Commit graph

296 commits

Author SHA1 Message Date
Rafael J. Wysocki
e59a8db8d9 PM / Domains: Skip governor functions for CONFIG_PM_RUNTIME unset
The governor functions in drivers/base/power/domain_governor.c
are only used if CONFIG_PM_RUNTIME is set and they refer to data
structures that are only present in that case.  For this reason,
they shouldn't be compiled at all when CONFIG_PM_RUNTIME is not set.

Reported-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-14 00:39:36 +01:00
Rafael J. Wysocki
0f1d6986ba PM / Domains: Fix build for CONFIG_PM_SLEEP unset
Some callback functions defined in drivers/base/power/domain.c are
only necessary if CONFIG_PM_SLEEP is set and they call some other
functions that are only available in that case.  For this reason,
they should not be compiled at all when CONFIG_PM_SLEEP is not set.

Reported-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-14 00:39:25 +01:00
Rafael J. Wysocki
6d10463b2f Merge branch 'pm-domains' into pm-for-linus
* pm-domains:
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  PM / Domains: Provide an always on power domain governor
  PM / Domains: Fix default system suspend/resume operations
  PM / Domains: Make it possible to assign names to generic PM domains
  PM / Domains: fix compilation failure for CONFIG_PM_GENERIC_DOMAINS unset
  PM / Domains: Automatically update overoptimistic latency information
  PM / Domains: Add default power off governor function (v4)
  PM / Domains: Add device stop governor function (v4)
  PM / Domains: Rework system suspend callback routines (v2)
  PM / Domains: Introduce "save/restore state" device callbacks
  PM / Domains: Make it possible to use per-device domain callbacks
2011-12-25 23:43:11 +01:00
Rafael J. Wysocki
0015afaa1f Merge branch 'pm-runtime' into pm-for-linus
* pm-runtime:
  PM / Runtime: Use device PM QoS constraints (v2)
2011-12-25 23:43:05 +01:00
Rafael J. Wysocki
40a5f8be2f PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
Some devices, like the I2C controller on SH7372, are not
necessary for providing power to their children or forwarding
wakeup signals (and generally interrupts) from them.  They are
only needed by their children when there's some data to transfer,
so they may be suspended for the majority of time and resumed
on demand, when the children have data to send or receive.  For this
purpose, however, their power.ignore_children flags have to be set,
or the PM core wouldn't allow them to be suspended while their
children were active.

Unfortunately, in some situations it may take too much time to
resume such devices so that they can assist their children in
transferring data.  For example, if such a device belongs to a PM
domain which goes to the "power off" state when that device is
suspended, it may take too much time to restore power to the
domain in response to the request from one of the device's
children.  In that case, if the parent's resume time is critical,
the domain should stay in the "power on" state, although it still may
be desirable to power manage the parent itself (e.g. by manipulating
its clock).

In general, device PM QoS may be used to address this problem.
Namely, if the device's children added PM QoS latency constraints
for it, they would be able to prevent it from being put into an
overly deep low-power state.  However, in some cases the devices
needing to be serviced are not the immediate children of a
"children-ignoring" device, but its grandchildren or even less
direct descendants.  In those cases, the entity wanting to add a
PM QoS request for a given device's ancestor that ignores its
children will have to find it in the first place, so introduce a new
helper function that may be used to achieve that.  This function,
dev_pm_qos_add_ancestor_request(), will search for the first
ancestor of the given device whose power.ignore_children flag is
set and will add a device PM QoS latency request for that ancestor
on behalf of the caller.  The request added this way may be removed
with the help of dev_pm_qos_remove_request() in the future, like
any other device PM QoS latency request.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-25 23:39:41 +01:00
Rafael J. Wysocki
90363ddf0a PM: Drop generic_subsys_pm_ops
Since the PM core is now going to execute driver callbacks directly
if the corresponding subsystem callbacks are not present,
forward-only subsystem callbacks (i.e. such that only execute the
corresponding driver callbacks) are not necessary any more.  Thus
it is possible to remove generic_subsys_pm_ops, because the only
callback in there that is not forward-only, .runtime_idle, is not
really used by the only user of generic_subsys_pm_ops, which is
vio_bus_type.

However, the generic callback routines themselves cannot be removed
from generic_ops.c, because they are used individually by a number
of subsystems.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-21 22:03:32 +01:00
Rafael J. Wysocki
35cd133c61 PM: Run the driver callback directly if the subsystem one is not there
Make the PM core execute driver PM callbacks directly if the
corresponding subsystem callbacks are not present.

There are three reasons for doing that.  First, it reflects the
behavior of drivers/base/dd.c:really_probe() that runs the driver's
.probe() callback directly if the bus type's one is not defined, so
this change will remove one arbitrary difference between the PM core
and the remaining parts of the driver core.  Second, it will allow
some subsystems, whose PM callbacks don't do anything except for
executing driver callbacks, to be simplified quite a bit by removing
those "forward-only" callbacks.  Finally, it will allow us to remove
one level of indirection in the system suspend and resume code paths
where it is not necessary, which is going to lead to less debug noise
with initcall_debug passed in the kernel command line (messages won't
be printed for driverless devices whose subsystems don't provide
PM callbacks among other things).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-21 22:01:05 +01:00
Rafael J. Wysocki
9cf519d1c1 PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
Make the pm_op() and pm_noirq_op() functions return pointers to
appropriate callbacks instead of executing those callbacks and
returning their results.

This change is required for a subsequent modification that will
execute the corresponding driver callback if the subsystem
callback returned by either pm_op(), or pm_noirq_op() is NULL.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-21 22:00:56 +01:00
Rafael J. Wysocki
1eac8111e0 PM / Sleep: Merge internal functions in generic_ops.c
After the change that removed the code related to runtime PM
from __pm_generic_call() and __pm_generic_resume() these two
functions need not be separate any more, so merge them.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-18 00:27:43 +01:00
Rafael J. Wysocki
8ca6d9bcc8 PM / Sleep: Simplify generic system suspend callbacks
The pm_runtime_suspended() check in __pm_generic_call() doesn't
really help and may cause problems to happen, because in some cases
the system suspend callbacks need to be called even if the given
device has been suspended by runtime PM.  For example, if the device
generally supports remote wakeup and is not enabled to wake up
the system from sleep, it should be prevented from generating wakeup
signals during system suspend and that has to be done by the
suspend callbacks that the pm_runtime_suspended() check prevents from
being executed.

Similarly, it may not be a good idea to unconditionally change
the runtime PM status of the device to 'active' in
__pm_generic_resume(), because the driver may want to leave the
device in the 'suspended' state, depending on what happened to it
before the system suspend and whether or not it is enabled to
wake up the system.

For the above reasons, remove the pm_runtime_suspended()
check from __pm_generic_call() and remove the code changing the
device's runtime PM status from __pm_generic_resume().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-18 00:27:35 +01:00
Mark Brown
925b44a273 PM / Domains: Provide an always on power domain governor
Since systems are likely to have power domains that can't be turned off
for various reasons at least temporarily while implementing power domain
support provide a default governor which will always refuse to power off
the domain, saving platforms having to implement their own.

Since the code is so tiny don't bother with a Kconfig symbol for it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-09 23:22:41 +01:00
Rafael J. Wysocki
c9914854b4 PM / Domains: Fix default system suspend/resume operations
Commit d23b9b00cd (PM / Domains: Rework
system suspend callback routines (v2)) broke the system suspend and
resume handling by devices belonging to generic PM domains, because
it used freeze/thaw callbacks instead of suspend/resume ones and
didn't initialize device callbacks for system suspend/resume
properly at all.  Fix those problems.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-08 22:59:23 +01:00
Rafael J. Wysocki
e84b2c2027 PM / Domains: Make it possible to assign names to generic PM domains
Add a name member pointer to struct generic_pm_domain and use it in
diagnostic messages regarding the domain power-off and power-on
latencies.  Update the ARM shmobile SH7372 code to assign names to
the PM domains used by it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2011-12-06 22:19:54 +01:00
Rafael J. Wysocki
0c6aebe318 PM / Sleep: Unify diagnostic messages from device suspend/resume
Make pm_op() and pm_noirq_op() use the same helper function for
running callbacks, which will cause them to use the same format of
diagnostic messages.  This also reduces the complexity and size of
the code quite a bit.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-06 22:09:45 +01:00
Rafael J. Wysocki
0140d8bd47 PM / Domains: Automatically update overoptimistic latency information
Measure the time of execution of the .stop(), .start(), .save_state()
and .restore_state() PM domain device callbacks and if the result
is greater than the corresponding latency value stored in the
device's struct generic_pm_domain_data object, replace the inaccurate
value with the measured time.

Do analogously for the PM domains' .power_off() and .power_off()
callbacks.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 21:48:07 +01:00
Rafael J. Wysocki
221e9b5838 PM / Domains: Add default power off governor function (v4)
Add a function deciding whether or not a given PM domain should
be powered off on the basis of the PM QoS constraints of devices
belonging to it and their PM QoS timing data.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 21:47:58 +01:00
Rafael J. Wysocki
b02c999ac3 PM / Domains: Add device stop governor function (v4)
Add a function deciding whether or not devices should be stopped in
pm_genpd_runtime_suspend() depending on their PM QoS constraints
and stop/start timing values.  Make it possible to add information
used by this function to device objects.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2011-12-01 21:47:40 +01:00
Rafael J. Wysocki
d23b9b00cd PM / Domains: Rework system suspend callback routines (v2)
The current generic PM domains code attempts to use the generic
system suspend operations along with the domains' device stop/start
routines, which requires device drivers to assume that their
system suspend/resume (and hibernation/restore) callbacks will always
be used with generic PM domains.  However, in theory, the same
hardware may be used in devices that don't belong to any PM domain,
in which case it would be necessary to add "fake" PM domains to
satisfy the above assumption.  Also, the domain the hardware belongs
to may not be handled with the help of the generic code.

To allow device drivers that may be used along with the generic PM
domains code of more flexibility, add new device callbacks,
.suspend(), .suspend_late(), .resume_early(), .resume(), .freeze(),
.freeze_late(), .thaw_early(), and .thaw(), that can be supplied by
the drivers in addition to their "standard" system suspend and
hibernation callbacks.  These new callbacks, if defined, will be used
by the generic PM domains code for the handling of system suspend and
hibernation instead of the "standard" ones.  This will allow drivers
to be designed to work with generic PM domains as well as without
them.

For backwards compatibility, introduce default implementations of the
new callbacks for PM domains that will execute pm_generic_suspend(),
pm_generic_suspend_noirq(), pm_generic_resume_noirq(),
pm_generic_resume(), pm_generic_freeze(), pm_generic_freeze_noirq(),
pm_generic_thaw_noirq(), and pm_generic_thaw(), respectively, for the
given device if its driver doesn't define those callbacks.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 21:47:29 +01:00
Rafael J. Wysocki
ecf00475f2 PM / Domains: Introduce "save/restore state" device callbacks
The current PM domains code uses device drivers' .runtime_suspend()
and .runtime_resume() callbacks as the "save device state" and
"restore device state" operations, which may not be appropriate in
general, because it forces drivers to assume that they always will
be used with generic PM domains.  However, in theory, the same
hardware may be used in devices that don't belong to any PM
domain, in which case it would be necessary to add "fake" PM
domains to satisfy the above assumption.  It also may be located in
a PM domain that's not handled with the help of the generic code.

To allow device drivers that may be used along with the generic PM
domains code of more flexibility, introduce new device callbacks,
.save_state() and .restore_state(), that can be supplied by the
drivers in addition to their "standard" runtime PM callbacks.  This
will allow the drivers to be designed to work with generic PM domains
as well as without them.

For backwards compatibility, introduce default .save_state() and
.restore_state() callback routines for PM domains that will execute
a device driver's .runtime_suspend() and .runtime_resume() callbacks,
respectively, for the given device if the driver doesn't provide its
own implementations of .save_state() and .restore_state().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 21:47:18 +01:00
Rafael J. Wysocki
d5e4cbfe20 PM / Domains: Make it possible to use per-device domain callbacks
The current generic PM domains code requires that the same .stop(),
.start() and .active_wakeup() device callback routines be used for
all devices in the given domain, which is inflexible and may not
cover some specific use cases.  For this reason, make it possible to
use device specific .start()/.stop() and .active_wakeup() callback
routines by adding corresponding callback pointers to struct
generic_pm_domain_data.  Add a new helper routine,
pm_genpd_register_callbacks(), that can be used to populate
the new per-device callback pointers.

Modify the shmobile's power domains code to allow drivers to add
their own code to be run during the device stop and start operations
with the help of the new callback pointers.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2011-12-01 21:47:08 +01:00
Rafael J. Wysocki
00dc9ad18d PM / Runtime: Use device PM QoS constraints (v2)
Make the runtime PM core use device PM QoS constraints to check if
it is allowed to suspend a given device, so that an error code is
returned if the device's own PM QoS constraint is negative or one of
its children has already been suspended for too long.  If this is
not the case, the maximum estimated time the device is allowed to be
suspended, computed as the minimum of the device's PM QoS constraint
and the PM QoS constraints of its children (reduced by the difference
between the current time and their suspend times) is stored in a new
device's PM field power.max_time_suspended_ns that can be used by
the device's subsystem or PM domain to decide whether or not to put
the device into lower-power (and presumably higher-latency) states
later (if the constraint is 0, which means "no constraint", the
power.max_time_suspended_ns is set to -1).

Additionally, the time of execution of the subsystem-level
.runtime_suspend() callback for the device is recorded in the new
power.suspend_time field for later use by the device's subsystem or
PM domain along with power.max_time_suspended_ns (it also is used
by the core code when the device's parent is suspended).

Introduce a new helper function,
pm_runtime_update_max_time_suspended(), allowing subsystems and PM
domains (or device drivers) to update the power.max_time_suspended_ns
field, for example after changing the power state of a suspended
device.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-01 21:46:42 +01:00
Rafael J. Wysocki
64e94aafb6 PM / Sleep: Simplify device_suspend_noirq()
Remove a few if () and return statements in device_suspend_noirq()
that aren't really necessary.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
2011-11-23 21:13:34 +01:00
Rafael J. Wysocki
d74e278aaf PM / Sleep: Remove unnecessary label and jumps to it form PM core code
The "End" label in device_prepare() in drivers/base/power/main.c is
not necessary and the jumps to it have no real effect, so remove them
all.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
2011-11-23 21:13:24 +01:00
Rafael J. Wysocki
8b258cc8ac PM Sleep: Do not extend wakeup paths to devices with ignore_children set
Commit 4ca46ff3e0 (PM / Sleep: Mark
devices involved in wakeup signaling during suspend) introduced
the power.wakeup_path field in struct dev_pm_info to mark devices
whose children are enabled to wake up the system from sleep states,
so that power domains containing the parents that provide their
children with wakeup power and/or relay their wakeup signals are not
turned off.  Unfortunately, that introduced a PM regression on SH7372
whose power consumption in the system "memory sleep" state increased
as a result of it, because it prevented the power domain containing
the I2C controller from being turned off when some children of that
controller were enabled to wake up the system, although the
controller was not necessary for them to signal wakeup.

To fix this issue use the observation that devices whose
power.ignore_children flag is set for runtime PM should be treated
analogously during system suspend.  Namely, they shouldn't be
included in wakeup paths going through their children.  Since the
SH7372 I2C controller's power.ignore_children flag is set, doing so
will restore the previous behavior of that SOC.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17 21:39:33 +01:00
Guennadi Liakhovetski
af4c720efc PM / QoS: Properly use the WARN() macro in dev_pm_qos_add_request()
Make dev_pm_qos_add_request() use WARN() in a better way and do not hardcode
the function's name into the message (use __func__ instead).

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-10 00:44:18 +01:00
Magnus Damm
24050956e0 PM / Clocks: Only disable enabled clocks in pm_clk_suspend()
Refrain from running clk_disable() on clocks that
have not been enabled. A typical case when this can
happen is during Suspend-to-RAM for devices that have
no driver associated with them. In such case the clock
may be in default ACQUIRED state.

Without this patch the sh7372 Mackerel board crashes
in __clk_disable() during Suspend-to-RAM with:
"Trying to disable clock 0xdeadbeef with 0 usecount"
This happens for the CEU device which is added during
boot. The test case has no CEU driver included in the
kernel configuration. Needed for v3.2-rc1.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-10 00:44:10 +01:00
Thomas Meyer
156acb166e PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR())
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))

[The semantic patch that makes this change is available
 in scripts/coccinelle/api/err_cast.cocci.

 More information about semantic patching is available at
 http://coccinelle.lip6.fr/]

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-08 22:34:00 +01:00
Linus Torvalds
32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Alan Stern
886486b792 PM / Runtime: Automatically retry failed autosuspends
Originally, the runtime PM core would send an idle notification
whenever a suspend attempt failed.  The idle callback routine could
then schedule a delayed suspend for some time later.

However this behavior was changed by commit
f71648d73c (PM / Runtime: Remove idle
notification after failing suspend).  No notifications were sent, and
there was no clear mechanism to retry failed suspends.

This caused problems for the usbhid driver, because it fails
autosuspend attempts as long as a key is being held down.  Therefore
this patch (as1492) adds a mechanism for retrying failed
autosuspends.  If the callback routine updates the last_busy field so
that the next autosuspend expiration time is in the future, the
autosuspend will automatically be rescheduled.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Henrik Rydberg <rydberg@euromail.se>
Cc: <stable@kernel.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-04 22:28:14 +01:00
venu byravarasu
def0c0a37d PM / Runtime: Fix runtime accounting calculation error
With delta type being int, its value is made zero
for all values of now > 0x80000000.
Hence fixing it.

Signed-off-by: venu byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-04 22:28:10 +01:00
Paul Gortmaker
aaf195444b drivers/base: change module.h -> export.h in power/common.c
This file isn't using full modular functionality, and hence
can be "downgraded" to just using export.h

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:39 -04:00
Paul Gortmaker
1b6bc32f0a drivers/base: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required.
Most of these files were implicitly getting EXPORT_SYMBOL via
device.h which was including module.h, but that path will be broken
soon.

[ with input from Stephen Rothwell <sfr@canb.auug.org.au> ]

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:38 -04:00
Jonghwan Choi
0ab1e79b82 PM / Clocks: Remove redundant NULL checks before kfree()
Since kfree() checks it its argument is not NULL, it is not necessary
to duplicate this check in __pm_clk_remove().

[rjw: Added the changelog.]

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-22 00:22:54 +02:00
Rafael J. Wysocki
d033e07856 Merge branch 'pm-domains' into pm-for-linus
* pm-domains:
  ARM: mach-shmobile: sh7372 A4R support (v4)
  ARM: mach-shmobile: sh7372 A3SP support (v4)
  PM / Sleep: Mark devices involved in wakeup signaling during suspend
2011-10-22 00:21:52 +02:00
Rafael J. Wysocki
4ca46ff3e0 PM / Sleep: Mark devices involved in wakeup signaling during suspend
The generic PM domains code in drivers/base/power/domain.c has
to avoid powering off domains that provide power to wakeup devices
during system suspend.  Currently, however, this only works for
wakeup devices directly belonging to the given domain and not for
their children (or the children of their children and so on).
Thus, if there's a wakeup device whose parent belongs to a power
domain handled by the generic PM domains code, the domain will be
powered off during system suspend preventing the device from
signaling wakeup.

To address this problem introduce a device flag, power.wakeup_path,
that will be set during system suspend for all wakeup devices,
their parents, the parents of their parents and so on.  This way,
all wakeup paths in the device hierarchy will be marked and the
generic PM domains code will only need to avoid powering off
domains containing devices whose power.wakeup_path is set.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-22 00:19:29 +02:00
Alan Stern
8f88893c05 PM: Update the policy on default wakeup settings
This patch (as1485) documents a change to the kernel's default wakeup
policy.  Devices that forward wakeup requests between buses should be
enabled for wakeup by default.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:28:51 +02:00
ShuoX Liu
2a77c46de1 PM / Suspend: Add statistics debugfs file for suspend to RAM
Record S3 failure time about each reason and the latest two failed
devices' names in S3 progress.
We can check it through 'suspend_stats' entry in debugfs.

The motivation of the patch:

We are enabling power features on Medfield. Comparing with PC/notebook,
a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far
more frequently. If it can't enter suspend-2-ram in time, the power
might be used up soon.

We often find sometimes, a device suspend fails. Then, system retries
s3 over and over again. As display is off, testers and developers
don't know what happens.

Some testers and developers complain they don't know if system
tries suspend-2-ram, and what device fails to suspend. They need
such info for a quick check. The patch adds suspend_stats under
debugfs for users to check suspend to RAM statistics quickly.

If not using this patch, we have other methods to get info about
what device fails. One is to turn on  CONFIG_PM_DEBUG, but users
would get too much info and testers need recompile the system.

In addition, dynamic debug is another good tool to dump debug info.
But it still doesn't match our utilization scenario closely.
1) user need write a user space parser to process the syslog output;
2) Our testing scenario is we leave the mobile for at least hours.
   Then, check its status. No serial console available during the
   testing. One is because console would be suspended, and the other
   is serial console connecting with spi or HSU devices would consume
   power. These devices are powered off at suspend-2-ram.

Signed-off-by: ShuoX Liu <shuox.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:27:45 +02:00
Rafael J. Wysocki
9bd717c0dc Merge branch 'pm-runtime' into pm-for-linus
* pm-runtime:
  PM / Runtime: Handle .runtime_suspend() failure correctly
  PM / Runtime: Fix kerneldoc comment for rpm_suspend()
  PM / Runtime: Update document about callbacks
2011-10-16 23:26:49 +02:00
Ming Lei
857b36c7b0 PM / Runtime: Handle .runtime_suspend() failure correctly
If .runtime_suspend() returns -EAGAIN or -EBUSY, the device should
still be in ACTIVE state, so it is not necessary to send an idle
notification to its parent.  If .runtime_suspend() returns other
fatal failure, it doesn't make sense to send idle notification to
its parent.

Skip parent idle notification when failure is returned from
.runtime_suspend() and update comments in rpm_suspend() to reflect
that change.

[rjw: Modified the subject and changelog slightly.]

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:25:23 +02:00
Ming Lei
47d8f0bac0 PM / Runtime: Fix kerneldoc comment for rpm_suspend()
This patch fix kerneldoc comments for rpm_suspend():

 - 'Cancel a pending idle notification' should be put before, also
   should be changed to 'Cancel a pending idle notification,
   autosuspend or suspend'.

 - idle notification for the device after succeeding suspend has
   been removed, so update the comment accordingly.

[rjw: Modified the subject and changelog slightly.]

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:25:08 +02:00
Rafael J. Wysocki
7811ac276b Merge branch 'pm-devfreq' into pm-for-linus
* pm-devfreq:
  PM / devfreq: Add basic governors
  PM / devfreq: Add common sysfs interfaces
  PM: Introduce devfreq: generic DVFS framework with device-specific OPPs
  PM / OPP: Add OPP availability change notifier.
2011-10-07 23:17:18 +02:00
Rafael J. Wysocki
9696cc9007 Merge branch 'pm-qos' into pm-for-linus
* pm-qos:
  PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks
  PM / QoS: Add function dev_pm_qos_read_value() (v3)
  PM QoS: Add global notification mechanism for device constraints
  PM QoS: Implement per-device PM QoS constraints
  PM QoS: Generalize and export constraints management code
  PM QoS: Reorganize data structs
  PM QoS: Code reorganization
  PM QoS: Minor clean-ups
  PM QoS: Move and rename the implementation files
2011-10-07 23:17:07 +02:00
Rafael J. Wysocki
c28b56b1d4 Merge branch 'pm-domains' into pm-for-linus
* pm-domains:
  PM / Domains: Split device PM domain data into base and need_restore
  ARM: mach-shmobile: sh7372 sleep warning fixes
  ARM: mach-shmobile: sh7372 A3SM support
  ARM: mach-shmobile: sh7372 generic suspend/resume support
  PM / Domains: Preliminary support for devices with power.irq_safe set
  PM: Move clock-related definitions and headers to separate file
  PM / Domains: Use power.sybsys_data to reduce overhead
  PM: Reference counting of power.subsys_data
  PM: Introduce struct pm_subsys_data
  ARM / shmobile: Make A3RV be a subdomain of A4LC on SH7372
  PM / Domains: Rename argument of pm_genpd_add_subdomain()
  PM / Domains: Rename GPD_STATE_WAIT_PARENT to GPD_STATE_WAIT_MASTER
  PM / Domains: Allow generic PM domains to have multiple masters
  PM / Domains: Add "wait for parent" status for generic PM domains
  PM / Domains: Make pm_genpd_poweron() always survive parent removal
  PM / Domains: Do not take parent locks to modify subdomain counters
  PM / Domains: Implement subdomain counters as atomic fields
2011-10-07 23:17:02 +02:00
Rafael J. Wysocki
d727b60659 Merge branch 'pm-runtime' into pm-for-linus
* pm-runtime:
  PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set
  PM / Runtime: Replace dev_dbg() with trace_rpm_*()
  PM / Runtime: Introduce trace points for tracing rpm_* functions
  PM / Runtime: Don't run callbacks under lock for power.irq_safe set
  USB: Add wakeup info to debugging messages
  PM / Runtime: pm_runtime_idle() can be called in atomic context
  PM / Runtime: Add macro to test for runtime PM events
  PM / Runtime: Add might_sleep() to runtime PM functions
2011-10-07 23:16:55 +02:00
Rafael J. Wysocki
1a9a91525d PM / QoS: Add function dev_pm_qos_read_value() (v3)
To read the current PM QoS value for a given device we need to
make sure that the device's power.constraints object won't be
removed while we're doing that.  For this reason, put the
operation under dev->power.lock and acquire the lock
around the initialization and removal of power.constraints.

Moreover, since we're using the value of power.constraints to
determine whether or not the object is present, the
power.constraints_state field isn't necessary any more and may be
removed.  However, dev_pm_qos_add_request() needs to check if the
device is being removed from the system before allocating a new
PM QoS constraints object for it, so make it use the
power.power_state field of struct device for this purpose.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-04 21:54:26 +02:00
MyungJoo Ham
03ca370fbf PM / OPP: Add OPP availability change notifier.
The patch enables to register notifier_block for an OPP-device in order
to get notified for any changes in the availability of OPPs of the
device. For example, if a new OPP is inserted or enable/disable status
of an OPP is changed, the notifier is executed.

This enables the usage of opp_add, opp_enable, and opp_disable to
directly take effect with any connected entities such as cpufreq or
devfreq.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mike Turquette <mturquette@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-30 22:35:12 +02:00
Ming Lei
c3dc2f1462 PM / Runtime: Replace dev_dbg() with trace_rpm_*()
This patch replaces dev_dbg with trace_rpm_* inside
the three important functions:

	rpm_idle
	rpm_suspend
	rpm_resume

Trace points have the below advantages compared with dev_dbg:

	- trace points include much runtime information(such as
	running cpu, current task, ...)

	- most of linux distributions may disable "verbose debug"
	driver debug compile switch, so it is very difficult to
	report/debug runtime pm related problems from distribution
	users without this kind of debug information.

	- for upstream kernel users, enableing the debug switch will
	produce many useless "rpm_resume" output, and it is very noise.

	- dev_dbg inside rpm_suspend/rpm_resume may have some effects
	on runtime pm behaviour of console devicer

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-27 22:54:41 +02:00
Rafael J. Wysocki
ad3c36a534 PM / Runtime: Don't run callbacks under lock for power.irq_safe set
The rpm_suspend() and rpm_resume() routines execute subsystem or PM
domain callbacks under power.lock if power.irq_safe is set for the
given device.  This is inconsistent with that rpm_idle() does after
commit 02b2677 (PM / Runtime: Allow _put_sync() from
interrupts-disabled context) and is problematic for subsystems and PM
domains wanting to use power.lock for synchronization in their
runtime PM callbacks.

This change requires the code checking if the device's runtime PM
status is RPM_SUSPENDING or RPM_RESUMING to be modified too, to take
the power.irq_safe set case into account (that code wasn't reachable
before with power.irq_safe set, because it's executed with the
device's power.lock held).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-27 21:54:52 +02:00
Rafael J. Wysocki
cd0ea672f5 PM / Domains: Split device PM domain data into base and need_restore
The struct pm_domain_data data type is defined in such a way that
adding new fields specific to the generic PM domains code will
require include/linux/pm.h to be modified.  As a result, data types
used only by the generic PM domains code will be defined in two
headers, although they all should be defined in pm_domain.h and
pm.h will need to include more headers, which won't be very nice.

For this reason change the definition of struct pm_subsys_data
so that its domain_data member is a pointer, which will allow
struct pm_domain_data to be subclassed by various PM domains
implementations.  Remove the need_restore member from
struct pm_domain_data and make the generic PM domains code
subclass it by adding the need_restore member to the new data type.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-26 20:22:02 +02:00
Rafael J. Wysocki
0d41da2e31 Merge branch 'pm-fixes' into pm-domains
Merge commit e8b364b88c
(PM / Clocks: Do not acquire a mutex under a spinlock) fixing
a regression in drivers/base/power/clock_ops.c.

Conflicts:
	drivers/base/power/clock_ops.c
2011-09-26 20:12:45 +02:00