Commit graph

497 commits

Author SHA1 Message Date
Stefan Richter
25a41b2800 ieee1394: add quirk fix for Freecom HDD
According to http://bugzilla.kernel.org/show_bug.cgi?id=12206, Freecom
FireWire Hard Drive 1TB reports max_rom=2 but returns garbage if block
read requests are used to read the config ROM.  Force max_rom=0 to limit
them to quadlet read requests.

Reported-by: Christian Mueller <cm1@mumac.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-12-14 01:13:13 +01:00
Nigel Cunningham
ec9a13cdbf ieee1394: node manager causes up to ~3.25s delay in freezing tasks
The firewire nodemanager function "nodemgr_host_thread" contains a loop
that calls try_to_freeze near the top of the loop, but then delays for
up to 3.25 seconds (plus time to do work) before getting back to the top
of the loop. When starting a cycle post-boot, this doesn't seem to bite,
but it is causing a noticeable delay at boot time, when freezing
processes prior to starting to read the image.

The following patch adds invocation of try_to_freeze to the subloops
that are used in the body of this function. With these additions, the
time to freeze when starting to resume at boot time is virtually zero.
I'm no expert on firewire, and so don't know that we shouldn't check
the return value and jump back to the top of the loop or such like after
being frozen, but I submit it for your consideration.

Signed-off-by: Nigel Cunningham <nigel@tuxonice.net>

The delay until nodemgr freezes was up to 0.25s (plus time for node
probes) in Linux 2.6.27 and older and up to 3.25s (plus ~) since Linux
2.6.28-rc1, hence much more noticeable.

try_to_freeze() without any jump is correct.  The surrounding code in
the respective loops will catch whether another bus reset happens during
the freeze and handle it.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-12-09 19:34:33 +01:00
Stefan Richter
2642b11295 ieee1394: sbp2: fix race condition in state change
An intermediate transition from _RUNNING to _IN_SHUTDOWN could have been
missed by the former code.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-29 17:07:56 +01:00
Stefan Richter
e47c1feb17 ieee1394: fix list corruption (reported at module removal)
If there is more than one FireWire controller present, dummy_zero_addr
and dummy_max_addr were added multiple times to different lists, thus
corrupting the lists.  Fix this by allocating them dynamically per host
instead of just once globally.

(Perhaps a better address space allocation algorithm could rid us of the
two dummy address spaces.)

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10129 .

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-29 17:07:56 +01:00
Stefan Richter
9e0de91011 ieee1394: sbp2: another iPod mini quirk entry
Add another model ID of a broken firmware to prevent early I/O errors
by acesses at the end of the disk.  Reported at linux1394-user,
http://marc.info/?t=122670842900002

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-25 21:38:31 +01:00
Linus Torvalds
6572a281cf Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: dv1394: fix possible deadlock in multithreaded clients
  ieee1394: raw1394: fix possible deadlock in multithreaded clients
  ieee1394: struct device - replace bus_id with dev_name(), dev_set_name()
  firewire: struct device - replace bus_id with dev_name(), dev_set_name()
2008-11-06 15:55:34 -08:00
Al Viro
233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Stefan Richter
8449fc3ae5 ieee1394: dv1394: fix possible deadlock in multithreaded clients
Fix a possible though highly unlikely deadlock:

Thread A:                  Thread B:
 - acquire mmap_sem         - dv1394_ioctl/read/write()
 - dv1394_mmap()            - acquire video->mtx
 - acquire video->mtx       - copy_to/from_user(), possible page fault:
                              acquire mmap_sem

The simplest fix is to use mutex_trylock() instead of mutex_lock() in
dv1394_mmap().  This changes the behavior under contention in a way
which is visible to userspace clients.  However, my guess is that no
clients exist which use mmap vs. ioctl/read/write on the dv1394
character device file interface in concurrent threads.

Reported-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-31 08:48:26 +01:00
Stefan Richter
638570b543 ieee1394: raw1394: fix possible deadlock in multithreaded clients
Regression in 2.6.28-rc1:  When I added the new state_mutex which
prevents corruption of raw1394's internal state when accessed by
multithreaded client applications, the following possible though
highly unlikely deadlock slipped in:

Thread A:                  Thread B:
 - acquire mmap_sem         - raw1394_write() or raw1394_ioctl()
 - raw1394_mmap()           - acquire state_mutex
 - acquire state_mutex      - copy_to/from_user(), possible page fault:
                              acquire mmap_sem

The simplest fix is to use mutex_trylock() instead of mutex_lock() in
raw1394_mmap().  This changes the behavior under contention in a way
which is visible to userspace clients.  However, since multithreaded
access was entirely buggy before state_mutex was added and libraw1394's
documentation advised application programmers to use a handle only in a
single thread, this change in behaviour should not be an issue in
practice at all.

Since we have to use mutex_trylock() in raw1394_mmap() regardless
whether /dev/raw1394 was opened with O_NONBLOCK or not, we now use
mutex_trylock() unconditionally everywhere for state_mutex, just to have
consistent behavior.

Reported-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-31 08:48:26 +01:00
Kay Sievers
233976e539 ieee1394: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-31 08:48:25 +01:00
Linus Torvalds
1eee21abaf Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: Add more documentation to firewire-cdev.h
  firewire: fix ioctl() return code
  firewire: fix setting tag and sy in iso transmission
  firewire: fw-sbp2: fix another small generation access bug
  firewire: fw-sbp2: enforce s/g segment size limit
  firewire: fw_send_request_sync()
  ieee1394: survive a few seconds connection loss
  ieee1394: nodemgr clean up class iterators
  ieee1394: dv1394, video1394: remove unnecessary expressions
  ieee1394: raw1394: make write() thread-safe
  ieee1394: raw1394: narrow down the state_mutex protected region
  ieee1394: raw1394: replace BKL by local mutex, make ioctl() and mmap() thread-safe
  ieee1394: sbp2: enforce s/g segment size limit
  ieee1394: sbp2: check for DMA mapping failures
  ieee1394: sbp2: stricter dma_sync
  ieee1394: Use DIV_ROUND_UP
2008-10-16 15:02:24 -07:00
Greg Kroah-Hartman
6229df31b9 device create: ieee1394: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Cc: Ben Collins <ben.collins@ubuntu.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:42 -07:00
Stefan Richter
fc392fe831 ieee1394: survive a few seconds connection loss
There are situations when nodes vanish from the bus and come back in
quickly thereafter:
  - When certain bus-powered hubs are plugged in,
  - when certain disk enclosures are switched from self-power to bus
    power or vice versa and break the daisy chain during the transition,
  - when the user plugs a cable out and quickly plugs it back in, e.g.
    to reorder a daisy chain (works on Mac OS X if done quickly enough),
  - when certain hubs temporarily malfunction during high bus traffic.

The ieee1394 driver's nodemgr already contained a function to set
vanished nodes aside into "limbo"; i.e. they wouldn't actually be
deleted right away.  (In fact, only unloading the driver or writing into
an obscure sysfs attribute would delete them eventually.)  If nodes
reappeared later, they would be resurrected out of limbo.

Moving nodes into and out of limbo was accompanied with calling the
.suspend() and .resume() driver methods of the drivers which were bound
to a respective node's unit directories.  Not only is this somewhat
strange due to the intended use of these driver methods for power
management, also the sbp2 driver in particular does not implement
.suspend() and .resume().  Hence sbp2 would be disconnected from devices
in situations as listed above.

We now:
  - leave drivers bound when nodes go into limbo,
  - call the drivers' .update() when nodes come out of limbo,
  - automatically delete in-limbo nodes 3 seconds after the last
    bus reset and bus rescan.
  - Because of the automatic removal, the now obsolete bus attribute
    /sys/bus/ieee1394/destroy_node is removed.

This especially lets sbp2 survive brief disconnections.  You can for
example yank a disk's cable and plug it back in while reading the
respective disk with dd, but dd will happily continue as if nothing
happened.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:09 +02:00
Stefan Richter
11305c3eda ieee1394: nodemgr clean up class iterators
Remove useless pointer type casts.
Remove unnecessary hi->host indirection where only host is used.
Remove an unnecessary WARN_ON.
Change a few names.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:09 +02:00
Stefan Richter
d98562d12f ieee1394: dv1394, video1394: remove unnecessary expressions
init->channel and v.buffer are unsigned and tests for < 0 therefore
always false.  gcc knows this and eliminates the code, but anyway...
Reported by Roel Kluin.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:09 +02:00
Stefan Richter
f22e52b89e ieee1394: raw1394: make write() thread-safe
Application programs should use a libraw1394 handle only in a single
thread.  The raw1394 driver was apparently relying on this, because it
did nothing to protect its fi->state variable from corruption due to
concurrent accesses.

We now serialize the fi->state accesses.  This affects the write() path.
We re-use the state_mutex which was introduced to protect fi->iso_state
accesses in the ioctl() path.  These paths and accesses are independent
of each other, hence separate mutexes could be used.  But I don't see
much benefit in that.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:08 +02:00
Stefan Richter
ddfb908d3f ieee1394: raw1394: narrow down the state_mutex protected region
Refactor the ioctl dispatcher in order to move a fraction of it out of
the section which is serialized by fi->state_mutex.  This is not so much
about performance but more about self-documentation:  The mutex_lock()/
mutex_unlock() calls are now closer to the data accesses which the mutex
protects, i.e. to the iso_state switch.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:08 +02:00
Stefan Richter
10963ea1bd ieee1394: raw1394: replace BKL by local mutex, make ioctl() and mmap() thread-safe
This removes the last usage of the Big Kernel Lock from the ieee1394
stack, i.e. from raw1394's (unlocked_)ioctl and compat_ioctl.

The ioctl()s don't need to take the BKL, but they need to be serialized
per struct file *.  In particular, accesses to ->iso_state need to be
serial.  We simply use a blocking mutex for this purpose because
libraw1394 does not use O_NONBLOCK.  In practice, there is no lock
contention anyway because most if not all libraw1394 clients use a
libraw1394 handle only in a single thread.

mmap() also accesses ->iso_state.  Until now this was unprotected
against concurrent changes by ioctls.  Fix this bug while we are at it.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:08 +02:00
Stefan Richter
ed6ffd0808 ieee1394: sbp2: enforce s/g segment size limit
1. We don't need to round the SBP-2 segment size limit down to a
   multiple of 4 kB (0xffff -> 0xf000).  It is only necessary to
   ensure quadlet alignment (0xffff -> 0xfffc).

2. Use dma_set_max_seg_size() to tell the DMA mapping infrastructure
   and the block IO layer about the restriction.  This way we can
   remove the size checks and segment splitting in the queuecommand
   path.

   This assumes that no other code in the ieee1394 stack uses
   dma_map_sg() with conflicting requirements.  It furthermore assumes
   that the controller device's platform actually allows us to set the
   segment size to our liking.  Assert the latter with a BUG_ON().

3. Also use blk_queue_max_segment_size() to tell the block IO layer
   about it.  It cannot know it because our scsi_add_host() does not
   point to the FireWire controller's device.

We can also uniformly use dma_map_sg() for the single segment case just
like for the multi segment case, to further simplify the code.

Also clean up how the page table is converted to big endian.

Thanks to Grant Grundler and FUJITA Tomonori for advice.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:07 +02:00
Stefan Richter
cd8c79f17a ieee1394: sbp2: check for DMA mapping failures
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:07 +02:00
Stefan Richter
0a77b17c85 ieee1394: sbp2: stricter dma_sync
Two dma_sync_single_for_cpu() were called in the wrong place.
Luckily they were merely for DMA_TO_DEVICE, hence nobody noticed.

Also reorder the matching dma_sync_single_for_device() a little bit
so that they reside in the same functions as their counterparts.
This also avoids syncing the s/g table for requests which don't use it.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:07 +02:00
Julia Lawall
68e2aa793e ieee1394: Use DIV_ROUND_UP
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:07 +02:00
Stefan Richter
a3384067fb ieee1394: sbp2: let nodemgr retry node updates during bus reset series
sbp2 was too quick to report .update() to the ieee1394 core as failed.
(Logged as "Failed to reconnect to sbp2 device!".)  The core would then
unbind sbp2 from the device.

This is not justified if the .update() failed because another bus reset
happened.  We check this and tell the ieee1394 that .update() succeeded,
and the core will call sbp2's .update() for the new bus reset as well.

This improves reconnection/re-login especially on buses with several
disks as they may issue bus resets in close succession when they come
online.

Tested by Damien Benoist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-19 18:47:56 +02:00
Stefan Richter
c921a97457 ieee1394: don't drop nodes during bus reset series
nodemgr_node_probe checked for generation increments too late and
therefore prematurely reported nodes as "suspended".

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11349.  Reported and
tested by Damien Benoist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-19 18:47:55 +02:00
Stefan Richter
6848408abf ieee1394: regression in 2.6.25: updates should happen before probes
Regression since commit 73cf60232e,
"ieee1394: use class iteration api":  The two loops for (1.) driver
updates and (2.) driver probes were replaced by a single loop with
bogus needs_probe checks.  Hence updates and probes were now intermixed,
and especially sbp2 updates (reconnects) held up longer than necessary.

While we fix it, change the needs_probe flag to bool type for clarity.

Tested by Damien Benoist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-19 18:47:55 +02:00
Andrea Righi
27ac792ca0 PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures
On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:

	u64 val = PAGE_ALIGN(size);

always returns a value < 4GB even if size is greater than 4GB.

The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):

#define PAGE_SHIFT      12
#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK       (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)

The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.

Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.

See also lkml discussion: http://lkml.org/lkml/2008/6/11/237

[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:21 -07:00
Greg Kroah-Hartman
695794ae0c Driver Core: add ability for class_find_device to start in middle of list
This mirrors the functionality that driver_find_device has as well.

We add a start variable, and all callers of the function are fixed up at
the same time.

The block layer will be using this new functionality in a follow-on
patch.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:47 -07:00
Greg Kroah-Hartman
93562b5376 Driver Core: add ability for class_for_each_device to start in middle of list
This mirrors the functionality that driver_for_each_device has as well.

We add a start variable, and all callers of the function are fixed up at
the same time.

The block layer will be using this new functionality in a follow-on
patch.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:47 -07:00
Greg Kroah-Hartman
f71674a09f device create: ieee1394: convert device_create to device_create_drvdata
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Ben Collins <ben.collins@ubuntu.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:43 -07:00
Linus Torvalds
22a37bcb78 Merge branch 'sbp2-spindown' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'sbp2-spindown' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: spin disks down on suspend and shutdown
  firewire: fw-sbp2: spin disks down on suspend and shutdown
  ieee1394: sbp2: fix spindown for PL-3507 and TSB42AA9 firmwares
  firewire: fw-sbp2: fix spindown for PL-3507 and TSB42AA9 firmwares
  scsi: sd: optionally set power condition in START STOP UNIT
2008-07-15 12:39:44 -07:00
Philippe De Muyter
435f972697 ieee1394: dump mmapped iso buffers in core files
Currently, core files do not contain the mmapped memory of the video1394
or dv1394 devices, which contain the actual video input, making it
impossible to analyse the cause of abnormal program termination for
image analysis or (de)compression software.  Fix that.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>

Also affects users of the rawiso ioctl API of raw1394.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14 13:06:02 +02:00
Alan Cox
3aea50a379 ieee1394: raw1394: Push the BKL down into the driver ioctls
Actually in this case wrap the function for now.

Signed-off-by: Alan Cox <alan@redhat.com>

Added raw1394_compat_ioctl hunk.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14 13:06:02 +02:00
Stefan Richter
055a7da0bb ieee1394: video1394: reorder module init, prepare BKL removal
This prepares video1394 for removal of the BKL (big kernel lock):
It allows video1394_open() to be called while video1394_init_module()
is still in progress.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14 13:06:02 +02:00
Stefan Richter
fde675fa2a ieee1394: reduce log noise about config ROM CRC errors
This avoids redundant messages about a special and usually harmless
firmware flaw.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14 13:06:02 +02:00
Stefan Richter
82f06e8611 ieee1394: sbp2: spin disks down on suspend and shutdown
This instructs sd_mod to send START STOP UNIT on suspend and resume,
and on driver unbinding or unloading (including when the system is shut
down).

We don't do this though if multiple initiators may log in to the target.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14 13:00:18 +02:00
Stefan Richter
3719122a52 ieee1394: sbp2: fix spindown for PL-3507 and TSB42AA9 firmwares
Reported by Tino Keitel:  PL-3507 with firmware from Prolific does not
spin down the disk on START STOP UNIT with power condition = 0 and start
= 0.  It does however work with power condition = 2 or 3.

Also found while investigating this:  DViCO Momobay CX-1 and FX-3A (TI
TSB42AA9/A based) become unresponsive after START STOP UNIT with power
condition = 0 and start = 0.  They stay responsive if power condition is
set when stopping the motor.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14 13:00:18 +02:00
Stefan Richter
9499fe2b34 ieee1394: Kconfig menu touch-up
Rename and reorder some prompts and modify some help texts.
The result:

  -------------------- IEEE 1394 (FireWire) support --------------------
  *** Enable only one of the two stacks, unless you know what you are doing ***
  New FireWire stack, EXPERIMENTAL
    OHCI-1394 controllers
    Storage devices (SBP-2 protocol)
  Stable FireWire stack
    OHCI-1394 controllers
    PCILynx controller
    Storage devices (SBP-2 protocol)
      Enable replacement for physical DMA in SBP2
    IP over 1394
    raw1394 userspace interface
    video1394 userspace interface
    dv1394 userspace interface (deprecated)
    Excessive debugging output

The old prompts for reference:

  -------------------- IEEE 1394 (FireWire) support --------------------
  IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL
    Support for OHCI FireWire host controllers
    Support for storage devices (SBP-2 protocol driver)
  IEEE 1394 (FireWire) support
    *** Subsystem Options ***
    Excessive debugging output
    *** Controllers ***
    Texas Instruments PCILynx support
    OHCI-1394 support
    *** Protocols ***
    OHCI-1394 Video support
    SBP-2 support (Harddisks etc.)
      Enable replacement for physical DMA in SBP2
    IP over 1394
    OHCI-DV I/O support (deprecated)
    Raw IEEE1394 I/O support

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-06-19 00:12:36 +02:00
Stefan Richter
93c596f7d6 ieee1394: sbp2: use correct size of command descriptor block
Boaz Harrosh wrote:
> cmd->cmd_len is now guarantied to be set properly at all cases.
> And some commands you want to support will not be set correctly
> by COMMAND_SIZE().

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-05-20 18:24:17 +02:00
Linus Torvalds
886c35fbcf Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: fw-sbp2: log scsi_target ID at release
  ieee1394: fix NULL pointer dereference in sysfs access
2008-05-01 11:31:38 -07:00
Stefan Richter
07c7224cf7 ieee1394: fix NULL pointer dereference in sysfs access
Regression since "ieee1394: prevent device binding of raw1394,
video1394, dv1394", commit d2ace29fa4:
$ cat /sys/bus/ieee1394/drivers/raw1394/device_ids
triggers a NULL pointer dereference in fw_show_drv_device_ids.
Reported by Miles Lane.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Miles Lane <miles.lane@gmail.com>
2008-05-01 19:55:23 +02:00
Linus Torvalds
5f3b28781c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: silence defined but not used warning in non-modular builds
  ieee1394: rawiso: requeue packet for transmission after skipped cycle
2008-04-25 12:24:06 -07:00
Tony Breeds
e38649702e ieee1394: silence defined but not used warning in non-modular builds
Currently the kernel will issue the following warning:
drivers/ieee1394/raw1394.c:2938: warning: 'raw1394_id_table' defined but not used
Add #ifdef MODULE guards around the declaration.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>

Ditto with dv1394_id_table and video1394_id_table.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-25 18:15:45 +02:00
Pieter Palmers
cc9429bcb6 ieee1394: rawiso: requeue packet for transmission after skipped cycle
As it seems, some host controllers have issues that can cause them to
skip cycles now and then when using large packets. I suspect that this
is due to DMA not succeeding in time. If the transmit fifo can't contain
more than one packet (big packets), the DMA should provide a new packet
each cycle (125us). I am under the impression that my current PCI
express test system can't guarantee this.

In any case, the patch tries to provide a workaround as follows:
The DMA program descriptors are modified such that when an error occurs,
the DMA engine retries the descriptor the next cycle instead of
stalling. This way no data is lost. The side effect of this is that
packets are sent with one cycle delay. This however might not be that
much of a problem for certain protocols (e.g. AM824). If they use
padding packets for e.g. rate matching they can drop one of those to
resync the streams.

The amount of skips between two userspace wakeups is counted. This
number is then propagated to userspace through the upper 16 bits of the
'dropped' parameter. This allows unmodified userspace applications due
to the following:
1) libraw simply passes this dropped parameter to the user application
2) the meaning of the dropped parameter is: if it's nonzero, something
bad has happened. The actual value of the parameter at this moment does
not have a specific meaning.

A libraw client can then retrieve the number of skipped cycles and
account for them if needed.

Signed-off-by: Pieter Palmers <pieterp@joow.be>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-25 18:15:45 +02:00
Matthew Wilcox
6188e10d38 Convert asm/semaphore.h users to linux/semaphore.h
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:22:54 -04:00
Philippe De Muyter
a6ca4f7081 ieee1394: limit early node speed to host interface speed
The following patch limits the node speed to the host interface speed,
before using it.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>

It should actually suffice to do this only for the local node's
speedcap[].  But there is another bug in the speed calculation:
The local node's speed is not correctly propagated to the speeds
which are to be used to access remote nodes.
http://thread.gmane.org/gmane.linux.kernel.firewire.devel/11772/focus=12024

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Robert P. J. Day
ee2d91e2b3 ieee1394: Remove superfluous calls to kobject_set_name().
Unless you're adding a kobject to the sysfs hierarchy, there is no
point setting its kobject name.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Stefan Richter
9508c208aa ieee1394: ohci1394: missing PPC PMac feature calls in failure path
The failure path of ohci1394_pci_probe() reuses ohci1394_pci_remove().
Doing so it missed to call ohci1394_pmac_off() in a few unlikely early
error cases.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Stefan Richter
c4e2e02bc9 ieee1394: ohci1394: refactor some printk format strings
to reduce the size of ohci1394.ko.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Stefan Richter
d09c680383 ieee1394: ohci1394: unroll a macro with return
We don't want to hide something like return in a preprocessor macro.
Unroll the macro and use a goto, which also reduces the size of
ohci1394.ko.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Robert P. J. Day
e351c4d069 ieee1394: Use shorter list_splice_init() for brevity.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00