Add a utility 'lsdexcr' to print the current DEXCR status. Useful for
quickly checking the status such as when debugging test failures or
verifying the new default DEXCR does what you want (for userspace at
least). Example output:
# ./lsdexcr
uDEXCR: 04000000 (NPHIE)
HDEXCR: 00000000
Effective: 04000000 (NPHIE)
SBHE (0): clear (Speculative branch hint enable)
IBRTPD (3): clear (Indirect branch recurrent target ...)
SRAPD (4): clear (Subroutine return address ...)
NPHIE * (5): set (Non-privileged hash instruction enable)
PHIE (6): clear (Privileged hash instruction enable)
DEXCR[NPHIE] enabled: hashst/hashchk working
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-12-bgray@linux.ibm.com
Test the kernel DEXCR[NPHIE] interface and hashchk exception handling.
Introduces with it a DEXCR utils library for common DEXCR operations.
Volatile is used to prevent the compiler optimising away the signal
tests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-11-bgray@linux.ibm.com
Adds _MSG assertion variants to provide more context behind why a
failure occurred. Also include unistd.h for _exit() and stdio.h for
fprintf(), and move ARRAY_SIZE macro to utils.h.
The _MSG variants and ARRAY_SIZE will be used by the following
DEXCR selftests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-10-bgray@linux.ibm.com
Reducing the time taken by dscr_sysfs_test.c allows restoring the
default timeout, which was removed in
commit 850507f30c ("selftests/powerpc: Turn off timeout setting for
benchmarks, dscr, signal, tm") because that test took too long.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-8-bgray@linux.ibm.com
This test case is extremely slow, taking around a minute compared to
most of the other DSCR tests taking a second at most. Perf shows most
time is spent by the kernel switching to each CPU it reads in
/sys/devices/system/cpu. This switching is an unavoidable consequnce
of reading all the .../cpuN/dscr values.
Remove the outer iteration loop from this test case, reducing the reads
from 1600 to 16. This still updates the DSCR 16 times and verifies on
every CPU each time, so I do not expect the lower coverage to be
meaningful. The speedup is significant: back down to ~1 second like the
other tests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-7-bgray@linux.ibm.com
The tests currently have a single writer thread updating the system
DSCR with a 1/1000 chance looped only 100 times. So only around one in
10 runs actually do anything.
* Add multiple threads to the dscr_explicit_random_test case.
* Use a barrier to make all the threads start work as simultaneously as
possible.
* Use a rwlock and make all threads have a reasonable chance to write to
the DSCR on each iteration.
PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP is used to prevent
writers from starving while all the other threads keep reading.
Logging the reads/writes shows a decent mix across the whole test.
* Allow all threads a chance to write.
* Make the chance of writing more likely.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-6-bgray@linux.ibm.com
Add new cases to the relevant tests that use explicitly synchronized
threads to test the behaviour across context switches with less
randomness. By locking the participants to the same CPU we guarantee a
context switch occurs each time they make progress, which is a likely
failure point if the kernel is not tracking the thread local DSCR
correctly.
The random case is left in to keep exercising potential edge cases.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-5-bgray@linux.ibm.com
All current users of bind_to_cpu() don't care _which_ CPU they get, just
that they are bound to a single free one. So alter the interface to
1. Accept a BIND_CPU_ANY value that tells it to automatically
pick a CPU
2. Return the picked CPU
And convert all these users to bind_to_cpu(BIND_CPU_ANY).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-4-bgray@linux.ibm.com
This function will be useful in the DSCR test patches later in this
series, so promote it to be shared by all powerpc selftests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-3-bgray@linux.ibm.com
Correct a couple of typos while working on other improvements to the
DSCR tests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-2-bgray@linux.ibm.com
This macro is to be used in assembly where C functions are called.
pcrel addressing mode requires branches to functions with a
localentry value of 1 to have either a trailing nop or @notoc.
This macro permits the latter without changing callers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add dummy definitions to fix selftests build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com
dd logs info to stderr by default. This info is pointless in the
selftests and makes legitimate issues harder to spot.
Pass the option to silence the info logs. Actual errors would still be
printed.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-4-bgray@linux.ibm.com
Make supports passing the 'jobserver' (parallel make support) to child
invocations of make when either
1. The target command uses $(MAKE) directly
2. The command starts with '+'
This context is not passed through expansions that result in $(MAKE), so
the macros used in several places fail to pass on the jobserver context.
Warnings are also raised by the child mentioning this.
Prepend macros lines that invoke $(MAKE) with '+' to allow passing the
jobserver context to these children.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-3-bgray@linux.ibm.com
The CLEAN macro was added in 337f1e36 to prevent the
Makefile:50: warning: overriding recipe for target 'clean'
../../lib.mk:124: warning: ignoring old recipe for target 'clean'
style warnings. Expand it's use to fix another case of redefining a
target directly.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-2-bgray@linux.ibm.com
The testcase verifies the setting of different fields in Monitor Mode
Control Register A (MMCRA). In the current code, EV_CODE_EXTRACT macro
is used to extract the "sample" field, which then needs to be further
processed to fetch rand_samp_elig and rand_samp_mode bits. But the
current code is not passing valid sample field to EV_CODE_EXTRACT
macro. Patch addresses this by fixing the input for EV_CODE_EXTRACT.
Fixes: 29cf373c57 ("selftests/powerpc/pmu: Add interface test for mmcra register fields")
Reported-by: David Binderman <dcb314@hotmail.com>
Link: https://lore.kernel.org/r/DB6P189MB0568CF002762C6C43AF6DF169CA89@DB6P189MB0568.EURP189.PROD.OUTLOOK.COM
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230301170918.69176-1-kjain@linux.ibm.com
On the max config P10 machine (1920 threads and 64TB) this test fails
with a timeout:
Sending signals to all threads 10 times...!! killing vmx_signal
!! child died by signal 15
failure: vmx_signal
The default timeout is 120sec so increase this 3x to 360sec. With this
change the test passes on these large machines.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230307213614.2652059-1-mikey@neuling.org
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230127135755.79929-22-mathieu.desnoyers@efficios.com
A couple of tests roll their own auto-allocating file read logic.
Add a generic implementation and convert them to use it.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-6-bgray@linux.ibm.com
Add helper functions to read and write (unsigned) long values directly
from/to files. One of the kernel interfaces uses hex strings, so we need
to allow passing a base too.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-5-bgray@linux.ibm.com
Often a file is expected to hold an integral value. Existing functions
will use a C stdlib function like atoi or strtol to parse the file.
These operations are error prone, with complicated error conditions
(atoi returns 0 if not a number, and is undefined behaviour if not in
range. strtol returns 0 if not a number, and LONG_MIN/MAX if not in
range + sets errno to ERANGE).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-4-bgray@linux.ibm.com
Debugfs files are not always integers, so make *_file return/write a
byte buffer, and *_int deal with int values specifically. This increases
consistency with the other file read/write helpers.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-3-bgray@linux.ibm.com
File read/write is reimplemented in about 5 different ways in the
various PowerPC selftests. This indicates it should be a common util.
Add a common read_file / write_file implementation and convert users
to it where (easily) possible.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-2-bgray@linux.ibm.com
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c90 ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
- malloc() does not zero the buffer,
- fread() does not null-terminate it's output,
- `cat /proc/sys/kernel/core_pattern | hexdump -C` shows the file is
not inherently null-terminated
So using string operations on the buffer is risky. Explicitly add a null
character to the end to make it safer.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041948.58339-3-bgray@linux.ibm.com
No need to write inline asm for mtspr/mfspr, we have macros for this
in reg.h
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041948.58339-2-bgray@linux.ibm.com
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/powerpc`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1669862997-31335-1-git-send-email-yangtiezhu@loongson.cn
The systemwide perf hardware breakpoint test tries to open a perf event
on each cpu. On large systems, we run out of file descriptors and fail
the test. Instead, have the test set the file descriptor limit to an
arbitraty high value.
Reported-by: Rohan Deshpande <rohan_d@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/187fed5843cecc1e5066677b6296ee88337d7bef.1669096083.git.naveen.n.rao@linux.vnet.ibm.com
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type,
ie branch filters are supported. The testcase "bhrb_filter_map_test"
tests the valid and invalid filter maps in different powerpc platforms.
Update this testcase to include scenario to cover multiple branch
filters at sametime. Since powerpc doesn't support multiple filters at
sametime, expect failure during perf_event_open.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921145255.20972-3-atrajeev@linux.vnet.ibm.com
Systems using the hash MMU with a 4K page size don't support 4PB address
space, so skip the test because the bug it tests for can't be triggered.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220901020215.254097-1-mpe@ellerman.id.au
This selftest is designed to cover execute-only protections
on the Radix MMU but will also work with Hash.
The tests are based on those found in pkey_exec_test with modifications
to use the generic mprotect() instead of the pkey variants.
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220817050640.406017-2-ruscur@russell.cc
Some recently added selftests don't have their binaries in .gitignores,
so add them.
I also alphabetically sorted sampling_tests/.gitignore while I was in
there.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220812071632.56095-1-ruscur@russell.cc
GCC 12 thinks that `actual` might be used uninitialised. It's not, the
use is guarded by `bad_mmcr2` which is only set to true at the same
point where `actual` is initialised.
cycles_with_mmcr2_test.c: In function ‘cycles_with_mmcr2’:
cycles_with_mmcr2_test.c:81:17: error: ‘actual’ may be used uninitialized [-Werror=maybe-uninitialized]
81 | printf("Bad MMCR2 value seen is 0x%lx\n", actual);
Silence the warning by initialising `actual` to zero.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220801113746.802046-1-mpe@ellerman.id.au
The ISA states: "when ACC[i] contains defined data, the contents of VSRs
4×i to 4×i+3 are undefined until either a VSX Move From ACC instruction
is used to copy the contents of ACC[i] to VSRs 4×i to 4×i+3 or some other
instruction directly writes to one of these VSRs." We aren't doing this.
This test only works on Power10 because the hardware implementation
happens to map ACC0 to VSRs 0-3, but will fail on any other implementation
that doesn't do this. So add xxmfacc between writing to the accumulator
and accessing the VSRs.
Fixes: 3527e1ab9a ("selftests/powerpc: Add matrix multiply assist (MMA) test")
Signed-off-by: Rashmica Gupta <rashmica@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617043935.428083-1-rashmica@linux.ibm.com
Currently the ptrace-gpr test only tests the GET/SET(FP)REGS ptrace
APIs. But there's an alternate (older) API, called PEEK/POKEUSR.
Add some minimal testing of PEEK/POKEUSR of the FPRs. This is sufficient
to detect the bug that was fixed recently in the 32-bit ptrace FPR
handling.
Depends-on: 8e12784444 ("powerpc/32: Fix overread/overwrite of thread_struct via ptrace")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-13-mpe@ellerman.id.au
The ptrace-gpr test uses fixed values to test that registers can be
read/written via ptrace. In particular it sets all GPRs to 1, which
means the test could miss some types of bugs - eg. if the kernel was
only returning the low word.
So generate some random values at startup and use those instead.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-12-mpe@ellerman.id.au
The ptrace-gpr test includes some inline asm to load GPR and FPR
registers. It then goes back to C to wait for the parent to trace it and
then checks register contents.
The split between inline asm and C is fragile, it relies on the compiler
not using any non-volatile GPRs after the inline asm block. It also
requires a very large and unwieldy inline asm block.
So convert the logic to set registers, wait, and store registers to a
single asm function, meaning there's no window for the compiler to
intervene.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-10-mpe@ellerman.id.au
Some of the ptrace tests check the contents of floating pointer
registers. Currently these use float, which is always 4 bytes, but the
ptrace API supports saving/restoring 8 bytes per register, so switch to
using doubles to exercise the code more fully.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-8-mpe@ellerman.id.au
Thare are some asm helpers for creating/popping stack frames in
basic_asm.h. They always save/restore r2 (TOC pointer), but none of the
selftests change r2, so it's unnecessary to save it by default.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-5-mpe@ellerman.id.au
Thare are some asm helpers for creating/popping stack frames in
basic_asm.h. They always save/restore CR, but none of the selftests
tests touch non-volatile CR fields, so it's unnecessary to save them by
default.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-4-mpe@ellerman.id.au
Currently all ptrace tests are built 64-bit and with TM enabled.
Only the TM tests need TM enabled, so split those out into a separate
variable so that can be specified precisely.
Split the rest of the tests into a variable, and add -m64 to CFLAGS for
those tests, so that in a subsequent patch some tests can be made to
build 32-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-3-mpe@ellerman.id.au
Set LOCAL_HDRS so header changes cause rebuilds. The lib.mk logic adds
all the headers in LOCAL_HDRS as dependencies, so there's no need to
also list them explicitly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627140239.2464900-2-mpe@ellerman.id.au
