During host/guest switch (like in kvm_arch_vcpu_ioctl_run()), the kernel
swaps the fpu between host/guest contexts, by using fpu_swap_kvm_fpstate().
When xsave feature is available, the fpu swap is done by:
- xsave(s) instruction, with guest's fpstate->xfeatures as mask, is used
to store the current state of the fpu registers to a buffer.
- xrstor(s) instruction, with (fpu_kernel_cfg.max_features &
XFEATURE_MASK_FPSTATE) as mask, is used to put the buffer into fpu regs.
For xsave(s) the mask is used to limit what parts of the fpu regs will
be copied to the buffer. Likewise on xrstor(s), the mask is used to
limit what parts of the fpu regs will be changed.
The mask for xsave(s), the guest's fpstate->xfeatures, is defined on
kvm_arch_vcpu_create(), which (in summary) sets it to all features
supported by the cpu which are enabled on kernel config.
This means that xsave(s) will save to guest buffer all the fpu regs
contents the cpu has enabled when the guest is paused, even if they
are not used.
This would not be an issue, if xrstor(s) would also do that.
xrstor(s)'s mask for host/guest swap is basically every valid feature
contained in kernel config, except XFEATURE_MASK_PKRU.
Accordingto kernel src, it is instead switched in switch_to() and
flush_thread().
Then, the following happens with a host supporting PKRU starts a
guest that does not support it:
1 - Host has XFEATURE_MASK_PKRU set. 1st switch to guest,
2 - xsave(s) fpu regs to host fpustate (buffer has XFEATURE_MASK_PKRU)
3 - xrstor(s) guest fpustate to fpu regs (fpu regs have XFEATURE_MASK_PKRU)
4 - guest runs, then switch back to host,
5 - xsave(s) fpu regs to guest fpstate (buffer now have XFEATURE_MASK_PKRU)
6 - xrstor(s) host fpstate to fpu regs.
7 - kvm_vcpu_ioctl_x86_get_xsave() copy guest fpstate to userspace (with
XFEATURE_MASK_PKRU, which should not be supported by guest vcpu)
On 5, even though the guest does not support PKRU, it does have the flag
set on guest fpstate, which is transferred to userspace via vcpu ioctl
KVM_GET_XSAVE.
This becomes a problem when the user decides on migrating the above guest
to another machine that does not support PKRU: the new host restores
guest's fpu regs to as they were before (xrstor(s)), but since the new
host don't support PKRU, a general-protection exception ocurs in xrstor(s)
and that crashes the guest.
This can be solved by making the guest's fpstate->user_xfeatures hold
a copy of guest_supported_xcr0. This way, on 7 the only flags copied to
userspace will be the ones compatible to guest requirements, and thus
there will be no issue during migration.
As a bonus, it will also fail if userspace tries to set fpu features
(with the KVM_SET_XSAVE ioctl) that are not compatible to the guest
configuration. Such features will never be returned by KVM_GET_XSAVE
or KVM_GET_XSAVE2.
Also, since kvm_vcpu_after_set_cpuid() now sets fpstate->user_xfeatures,
there is not need to set it in kvm_check_cpuid(). So, change
fpstate_realloc() so it does not touch fpstate->user_xfeatures if a
non-NULL guest_fpu is passed, which is the case when kvm_check_cpuid()
calls it.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20220217053028.96432-2-leobras@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If vcpu has tsc_always_catchup set each request updates pvclock data.
KVM_HC_CLOCK_PAIRING consumers such as ptp_kvm_x86 rely on tsc read on
host's side and do hypercall inside pvclock_read_retry loop leading to
infinite loop in such situation.
v3:
Removed warn
Changed return code to KVM_EFAULT
v2:
Added warn
Signed-off-by: Anton Romanov <romanton@google.com>
Message-Id: <20220216182653.506850-1-romanton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I saw the below splatting after the host suspended and resumed.
WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4
RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
Call Trace:
<TASK>
syscore_resume+0x90/0x340
suspend_devices_and_enter+0xaee/0xe90
pm_suspend.cold+0x36b/0x3c2
state_store+0x82/0xf0
kernfs_fop_write_iter+0x1b6/0x260
new_sync_write+0x258/0x370
vfs_write+0x33f/0x510
ksys_write+0xc9/0x160
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Follow the precedent set by other architectures that support the VCPU
ioctl, KVM_ENABLE_CAP, and advertise the VM extension, KVM_CAP_ENABLE_CAP.
This way, userspace can ensure that KVM_ENABLE_CAP is available on a
vcpu before using it.
Fixes: 5c919412fe ("kvm/x86: Hyper-V synthetic interrupt controller")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220214212950.1776943-1-aaronlewis@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to properly emulate the WFI instruction, KVM reads back
ICH_VMCR_EL2 and enables doorbells for GICv4. These preparations are
necessary in order to recognize pending interrupts in
kvm_arch_vcpu_runnable() and return to the guest. Until recently, this
work was done by kvm_arch_vcpu_{blocking,unblocking}(). Since commit
6109c5a6ab ("KVM: arm64: Move vGIC v4 handling for WFI out arch
callback hook"), these callbacks were gutted and superseded by
kvm_vcpu_wfi().
It is important to note that KVM implements PSCI CPU_SUSPEND calls as
a WFI within the guest. However, the implementation calls directly into
kvm_vcpu_halt(), which skips the needed work done in kvm_vcpu_wfi()
to detect pending interrupts. Fix the issue by calling the WFI helper.
Fixes: 6109c5a6ab ("KVM: arm64: Move vGIC v4 handling for WFI out arch callback hook")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220217101242.3013716-1-oupton@google.com
Commit 2c212e1bae ("KVM: s390: Return error on SIDA memop on normal
guest") fixed the behavior of the SIDA memops for normal guests. It
would be nice to have a way to test whether the current kernel has
the fix applied or not. Thus add a check to the KVM selftests for
these two memops.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220215074824.188440-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Document all currently existing operations, flags and explain under
which circumstances they are available. Document the recently
introduced absolute operations and the storage key protection flag,
as well as the existing SIDA operations.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-10-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Availability of the KVM_CAP_S390_MEM_OP_EXTENSION capability signals that:
* The vcpu MEM_OP IOCTL supports storage key checking.
* The vm MEM_OP IOCTL exists.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-9-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Makes the naming consistent, now that we also have a vm ioctl.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-8-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Channel I/O honors storage keys and is performed on absolute memory.
For I/O emulation user space therefore needs to be able to do key
checked accesses.
The vm IOCTL supports read/write accesses, as well as checking
if an access would succeed.
Unlike relying on KVM_S390_GET_SKEYS for key checking would,
the vm IOCTL performs the check in lockstep with the read or write,
by, ultimately, mapping the access to move instructions that
support key protection checking with a supplied key.
Fetch and storage protection override are not applicable to absolute
accesses and so are not applied as they are when using the vcpu memop.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-7-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
User space needs a mechanism to perform key checked accesses when
emulating instructions.
The key can be passed as an additional argument.
Having an additional argument is flexible, as user space can
pass the guest PSW's key, in order to make an access the same way the
CPU would, or pass another key if necessary.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-6-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Test the emulation of TEST PROTECTION in the presence of storage keys.
Emulation only occurs under certain conditions, one of which is the host
page being protected.
Trigger this by protecting the test pages via mprotect.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-5-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Use the access key operand to check for key protection when
translating guest addresses.
Since the translation code checks for accessing exceptions/error hvas,
we can remove the check here and simplify the control flow.
Keep checking if the memory is read-only even if such memslots are
currently not supported.
handle_tprot was the last user of guest_translate_address,
so remove it.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-4-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Storage key checking had not been implemented for instructions emulated
by KVM. Implement it by enhancing the functions used for guest access,
in particular those making use of access_guest which has been renamed
to access_guest_with_key.
Accesses via access_guest_real should not be key checked.
For actual accesses, key checking is done by
copy_from/to_user_key (which internally uses MVCOS/MVCP/MVCS).
In cases where accessibility is checked without an actual access,
this is performed by getting the storage key and checking if the access
key matches. In both cases, if applicable, storage and fetch protection
override are honored.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-3-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Add copy_from/to_user_key functions, which perform storage key checking.
These functions can be used by KVM for emulating instructions that need
to be key checked.
These functions differ from their non _key counterparts in
include/linux/uaccess.h only in the additional key argument and must be
kept in sync with those.
Since the existing uaccess implementation on s390 makes use of move
instructions that support having an additional access key supplied,
we can implement raw_copy_from/to_user_key by enhancing the
existing implementation.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-2-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Use "avic" instead of "svm" for SVM's all of APICv hooks and make a few
additional funciton name tweaks so that the AVIC functions conform to
their associated kvm_x86_ops hooks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of
a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a
RAW perf event.
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220203014813.2130559-2-jmattson@google.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of
a PerfEvtSeln MSR. Don't drop the high nybble when setting up the
config field of a perf_event_attr structure for a call to
perf_event_create_kernel_counter().
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220203014813.2130559-1-jmattson@google.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If svm_deliver_avic_intr is called just after the target vcpu's AVIC got
inhibited, it might read a stale value of vcpu->arch.apicv_active
which can lead to the target vCPU not noticing the interrupt.
To fix this use load-acquire/store-release so that, if the target vCPU
is IN_GUEST_MODE, we're guaranteed to see a previous disabling of the
AVIC. If AVIC has been disabled in the meanwhile, proceed with the
KVM_REQ_EVENT-based delivery.
Incomplete IPI vmexit has the same races as svm_deliver_avic_intr, and
in fact it can be handled in exactly the same way; the only difference
lies in who has set IRR, whether svm_deliver_interrupt or the processor.
Therefore, svm_complete_interrupt_delivery can be used to fix incomplete
IPI vmexits as well.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SVM has to set IRR for both the AVIC and the software-LAPIC case,
so pull it up to the common function that handles both configurations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check on the current CPU adds an extra level of indentation to
svm_deliver_avic_intr and conflates documentation on what happens
if the vCPU exits (of interest to svm_deliver_avic_intr) and migrates
(only of interest to avic_ring_doorbell, which calls get/put_cpu()).
Extract the wrmsr to a separate function and rewrite the
comment in svm_deliver_avic_intr().
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no vmx_pi_mmio_test file. Remove it to get rid of error while
creation of selftest archive:
rsync: [sender] link_stat "/kselftest/kvm/x86_64/vmx_pi_mmio_test" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 6a58150859 ("selftest: KVM: Add intra host migration tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220210172352.1317554-1-usama.anjum@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix pending state read of a HW interrupt
-----BEGIN PGP SIGNATURE-----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=UV/Z
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.17, take #3
- Fix pending state read of a HW interrupt
It appears that a read access to GIC[DR]_I[CS]PENDRn doesn't always
result in the pending interrupts being accurately reported if they are
mapped to a HW interrupt. This is particularily visible when acking
the timer interrupt and reading the GICR_ISPENDR1 register immediately
after, for example (the interrupt appears as not-pending while it really
is...).
This is because a HW interrupt has its 'active and pending state' kept
in the *physical* distributor, and not in the virtual one, as mandated
by the spec (this is what allows the direct deactivation). The virtual
distributor only caries the pending and active *states* (note the
plural, as these are two independent and non-overlapping states).
Fix it by reading the HW state back, either from the timer itself or
from the distributor if necessary.
Reported-by: Ricardo Koller <ricarkol@google.com>
Tested-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220208123726.3604198-1-maz@kernel.org
Claudio has volunteered to be more involved in the maintainership of
s390 KVM.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220210085310.26388-1-borntraeger@linux.ibm.com
There is a local that contains a pointer to vcpu_vmx already. Just use
that instead to get at the structure directly instead of doing pointer
arithmetic.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220204204705.3538240-8-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new test for Hyper-V nSVM extensions (Hyper-V on KVM) and add
a test for enlightened MSR-Bitmap feature:
- Intercept access to MSR_FS_BASE in L1 and check that this works
with enlightened MSR-Bitmap disabled.
- Enabled enlightened MSR-Bitmap and check that the intercept still works
as expected.
- Intercept access to MSR_GS_BASE but don't clear the corresponding bit
from clean fields mask, KVM is supposed to skip updating MSR-Bitmap02 and
thus the consequent access to the MSR from L2 will not get intercepted.
- Finally, clear the corresponding bit from clean fields mask and check
that access to MSR_GS_BASE is now intercepted.
The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE
is not intercepted for L1. If this ever becomes not true the test will
fail as nested_svm_exit_handled_msr() always checks L1's MSR-Bitmap for
L2 irrespective of clean fields. The behavior is correct as enlightened
MSR-Bitmap feature is just an optimization, KVM is not obliged to ignore
updates when the corresponding bit in clean fields stays clear.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's a copy of 'struct vmcb_control_area' definition in KVM selftests,
update it to allow testing of the newly introduced features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to VMX, allocate memory for MSR-Bitmap and fill in 'msrpm_base_pa'
in VMCB. To use it, tests will need to set INTERCEPT_MSR_PROT interception
along with the required bits in the MSR-Bitmap.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a test for enlightened MSR-Bitmap feature (Hyper-V on KVM):
- Intercept access to MSR_FS_BASE in L1 and check that this works
with enlightened MSR-Bitmap disabled.
- Enabled enlightened MSR-Bitmap and check that the intercept still works
as expected.
- Intercept access to MSR_GS_BASE but don't clear the corresponding bit
from 'hv_clean_fields', KVM is supposed to skip updating MSR-Bitmap02 and
thus the consequent access to the MSR from L2 will not get intercepted.
- Finally, clear the corresponding bit from 'hv_clean_fields' and check
that access to MSR_GS_BASE is now intercepted.
The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE
is not intercepted for L1. If this ever becomes not true the test will
fail as nested_vmx_exit_handled_msr() always checks L1's MSR-Bitmap for
L2 irrespective of 'hv_clean_fields'. The behavior is correct as
enlightened MSR-Bitmap feature is just an optimization, KVM is not obliged
to ignore updates when the corresponding bit in 'hv_clean_fields' stays
clear.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of just resetting 'hv_clean_fields' to 0 on every enlightened
vmresume, do the expected cleaning of the corresponding bit on enlightened
vmwrite. Avoid direct access to 'current_evmcs' from evmcs_test to support
the change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID 0x40000000.EAX is now always present as it has Enlightened
MSR-Bitmap feature bit set. Adapt the test accordingly. Opportunistically
add a check for the supported eVMCS version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to nVMX commit 502d2bf5f2 ("KVM: nVMX: Implement Enlightened MSR
Bitmap feature"), add support for the feature for nSVM (Hyper-V on KVM).
Notable differences from nVMX implementation:
- As the feature uses SW reserved fields in VMCB control, KVM needs to
make sure it's dealing with a Hyper-V guest (kvm_hv_hypercall_enabled()).
- 'msrpm_base_pa' needs to be always be overwritten in
nested_svm_vmrun_msrpm(), even when the update is skipped. As an
optimization, nested_vmcb02_prepare_control() copies it from VMCB01
so when MSR-Bitmap feature for L2 is disabled nothing needs to be done.
- 'struct vmcb_ctrl_area_cached' needs to be extended with clean
fields/sw reserved data and __nested_copy_vmcb_control_to_cache() needs to
copy it so nested_svm_vmrun_msrpm() can use it later.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to implementing Enlightened MSR-Bitmap feature for Hyper-V
on KVM, split off the required definitions into common 'svm/hyperv.h'
header.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for using kvm_hv_hypercall_enabled() from SVM code, make
it static inline to avoid the need to export it. The function is a
simple check with only two call sites currently.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to nVMX commit ed2a4800ae ("KVM: nVMX: Track whether changes in
L0 require MSR bitmap for L2 to be rebuilt"), introduce a flag to keep
track of whether MSR bitmap for L2 needs to be rebuilt due to changes in
MSR bitmap for L1 or switching to a different L2.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220202095100.129834-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to dirty_log_perf_test.c to disable
KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE and KVM_DIRTY_LOG_INITIALLY_SET so
the legacy dirty logging code path can be tested.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-19-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a tracepoint that records whenever KVM eagerly splits a huge page
and the error status of the split to indicate if it succeeded or failed
and why.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-18-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using KVM_DIRTY_LOG_INITIALLY_SET, huge pages are not
write-protected when dirty logging is enabled on the memslot. Instead
they are write-protected once userspace invokes KVM_CLEAR_DIRTY_LOG for
the first time and only for the specific sub-region being cleared.
Enhance KVM_CLEAR_DIRTY_LOG to also try to split huge pages prior to
write-protecting to avoid causing write-protection faults on vCPU
threads. This also allows userspace to smear the cost of huge page
splitting across multiple ioctls, rather than splitting the entire
memslot as is the case when initially-all-set is not used.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-17-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When dirty logging is enabled without initially-all-set, try to split
all huge pages in the memslot down to 4KB pages so that vCPUs do not
have to take expensive write-protection faults to split huge pages.
Eager page splitting is best-effort only. This commit only adds the
support for the TDP MMU, and even there splitting may fail due to out
of memory conditions. Failures to split a huge page is fine from a
correctness standpoint because KVM will always follow up splitting by
write-protecting any remaining huge pages.
Eager page splitting moves the cost of splitting huge pages off of the
vCPU threads and onto the thread enabling dirty logging on the memslot.
This is useful because:
1. Splitting on the vCPU thread interrupts vCPUs execution and is
disruptive to customers whereas splitting on VM ioctl threads can
run in parallel with vCPU execution.
2. Splitting all huge pages at once is more efficient because it does
not require performing VM-exit handling or walking the page table for
every 4KiB page in the memslot, and greatly reduces the amount of
contention on the mmu_lock.
For example, when running dirty_log_perf_test with 96 virtual CPUs, 1GiB
per vCPU, and 1GiB HugeTLB memory, the time it takes vCPUs to write to
all of their memory after dirty logging is enabled decreased by 95% from
2.94s to 0.14s.
Eager Page Splitting is over 100x more efficient than the current
implementation of splitting on fault under the read lock. For example,
taking the same workload as above, Eager Page Splitting reduced the CPU
required to split all huge pages from ~270 CPU-seconds ((2.94s - 0.14s)
* 96 vCPU threads) to only 1.55 CPU-seconds.
Eager page splitting does increase the amount of time it takes to enable
dirty logging since it has split all huge pages. For example, the time
it took to enable dirty logging in the 96GiB region of the
aforementioned test increased from 0.001s to 1.55s.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-16-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Separate the allocation of shadow pages from their initialization. This
is in preparation for splitting huge pages outside of the vCPU fault
context, which requires a different allocation mechanism.
No functional changed intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-15-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Derive the page role from the parent shadow page, since the only thing
that changes is the level. This is in preparation for splitting huge
pages during VM-ioctls which do not have access to the vCPU MMU context.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-14-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vCPU's mmu_role already has the correct values for direct,
has_4_byte_gpte, access, and ad_disabled. Remove the code that was
redundantly overwriting these fields with the same values.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-13-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of passing a pointer to the root page table and the root level
separately, pass in a pointer to the root kvm_mmu_page struct. This
reduces the number of arguments by 1, cutting down on line lengths.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-12-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
restore_acc_track_spte() is pure SPTE bit manipulation, making it a good
fit for spte.h. And now that the WARN_ON_ONCE() calls have been removed,
there isn't any good reason to not inline it.
This move also prepares for a follow-up commit that will need to call
restore_acc_track_spte() from spte.c
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-11-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new_spte local variable is unnecessary. Deleting it can save a line
of code and simplify the remaining lines a bit.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-10-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The warnings in restore_acc_track_spte() can be removed because the only
caller checks is_access_track_spte(), and is_access_track_spte() checks
!spte_ad_enabled(). In other words, the warning can never be triggered.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-9-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consolidate the logic to atomically replace an SPTE with an SPTE that
points to a new page table into a single helper function. This will be
used in a follow-up commit to split huge pages, which involves replacing
each huge page SPTE with an SPTE that points to a page table.
Opportunistically drop the call to trace_kvm_mmu_get_page() in
kvm_tdp_mmu_map() since it is redundant with the identical tracepoint in
tdp_mmu_alloc_sp().
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
First remove tdp_mmu_ from the name since it is redundant given that it
is a static function in tdp_mmu.c. There is a pattern of using tdp_mmu_
as a prefix in the names of static TDP MMU functions, but all of the
other handle_*() variants do not include such a prefix. So drop it
entirely.
Then change "page" to "pt" to convey that this is operating on a page
table rather than an struct page. Purposely use "pt" instead of "sp"
since this function takes the raw RCU-protected page table pointer as an
argument rather than a pointer to the struct kvm_mmu_page.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
