Let's try this again... Here are some USB fixes for 5.9-rc3.
This differs from the previous pull request for this release in that:
- the usb gadget patch now does not break some systems, and
actually does what it was intended to do. Many thanks to
Marek Szyprowski for quickly noticing and testing the patch
from Andy Shevchenko to resolve this issue.
- some more new USB quirks have been added to get some new
devices to work properly based on user reports.
Other than that, the original pull request patches are all here, and
they contain:
- usb gadget driver fixes
- xhci driver fixes
- typec fixes
- new quirks and ids
- fixes for USB patches that went into 5.9-rc1.
All of these have been tested in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX0t32g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylFMACeLEQgeN1rmfQfLyo2NHROQEeDhnIAniLMhchZ
p9dXWJ8aNeyI5OrNjD5b
=Vd05
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Let's try this again... Here are some USB fixes for 5.9-rc3.
This differs from the previous pull request for this release in that
the usb gadget patch now does not break some systems, and actually
does what it was intended to do. Many thanks to Marek Szyprowski for
quickly noticing and testing the patch from Andy Shevchenko to resolve
this issue.
Additionally, some more new USB quirks have been added to get some new
devices to work properly based on user reports.
Other than that, the patches are all here, and they contain:
- usb gadget driver fixes
- xhci driver fixes
- typec fixes
- new quirks and ids
- fixes for USB patches that went into 5.9-rc1.
All of these have been tested in linux-next with no reported issues"
* tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
usb: storage: Add unusual_uas entry for Sony PSZ drives
USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge
usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()
USB: gadget: u_f: Unbreak offset calculation in VLAs
USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D
usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures
USB: PHY: JZ4770: Fix static checker warning.
USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()
USB: gadget: u_f: add overflow checks to VLA macros
xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed
xhci: Do warm-reset when both CAS and XDEV_RESUME are set
usb: host: xhci: fix ep context print mismatch in debugfs
usb: uas: Add quirk for PNY Pro Elite
tools: usb: move to tools buildsystem
USB: Fix device driver race
USB: Also match device drivers using the ->match vfunc
usb: host: xhci-tegra: fix tegra_xusb_get_phy()
usb: host: xhci-tegra: otg usb2/usb3 port init
usb: hcd: Fix use after free in usb_hcd_pci_remove()
usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port()
...
Inadvertently the commit b1cd1b65af ("USB: gadget: u_f: add overflow checks
to VLA macros") makes VLA macros to always return 0 due to different scope of
two variables of the same name. Obviously we need to have only one.
Fixes: b1cd1b65af ("USB: gadget: u_f: add overflow checks to VLA macros")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some values extracted by ncm_unwrap_ntb() could possibly lead to several
different out of bounds reads of memory. Specifically the values passed
to netdev_alloc_skb_ip_align() need to be checked so that memory is not
overflowed.
Resolve this by applying bounds checking to a number of different
indexes and lengths of the structure parsing logic.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
size can potentially hold an overflowed value if its assigned expression
is left unchecked, leading to a smaller than needed allocation when
vla_group_size() is used by callers to allocate memory.
To fix this, add a test for saturation before declaring variables and an
overflow check to (n) * sizeof(type).
If the expression results in overflow, vla_group_size() will return SIZE_MAX.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a memory allocation fails within a 'usb_ep_alloc_request()' call, the
already allocated memory must be released.
Fix a mix-up in the code and free the correct requests.
Fixes: c52661d60f ("usb-gadget: Initial merge of target module for UASP + BOT")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXymciA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylVVwCfU7JxgjFhAJTzC9K5efVqsrSHzxQAnijHrqUn
pHgI9M1ZRVGwmv2RNWb3
=9/8I
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
usb: common: usb-conn-gpio: Register charger
usb: mtu3: simplify mtu3_req_complete()
usb: mtu3: clear dual mode of u3port when disable device
usb: mtu3: use MTU3_EP_WEDGE flag
usb: mtu3: remove useless member @busy in mtu3_ep struct
usb: mtu3: remove repeated error log
usb: mtu3: add ->udc_set_speed()
usb: mtu3: introduce a funtion to check maximum speed
usb: mtu3: clear interrupts status when disable interrupts
usb: mtu3: reinitialize CSR registers
usb: mtu3: fix macro for maximum number of packets
usb: mtu3: remove unnecessary pointer checks
usb: xhci: Fix ASMedia ASM1142 DMA addressing
usb: xhci: define IDs for various ASMedia host controllers
usb: musb: convert to devm_platform_ioremap_resource_byname
usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
usb: dwc3: convert to devm_platform_ioremap_resource_byname
usb: cdns3: convert to devm_platform_ioremap_resource_byname
usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
...
- Prepare for tasklet API modernization (Romain Perier, Allen Pais, Kees Cook)
-----BEGIN PGP SIGNATURE-----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=hb+e
-----END PGP SIGNATURE-----
Merge tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull tasklets API update from Kees Cook:
"These are the infrastructure updates needed to support converting the
tasklet API to something more modern (and hopefully for removal
further down the road).
There is a 300-patch series waiting in the wings to get set out to
subsystem maintainers, but these changes need to be present in the
kernel first. Since this has some treewide changes, I carried this
series for -next instead of paining Thomas with it in -tip, but it's
got his Ack.
This is similar to the timer_struct modernization from a while back,
but not nearly as messy (I hope). :)
- Prepare for tasklet API modernization (Romain Perier, Allen Pais,
Kees Cook)"
* tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
tasklet: Introduce new initialization API
treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()
usb: gadget: udc: Avoid tasklet passing a global
These are mostly cosmetic changes and minor bugfixes for the SoC
specific code, across the 32-bit at91, mvebu, davinci, samsung, and
omap platforms.
The main notable changes are for the Samsung Exynos platform, which
sees a rewrite of gpio handling and a change to restore and adds
a workaround for a problem with cpuidle support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=IHpg
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"These are mostly cosmetic changes and minor bugfixes for the SoC
specific code, across the 32-bit at91, mvebu, davinci, samsung, and
omap platforms.
The main notable changes are for the Samsung Exynos platform, which
sees a rewrite of gpio handling and a change to restore and adds a
workaround for a problem with cpuidle support"
* tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()
MAINTAINERS: arm/amlogic: add designated reviewers
ARM: davinci: dm646x-evm: Simplify error handling in 'evm_sw_setup()'
ARM: davinci: Fix trivial spelling
ARM: davinci: Replace HTTP links with HTTPS ones
ARM: s3c24xx: Replace HTTP links with HTTPS ones
ARM: orion/gpio: Make use of for_each_requested_gpio()
ARM: at91: Replace HTTP links with HTTPS ones
ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()
ARM: rpc: Change blacklist to quirklist in ecode.c file
ARM: OMAP: Replace HTTP links with HTTPS ones
ARM: s3c24xx: leds: Convert to use GPIO descriptors
udc: lpc32xx: mark local function static
ARM: exynos: MCPM: Restore big.LITTLE cpuidle support
ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val
This converts all the existing DECLARE_TASKLET() (and ...DISABLED)
macros with DECLARE_TASKLET_OLD() in preparation for refactoring the
tasklet callback type. All existing DECLARE_TASKLET() users had a "0"
data argument, it has been removed here as well.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
There's no reason for the tasklet callback to set an argument since it
always uses a global. Instead, use the global directly, in preparation
for converting the tasklet subsystem to modern callback conventions.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
After the device is disconnected from the host side, the interface of
the device is reset. If the userspace operates the device again,
an error code should be returned.
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
As per UAC2 spec (ch. 4.7.2), wTotalLength of AC Interface
Header Descriptor "includes the combined length of this
descriptor header and all Clock Source, Unit and Terminal
descriptors."
Thus add its size to its wTotalLength.
Also after recent changes wTotalLength is calculated
dynamically, update static definition of uac2_ac_header_descriptor
accordingly
Fixes: 132fcb4608 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The BDC clock is optional and we may get an -EPROBE_DEFER error code
which would not be propagated correctly, fix this by using
devm_clk_get_optional().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
GISB bus error kernel panics have been observed during S2 transition
tests on the 7271t platform. The errors are a result of the BDC
interrupt handler trying to access BDC register space after the
system's suspend callbacks have completed.
Adding a suspend hook to the BDC driver that halts the controller before
S2 entry thus preventing unwanted access to the BDC register space during
this transition.
Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Version v1.0.40 of the Android host ADB software increased maximum
transfer sizes from 256K to 1M. Since the STB ADB gadget driver
requests only 16K at a time, the BDC driver ran out of buffer
descriptors (BDs) if the queuing happens faster than the incoming
16K transfers. This issue is fixed by doubling the number of BDs
that can be queued so that the entire 1M request can be queued
without running out of buffers.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
On Android systems, After temporarily putting device to S2 by
short pressing the power button on the remote, the display turns
off. Then press the power button to turn the display back up. Adb
devices would show the devices is offline. It needs a physical
disconnect of the usb cable or power cycle to bring the device
back online. The device is operational otherwise.
The problem is that during S2 resume, the ADB gadget driver could
not link back with the BDC driver because the endpoint flags were
cleared. The fix is to clear the endpoint flags for the disconnect
case only and not for S2 exit.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Multiple connects/disconnects can cause a crash on the second
disconnect. The driver had a problem where it would try to send
endpoint commands after it was disconnected which is not allowed
by the hardware. The fix is to only allow the endpoint commands
when the endpoint is connected. This will also fix issues that
showed up when using configfs to create gadgets.
Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add compatible string for some newer boards that only have this
as their match sting. Remove unused compatible string "brcm,bdc-v0.16".
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Driver does not release memory for device on error handling paths in
net2280_probe() when gadget_release() is not registered yet.
The patch fixes the bug like in other similar drivers.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
net2272_rdk1_probe() skips "i == 1" (BAR1) during allocation of
resources. The patch does this on error hanling paths as well.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Implement udc->pullup callback, so that udc_connect/disconnect work.
This is needed for composite gadget, as it assumes udc_disconnect()
actually works and calls its ->disconnect callback.
Acked-by: Cristian Birsan <cristian.birsan@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
When binding an UDC driver to the pending gadget fails in
check_pending_gadget_drivers(), the usb_add_gadget_udc_release() function
ends without waiting for the usb_gadget_state_work to finish, what in
turn might cause the whole struct usb_gadget being freed by the caller
before the usb_gadget_state_work being executed.
This can be observed on some boards with USB Mass Storage gadget
compiled-in and kernel booted without the needed module parameters:
dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1
dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024
dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
no file given for LUN0
g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22
dwc2: probe of 12480000.hsotg failed with error -22
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = (ptrval)
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 88 Comm: kworker/1:2 Not tainted 5.8.0-rc5-next-20200715-00062-gc5bb489ae825-dirty #8792
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: 0x0 (rcu_gp)
PC is at process_one_work+0x44/0x7dc
...
Process kworker/1:2 (pid: 88, stack limit = 0x(ptrval))
Stack: (0xed9f1f00 to 0xed9f2000)
...
[<c0148590>] (process_one_work) from [<c0148d6c>] (worker_thread+0x44/0x51c)
[<c0148d6c>] (worker_thread) from [<c01500c0>] (kthread+0x158/0x1a0)
[<c01500c0>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
Exception stack(0xed9f1fb0 to 0xed9f1ff8)
...
---[ end trace 5033c1326a62e5f3 ]---
note: kworker/1:2[88] exited with preempt_count 1
Fix this by flushing pending work in error path.
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge 5.8-rc6 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200710190919.31464-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sparse tool complains as follows:
drivers/usb/gadget/udc/lpc32xx_udc.c:2989:25: warning:
symbol 'lpc32xx_usbddata' was not declared. Should it be static?
This variable is not used outside of lpc32xx_udc.c, so this commit
marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200707105350.7064-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/max3420_udc.c: In function ‘max3420_handle_setup’:
drivers/usb/gadget/udc/max3420_udc.c:626:5: warning: variable ‘addr’ set but not used [-Wunused-but-set-variable]
626 | u8 addr;
| ^~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like it's never been used. Driver was mainlined in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/mv_u3d_core.c:35:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
35 | static const char driver_desc[] = DRIVER_DESC;
| ^~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Yu Xu <yuxu@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_uac1_legacy.c:30: warning: Function parameter or member 'i' not described in 'snd_interval_refine_set'
drivers/usb/gadget/function/u_uac1_legacy.c:30: warning: Function parameter or member 'val' not described in 'snd_interval_refine_set'
drivers/usb/gadget/function/u_uac1_legacy.c:93: warning: Function parameter or member 'snd' not described in 'playback_default_hw_params'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'card' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'buf' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'count' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:197: warning: Function parameter or member 'card' not described in 'gaudio_open_snd_dev'
drivers/usb/gadget/function/u_uac1_legacy.c:257: warning: Function parameter or member 'gau' not described in 'gaudio_close_snd_dev'
drivers/usb/gadget/function/u_uac1_legacy.c:286: warning: Function parameter or member 'card' not described in 'gaudio_setup'
drivers/usb/gadget/function/u_uac1_legacy.c:303: warning: Function parameter or member 'the_card' not described in 'gaudio_cleanup'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ranging from missing descriptions and formatting mishaps to over-documenting
of missing arguments, likely due to bitrot.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/pch_udc.c:239: warning: Function parameter or member 'request' not described in 'pch_udc_stp_dma_desc'
drivers/usb/gadget/udc/pch_udc.c:315: warning: Function parameter or member 'irq_work_fall' not described in 'pch_vbus_gpio_data'
drivers/usb/gadget/udc/pch_udc.c:315: warning: Function parameter or member 'irq_work_rise' not described in 'pch_vbus_gpio_data'
drivers/usb/gadget/udc/pch_udc.c:482: warning: Function parameter or member 'ep' not described in 'pch_udc_write_csr'
drivers/usb/gadget/udc/pch_udc.c:482: warning: Excess function parameter 'addr' description in 'pch_udc_write_csr'
drivers/usb/gadget/udc/pch_udc.c:498: warning: Function parameter or member 'ep' not described in 'pch_udc_read_csr'
drivers/usb/gadget/udc/pch_udc.c:498: warning: Excess function parameter 'addr' description in 'pch_udc_read_csr'
drivers/usb/gadget/udc/pch_udc.c:662: warning: Function parameter or member 'ep_in' not described in 'pch_udc_ep_set_bufsz'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Function parameter or member 'ep' not described in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Function parameter or member 'cfg' not described in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Excess function parameter 'regs' description in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:1010: warning: Function parameter or member 'ep' not described in 'pch_udc_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:1010: warning: Excess function parameter 'regs' description in 'pch_udc_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:1030: warning: Function parameter or member 'ep' not described in 'pch_udc_wait_ep_stall'
drivers/usb/gadget/udc/pch_udc.c:1030: warning: Excess function parameter 'dev' description in 'pch_udc_wait_ep_stall'
drivers/usb/gadget/udc/pch_udc.c:1341: warning: Function parameter or member 'data' not described in 'pch_vbus_gpio_irq'
drivers/usb/gadget/udc/pch_udc.c:1341: warning: Excess function parameter 'dev' description in 'pch_vbus_gpio_irq'
drivers/usb/gadget/udc/pch_udc.c:1365: warning: Function parameter or member 'vbus_gpio_port' not described in 'pch_vbus_gpio_init'
drivers/usb/gadget/udc/pch_udc.c:1510: warning: Function parameter or member 'dev' not described in 'pch_udc_free_dma_chain'
drivers/usb/gadget/udc/pch_udc.c:1510: warning: Function parameter or member 'req' not described in 'pch_udc_free_dma_chain'
drivers/usb/gadget/udc/pch_udc.c:1717: warning: Function parameter or member 'usbep' not described in 'pch_udc_pcd_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:2006: warning: Excess function parameter 'halt' description in 'pch_udc_pcd_set_wedge'
drivers/usb/gadget/udc/pch_udc.c:2756: warning: Function parameter or member 'pdev' not described in 'pch_udc_isr'
drivers/usb/gadget/udc/pch_udc.c:2756: warning: Excess function parameter 'dev' description in 'pch_udc_isr'
drivers/usb/gadget/udc/pch_udc.c:2906: warning: Function parameter or member 'dev' not described in 'init_dma_pools'
drivers/usb/gadget/udc/pch_udc.c:2906: warning: Excess function parameter 'pdev' description in 'init_dma_pools'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: LAPIS Semiconductor <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though it's never been used. Driver was introduced in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/mv_udc_core.c:56:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
56 | static const char driver_desc[] = DRIVER_DESC;
| ^~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are not used outside of this sourcefile, so make them static.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/lpc32xx_udc.c:1929:6: warning: no previous prototype for ‘udc_send_in_zlp’ [-Wmissing-prototypes]
1929 | void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
| ^~~~~~~~~~~~~~~
drivers/usb/gadget/udc/lpc32xx_udc.c:1943:6: warning: no previous prototype for ‘udc_handle_eps’ [-Wmissing-prototypes]
1943 | void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
| ^~~~~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20200706133341.476881-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'type' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'h' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'data' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'len' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'priv' not described in '__ffs_data_do_os_desc'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though it's never been used. Driver was introduced in 2010.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/legacy/nokia.c:65:19: warning: ‘product_nokia’ defined but not used [-Wunused-const-variable=]
65 | static const char product_nokia[] = NOKIA_LONG_NAME;
| ^~~~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Al Borchers <alborchers@steinerpoint.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e78355b577 ("usb: gadget: udc: atmel: Don't use DT to
configure end point") pulled out all functionality dealing with 'pp'.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/atmel_usba_udc.c: In function ‘atmel_udc_of_init’:
drivers/usb/gadget/udc/atmel_usba_udc.c:2106:22: warning: variable ‘pp’ set but not used [-Wunused-but-set-variable]
2106 | struct device_node *pp;
| ^~
Cc: Cristian Birsan <cristian.birsan@microchip.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mostly bitrotted argument descriptions/names. Also the removal
of a blank line in the middle of a kerneldoc header, which is
not allowed.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Function parameter or member 'ep' not described in 'ep_write_UDCCSR'
drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Excess function parameter 'udc' description in 'ep_write_UDCCSR'
drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Function parameter or member 'udc' not described in 'set_ep0state'
drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Excess function parameter 'dev' description in 'set_ep0state'
drivers/usb/gadget/udc/pxa27x_udc.c:506: warning: Excess function parameter 'req' description in 'inc_ep_stats_reqs'
drivers/usb/gadget/udc/pxa27x_udc.c:1476: warning: bad line:
drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Function parameter or member 'udc' not described in 'udc_enable'
drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Excess function parameter 'dev' description in 'udc_enable'
drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Function parameter or member 'g' not described in 'pxa27x_udc_start'
drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Excess function parameter 'bind' description in 'pxa27x_udc_start'
drivers/usb/gadget/udc/pxa27x_udc.c:1784: warning: Excess function parameter 'driver' description in 'stop_activity'
drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Function parameter or member 'g' not described in 'pxa27x_udc_stop'
drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Excess function parameter 'driver' description in 'pxa27x_udc_stop'
drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Function parameter or member 'pdev' not described in 'pxa_udc_probe'
drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Excess function parameter '_dev' description in 'pxa_udc_probe'
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kerneldoc expects all function arguments to be documented. If any
are missed it will complain. Downgrade one header with 3 missing
argument descriptions and one which makes no attempt.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'dev_addr' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'host_addr' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'qmult' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:1022: warning: Function parameter or member 'dev' not described in 'gether_cleanup'
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/amd5536udc_pci.c:52:19: warning: ‘mod_desc’ defined but not used [-Wunused-const-variable=]
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/legacy/printer.c:24:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An attempt was made to document the functions in 'dummy_hcd',
but a simple spelling mistake was made.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/dummy_hcd.c:1597: warning: Function parameter or member 'dum_hcd' not described in 'handle_control_request'
drivers/usb/gadget/udc/dummy_hcd.c:1597: warning: Excess function parameter 'dum' description in 'handle_control_request'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-31-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though this has been an issue since the driver's
inception back in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_serial.c:538: warning: Function parameter or member 'port' not described in 'gs_start_io'
drivers/usb/gadget/function/u_serial.c:538: warning: Excess function parameter 'dev' description in 'gs_start_io'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Al Borchers <alborchers@steinerpoint.com>
Cc: Peter Berger <pberger@brimson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-27-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly, file headers should not be in kerneldoc format. Function
args should be in the format '@.*: '. We also take the time to
add some descriptions for various argument which have been
previously left out. Finally we remove descriptions for absent
arguments.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/core.c:25: warning: Incorrect use of kernel-doc format: * struct usb_udc - describes one usb device controller
drivers/usb/gadget/udc/core.c:36: warning: cannot understand function prototype: 'struct usb_udc '
drivers/usb/gadget/udc/core.c:901: warning: Function parameter or member 'ep' not described in 'usb_gadget_giveback_request'
drivers/usb/gadget/udc/core.c:901: warning: Function parameter or member 'req' not described in 'usb_gadget_giveback_request'
drivers/usb/gadget/udc/core.c:1098: warning: Function parameter or member 'udc' not described in 'usb_gadget_udc_stop'
drivers/usb/gadget/udc/core.c:1098: warning: Excess function parameter 'gadget' description in 'usb_gadget_udc_stop'
drivers/usb/gadget/udc/core.c:1098: warning: Excess function parameter 'driver' description in 'usb_gadget_udc_stop'
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a missing spinlock protection for play_queue, because
the play_queue may be destroyed when the "playback_work"
work func and "f_audio_out_ep_complete" callback func
operate this paly_queue at the same time.
Fixes: c6994e6f06 ("USB: gadget: add USB Audio Gadget driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fixed commit moved the assignment of 'req', but did not update a
reference in the DBG() call. Use the argument as it was renamed.
Fixes: 5fb694f96e ("usb: gadget: udc: atmel: fix possible oops when unloading module")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fixed commit removed the offending behaviour from the driver, but missed
the comment and associated test. Remove them now.
Fixes: 38e58986e6 ("usb: gadget: udc: atmel: don't disable enpdoints we don't own")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
