Commit graph

1087405 commits

Author SHA1 Message Date
Linus Torvalds
b1f8ccdaae - Significant refactoring and fixing of how DM core does bio-based IO
accounting with focus on fixing wildly inaccurate IO stats for
   dm-crypt (and other DM targets that defer bio submission in their
   own workqueues). End result is proper IO accounting, made possible
   by targets being updated to use the new dm_submit_bio_remap()
   interface.
 
 - Add hipri bio polling support (REQ_POLLED) to bio-based DM.
 
 - Reduce dm_io and dm_target_io structs so that a single dm_io (which
   contains dm_target_io and first clone bio) weighs in at 256 bytes.
   For reference the bio struct is 128 bytes.
 
 - Various other small cleanups, fixes or improvements in DM core and
   targets.
 
 - Update MAINTAINERS with my kernel.org email address to allow
   distinction between my "upstream" and "Red" Hats.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmI7ghIACgkQxSPxCi2d
 A1q04wgAzaRu186WjfCO8MK0uyv3S52Rw1EsgYealAqoPwQJ9KkW2icvjtwRL+fJ
 1+w6qE/Da6QdwXj9lGtp1XIXJFipNJSw3PSaE/tV2cXiBemZlzJ5vR6F6dfeYKmV
 /sGas46H2l+aD4Xr7unUmcN/AYrNIFtnucClY3+DlJFPesXQQc9a/XmL9RX9MrN4
 MS9wLkh/5QSG3zReEct/4GVmNSJAjFfLkkeFHtLN82jvvDmnszRT5+aJ06WkXeOz
 OZmQfOPnJv5MnFUz9DOaRb/fTCoyxzxLnNM5Lt3jyFPk9Jf8Qz9TJ2rgskxsE83u
 UsCD/Y/QAdDcrRVB5SS6+yx4AS6uSA==
 =cinj
 -----END PGP SIGNATURE-----

Merge tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Significant refactoring and fixing of how DM core does bio-based IO
   accounting with focus on fixing wildly inaccurate IO stats for
   dm-crypt (and other DM targets that defer bio submission in their own
   workqueues). End result is proper IO accounting, made possible by
   targets being updated to use the new dm_submit_bio_remap() interface.

 - Add hipri bio polling support (REQ_POLLED) to bio-based DM.

 - Reduce dm_io and dm_target_io structs so that a single dm_io (which
   contains dm_target_io and first clone bio) weighs in at 256 bytes.
   For reference the bio struct is 128 bytes.

 - Various other small cleanups, fixes or improvements in DM core and
   targets.

 - Update MAINTAINERS with my kernel.org email address to allow
   distinction between my "upstream" and "Red" Hats.

* tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (46 commits)
  dm: consolidate spinlocks in dm_io struct
  dm: reduce size of dm_io and dm_target_io structs
  dm: switch dm_target_io booleans over to proper flags
  dm: switch dm_io booleans over to proper flags
  dm: update email address in MAINTAINERS
  dm: return void from __send_empty_flush
  dm: factor out dm_io_complete
  dm cache: use dm_submit_bio_remap
  dm: simplify dm_sumbit_bio_remap interface
  dm thin: use dm_submit_bio_remap
  dm: add WARN_ON_ONCE to dm_submit_bio_remap
  dm: support bio polling
  block: add ->poll_bio to block_device_operations
  dm mpath: use DMINFO instead of printk with KERN_INFO
  dm: stop using bdevname
  dm-zoned: remove the ->name field in struct dmz_dev
  dm: remove unnecessary local variables in __bind
  dm: requeue IO if mapping table not yet available
  dm io: remove stale comment block for dm_io()
  dm thin metadata: remove unused dm_thin_remove_block and __remove
  ...
2022-03-24 19:25:24 -07:00
Linus Torvalds
2dacc1e57b v5.18 merge window pull request
Patchces for the merge window:
 
 - Minor bug fixes in mlx5, mthca, pvrdma, rtrs, mlx4, hfi1, hns
 
 - Minor cleanups: coding style, useless includes and documentation
 
 - Reorganize how multicast processing works in rxe
 
 - Replace a red/black tree with xarray in rxe which improves performance
 
 - DSCP support and HW address handle re-use in irdma
 
 - Simplify the mailbox command handling in hns
 
 - Simplify iser now that FMR is eliminated
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmI7d8gACgkQOG33FX4g
 mxq9TRAAm/3rEBtDyVan4Dm3mzq8xeJOTdYtQ29QNWZcwvhStNTo4c29jQJITZ9X
 Xd+m8VEPWzjkkZ4+hDFM9HhWjOzqDcCCFcbF88WDO0+P1M3HYYUE6AbIcSilAaT2
 GIby3+kAnsTOAryrSzHLehYJKUYJuw5NRGsVAPY3r6hz3UECjNb/X1KTWhXaIfNy
 2OTqFx5wMQ6hZO8e4a2Wz4bBYAYm95UfK+TgfRqUwhDLCDnkDELvHMPh9pXxJecG
 xzVg7W7Nv+6GWpUrqtM6W6YpriyjUOfbrtCJmBV3T/EdpiD6lZhKpkX23aLgu2Bi
 XoMM67aZ0i1Ft2trCIF8GbLaejG6epBkeKkUMMSozKqFP5DjhNbD2f3WAlMI15iW
 CcdyPS5re1ymPp66UlycTDSkN19wD8LfgQPLJCNM3EV8g8qs9LaKzEPWunBoZmw1
 a+QX2zK8J07S21F8iq2sf/Qe1EDdmgOEOf7pmB/A5/PKqgXZPG7lYNYuhIKyFsdL
 mO+BqWWp0a953JJjsiutxyUCyUd8jtwwxRa0B66oqSQ1jO+xj6XDxjEL8ACuT8Iq
 9wFJluTCN6lfxyV8mrSfweT0fQh/W/zVF7EJZHWdKXEzuADxMp9X06wtMQ82ea+k
 /wgN7DUpBZczRtlqaxt1VSkER75QwAMy/oSpA974+O120QCwLMQ=
 =aux1
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:

 - Minor bug fixes in mlx5, mthca, pvrdma, rtrs, mlx4, hfi1, hns

 - Minor cleanups: coding style, useless includes and documentation

 - Reorganize how multicast processing works in rxe

 - Replace a red/black tree with xarray in rxe which improves performance

 - DSCP support and HW address handle re-use in irdma

 - Simplify the mailbox command handling in hns

 - Simplify iser now that FMR is eliminated

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (93 commits)
  RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit()
  IB/iser: Fix error flow in case of registration failure
  IB/iser: Generalize map/unmap dma tasks
  IB/iser: Use iser_fr_desc as registration context
  IB/iser: Remove iser_reg_data_sg helper function
  RDMA/rxe: Use standard names for ref counting
  RDMA/rxe: Replace red-black trees by xarrays
  RDMA/rxe: Shorten pool names in rxe_pool.c
  RDMA/rxe: Move max_elem into rxe_type_info
  RDMA/rxe: Replace obj by elem in declaration
  RDMA/rxe: Delete _locked() APIs for pool objects
  RDMA/rxe: Reverse the sense of RXE_POOL_NO_ALLOC
  RDMA/rxe: Replace mr by rkey in responder resources
  RDMA/rxe: Fix ref error in rxe_av.c
  RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT
  RDMA/irdma: Add support for address handle re-use
  RDMA/qib: Fix typos in comments
  RDMA/mlx5: Fix memory leak in error flow for subscribe event routine
  Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error"
  RDMA/rxe: Remove useless argument for update_state()
  ...
2022-03-24 19:17:39 -07:00
Kees Cook
25fd2d41b5 selftests: kselftest framework: provide "finished" helper
Instead of having each time that wants to use ksft_exit() have to figure
out the internals of kselftest.h, add the helper ksft_finished() that
makes sure the passes, xfails, and skips are equal to the test plan count.

Link: https://lkml.kernel.org/r/20220201013717.2464392-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
Johannes Weiner
9457056ac4 mm: madvise: MADV_DONTNEED_LOCKED
MADV_DONTNEED historically rejects mlocked ranges, but with MLOCK_ONFAULT
and MCL_ONFAULT allowing to mlock without populating, there are valid use
cases for depopulating locked ranges as well.

Users mlock memory to protect secrets.  There are allocators for secure
buffers that want in-use memory generally mlocked, but cleared and
invalidated memory to give up the physical pages.  This could be done with
explicit munlock -> mlock calls on free -> alloc of course, but that adds
two unnecessary syscalls, heavy mmap_sem write locks, vma splits and
re-merges - only to get rid of the backing pages.

Users also mlockall(MCL_ONFAULT) to suppress sustained paging, but are
okay with on-demand initial population.  It seems valid to selectively
free some memory during the lifetime of such a process, without having to
mess with its overall policy.

Why add a separate flag? Isn't this a pretty niche usecase?

- MADV_DONTNEED has been bailing on locked vmas forever. It's at least
  conceivable that someone, somewhere is relying on mlock to protect
  data from perhaps broader invalidation calls. Changing this behavior
  now could lead to quiet data corruption.

- It also clarifies expectations around MADV_FREE and maybe
  MADV_REMOVE. It avoids the situation where one quietly behaves
  different than the others. MADV_FREE_LOCKED can be added later.

- The combination of mlock() and madvise() in the first place is
  probably niche. But where it happens, I'd say that dropping pages
  from a locked region once they don't contain secrets or won't page
  anymore is much saner than relying on mlock to protect memory from
  speculative or errant invalidation calls. It's just that we can't
  change the default behavior because of the two previous points.

Given that, an explicit new flag seems to make the most sense.

[hannes@cmpxchg.org: fix mips build]

Link: https://lkml.kernel.org/r/20220304171912.305060-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
Mauricio Faria de Oliveira
6c8e2a2569 mm: fix race between MADV_FREE reclaim and blkdev direct IO read
Problem:
=======

Userspace might read the zero-page instead of actual data from a direct IO
read on a block device if the buffers have been called madvise(MADV_FREE)
on earlier (this is discussed below) due to a race between page reclaim on
MADV_FREE and blkdev direct IO read.

- Race condition:
  ==============

During page reclaim, the MADV_FREE page check in try_to_unmap_one() checks
if the page is not dirty, then discards its rmap PTE(s) (vs.  remap back
if the page is dirty).

However, after try_to_unmap_one() returns to shrink_page_list(), it might
keep the page _anyway_ if page_ref_freeze() fails (it expects exactly
_one_ page reference, from the isolation for page reclaim).

Well, blkdev_direct_IO() gets references for all pages, and on READ
operations it only sets them dirty _later_.

So, if MADV_FREE'd pages (i.e., not dirty) are used as buffers for direct
IO read from block devices, and page reclaim happens during
__blkdev_direct_IO[_simple]() exactly AFTER bio_iov_iter_get_pages()
returns, but BEFORE the pages are set dirty, the situation happens.

The direct IO read eventually completes.  Now, when userspace reads the
buffers, the PTE is no longer there and the page fault handler
do_anonymous_page() services that with the zero-page, NOT the data!

A synthetic reproducer is provided.

- Page faults:
  ===========

If page reclaim happens BEFORE bio_iov_iter_get_pages() the issue doesn't
happen, because that faults-in all pages as writeable, so
do_anonymous_page() sets up a new page/rmap/PTE, and that is used by
direct IO.  The userspace reads don't fault as the PTE is there (thus
zero-page is not used/setup).

But if page reclaim happens AFTER it / BEFORE setting pages dirty, the PTE
is no longer there; the subsequent page faults can't help:

The data-read from the block device probably won't generate faults due to
DMA (no MMU) but even in the case it wouldn't use DMA, that happens on
different virtual addresses (not user-mapped addresses) because `struct
bio_vec` stores `struct page` to figure addresses out (which are different
from user-mapped addresses) for the read.

Thus userspace reads (to user-mapped addresses) still fault, then
do_anonymous_page() gets another `struct page` that would address/ map to
other memory than the `struct page` used by `struct bio_vec` for the read.
(The original `struct page` is not available, since it wasn't freed, as
page_ref_freeze() failed due to more page refs.  And even if it were
available, its data cannot be trusted anymore.)

Solution:
========

One solution is to check for the expected page reference count in
try_to_unmap_one().

There should be one reference from the isolation (that is also checked in
shrink_page_list() with page_ref_freeze()) plus one or more references
from page mapping(s) (put in discard: label).  Further references mean
that rmap/PTE cannot be unmapped/nuked.

(Note: there might be more than one reference from mapping due to
fork()/clone() without CLONE_VM, which use the same `struct page` for
references, until the copy-on-write page gets copied.)

So, additional page references (e.g., from direct IO read) now prevent the
rmap/PTE from being unmapped/dropped; similarly to the page is not freed
per shrink_page_list()/page_ref_freeze()).

- Races and Barriers:
  ==================

The new check in try_to_unmap_one() should be safe in races with
bio_iov_iter_get_pages() in get_user_pages() fast and slow paths, as it's
done under the PTE lock.

The fast path doesn't take the lock, but it checks if the PTE has changed
and if so, it drops the reference and leaves the page for the slow path
(which does take that lock).

The fast path requires synchronization w/ full memory barrier: it writes
the page reference count first then it reads the PTE later, while
try_to_unmap() writes PTE first then it reads page refcount.

And a second barrier is needed, as the page dirty flag should not be read
before the page reference count (as in __remove_mapping()).  (This can be
a load memory barrier only; no writes are involved.)

Call stack/comments:

- try_to_unmap_one()
  - page_vma_mapped_walk()
    - map_pte()			# see pte_offset_map_lock():
        pte_offset_map()
        spin_lock()

  - ptep_get_and_clear()	# write PTE
  - smp_mb()			# (new barrier) GUP fast path
  - page_ref_count()		# (new check) read refcount

  - page_vma_mapped_walk_done()	# see pte_unmap_unlock():
      pte_unmap()
      spin_unlock()

- bio_iov_iter_get_pages()
  - __bio_iov_iter_get_pages()
    - iov_iter_get_pages()
      - get_user_pages_fast()
        - internal_get_user_pages_fast()

          # fast path
          - lockless_pages_from_mm()
            - gup_{pgd,p4d,pud,pmd,pte}_range()
                ptep = pte_offset_map()		# not _lock()
                pte = ptep_get_lockless(ptep)

                page = pte_page(pte)
                try_grab_compound_head(page)	# inc refcount
                                            	# (RMW/barrier
                                             	#  on success)

                if (pte_val(pte) != pte_val(*ptep)) # read PTE
                        put_compound_head(page) # dec refcount
                        			# go slow path

          # slow path
          - __gup_longterm_unlocked()
            - get_user_pages_unlocked()
              - __get_user_pages_locked()
                - __get_user_pages()
                  - follow_{page,p4d,pud,pmd}_mask()
                    - follow_page_pte()
                        ptep = pte_offset_map_lock()
                        pte = *ptep
                        page = vm_normal_page(pte)
                        try_grab_page(page)	# inc refcount
                        pte_unmap_unlock()

- Huge Pages:
  ==========

Regarding transparent hugepages, that logic shouldn't change, as MADV_FREE
(aka lazyfree) pages are PageAnon() && !PageSwapBacked()
(madvise_free_pte_range() -> mark_page_lazyfree() -> lru_lazyfree_fn())
thus should reach shrink_page_list() -> split_huge_page_to_list() before
try_to_unmap[_one](), so it deals with normal pages only.

(And in case unlikely/TTU_SPLIT_HUGE_PMD/split_huge_pmd_address() happens,
which should not or be rare, the page refcount should be greater than
mapcount: the head page is referenced by tail pages.  That also prevents
checking the head `page` then incorrectly call page_remove_rmap(subpage)
for a tail page, that isn't even in the shrink_page_list()'s page_list (an
effect of split huge pmd/pmvw), as it might happen today in this unlikely
scenario.)

MADV_FREE'd buffers:
===================

So, back to the "if MADV_FREE pages are used as buffers" note.  The case
is arguable, and subject to multiple interpretations.

The madvise(2) manual page on the MADV_FREE advice value says:

1) 'After a successful MADV_FREE ... data will be lost when
   the kernel frees the pages.'
2) 'the free operation will be canceled if the caller writes
   into the page' / 'subsequent writes ... will succeed and
   then [the] kernel cannot free those dirtied pages'
3) 'If there is no subsequent write, the kernel can free the
   pages at any time.'

Thoughts, questions, considerations... respectively:

1) Since the kernel didn't actually free the page (page_ref_freeze()
   failed), should the data not have been lost? (on userspace read.)
2) Should writes performed by the direct IO read be able to cancel
   the free operation?
   - Should the direct IO read be considered as 'the caller' too,
     as it's been requested by 'the caller'?
   - Should the bio technique to dirty pages on return to userspace
     (bio_check_pages_dirty() is called/used by __blkdev_direct_IO())
     be considered in another/special way here?
3) Should an upcoming write from a previously requested direct IO
   read be considered as a subsequent write, so the kernel should
   not free the pages? (as it's known at the time of page reclaim.)

And lastly:

Technically, the last point would seem a reasonable consideration and
balance, as the madvise(2) manual page apparently (and fairly) seem to
assume that 'writes' are memory access from the userspace process (not
explicitly considering writes from the kernel or its corner cases; again,
fairly)..  plus the kernel fix implementation for the corner case of the
largely 'non-atomic write' encompassed by a direct IO read operation, is
relatively simple; and it helps.

Reproducer:
==========

@ test.c (simplified, but works)

	#define _GNU_SOURCE
	#include <fcntl.h>
	#include <stdio.h>
	#include <unistd.h>
	#include <sys/mman.h>

	int main() {
		int fd, i;
		char *buf;

		fd = open(DEV, O_RDONLY | O_DIRECT);

		buf = mmap(NULL, BUF_SIZE, PROT_READ | PROT_WRITE,
                	   MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);

		for (i = 0; i < BUF_SIZE; i += PAGE_SIZE)
			buf[i] = 1; // init to non-zero

		madvise(buf, BUF_SIZE, MADV_FREE);

		read(fd, buf, BUF_SIZE);

		for (i = 0; i < BUF_SIZE; i += PAGE_SIZE)
			printf("%p: 0x%x\n", &buf[i], buf[i]);

		return 0;
	}

@ block/fops.c (formerly fs/block_dev.c)

	+#include <linux/swap.h>
	...
	... __blkdev_direct_IO[_simple](...)
	{
	...
	+	if (!strcmp(current->comm, "good"))
	+		shrink_all_memory(ULONG_MAX);
	+
         	ret = bio_iov_iter_get_pages(...);
	+
	+	if (!strcmp(current->comm, "bad"))
	+		shrink_all_memory(ULONG_MAX);
	...
	}

@ shell

        # NUM_PAGES=4
        # PAGE_SIZE=$(getconf PAGE_SIZE)

        # yes | dd of=test.img bs=${PAGE_SIZE} count=${NUM_PAGES}
        # DEV=$(losetup -f --show test.img)

        # gcc -DDEV=\"$DEV\" \
              -DBUF_SIZE=$((PAGE_SIZE * NUM_PAGES)) \
              -DPAGE_SIZE=${PAGE_SIZE} \
               test.c -o test

        # od -tx1 $DEV
        0000000 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a
        *
        0040000

        # mv test good
        # ./good
        0x7f7c10418000: 0x79
        0x7f7c10419000: 0x79
        0x7f7c1041a000: 0x79
        0x7f7c1041b000: 0x79

        # mv good bad
        # ./bad
        0x7fa1b8050000: 0x0
        0x7fa1b8051000: 0x0
        0x7fa1b8052000: 0x0
        0x7fa1b8053000: 0x0

Note: the issue is consistent on v5.17-rc3, but it's intermittent with the
support of MADV_FREE on v4.5 (60%-70% error; needs swap).  [wrap
do_direct_IO() in do_blockdev_direct_IO() @ fs/direct-io.c].

- v5.17-rc3:

        # for i in {1..1000}; do ./good; done \
            | cut -d: -f2 | sort | uniq -c
           4000  0x79

        # mv good bad
        # for i in {1..1000}; do ./bad; done \
            | cut -d: -f2 | sort | uniq -c
           4000  0x0

        # free | grep Swap
        Swap:             0           0           0

- v4.5:

        # for i in {1..1000}; do ./good; done \
            | cut -d: -f2 | sort | uniq -c
           4000  0x79

        # mv good bad
        # for i in {1..1000}; do ./bad; done \
            | cut -d: -f2 | sort | uniq -c
           2702  0x0
           1298  0x79

        # swapoff -av
        swapoff /swap

        # for i in {1..1000}; do ./bad; done \
            | cut -d: -f2 | sort | uniq -c
           4000  0x79

Ceph/TCMalloc:
=============

For documentation purposes, the use case driving the analysis/fix is Ceph
on Ubuntu 18.04, as the TCMalloc library there still uses MADV_FREE to
release unused memory to the system from the mmap'ed page heap (might be
committed back/used again; it's not munmap'ed.) - PageHeap::DecommitSpan()
-> TCMalloc_SystemRelease() -> madvise() - PageHeap::CommitSpan() ->
TCMalloc_SystemCommit() -> do nothing.

Note: TCMalloc switched back to MADV_DONTNEED a few commits after the
release in Ubuntu 18.04 (google-perftools/gperftools 2.5), so the issue
just 'disappeared' on Ceph on later Ubuntu releases but is still present
in the kernel, and can be hit by other use cases.

The observed issue seems to be the old Ceph bug #22464 [1], where checksum
mismatches are observed (and instrumentation with buffer dumps shows
zero-pages read from mmap'ed/MADV_FREE'd page ranges).

The issue in Ceph was reasonably deemed a kernel bug (comment #50) and
mostly worked around with a retry mechanism, but other parts of Ceph could
still hit that (rocksdb).  Anyway, it's less likely to be hit again as
TCMalloc switched out of MADV_FREE by default.

(Some kernel versions/reports from the Ceph bug, and relation with
the MADV_FREE introduction/changes; TCMalloc versions not checked.)
- 4.4 good
- 4.5 (madv_free: introduction)
- 4.9 bad
- 4.10 good? maybe a swapless system
- 4.12 (madv_free: no longer free instantly on swapless systems)
- 4.13 bad

[1] https://tracker.ceph.com/issues/22464

Thanks:
======

Several people contributed to analysis/discussions/tests/reproducers in
the first stages when drilling down on ceph/tcmalloc/linux kernel:

- Dan Hill
- Dan Streetman
- Dongdong Tao
- Gavin Guo
- Gerald Yang
- Heitor Alves de Siqueira
- Ioanna Alifieraki
- Jay Vosburgh
- Matthew Ruffell
- Ponnuvel Palaniyappan

Reviews, suggestions, corrections, comments:

- Minchan Kim
- Yu Zhao
- Huang, Ying
- John Hubbard
- Christoph Hellwig

[mfo@canonical.com: v4]
  Link: https://lkml.kernel.org/r/20220209202659.183418-1-mfo@canonical.comLink: https://lkml.kernel.org/r/20220131230255.789059-1-mfo@canonical.com

Fixes: 802a3a92ad ("mm: reclaim MADV_FREE pages")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Hill <daniel.hill@canonical.com>
Cc: Dan Streetman <dan.streetman@canonical.com>
Cc: Dongdong Tao <dongdong.tao@canonical.com>
Cc: Gavin Guo <gavin.guo@canonical.com>
Cc: Gerald Yang <gerald.yang@canonical.com>
Cc: Heitor Alves de Siqueira <halves@canonical.com>
Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Cc: Matthew Ruffell <matthew.ruffell@canonical.com>
Cc: Ponnuvel Palaniyappan <ponnuvel.palaniyappan@canonical.com>
Cc: <stable@vger.kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
Anshuman Khandual
24e988c7fd mm: generalize ARCH_HAS_FILTER_PGPROT
ARCH_HAS_FILTER_PGPROT config has duplicate definitions on platforms that
subscribe it.  Instead make it a generic config option which can be
selected on applicable platforms when required.

Link: https://lkml.kernel.org/r/1643004823-16441-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
Hugh Dickins
2c86599516 mm: unmap_mapping_range_tree() with i_mmap_rwsem shared
Revert 48ec833b78 ("Revert "mm/memory.c: share the i_mmap_rwsem"") to
reinstate c8475d144a ("mm/memory.c: share the i_mmap_rwsem"): the
unmap_mapping_range family of functions do the unmapping of user pages
(ultimately via zap_page_range_single) without modifying the interval tree
itself, and unmapping races are necessarily guarded by page table lock,
thus the i_mmap_rwsem should be shared in unmap_mapping_pages() and
unmap_mapping_folio().

Commit 48ec833b78 was intended as a short-term measure, allowing the
other shared lock changes into 3.19 final, before investigating three
trinity crashes, one of which had been bisected to commit c8475d144a:

[1] https://lkml.org/lkml/2014/11/14/342
https://lore.kernel.org/lkml/5466142C.60100@oracle.com/
[2] https://lkml.org/lkml/2014/12/22/213
https://lore.kernel.org/lkml/549832E2.8060609@oracle.com/
[3] https://lkml.org/lkml/2014/12/9/741
https://lore.kernel.org/lkml/5487ACC5.1010002@oracle.com/

Two of those were Bad page states: free_pages_prepare() found PG_mlocked
still set - almost certain to have been fixed by 4.4 commit b87537d9e2
("mm: rmap use pte lock not mmap_sem to set PageMlocked").  The NULL deref
on rwsem in [2]: unclear, only happened once, not bisected to c8475d144a.

No change to the i_mmap_lock_write() around __unmap_hugepage_range_final()
in unmap_single_vma(): IIRC that's a special usage, helping to serialize
hugetlbfs page table sharing, not to be dabbled with lightly.  No change
to other uses of i_mmap_lock_write() by hugetlbfs.

I am not aware of any significant gains from the concurrency allowed by
this commit: it is submitted more to resolve an ancient misunderstanding.

Link: https://lkml.kernel.org/r/e4a5e356-6c87-47b2-3ce8-c2a95ae84e20@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
Hugh Dickins
566d336288 mm: warn on deleting redirtied only if accounted
filemap_unaccount_folio() has a WARN_ON_ONCE(folio_test_dirty(folio)).  It
is good to warn of late dirtying on a persistent filesystem, but late
dirtying on tmpfs can only lose data which is expected to be thrown away;
and it's a pity if that warning comes ONCE on tmpfs, then hides others
which really matter.  Make it conditional on mapping_cap_writeback().

Cleanup: then folio_account_cleaned() no longer needs to check that for
itself, and so no longer needs to know the mapping.

Link: https://lkml.kernel.org/r/b5a1106c-7226-a5c6-ad41-ad4832cae1f@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
David Hildenbrand
7f7609175f mm/huge_memory: remove stale locking logic from __split_huge_pmd()
Let's remove the stale logic that was required for reuse_swap_page().

[akpm@linux-foundation.org: simplification, per Yang Shi]

Link: https://lkml.kernel.org/r/20220131162940.210846-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
David Hildenbrand
55c62fa7c5 mm/huge_memory: remove stale page_trans_huge_mapcount()
All users are gone, let's remove it.

Link: https://lkml.kernel.org/r/20220131162940.210846-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
David Hildenbrand
03104c2c5d mm/swapfile: remove stale reuse_swap_page()
All users are gone, let's remove it.  We'll let SWP_STABLE_WRITES stick
around for now, as it might come in handy in the near future.

Link: https://lkml.kernel.org/r/20220131162940.210846-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
David Hildenbrand
363106c4ce mm/khugepaged: remove reuse_swap_page() usage
reuse_swap_page() currently indicates if we can write to an anon page
without COW.  A COW is required if the page is shared by multiple
processes (either already mapped or via swap entries) or if there is
concurrent writeback that cannot tolerate concurrent page modifications.

However, in the context of khugepaged we're not actually going to write to
a read-only mapped page, we'll copy the page content to our newly
allocated THP and map that THP writable.  All we have to make sure is that
the read-only mapped page we're about to copy won't get reused by another
process sharing the page, otherwise, page content would get modified.  But
that is already guaranteed via multiple mechanisms (e.g., holding a
reference, holding the page lock, removing the rmap after copying the
page).

The swapcache handling was introduced in commit 10359213d0 ("mm:
incorporate read-only pages into transparent huge pages") and it sounds
like it merely wanted to mimic what do_swap_page() would do when trying to
map a page obtained via the swapcache writable.

As that logic is unnecessary, let's just remove it, removing the last user
of reuse_swap_page().

Link: https://lkml.kernel.org/r/20220131162940.210846-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:51 -07:00
David Hildenbrand
3bff7e3f1f mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page()
We currently have a different COW logic for anon THP than we have for
ordinary anon pages in do_wp_page(): the effect is that the issue reported
in CVE-2020-29374 is currently still possible for anon THP: an unintended
information leak from the parent to the child.

Let's apply the same logic (page_count() == 1), with similar optimizations
to remove additional references first as we really want to avoid
PTE-mapping the THP and copying individual pages best we can.

If we end up with a page that has page_count() != 1, we'll have to PTE-map
the THP and fallback to do_wp_page(), which will always copy the page.

Note that KSM does not apply to THP.

I. Interaction with the swapcache and writeback

While a THP is in the swapcache, the swapcache holds one reference on each
subpage of the THP.  So with PageSwapCache() set, we expect as many
additional references as we have subpages.  If we manage to remove the THP
from the swapcache, all these references will be gone.

Usually, a THP is not split when entered into the swapcache and stays a
compound page.  However, try_to_unmap() will PTE-map the THP and use PTE
swap entries.  There are no PMD swap entries for that purpose,
consequently, we always only swapin subpages into PTEs.

Removing a page from the swapcache can fail either when there are
remaining swap entries (in which case COW is the right thing to do) or if
the page is currently under writeback.

Having a locked, R/O PMD-mapped THP that is in the swapcache seems to be
possible only in corner cases, for example, if try_to_unmap() failed after
adding the page to the swapcache.  However, it's comparatively easy to
handle.

As we have to fully unmap a THP before starting writeback, and swapin is
always done on the PTE level, we shouldn't find a R/O PMD-mapped THP in
the swapcache that is under writeback.  This should at least leave
writeback out of the picture.

II. Interaction with GUP references

Having a R/O PMD-mapped THP with GUP references (i.e., R/O references)
will result in PTE-mapping the THP on a write fault.  Similar to ordinary
anon pages, do_wp_page() will have to copy sub-pages and result in a
disconnect between the GUP references and the pages actually mapped into
the page tables.  To improve the situation in the future, we'll need
additional handling to mark anonymous pages as definitely exclusive to a
single process, only allow GUP pins on exclusive anon pages, and disallow
sharing of exclusive anon pages with GUP pins e.g., during fork().

III. Interaction with references from LRU pagevecs

There is no need to try draining the (local) LRU pagevecs in case we would
stumble over a !PageLRU() page: folio_add_lru() and friends will always
flush the affected pagevec after adding a compound page to it immediately
-- pagevec_add_and_need_flush() always returns "true" for them.  Note that
the LRU pagevecs will hold a reference on the compound page for a very
short time, between adding the page to the pagevec and draining it
immediately afterwards.

IV. Interaction with speculative/temporary references

Similar to ordinary anon pages, other speculative/temporary references on
the THP, for example, from the pagecache or page migration code, will
disallow exclusive reuse of the page.  We'll have to PTE-map the THP.

Link: https://lkml.kernel.org/r/20220131162940.210846-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
David Hildenbrand
c145e0b47c mm: streamline COW logic in do_swap_page()
Currently we have a different COW logic when:
* triggering a read-fault to swapin first and then trigger a write-fault
  -> do_swap_page() + do_wp_page()
* triggering a write-fault to swapin
  -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page()

The COW logic in do_swap_page() is different than our reuse logic in
do_wp_page().  The COW logic in do_wp_page() -- page_count() == 1 -- makes
currently sure that we certainly don't have a remaining reference, e.g.,
via GUP, on the target page we want to reuse: if there is any unexpected
reference, we have to copy to avoid information leaks.

As do_swap_page() behaves differently, in environments with swap enabled
we can currently have an unintended information leak from the parent to
the child, similar as known from CVE-2020-29374:

	1. Parent writes to anonymous page
	-> Page is mapped writable and modified
	2. Page is swapped out
	-> Page is unmapped and replaced by swap entry
	3. fork()
	-> Swap entries are copied to child
	4. Child pins page R/O
	-> Page is mapped R/O into child
	5. Child unmaps page
	-> Child still holds GUP reference
	6. Parent writes to page
	-> Page is reused in do_swap_page()
	-> Child can observe changes

Exchanging 2. and 3. should have the same effect.

Let's apply the same COW logic as in do_wp_page(), conditionally trying to
remove the page from the swapcache after freeing the swap entry, however,
before actually mapping our page.  We can change the order now that we use
try_to_free_swap(), which doesn't care about the mapcount, instead of
reuse_swap_page().

To handle references from the LRU pagevecs, conditionally drain the local
LRU pagevecs when required, however, don't consider the page_count() when
deciding whether to drain to keep it simple for now.

Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
David Hildenbrand
84d60fdd37 mm: slightly clarify KSM logic in do_swap_page()
Let's make it clearer that KSM might only have to copy a page in case we
have a page in the swapcache, not if we allocated a fresh page and
bypassed the swapcache.  While at it, add a comment why this is usually
necessary and merge the two swapcache conditions.

[akpm@linux-foundation.org: fix comment, per David]

Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
David Hildenbrand
d4c470970d mm: optimize do_wp_page() for fresh pages in local LRU pagevecs
For example, if a page just got swapped in via a read fault, the LRU
pagevecs might still hold a reference to the page.  If we trigger a write
fault on such a page, the additional reference from the LRU pagevecs will
prohibit reusing the page.

Let's conditionally drain the local LRU pagevecs when we stumble over a
!PageLRU() page.  We cannot easily drain remote LRU pagevecs and it might
not be desirable performance-wise.  Consequently, this will only avoid
copying in some cases.

Add a simple "page_count(page) > 3" check first but keep the
"page_count(page) > 1 + PageSwapCache(page)" check in place, as we want to
minimize cases where we remove a page from the swapcache but won't be able
to reuse it, for example, because another process has it mapped R/O, to
not affect reclaim.

We cannot easily handle the following cases and we will always have to
copy:

(1) The page is referenced in the LRU pagevecs of other CPUs. We really
    would have to drain the LRU pagevecs of all CPUs -- most probably
    copying is much cheaper.

(2) The page is already PageLRU() but is getting moved between LRU
    lists, for example, for activation (e.g., mark_page_accessed()),
    deactivation (MADV_COLD), or lazyfree (MADV_FREE). We'd have to
    drain mostly unconditionally, which might be bad performance-wise.
    Most probably this won't happen too often in practice.

Note that there are other reasons why an anon page might temporarily not
be PageLRU(): for example, compaction and migration have to isolate LRU
pages from the LRU lists first (isolate_lru_page()), moving them to
temporary local lists and clearing PageLRU() and holding an additional
reference on the page.  In that case, we'll always copy.

This change seems to be fairly effective with the reproducer [1] shared by
Nadav, as long as writeback is done synchronously, for example, using
zram.  However, with asynchronous writeback, we'll usually fail to free
the swapcache because the page is still under writeback: something we
cannot easily optimize for, and maybe it's not really relevant in
practice.

[1] https://lkml.kernel.org/r/0480D692-D9B2-429A-9A88-9BBA1331AC3A@gmail.com

Link: https://lkml.kernel.org/r/20220131162940.210846-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
David Hildenbrand
53a05ad9f2 mm: optimize do_wp_page() for exclusive pages in the swapcache
Patch series "mm: COW fixes part 1: fix the COW security issue for THP and swap", v3.

This series attempts to optimize and streamline the COW logic for ordinary
anon pages and THP anon pages, fixing two remaining instances of
CVE-2020-29374 in do_swap_page() and do_huge_pmd_wp_page(): information
can leak from a parent process to a child process via anonymous pages
shared during fork().

This issue, including other related COW issues, has been summarized in [2]:

 "1. Observing Memory Modifications of Private Pages From A Child Process

  Long story short: process-private memory might not be as private as you
  think once you fork(): successive modifications of private memory
  regions in the parent process can still be observed by the child
  process, for example, by smart use of vmsplice()+munmap().

  The core problem is that pinning pages readable in a child process, such
  as done via the vmsplice system call, can result in a child process
  observing memory modifications done in the parent process the child is
  not supposed to observe. [1] contains an excellent summary and [2]
  contains further details. This issue was assigned CVE-2020-29374 [9].

  For this to trigger, it's required to use a fork() without subsequent
  exec(), for example, as used under Android zygote. Without further
  details about an application that forks less-privileged child processes,
  one cannot really say what's actually affected and what's not -- see the
  details section the end of this mail for a short sshd/openssh analysis.

  While commit 17839856fd ("gup: document and work around "COW can break
  either way" issue") fixed this issue and resulted in other problems
  (e.g., ptrace on pmem), commit 09854ba94c ("mm: do_wp_page()
  simplification") re-introduced part of the problem unfortunately.

  The original reproducer can be modified quite easily to use THP [3] and
  make the issue appear again on upstream kernels. I modified it to use
  hugetlb [4] and it triggers as well. The problem is certainly less
  severe with hugetlb than with THP; it merely highlights that we still
  have plenty of open holes we should be closing/fixing.

  Regarding vmsplice(), the only known workaround is to disallow the
  vmsplice() system call ... or disable THP and hugetlb. But who knows
  what else is affected (RDMA? O_DIRECT?) to achieve the same goal -- in
  the end, it's a more generic issue"

This security issue was first reported by Jann Horn on 27 May 2020 and it
currently affects anonymous pages during swapin, anonymous THP and hugetlb.
This series tackles anonymous pages during swapin and anonymous THP:

 - do_swap_page() for handling COW on PTEs during swapin directly

 - do_huge_pmd_wp_page() for handling COW on PMD-mapped THP during write
   faults

With this series, we'll apply the same COW logic we have in do_wp_page()
to all swappable anon pages: don't reuse (map writable) the page in
case there are additional references (page_count() != 1). All users of
reuse_swap_page() are remove, and consequently reuse_swap_page() is
removed.

In general, we're struggling with the following COW-related issues:

(1) "missed COW": we miss to copy on write and reuse the page (map it
    writable) although we must copy because there are pending references
    from another process to this page. The result is a security issue.

(2) "wrong COW": we copy on write although we wouldn't have to and
    shouldn't: if there are valid GUP references, they will become out
    of sync with the pages mapped into the page table. We fail to detect
    that such a page can be reused safely, especially if never more than
    a single process mapped the page. The result is an intra process
    memory corruption.

(3) "unnecessary COW": we copy on write although we wouldn't have to:
    performance degradation and temporary increases swap+memory
    consumption can be the result.

While this series fixes (1) for swappable anon pages, it tries to reduce
reported cases of (3) first as good and easy as possible to limit the
impact when streamlining.  The individual patches try to describe in
which cases we will run into (3).

This series certainly makes (2) worse for THP, because a THP will now
get PTE-mapped on write faults if there are additional references, even
if there was only ever a single process involved: once PTE-mapped, we'll
copy each and every subpage and won't reuse any subpage as long as the
underlying compound page wasn't split.

I'm working on an approach to fix (2) and improve (3): PageAnonExclusive
to mark anon pages that are exclusive to a single process, allow GUP
pins only on such exclusive pages, and allow turning exclusive pages
shared (clearing PageAnonExclusive) only if there are no GUP pins.  Anon
pages with PageAnonExclusive set never have to be copied during write
faults, but eventually during fork() if they cannot be turned shared.
The improved reuse logic in this series will essentially also be the
logic to reset PageAnonExclusive.  This work will certainly take a
while, but I'm planning on sharing details before having code fully
ready.

#1-#5 can be applied independently of the rest. #6-#9 are mostly only
cleanups related to reuse_swap_page().

Notes:
* For now, I'll leave hugetlb code untouched: "unnecessary COW" might
  easily break existing setups because hugetlb pages are a scarce resource
  and we could just end up having to crash the application when we run out
  of hugetlb pages. We have to be very careful and the security aspect with
  hugetlb is most certainly less relevant than for unprivileged anon pages.
* Instead of lru_add_drain() we might actually just drain the lru_add list
  or even just remove the single page of interest from the lru_add list.
  This would require a new helper function, and could be added if the
  conditional lru_add_drain() turn out to be a problem.
* I extended the test case already included in [1] to also test for the
  newly found do_swap_page() case. I'll send that out separately once/if
  this part was merged.

[1] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com
[2] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com

This patch (of 9):

Liang Zhang reported [1] that the current COW logic in do_wp_page() is
sub-optimal when it comes to swap+read fault+write fault of anonymous
pages that have a single user, visible via a performance degradation in
the redis benchmark.  Something similar was previously reported [2] by
Nadav with a simple reproducer.

After we put an anon page into the swapcache and unmapped it from a single
process, that process might read that page again and refault it read-only.
If that process then writes to that page, the process is actually the
exclusive user of the page, however, the COW logic in do_co_page() won't
be able to reuse it due to the additional reference from the swapcache.

Let's optimize for pages that have been added to the swapcache but only
have an exclusive user.  Try removing the swapcache reference if there is
hope that we're the exclusive user.

We will fail removing the swapcache reference in two scenarios:
(1) There are additional swap entries referencing the page: copying
    instead of reusing is the right thing to do.
(2) The page is under writeback: theoretically we might be able to reuse
    in some cases, however, we cannot remove the additional reference
    and will have to copy.

Note that we'll only try removing the page from the swapcache when it's
highly likely that we'll be the exclusive owner after removing the page
from the swapache.  As we're about to map that page writable and redirty
it, that should not affect reclaim but is rather the right thing to do.

Further, we might have additional references from the LRU pagevecs, which
will force us to copy instead of being able to reuse.  We'll try handling
such references for some scenarios next.  Concurrent writeback cannot be
handled easily and we'll always have to copy.

While at it, remove the superfluous page_mapcount() check: it's
implicitly covered by the page_count() for ordinary anon pages.

[1] https://lkml.kernel.org/r/20220113140318.11117-1-zhangliang5@huawei.com
[2] https://lkml.kernel.org/r/0480D692-D9B2-429A-9A88-9BBA1331AC3A@gmail.com

Link: https://lkml.kernel.org/r/20220131162940.210846-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Liang Zhang <zhangliang5@huawei.com>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Miaohe Lin
562beb7235 mm/huge_memory: make is_transparent_hugepage() static
It's only used inside the huge_memory.c now. Don't export it and make
it static. We can thus reduce the size of huge_memory.o a bit.

Without this patch:
   text	   data	    bss	    dec	    hex	filename
  32319	   2965	      4	  35288	   89d8	mm/huge_memory.o

With this patch:
   text	   data	    bss	    dec	    hex	filename
  32042	   2957	      4	  35003	   88bb	mm/huge_memory.o

Link: https://lkml.kernel.org/r/20220302082145.12028-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Mike Kravetz
9ae8f2b849 userfaultfd/selftests: enable hugetlb remap and remove event testing
With MADV_DONTNEED support added to hugetlb mappings, mremap testing can
also be enabled for hugetlb.

Modify the tests to use madvise MADV_DONTNEED and MADV_REMOVE instead of
fallocate hole puch for releasing hugetlb pages.

Link: https://lkml.kernel.org/r/20220215002348.128823-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Mike Kravetz
c4b6cb8840 selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test
Now that MADV_DONTNEED support for hugetlb is enabled, add corresponding
tests.  MADV_REMOVE has been enabled for some time, but no tests exist so
add them as well.

Link: https://lkml.kernel.org/r/20220215002348.128823-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Mike Kravetz
90e7e7f5ef mm: enable MADV_DONTNEED for hugetlb mappings
Patch series "Add hugetlb MADV_DONTNEED support", v3.

Userfaultfd selftests for hugetlb does not perform UFFD_EVENT_REMAP
testing.  However, mremap support was recently added in commit
550a7d60bd ("mm, hugepages: add mremap() support for hugepage backed
vma").  While attempting to enable mremap support in the test, it was
discovered that the mremap test indirectly depends on MADV_DONTNEED.

madvise does not allow MADV_DONTNEED for hugetlb mappings.  However, that
is primarily due to the check in can_madv_lru_vma().  By simply removing
the check and adding huge page alignment, MADV_DONTNEED can be made to
work for hugetlb mappings.

Do note that there is no compelling use case for adding this support.
This was discussed in the RFC [1].  However, adding support makes sense as
it is fairly trivial and brings hugetlb functionality more in line with
'normal' memory.

After enabling support, add selftest for MADV_DONTNEED as well as
MADV_REMOVE.  Then update userfaultfd selftest.

If new functionality is accepted, then madvise man page will be updated to
indicate hugetlb is supported.  It will also be updated to clarify what
happens to the passed length argument.

This patch (of 3):

MADV_DONTNEED is currently disabled for hugetlb mappings.  This certainly
makes sense in shared file mappings as the pagecache maintains a reference
to the page and it will never be freed.  However, it could be useful to
unmap and free pages in private mappings.  In addition, userfaultfd minor
fault users may be able to simplify code by using MADV_DONTNEED.

The primary thing preventing MADV_DONTNEED from working on hugetlb
mappings is a check in can_madv_lru_vma().  To allow support for hugetlb
mappings create and use a new routine madvise_dontneed_free_valid_vma()
that allows hugetlb mappings in this specific case.

For normal mappings, madvise requires the start address be PAGE aligned
and rounds up length to the next multiple of PAGE_SIZE.  Do similarly for
hugetlb mappings: require start address be huge page size aligned and
round up length to the next multiple of huge page size.  Use the new
madvise_dontneed_free_valid_vma routine to check alignment and round up
length/end.  zap_page_range requires this alignment for hugetlb vmas
otherwise we will hit BUGs.

Link: https://lkml.kernel.org/r/20220215002348.128823-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220215002348.128823-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Andrey Konovalov
c32caa267b kasan: disable LOCKDEP when printing reports
If LOCKDEP detects a bug while KASAN is printing a report and if
panic_on_warn is set, KASAN will not be able to finish.  Disable LOCKDEP
while KASAN is printing a report.

See https://bugzilla.kernel.org/show_bug.cgi?id=202115 for an example
of the issue.

Link: https://lkml.kernel.org/r/c48a2a3288200b07e1788b77365c2f02784cfeb4.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Andrey Konovalov
80207910cd kasan: move and hide kasan_save_enable/restore_multi_shot
- Move kasan_save_enable/restore_multi_shot() declarations to
   mm/kasan/kasan.h, as there is no need for them to be visible outside
   of KASAN implementation.

 - Only define and export these functions when KASAN tests are enabled.

 - Move their definitions closer to other test-related code in report.c.

Link: https://lkml.kernel.org/r/6ba637333b78447f027d775f2d55ab1a40f63c99.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Andrey Konovalov
865bfa28ed kasan: reorder reporting functions
Move print_error_description()'s, report_suppressed()'s, and
report_enabled()'s definitions to improve the logical order of function
definitions in report.c.

No functional changes.

Link: https://lkml.kernel.org/r/82aa926c411e00e76e97e645a551ede9ed0c5e79.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Andrey Konovalov
c068664c97 kasan: respect KASAN_BIT_REPORTED in all reporting routines
Currently, only kasan_report() checks the KASAN_BIT_REPORTED and
KASAN_BIT_MULTI_SHOT flags.

Make other reporting routines check these flags as well.

Also add explanatory comments.

Note that the current->kasan_depth check is split out into
report_suppressed() and only called for kasan_report().

Link: https://lkml.kernel.org/r/715e346b10b398e29ba1b425299dcd79e29d58ce.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Andrey Konovalov
795b760fe7 kasan: add comment about UACCESS regions to kasan_report
Add a comment explaining why kasan_report() is the only reporting function
that uses user_access_save/restore().

Link: https://lkml.kernel.org/r/1201ca3c2be42c7bd077c53d2e46f4a51dd1476a.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Andrey Konovalov
c965cdd675 kasan: rename kasan_access_info to kasan_report_info
Rename kasan_access_info to kasan_report_info, as the latter name better
reflects the struct's purpose.

Link: https://lkml.kernel.org/r/158a4219a5d356901d017352558c989533a0782c.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:50 -07:00
Andrey Konovalov
bb2f967ce2 kasan: move and simplify kasan_report_async
Place kasan_report_async() next to the other main reporting routines.
Also simplify printed information.

Link: https://lkml.kernel.org/r/52d942ef3ffd29bdfa225bbe8e327bc5bda7ab09.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
31c65110b9 kasan: call print_report from kasan_report_invalid_free
Call print_report() in kasan_report_invalid_free() instead of calling
printing functions directly.  Compared to the existing implementation of
kasan_report_invalid_free(), print_report() makes sure that the buggy
address has metadata before printing it.

The change requires adding a report type field into kasan_access_info and
using it accordingly.

kasan_report_async() is left as is, as using print_report() will only
complicate the code.

Link: https://lkml.kernel.org/r/9ea6f0604c5d2e1fb28d93dc6c44232c1f8017fe.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
be8631a176 kasan: merge __kasan_report into kasan_report
Merge __kasan_report() into kasan_report().  The code is simple enough to
be readable without the __kasan_report() helper.

Link: https://lkml.kernel.org/r/c8a125497ef82f7042b3795918dffb81a85a878e.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
b3bb1d700e kasan: restructure kasan_report
Restructure kasan_report() to make reviewing the subsequent patches
easier.

Link: https://lkml.kernel.org/r/ca28042889858b8cc4724d3d4378387f90d7a59d.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
b91328002d kasan: simplify kasan_find_first_bad_addr call sites
Move the addr_has_metadata() check into kasan_find_first_bad_addr().

Link: https://lkml.kernel.org/r/a49576f7a23283d786ba61579cb0c5057e8f0b9b.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
9d7b7dd946 kasan: split out print_report from __kasan_report
Split out the part of __kasan_report() that prints things into
print_report().  One of the subsequent patches makes another error handler
use print_report() as well.

Includes lower-level changes:

 - Allow addr_has_metadata() accepting a tagged address.

 - Drop the const qualifier from the fields of kasan_access_info to
   avoid excessive type casts.

 - Change the type of the address argument of __kasan_report() and
   end_report() to void * to reduce the number of type casts.

Link: https://lkml.kernel.org/r/9be3ed99dd24b9c4e1c4a848b69a0c6ecefd845e.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
0a6e8a07de kasan: move disable_trace_on_warning to start_report
Move the disable_trace_on_warning() call, which enables the
/proc/sys/kernel/traceoff_on_warning interface for KASAN bugs, to
start_report(), so that it functions for all types of KASAN reports.

Link: https://lkml.kernel.org/r/7c066c5de26234ad2cebdd931adfe437f8a95d58.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
a260d2814e kasan: move update_kunit_status to start_report
Instead of duplicating calls to update_kunit_status() in every error
report routine, call it once in start_report().  Pass the sync flag as an
additional argument to start_report().

Link: https://lkml.kernel.org/r/cae5c845a0b6f3c867014e53737cdac56b11edc7.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
49d9977ac9 kasan: check CONFIG_KASAN_KUNIT_TEST instead of CONFIG_KUNIT
Check the more specific CONFIG_KASAN_KUNIT_TEST config option when
defining things related to KUnit-compatible KASAN tests instead of
CONFIG_KUNIT.

Also put the kunit_kasan_status definition next to the definitons of other
KASAN-related structs.

Link: https://lkml.kernel.org/r/223592d38d2a601a160a3b2b3d5a9f9090350e62.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
3784c299ea kasan: simplify kasan_update_kunit_status() and call sites
- Rename kasan_update_kunit_status() to update_kunit_status() (the
   function is static).

 - Move the IS_ENABLED(CONFIG_KUNIT) to the function's definition
   instead of duplicating it at call sites.

 - Obtain and check current->kunit_test within the function.

Link: https://lkml.kernel.org/r/dac26d811ae31856c3d7666de0b108a3735d962d.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
476b1dc2bc kasan: simplify async check in end_report()
Currently, end_report() does not call trace_error_report_end() for bugs
detected in either async or asymm mode (when kasan_async_fault_possible()
returns true), as the address of the bad access might be unknown.

However, for asymm mode, the address is known for faults triggered by read
operations.

Instead of using kasan_async_fault_possible(), simply check that the addr
is not NULL when calling trace_error_report_end().

Link: https://lkml.kernel.org/r/1c8ce43f97300300e62c941181afa2eb738965c5.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
1e0f611fab kasan: print basic stack frame info for SW_TAGS
Software Tag-Based mode tags stack allocations when CONFIG_KASAN_STACK
is enabled. Print task name and id in reports for stack-related bugs.

[andreyknvl@google.com: include linux/sched/task_stack.h]
  Link: https://lkml.kernel.org/r/d7598f11a34ed96e508f7640fa038662ed2305ec.1647099922.git.andreyknvl@google.com

Link: https://lkml.kernel.org/r/029aaa87ceadde0702f3312a34697c9139c9fb53.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
16347c3189 kasan: improve stack frame info in reports
- Print at least task name and id for reports affecting allocas
   (get_address_stack_frame_info() does not support them).

 - Capitalize first letter of each sentence.

Link: https://lkml.kernel.org/r/aa613f097c12f7b75efb17f2618ae00480fb4bc3.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
0f9b35f383 kasan: rearrange stack frame info in reports
- Move printing stack frame info before printing page info.

 - Add object_is_on_stack() check to print_address_description() and add
   a corresponding WARNING to kasan_print_address_stack_frame(). This
   looks more in line with the rest of the checks in this function and
   also allows to avoid complicating code logic wrt line breaks.

 - Clean up comments related to get_address_stack_frame_info().

Link: https://lkml.kernel.org/r/1ee113a4c111df97d168c820b527cda77a3cac40.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
038fd2b4cb kasan: more line breaks in reports
Add a line break after each part that describes the buggy address.
Improves readability of reports.

Link: https://lkml.kernel.org/r/8682c4558e533cd0f99bdb964ce2fe741f2a9212.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:49 -07:00
Andrey Konovalov
7131c883f9 kasan: drop addr check from describe_object_addr
Patch series "kasan: report clean-ups and improvements".

A number of clean-up patches for KASAN reporting code.  Most are
non-functional and only improve readability.

This patch (of 22):

describe_object_addr() used to be called with NULL addr in the early days
of KASAN.  This no longer happens, so drop the check.

Link: https://lkml.kernel.org/r/cover.1646237226.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/761f8e5a6ee040d665934d916a90afe9f322f745.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:48 -07:00
Andrey Konovalov
c056a364e9 kasan: print virtual mapping info in reports
Print virtual mapping range and its creator in reports affecting virtual
mappings.

Also get physical page pointer for such mappings, so page information gets
printed as well.

Link: https://lkml.kernel.org/r/6ebb11210ae21253198e264d4bb0752c1fad67d7.1645548178.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:48 -07:00
Peter Collingbourne
2dfd1bd992 kasan: update function name in comments
The function kasan_global_oob was renamed to kasan_global_oob_right, but
the comments referring to it were not updated.  Do so.

Link: https://linux-review.googlesource.com/id/I20faa90126937bbee77d9d44709556c3dd4b40be
Link: https://lkml.kernel.org/r/20220219012433.890941-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:48 -07:00
tangmeng
09eb911d93 mm/kasan: remove unnecessary CONFIG_KASAN option
In mm/Makefile has:

  obj-$(CONFIG_KASAN)     += kasan/

So that we don't need 'obj-$(CONFIG_KASAN) :=' in mm/kasan/Makefile,
delete it from mm/kasan/Makefile.

Link: https://lkml.kernel.org/r/20220221065421.20689-1-tangmeng@uniontech.com
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:48 -07:00
Andrey Konovalov
ed6d74446c kasan: test: support async (again) and asymm modes for HW_TAGS
Async mode support has already been implemented in commit e80a76aa1a
("kasan, arm64: tests supports for HW_TAGS async mode") but then got
accidentally broken in commit 99734b535d ("kasan: detect false-positives
in tests").

Restore the changes removed by the latter patch and adapt them for asymm
mode: add a sync_fault flag to kunit_kasan_expectation that only get set
if the MTE fault was synchronous, and reenable MTE on such faults in
tests.

Also rename kunit_kasan_expectation to kunit_kasan_status and move its
definition to mm/kasan/kasan.h from include/linux/kasan.h, as this
structure is only internally used by KASAN.  Also put the structure
definition under IS_ENABLED(CONFIG_KUNIT).

Link: https://lkml.kernel.org/r/133970562ccacc93ba19d754012c562351d4a8c8.1645033139.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:48 -07:00
Andrey Konovalov
1a2473f0cb kasan: improve vmalloc tests
Update the existing vmalloc_oob() test to account for the specifics of the
tag-based modes.  Also add a few new checks and comments.

Add new vmalloc-related tests:

 - vmalloc_helpers_tags() to check that exported vmalloc helpers can
   handle tagged pointers.

 - vmap_tags() to check that SW_TAGS mode properly tags vmap() mappings.

 - vm_map_ram_tags() to check that SW_TAGS mode properly tags
   vm_map_ram() mappings.

 - vmalloc_percpu() to check that SW_TAGS mode tags regions allocated
   for __alloc_percpu(). The tagging of per-cpu mappings is best-effort;
   proper tagging is tracked in [1].

[1] https://bugzilla.kernel.org/show_bug.cgi?id=215019

[sfr@canb.auug.org.au: similar to "kasan: test: fix compatibility with FORTIFY_SOURCE"]
  Link: https://lkml.kernel.org/r/20220128144801.73f5ced0@canb.auug.org.au
  Link: https://lkml.kernel.org/r/865c91ba49b90623ab50c7526b79ccb955f544f0.1644950160.git.andreyknvl@google.com
[andreyknvl@google.com: set_memory_rw/ro() are not exported to modules]
  Link: https://lkml.kernel.org/r/019ac41602e0c4a7dfe96dc8158a95097c2b2ebd.1645554036.git.andreyknvl@google.com
[akpm@linux-foundation.org: fix build]

Cc: Andrey Konovalov <andreyknvl@gmail.com>
[andreyknvl@google.com: vmap_tags() and vm_map_ram_tags() pass invalid page array size]
Link: https://lkml.kernel.org/r/bbdc1c0501c5275e7f26fdb8e2a7b14a40a9f36b.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:48 -07:00
Andrey Konovalov
8479d7b5be kasan: documentation updates
Update KASAN documentation:

 - Bump Clang version requirement for HW_TAGS as ARM64_MTE depends on
   AS_HAS_LSE_ATOMICS as of commit 2decad92f4 ("arm64: mte: Ensure
   TIF_MTE_ASYNC_FAULT is set atomically"), which requires Clang 12.

 - Add description of the new kasan.vmalloc command line flag.

 - Mention that SW_TAGS and HW_TAGS modes now support vmalloc tagging.

 - Explicitly say that the "Shadow memory" section is only applicable to
   software KASAN modes.

 - Mention that shadow-based KASAN_VMALLOC is supported on arm64.

Link: https://lkml.kernel.org/r/a61189128fa3f9fbcfd9884ff653d401864b8e74.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:48 -07:00
Andrey Konovalov
f6f37d9320 arm64: select KASAN_VMALLOC for SW/HW_TAGS modes
Generic KASAN already selects KASAN_VMALLOC to allow VMAP_STACK to be
selected unconditionally, see commit acc3042d62 ("arm64: Kconfig:
select KASAN_VMALLOC if KANSAN_GENERIC is enabled").

The same change is needed for SW_TAGS KASAN.

HW_TAGS KASAN does not require enabling KASAN_VMALLOC for VMAP_STACK, they
already work together as is.  Still, selecting KASAN_VMALLOC still makes
sense to make vmalloc() always protected.  In case any bugs in KASAN's
vmalloc() support are discovered, the command line kasan.vmalloc flag can
be used to disable vmalloc() checking.

Select KASAN_VMALLOC for all KASAN modes for arm64.

Link: https://lkml.kernel.org/r/99d6b3ebf57fc1930ff71f9a4a71eea19881b270.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24 19:06:48 -07:00