Commit graph

240 commits

Author SHA1 Message Date
Vinod Koul
135ab7f53c Merge branch 'topic/sprd' into for-linus
Kconfig and Makefile conflicts so put them in right order (sprd ones after
stm ones)

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-14 10:36:09 +05:30
Vinod Koul
9c60271336 Merge branch 'topic/stm' into for-linus 2017-11-14 10:34:56 +05:30
Baolin Wang
9b3b8171f7 dmaengine: sprd: Add Spreadtrum DMA driver
This patch adds the DMA controller driver for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-24 20:07:55 +05:30
Anup Patel
7076a1e4a4 dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs
By default, we build Broadcom SBA RAID driver as loadable module for
iProc SOCs so that kernel image is little smaller and we load SBA RAID
driver only when required.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-23 11:35:47 +05:30
Arnd Bergmann
ea62e2ccbb dmaengine: stm32_mdma: add CONFIG_OF dependency
Without CONFIG_OF we get a build warning:

warning: (STM32_MDMA) selects DMA_OF which has unmet direct dependencies (DMADEVICES && OF)

This adds a dependency on CONFIG_OF. Since this means
we no longer need to select 'DMA_OF', I'm dropping that line
as well.

Fixes: a4ffb13c89 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-12 19:33:55 +05:30
Pierre-Yves MORDRET
a4ffb13c89 dmaengine: Add STM32 MDMA driver
This patch adds the driver for the STM32 MDMA controller.

Master Direct memory access (MDMA) is used in order to provide high-speed
data transfer between memory and memory or between peripherals and memory.

MDMA controller provides a master AXI interface for main memory and
peripheral registers access (system access port) and a master AHB
interface only for Cortex-M7 TCM memory access (TCM access port).

MDMA works in conjunction with the standard DMA controllers (DMA1 or DMA2).
It offers up to 64 channels, each dedicated to managing memory access
requests from one of the DMA stream memory buffer or other peripherals
(w/ integrated FIFO).

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-08 14:45:34 +05:30
Pierre-Yves MORDRET
df7e762db5 dmaengine: Add STM32 DMAMUX driver
This patch implements the STM32 DMAMUX driver.

The DMAMUX request multiplexer allows routing a DMA request line between
the peripherals and the DMA controllers of the product. The routing
function is ensured by a programmable multi-channel DMA request line
multiplexer. Each channel selects a unique DMA request line,
unconditionally or synchronously with events from its DMAMUX
synchronization inputs. The DMAMUX may also be used as a DMA request
generator from programmable events on its input trigger signals

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-27 16:01:35 +05:30
Stefan Roese
a85c6f1b29 dmaengine: Add driver for Altera / Intel mSGDMA IP core
This driver adds support for the Altera / Intel modular Scatter-Gather
Direct Memory Access (mSGDMA) intellectual property (IP) to the Linux
DMAengine subsystem. Currently it supports the following op modes:

- DMA_MEMCPY
- DMA_SG
- DMA_SLAVE

This implementation has been tested on an Altera Cyclone FPGA connected
via PCIe, both on an ARM and an x86 platform.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-18 22:04:54 +05:30
Vinod Koul
98cd085ebb Merge branch 'topic/pl08x' into for-linus 2017-07-04 10:05:10 +05:30
Vinod Koul
70ef9af765 Merge branch 'topic/mxs' into for-linus 2017-07-04 10:05:01 +05:30
Fabio Estevam
2446563c74 dmaengine: Kconfig: Simplify the help text for MXS_DMA
Currently the help text for the MXS_DMA option is incomplete as it does
not mention MX6SX, MX6ULL and MX7D, for example.

Instead of extending this list everytime a new SoC comes out, let's
keep the text more generic.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-17 18:32:05 +05:30
Fabio Estevam
d762e4f356 dmaengine: Kconfig: Extend the dependency for MXS_DMA
Currently it is not possible to select the mxs dma driver when only
mx6sx or mx7 are selected.

Extend the dependency to allow the mxs dma driver to be built whenever
ARCH_MXS or ARCH_MXC is selected.

This has the benefit to avoid having to add new entries in the
MXS_DMA Kconfig everytime a new i.MX SoC shows up and it also makes
it consistent with the other i.MX DMA engines, such as IMX_DMA and
IMX_SDMA.

While at it, also pass COMPILE_TEST for increasing the build coverage.

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-15 09:48:42 +05:30
Linus Walleij
1e1cfc7213 dmaengine: pl08x: Add support for Faraday Technology FTDMAC020
After reading the specs for the Faraday Technology FTDMAC020 found
in the Gemini platform, it becomes pretty evident that this is just
another PL08x derivative, and should be handled like such by simply
extending the existing PL08x driver to handle the quirks in this
hardware.

This patch makes memcpy work and has been tested on the Gemini and
also regression-tested on the Nomadik NHK15 using dmatest with
10 threads per channel without a hinch for hours.

I have not implemented slave DMA in those codepaths, because this
device (Gemini) does not use slave DMA, and it seems like devices
using FTDMAC020 for device DMA have a slightly different register
layout so some real hardware is needed to proceed with this. I
left some FIXME etc in the code for this.

I had to do some refactorings of some helper functions, but I have
not split those into separate patches because these refactorings
do not make much sense without the increased complexity of handling
the FTDMAC020.

The DMA test would hang the platform on me on the Gemini after a
few thousand iterations, however after turning of the caches the
problem immediately disappeared and I could run the DMA engine
with 10 threads pers physical channel for days in a row without
a crash. I think there is no problem with the DMA driver: instead
it is something fishy in the FA526 cache handling code that get
pretty heavily exercised by the DMA engine and we need to go and
fix that instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-24 09:44:32 +05:30
Arnd Bergmann
58d9612510 dmaengine: bcm-sba-raid: fix Kconfig dependencies
The new driver requires both mailbox and raid support for compile
testing:

drivers/dma/built-in.o: In function `sba_remove':
edma.c:(.text+0x4414): undefined reference to `mbox_free_channel'
drivers/dma/built-in.o: In function `sba_issue_pending':
edma.c:(.text+0x46cc): undefined reference to `mbox_send_message'
drivers/dma/built-in.o: In function `sba_probe':
edma.c:(.text+0x4e60): undefined reference to `mbox_request_channel'
edma.c:(.text+0x5038): undefined reference to `mbox_free_channel'
drivers/dma/built-in.o: In function `sba_tx_status':
edma.c:(.text+0x5210): undefined reference to `mbox_client_peek_data'

drivers/dma/built-in.o: In function `sba_prep_dma_pq_req':
edma.c:(.text+0x5784): undefined reference to `raid6_gflog'
edma.c:(.text+0x5798): undefined reference to `raid6_gflog'

This rearranges the Kconfig dependencies accordingly.

Fixes: 743e1c8ffe ("dmaengine: Add Broadcom SBA RAID driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-19 08:50:29 +05:30
Anup Patel
743e1c8ffe dmaengine: Add Broadcom SBA RAID driver
The Broadcom stream buffer accelerator (SBA) provides offloading
capabilities for RAID operations. This SBA offload engine is
accessible via Broadcom SoC specific ring manager.

This patch adds Broadcom SBA RAID driver which provides one
DMA device with RAID capabilities using one or more Broadcom
SoC specific ring manager channels. The SBA RAID driver in its
current shape implements memcpy, xor, and pq operations.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-16 10:01:57 +05:30
Vinod Koul
f23514b101 Merge branch 'topic/cppi' into for-linus 2017-05-04 16:03:05 +05:30
Stefan Roese
58532e6626 dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test
To enable usage of multiple SG buffers via the sg_buffers= module
parameter, lets select DMA_ENGINE_RAID via Kconfig when DMATEST is
configured. Otherwise the dmatest will "BUG" when more than 1
buffer (total of 2 for src + dst) is configured via sg_buffers.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kedareswara rao Appana <appanad@xilinx.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-01 15:50:59 +05:30
Alexandre Bailon
e3fa49acf0 dmaengine: cppi41: Add support of DA8xx to CPPI 4.1
The DA8xx has a CPPI 4.1 DMA controller.
This is add the glue layer required to make it work on DA8xx.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-07 13:42:27 +05:30
Vinod Koul
1ad651154b Merge branch 'topic/zx' into for-linus 2017-02-21 21:14:35 +05:30
Vinod Koul
8a3ec58382 Merge branch 'topic/stm32-dma' into for-linus 2017-02-21 21:14:27 +05:30
Icenowy Zheng
c429ceb1e1 dmaengine: sun6i: allow build on ARM64 platforms (sun50i)
As 64-bit Allwinner H5 SoC has the same DMA engine with H3, the DMA
driver should be allowed to be built for ARM64, in order to make it work on H5.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-02-05 12:48:48 +05:30
M'boumba Cedric Madianga
ddf9bd4089 dmaengine: stm32-dma: Fix typo in Kconfig
As STM32 DMA driver is only used as buit-in driver, it couldn't be used as
module.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Reviewed-by: Ludovic BARRE <ludovic.barre@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:23:17 +05:30
Shawn Guo
253f9f4412 dmaengine: zx: rename zx296702_dma.c to zx_dma.c
ZTE ZX dma driver is not ZX296702 specific.  It works for not only
ZX296702 but also other ZTE ZX family platforms like ZX296718.  Let's
rename the file to reflect that.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-02 10:53:48 +05:30
Linus Torvalds
e3842cbfe0 dmaengine updates for 4.10-rc1
Fairly routine update this time around with all changes specific to drivers.
 
  o New driver for STMicroelectronics FDMA
  o Memory-to-memory transfers on dw dmac
  o Support for slave maps on pl08x devices
  o Bunch of driver fixes to use dma_pool_zalloc
  o Bunch of compile and warning fixes spread across drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYUg7NAAoJEHwUBw8lI4NH5/gP/j81+2RzCUX8PiLQxNUt0Vj+
 tVJEizpWCwN1cnhc8ibZdI1DAwyj+GbN2lghYTjqqEng4yOm3czPzUl99grBrpQl
 t+Qylr9PSpck/paRhd2lgZzG8Nk+B5HJDcxBQbW4pwmbc69YAbqYzt44i4bDpR5K
 u3mBve1Ulng7peP45EZB8BA32ffCpOEAC/9SdkaPokrSv6XxxPEFvzewy+mLtioU
 a0zY0iuHqVGpOTABK65fXO/zkGiZLPXJ1T5vK7Iz8mOwuvtYVif0yktQSrx3BWbc
 9r64W7Si633wWt/C9LkuMMSmQ7nI/PyHk811cDOcxp3SA79JV5SWwdQl+5QPdtoP
 hyToaISfAY0BiNI9ltdscx3MPjlwSp08xXvi46RjSs8E2TXnbHUw+J5mTsxYuocl
 Yi61nlL5ClhCbySf9Q3GFsuAJ3O2Nq9WkCTNRIvJtrMhe3NeqDDTfBZJRD4Bfg1G
 q8RAc5oqGZDtqKHtLfwULr7Ec2Ru0hIZAyN907OwW+4jBR/eBJB1y+nGrNPtTWPT
 OOcvrxe85/+ZNROGCZKr0L8UA/MBBMZtjvMY8RMXjBE4YJbakq7tV+7l5VolKeNH
 G6I/1CC06qVPHrnetM6YejhtnmOQ4F8P1sE0wvpG0QTyHJoFq+aOhHNKJC8F9Eln
 CQM2apvL4BHvS7OHt9XL
 =Pf0d
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "Fairly routine update this time around with all changes specific to
  drivers:

   - New driver for STMicroelectronics FDMA
   - Memory-to-memory transfers on dw dmac
   - Support for slave maps on pl08x devices
   - Bunch of driver fixes to use dma_pool_zalloc
   - Bunch of compile and warning fixes spread across drivers"

[ The ST FDMA driver already came in earlier through the remoteproc tree ]

* tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: sirf-dma: remove unused ‘sdesc’
  dmaengine: pl330: remove unused ‘regs’
  dmaengine: s3c24xx: remove unused ‘cdata’
  dmaengine: stm32-dma: remove unused ‘src_addr’
  dmaengine: stm32-dma: remove unused ‘dst_addr’
  dmaengine: stm32-dma: remove unused ‘sfcr’
  dmaengine: pch_dma: remove unused ‘cookie’
  dmaengine: mic_x100_dma: remove unused ‘data’
  dmaengine: img-mdc: remove unused ‘prev_phys’
  dmaengine: usb-dmac: remove unused ‘uchan’
  dmaengine: ioat: remove unused ‘res’
  dmaengine: ioat: remove unused ‘ioat_dma’
  dmaengine: ioat: remove unused ‘is_raid_device’
  dmaengine: pl330: do not generate unaligned access
  dmaengine: k3dma: move to dma_pool_zalloc
  dmaengine: at_hdmac: move to dma_pool_zalloc
  dmaengine: at_xdmac: don't restore unsaved status
  dmaengine: ioat: set error code on failures
  dmaengine: ioat: set error code on failures
  dmaengine: DW DMAC: add multi-block property to device tree
  ...
2016-12-14 20:42:45 -08:00
Vinod Koul
4625d2a513 Merge branch 'topic/st_fdma' into for-linus 2016-12-14 09:07:07 +05:30
Linus Torvalds
edc57ea92c remoteproc updates for v4.10
Introduces remoteproc "subdevice" support, which allows remoteproc
 driver to associate devices to the "running" state of the remoteproc,
 allowing devices to be probed and removed as the remote processor is
 booted, shut down or recovering from a crash.
 
 Handling of virtio device resources was improved, vring memory is now
 allocated as part of other memory allocation. This ensures that all
 vrings for all virtio devices are allocated before we boot the remote
 processor.
 
 The debugfs mechanism for starting and stopping remoteproc instances was
 replaced with a sysfs interface, also providing a mechanism for
 specifying firmware to use by the instance. This allows user space to
 load and boot use case specific firmware on remote processors.
 
 New drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as
 removal of the unused StE modem loader.
 
 Finally support for crash recovery in the Qualcomm Wirelss subsystem
 (used for WiFi/BT/FM on a number of platforms) and a number of bug fixes
 and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYTzfjAAoJEAsfOT8Nma3Fcs0P/irQd7U3gW14XFnl4ObdCOSO
 WlfG6jYP3fkWYA/ynxmu1FbRsyjP1aCrTRmW7oUGtTjCey8oUj69jo2+nLm0yx1k
 EtaTM+72hc7wULaGCBVvmA+LdQRRmTof9uJEjKvDyC8FAY0Thyvu77qlXQ5BrJkN
 o9xNVPDne/1RZx8vVI/zGEeL5+pNK1LXVy0vtFdG89acimu8yIJWJGS0IabnEWLs
 8US6kpxROwkLefuTD4Rs4ByL6S5+1pHwVM6L/5GxsMawMzOhvzYgRa0SNNh7cNO/
 e5ND7dUTcCt7lMOnpbSfqm2BbVRky6ATsoYrOdnVEH9sYJkQ9pMONadHIlVZFwce
 YVDp0UwEasf2IMtAFlvxDI31C5Wm8lpYOL7eixkkVrI1DJaBj8+Ih38F2IruWl9R
 QeDSFH/8a9l6fyN6RIUuPR8b1eeurl+CDoYWKEN6vzXDSi8GqsElB70xIAN/Umdq
 wdJvJByfitYLKEHenG5+mnQrDTQJ0C2f45hynkTCfJY1Qdl6nsMQi5sZFrE8HpOs
 dXFnpg/YK98wWmjyADEYDziH2y5oMHM6r5uljjcKOJDnzwLsDh8WQqhH4dNPNZBA
 2+b4ouhbJLwYMM3zpem8JvV0rIsXvn3Kc8VNKcWOtHymkn8hLQ6Zexsr+RkbttQL
 Em5DvXL5lPm7wVYHvgP8
 =/1kU
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v4.10' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:

 - introduce remoteproc "subdevice" support, which allows remoteproc
   driver to associate devices to the "running" state of the remoteproc,
   allowing devices to be probed and removed as the remote processor is
   booted, shut down or recovering from a crash.

 - handling of virtio device resources was improved, vring memory is now
   allocated as part of other memory allocation. This ensures that all
   vrings for all virtio devices are allocated before we boot the remote
   processor.

 - the debugfs mechanism for starting and stopping remoteproc instances
   was replaced with a sysfs interface, also providing a mechanism for
   specifying firmware to use by the instance. This allows user space to
   load and boot use case specific firmware on remote processors.

 - new drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as
   removal of the unused StE modem loader.

 - finally support for crash recovery in the Qualcomm Wirelss subsystem
   (used for WiFi/BT/FM on a number of platforms) and a number of bug
   fixes and cleanups

* tag 'rproc-v4.10' of git://github.com/andersson/remoteproc: (49 commits)
  remoteproc: qcom_adsp_pil: select qcom_scm
  remoteproc: Drop wait in __rproc_boot()
  remoteproc/ste: Delete unused driver
  remoteproc: Remove "experimental" warning
  remoteproc: qcom_adsp_pil: select qcom_scm
  dt-binding: soc: qcom: smd: Add label property
  remoteproc: qcom: mdt_loader: add include for sizes
  remoteproc: Update last rproc_put users to rproc_free
  remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE
  remoteproc: wcnss-pil: add QCOM_SMD dependency
  dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'"
  remoteproc: Add support for xo clock
  remoteproc: adsp-pil: fix recursive dependency
  remoteproc: Introduce Qualcomm ADSP PIL
  dt-binding: remoteproc: Introduce ADSP loader binding
  remoteproc: qcom_wcnss: Fix circular module dependency
  remoteproc: Merge table_ptr and cached_table pointers
  remoteproc: Remove custom vdev handler list
  remoteproc: Update max_notifyid as we allocate vrings
  remoteproc: Decouple vdev resources and devices
  ...
2016-12-13 08:49:12 -08:00
Vinod Koul
3d6b3715fb dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'"
This reverts commit 6d066389d5 "(dmaengine:
st_fdma: Revert: Update st_fdma to 'depends on REMOTEPROC')" as the commit
it reverted was fine.

Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-17 15:24:27 +05:30
Vinod Koul
6d066389d5 dmaengine: st_fdma: Revert: Update st_fdma to 'depends on REMOTEPROC'
This reverts commit 184e13969f ("dmaengine:
st_fdma: Update st_fdma to 'depends on REMOTEPROC'") due to objection from
Bjorn.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-14 10:43:58 +05:30
Paul Gortmaker
3ed16793e0 dmaengine: tegra210-adma: convert TEGRA210_ADMA from bool to tristate
This driver currently uses modular infrastructure but is controlled
by a bool Kconfig.

There is a general consensus from the DMA reviewers and maintainers
that "if it can be modular, it should be modular" in order to keep
the bzImage size under control for multi platform kernels.

Build tested only.  Also needed some new pm_clk symbols exported
before this commit is applied to tree in order to avoid modpost
errors like:

  ERROR: "pm_clk_add_clk" [drivers/dma/tegra210-adma.ko] undefined!
  ERROR: "pm_clk_create" [drivers/dma/tegra210-adma.ko] undefined!
  ERROR: "pm_clk_destroy" [drivers/dma/tegra210-adma.ko] undefined!
  ERROR: "pm_clk_suspend" [drivers/dma/tegra210-adma.ko] undefined!
  ERROR: "pm_clk_resume" [drivers/dma/tegra210-adma.ko] undefined!

These were added as exports in the v4.8-rc1 merge window.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: dmaengine@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-14 09:10:39 +05:30
Peter Griffin
184e13969f dmaengine: st_fdma: Update st_fdma to 'depends on REMOTEPROC'.
During randconfig builds you can get the following warning
"warning: (ST_FDMA) selects ST_SLIM_REMOTEPROC which has unmet direct
 dependencies (REMOTEPROC)"

randconfig builds should always build without any warnings so
update fdma to depend on REMOTEPROC so this can not happen.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-03 18:53:25 +05:30
Jérémy Lefaure
d661976106 dmaengine: mmp_tdma: add missing select GENERIC_ALLOCATOR in Kconfig
There are some compilation errors when CONFIG_MMP_TDMA is enabled and
CONFIG_GENERIC_ALLOCATOR is disabled:

drivers/built-in.o: In function `mmp_tdma_prep_dma_cyclic':
mmp_tdma.c:(.text+0x7890e): undefined reference to `gen_pool_dma_alloc'
drivers/built-in.o: In function `mmp_tdma_free_chan_resources':
mmp_tdma.c:(.text+0x78aca): undefined reference to `gen_pool_free'
drivers/built-in.o: In function `mmp_tdma_probe':
mmp_tdma.c:(.text+0x78ea8): undefined reference to `of_gen_pool_get'

This commit fix this problem by selecting GENERIC_ALLOCATOR when
CONFIG_MMP_TDMA is enabled.

Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 20:32:56 +05:30
Peter Griffin
6b4cd727ea dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support
This patch adds support for the Flexible Direct Memory Access (FDMA) core
driver. The FDMA is a slim core CPU with a dedicated firmware.
It is a general purpose DMA controller capable of supporting 16
independent DMA channels. Data moves maybe from memory to memory
or between memory and paced latency critical real time targets and it
is found on al STi based chipsets.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 20:12:06 +05:30
Vinod Koul
850e0448a6 Merge branch 'topic/k3' into for-linus 2016-10-03 09:18:14 +05:30
Peter Ujfalusi
509cf0b814 dmaengine: ti-dma-crossbar: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.
When compile testing eDMA or omap-dma, select also the ti-dma-crossbar so
it is also covered by the compile testing.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-28 08:54:37 +05:30
Peter Ujfalusi
54ff7a2d24 dmaengine: omap-dma: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-28 08:54:36 +05:30
Peter Ujfalusi
c5df3572fa dmaengine: edma: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-28 08:54:36 +05:30
Vinod Koul
4cd169419f dmaengine: tegra-adma: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-27 10:40:58 +05:30
Vinod Koul
4dfc979184 dmaengine: moxart: fix kconfig unmet direct dependencies
We have unmet direct dependencies as DMA_SUN4I selects DMA_OF so remove the
selection

warning: (DMA_SUN4I && MOXART_DMA && STM32_DMA) selects DMA_OF which has
unmet direct dependencies (DMADEVICES && OF)

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:36:41 +05:30
Vinod Koul
f43d9fbe0b dmaengine: sun4i: fix kconfig unmet direct dependencies
We have unmet direct dependencies as DMA_SUN4I selects DMA_OF so remove the
selection

warning: (DMA_SUN4I && MOXART_DMA && STM32_DMA) selects DMA_OF which has
unmet direct dependencies (DMADEVICES && OF)

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:36:40 +05:30
Vinod Koul
854d4bd25b dmaengine: zxdma: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:36:40 +05:30
Vinod Koul
4aa258af65 dmaengine: timb-dma: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:36:39 +05:30
Vinod Koul
1609db6f08 dmaengine: s3c24xx: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:32:48 +05:30
Vinod Koul
4fbf3717a4 dmaengine: stm32-dma: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:31:15 +05:30
Vinod Koul
93d05f1ec6 dmaengine: mmp_tdma: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

While at it, to fix build on other archs, select MMP_SRAM only for ARCH_MMP
and also fix the platform header

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:31:04 +05:30
Vinod Koul
cd3a792a77 dmaengine: mmp_pdma: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:30:31 +05:30
Vinod Koul
49ad6d7dd6 dmaengine: ep93xx: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:29:44 +05:30
Vinod Koul
6947c3f287 dmaengine: sa11x0: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:29:31 +05:30
Vinod Koul
6e450376e5 dmaengine: coh901318: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:28:35 +05:30
Vinod Koul
a952b28788 dmaengine: jz4780: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:26:28 +05:30
Vinod Koul
d78d6c073a dmaengine: jz4740: enable COMPILE_TEST
To get more coverage, enable COMPILE_TEST for this driver.

Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26 22:26:18 +05:30