Bus-speed could be default(12.5MHz) or defined by users in dts.
Dw-i3c-master should not hard-code the initial speed to be
I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz)
And because of Synopsys's I3C controller limit (hcnt/lcnt register
length) and core-clk provided, there is a limit to bus speed, too.
For example, when core-clk is 250 MHz, the bus speed cannot be
lowered below 1MHz.
Tested: tested with an i3c sensor and captured with a logic analyzer.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Clang is unable to handle the situation that a chunk of inline
assembly ends with a compat branch instruction and then compiler
generates another control transfer instruction immediately after
this compat branch. The later instruction will end up in forbidden
slot and cause exception.
Workaround by add a option to control the use of compact branch.
Currently it's selected by CC_IS_CLANG and hopefully we can change
it to a version check in future if clang manages to fix it.
Fix boot on boston board.
Link: https://github.com/llvm/llvm-project/issues/61045
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To allow to access system controller registers from watchdog driver code
add a phandle in the watchdog 'wdt' node. This avoid using arch dependent
operations in driver code.
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Watchdog nodes must use 'watchdog' for node name. When a 'make dtbs_check'
is performed the following warning appears:
wdt@100: $nodename:0: 'wdt@100' does not match '^watchdog(@.*|-[0-9a-f])?$'
Fix this warning up properly renaming the node into 'watchdog'.
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9
platforms to force AMD GUID codepath instead of Microsoft codepath.
This was due to a bug with WCN6855 WLAN firmware interaction with
the system.
This bug is fixed by WCN6855 firmware:
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Remove the quirk as it's no longer necessary with this firmware.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=c7a57ef688f7d99d8338a5d8edddc8836ff0e6de
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge series from Mark Brown <broonie@kernel.org>:
This is a collection of fixes I came up after glancing through an
initial test run with the snappily named Kukui Jacuzzi SKU16 Chromebook
on KernelCI. There are more issues flagged, this is just what I fixed
thus far.
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
To start capture on Microchip PDMC the enable bits for each supported
microphone need to be set. After this bit is set the PDMC starts to
receive data from microphones and it considers this data as valid data.
Thus if microphones are not ready the PDMC captures anyway data from its
lines. This data is interpreted by the human ear as poc noises.
To avoid this the following software workaround need to be applied when
starting capture:
1/ enable PDMC channel
2/ wait 150ms
3/ execute 16 dummy reads from RHR
4/ clear interrupts
5/ enable interrupts
6/ enable DMA channel
For this workaround to work step 6 need to be executed at the end.
For step 6 was added patch 1/3 from this series. With this, component
DAI driver sets its struct snd_soc_component_driver::start_dma_last = 1
and proper action is taken based on this flag when starting DAI trigger
vs DMA.
Merge series from Mark Brown <broonie@kernel.org>:
This is a collection of fixes I came up after glancing through an
initial test run with the snappily named Kukui Jacuzzi SKU16 Chromebook
on KernelCI. There are more issues flagged, this is just what I fixed
thus far.
Merge series from Mark Brown <broonie@kernel.org>:
This is a collection of fixes I came up after glancing through an
initial test run with the Spherion Chromebook on KernelCI. There are
more issues flagged, this is just what I fixed thus far - the volume
controls on the MT6359 have issues for example, and a lot of controls
aren't marked as Switches like they should be.
This rather small set of changes includes some minor fixes and
improvements. The AB8500 driver gained support for reading the initial
hardware state and the Synopsys DesignWare driver received some work to
prepare for device tree and platform support.
-----BEGIN PGP SIGNATURE-----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=PQhV
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This rather small set of changes includes some minor fixes and
improvements.
The AB8500 driver gained support for reading the initial hardware
state and the Synopsys DesignWare driver received some work to prepare
for device tree and platform support"
* tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: dwc: Use devm_pwmchip_add()
pwm: dwc: Move memory allocation to own function
pwm: dwc: Change &pci->dev to dev in probe
dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
pwm: iqs620a: Replace one remaining instance of regmap_update_bits()
pwm: ab8500: Implement .get_state()
pwm: ab8500: Fix calculation of duty and period
pwm: lp3943: Drop unused i2c include
dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
pwm: stm32-lp: fix the check on arr and cmp registers update
pwm: Move pwm_capture() dummy to restore order
pwm: sifive: Always let the first pwm_apply_state succeed
direct I/O writes to preallocated blocks by using a shared inode lock
instead of taking an exclusive lock.
In addition, multiple bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmP9gYkACgkQ8vlZVpUN
gaNN0AgAqwS873C9QX7QQK8tE+VvKT7iteNaJ68c/CMymSP7o5RdalbQRiAsSy/Q
88PjBFVFQOsIa1d7OAUr50RHQODjOuOz6SJpitKKPnVC89gAzDt7Pk1AQzABjR37
GY7nneHTQs6fGXLMUz/SlsU+7a08Bz5BeAxVBQxzkRL6D28/sbpT6Iw1tDhUUsug
0o3kz/RolEopCzjhmH/Fpxt5RlBnTya5yX8IgmfEV3y7CfQ+XcTWgRebqDXxVCBE
/VCZOl2cv5n4PFlRH8eUihmyO5iu7p9W9ro6HbLEuxQXwcRNY7skONidceim2EYh
KzWZt59/JAs0DyvRWqZ9irtPDkuYqA==
=OIYo
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Improve performance for ext4 by allowing multiple process to perform
direct I/O writes to preallocated blocks by using a shared inode lock
instead of taking an exclusive lock.
In addition, multiple bug fixes and cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix incorrect options show of original mount_opt and extend mount_opt2
ext4: Fix possible corruption when moving a directory
ext4: init error handle resource before init group descriptors
ext4: fix task hung in ext4_xattr_delete_inode
jbd2: fix data missing when reusing bh which is ready to be checkpointed
ext4: update s_journal_inum if it changes after journal replay
ext4: fail ext4_iget if special inode unallocated
ext4: fix function prototype mismatch for ext4_feat_ktype
ext4: remove unnecessary variable initialization
ext4: fix inode tree inconsistency caused by ENOMEM
ext4: refuse to create ea block when umounted
ext4: optimize ea_inode block expansion
ext4: remove dead code in updating backup sb
ext4: dio take shared inode lock when overwriting preallocated blocks
ext4: don't show commit interval if it is zero
ext4: use ext4_fc_tl_mem in fast-commit replay path
ext4: improve xattr consistency checking and error reporting
Adapt the suggestions for the assembly string functions that Andrew
suggested but that I didn't manage to include into the series that
got applied.
This includes improvements to two comments, removal of unneeded labels
and moving one instruction slightly higher to contradict an
explanatory comment.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230208225328.1636017-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Without gpiolib, this driver fails to link:
arm-linux-gnueabi-ld: sound/soc/codecs/zl38060.o: in function `chip_gpio_get':
zl38060.c:(.text+0x30): undefined reference to `gpiochip_get_data'
arm-linux-gnueabi-ld: sound/soc/codecs/zl38060.o: in function `zl38_spi_probe':
zl38060.c:(.text+0xa18): undefined reference to `devm_gpiochip_add_data_with_key'
This appears to have been in the driver since the start, but is hard to
hit in randconfig testing since gpiolib is almost always selected by something
else.
Fixes: 52e8a94baf ("ASoC: Add initial ZL38060 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230227085850.2503725-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Without modification the AT91SAM9G20-EK has no capture support, none of the
inputs of the CODEC are wired to anything to useful and there are no paths
supporting loopback. Since the audio is clocked from the CODEC and the DAPM
inputs are marked as unusable this means that capture will fail to transfer
any data as the ADC path can't be powered up.
Flag this in the device description so apps don't see unusable capture
support, guarded with the existing optional define for mic input.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230225-asoc-sam9g20ek-v1-1-9baeb4893142@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Sidetone_Positive_Gain_dB control reports a range of 0..100 as valid
but the put() function rejects anything larger than 24. Fix this.
There are numerous other problems with this control, the name is very non
idiomatic and it should be a TLV, but it's ABI so probably we should leave
those alone.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-asoc-mt8192-quick-fixes-v1-4-9a85f90368e1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reporting an error on invalid values is optional but helpful to userspace
so do so.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-asoc-mt8192-quick-fixes-v1-3-9a85f90368e1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA controls put() operations should return 1 if the value changed and 0
if it remains the same, fix the mt8192 driver to do so.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-asoc-mt8192-quick-fixes-v1-2-9a85f90368e1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a lot of info level log messages in the mt8192 ADDA driver which
are trivially triggerable from userspace, many in normal operation. Remove
these to avoid spamming the console.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-asoc-mt8192-quick-fixes-v1-1-9a85f90368e1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Microchip PDMC IP doesn't filter microphone noises on startup. By default,
it captures data received from digital microphones after
the MCHP_PDMC_MR.EN bits are set. Thus when enable is set on PDMC side the
digital microphones might not be ready yet and PDMC captures data from then
in this time. This data captured is poc noise. To avoid this the software
workaround is to the following:
1/ enable PDMC channel
2/ wait 150ms (on SAMA7G5-EK setup)
3/ execute 16 dummy reads from RHR
4/ clear interrupts
5/ enable interrupts
6/ enable DMA channel
Fixes: 50291652af ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230228110145.3770525-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PDMC can work with different types of microphones, thus different boards
could have different microphones. Depending on microphone type the PDMC
would need to wait longer or shorter period (at startup) than the default
chosen one to filter unwanted noise. Thus add microchip,startup-delay-us
binding to let PDMC users to specify startup delay.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230228110145.3770525-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add option to start DMA component after DAI trigger. This is done
by filling the new struct snd_soc_component_driver::start_dma_last.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230228110145.3770525-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA control put() operations should return 0 if the value changed so that
events can be generated appropriately for userspace but the custom control
in the MT8183 I2S DAI driver doesn't do that, fix it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt8183-quick-fixes-v1-2-041f29419ed5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a lot of dev_info() logging in normal operation in the I2S DAI
driver, remove it to avoid spamming the console.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt8183-quick-fixes-v1-1-041f29419ed5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The HPx Mux enumerations define values 5, 6 and 7 but describe them as
"undefined" and map them to the value 0 on writing. Given the descriptions
and behaviour it seems that these values are invalid and should not be
present in the register, the current behaviour is detected as problematic
by mixer-test:
# # HPL Mux.0 expected 5 but read 0, is_volatile 0
# # HPL Mux.0 expected 6 but read 0, is_volatile 0
# # HPL Mux.0 expected 7 but read 0, is_volatile 0
Remove the values from the enumeration, this will prevent userspace setting
them.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-3-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the Wake on Voice 2 control accepts and stores any value written
but it reports that only 0 and 1 are valid values. Reject any out of range
values written by userspace.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-2-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA control put() operations should return 0 if the value changed so that
events can be generated appropriately for userspace but the custom control
for wake on voice stage 2 doesn't do this, fix it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-1-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel always logs the unique subsystem name for a discovery
controller, even in the case user space asked for the well known.
This has lead to confusion as the logs of nvme-cli and the kernel
logs didn't match.
First, nvme-cli connects to the well known discovery controller to
figure out if it supports TP8013. If so then nvme-cli disconnects and
connects to the unique discovery controller. Currently, the kernel show
that user space connected twice to the unique one.
To avoid further confusion, show the well known discovery controller if
user space asked for it:
$ nvme connect-all -v -t tcp -a 192.168.0.1
nvme0: nqn.2014-08.org.nvmexpress.discovery connected
nvme0: nqn.2014-08.org.nvmexpress.discovery disconnected
nvme0: nqn.discovery connected
kernel log:
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.0.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
nvme nvme0: new ctrl: NQN "nqn.discovery", addr 192.168.0.1:8009
Fixes: e5ea42faa7 ("nvme: display correct subsystem NQN")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
While the error recovery work is temporarily failing reconnect attempts,
running the 'nvme list' command causes a kernel NULL pointer dereference
by calling getsockname() with a released socket.
During error recovery work, the nvme tcp socket is released and a new one
created, so it is not safe to access the socket without proper check.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: 02c57a82c0 ("nvme-tcp: print actual source IP address through sysfs "address" attr")
Reviewed-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This function was transitioned from returning NVMe status codes to
returning traditional kernel error codes. However, this particular
return now accidentally returns positive error codes like ENOMEM instead
of negative -ENOMEM.
Fixes: b0ef1b11d3 ("nvme-auth: don't use NVMe status codes")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Bring back the check of the Identify Namespace return value for the
legacy NVMe 1.0-style sequential scanning. While NVMe 1.0 does not
support namespace management, there are "modern" cloud solutions like
Google Cloud Platform that claim the obsolete 1.0 compliance for no
good reason while supporting proprietary sideband namespace management.
Fixes: 1a893c2bfe ("nvme: refactor namespace probing")
Reported-by: Nils Hanke <nh@edgeless.systems>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Nils Hanke <nh@edgeless.systems>
Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1]
Do the following steps can reproduce this BUG:
mount -t ocfs2 /dev/vdc /mnt/ocfs2
cp testfile /mnt/ocfs2/
./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1
umount /mnt/ocfs2
Then umount will fail, and it outputs:
umount: /mnt/ocfs2: target is busy.
While tracing umount, it blames mnt_get_count() not return as expected.
Do a deep investigation for fget()/fput() on related code flow, I've
finally found that fget() leaks since ocfs2 doesn't support nowait
buffered read.
io_issue_sqe
|-io_assign_file // do fget() first
|-io_read
|-io_iter_do_read
|-ocfs2_file_read_iter // return -EOPNOTSUPP
|-kiocb_done
|-io_rw_done
|-__io_complete_rw_common // set REQ_F_REISSUE
|-io_resubmit_prep
|-io_req_prep_async // override req->file, leak happens
This was introduced by commit a196c78b54 in v5.18. Fix it by don't
re-assign req->file if it has already been assigned.
[1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t
Fixes: a196c78b54 ("io_uring: assign non-fixed early for async work")
Cc: <stable@vger.kernel.org>
Reported-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230228045459.13524-1-joseph.qi@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current kernel (d2980d8d82) crashes
when blk_iocost_init for `nvme1` disk.
BUG: kernel NULL pointer dereference, address: 0000000000000050
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
blk_iocost_init (include/asm-generic/qspinlock.h:128
include/linux/spinlock.h:203
include/linux/spinlock_api_smp.h:158
include/linux/spinlock.h:400
block/blk-iocost.c:2884)
ioc_qos_write (block/blk-iocost.c:3198)
? kretprobe_perf_func (kernel/trace/trace_kprobe.c:1566)
? kernfs_fop_write_iter (include/linux/slab.h:584 fs/kernfs/file.c:311)
? __kmem_cache_alloc_node (mm/slab.h:? mm/slub.c:3452 mm/slub.c:3491)
? _copy_from_iter (arch/x86/include/asm/uaccess_64.h:46
arch/x86/include/asm/uaccess_64.h:52
lib/iov_iter.c:183 lib/iov_iter.c:628)
? kretprobe_dispatcher (kernel/trace/trace_kprobe.c:1693)
cgroup_file_write (kernel/cgroup/cgroup.c:4061)
kernfs_fop_write_iter (fs/kernfs/file.c:334)
vfs_write (include/linux/fs.h:1849 fs/read_write.c:491
fs/read_write.c:584)
ksys_write (fs/read_write.c:637)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
This happens because ioc_refresh_params() is being called without
a properly initialized ioc->rqos, which is happening later in the callee
side.
ioc_refresh_params() -> ioc_autop_idx() tries to access
ioc->rqos.disk->queue but ioc->rqos.disk is NULL, causing the BUG above.
Create function, called ioc_refresh_params_disk(), that is similar to
ioc_refresh_params() but where the "struct gendisk" could be passed as
an explicit argument. This function will be called when ioc->rqos.disk
is not initialized.
Fixes: ce57b55860 ("blk-rq-qos: make rq_qos_add and rq_qos_del more useful")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230228111654.1778120-1-leitao@debian.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Produce arch/s390/boot/vmlinux.map link map for the decompressor, when
CONFIG_VMLINUX_MAP option is enabled.
Link map is quite useful during making kernel changes related to how
the decompressor is composed and debugging linker scripts.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Clear CPU state (e.g. all TLB entries, prefetched instructions, etc.)
of the target CPU, however without clearing register contents before
starting any work on it.
This puts the target CPU in a more defined state compared to the
current Stop + Restart sigp orders.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If a machine check interrupt hits while user process is
running __s390_handle_mcck() helper function is called
directly from the interrupt handler and terminates the
current process by calling make_task_dead() routine.
The make_task_dead() is not allowed to be called from
interrupt context which forces the machine check handler
switch to the kernel stack and enable local interrupts
first.
The __s390_handle_mcck() could also be called to service
pending work, but this time from the external interrupts
handler. It is the machine check handler that establishes
the work and schedules the external interrupt, therefore
the machine check interrupt itself should be disabled
while reading out the corresponding variable:
local_mcck_disable();
mcck = *this_cpu_ptr(&cpu_mcck);
memset(this_cpu_ptr(&cpu_mcck), 0, sizeof(mcck));
local_mcck_enable();
However, local_mcck_disable() does not have effect when
__s390_handle_mcck() is called directly form the machine
check handler, since the machine check interrupt is still
disabled. Therefore, it is not the opening bracket to the
following local_mcck_enable() function.
Simplify the user process termination flow by scheduling
the external interrupt and killing the affected process
from the interrupt context.
Assume a kernel-generated signal is always delivered and
ignore a value returned by do_send_sig_info() funciton.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use READ_ONCE_ALIGNED_128() to read the previous value in front of a
128-bit cmpxchg loop, instead of (mis-)using a 128-bit cmpxchg operation to
do the same.
This makes the code more readable and is faster.
Link: https://lore.kernel.org/r/20230224100237.3247871-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add an s390 specific READ_ONCE_ALIGNED_128() helper, which can be used for
fast block concurrent (atomic) 128-bit accesses.
The used lpq instruction requires 128-bit alignment. This is also the
reason why the compiler doesn't emit this instruction if __READ_ONCE() is
used for 128-bit accesses.
Link: https://lore.kernel.org/r/20230224100237.3247871-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Our virtual KASLR displacement is a randomly chosen multiple of
2 MiB plus an offset that is equal to the physical placement modulo 2
MiB. This arrangement ensures that we can always use 2 MiB block
mappings (or contiguous PTE mappings for 16k or 64k pages) to map the
kernel.
This means that a KASLR offset of less than 2 MiB is simply the product
of this physical displacement, and no randomization has actually taken
place. Currently, we use 'kaslr_offset() > 0' to decide whether or not
randomization has occurred, and so we misidentify this case.
If the kernel image placement is not randomized, modules are allocated
from a dedicated region below the kernel mapping, which is only used for
modules and not for other vmalloc() or vmap() calls.
When randomization is enabled, the kernel image is vmap()'ed randomly
inside the vmalloc region, and modules are allocated in the vicinity of
this mapping to ensure that relative references are always in range.
However, unlike the dedicated module region below the vmalloc region,
this region is not reserved exclusively for modules, and so ordinary
vmalloc() calls may end up overlapping with it. This should rarely
happen, given that vmalloc allocates bottom up, although it cannot be
ruled out entirely.
The misidentified case results in a placement of the kernel image within
2 MiB of its default address. However, the logic that randomizes the
module region is still invoked, and this could result in the module
region overlapping with the start of the vmalloc region, instead of
using the dedicated region below it. If this happens, a single large
vmalloc() or vmap() call will use up the entire region, and leave no
space for loading modules after that.
Since commit 82046702e2 ("efi/libstub/arm64: Replace 'preferred'
offset with alignment check"), this is much more likely to occur on
systems that boot via EFI but lack an implementation of the EFI RNG
protocol, as in that case, the EFI stub will decide to leave the image
where it found it, and the EFI firmware uses 64k alignment only.
Fix this, by correctly identifying the case where the virtual
displacement is a result of the physical displacement only.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230223204101.1500373-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In error handling 'free_cluster', before num_alloc clusters allocated,
p_chain->size will not updated and always 0, thus the newly allocated
clusters are not freed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When allocating a new cluster, exFAT first allocates from the
next cluster of the last cluster of the file. If the last cluster
of the file is the last cluster of the volume, allocate from the
first cluster. This is a normal case, but the following error log
will be printed. It makes users confused, so this commit removes
the error log.
[1960905.181545] exFAT-fs (sdb1): hint_cluster is invalid (262130)
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In the removed code, num_clusters is 0, nothing is done in
exfat_chain_cont_cluster(), so it is unneeded, remove it.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Florian reports that when building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y,
he sees "Misaligned patch-site" warnings at boot, e.g.
| Misaligned patch-site bcm2836_arm_irqchip_handle_irq+0x0/0x88
| WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
This is because GCC will silently ignore `-falign-functions=N` when
passed `-Os`, resulting in functions not being aligned as we expect.
This is a known issue, and to account for this we modified the kernel to
avoid `-Os` generally. Unfortunately we forgot to account for
CONFIG_CC_OPTIMIZE_FOR_SIZE.
Forbid the use of CALL_OPS with CONFIG_CC_OPTIMIZE_FOR_SIZE=y to prevent
this issue. All exising ftrace features will work as before, though
without the performance benefit of CALL_OPS.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: http://lore.kernel.org/linux-arm-kernel/2d9284c3-3805-402b-5423-520ced56d047@gmail.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230227115819.365630-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(),
but in the process it accidentally changed the export type from GPL to
non-GPL. Switch it back to GPL.
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: ddddedaa0d ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net
Clang warns (or errors with CONFIG_WERROR):
../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!fbdev)
^~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:259:26: note: uninitialized use occurs here
drm_fb_helper_unprepare(helper);
^~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:2: note: remove the 'if' if its condition is always false
if (!fbdev)
^~~~~~~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:228:30: note: initialize the variable 'helper' to silence this warning
struct drm_fb_helper *helper;
^
= NULL
1 error generated.
Return early, as there is nothing for the function to do if memory
cannot be allocated. There is no point in adding another label to just
emit the warning at the end of the function in this case, as memory
allocation failures are already logged.
Fixes: 3fb1f62f80 ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()")
Link: https://github.com/ClangBuiltLinux/linux/issues/1809
Link: https://lore.kernel.org/oe-kbuild-all/202302250058.fYTe9aTP-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224-omapdrm-wsometimes-uninitialized-v1-1-3fec8906ee3a@kernel.org
The attempt to add DMA alignment padding by moving IV to the front
of edesc was completely broken as it didn't change the places where
edesc was freed.
It's also wrong as the IV may still share a cache-line with the
edesc.
Fix this by restoring the original layout and simply reserving
enough memmory so that the IV is on a DMA cache-line by itself.
Reported-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Fixes: 199354d7fb ("crypto: caam - Remove GFP_DMA and add DMA alignment padding")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Although powerpc now has objtool mcount support, it's not enabled in all
configurations due to dependencies.
On those configurations, with some linkers (binutils 2.37 at least),
it's still possible to hit the dreaded "recordmcount bug", eg. errors
such as:
CC kernel/kexec_file.o
Cannot find symbol for section 10: .text.unlikely.
kernel/kexec_file.o: failed
make[1]: *** [scripts/Makefile.build:287 : kernel/kexec_file.o] Error 1
Those errors are much more prevalent when building with
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, because it places every function
in a separate section.
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is marked experimental and is not
enabled in any powerpc defconfigs or by major distros. Although it does
have at least some users on 32-bit where kernel size tends to be more
important.
Avoid the build errors by blocking CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
when the build is using recordmcount, rather than objtool. In practice
that means for 64-bit big endian builds, or 64-bit clang builds - both
because they lack CONFIG_MPROFILE_KERNEL.
On 32-bit objtool is always used, so
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is still available there.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230221130331.2714199-1-mpe@ellerman.id.au
