Commit graph

36 commits

Author SHA1 Message Date
Santiago Leon
9c3121feef [SCSI] ibmvscsi: correctly reenable CRQ
The "ibmvscsi: treat busy and error conditions separately" patch
submitted by Dave Boutcher back in June incorrectly reenables the CRQ.
The broken logic causes the adapter to get disabled if the CRQ
connection happens to close temporarily.  This patch "fixes that
obviously wrong logic check" (Dave's words).

Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: David Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:13:17 -07:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Paul Mackerras
57cad8084e Merge branch 'merge' 2006-08-01 10:37:25 +10:00
Jeremy Kerr
294ef16a2e [POWERPC] scsi: Constify & voidify get_property()
Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

powerpc-specific scsi driver changes.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-31 15:55:05 +10:00
Dave C Boutcher
ae0fda0cdf [SCSI] ibmvscsi: handle inactive SCSI target during probe
Without this patch we register an interrupt with request_irq,
but then return a bad return code from the module probe.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09 11:28:58 -05:00
Dave C Boutcher
6c51fe1047 [SCSI] ibmvscsi: allocate lpevents for ibmvscsi on iseries
Allocate the correct number of lp events when running
ibmvscsi on legacy iseries

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09 11:28:38 -05:00
Dave C Boutcher
cefbda2d6c [SCSI] ibmvscsi: treat busy and error conditions separately
This patch fixes a condition where ibmvscsi treats a transport error as a
"busy" condition, so no errors were returned to the scsi mid-layer.
In a RAID environment this means that I/O hung rather than failing
over.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 09:15:41 -05:00
James Bottomley
f0cd91a68a Merge ../linux-2.6 2006-06-10 13:47:26 -05:00
FUJITA Tomonori
e5dbfa6621 [SCSI] ibmvscsi: fix leak when failing to send srp event
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-28 09:24:44 -05:00
FUJITA Tomonori
4c021dd136 [SCSI] ibmvscsi: convert kmalloc + memset to kcalloc
Convert kmalloc + memset to kcalloc in ibmvscsi

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 15:50:04 -05:00
FUJITA Tomonori
441f987ca4 [SCSI] ibmvscsi: remove drivers/scsi/ibmvscsi/srp.h
It's no longer needed after the convrsion to use the linux srp.h file.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 13:21:51 -05:00
FUJITA Tomonori
ef26567343 [SCSI] ibmvscsi: convert the ibmvscsi driver to use include/scsi/srp.h
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:17 -05:00
Dave C Boutcher
9b833e428a [SCSI] ibmvscsi: prevent scsi commands being sent in invalid state
There is a window where we can be re-enabling an adapter, but
still allow SCSI commands to be sent to the target.  This fix
sets our window (request_limit) to -1 as soon as we know the
adapter is being reenabled, and closes a very teeny tiny
window where we could set the window back to 1 before we
grab a lock.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:16 -05:00
Segher Boessenkool
706c8c93ba [PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS
Also cleans up some nearby whitespace problems.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:36:57 +11:00
Dave C Boutcher
2b541f8f77 [SCSI] ibmvscsi: handle re-enable firmware message
New versions of the Power5 firmware can send a "re-enable" message to
the virtual scsi adapter.  This fix makes us handle the message
correctly.  Without it, the driver goes catatonic and the system crashes
unpleasantly.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-26 08:10:08 -05:00
Dave C Boutcher
bb58596f68 [SCSI] ibmvscsi kexec fix
This makes ibmvscsi work correctly with the recent set of kexec
patches that went in.  This is based on work by Michael Ellerman, who
chased this initially.  He validated that it works during kexec.

Handle kexec correctly in ibmvscsi.   During kexec the adapter
will not get cleaned up correctly, so we may need to reset it
to make it sane again.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-07 09:30:01 -05:00
Kelly Daly
b420677870 merge filename and modify references to iseries/vio.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:13:57 +11:00
Kelly Daly
1ec65d76f3 merge filename and modify references to iseries/hv_types.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 13:46:07 +11:00
Kelly Daly
e45423eac2 merge filename and modify references to iseries/hv_lp_event.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 12:08:31 +11:00
Kelly Daly
15b1718948 merge filename and modify reference to iseries/hv_lp_config.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:55:28 +11:00
Stephen Rothwell
915124d811 powerpc: set the driver.owner field for all vio drivers
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 16:59:13 +10:00
Stephen Rothwell
6fdf5392ca powerpc: don't duplicate name between vio_driver and device_driver
Just set the name field directly in the device_driver structure
contained in the vio_driver struct.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 15:42:12 +10:00
Dave C Boutcher
154fb614df [SCSI] ibmvscsi compatibility fix
Linda Xie ever so gently pointed out that she had a patch
to preserve compatibility with older SLES targets, and I told
her we didn't need to push it to mainline.

This patch explicitly checks the version of the IBMVSCSI target
and ensures that large scatterlists are not sent to older
targets.

Signed-off-by: Linda Xie <lxie@us.ibm.com>
Signed-off-by: Dave Boutcher <boutcher@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-13 10:15:10 -05:00
Linus Torvalds
0481990b75 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-09-07 17:31:27 -07:00
James Bottomley
17fa53da12 Merge by hand (conflicts in sd.c) 2005-09-06 17:52:54 -05:00
James Bottomley
4dddbc26c3 [SCSI] ibmvscsi: handle large scatter/gather lists
The maximum size of a scatter-gather list that the current IBM VSCSI
Client can handle is 10.  This patch adds large scatter-gather support
to the client so that it is capable of handling up to SG_ALL(255)
number of requests in the scatter-gather list.

Signed-off-by: Linda Xie <lxie@us.ibm.com>
Acked by: Dave C Boutcher <sleddog@us.ibm.com>

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:11:54 -05:00
Stephen Rothwell
fb120da678 [PATCH] Make MODULE_DEVICE_TABLE work for vio devices
Make MODULE_DEVICE_TABLE work for vio devices.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:31:56 +10:00
Stephen Rothwell
71d276d751 [PATCH] Create vio_bus_ops
Create vio_bus_ops so that we just pass a structure to vio_bus_init
instead of three separate function pointers.

Rearrange vio.h to avoid forward references. vio.h only needs
struct device_node from prom.h so remove the include and just
declare it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:23:47 +10:00
James Bottomley
7a93aef7fb Merge HEAD from ../scsi-misc-2.6-tmp 2005-08-28 11:18:35 -05:00
Dave C Boutcher
8224bfa84d [SCSI] ibmvscsi timeout fix
This patch fixes a long term borkenness in
ibmvscsi where we were using the wrong timeout
field from the scsi command (and using the
wrong units.)  Now broken by the fact that the
scsi_cmnd timeout field is gone entirely.
This only worked before because all the SCSI
targets assumed that 0 was default.

Signed-off-by: Dave Boutcher <boutcher@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 11:14:11 -05:00
Dave C Boutcher
be042f240a [SCSI] ibmvscsi eh locking
With the removal of the spinlocking around eh calls, we need to add a
little more locking back in, otherwise we do some naked list
manipulation.

Signed-off-by: Dave Boutcher <boutcher@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 11:14:08 -05:00
Linda Xie
7cd7ae531c [SCSI] scsi/ibmvscsi/srp.h: Fix a wrong type code used for SRP_LOGIN_REJ
This patch fixes srp.h which uses 0x80 for SRP_LOGIN_REJ instead of
0xc2.

Signed-off-by: Linda Xie <lxie@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30 08:59:04 -05:00
Linda Xie
b4687ca42c [SCSI] IBM VSCSI Client: sending client info to server
Fix the problem in IBM VSCSI Client where the client doesn't send the
information which is expected by the server.

Signed-off-by: Linda Xie <lxie@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 19:25:09 -05:00
Jeff Garzik
94d0e7b805 [SCSI] allow sleeping in ->eh_device_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:03 -05:00
Jeff Garzik
8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00