Commit graph

348 commits

Author SHA1 Message Date
Linus Torvalds
5e152b4c9e Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits)
  PCI: Don't use dmi_name_in_vendors in quirk
  PCI: remove unused AER functions
  PCI/sysfs: move bus cpuaffinity to class dev_attrs
  PCI: add rescan to /sys/.../pci_bus/.../
  PCI: update bridge resources to get more big ranges when allocating space (again)
  KVM: Use pci_store/load_saved_state() around VM device usage
  PCI: Add interfaces to store and load the device saved state
  PCI: Track the size of each saved capability data area
  PCI/e1000e: Add and use pci_disable_link_state_locked()
  x86/PCI: derive pcibios_last_bus from ACPI MCFG
  PCI: add latency tolerance reporting enable/disable support
  PCI: add OBFF enable/disable support
  PCI: add ID-based ordering enable/disable support
  PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot.
  PCI: Set PCIE maxpayload for card during hotplug insertion
  PCI/ACPI: Report _OSC control mask returned on failure to get control
  x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDs
  PCI: handle positive error codes
  PCI: check pci_vpd_pci22_wait() return
  PCI: Use ICH6_GPIO_EN in ich6_lpc_acpi_gpio
  ...

Fix up trivial conflicts in include/linux/pci_ids.h: commit a6e5e2be44
moved the intel SMBUS ID definitons to the i2c-i801.c driver.
2011-05-23 15:39:34 -07:00
OGAWA Hirofumi
85722cda30 KVM: Fix kvm mmu_notifier initialization order
Like the following, mmu_notifier can be called after registering
immediately. So, kvm have to initialize kvm->mmu_lock before it.

BUG: spinlock bad magic on CPU#0, kswapd0/342
 lock: ffff8800af8c4000, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
Pid: 342, comm: kswapd0 Not tainted 2.6.39-rc5+ #1
Call Trace:
 [<ffffffff8118ce61>] spin_bug+0x9c/0xa3
 [<ffffffff8118ce91>] do_raw_spin_lock+0x29/0x13c
 [<ffffffff81024923>] ? flush_tlb_others_ipi+0xaf/0xfd
 [<ffffffff812e22f3>] _raw_spin_lock+0x9/0xb
 [<ffffffffa0582325>] kvm_mmu_notifier_clear_flush_young+0x2c/0x66 [kvm]
 [<ffffffff810d3ff3>] __mmu_notifier_clear_flush_young+0x2b/0x57
 [<ffffffff810c8761>] page_referenced_one+0x88/0xea
 [<ffffffff810c89bf>] page_referenced+0x1fc/0x256
 [<ffffffff810b2771>] shrink_page_list+0x187/0x53a
 [<ffffffff810b2ed7>] shrink_inactive_list+0x1e0/0x33d
 [<ffffffff810acf95>] ? determine_dirtyable_memory+0x15/0x27
 [<ffffffff812e90ee>] ? call_function_single_interrupt+0xe/0x20
 [<ffffffff810b3356>] shrink_zone+0x322/0x3de
 [<ffffffff810a9587>] ? zone_watermark_ok_safe+0xe2/0xf1
 [<ffffffff810b3928>] kswapd+0x516/0x818
 [<ffffffff810b3412>] ? shrink_zone+0x3de/0x3de
 [<ffffffff81053d17>] kthread+0x7d/0x85
 [<ffffffff812e9394>] kernel_thread_helper+0x4/0x10
 [<ffffffff81053c9a>] ? __init_kthread_worker+0x37/0x37
 [<ffffffff812e9390>] ? gs_change+0xb/0xb

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-22 08:48:12 -04:00
Takuya Yoshikawa
fa3d315a4c KVM: Validate userspace_addr of memslot when registered
This way, we can avoid checking the user space address many times when
we read the guest memory.

Although we can do the same for write if we check which slots are
writable, we do not care write now: reading the guest memory happens
more often than writing.

[avi: change VERIFY_READ to VERIFY_WRITE]

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-22 08:47:56 -04:00
Liu Yuan
a38f84ca8c KVM: ioapic: Fix an error field reference
Function ioapic_debug() in the ioapic_deliver() misnames
one filed by reference. This patch correct it.

Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-22 08:39:27 -04:00
Alex Williamson
f8fcfd7755 KVM: Use pci_store/load_saved_state() around VM device usage
Store the device saved state so that we can reload the device back
to the original state when it's unassigned.  This has the benefit
that the state survives across pci_reset_function() calls via
the PCI sysfs reset interface while the VM is using the device.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-21 12:17:10 -07:00
Xiao Guangrong
0ee8dcb87e KVM: cleanup memslot_id function
We can get memslot id from memslot->id directly

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:53 -04:00
Linus Torvalds
7bc30c23c8 Merge branch 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: move and fix substitue search for missing CPUID entries
  KVM: fix XSAVE bit scanning
  KVM: Enable async page fault processing
  KVM: fix crash on irqfd deassign
2011-04-07 11:33:04 -07:00
Gleb Natapov
0857b9e95c KVM: Enable async page fault processing
If asynchronous hva_to_pfn() is requested call GUP with FOLL_NOWAIT to
avoid sleeping on IO. Check for hwpoison is done at the same time,
otherwise check_user_page_hwpoison() will call GUP again and will put
vcpu to sleep.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-06 13:15:55 +03:00
Michael S. Tsirkin
9e02fb9633 KVM: fix crash on irqfd deassign
irqfd in kvm used flush_work incorrectly: it assumed that work scheduled
previously can't run after flush_work, but since kvm uses a non-reentrant
workqueue (by means of schedule_work) we need flush_work_sync to get that
guarantee.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Jean-Philippe Menil <jean-philippe.menil@univ-nantes.fr>
Tested-by: Jean-Philippe Menil <jean-philippe.menil@univ-nantes.fr>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-06 13:15:55 +03:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds
16c29dafcc Merge branch 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Introduce ARCH_NO_SYSDEV_OPS config option (v2)
  cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)
  KVM: Use syscore_ops instead of sysdev class and sysdev
  PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
  timekeeping: Use syscore_ops instead of sysdev class and sysdev
  x86: Use syscore_ops instead of sysdev classes and sysdevs
2011-03-25 21:07:59 -07:00
Akinobu Mita
cd7e48c5de kvm: use little-endian bitops
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h.  This converts ext2 non-atomic bit operations to
little-endian bit operations.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:16 -07:00
Akinobu Mita
5140a357ea kvm: stop including asm-generic/bitops/le.h directly
asm-generic/bitops/le.h is only intended to be included directly from
asm-generic/bitops/ext2-non-atomic.h or asm-generic/bitops/minix-le.h
which implements generic ext2 or minix bit operations.

This stops including asm-generic/bitops/le.h directly and use ext2
non-atomic bit operations instead.

It seems odd to use ext2_set_bit() on kvm, but it will replaced with
__set_bit_le() after introducing little endian bit operations for all
architectures.  This indirect step is necessary to maintain bisectability
for some architectures which have their own little-endian bit operations.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:10 -07:00
Rafael J. Wysocki
fb3600cc50 KVM: Use syscore_ops instead of sysdev class and sysdev
KVM uses a sysdev class and a sysdev for executing kvm_suspend()
after interrupts have been turned off on the boot CPU (during system
suspend) and for executing kvm_resume() before turning on interrupts
on the boot CPU (during system resume).  However, since both of these
functions ignore their arguments, the entire mechanism may be
replaced with a struct syscore_ops object which is simpler.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Avi Kivity <avi@redhat.com>
2011-03-23 22:16:23 +01:00
Michael S. Tsirkin
c8ce057eaf KVM: improve comment on rcu use in irqfd_deassign
The RCU use in kvm_irqfd_deassign is tricky: we have rcu_assign_pointer
but no synchronize_rcu: synchronize_rcu is done by kvm_irq_routing_update
which we share a spinlock with.

Fix up a comment in an attempt to make this clearer.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:33 -03:00
Jan Kiszka
e935b8372c KVM: Convert kvm_lock to raw_spinlock
Code under this lock requires non-preemptibility. Ensure this also over
-rt by converting it to raw spinlock.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:30 -03:00
Rik van Riel
217ece6129 KVM: use yield_to instead of sleep in kvm_vcpu_on_spin
Instead of sleeping in kvm_vcpu_on_spin, which can cause gigantic
slowdowns of certain workloads, we instead use yield_to to get
another VCPU in the same KVM guest to run sooner.

This seems to give a 10-15% speedup in certain workloads.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:29 -03:00
Rik van Riel
34bb10b79d KVM: keep track of which task is running a KVM vcpu
Keep track of which task is running a KVM vcpu.  This helps us
figure out later what task to wake up if we want to boost a
vcpu that got preempted.

Unfortunately there are no guarantees that the same task
always keeps the same vcpu, so we can only track the task
across a single "run" of the vcpu.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:29 -03:00
Huang Ying
fafc3dbaac KVM: Replace is_hwpoison_address with __get_user_pages
is_hwpoison_address only checks whether the page table entry is
hwpoisoned, regardless the memory page mapped.  While __get_user_pages
will check both.

QEMU will clear the poisoned page table entry (via unmap/map) to make
it possible to allocate a new memory page for the virtual address
across guest rebooting.  But it is also possible that the underlying
memory page is kept poisoned even after the corresponding page table
entry is cleared, that is, a new memory page can not be allocated.
__get_user_pages can catch these situations.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-17 13:08:27 -03:00
Xiao Guangrong
3cba41307a KVM: make make_all_cpus_request() lockless
Now, we have 'vcpu->mode' to judge whether need to send ipi to other
cpus, this way is very exact, so checking request bit is needless,
then we can drop the spinlock let it's collateral

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:26 -03:00
Xiao Guangrong
6b7e2d0991 KVM: Add "exiting guest mode" state
Currently we keep track of only two states: guest mode and host
mode.  This patch adds an "exiting guest mode" state that tells
us that an IPI will happen soon, so unless we need to wait for the
IPI, we can avoid it completely.

Also
1: No need atomically to read/write ->mode in vcpu's thread

2: reorganize struct kvm_vcpu to make ->mode and ->requests
   in the same cache line explicitly

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:26 -03:00
Heiko Carstens
d48ead8b0b KVM: fix build warning within __kvm_set_memory_region() on s390
Get rid of this warning:

  CC      arch/s390/kvm/../../../virt/kvm/kvm_main.o
arch/s390/kvm/../../../virt/kvm/kvm_main.c:596:12: warning: 'kvm_create_dirty_bitmap' defined but not used

The only caller of the function is within a !CONFIG_S390 section, so add the
same ifdef around kvm_create_dirty_bitmap() as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-17 13:08:26 -03:00
Avi Kivity
8234b22e1c KVM: MMU: Don't flush shadow when enabling dirty tracking
Instead, drop large mappings, which were the reason we dropped shadow.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-17 13:08:24 -03:00
Andrea Arcangeli
22e5c47ee2 thp: add compound_trans_head() helper
Cleanup some code with common compound_trans_head helper.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:48 -08:00
Andrea Arcangeli
8ee53820ed thp: mmu_notifier_test_young
For GRU and EPT, we need gup-fast to set referenced bit too (this is why
it's correct to return 0 when shadow_access_mask is zero, it requires
gup-fast to set the referenced bit).  qemu-kvm access already sets the
young bit in the pte if it isn't zero-copy, if it's zero copy or a shadow
paging EPT minor fault we relay on gup-fast to signal the page is in
use...

We also need to check the young bits on the secondary pagetables for NPT
and not nested shadow mmu as the data may never get accessed again by the
primary pte.

Without this closer accuracy, we'd have to remove the heuristic that
avoids collapsing hugepages in hugepage virtual regions that have not even
a single subpage in use.

->test_young is full backwards compatible with GRU and other usages that
don't have young bits in pagetables set by the hardware and that should
nuke the secondary mmu mappings when ->clear_flush_young runs just like
EPT does.

Removing the heuristic that checks the young bit in
khugepaged/collapse_huge_page completely isn't so bad either probably but
I thought it was worth it and this makes it reliable.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:46 -08:00
Andrea Arcangeli
936a5fe6e6 thp: kvm mmu transparent hugepage support
This should work for both hugetlbfs and transparent hugepages.

[akpm@linux-foundation.org: bring forward PageTransCompound() addition for bisectability]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:41 -08:00
Avi Kivity
b7c4145ba2 KVM: Don't spin on virt instruction faults during reboot
Since vmx blocks INIT signals, we disable virtualization extensions during
reboot.  This leads to virtualization instructions faulting; we trap these
faults and spin while the reboot continues.

Unfortunately spinning on a non-preemptible kernel may block a task that
reboot depends on; this causes the reboot to hang.

Fix by skipping over the instruction and hoping for the best.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:18 +02:00
Xiao Guangrong
a4ee1ca4a3 KVM: MMU: delay flush all tlbs on sync_page path
Quote from Avi:
| I don't think we need to flush immediately; set a "tlb dirty" bit somewhere
| that is cleareded when we flush the tlb.  kvm_mmu_notifier_invalidate_page()
| can consult the bit and force a flush if set.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:51 +02:00
Michael S. Tsirkin
bd2b53b20f KVM: fast-path msi injection with irqfd
Store irq routing table pointer in the irqfd object,
and use that to inject MSI directly without bouncing out to
a kernel thread.

While we touch this structure, rearrange irqfd fields to make fastpath
better packed for better cache utilization.

This also adds some comments about locking rules and rcu usage in code.

Some notes on the design:
- Use pointer into the rt instead of copying an entry,
  to make it possible to use rcu, thus side-stepping
  locking complexities.  We also save some memory this way.
- Old workqueue code is still used for level irqs.
  I don't think we DTRT with level anyway, however,
  it seems easier to keep the code around as
  it has been thought through and debugged, and fix level later than
  rip out and re-instate it later.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:29:38 +02:00
Takuya Yoshikawa
75b7127c38 KVM: rename hardware_[dis|en]able() to *_nolock() and add locking wrappers
The naming convension of hardware_[dis|en]able family is little bit confusing
because only hardware_[dis|en]able_all are using _nolock suffix.

Renaming current hardware_[dis|en]able() to *_nolock() and using
hardware_[dis|en]able() as wrapper functions which take kvm_lock for them
reduces extra confusion.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:29 +02:00
Takuya Yoshikawa
97e91e28fa KVM: take kvm_lock for hardware_disable() during cpu hotplug
In kvm_cpu_hotplug(), only CPU_STARTING case is protected by kvm_lock.
This patch adds missing protection for CPU_DYING case.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:28 +02:00
Jan Kiszka
51de271d44 KVM: Clean up kvm_vm_ioctl_assigned_device
Any arch not supporting device assigment will also not build
assigned-dev.c. So testing for KVM_CAP_DEVICE_DEASSIGNMENT is pointless.
KVM_CAP_ASSIGN_DEV_IRQ is unconditinally set. Moreover, add a default
case for dispatching the ioctl.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:24 +02:00
Jan Kiszka
ed78661f26 KVM: Save/restore state of assigned PCI device
The guest may change states that pci_reset_function does not touch. So
we better save/restore the assigned device across guest usage.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:22 +02:00
Jan Kiszka
1e001d49f9 KVM: Refactor IRQ names of assigned devices
Cosmetic change, but it helps to correlate IRQs with PCI devices.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:21 +02:00
Jan Kiszka
0645211c43 KVM: Switch assigned device IRQ forwarding to threaded handler
This improves the IRQ forwarding for assigned devices: By using the
kernel's threaded IRQ scheme, we can get rid of the latency-prone work
queue and simplify the code in the same run.

Moreover, we no longer have to hold assigned_dev_lock while raising the
guest IRQ, which can be a lenghty operation as we may have to iterate
over all VCPUs. The lock is now only used for synchronizing masking vs.
unmasking of INTx-type IRQs, thus is renames to intx_lock.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:20 +02:00
Jan Kiszka
0c106b5aaa KVM: Clear assigned guest IRQ on release
When we deassign a guest IRQ, clear the potentially asserted guest line.
There might be no chance for the guest to do this, specifically if we
switch from INTx to MSI mode.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:19 +02:00
Jan Kiszka
d89f5eff70 KVM: Clean up vm creation and release
IA64 support forces us to abstract the allocation of the kvm structure.
But instead of mixing this up with arch-specific initialization and
doing the same on destruction, split both steps. This allows to move
generic destruction calls into generic code.

It also fixes error clean-up on failures of kvm_create_vm for IA64.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:29:09 +02:00
Jan Kiszka
57e7fbee1d KVM: Refactor srcu struct release on early errors
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:29:05 +02:00
Xiao Guangrong
64f638c7c4 KVM: fix the race while wakeup all pv guest
In kvm_async_pf_wakeup_all(), we add a dummy apf to vcpu->async_pf.done
without holding vcpu->async_pf.lock, it will break if we are handling apfs
at this time.

Also use 'list_empty_careful()' instead of 'list_empty()'

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:03 +02:00
Xiao Guangrong
15096ffcea KVM: handle more completed apfs if possible
If it's no need to inject async #PF to PV guest we can handle
more completed apfs at one time, so we can retry guest #PF
as early as possible

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:01 +02:00
Takuya Yoshikawa
2653503769 KVM: replace vmalloc and memset with vzalloc
Let's use newly introduced vzalloc().

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:55 +02:00
Heiko Carstens
aac8763697 KVM: get rid of warning within kvm_dev_ioctl_create_vm
Fixes this:

  CC      arch/s390/kvm/../../../virt/kvm/kvm_main.o
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_dev_ioctl_create_vm':
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1828:10: warning: unused variable 'r'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:50 +02:00
Heiko Carstens
3bcc8a8c6c KVM: add cast within kvm_clear_guest_page to fix warning
Fixes this:

  CC      arch/s390/kvm/../../../virt/kvm/kvm_main.o
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_clear_guest_page':
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1224:2: warning: passing argument 3 of 'kvm_write_guest_page' makes pointer from integer without a cast
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1185:5: note: expected 'const void *' but argument is of type 'long unsigned int'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:49 +02:00
Takuya Yoshikawa
6f9e5c1702 KVM: use kmalloc() for small dirty bitmaps
Currently we are using vmalloc() for all dirty bitmaps even if
they are small enough, say less than K bytes.

We use kmalloc() if dirty bitmap size is less than or equal to
PAGE_SIZE so that we can avoid vmalloc area usage for VGA.

This will also make the logging start/stop faster.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:48 +02:00
Takuya Yoshikawa
515a01279a KVM: pre-allocate one more dirty bitmap to avoid vmalloc()
Currently x86's kvm_vm_ioctl_get_dirty_log() needs to allocate a bitmap by
vmalloc() which will be used in the next logging and this has been causing
bad effect to VGA and live-migration: vmalloc() consumes extra systime,
triggers tlb flush, etc.

This patch resolves this issue by pre-allocating one more bitmap and switching
between two bitmaps during dirty logging.

Performance improvement:
  I measured performance for the case of VGA update by trace-cmd.
  The result was 1.5 times faster than the original one.

  In the case of live migration, the improvement ratio depends on the workload
  and the guest memory size. In general, the larger the memory size is the more
  benefits we get.

Note:
  This does not change other architectures's logic but the allocation size
  becomes twice. This will increase the actual memory consumption only when
  the new size changes the number of pages allocated by vmalloc().

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:46 +02:00
Takuya Yoshikawa
a36a57b1a1 KVM: introduce wrapper functions for creating/destroying dirty bitmaps
This makes it easy to change the way of allocating/freeing dirty bitmaps.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:45 +02:00
Gleb Natapov
64be500706 KVM: x86: trace "exit to userspace" event
Add tracepoint for userspace exit.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:44 +02:00
Marcelo Tosatti
612819c3c6 KVM: propagate fault r/w information to gup(), allow read-only memory
As suggested by Andrea, pass r/w error code to gup(), upgrading read fault
to writable if host pte allows it.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:28:40 +02:00
Gleb Natapov
8030089f9e KVM: improve hva_to_pfn() readability
Improve vma handling code readability in hva_to_pfn() and fix
async pf handling code to properly check vma returned by find_vma().

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:23 +02:00
Gleb Natapov
7c90705bf2 KVM: Inject asynchronous page fault into a PV guest if page is swapped out.
Send async page fault to a PV guest if it accesses swapped out memory.
Guest will choose another task to run upon receiving the fault.

Allow async page fault injection only when guest is in user mode since
otherwise guest may be in non-sleepable context and will not be able
to reschedule.

Vcpu will be halted if guest will fault on the same page again or if
vcpu executes kernel code.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:17 +02:00