The engine->guc_id is GuC FW defined and it is not guaranteed to be
below I915_NUM_ENGINES, so we shouldn't use it with the i915-defined
client->submissions, as we might overflow.
Instead of fixing it, just get rid of client->submissions, because the
information we get from it is not interesting anymore now that we only
have 1 client.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814002145.29056-1-daniele.ceraolospurio@intel.com
A new macro that is going to be added in a further patch will need to
adjust the offset returned by _MMIO_TRANS2(), so here adding
_TRANS2() and moving most of the implementation of _MMIO_TRANS2() to
it and while at it taking the opportunity to rename pipe to trans.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiya@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiya@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730224753.14907-2-jose.souza@intel.com
Just moving it to reduce the tabs and avoid break code lines.
No behavior changes intended here.
v2:
- Reading misc display IRQ outside of gen8_de_misc_irq_handler() as
other irq handlers (Dhinakaran)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730224753.14907-1-jose.souza@intel.com
Stop assuming we only get called with irqs-on for disarming the
breadcrumbs, and do a full save/restore spin_lock_irq.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813132916.20382-2-chris@chris-wilson.co.uk
In this case we want to apply the mask and then shift so the
parentheses is needed.
SPANK! SPANK! SPANK! Naughty programmer!
Fixes: 9749a5b6c0 ("drm/i915/tgl: Fix the read of the DDI that transcoder is attached to")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812175405.14479-1-jose.souza@intel.com
Double check the end of the privilege buffer to make sure the size
of the privilege buffer remains unchanged after copy.
v4:
- Refine the commit message. (Zhenyu)
v3:
- To get the right offset of the batch buffer end cmd. (Yan)
v2:
- Use lightweight way to audit batch buffer end. (Yan)
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add valid length check for the commands with variable length.
v2: remove the macro definition. (Zhenyu)
v3: refine the LRI command. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Gao, Fred <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add the constant valid length of MI command.
v2: Add F_VAL_CONST flag. (Zhenyu Wang)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Gao, Fred <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add utility for valid command length check.
v2: Add F_VAL_CONST flag to identify the value is const
although LEN maybe variable. (Zhenyu)
v3: unused code removal, flag rename/conflict. (Zhenyu)
v4: redefine F_IP_ADVANCE_CUSTOM and move the check function to
next patch. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Gao, Fred <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Factor out tlb and mocs register offset table to fix the issues reported
by klocwork, #512 and #550. Mostly, the reason why the klocwork reports
these problems is because there can be possbilities for platforms, which
have more rings than the ring offset table, to take the dirty data from
the stack as the register offset. It results to a random HW register
offset writting in this scenairo when doing context switch between vGPUs.
After the factoring, the ring offset table of TLB and MOCS should be per
platform.
v2:
- Enable TLB register switch for GEN8. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because there is no need to check these functions, a number of local
functions can be made to return void to simplify things as nothing can
fail.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gvt-dev@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We don't care about internal firmware status changes unless
we are doing some real debugging. Note that our CI is not
using DRM_I915_DEBUG_GUC config by default so use it.
v2: protect against accidental overwrites (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813081559.23936-1-michal.wajdeczko@intel.com
Since execlists and the guc have diverged in their port tracking, we
cannot simply reuse the execlists cancellation code as it leads to
unbalanced reference counting. Use a local, simpler routine for the guc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812203626.3948-1-chris@chris-wilson.co.uk
We rely on the tasklet to update the GT PM refcount, so we can't disable
it even if we've processed all the requests for the engine because we
might have detected the request completion before the interrupt arrived.
Since on all platforms on which we plan to support guc submission we
don't allow disabling the breadcrumb interrupts, we can further siplify
the park/unpark flow by removing the interrupt pin/unpin. A BUG_ON has
been added to catch changes to this flow that would require us to
restore some kind of pinning.
v2: split removal of engine_pin/unpin_breadcrumbs_irq to its own
patch (chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812233152.2172-1-daniele.ceraolospurio@intel.com
Remove the raw i915_active_request tracking in favour of the higher
level i915_active tracking for the sole purpose of making the lockless
transition easier in later patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812174804.26180-2-chris@chris-wilson.co.uk
We were using the last_fence to track the last request that used this
vma that might be interpreted by a fence register and forced ourselves
to wait for this request before modifying any fence register that
overlapped our vma. Due to requirement that we need to track any XY_BLT
command, linear or tiled, this in effect meant that we have to track the
vma for its active lifespan anyway, so we can forgo the explicit
last_fence tracking and just use the whole vma->active.
Another solution would be to pipeline the register updates, and would
help resolve some long running stalls for gen3 (but only gen 2 and 3!)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812174804.26180-1-chris@chris-wilson.co.uk
i915_irq.c is large. It serves as the central dispatch and handler for
all of our device interrupts. Lets break it up by pulling out the GT
interrupt handlers.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811210633.18417-1-chris@chris-wilson.co.uk
i915_irq.c is large. It serves as the central dispatch and handler for
all of our device interrupts. Pull out the GT pm interrupt handling
(leaving the central dispatch) so that we can encapsulate the logic a
little better.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811142801.2460-1-chris@chris-wilson.co.uk
Include 2019 in copyright years and start using SPDX tag.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812092935.21048-1-michal.wajdeczko@intel.com
The DDI-IO power wells (PWR_WELL_CTL_DDI) are backing
the IO/PHY functionality, which doesn't need the PG3
power power well. Accordingly fixing up the list of
PG3 power domains.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811100232.27964-1-anshuman.gupta@intel.com
The DDI-IO power wells (PWR_WELL_CTL_DDI) are backing
the IO/PHY functionality, which doesn't need the PG3
power power well. Accordingly fixing up the list of
PG3 power domains.
v2: Removed "DDI E/F IO"power domain as well [Imre]
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811081908.9114-1-anshuman.gupta@intel.com
Since commit 6ca9a2beb5 ("drm/i915: Unwind i915_gem_init() failure")
we believed that we correctly handle all errors encountered during
GuC initialization, including special one that indicates request to
run driver with disabled GPU submission (-EIO).
Unfortunately since commit 121981fafe ("drm/i915/guc: Combine
enable_guc_loading|submission modparams") we stopped using that
error code to avoid unwanted fallback to execlist submission mode.
In result any GuC initialization failure was treated as non-recoverable
error leading to driver load abort, so we could not even read related
GuC error log to investigate cause of the problem.
For now always return -EIO on any uC hardware related failure.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811195132.9660-5-michal.wajdeczko@intel.com
Our old messages were redundant or misleading (as loaded is
not the same as running). Keep only one message for debug.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811195132.9660-4-michal.wajdeczko@intel.com
After successful uC initialization we are reporting GuC
firmware version and status of GuC submission and HuC.
Add HuC fw version to this report to make it complete,
but also skip all HuC info if HuC is not supported.
v2: squeeze to one line (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812073949.24076-1-michal.wajdeczko@intel.com
We don't want to rely on misleading WOPCM partitioning error.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811195132.9660-2-michal.wajdeczko@intel.com
Before we start upon our great GT interrupt refactor, throw out the
cruft! In this case, it is an unloved debugfs showing the current ips
status, a fairly meaningless bunch of numbers that we are not checking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810090329.6966-1-chris@chris-wilson.co.uk
Simple buddy allocator. We want to allocate properly aligned
power-of-two blocks to promote usage of huge-pages for the GTT, so 64K,
2M and possibly even 1G. While we do support allocating stuff at a
specific offset, it is more intended for preallocating portions of the
address space, say for an initial framebuffer, for other uses drm_mm is
probably a much better fit. Anyway, hopefully this can all be thrown
away if we eventually move to having the core MM manage device memory.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809202926.14545-2-matthew.auld@intel.com
We can already clear an object with the blt, so try to do the same to
support copying from one object backing store to another. Really this is
just object -> object, which is not that useful yet, what we really want
is two backing stores, but that will require some vma rework first,
otherwise we are stuck with "tmp" objects.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810174338.19810-1-chris@chris-wilson.co.uk
We currently disable THP(Transparent-Huge-Pages) for our shmem objects
due to a performance regression with read BW in some internal
benchmarks. Given that this is our main source of 2M pages, there really
isn't much point in enabling 2M GTT pages, especially as that comes at
the cost of disabling the GTT cache. However from gen11 it looks like we
should hopefully see the HW issue resolved. Given this opt for only
enabling 2M GTT pages from gen11 onwards.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809193456.3836-2-matthew.auld@intel.com
For some platforms the GTT cache is by default not enabled, and
currently where we explicitly enable it, we make it conditional on 2M GTT
page support, since the BSpec states that we must disable it if we
enable 2M/1G pages. To make this more consistent opt for blanket
enabling the GTT cache for all relevant gens in a single place, while
still keeping the same behaviour of checking for 2M support.
BSpec: 9314
BSpec: 423
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809193456.3836-1-matthew.auld@intel.com
Using the gpu to write to some dword over a number of pages is rather
useful, and we already have two copies of such a thing, and we don't
want a third so move it to utils. There is probably some other stuff
also...
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810105008.14320-1-chris@chris-wilson.co.uk
As pointed out by Chris, with our current approach we are actually
limited to S16_MAX * PAGE_SIZE for our size when using the blt to clear
pages. Keeping things simple try to fix this by reducing the copy to a
sequence of S16_MAX * PAGE_SIZE blocks.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: hide the details of the engine pool inside emit_vma]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810092945.2762-1-chris@chris-wilson.co.uk
Currently we just pass in bcs0->engine_context so it matters not, but in
the future we may want to pass in something that is not a
kernel_context, so try to be a bit more generic.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810091748.10972-1-chris@chris-wilson.co.uk
Multiple uncore structures will share the debug infrastructure, so
move it to a common place and add extra locking around it.
Also, since we now have a separate object, it is cleaner to have
dedicated functions working on the object to stop and restart the
mmio debug. Apart from the cosmetic changes, this patch introduces
2 functional updates:
- All calls to check_for_unclaimed_mmio will now return false when
the debug is suspended, not just the ones that are active only when
i915_modparams.mmio_debug is set. If we don't trust the result of the
check while a user is doing mmio access then we shouldn't attempt the
check anywhere.
- i915_modparams.mmio_debug is not save/restored anymore around user
access. The value is now never touched by the kernel while debug is
disabled so no need for save/restore.
v2: squash mmio_debug patches, restrict mmio_debug lock usage (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809063116.7527-1-chris@chris-wilson.co.uk
The filesystem reconfigure API is undergoing a transition, breaking our
current code. As we only set the default options, we can simply remove
the call to s_op->remount_fs(). In the future, when HW permits, we can
try re-enabling huge page support, albeit as suggested with new per-file
controls.
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808172226.18306-1-chris@chris-wilson.co.uk
Move the timeline from being inside the intel_ring to intel_context
itself. This saves much pointer dancing and makes the relations of the
context to its timeline much clearer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-4-chris@chris-wilson.co.uk
Refactor the backends to handle the deferred context allocation in a
consistent manner, and allow calling it as an explicit first step in
pinning a context for the first time. This should make it easier for
backends to keep track of partially constructed contexts from
initialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-2-chris@chris-wilson.co.uk
As we are phasing out using the GEM context for internal clients that
need to manipulate logical context state directly, remove the
constructor for the GVT context. We are not using it for anything other
than default setup and allocation of an i915_ppgtt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-1-chris@chris-wilson.co.uk
Since we have already stopped the ring, cleared the ring, disabled the
ring (and verifying the ring is clear), a later debug message that the
ring is no longer clear serves no function. It appears it restarts
anyway, and we verify that the ring started correctly afterwards.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808074207.18274-4-chris@chris-wilson.co.uk
For the default I915_EXEC_BSD round robin selector, it may select any
available VCS engine. Make it so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809091010.23281-3-chris@chris-wilson.co.uk
