucate work will
  need to wait for 4.18.

  Summary:

   - A rework of the filesytem-dax implementation provides for detection
     of unmap operations (truncate / hole punch) colliding with
     in-progress device-DMA. A fix for these collisions remains a
     work-in-progress pending resolution of truncate latency and
     starvation regressions.

   - The of_pmem driver expands the users of libnvdimm outside of x86
     and ACPI to describe an implementation of persistent memory on
     PowerPC with Open Firmware / Device tree.

   - Address Range Scrub (ARS) handling is completely rewritten to
     account for the fact that ARS may run for 100s of seconds and there
     is no platform defined way to cancel it. ARS will now no longer
     block namespace initialization.

   - The NVDIMM Namespace Label implementation is updated to handle
     label areas as small as 1K, down from 128K.

   - Miscellaneous cleanups and updates to unit test infrastructure"

* tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits)
  libnvdimm, of_pmem: workaround OF_NUMA=n build error
  nfit, address-range-scrub: add module option to skip initial ars
  nfit, address-range-scrub: rework and simplify ARS state machine
  nfit, address-range-scrub: determine one platform max_ars value
  powerpc/powernv: Create platform devs for nvdimm buses
  doc/devicetree: Persistent memory region bindings
  libnvdimm: Add device-tree based driver
  libnvdimm: Add of_node to region and bus descriptors
  libnvdimm, region: quiet region probe
  libnvdimm, namespace: use a safe lookup for dimm device name
  libnvdimm, dimm: fix dpa reservation vs uninitialized label area
  libnvdimm, testing: update the default smart ctrl_temperature
  libnvdimm, testing: Add emulation for smart injection commands
  nfit, address-range-scrub: introduce nfit_spa->ars_state
  libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device'
  nfit, address-range-scrub: fix scrub in-progress reporting
  dax, dm: allow device-mapper to operate without dax support
  dax: introduce CONFIG_DAX_DRIVER
  fs, dax: use page->mapping to warn if truncate collides with a busy page
  ext2, dax: introduce ext2_dax_aops
  ...
2018-04-10 10:25:57 -07:00
shunki-fujita
849cf55963 fs: don't flush pagecache when expanding block device
When changing the size of a block device, its all caches are freed.
It's necessary on shrinking to prevent spurious I/Os to the disappeared
region.  However, on expanding, such kind of I/Os doesn't happen.

Similar things can be considered for btrfs filesystem resize and
resize2fs, but they are designed not to drop caches when expanding.
Therefore this patch removes unnecessary cache drop.

Link: http://lkml.kernel.org/r/1521457240-153390-1-git-send-email-shunki-fujita@cybozu.co.jp
Signed-off-by: Shunki Fujita <shunki-fujita@cybozu.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05 21:36:23 -07:00
Dan Williams
15aa8a0118 block, dax: remove dead code in blkdev_writepages()
Block device inodes never have S_DAX set, so kill the check for DAX and
diversion to dax_writeback_mapping_range().

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-30 11:34:55 -07:00
Jan Kara
560e7cb2f3 blockdev: Avoid two active bdev inodes for one device
When blkdev_open() races with device removal and creation it can happen
that unhashed bdev inode gets associated with newly created gendisk
like:

CPU0					CPU1
blkdev_open()
  bdev = bd_acquire()
					del_gendisk()
					  bdev_unhash_inode(bdev);
					remove device
					create new device with the same number
  __blkdev_get()
    disk = get_gendisk()
      - gets reference to gendisk of the new device

Now another blkdev_open() will not find original 'bdev' as it got
unhashed, create a new one and associate it with the same 'disk' at
which point problems start as we have two independent page caches for
one device.

Fix the problem by verifying that the bdev inode didn't get unhashed
before we acquired gendisk reference. That way we make sure gendisk can
get associated only with visible bdev inodes.

Tested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26 09:48:42 -07:00
Jan Kara
897366537f genhd: Fix use after free in __blkdev_get()
When two blkdev_open() calls race with device removal and recreation,
__blkdev_get() can use looked up gendisk after it is freed:

CPU0				CPU1			CPU2
							del_gendisk(disk);
							  bdev_unhash_inode(inode);
blkdev_open()			blkdev_open()
  bdev = bd_acquire(inode);
    - creates and returns new inode
				  bdev = bd_acquire(inode);
				    - returns the same inode
  __blkdev_get(devt)		  __blkdev_get(devt)
    disk = get_gendisk(devt);
      - got structure of device going away
							<finish device removal>
							<new device gets
							 created under the same
							 device number>
				  disk = get_gendisk(devt);
				    - got new device structure
				  if (!bdev->bd_openers) {
				    does the first open
				  }
    if (!bdev->bd_openers)
      - false
    } else {
      put_disk_and_module(disk)
        - remember this was old device - this was last ref and disk is
          now freed
    }
    disk_unblock_events(disk); -> oops

Fix the problem by making sure we drop reference to disk in
__blkdev_get() only after we are really done with it.

Reported-by: Hou Tao <houtao1@huawei.com>
Tested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26 09:48:42 -07:00
Jan Kara
9df6c29912 genhd: Add helper put_disk_and_module()
Add a proper counterpart to get_disk_and_module() -
put_disk_and_module(). Currently it is opencoded in several places.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26 09:48:42 -07:00
Linus Torvalds
e2c5923c34 Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
 "This is the main pull request for block storage for 4.15-rc1.

  Nothing out of the ordinary in here, and no API changes or anything
  like that. Just various new features for drivers, core changes, etc.
  In particular, this pull request contains:

   - A patch series from Bart, closing the whole on blk/scsi-mq queue
     quescing.

   - A series from Christoph, building towards hidden gendisks (for
     multipath) and ability to move bio chains around.

   - NVMe
        - Support for native multipath for NVMe (Christoph).
        - Userspace notifications for AENs (Keith).
        - Command side-effects support (Keith).
        - SGL support (Chaitanya Kulkarni)
        - FC fixes and improvements (James Smart)
        - Lots of fixes and tweaks (Various)

   - bcache
        - New maintainer (Michael Lyle)
        - Writeback control improvements (Michael)
        - Various fixes (Coly, Elena, Eric, Liang, et al)

   - lightnvm updates, mostly centered around the pblk interface
     (Javier, Hans, and Rakesh).

   - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)

   - Writeback series that fix the much discussed hundreds of millions
     of sync-all units. This goes all the way, as discussed previously
     (me).

   - Fix for missing wakeup on writeback timer adjustments (Yafang
     Shao).

   - Fix laptop mode on blk-mq (me).

   - {mq,name} tupple lookup for IO schedulers, allowing us to have
     alias names. This means you can use 'deadline' on both !mq and on
     mq (where it's called mq-deadline). (me).

   - blktrace race fix, oopsing on sg load (me).

   - blk-mq optimizations (me).

   - Obscure waitqueue race fix for kyber (Omar).

   - NBD fixes (Josef).

   - Disable writeback throttling by default on bfq, like we do on cfq
     (Luca Miccio).

   - Series from Ming that enable us to treat flush requests on blk-mq
     like any other request. This is a really nice cleanup.

   - Series from Ming that improves merging on blk-mq with schedulers,
     getting us closer to flipping the switch on scsi-mq again.

   - BFQ updates (Paolo).

   - blk-mq atomic flags memory ordering fixes (Peter Z).

   - Loop cgroup support (Shaohua).

   - Lots of minor fixes from lots of different folks, both for core and
     driver code"

* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
  nvme: fix visibility of "uuid" ns attribute
  blk-mq: fixup some comment typos and lengths
  ide: ide-atapi: fix compile error with defining macro DEBUG
  blk-mq: improve tag waiting setup for non-shared tags
  brd: remove unused brd_mutex
  blk-mq: only run the hardware queue if IO is pending
  block: avoid null pointer dereference on null disk
  fs: guard_bio_eod() needs to consider partitions
  xtensa/simdisk: fix compile error
  nvme: expose subsys attribute to sysfs
  nvme: create 'slaves' and 'holders' entries for hidden controllers
  block: create 'slaves' and 'holders' entries for hidden gendisks
  nvme: also expose the namespace identification sysfs files for mpath nodes
  nvme: implement multipath access to nvme subsystems
  nvme: track shared namespaces
  nvme: introduce a nvme_ns_ids structure
  nvme: track subsystems
  block, nvme: Introduce blk_mq_req_flags_t
  block, scsi: Make SCSI quiesce and resume work reliably
  block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
  ...
2017-11-14 15:32:19 -08:00
Bart Van Assche
3a0a529971 block, scsi: Make SCSI quiesce and resume work reliably
The contexts from which a SCSI device can be quiesced or resumed are:
* Writing into /sys/class/scsi_device/*/device/state.
* SCSI parallel (SPI) domain validation.
* The SCSI device power management methods. See also scsi_bus_pm_ops.

It is essential during suspend and resume that neither the filesystem
state nor the filesystem metadata in RAM changes. This is why while
the hibernation image is being written or restored that SCSI devices
are quiesced. The SCSI core quiesces devices through scsi_device_quiesce()
and scsi_device_resume(). In the SDEV_QUIESCE state execution of
non-preempt requests is deferred. This is realized by returning
BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI
devices. Avoid that a full queue prevents power management requests
to be submitted by deferring allocation of non-preempt requests for
devices in the quiesced state. This patch has been tested by running
the following commands and by verifying that after each resume the
fio job was still running:

for ((i=0; i<10; i++)); do
  (
    cd /sys/block/md0/md &&
    while true; do
      [ "$(<sync_action)" = "idle" ] && echo check > sync_action
      sleep 1
    done
  ) &
  pids=($!)
  for d in /sys/class/block/sd*[a-z]; do
    bdev=${d#/sys/class/block/}
    hcil=$(readlink "$d/device")
    hcil=${hcil#../../../}
    echo 4 > "$d/queue/nr_requests"
    echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth"
    fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \
      --rw=randread --ioengine=libaio --numjobs=4 --iodepth=16       \
      --iodepth_batch=1 --thread --loops=$((2**31)) &
    pids+=($!)
  done
  sleep 1
  echo "$(date) Hibernating ..." >>hibernate-test-log.txt
  systemctl hibernate
  sleep 10
  kill "${pids[@]}"
  echo idle > /sys/block/md0/md/sync_action
  wait
  echo "$(date) Done." >>hibernate-test-log.txt
done

Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348).
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Christoph Hellwig
ea435e1b93 block: add a poll_fn callback to struct request_queue
That we we can also poll non blk-mq queues.  Mostly needed for
the NVMe multipath code, but could also be useful elsewhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03 10:31:48 -06:00
Matthew Wilcox
f892760aa6 fs/mpage.c: fix mpage_writepage() for pages with buffers
When using FAT on a block device which supports rw_page, we can hit
BUG_ON(!PageLocked(page)) in try_to_free_buffers().  This is because we
call clean_buffers() after unlocking the page we've written.  Introduce
a new clean_page_buffers() which cleans all buffers associated with a
page and call it from within bdev_write_page().

[akpm@linux-foundation.org: s/PAGE_SIZE/~0U/ per Linus and Matthew]
Link: http://lkml.kernel.org/r/20171006211541.GA7409@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-13 16:18:33 -07:00
Rakesh Pandit
7f66721a7d fs/block_dev: remove vfs_msg() interface
Replaced by pr_err usage in commit ef51042472 ("block, dax: move
"select DAX" from BLOCK to FS_DAX")

Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-12 12:30:24 -06:00
Linus Torvalds
e253d98f5b Merge branch 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull nowait read support from Al Viro:
 "Support IOCB_NOWAIT for buffered reads and block devices"

* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  block_dev: support RFW_NOWAIT on block device nodes
  fs: support RWF_NOWAIT for buffered reads
  fs: support IOCB_NOWAIT in generic_file_buffered_read
  fs: pass iocb to do_generic_file_read
2017-09-14 19:29:55 -07:00
Christoph Hellwig
c35fc7a5ab block_dev: support RFW_NOWAIT on block device nodes
All support is already there in the generic code, we just need to wire
it up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-04 19:04:23 -04:00
Christoph Hellwig
74d46992e0 block: replace bi_bdev with a gendisk pointer and partitions index
This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 12:49:55 -06:00
Christoph Hellwig
c2ee070fb0 block: cache the partition index in struct block_device
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 12:49:53 -06:00
Linus Torvalds
088737f44b Writeback error handling fixes (pile #2)
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXhmCAAoJEAAOaEEZVoIVpRkP/1qlYn3pq6d5Kuz84pejOmlL
 5jbkS/cOmeTxeUU4+B1xG8Lx7bAk8PfSXQOADbSJGiZd0ug95tJxplFYIGJzR/tG
 aNMHeu/BVKKhUKORGuKR9rJKtwC839L/qao+yPBo5U3mU4L73rFWX8fxFuhSJ8HR
 hvkgBu3Hx6GY59CzxJ8iJzj+B+uPSFrNweAk0+0UeWkBgTzEdiGqaXBX4cHIkq/5
 hMoCG+xnmwHKbCBsQ5js+YJT+HedZ4lvfjOqGxgElUyjJ7Bkt/IFYOp8TUiu193T
 tA4UinDjN8A7FImmIBIftrECmrAC9HIGhGZroYkMKbb8ReDR2ikE5FhKEpuAGU3a
 BXBgX2mPQuArvZWM7qeJCkxV9QJ0u/8Ykbyzo30iPrICyrzbEvIubeB/mDA034+Z
 Z0/z8C3v7826F3zP/NyaQEojUgRq30McMOIS8GMnx15HJwRsRKlzjfy9Wm4tWhl0
 t3nH1jMqAZ7068s6rfh/oCwdgGOwr5o4hW/bnlITzxbjWQUOnZIe7KBxIezZJ2rv
 OcIwd5qE8PNtpagGj5oUbnjGOTkERAgsMfvPk5tjUNt28/qUlVs2V0aeo47dlcsh
 oYr8WMOIzw98Rl7Bo70mplLrqLD6nGl0LfXOyUlT4STgLWW4ksmLVuJjWIUxcO/0
 yKWjj9wfYRQ0vSUqhsI5
 =3Z93
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull Writeback error handling updates from Jeff Layton:
 "This pile represents the bulk of the writeback error handling fixes
  that I have for this cycle. Some of the earlier patches in this pile
  may look trivial but they are prerequisites for later patches in the
  series.

  The aim of this set is to improve how we track and report writeback
  errors to userland. Most applications that care about data integrity
  will periodically call fsync/fdatasync/msync to ensure that their
  writes have made it to the backing store.

  For a very long time, we have tracked writeback errors using two flags
  in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
  writeback error occurs (via mapping_set_error) and are cleared as a
  side-effect of filemap_check_errors (as you noted yesterday). This
  model really sucks for userland.

  Only the first task to call fsync (or msync or fdatasync) will see the
  error. Any subsequent task calling fsync on a file will get back 0
  (unless another writeback error occurs in the interim). If I have
  several tasks writing to a file and calling fsync to ensure that their
  writes got stored, then I need to have them coordinate with one
  another. That's difficult enough, but in a world of containerized
  setups that coordination may even not be possible.

  But wait...it gets worse!

  The calls to filemap_check_errors can be buried pretty far down in the
  call stack, and there are internal callers of filemap_write_and_wait
  and the like that also end up clearing those errors. Many of those
  callers ignore the error return from that function or return it to
  userland at nonsensical times (e.g. truncate() or stat()). If I get
  back -EIO on a truncate, there is no reason to think that it was
  because some previous writeback failed, and a subsequent fsync() will
  (incorrectly) return 0.

  This pile aims to do three things:

   1) ensure that when a writeback error occurs that that error will be
      reported to userland on a subsequent fsync/fdatasync/msync call,
      regardless of what internal callers are doing

   2) report writeback errors on all file descriptions that were open at
      the time that the error occurred. This is a user-visible change,
      but I think most applications are written to assume this behavior
      anyway. Those that aren't are unlikely to be hurt by it.

   3) document what filesystems should do when there is a writeback
      error. Today, there is very little consistency between them, and a
      lot of cargo-cult copying. We need to make it very clear what
      filesystems should do in this situation.

  To achieve this, the set adds a new data type (errseq_t) and then
  builds new writeback error tracking infrastructure around that. Once
  all of that is in place, we change the filesystems to use the new
  infrastructure for reporting wb errors to userland.

  Note that this is just the initial foray into cleaning up this mess.
  There is a lot of work remaining here:

   1) convert the rest of the filesystems in a similar fashion. Once the
      initial set is in, then I think most other fs' will be fairly
      simple to convert. Hopefully most of those can in via individual
      filesystem trees.

   2) convert internal waiters on writeback to use errseq_t for
      detecting errors instead of relying on the AS_* flags. I have some
      draft patches for this for ext4, but they are not quite ready for
      prime time yet.

  This was a discussion topic this year at LSF/MM too. If you're
  interested in the gory details, LWN has some good articles about this:

      https://lwn.net/Articles/718734/
      https://lwn.net/Articles/724307/"

* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  btrfs: minimal conversion to errseq_t writeback error reporting on fsync
  xfs: minimal conversion to errseq_t writeback error reporting
  ext4: use errseq_t based error handling for reporting data writeback errors
  fs: convert __generic_file_fsync to use errseq_t based reporting
  block: convert to errseq_t based writeback error tracking
  dax: set errors in mapping when writeback fails
  Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
  mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
  fs: new infrastructure for writeback error handling and reporting
  lib: add errseq_t type and infrastructure for handling it
  mm: don't TestClearPageError in __filemap_fdatawait_range
  mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
  jbd2: don't clear and reset errors after waiting on writeback
  buffer: set errors in mapping at the time that the error occurs
  fs: check for writeback errors after syncing out buffers in generic_file_fsync
  buffer: use mapping_set_error instead of setting the flag
  mm: fix mapping_set_error call in me_pagecache_dirty
2017-07-07 19:38:17 -07:00
Jeff Layton
372cf243ea block: convert to errseq_t based writeback error tracking
This is a very minimal conversion to errseq_t based error tracking
for raw block device access. Just have it use the standard
file_write_and_wait_range call.

Note that there are internal callers that call sync_blockdev
and the like that are not affected by this. They'll continue
to use the AS_EIO/AS_ENOSPC flags for error reporting like
they always have for now.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-07-06 07:02:28 -04:00
Jeff Layton
5660e13d2f fs: new infrastructure for writeback error handling and reporting
Most filesystems currently use mapping_set_error and
filemap_check_errors for setting and reporting/clearing writeback errors
at the mapping level. filemap_check_errors is indirectly called from
most of the filemap_fdatawait_* functions and from
filemap_write_and_wait*. These functions are called from all sorts of
contexts to wait on writeback to finish -- e.g. mostly in fsync, but
also in truncate calls, getattr, etc.

The non-fsync callers are problematic. We should be reporting writeback
errors during fsync, but many places spread over the tree clear out
errors before they can be properly reported, or report errors at
nonsensical times.

If I get -EIO on a stat() call, there is no reason for me to assume that
it is because some previous writeback failed. The fact that it also
clears out the error such that a subsequent fsync returns 0 is a bug,
and a nasty one since that's potentially silent data corruption.

This patch adds a small bit of new infrastructure for setting and
reporting errors during address_space writeback. While the above was my
original impetus for adding this, I think it's also the case that
current fsync semantics are just problematic for userland. Most
applications that call fsync do so to ensure that the data they wrote
has hit the backing store.

In the case where there are multiple writers to the file at the same
time, this is really hard to determine. The first one to call fsync will
see any stored error, and the rest get back 0. The processes with open
fds may not be associated with one another in any way. They could even
be in different containers, so ensuring coordination between all fsync
callers is not really an option.

One way to remedy this would be to track what file descriptor was used
to dirty the file, but that's rather cumbersome and would likely be
slow. However, there is a simpler way to improve the semantics here
without incurring too much overhead.

This set adds an errseq_t to struct address_space, and a corresponding
one is added to struct file. Writeback errors are recorded in the
mapping's errseq_t, and the one in struct file is used as the "since"
value.

This changes the semantics of the Linux fsync implementation such that
applications can now use it to determine whether there were any
writeback errors since fsync(fd) was last called (or since the file was
opened in the case of fsync having never been called).

Note that those writeback errors may have occurred when writing data
that was dirtied via an entirely different fd, but that's the case now
with the current mapping_set_error/filemap_check_error infrastructure.
This will at least prevent you from getting a false report of success.

The new behavior is still consistent with the POSIX spec, and is more
reliable for application developers. This patch just adds some basic
infrastructure for doing this, and ensures that the f_wb_err "cursor"
is properly set when a file is opened. Later patches will change the
existing code to use this new infrastructure for reporting errors at
fsync time.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 07:02:25 -04:00
Linus Torvalds
c6b1e36c8f Merge branch 'for-4.13/block' of git://git.kernel.dk/linux-block
Pull core block/IO updates from Jens Axboe:
 "This is the main pull request for the block layer for 4.13. Not a huge
  round in terms of features, but there's a lot of churn related to some
  core cleanups.

  Note this depends on the UUID tree pull request, that Christoph
  already sent out.

  This pull request contains:

   - A series from Christoph, unifying the error/stats codes in the
     block layer. We now use blk_status_t everywhere, instead of using
     different schemes for different places.

   - Also from Christoph, some cleanups around request allocation and IO
     scheduler interactions in blk-mq.

   - And yet another series from Christoph, cleaning up how we handle
     and do bounce buffering in the block layer.

   - A blk-mq debugfs series from Bart, further improving on the support
     we have for exporting internal information to aid debugging IO
     hangs or stalls.

   - Also from Bart, a series that cleans up the request initialization
     differences across types of devices.

   - A series from Goldwyn Rodrigues, allowing the block layer to return
     failure if we will block and the user asked for non-blocking.

   - Patch from Hannes for supporting setting loop devices block size to
     that of the underlying device.

   - Two series of patches from Javier, fixing various issues with
     lightnvm, particular around pblk.

   - A series from me, adding support for write hints. This comes with
     NVMe support as well, so applications can help guide data placement
     on flash to improve performance, latencies, and write
     amplification.

   - A series from Ming, improving and hardening blk-mq support for
     stopping/starting and quiescing hardware queues.

   - Two pull requests for NVMe updates. Nothing major on the feature
     side, but lots of cleanups and bug fixes. From the usual crew.

   - A series from Neil Brown, greatly improving the bio rescue set
     support. Most notably, this kills the bio rescue work queues, if we
     don't really need them.

   - Lots of other little bug fixes that are all over the place"

* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
  lightnvm: pblk: set line bitmap check under debug
  lightnvm: pblk: verify that cache read is still valid
  lightnvm: pblk: add initialization check
  lightnvm: pblk: remove target using async. I/Os
  lightnvm: pblk: use vmalloc for GC data buffer
  lightnvm: pblk: use right metadata buffer for recovery
  lightnvm: pblk: schedule if data is not ready
  lightnvm: pblk: remove unused return variable
  lightnvm: pblk: fix double-free on pblk init
  lightnvm: pblk: fix bad le64 assignations
  nvme: Makefile: remove dead build rule
  blk-mq: map all HWQ also in hyperthreaded system
  nvmet-rdma: register ib_client to not deadlock in device removal
  nvme_fc: fix error recovery on link down.
  nvmet_fc: fix crashes on bad opcodes
  nvme_fc: Fix crash when nvme controller connection fails.
  nvme_fc: replace ioabort msleep loop with completion
  nvme_fc: fix double calls to nvme_cleanup_cmd()
  nvme-fabrics: verify that a controller returns the correct NQN
  nvme: simplify nvme_dev_attrs_are_visible
  ...
2017-07-03 10:34:51 -07:00
Jens Axboe
9ae3b3f52c block: provide bio_uninit() free freeing integrity/task associations
Wen reports significant memory leaks with DIF and O_DIRECT:

"With nvme devive + T10 enabled, On a system it has 256GB and started
logging /proc/meminfo & /proc/slabinfo for every minute and in an hour
it increased by 15968128 kB or ~15+GB.. Approximately 256 MB / minute
leaking.

/proc/meminfo | grep SUnreclaim...

SUnreclaim:      6752128 kB
SUnreclaim:      6874880 kB
SUnreclaim:      7238080 kB
....
SUnreclaim:     22307264 kB
SUnreclaim:     22485888 kB
SUnreclaim:     22720256 kB

When testcases with T10 enabled call into __blkdev_direct_IO_simple,
code doesn't free memory allocated by bio_integrity_alloc. The patch
fixes the issue. HTX has been run with +60 hours without failure."

Since __blkdev_direct_IO_simple() allocates the bio on the stack, it
doesn't go through the regular bio free. This means that any ancillary
data allocated with the bio through the stack is not freed. Hence, we
can leak the integrity data associated with the bio, if the device is
using DIF/DIX.

Fix this by providing a bio_uninit() and export it, so that we can use
it to free this data. Note that this is a minimal fix for this issue.
Any current user of bio's that are allocated outside of
bio_alloc_bioset() suffers from this issue, most notably some drivers.
We will fix those in a more comprehensive patch for 4.13. This also
means that the commit marked as being fixed by this isn't the real
culprit, it's just the most obvious one out there.

Fixes: 542ff7bf18 ("block: new direct I/O implementation")
Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 15:30:13 -06:00
Jens Axboe
45d06cf701 fs: add O_DIRECT and aio support for sending down write life time hints
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27 12:05:36 -06:00
NeilBrown
011067b056 blk: replace bioset_create_nobvec() with a flags arg to bioset_create()
"flags" arguments are often seen as good API design as they allow
easy extensibility.
bioset_create_nobvec() is implemented internally as a variation in
flags passed to __bioset_create().

To support future extension, make the internal structure part of the
API.
i.e. add a 'flags' argument to bioset_create() and discard
bioset_create_nobvec().

Note that the bio_split allocations in drivers/md/raid* do not need
the bvec mempool - they should have used bioset_create_nobvec().

Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 12:40:59 -06:00
Christoph Hellwig
4e4cbee93d block: switch bios to blk_status_t
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09 09:27:32 -06:00
Christoph Hellwig
36ffc6c1c0 block_dev: propagate bio_iov_iter_get_pages error in __blkdev_direct_IO
Once we move the block layer to its own status code we'll still want to
propagate the bio_iov_iter_get_pages, so restructure __blkdev_direct_IO
to take ret into account when returning the errno.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09 09:27:32 -06:00
Linus Torvalds
0fcc3ab23d Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
 "Incremental fixes and a small feature addition on top of the main
  libnvdimm 4.12 pull request:

   - Geert noticed that tinyconfig was bloated by BLOCK selecting DAX.
     The size regression is fixed by moving all dax helpers into the
     dax-core and only specifying "select DAX" for FS_DAX and
     dax-capable drivers. He also asked for clarification of the
     NR_DEV_DAX config option which, on closer look, does not need to be
     a config option at all. Mike also throws in a DEV_DAX_PMEM fixup
     for good measure.

   - Ben's attention to detail on -stable patch submissions caught a
     case where the recent fixes to arch_copy_from_iter_pmem() missed a
     condition where we strand dirty data in the cache. This is tagged
     for -stable and will also be included in the rework of the pmem api
     to a proposed {memcpy,copy_user}_flushcache() interface for 4.13.

   - Vishal adds a feature that missed the initial pull due to pending
     review feedback. It allows the kernel to clear media errors when
     initializing a BTT (atomic sector update driver) instance on a pmem
     namespace.

   - Ross noticed that the dax_device + dax_operations conversion broke
     __dax_zero_page_range(). The nvdimm unit tests fail to check this
     path, but xfstests immediately trips over it. No excuse for missing
     this before submitting the 4.12 pull request.

  These all pass the nvdimm unit tests and an xfstests spot check. The
  set has received a build success notification from the kbuild robot"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  filesystem-dax: fix broken __dax_zero_page_range() conversion
  libnvdimm, btt: ensure that initializing metadata clears poison
  libnvdimm: add an atomic vs process context flag to rw_bytes
  x86, pmem: Fix cache flushing for iovec write < 8 bytes
  device-dax: kill NR_DEV_DAX
  block, dax: move "select DAX" from BLOCK to FS_DAX
  device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
2017-05-12 15:43:10 -07:00
Dan Williams
ef51042472 block, dax: move "select DAX" from BLOCK to FS_DAX
For configurations that do not enable DAX filesystems or drivers, do not
require the DAX core to be built.

Given that the 'direct_access' method has been removed from
'block_device_operations', we can also go ahead and remove the
block-related dax helper functions from fs/block_dev.c to
drivers/dax/super.c. This keeps dax details out of the block layer and
lets the DAX core be built as a module in the FS_DAX=n case.

Filesystems need to include dax.h to call bdev_dax_supported().

Cc: linux-xfs@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-08 10:55:27 -07:00
Linus Torvalds
53ef7d0e20 libnvdimm for 4.12
* Region media error reporting: A libnvdimm region device is the parent
 to one or more namespaces. To date, media errors have been reported via
 the "badblocks" attribute attached to pmem block devices for namespaces
 in "raw" or "memory" mode. Given that namespaces can be in "device-dax"
 or "btt-sector" mode this new interface reports media errors
 generically, i.e. independent of namespace modes or state. This
 subsequently allows userspace tooling to craft "ACPI 6.1 Section
 9.20.7.6 Function Index 4 - Clear Uncorrectable Error" requests and
 submit them via the ioctl path for NVDIMM root bus devices.
 
 * Introduce 'struct dax_device' and 'struct dax_operations': Prompted by
 a request from Linus and feedback from Christoph this allows for dax
 capable drivers to publish their own custom dax operations. This fixes
 the broken assumption that all dax operations are related to a
 persistent memory device, and makes it easier for other architectures
 and platforms to add customized persistent memory support.
 
 * 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
 available for storage appliance applications to manually trigger memory
 controllers to drain write-pending buffers that would otherwise be
 flushed automatically by the platform ADR (asynchronous-DRAM-refresh)
 mechanism at a power loss event. Support for "locked" DIMMs is included
 to prevent namespaces from surfacing when the namespace label data area
 is locked. Finally, fixes for various reported deadlocks and crashes,
 also tagged for -stable.
 
 * ACPI / nfit driver updates: General updates of the nfit driver to add
 DSM command overrides, ACPI 6.1 health state flags support, DSM payload
 debug available by default, and various fixes.
 
 Acknowledgements that came after the branch was pushed:
 
 commmit 565851c972 "device-dax: fix sysfs attribute deadlock"
 Tested-by: Yi Zhang <yizhan@redhat.com>
 
 commit 23f4984483 "libnvdimm: rework region badblocks clearing"
 Tested-by: Toshi Kani <toshi.kani@hpe.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZDONJAAoJEB7SkWpmfYgC3SsP/2KrLvTUcz646ViuPOgZ2cC4
 W6wAx6cvDSt+H52kLnFEsYoFt7WAj20ggPirb/Bc5jkGlvwE0lT9Xtmso9GpVkYT
 J9ZJ9pP/4YaAD3II1gmTwaUjYi0FxoOdx3Eb92yuWkO/8ylz4b2Nu3cBpYwyziGQ
 nIfEVwDXRLE86u6x0bWuf6TlVuvsbdiAI55CDqDMVQC6xIOLbSez7b8QIHlpiKEb
 Mw+xqdQva0esoreZEOXEhWNO+qtfILx8/ceBEGTNMp4e/JjZ2FbrSNplM+9bH5k7
 ywqP8lW+mBEw0fmBBkYoVG/xyesiiBb55JLnbi8Ew+7IUxw8a3iV7wftRi62lHcK
 zAjsHe4L+MansgtZsCL8wluvIPaktAdtB4xr7l9VNLKRYRUG73jEWU0gcUNryHIL
 BkQJ52pUS1PkClyAsWbBBHl1I/CvzVPd21VW0YELmLR4OywKy1c+eKw2bcYgjrb4
 59HZSv6S6EoKaQC+2qvVNpePil7cdfg5V2ubH/ki9HoYVyoxDptEWHnvf0NNatIH
 Y7mNcOPvhOksJmnKSyHbDjtRur7WoHIlC9D7UjEFkSBWsKPjxJHoidN4SnCMRtjQ
 WKQU0seoaKj04b68Bs/Qm9NozVgnsPFIUDZeLMikLFX2Jt7YSPu+Jmi2s4re6WLh
 TmJQ3Ly9t3o3/weHSzmn
 =Ox0s
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "The bulk of this has been in multiple -next releases. There were a few
  late breaking fixes and small features that got added in the last
  couple days, but the whole set has received a build success
  notification from the kbuild robot.

  Change summary:

   - Region media error reporting: A libnvdimm region device is the
     parent to one or more namespaces. To date, media errors have been
     reported via the "badblocks" attribute attached to pmem block
     devices for namespaces in "raw" or "memory" mode. Given that
     namespaces can be in "device-dax" or "btt-sector" mode this new
     interface reports media errors generically, i.e. independent of
     namespace modes or state.

     This subsequently allows userspace tooling to craft "ACPI 6.1
     Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error"
     requests and submit them via the ioctl path for NVDIMM root bus
     devices.

   - Introduce 'struct dax_device' and 'struct dax_operations': Prompted
     by a request from Linus and feedback from Christoph this allows for
     dax capable drivers to publish their own custom dax operations.
     This fixes the broken assumption that all dax operations are
     related to a persistent memory device, and makes it easier for
     other architectures and platforms to add customized persistent
     memory support.

   - 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
     available for storage appliance applications to manually trigger
     memory controllers to drain write-pending buffers that would
     otherwise be flushed automatically by the platform ADR
     (asynchronous-DRAM-refresh) mechanism at a power loss event.
     Support for "locked" DIMMs is included to prevent namespaces from
     surfacing when the namespace label data area is locked. Finally,
     fixes for various reported deadlocks and crashes, also tagged for
     -stable.

   - ACPI / nfit driver updates: General updates of the nfit driver to
     add DSM command overrides, ACPI 6.1 health state flags support, DSM
     payload debug available by default, and various fixes.

  Acknowledgements that came after the branch was pushed:

   - commmit 565851c972 "device-dax: fix sysfs attribute deadlock":
     Tested-by: Yi Zhang <yizhan@redhat.com>

   - commit 23f4984483 "libnvdimm: rework region badblocks clearing"
     Tested-by: Toshi Kani <toshi.kani@hpe.com>"

* tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits)
  libnvdimm, pfn: fix 'npfns' vs section alignment
  libnvdimm: handle locked label storage areas
  libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED
  brd: fix uninitialized use of brd->dax_dev
  block, dax: use correct format string in bdev_dax_supported
  device-dax: fix sysfs attribute deadlock
  libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking"
  libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering
  libnvdimm: rework region badblocks clearing
  acpi, nfit: kill ACPI_NFIT_DEBUG
  libnvdimm: fix clear length of nvdimm_forget_poison()
  libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify
  libnvdimm, region: sysfs trigger for nvdimm_flush()
  libnvdimm: fix phys_addr for nvdimm_clear_poison
  x86, dax, pmem: remove indirection around memcpy_from_pmem()
  block: remove block_device_operations ->direct_access()
  block, dax: convert bdev_dax_supported() to dax_direct_access()
  filesystem-dax: convert to dax_direct_access()
  Revert "block: use DAX for partition table reads"
  ext2, ext4, xfs: retrieve dax_device for iomap operations
  ...
2017-05-05 18:49:20 -07:00
Andrey Ryabinin
a5f6a6a9c7 fs/block_dev: always invalidate cleancache in invalidate_bdev()
invalidate_bdev() calls cleancache_invalidate_inode() iff ->nrpages != 0
which doen't make any sense.

Make sure that invalidate_bdev() always calls cleancache_invalidate_inode()
regardless of mapping->nrpages value.

Fixes: c515e1fd36 ("mm/fs: add hooks to support cleancache")
Link: http://lkml.kernel.org/r/20170424164135.22350-3-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Kuznetsov <kuznet@virtuozzo.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:12 -07:00
Arnd Bergmann
67fd389735 block, dax: use correct format string in bdev_dax_supported
The new message has an incorrect format string, causing a warning in some
configurations:

fs/block_dev.c: In function 'bdev_dax_supported':
fs/block_dev.c:779:5: error: format '%d' expects argument of type 'int', but argument 2 has type 'long int' [-Werror=format=]
     "error: dax access failed (%d)", len);

This changes it to use the correct %ld instead of %d.

Fixes: 2093f2e9df ("block, dax: convert bdev_dax_supported() to dax_direct_access()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-01 13:16:29 -07:00
Dan Williams
d4b29fd78e block: remove block_device_operations ->direct_access()
Now that all the producers and consumers of dax interfaces have been
converted to using dax_operations on a dax_device, remove the block
device direct_access enabling.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-25 13:20:46 -07:00
Dan Williams
2093f2e9df block, dax: convert bdev_dax_supported() to dax_direct_access()
Kill of the final user of bdev_direct_access() and struct blk_dax_ctl.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-25 13:20:46 -07:00
Ilya Dryomov
19b7ccf865 block: get rid of blk_integrity_revalidate()
Commit 25520d55cd ("block: Inline blk_integrity in struct gendisk")
introduced blk_integrity_revalidate(), which seems to assume ownership
of the stable pages flag and unilaterally clears it if no blk_integrity
profile is registered:

    if (bi->profile)
            disk->queue->backing_dev_info->capabilities |=
                    BDI_CAP_STABLE_WRITES;
    else
            disk->queue->backing_dev_info->capabilities &=
                    ~BDI_CAP_STABLE_WRITES;

It's called from revalidate_disk() and rescan_partitions(), making it
impossible to enable stable pages for drivers that support partitions
and don't use blk_integrity: while the call in revalidate_disk() can be
trivially worked around (see zram, which doesn't support partitions and
hence gets away with zram_revalidate_disk()), rescan_partitions() can
be triggered from userspace at any time.  This breaks rbd, where the
ceph messenger is responsible for generating/verifying CRCs.

Since blk_integrity_{un,}register() "must" be used for (un)registering
the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES
setting there.  This way drivers that call blk_integrity_register() and
use integrity infrastructure won't interfere with drivers that don't
but still want stable pages.

Fixes: 25520d55cd ("block: Inline blk_integrity in struct gendisk")
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 4.4+, needs backporting
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-21 14:17:27 -06:00
Dan Williams
b0686260fe dax: introduce dax_direct_access()
Replace bdev_direct_access() with dax_direct_access() that uses
dax_device and dax_operations instead of a block_device and
block_device_operations for dax. Once all consumers of the old api have
been converted bdev_direct_access() will be deleted.

Given that block device partitioning decisions can cause dax page
alignment constraints to be violated this also introduces the
bdev_dax_pgoff() helper. It handles calculating a logical pgoff relative
to the dax_device and also checks for page alignment.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-20 11:57:52 -07:00
Dan Williams
d8f07aee3f block: kill bdev_dax_capable()
This is leftover dead code that has since been replaced by
bdev_dax_supported().

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-20 11:57:52 -07:00
Christoph Hellwig
34045129b1 block_dev: use blkdev_issue_zerout for hole punches
This gets us support for non-discard efficient write of zeroes (e.g. NVMe)
and prepares for removing the discard_zeroes_data flag.

Also remove a pointless discard support check, which is done in
blkdev_issue_discard already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Christoph Hellwig
ee472d835c block: add a flags argument to (__)blkdev_issue_zeroout
Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with
similar semantics, but without referring to diѕcard.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Jan Kara
f759741d9d block: Fix oops in locked_inode_to_wb_and_lock_list()
When block device is closed, we call inode_detach_wb() in __blkdev_put()
which sets inode->i_wb to NULL. That is contrary to expectations that
inode->i_wb stays valid once set during the whole inode's lifetime and
leads to oops in wb_get() in locked_inode_to_wb_and_lock_list() because
inode_to_wb() returned NULL.

The reason why we called inode_detach_wb() is not valid anymore though.
BDI is guaranteed to stay along until we call bdi_put() from
bdev_evict_inode() so we can postpone calling inode_detach_wb() to that
moment.

Also add a warning to catch if someone uses inode_detach_wb() in a
dangerous way.

Reported-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22 20:11:33 -06:00
Jan Kara
03e2627988 block: Fix bdi assignment to bdev inode when racing with disk delete
When disk->fops->open() in __blkdev_get() returns -ERESTARTSYS, we
restart the process of opening the block device. However we forget to
switch bdev->bd_bdi back to noop_backing_dev_info and as a result bdev
inode will be pointing to a stale bdi. Fix the problem by setting
bdev->bd_bdi later when __blkdev_get() is already guaranteed to succeed.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22 20:11:22 -06:00
Jan Kara
a5a79d0001 block: Initialize bd_bdi on inode initialization
So far we initialized bd_bdi only in bdget(). That is fine for normal
bdev inodes however for the special case of the root inode of
blockdev_superblock that function is never called and thus bd_bdi is
left uninitialized. As a result bdev_evict_inode() may oops doing
bdi_put(root->bd_bdi) on that inode as can be seen when doing:

mount -t bdev none /mnt

Fix the problem by initializing bd_bdi when first allocating the inode
and then reinitializing bd_bdi in bdev_evict_inode().

Thanks to syzkaller team for finding the problem.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: b1d2dc5659 ("block: Make blk_get_backing_dev_info() safe without open bdev")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02 08:56:59 -07:00
Fabian Frederick
93407472a2 fs: add i_blocksize()
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.

This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'

Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.

[geliangtang@gmail.com: truncate: use i_blocksize()]
  Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Jan Kara
cccd9fb9ec block: Revalidate i_bdev reference in bd_aquire()
When a device gets removed, block device inode unhashed so that it is not
used anymore (bdget() will not find it anymore). Later when a new device
gets created with the same device number, we create new block device
inode. However there may be file system device inodes whose i_bdev still
points to the original block device inode and thus we get two active
block device inodes for the same device. They will share the same
gendisk so the only visible differences will be that page caches will
not be coherent and BDIs will be different (the old block device inode
still points to unregistered BDI).

Fix the problem by checking in bd_acquire() whether i_bdev still points
to active block device inode and re-lookup the block device if not. That
way any open of a block device happening after the old device has been
removed will get correct block device inode.

Tested-by: Lekshmi Pillai <lekshmicpillai@in.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-21 12:51:54 -07:00
Jens Axboe
818551e2b2 Merge branch 'for-4.11/next' into for-4.11/linus-merge
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 14:08:19 -07:00
Jan Kara
b1d2dc5659 block: Make blk_get_backing_dev_info() safe without open bdev
Currenly blk_get_backing_dev_info() is not safe to be called when the
block device is not open as bdev->bd_disk is NULL in that case. However
inode_to_bdi() uses this function and may be call called from flusher
worker or other writeback related functions without bdev being open
which leads to crashes such as:

[113031.075540] Unable to handle kernel paging request for data at address 0x00000000
[113031.075614] Faulting instruction address: 0xc0000000003692e0
0:mon> t
[c0000000fb65f900] c00000000036cb6c writeback_sb_inodes+0x30c/0x590
[c0000000fb65fa10] c00000000036ced4 __writeback_inodes_wb+0xe4/0x150
[c0000000fb65fa70] c00000000036d33c wb_writeback+0x30c/0x450
[c0000000fb65fb40] c00000000036e198 wb_workfn+0x268/0x580
[c0000000fb65fc50] c0000000000f3470 process_one_work+0x1e0/0x590
[c0000000fb65fce0] c0000000000f38c8 worker_thread+0xa8/0x660
[c0000000fb65fd80] c0000000000fc4b0 kthread+0x110/0x130
[c0000000fb65fe30] c0000000000098f0 ret_from_kernel_thread+0x5c/0x6c

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 08:20:53 -07:00
Jan Kara
f44f1ab5a2 block: Unhash block device inodes on gendisk destruction
Currently, block device inodes stay around after corresponding gendisk
hash died until memory reclaim finds them and frees them. Since we will
make block device inode pin the bdi, we want to free the block device
inode as soon as the device goes away so that bdi does not stay around
unnecessarily. Furthermore we need to avoid issues when new device with
the same major,minor pair gets created since reusing the bdi structure
would be rather difficult in this case.

Unhashing block device inode on gendisk destruction nicely deals with
these problems. Once last block device inode reference is dropped (which
may be directly in del_gendisk()), the inode gets evicted. Furthermore if
the major,minor pair gets reallocated, we are guaranteed to get new
block device inode even if old block device inode is not yet evicted and
thus we avoid issues with possible reuse of bdi.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 08:18:41 -07:00
Christoph Hellwig
690e5325b8 block: fix use after free in __blkdev_direct_IO
We can't dereference the dio structure after submitting the last bio for
this request, as I/O completion might have happened before the code is
run. Introduce a local is_sync variable instead.

Fixes: 542ff7bf ("block: new direct I/O implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Matias Bjørling <m@bjorling.me>
Tested-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-24 07:55:53 -07:00