There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1. The debug message which is printed for
these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".
CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
00000000: 424d53fe 00000040 00000000 00000012 .SMB@...........
00000010: 00000001 00000000 ffffffff ffffffff ................
00000020: 00000000 00000000 00000000 00000000 ................
00000030: 00000000 00000000 00000000 00000000 ................
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1933527
Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.
Found testing xfstest 495 with modefromsid mount option
Fixes: f506550889 ("cifs: Retain old ACEs when converting between mode bits and ACL")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
For AES256 encryption (GCM and CCM), we need to adjust the size of a few
fields to 32 bytes instead of 16 to accommodate the larger keys.
Also, the L value supplied to the key generator needs to be changed from
to 256 when these algorithms are used.
Keeping the ioctl struct for dumping keys of the same size for now.
Will send out a different patch for that one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Steve French <stfrench@microsoft.com>
Applications that create and extend and write to a file do not
expect to see 0 allocation size. When file is extended,
set its allocation size to a plausible value until we have a
chance to query the server for it. When the file is cached
this will prevent showing an impossible number of allocated
blocks (like 0). This fixes e.g. xfstests 614 which does
1) create a file and set its size to 64K
2) mmap write 64K to the file
3) stat -c %b for the file (to query the number of allocated blocks)
It was failing because we returned 0 blocks. Even though we would
return the correct cached file size, we returned an impossible
allocation size.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
If CONFIG_CIFS_ROOT is not set, rootfs mount option is invalid
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org> # v5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
A typo is found out by codespell tool in 251th lines of cifs_swn.c:
$ codespell ./fs/cifs/
./cifs_swn.c:251: funciton ==> function
Fix a typo found by codespell.
Signed-off-by: Liu xuzhi <liu.xuzhi@zte.com.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb311_update_preauth_hash() uses the shash in server->secmech without
appropriate locking, and this can lead to sessions corrupting each
other's preauth hashes.
The following script can easily trigger the problem:
#!/bin/sh -e
NMOUNTS=10
for i in $(seq $NMOUNTS);
mkdir -p /tmp/mnt$i
umount /tmp/mnt$i 2>/dev/null || :
done
while :; do
for i in $(seq $NMOUNTS); do
mount -t cifs //192.168.0.1/test /tmp/mnt$i -o ... &
done
wait
for i in $(seq $NMOUNTS); do
umount /tmp/mnt$i
done
done
Usually within seconds this leads to one or more of the mounts failing
with the following errors, and a "Bad SMB2 signature for message" is
seen in the server logs:
CIFS: VFS: \\192.168.0.1 failed to connect to IPC (rc=-13)
CIFS: VFS: cifs_mount failed w/return code = -13
Fix it by holding the server mutex just like in the other places where
the shashes are used.
Fixes: 8bd68c6e47 ("CIFS: implement v3.11 preauth integrity")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After the fix for retaining externally set ACEs with cifsacl and
modefromsid,idsfromsid, there was an issue in populating the
inherited ACEs after setting the ACEs introduced by these two modes.
Fixed this by updating the ACE pointer again after the call to
populate_new_aces.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
if we have mkdir request reported successful *and* simulating lookup
gets us a non-directory (which is possible if another client has
managed to get rmdir and create in between), the sane action is not
to mangle ->i_mode of non-directory inode to S_IFDIR | mode, it's
"report success and return with dentry negative unhashed" - that
way the next lookup will do the right thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If the file had existed before we'd called ->atomic_open() (without
O_EXCL, that is), we have no more business setting ->i_mode than
we would setting ->i_uid or ->i_gid. We also have no business
doing either if another client has managed to get unlink+mkdir
between ->open() and cifs_inode_get_info().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In case of interrupted syscalls, prevent sending CLOSE commands for
compound CREATE+CLOSE requests by introducing an
CIFS_CP_CREATE_CLOSE_OP flag to indicate lower layers that it should
not send a CLOSE command to the MIDs corresponding the compound
CREATE+CLOSE request.
A simple reproducer:
#!/bin/bash
mount //server/share /mnt -o username=foo,password=***
tc qdisc add dev eth0 root netem delay 450ms
stat -f /mnt &>/dev/null & pid=$!
sleep 0.01
kill $pid
tc qdisc del dev eth0 root
umount /mnt
Before patch:
...
6 0.256893470 192.168.122.2 → 192.168.122.15 SMB2 402 Create Request File: ;GetInfo Request FS_INFO/FileFsFullSizeInformation;Close Request
7 0.257144491 192.168.122.15 → 192.168.122.2 SMB2 498 Create Response File: ;GetInfo Response;Close Response
9 0.260798209 192.168.122.2 → 192.168.122.15 SMB2 146 Close Request File:
10 0.260841089 192.168.122.15 → 192.168.122.2 SMB2 130 Close Response, Error: STATUS_FILE_CLOSED
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In cifs_statfs(), if server->ops->queryfs is not NULL, then we should
use its return value rather than always returning 0. Instead, use rc
variable as it is properly set to 0 in case there is no
server->ops->queryfs.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
A customer has reported that their dmesg were being flooded by
CIFS: VFS: \\server Cancelling wait for mid xxx cmd: a
CIFS: VFS: \\server Cancelling wait for mid yyy cmd: b
CIFS: VFS: \\server Cancelling wait for mid zzz cmd: c
because some processes that were performing statfs(2) on the share had
been interrupted due to their automount setup when certain users
logged in and out.
Change it to FYI as they should be mostly informative rather than
error messages.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The MIDs are mostly printed as decimal, so let's make it consistent.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
inode_wrong_type(inode, mode) returns true if setting inode->i_mode
to given value would've changed the inode type. We have enough of
those checks open-coded to make a helper worthwhile.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When doing a large read or write workload we only
very gradually increase the number of credits
which can cause problems with parallelizing large i/o
(I/O ramps up more slowly than it should for large
read/write workloads) especially with multichannel
when the number of credits on the secondary channels
starts out low (e.g. less than about 130) or when
recovering after server throttled back the number
of credit.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With multichannel, operations like the queries
from "ls -lR" can cause all credits to be used and
errors to be returned since max_credits was not
being set correctly on the secondary channels and
thus the client was requesting 0 credits incorrectly
in some cases (which can lead to not having
enough credits to perform any operation on that
channel).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=RQo/
-----END PGP SIGNATURE-----
Merge tag '5.12-smb3-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- improvements to mode bit conversion, chmod and chown when using
cifsacl mount option
- two new mount options for controlling attribute caching
- improvements to crediting and reconnect, improved debugging
- reconnect fix
- add SMB3.1.1 dialect to default dialects for vers=3
* tag '5.12-smb3-part1' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
cifs: update internal version number
cifs: use discard iterator to discard unneeded network data more efficiently
cifs: introduce helper for finding referral server to improve DFS target resolution
cifs: check all path components in resolved dfs target
cifs: fix DFS failover
cifs: fix nodfs mount option
cifs: fix handling of escaped ',' in the password mount argument
cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout
cifs: convert revalidate of directories to using directory metadata cache timeout
cifs: Add new mount parameter "acdirmax" to allow caching directory metadata
cifs: If a corrupted DACL is returned by the server, bail out.
cifs: minor simplification to smb2_is_network_name_deleted
TCON Reconnect during STATUS_NETWORK_NAME_DELETED
cifs: cleanup a few le16 vs. le32 uses in cifsacl.c
cifs: Change SIDs in ACEs while transferring file ownership.
cifs: Retain old ACEs when converting between mode bits and ACL.
cifs: Fix cifsacl ACE mask for group and others.
cifs: clarify hostname vs ip address in /proc/fs/cifs/DebugData
cifs: change confusing field serverName (to ip_addr)
cifs: Fix inconsistent IS_ERR and PTR_ERR
...
The iterator, ITER_DISCARD, that can only be used in READ mode and
just discards any data copied to it, was added to allow a network
filesystem to discard any unwanted data sent by a server.
Convert cifs_discard_from_socket() to use this.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers seem to mistakenly report different values for
capabilities and share flags, so we can't always rely on those values
to decide whether the resolved target can handle any new DFS
referrals.
Add a new helper is_referral_server() to check if all resolved targets
can handle new DFS referrals by directly looking at the
GET_DFS_REFERRAL.ReferralHeaderFlags value as specified in MS-DFSC
2.2.4 RESP_GET_DFS_REFERRAL in addition to is_tcon_dfs().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
Handle the case where a resolved target share is like
//server/users/dir, and the user "foo" has no read permission to
access the parent folder "users" but has access to the final path
component "dir".
is_path_remote() already implements that, so call it directly.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
In do_dfs_failover(), the mount_get_conns() function requires the full
fs context in order to get new connection to server, so clone the
original context and change it accordingly when retrying the DFS
targets in the referral.
If failover was successful, then update original context with the new
UNC, prefix path and ip address.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip DFS resolving when mounting with 'nodfs' even if
CONFIG_CIFS_DFS_UPCALL is enabled.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Passwords can contain ',' which are also used as the separator between
mount options. Mount.cifs will escape all ',' characters as the string ",,".
Update parsing of the mount options to detect ",," and treat it as a single
'c' character.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Cc: stable@vger.kernel.org # 5.11
Reported-by: Simon Taylor <simon@simon-taylor.me.uk>
Tested-by: Simon Taylor <simon@simon-taylor.me.uk>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The new optional mount parameter "acregmax" allows a different
timeout for file metadata ("acdirmax" now allows controlling timeout
for directory metadata). Setting "actimeo" still works as before,
and changes timeout for both files and directories, but
specifying "acregmax" or "acdirmax" allows overriding the
default more granularly which can be a big performance benefit
on some workloads. "acregmax" is already used by NFS as a mount
parameter (albeit with a larger default and thus looser caching).
Suggested-by: Tom Talpey <tom@talpey.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The new optional mount parm, "acdirmax" allows caching the metadata
for a directory longer than file metadata, which can be very helpful
for performance. Convert cifs_inode_needs_reval to check acdirmax
for revalidating directory metadata.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
nfs and cifs on Linux currently have a mount parameter "actimeo" to control
metadata (attribute) caching but cifs does not have additional mount
parameters to allow distinguishing between caching directory metadata
(e.g. needed to revalidate paths) and that for files.
Add new mount parameter "acdirmax" to allow caching metadata for
directories more loosely than file data. NFS adjusts metadata
caching from acdirmin to acdirmax (and another two mount parms
for files) but to reduce complexity, it is safer to just introduce
the one mount parm to allow caching directories longer. The
defaults for acdirmax and actimeo (for cifs.ko) are conservative,
1 second (NFS defaults acdirmax to 60 seconds). For many workloads,
setting acdirmax to a higher value is safe and will improve
performance. This patch leaves unchanged the default values
for caching metadata for files and directories but gives the
user more flexibility in adjusting them safely for their workload
via the new mount parm.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Static code analysis reported a possible null pointer dereference
in my last commit:
cifs: Retain old ACEs when converting between mode bits and ACL.
This could happen if the DACL returned by the server is corrupted.
We were trying to continue by assuming that the file has empty DACL.
We should bail out with an error instead.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
Trivial change to clarify code in smb2_is_network_name_deleted
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When server returns error STATUS_NETWORK_NAME_DELETED, TCON
must be marked for reconnect. So, subsequent IO does the tree
connect again.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With cifsacl, when a file/dir ownership is transferred (chown/chgrp),
the ACEs in the DACL for that file will need to replace the old owner
SIDs with the new owner SID.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When cifsacl mount option is used, retain the ACEs which
should not be modified during chmod. Following is the approach taken:
1. Retain all explicit (non-inherited) ACEs, unless the SID is one
of owner/group/everyone/authenticated-users. We're going to set new
ACEs for these SIDs anyways.
2. At the end of the list of explicit ACEs, place the new list of
ACEs obtained by necessary conversion/encoding.
3. Once the converted/encoded ACEs are set, copy all the remaining
ACEs (inherited) into the new ACL.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A two line fix which I made while testing my prev fix with
cifsacl mode conversions seem to have gone missing in the final fix
that was submitted. This is that fix.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
/proc/fs/cifs/DebugData called the ip address for server sessions
"Name" which is confusing since it is not a hostname. Change
this field name to "Address" and for the list of servers add
new field "Hostname" which is populated from the hostname used
to connect to the server. See below. And also don't print
[NONE] when the interface list is empty as it is not clear
what 'NONE' referred to.
Servers:
1) ConnectionId: 0x1 Hostname: localhost
Number of credits: 389 Dialect 0x311
TCP status: 1 Instance: 1
Local Users To Server: 1 SecMode: 0x1 Req On Wire: 0
In Send: 0 In MaxReq Wait: 0
Sessions:
1) Address: 127.0.0.1
...
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ses->serverName is not the server name, but the string form
of the ip address of the server. Change the name to ip_addr
to avoid confusion (and fix the array length to match
maximum length of ipv6 address).
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull d_name whack-a-mole from Al Viro:
"A bunch of places that play with ->d_name in printks instead of using
proper formats..."
* 'work.d_name' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs_file_mmap(): use %pD
cifs_debug: use %pd instead of messing with ->d_name
erofs: use %pd instead of messing with ->d_name
cramfs: use %pD instead of messing with file_dentry()->d_name
Fix inconsistent IS_ERR and PTR_ERR in cifs_find_swn_reg(). The proper
pointer to be passed as argument to PTR_ERR() is share_name.
This bug was detected with the help of Coccinelle.
Fixes: bf80e5d425 ("cifs: Send witness register and unregister commands to userspace daemon")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Introduced a new field conn_id in TCP_Server_Info structure.
This is a non-persistent unique identifier maintained by the client
for a connection to a file server. For this, a global counter named
tcpSesNextId is maintained. On allocating a new TCP_Server_Info,
this counter is incremented and assigned.
Changed the dynamic tracepoints related to reconnects and
crediting to be more informative (with conn_id printed).
Debugging a crediting issue helped me understand the
important things to print here.
Always call dynamic tracepoints outside the scope of spinlocks.
To do this, copy out the credits and in_flight fields of the
server struct before dropping the lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For failure by timeout waiting for credits, changed the error
returned to the app with EBUSY, instead of ENOTSUPP. This is done
because this situation is possible even in non-buggy cases. i.e.
overloaded server can return 0 credits until done with outstanding
requests. And this feels like a better error to return to the app.
For cases of zero credits found even when there are no requests
in flight, replaced ENOTSUPP with EDEADLK, since we're avoiding
deadlock here by returning error.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to share the CIFS_NEG_OP flag between negotiate and
session authentication. There was an assumption in the code that
CIFS_NEG_OP is used by negotiate only. So introcuded CIFS_SESS_OP
and used it for session setup optypes.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3.1.1 is the newest, and preferred dialect, and is included in
the requested dialect list by default (ie if no vers= is specified
on mount) but it should also be requested if SMB3 or later is requested
(vers=3 instead of a specific dialect: vers=2.1, vers=3.02 or vers=3.0).
Currently specifying "vers=3" only requests smb3.0 and smb3.02 but this
patch fixes it to also request smb3.1.1 dialect, as it is the newest
and most secure dialect and is a "version 3 or later" dialect (the intent
of "vers=3").
Signed-off-by: Steve French <stfrench@microsoft.com>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
While debugging another issue today, Steve and I noticed that if a
subdir for a file share is already mounted on the client, any new
mount of any other subdir (or the file share root) of the same share
results in sharing the cifs superblock, which e.g. can result in
incorrect device name.
While setting prefix path for the root of a cifs_sb,
CIFS_MOUNT_USE_PREFIX_PATH flag should also be set.
Without it, prepath is not even considered in some places,
and output of "mount" and various /proc/<>/*mount* related
options can be missing part of the device name.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
so we no longer need to handle or parse the UNC= and prefixpath=
options that mount.cifs are generating.
This also fixes a bug in the mount command option where the devname
would be truncated into just //server/share because we were looking
at the truncated UNC value and not the full path.
I.e. in the mount command output the devive //server/share/path
would show up as just //server/share
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes small regression in implementation of new mount API.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reported-by: Hyunchul Lee <hyc.lee@gmail.com>
Tested-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes a regression following dfs links that was introduced in the
patch series for the new mount api.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Assuming
- //HOST/a is mounted on /mnt
- //HOST/b is mounted on /mnt/b
On a slow connection, running 'df' and killing it while it's
processing /mnt/b can make cifs_get_inode_info() returns -ERESTARTSYS.
This triggers the following chain of events:
=> the dentry revalidation fail
=> dentry is put and released
=> superblock associated with the dentry is put
=> /mnt/b is unmounted
This patch makes cifs_d_revalidate() return the error instead of 0
(invalid) when cifs_revalidate_dentry() fails, except for ENOENT (file
deleted) and ESTALE (file recreated).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Suggested-by: Shyam Prasad N <nspmangalore@gmail.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
CC: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently we try to guess if a compound request is going to
succeed waiting for credits or not based on the number of
requests in flight. This approach doesn't work correctly
all the time because there may be only one request in
flight which is going to bring multiple credits satisfying
the compound request.
Change the behavior to fail a request only if there are no requests
in flight at all and proceed waiting for credits otherwise.
Cc: <stable@vger.kernel.org> # 5.1+
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
While addressing some warnings generated by -Warray-bounds, I found this
bug that was introduced back in 2017:
CC [M] fs/cifs/smb2pdu.o
fs/cifs/smb2pdu.c: In function ‘SMB2_negotiate’:
fs/cifs/smb2pdu.c:822:16: warning: array subscript 1 is above array bounds
of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
822 | req->Dialects[1] = cpu_to_le16(SMB30_PROT_ID);
| ~~~~~~~~~~~~~^~~
fs/cifs/smb2pdu.c:823:16: warning: array subscript 2 is above array bounds
of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
823 | req->Dialects[2] = cpu_to_le16(SMB302_PROT_ID);
| ~~~~~~~~~~~~~^~~
fs/cifs/smb2pdu.c:824:16: warning: array subscript 3 is above array bounds
of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
824 | req->Dialects[3] = cpu_to_le16(SMB311_PROT_ID);
| ~~~~~~~~~~~~~^~~
fs/cifs/smb2pdu.c:816:16: warning: array subscript 1 is above array bounds
of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
816 | req->Dialects[1] = cpu_to_le16(SMB302_PROT_ID);
| ~~~~~~~~~~~~~^~~
At the time, the size of array _Dialects_ was changed from 1 to 3 in struct
validate_negotiate_info_req, and then in 2019 it was changed from 3 to 4,
but those changes were never made in struct smb2_negotiate_req, which has
led to a 3 and a half years old out-of-bounds bug in function
SMB2_negotiate() (fs/cifs/smb2pdu.c).
Fix this by increasing the size of array _Dialects_ in struct
smb2_negotiate_req to 4.
Fixes: 9764c02fcb ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)")
Fixes: d5c7076b77 ("smb3: add smb3.1.1 to default dialect list")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The new mount API requires additional changes to how DFS
is handled. Additional testing of DFS uncovered problems
with domain based DFS referrals (a follow on patch addresses
DFS links) which this patch addresses.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
During additional testing of the updated cifs.ko with the
new mount API support, we found a few additional cases where
we were logging errors, but not returning them to the user.
For example:
a) invalid security mechanisms
b) invalid cache options
c) unsupported rdma
d) invalid smb dialect requested
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The "prefixpath" mount option needs to be ignored
which was missed in the recent conversion to the
new mount API (prefixpath would be set by the mount
helper if mounting a subdirectory of the root of a
share e.g. //server/share/subdir)
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
In 24e0a1eff9, the noauto and auto options were missed when migrating
to the new mount API. As a result, users with noauto in their fstab
mount options are now unable to mount cifs filesystems, as they'll
receive an "Unknown parameter" error.
This restores the old behaviour of ignoring noauto and auto if they're
given.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Signed-off-by: Adam Harvey <adam@adamharvey.name>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The two helpers inode_permission() and generic_permission() are used by
the vfs to perform basic permission checking by verifying that the
caller is privileged over an inode. In order to handle idmapped mounts
we extend the two helpers with an additional user namespace argument.
On idmapped mounts the two helpers will make sure to map the inode
according to the mount's user namespace and then peform identical
permission checks to inode_permission() and generic_permission(). If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-6-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
RHBZ 1848178
The original intent of returning an error in this function
in the patch:
"CIFS: Mask off signals when sending SMB packets"
was to avoid interrupting packet send in the middle of
sending the data (and thus breaking an SMB connection),
but we also don't want to fail the request for non-fatal
signals even before we have had a chance to try to
send it (the reported problem could be reproduced e.g.
by exiting a child process when the parent process was in
the midst of calling futimens to update a file's timestamps).
In addition, since the signal may remain pending when we enter the
sending loop, we may end up not sending the whole packet before
TCP buffers become full. In this case the code returns -EINTR
but what we need here is to return -ERESTARTSYS instead to
allow system calls to be restarted.
Fixes: b30c74c73c ("CIFS: Mask off signals when sending SMB packets")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the follow warnings:
./fs/cifs/connect.c: WARNING: Comparison of 0/1 to bool variable
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the following coccicheck warnings:
./fs/cifs/connect.c:3386:2-21: WARNING: Assignment of 0/1 to
bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use "flexible array members"[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/
deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the following coccicheck warning:
./fs/cifs/connect.c:3740:6-21: WARNING: Comparison of 0/1 to bool
variable
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
'rc' in smb3_fs_context_dup is not used and can be removed.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Retry close command if it gets interrupted to not leak open handles on
the server.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reported-by: Duncan Findlay <duncf@duncf.ca>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Fixes: 6988a619f5 ("cifs: allow syscalls to be restarted in __smb_send_rqst()")
Cc: stable@vger.kernel.org
Reviewd-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
clang static analysis reports this problem
dfs_cache.c:591:2: warning: Argument to kfree() is a constant address
(18446744073709551614), which is not memory allocated by malloc()
kfree(vi);
^~~~~~~~~
In dfs_cache_del_vol() the volume info pointer 'vi' being freed
is the return of a call to find_vol(). The large constant address
is find_vol() returning an error.
Add an error check to dfs_cache_del_vol() similar to the one done
in dfs_cache_update_vol().
Fixes: 54be1f6c1c ("cifs: Add DFS cache routines")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
CC: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix passing of the additional security info via version
operations. Force new open when getting SACL and avoid
reuse of files that were previously open without
sufficient privileges to access SACLs.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add SYSTEM_SECURITY access flag and use with smb2 when opening
files for getting/setting SACLs. Add "system.cifs_ntsd_full"
extended attribute to allow user-space access to the functionality.
Avoid multiple server calls when setting owner, DACL, and SACL.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The patch 7d6535b72042: "cifs: Simplify reconnect code when dfs
upcall is enabled" leads to the following static checker warning:
fs/cifs/connect.c:160 reconn_set_next_dfs_target()
error: 'server->hostname' dereferencing possible ERR_PTR()
Avoid dereferencing the error pointer by early returning on error
condition.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
This code is slightly nicer if we flip the cifs_sockaddr_equal()
around and pull all the code in one tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are three error paths which need to unlock before returning.
Fixes: 121d947d4f ("cifs: Handle witness client move notification")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
The unlock is done in the caller, this is a stray which leads to a
double unlock bug.
Fixes: bf80e5d425 ("cifs: Send witness register and unregister commands to userspace daemon")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=YiLC
-----END PGP SIGNATURE-----
Merge tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"The largest part are for support of the newer mount API which has been
needed for cifs/smb3 mounts for a long time due to the new API's
better handling of remount, and better error reporting. There are
three additional small cleanup patches for this being tested, that are
not included yet.
This series also includes addition of support for the SMB3 witness
protocol which can provide important notifications from the server to
client on server address or export or network changes. This can be
useful for example in order to be notified before the failure - when a
server's IP address changes (in the future it will allow us to support
server notifications of when a share is moved).
It also includes three patches for stable e.g. some that better handle
some confusing error messages during session establishment"
* tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (55 commits)
cifs: update internal module version number
cifs: Fix support for remount when not changing rsize/wsize
cifs: handle "guest" mount parameter
cifs: correct four aliased mount parms to allow use of previous names
cifs: Tracepoints and logs for tracing credit changes.
cifs: fix use after free in cifs_smb3_do_mount()
cifs: fix rsize/wsize to be negotiated values
cifs: Fix some error pointers handling detected by static checker
smb3: remind users that witness protocol is experimental
cifs: update super_operations to show_devname
cifs: fix uninitialized variable in smb3_fs_context_parse_param
cifs: update mnt_cifs_flags during reconfigure
cifs: move update of flags into a separate function
cifs: remove ctx argument from cifs_setup_cifs_sb
cifs: do not allow changing posix_paths during remount
cifs: uncomplicate printing the iocharset parameter
cifs: don't create a temp nls in cifs_setup_ipc
cifs: simplify handling of cifs_sb/ctx->local_nls
cifs: we do not allow changing username/password/unc/... during remount
cifs: add initial reconfigure support
...
When remounting with the new mount API, we need to set
rsize and wsize to the previous values if they are not passed
in on the remount. Otherwise they get set to zero which breaks
xfstest 452 for example.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
With the new mount API it can not handle empty strings for
mount parms ("guest" is mapped in userspace mount helper to
"user=") so we have to special case it as we do for the
password mount parm.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
The updates to the new mount API created aliases for some
mount parms e.g.
esize, idsfromsid, modefromsid, signloosely
as
"min_enc_offload", "setuidfromacl", "modesid", "ignore_signature"
but did not add back in the original name expected by test cases
and current users. It also had incorrect names for a few
less used mount parms.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
There is at least one suspected bug in crediting changes in cifs.ko
which has come up a few times in the discussions and in a customer
case.
This change adds tracepoints to the code which modifies the server
credit values in any way. The goal is to be able to track the changes
to the credit values of the session to be able to catch when there is
a crediting bug.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Also make sure these are displayed in /proc/mounts
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
* extract_hostname() and extract_sharename() never return NULL, so
use IS_ERR() instead of IS_ERR_OR_NULL() in cifs_find_swn_reg(). If
any of these functions return an error, then return an error pointer
instead of NULL.
* Change cifs_find_swn_reg() function to always return a valid pointer
or an error pointer, instead of returning NULL if the registration
is not found.
* Finally update cifs_find_swn_reg() callers to check for -EEXIST
instead of NULL.
* In cifs_get_swn_reg() the swnreg idr mutex was not unlocked in the
error path of cifs_find_swn_reg() call.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
warn_once when using the witness protocol that it is experimental
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
This is needed so that we display the correct //server/share vs
\\server\share in /proc/mounts for the device name (in the new
mount API).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Addresses an issue noted by the kernel test robot
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Many mount flags (e.g. for noperm, noxattr, nobrl,
cifsacl, mfsymlinks and more) can be updated now.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This function will set/clear flags that can be changed during mount or remount
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is no need to load the default nls to check if the iocharset argument
was specified or not since we have it in cifs_sb->ctx
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
just use the one that is already available in ctx
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Only load/unload local_nls from cifs_sb and just make the ctx
contain a pointer to cifs_sb->ctx.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
and rename it to smb3_cleanup_fs_context[_content]
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add missing sentinel to smb3_fs_parameters. This fixes ARM32 kernel
crashing once CIFS is registered.
Unable to handle kernel paging request at virtual address 33626d73
...
(strcmp) from (fs_validate_description)
(fs_validate_description) from (register_filesystem)
(register_filesystem) from (init_cifs [cifs])
(init_cifs [cifs]) from (do_one_initcall)
(do_one_initcall) from (do_init_module)
(do_init_module) from (load_module)
(load_module) from (sys_finit_module)
(sys_finit_module) from (ret_fast_syscal)
Fixes: e07724d1cf38 ("cifs: switch to new mount api")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This message is sent to tell a client to close its current connection
and connect to the specified address.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can already access these from cifs_sb->ctx so we no longer need
a local copy in cifs_sb.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Correct some trivial warnings caused when new file unc.c
was created. For example:
In file included from fs/cifs/unc.c:11:
>> fs/cifs/cifsproto.h:44:28: warning: 'struct TCP_Server_Info' declared inside parameter list will not be visible outside of this definition or declaration
44 | extern int smb_send(struct TCP_Server_Info *, struct smb_hdr *,
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When compiling with W=1 I noticed various functions that
did not follow proper style in describing (in the comments)
the parameters passed in to the function. For example:
fs/cifs/inode.c:2236: warning: Function parameter or member 'mode' not described in 'cifs_wait_bit_killable'
I did not address the style warnings in two of the six files
(connect.c and misc.c) in order to reduce risk of merge
conflict with pending patches. We can update those later.
Signed-off-by: Steve French <stfrench@microsoft.com>
Some witness notifications, like client move, tell the client to
reconnect to a specific IP address. In this situation the DFS failover
code path has to be skipped so clean up as much as possible the
cifs_reconnect() code.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the daemon starts after mounting a share, or if it crashes, this
provides a mechanism to register again.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
+ Indicate if witness feature is supported
+ Indicate if witness is used when dumping tcons
+ Dumps witness registrations. Example:
Witness registrations:
Id: 1 Refs: 1 Network name: 'fs.fover.ad'(y) Share name: 'share1'(y) \
Ip address: 192.168.103.200(n)
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
+ Set a handler for the witness notification messages received from the
userspace daemon.
+ Handle the resource state change notification. When the resource
becomes unavailable or available set the tcp status to
CifsNeedReconnect for all channels.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
+ Define the generic netlink family commands and message attributes to
communicate with the userspace daemon
+ The register and unregister commands are sent when connecting or
disconnecting a tree. The witness registration keeps a pointer to
the tcon and has the same lifetime.
+ Each registration has an id allocated by an IDR. This id is sent to the
userspace daemon in the register command, and will be included in the
notification messages from the userspace daemon to retrieve from the
IDR the matching registration.
+ The authentication information is bundled in the register message.
If kerberos is used the message just carries a flag.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Correct references to fs/cifs/README which has been replaced by
Documentation/filesystems/admin-guide/cifs/usage.rst, and also
correct a typo.
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add 'witness' mount option to register for witness notifications.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Register a new generic netlink family to talk to the witness service
userspace daemon.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
misc.c was getting a little large, move two of the UNC parsing relating
functions to a new C file unc.c which makes the coding of the
upcoming witness protocol patch series a little cleaner as well.
Suggested-by: Rafal Szczesniak <rafal@elbingbrewery.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the function to misc.c
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the function to misc.c and give it a public header.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
as we now have a full smb3_fs_context as part of the cifs superblock
we no longer need a local copy of the mount options and can just
reference the copy in the smb3_fs_context.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
and populate it during mount in cifs_smb3_do_mount()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
none of the callers use this argument any more.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
See Documentation/filesystems/mount_api.rst for details on new mount API
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
No change to logic, just moving the enum of cifs mount parms into a header
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Continue restructuring needed for support of new mount API
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Harmonize and change all such variables to 'ctx', where possible.
No changes to actual logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the negotiate protocol preauth context, the server is not required
to populate the salt (although it is done by most servers) so do
not warn on mount.
We retain the checks (warn) that the preauth context is the minimum
size and that the salt does not exceed DataLength of the SMB response.
Although we use the defaults in the case that the preauth context
response is invalid, these checks may be useful in the future
as servers add support for additional mechanisms.
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Trivial changes to clarify confusing comment about
SPNEGO blog (and also one length comparisons in negotiate
context parsing).
Suggested-by: Tom Talpey <tom@talpey.com>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For the cifsacl mount option, we did not support sticky bits.
With this patch, we do support it, by setting the DELETE_CHILD perm
on the directory only for the owner user. When sticky bit is not
enabled, allow DELETE_CHILD perm for everyone.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With the "cifsacl" mount option, the mode bits set on the file/dir
is converted to corresponding ACEs in DACL. However, only the
ALLOWED ACEs were being set for "owner" and "group" SIDs. Since
owner is a subset of group, and group is a subset of
everyone/world SID, in order to properly emulate unix perm groups,
we need to add DENIED ACEs. If we don't do that, "owner" and "group"
SIDs could get more access rights than they should. Which is what
was happening. This fixes it.
We try to keep the "preferred" order of ACEs, i.e. DENYs followed
by ALLOWs. However, for a small subset of cases we cannot
maintain the preferred order. In that case, we'll end up with the
DENY ACE for group after the ALLOW for the owner.
If owner SID == group SID, use the more restrictive
among the two perm bits and convert them to ACEs.
Also, for reverse mapping, i.e. to convert ACL to unix perm bits,
for the "others" bits, we needed to add the masked bits of the
owner and group masks to others mask.
Updated version of patch fixes a problem noted by the kernel
test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Azure does not send an SPNEGO blob in the negotiate protocol response,
so we shouldn't assume that it is there when validating the location
of the first negotiate context. This avoids the potential confusing
mount warning:
CIFS: Invalid negotiate context offset
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mounts to Azure cause an unneeded warning message in dmesg
"CIFS: VFS: parse_server_interfaces: incomplete interface info"
Azure rounds up the size (by 8 additional bytes, to a
16 byte boundary) of the structure returned on the query
of the server interfaces at mount time. This is permissible
even though different than other servers so do not log a warning
if query network interfaces response is only rounded up by 8
bytes or fewer.
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break/goto statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with "idsfromsid" mount option, Azure
corrupted the owner SIDs due to excessive padding
caused by placing the owner fields at the end of the
security descriptor on create. Placing owners at the
front of the security descriptor (rather than the end)
is also safer, as the number of ACEs (that follow it)
are variable.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Suggested-by: Rohith Surabattula <rohiths@microsoft.com>
CC: Stable <stable@vger.kernel.org> # v5.8
Signed-off-by: Steve French <stfrench@microsoft.com>
In some scenarios (DFS and BAD_NETWORK_NAME) set_root_set() can be
called with a NULL ses->tcon_ipc.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For an operation compounded with an SMB2 CREATE request, client must set
COMPOUND_FID(0xFFFFFFFFFFFFFFFF) to FileID field of smb2 ioctl.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Fixes: 2e4564b31b ("smb3: add support stat of WSL reparse points for special file types")
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch fixes a potential use-after-free bug in
cifs_echo_request().
For instance,
thread 1
--------
cifs_demultiplex_thread()
clean_demultiplex_info()
kfree(server)
thread 2 (workqueue)
--------
apic_timer_interrupt()
smp_apic_timer_interrupt()
irq_exit()
__do_softirq()
run_timer_softirq()
call_timer_fn()
cifs_echo_request() <- use-after-free in server ptr
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A customer has reported that several files in their multi-threaded app
were left with size of 0 because most of the read(2) calls returned
-EINTR and they assumed no bytes were read. Obviously, they could
have fixed it by simply retrying on -EINTR.
We noticed that most of the -EINTR on read(2) were due to real-time
signals sent by glibc to process wide credential changes (SIGRT_1),
and its signal handler had been established with SA_RESTART, in which
case those calls could have been automatically restarted by the
kernel.
Let the kernel decide to whether or not restart the syscalls when
there is a signal pending in __smb_send_rqst() by returning
-ERESTARTSYS. If it can't, it will return -EINTR anyway.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mid callback needs to be called only when valid data is
read into pages.
These patches address a problem found during decryption offload:
CIFS: VFS: trying to dequeue a deleted mid
that could cause a refcount use after free:
Workqueue: smb3decryptd smb2_decrypt_offload [cifs]
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
When reconnect happens Mid queue can be corrupted when both
demultiplex and offload thread try to dequeue the MID from the
pending list.
These patches address a problem found during decryption offload:
CIFS: VFS: trying to dequeue a deleted mid
that could cause a refcount use after free:
Workqueue: smb3decryptd smb2_decrypt_offload [cifs]
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
Add some structures and defines that were recently added to
the protocol documentation (see MS-FSCC sections 2.3.29-2.3.34).
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix two unused variables in commit
"add support for stat of WSL reparse points for special file types"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The IO_REPARSE_TAG_LX_ tags originally were used by WSL but they
are preferred by the Linux client in some cases since, unlike
the NFS reparse tag (or EAs), they don't require an extra query
to determine which type of special file they represent.
Add support for readdir to recognize special file types of
FIFO, SOCKET, CHAR, BLOCK and SYMLINK. This can be tested
by creating these special files in WSL Linux and then
sharing that location on the Windows server and mounting
to the Windows server to access them.
Prior to this patch all of the special files would show up
as being of type 'file' but with this patch they can be seen
with the correct file type as can be seen below:
brwxr-xr-x 1 root root 0, 0 Oct 21 17:10 block
crwxr-xr-x 1 root root 0, 0 Oct 21 17:46 char
drwxr-xr-x 2 root root 0 Oct 21 18:27 dir
prwxr-xr-x 1 root root 0 Oct 21 16:21 fifo
-rwxr-xr-x 1 root root 0 Oct 21 15:48 file
lrwxr-xr-x 1 root root 0 Oct 21 15:52 symlink-to-file
TODO: go through all documented reparse tags to see if we can
reasonably map some of them to directories vs. files vs. symlinks
and also add support for device numbers for block and char
devices.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
The "end" pointer is either NULL or it points to the next byte to parse.
If there isn't a next byte then dereferencing "end" is an off-by-one out
of bounds error. And, of course, if it's NULL that leads to an Oops.
Printing "*end" doesn't seem very useful so let's delete this code.
Also for the last debug statement, I noticed that it should be printing
"sequence_end" instead of "end" so fix that as well.
Reported-by: Dominik Maier <dmaier@sect.tu-berlin.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This and related patches which move mount related
code to fs_context.c has the advantage of
shriking the code in fs/cifs/connect.c (which had
the second most lines of code of any of the files
in cifs.ko and was getting harder to read due
to its size) and will also make it easier to
switch over to the new mount API in the future.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Helps to shrink connect.c and make it more readable
by moving mount related code to fs_context.c and
fs_context.h
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This patch moves the parsing of security mount options into
fs_context.ch. There are no changes to any logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This will make it easier in the future, but also will allow us to
shrink connect.c which is getting too big, and harder to read
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
To servers which do not support directory leases (e.g. Samba)
it is wasteful to try to open_shroot (ie attempt to cache the
root directory handle). Skip attempt to open_shroot when
server does not indicate support for directory leases.
Cuts the number of requests on mount from 17 to 15, and
cuts the number of requests on stat of the root directory
from 4 to 3.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> # v5.1+
When mounting with modefromsid mount option, it was possible to
get the error on stat of a fifo or char or block device:
"cannot stat <filename>: Operation not supported"
Special devices can be stored as reparse points by some servers
(e.g. Windows NFS server and when using the SMB3.1.1 POSIX
Extensions) but when the modefromsid mount option is used
the client attempts to get the ACL for the file which requires
opening with OPEN_REPARSE_POINT create option.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Can be helpful in debugging mount and reconnect issues
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
TCP server info field server->total_read is modified in parallel by
demultiplex thread and decrypt offload worker thread. server->total_read
is used in calculation to discard the remaining data of PDU which is
not read into memory.
Because of parallel modification, server->total_read can get corrupted
and can result in discarding the valid data of next PDU.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't populate const array smb3_create_tag_posix on the stack but
instead make it static. Makes the object code smaller by 50 bytes.
Before:
text data bss dec hex filename
150184 47167 0 197351 302e7 fs/cifs/smb2pdu.o
After:
text data bss dec hex filename
150070 47231 0 197301 302b5 fs/cifs/smb2pdu.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We were setting the uid/gid to the default in each dir entry
in the parsing of the POSIX query dir response, rather
than attempting to map the user and group SIDs returned by
the server to well known SIDs (or upcall if not found).
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 crediting is used for flow control, and it can be useful to
trace for problem determination how many credits were acquired
and for which operation.
Here is an example ("trace-cmd record -e *add_credits"):
cifsd-9522 [010] .... 5995.202712: smb3_add_credits:
server=localhost current_mid=0x12 credits=373 credits_to_add=10
cifsd-9522 [010] .... 5995.204040: smb3_add_credits:
server=localhost current_mid=0x15 credits=400 credits_to_add=30
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are cases where the server can return a cipher type of 0 and
it not be an error. For example server supported no encryption types
(e.g. server completely disabled encryption), or the server and
client didn't support any encryption types in common (e.g. if a
server only supported AES256_CCM). In those cases encryption would
not be supported, but that can be ok if the client did not require
encryption on mount and it should not return an error.
In the case in which mount requested encryption ("seal" on mount)
then checks later on during tree connection will return the proper
rc, but if seal was not requested by client, since server is allowed
to return 0 to indicate no supported cipher, we should not fail mount.
Reported-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In crypt_message, when smb2_get_enc_key returns error, we need to
return the error back to the caller. If not, we end up processing
the message further, causing a kernel oops due to unwarranted access
of memory.
Call Trace:
smb3_receive_transform+0x120/0x870 [cifs]
cifs_demultiplex_thread+0xb53/0xc20 [cifs]
? cifs_handle_standard+0x190/0x190 [cifs]
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that 256 bit encryption can be negotiated, update
names of the nonces to match the updated official protocol
documentation (e.g. AES_GCM_NONCE instead of AES_128GCM_NONCE)
since they apply to both 128 bit and 256 bit encryption.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
If server does not support AES-256-GCM and it was required on mount, print
warning message. Also log and return a different error message (EOPNOTSUPP)
when encryption mechanism is not supported vs the case when an unknown
unrequested encryption mechanism could be returned (EINVAL).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add new module load parameter enable_gcm_256. If set, then add
AES-256-GCM (strongest encryption type) to the list of encryption
types requested. Put it in the list as the second choice (since
AES-128-GCM is faster and much more broadly supported by
SMB3 servers). To make this stronger encryption type, GCM-256,
required (the first and only choice, you would use module parameter
"require_gcm_256."
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add new module load parameter require_gcm_256. If set, then only
request AES-256-GCM (strongest encryption type).
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically the same as STATUS_LOGON_FAILURE,
but after the account is locked out.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently there are three supported signing algorithms
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1848178
Some calls that set attributes, like utimensat(), are not supposed to return
-EINTR and thus do not have handlers for this in glibc which causes us
to leak -EINTR to the applications which are also unprepared to handle it.
For example tar will break if utimensat() return -EINTR and abort unpacking
the archive. Other applications may break too.
To handle this we add checks, and retry, for -EINTR in cifs_setattr()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently STATUS_IO_TIMEOUT is not treated as retriable error.
It is currently mapped to ETIMEDOUT and returned to userspace
for most system calls. STATUS_IO_TIMEOUT is returned by server
in case of unavailability or throttling errors.
This patch will map the STATUS_IO_TIMEOUT to EAGAIN, so that it
can be retried. Also, added a check to drop the connection to
not overload the server in case of ongoing unavailability.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cleanup patch for followon to cache additional information for the root directory
when directory lease held.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cleanup patch for followon to cache additional information for the root directory
when directory lease held.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MS-SMB2 was updated recently to include new protocol definitions for
updated compression payload header and new RDMA transform capabilities
Update structure definitions in smb2pdu.h to match
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
In encryption capabilities negotiate context can now request
AES256 GCM or CCM
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
When converting trailing spaces and periods in paths, do so
for every component of the path, not just the last component.
If the conversion is not done for every path component, then
subsequent operations in directories with trailing spaces or
periods (e.g. create(), mkdir()) will fail with ENOENT. This
is because on the server, the directory will have a special
symbol in its name, and the client needs to provide the same.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On setxattr() syscall path due to an apprent typo the size of a dynamically
allocated memory chunk for storing struct smb2_file_full_ea_info object is
computed incorrectly, to be more precise the first addend is the size of
a pointer instead of the wanted object size. Coincidentally it makes no
difference on 64-bit platforms, however on 32-bit targets the following
memcpy() writes 4 bytes of data outside of the dynamically allocated memory.
=============================================================================
BUG kmalloc-16 (Not tainted): Redzone overwritten
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc
INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201
INFO: Object 0x6f171df3 @offset=352 fp=0x00000000
Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi
Redzone 79e69a6f: 73 68 32 0a sh2.
Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
dump_stack+0x54/0x6e
print_trailer+0x12c/0x134
check_bytes_and_report.cold+0x3e/0x69
check_object+0x18c/0x250
free_debug_processing+0xfe/0x230
__slab_free+0x1c0/0x300
kfree+0x1d3/0x220
smb2_set_ea+0x27d/0x540
cifs_xattr_set+0x57f/0x620
__vfs_setxattr+0x4e/0x60
__vfs_setxattr_noperm+0x4e/0x100
__vfs_setxattr_locked+0xae/0xd0
vfs_setxattr+0x4e/0xe0
setxattr+0x12c/0x1a0
path_setxattr+0xa4/0xc0
__ia32_sys_lsetxattr+0x1d/0x20
__do_fast_syscall_32+0x40/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
Fixes: 5517554e43 ("cifs: Add support for writing attributes on SMB2+")
Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RHBZ: 1871246
If during cifs_lookup()/get_inode_info() we encounter a DFS link
and we use the cifsacl or modefromsid mount options we must suppress
any -EREMOTE errors that triggers or else we will not be able to follow
the DFS link and automount the target.
This fixes an issue with modefromsid/cifsacl where these mountoptions
would break DFS and we would no longer be able to access the share.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=0PxR
-----END PGP SIGNATURE-----
Merge tag '5.9-rc2-smb-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cfis fix from Steve French:
"DFS fix for referral problem when using SMB1"
* tag '5.9-rc2-smb-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix check of tcon dfs in smb1
For SMB1, the DFS flag should be checked against tcon->Flags rather
than tcon->share_flags. While at it, add an is_tcon_dfs() helper to
check for DFS capability in a more generic way.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
-----BEGIN PGP SIGNATURE-----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=FHq0
-----END PGP SIGNATURE-----
Merge tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes, one for stable fixing mkdir path with
the 'idsfromsid' mount option"
* tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Fix mkdir when idsfromsid configured on mount
cifs: Convert to use the fallthrough macro
cifs: Fix an error pointer dereference in cifs_mount()
mkdir uses a compounded create operation which was not setting
the security descriptor on create of a directory. Fix so
mkdir now sets the mode and owner info properly when idsfromsid
and modefromsid are configured on the mount.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> # v5.8
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Convert the uses of fallthrough comments to fallthrough macro.
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The error handling calls kfree(full_path) so we can't let it be a NULL
pointer. There used to be a NULL assignment here but we accidentally
deleted it. Add it back.
Fixes: 7efd081582 ("cifs: document and cleanup dfs mount")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
-----BEGIN PGP SIGNATURE-----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=X8aQ
-----END PGP SIGNATURE-----
Merge tag '5.9-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"16 cifs/smb3 fixes, about half DFS related, two fixes for stable.
Still working on and testing an additional set of fixes (including
updates to mount, and some fallocate scenario improvements) for later
in the merge window"
* tag '5.9-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: document and cleanup dfs mount
cifs: only update prefix path of DFS links in cifs_tree_connect()
cifs: fix double free error on share and prefix
cifs: handle RESP_GET_DFS_REFERRAL.PathConsumed in reconnect
cifs: handle empty list of targets in cifs_reconnect()
cifs: rename reconn_inval_dfs_target()
cifs: reduce number of referral requests in DFS link lookups
cifs: merge __{cifs,smb2}_reconnect[_tcon]() into cifs_tree_connect()
cifs: convert to use be32_add_cpu()
cifs: delete duplicated words in header files
cifs: Remove the superfluous break
cifs: smb1: Try failing back to SetFileInfo if SetPathInfo fails
cifs`: handle ERRBaduid for SMB1
cifs: remove unused variable 'server'
smb3: warn on confusing error scenario with sec=krb5
cifs: Fix leak when handling lease break for cached root fid
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
cifs_mount() for DFS mounts is for a long time way too complex to
follow, mostly because it lacks some documentation, does a lot of
operations like resolving DFS roots and links, checking for path
components, perform failover, crap code, etc.
Besides adding some documentation to it, do some cleanup and ensure
that the following is implemented and supported:
* non-DFS mounts
* DFS failover
* DFS root mounts
- tcon and cifs_sb must contain DFS path (NOT including prefix)
- if prefix path, then save it in cifs_sb and it must not be
changed
* DFS link mounts
- tcon and cifs_sb must contain DFS path (including prefix)
- if prefix path, then save it in cifs_sb and it may be changed
* prevent recursion on broken link referrals (MAX_NESTED_LINKS)
* check every path component of the currently resolved
target (including prefix), and chase them accordingly
* make sure that DFS referrals go through newly resolved root
servers
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For DFS root mounts that contain a prefix path, do not change them
after failover.
E.g., if the user mounts
//srvA/root/dir1
and then lost connection to srvA, it will reconnect to
//srvB/root/dir1
In case of DFS links, which may resolve to different prefix paths
depending on their list of targets, the following must be supported:
- mount //srvA/root/link/bar
- connect to //srvA/share
- set prefix path to "bar"
- lost connection to srvA
- reconnect to next target: //srvB/share/foo
- set new prefix path to "foo/bar"
In cifs_tree_connect(), check the server_type field of the cached DFS
referral to determine whether or not prefix path should be updated.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently if the call dfs_cache_get_tgt_share fails we cannot
fully guarantee that share and prefix are set to NULL and the
next iteration of the loop can end up potentially double freeing
these pointers. Since the semantics of dfs_cache_get_tgt_share
are ambiguous for failure cases with the setting of share and
prefix (currently now and the possibly the future), it seems
prudent to set the pointers to NULL when the objects are
free'd to avoid any double frees.
Addresses-Coverity: ("Double free")
Fixes: 96296c946a2a ("cifs: handle RESP_GET_DFS_REFERRAL.PathConsumed in reconnect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Use PathConsumed field when parsing prefixes of referral paths that
either match a cache entry or are a complete prefix path of an
existing entry.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In case there were no cached DFS referrals in
reconn_setup_dfs_targets(), set cifs_sb to NULL prior to calling
reconn_set_next_dfs_target() so it would not try to access an empty
tgt_list.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This function has nothing to do with *invalidation* but setting up the
next target server from a cached referral.
Rename it to reconn_set_next_dfs_target(). While at it, get rid of
some meaningless checks.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When looking up the DFS cache with a referral path that has more than
two path components, and is a complete prefix of an existing cache
entry, do not request another referral and just return the matched
entry as specified in MS-DFSC 3.2.5.5 Receiving a Root Referral
Request or Link Referral Request.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
They were identical execpt to CIFSTCon() vs. SMB2_tcon().
These are also available via ops->tree_connect().
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French