Commit graph

1001 commits

Author SHA1 Message Date
Qu Wenruo
f4f39fc5dc btrfs: remove btrfs_bio::logical member
The member btrfs_bio::logical is only initialized by two call sites:

- btrfs_repair_one_sector()
  No corresponding site to utilize it.

- btrfs_submit_direct()
  The corresponding site to utilize it is btrfs_check_read_dio_bio().

However for btrfs_check_read_dio_bio(), we can grab the file_offset from
btrfs_dio_private::file_offset directly.

Thus it turns out we don't really need that btrfs_bio::logical member at
all.

For btrfs_bio, the logical bytenr can be fetched from its
bio->bi_iter.bi_sector directly.

So let's just remove the member to save 8 bytes for structure btrfs_bio.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:06 +02:00
Josef Bacik
8496153945 btrfs: add a BTRFS_FS_ERROR helper
We have a few flags that are inconsistently used to describe the fs in
different states of failure.  As of 5963ffcaf3 ("btrfs: always abort
the transaction if we abort a trans handle") we will always set
BTRFS_FS_STATE_ERROR if we abort, so we don't have to check both ABORTED
and ERROR to see if things have gone wrong.  Add a helper to check
BTRFS_FS_STATE_ERROR and then convert all checkers of FS_STATE_ERROR to
use the helper.

The TRANS_ABORTED bit check was added in af72273381 ("Btrfs: clean up
resources during umount after trans is aborted") but is not actually
specific.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:05 +02:00
Qu Wenruo
2749f7ef36 btrfs: subpage: avoid potential deadlock with compression and delalloc
[BUG]
With experimental subpage compression enabled, a simple fsstress can
lead to self deadlock on page 720896:

        mkfs.btrfs -f -s 4k $dev > /dev/null
        mount $dev -o compress $mnt
        $fsstress -p 1 -n 100 -w -d $mnt -v -s 1625511156

[CAUSE]
If we have a file layout looks like below:

	0	32K	64K	96K	128K
	|//|		|///////////////|
	   4K

Then we run delalloc range for the inode, it will:

- Call find_lock_delalloc_range() with @delalloc_start = 0
  Then we got a delalloc range [0, 4K).

  This range will be COWed.

- Call find_lock_delalloc_range() again with @delalloc_start = 4K
  Since find_lock_delalloc_range() never cares whether the range
  is still inside page range [0, 64K), it will return range [64K, 128K).

  This range meets the condition for subpage compression, will go
  through async COW path.

  And async COW path will return @page_started.

  But that @page_started is now for range [64K, 128K), not for range
  [0, 64K).

- writepage_dellloc() returned 1 for page [0, 64K)
  Thus page [0, 64K) will not be unlocked, nor its page dirty status
  will be cleared.

Next time when we try to lock page [0, 64K) we will deadlock, as there
is no one to release page [0, 64K).

This problem will never happen for regular page size as one page only
contains one sector.  After the first find_lock_delalloc_range() call,
the @delalloc_end will go beyond @page_end no matter if we found a
delalloc range or not

Thus this bug only happens for subpage, as now we need multiple runs to
exhaust the delalloc range of a page.

[FIX]
Fix the problem by ensuring the delalloc range we ran at least started
inside @locked_page.

So that we will never get incorrect @page_started.

And to prevent such problem from happening again:

- Make find_lock_delalloc_range() return false if the found range is
  beyond @end value passed in.

  Since @end will be utilized now, add an ASSERT() to ensure we pass
  correct @end into find_lock_delalloc_range().

  This also means, for selftests we needs to populate @end before calling
  find_lock_delalloc_range().

- New ASSERT() in find_lock_delalloc_range()
  Now we will make sure the @start/@end passed in at least covers part
  of the page.

- New ASSERT() in run_delalloc_range()
  To make sure the range at least starts inside @locked page.

- Use @delalloc_start as proper cursor, while @delalloc_end is always
  reset to @page_end.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:05 +02:00
Qu Wenruo
e55a0de185 btrfs: rework page locking in __extent_writepage()
Pages passed to __extent_writepage() are always locked, but they may be
locked by different functions.

There are two types of locked page for __extent_writepage():

- Page locked by plain lock_page()
  It should not have any subpage::writers count.
  Can be unlocked by unlock_page().
  This is the most common locked page for __extent_writepage() called
  inside extent_write_cache_pages() or extent_write_full_page().
  Rarer cases include the @locked_page from extent_write_locked_range().

- Page locked by lock_delalloc_pages()
  There is only one caller, all pages except @locked_page for
  extent_write_locked_range().
  In this case, we have to call subpage helper to handle the case.

So here we introduce a helper, btrfs_page_unlock_writer(), to allow
__extent_writepage() to unlock different locked pages.

And since for all other callers of __extent_writepage() their pages are
ensured to be locked by lock_page(), also add an extra check for
epd::extent_locked to unlock such pages directly.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:05 +02:00
Qu Wenruo
66448b9d5b btrfs: subpage: make extent_write_locked_range() compatible
There are two sites are not subpage compatible yet for
extent_write_locked_range():

- How @nr_pages are calculated
  For subpage we can have the following range with 64K page size:

  0   32K  64K   96K 128K
  |   |////|/////|   |

  In that case, although 96K - 32K == 64K, thus it looks like one page
  is enough, but the range spans two pages, not one.

  Fix it by doing proper round_up() and round_down() to calculate
  @nr_pages.

  Also add some extra ASSERT()s to ensure the range passed in is already
  aligned.

- How the page end is calculated
  Currently we just use cur + PAGE_SIZE - 1 to calculate the page end.

  Which can't handle the above range layout, and will trigger ASSERT()
  in btrfs_writepage_endio_finish_ordered(), as the range is no longer
  covered by the page range.

  Fix it by taking page end into consideration.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:05 +02:00
Qu Wenruo
2bd0fc9349 btrfs: cleanup for extent_write_locked_range()
There are several cleanups for extent_write_locked_range(), most of them
are pure cleanups, but with some preparation for future subpage support.

- Add a proper comment for which call sites are suitable
  Unlike regular synchronized extent write back, if async COW or zoned
  COW happens, we have all pages in the range still locked.

  Thus for those (only) two call sites, we need this function to submit
  page content into bios and submit them.

- Remove @mode parameter
  All the existing two call sites pass WB_SYNC_ALL. No need for @mode
  parameter.

- Better error handling
  Currently if we hit an error during the page iteration loop, we
  overwrite @ret, causing only the last error can be recorded.

  Here we add @found_error and @first_error variable to record if we hit
  any error, and the first error we hit.
  So the first error won't get lost.

- Don't reuse @start as the cursor
  We reuse the parameter @start as the cursor to iterate the range, not
  a big problem, but since we're here, introduce a proper @cur as the
  cursor.

- Remove impossible branch
  Since all pages are still locked after the ordered extent is inserted,
  there is no way that pages can get its dirty bit cleared.
  Remove the branch where page is not dirty and replace it with an
  ASSERT().

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:04 +02:00
Qu Wenruo
6a40491020 btrfs: subpage: make add_ra_bio_pages() compatible
[BUG]
If we remove the subpage limitation in add_ra_bio_pages(), then read a
compressed extent which has part of its range in next page, like the
following inode layout:

	0	32K	64K	96K	128K
	|<--------------|-------------->|

Btrfs will trigger ASSERT() in endio function:

  assertion failed: atomic_read(&subpage->readers) >= nbits
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.h:3431!
  Internal error: Oops - BUG: 0 [#1] SMP
  Workqueue: btrfs-endio btrfs_work_helper [btrfs]
  Call trace:
   assertfail.constprop.0+0x28/0x2c [btrfs]
   btrfs_subpage_end_reader+0x148/0x14c [btrfs]
   end_page_read+0x8c/0x100 [btrfs]
   end_bio_extent_readpage+0x320/0x6b0 [btrfs]
   bio_endio+0x15c/0x1dc
   end_workqueue_fn+0x44/0x64 [btrfs]
   btrfs_work_helper+0x74/0x250 [btrfs]
   process_one_work+0x1d4/0x47c
   worker_thread+0x180/0x400
   kthread+0x11c/0x120
   ret_from_fork+0x10/0x30
  ---[ end trace c8b7b552d3bb408c ]---

[CAUSE]
When we read the page range [0, 64K), we find it's a compressed extent,
and we will try to add extra pages in add_ra_bio_pages() to avoid
reading the same compressed extent.

But when we add such page into the read bio, it doesn't follow the
behavior of btrfs_do_readpage() to properly set subpage::readers.

This means, for page [64K, 128K), its subpage::readers is still 0.

And when endio is executed on both pages, since page [64K, 128K) has 0
subpage::readers, it triggers above ASSERT()

[FIX]
Function add_ra_bio_pages() is far from subpage compatible, it always
assume PAGE_SIZE == sectorsize, thus when it skip to next range it
always just skip PAGE_SIZE.

Make it subpage compatible by:

- Skip to next page properly when needed
  If we find there is already a page cache, we need to skip to next page.
  For that case, we shouldn't just skip PAGE_SIZE bytes, but use
  @pg_index to calculate the next bytenr and continue.

- Only add the page range covered by current extent map
  We need to calculate which range is covered by current extent map and
  only add that part into the read bio.

- Update subpage::readers before submitting the bio

- Use proper cursor other than confusing @last_offset

- Calculate the missed threshold based on sector size
  It's no longer using missed pages, as for 64K page size, we have at
  most 3 pages to skip. (If aligned only 2 pages)

- Add ASSERT() to make sure our bytenr is always aligned

- Add comment for the function
  Add a special note for subpage case, as the function won't really
  work well for subpage cases.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:03 +02:00
Qu Wenruo
cf3075fb36 btrfs: remove unnecessary parameter delalloc_start for writepage_delalloc()
In function __extent_writepage() we always pass page start to
@delalloc_start for writepage_delalloc().

Thus we don't really need @delalloc_start parameter as we can extract it
from @page.

Remove @delalloc_start parameter and make __extent_writepage() to
declare @page_start and @page_end as const.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:03 +02:00
Qu Wenruo
c3a3b19bac btrfs: rename struct btrfs_io_bio to btrfs_bio
Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.

With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.

The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.

This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.

We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:02 +02:00
Qu Wenruo
cd8e0cca95 btrfs: remove btrfs_bio_alloc() helper
The helper btrfs_bio_alloc() is almost the same as btrfs_io_bio_alloc(),
except it's allocating using BIO_MAX_VECS as @nr_iovecs, and initializes
bio->bi_iter.bi_sector.

However the naming itself is not using "btrfs_io_bio" to indicate its
parameter is "strcut btrfs_io_bio" and can be easily confused with
"struct btrfs_bio".

Considering assigned bio->bi_iter.bi_sector is such a simple work and
there are already tons of call sites doing that manually, there is no
need to do that in a helper.

Remove btrfs_bio_alloc() helper, and enhance btrfs_io_bio_alloc()
function to provide a fail-safe value for its @nr_iovecs.

And then replace all btrfs_bio_alloc() callers with
btrfs_io_bio_alloc().

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:02 +02:00
Qu Wenruo
4c66461179 btrfs: rename btrfs_bio to btrfs_io_context
The structure btrfs_bio is used by two different sites:

- bio->bi_private for mirror based profiles
  For those profiles (SINGLE/DUP/RAID1*/RAID10), this structures records
  how many mirrors are still pending, and save the original endio
  function of the bio.

- RAID56 code
  In that case, RAID56 only utilize the stripes info, and no long uses
  that to trace the pending mirrors.

So btrfs_bio is not always bind to a bio, and contains more info for IO
context, thus renaming it will make the naming less confusing.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:02 +02:00
Johannes Thumshirn
35156d8527 btrfs: zoned: only allow one process to add pages to a relocation inode
Don't allow more than one process to add pages to a relocation inode on
a zoned filesystem, otherwise we cannot guarantee the sequential write
rule once we're filling preallocated extents on a zoned filesystem.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:01 +02:00
Qu Wenruo
38d5e541dd btrfs: unexport repair_io_failure()
Function repair_io_failure() is no longer used out of extent_io.c since
commit 8b9b6f2554 ("btrfs: scrub: cleanup the remaining nodatasum
fixup code"), which removes the last external caller.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:01 +02:00
Anand Jain
d24fa5c1da btrfs: convert latest_bdev type to btrfs_device and rename
In preparation to fix a bug in btrfs_show_devname().

Convert fs_devices::latest_bdev type from struct block_device to struct
btrfs_device and, rename the member to fs_devices::latest_dev.
So that btrfs_show_devname() can use fs_devices::latest_dev::name.

Tested-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:00 +02:00
Naohiro Aota
be1a1d7a5d btrfs: zoned: finish fully written block group
If we have written to the zone capacity, the device automatically
deactivates the zone. Sync up block group side (the active BG list and
zone_is_active flag) with it.

We need to do it both on data BGs and metadata BGs. On data side, we add a
hook to btrfs_finish_ordered_io(). On metadata side, we use
end_extent_buffer_writeback().

To reduce excess lookup of a block group, we mark the last extent buffer in
a block group with EXTENT_BUFFER_ZONE_FINISH flag. This cannot be done for
data (ordered_extent), because the address may change due to
REQ_OP_ZONE_APPEND.

Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:00 +02:00
Qu Wenruo
72a69cd030 btrfs: subpage: pack all subpage bitmaps into a larger bitmap
Currently we use u16 bitmap to make 4k sectorsize work for 64K page
size.

But this u16 bitmap is not large enough to contain larger page size like
128K, nor is space efficient for 16K page size.

To handle both cases, here we pack all subpage bitmaps into a larger
bitmap, now btrfs_subpage::bitmaps[] will be the ultimate bitmap for
subpage usage.

Each sub-bitmap will has its start bit number recorded in
btrfs_subpage_info::*_start, and its bitmap length will be recorded in
btrfs_subpage_info::bitmap_nr_bits.

All subpage bitmap operations will be converted from using direct u16
operations to bitmap operations, with above *_start calculated.

For 64K page size with 4K sectorsize, this should not cause much
difference.

While for 16K page size, we will only need 1 unsigned long (u32) to
store all the bitmaps, which saves quite some space.

Furthermore, this allows us to support larger page size like 128K and
258K.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:03:55 +02:00
Qu Wenruo
651fb41927 btrfs: subpage: make btrfs_alloc_subpage() return btrfs_subpage directly
The existing calling convention of btrfs_alloc_subpage() is pretty
awful.  Change it to a more common pattern by returning struct
btrfs_subpage directly and let the caller to determine if the call
succeeded.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-25 21:17:16 +02:00
Qu Wenruo
fdf250db89 btrfs: subpage: only call btrfs_alloc_subpage() when sectorsize is smaller than PAGE_SIZE
There are two call sites of btrfs_alloc_subpage():

- btrfs_attach_subpage()
  We have ensured sectorsize is smaller than PAGE_SIZE

- alloc_extent_buffer()
  We call btrfs_alloc_subpage() unconditionally.

The alloc_extent_buffer() forces us to check the sectorsize size against
page size inside btrfs_alloc_subpage().

Since the function name, btrfs_alloc_subpage(), already indicates it
should only get called for subpage cases, do the check in
alloc_extent_buffer() and add an ASSERT() in btrfs_alloc_subpage().

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-25 21:17:16 +02:00
Naohiro Aota
939c7feb19 btrfs: zoned: fix ordered extent boundary calculation
btrfs_lookup_ordered_extent() is supposed to query the offset in a file
instead of the logical address. Pass the file offset from
submit_extent_page() to calc_bio_boundaries().

Also, calc_bio_boundaries() relies on the bio's operation flag, so move
the call site after setting it.

Fixes: 390ed29b81 ("btrfs: refactor submit_extent_page() to make bio and its flag tracing easier")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:16 +02:00
Boris Burkov
146054090b btrfs: initial fsverity support
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.

Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.

Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.

Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.

Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:09 +02:00
Qu Wenruo
7361b4ae03 btrfs: remove the dead comment in writepage_delalloc()
When btrfs_run_delalloc_range() failed, we will error out.

But there is a strange comment mentioning that
btrfs_run_delalloc_range() could have returned value >0 to indicate the
IO has already started.

Commit 40f765805f ("Btrfs: split up __extent_writepage to lower stack
usage") introduced the comment, but unfortunately at that time, we were
already using @page_started to indicate that case, and still return 0.

Furthermore, even if that comment was right (which is not), we would
return -EIO if the IO had already started.

By all means the comment is incorrect, just remove the comment along
with the dead check.

Just to be extra safe, add an ASSERT() in btrfs_run_delalloc_range() to
make sure we either return 0 or error, no positive return value.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:08 +02:00
Chaitanya Kulkarni
21dda654d4 btrfs: fix argument type of btrfs_bio_clone_partial()
The offset and can never be negative use unsigned int instead of int
type for them.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:08 +02:00
Qu Wenruo
963e4db83e btrfs: unify regular and subpage error paths in __extent_writepage()
[BUG]
When running btrfs/160 in a loop for subpage with experimental
compression support, it has a high chance to crash (~20%):

 BTRFS critical (device dm-7): panic in __btrfs_add_ordered_extent:238: inconsistency in ordered tree at offset 0 (errno=-17 Object already exists)
 ------------[ cut here ]------------
 kernel BUG at fs/btrfs/ordered-data.c:238!
 Internal error: Oops - BUG: 0 [#1] SMP
 pc : __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
 lr : __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
 Call trace:
  __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
  btrfs_add_ordered_extent+0x2c/0x50 [btrfs]
  run_delalloc_nocow+0x81c/0x8fc [btrfs]
  btrfs_run_delalloc_range+0xa4/0x390 [btrfs]
  writepage_delalloc+0xc0/0x1ac [btrfs]
  __extent_writepage+0xf4/0x370 [btrfs]
  extent_write_cache_pages+0x288/0x4f4 [btrfs]
  extent_writepages+0x58/0xe0 [btrfs]
  btrfs_writepages+0x1c/0x30 [btrfs]
  do_writepages+0x60/0x110
  __filemap_fdatawrite_range+0x108/0x170
  filemap_fdatawrite_range+0x20/0x30
  btrfs_fdatawrite_range+0x34/0x4dc [btrfs]
  __btrfs_write_out_cache+0x34c/0x480 [btrfs]
  btrfs_write_out_cache+0x144/0x220 [btrfs]
  btrfs_start_dirty_block_groups+0x3ac/0x6b0 [btrfs]
  btrfs_commit_transaction+0xd0/0xbb4 [btrfs]
  btrfs_sync_fs+0x64/0x1cc [btrfs]
  sync_fs_one_sb+0x3c/0x50
  iterate_supers+0xcc/0x1d4
  ksys_sync+0x6c/0xd0
  __arm64_sys_sync+0x1c/0x30
  invoke_syscall+0x50/0x120
  el0_svc_common.constprop.0+0x4c/0xd4
  do_el0_svc+0x30/0x9c
  el0_svc+0x2c/0x54
  el0_sync_handler+0x1a8/0x1b0
  el0_sync+0x198/0x1c0
 ---[ end trace 336f67369ae6e0af ]---

[CAUSE]
For subpage case, we can have multiple sectors inside a page, this makes
it possible for __extent_writepage() to have part of its page submitted
before returning.

In btrfs/160, we are using dm-dust to emulate write error, this means
for certain pages, we could have everything running fine, but at the end
of __extent_writepage(), one of the submitted bios fails due to dm-dust.

Then the page is marked Error, and we change @ret from 0 to -EIO.

This makes the caller extent_write_cache_pages() to error out, without
submitting the remaining pages.

Furthermore, since we're erroring out for free space cache, it doesn't
really care about the error and will update the inode and retry the
writeback.

Then we re-run the delalloc range, and will try to insert the same
delalloc range while previous delalloc range is still hanging there,
triggering the above error.

[FIX]
The proper fix is to handle errors from __extent_writepage() properly,
by ending the remaining ordered extent.

But that fix needs the following changes:

- Know at exactly which sector the error happened
  Currently __extent_writepage_io() works for the full page, can't
  return at which sector we hit the error.

- Grab the ordered extent covering the failed sector

As a hotfix for subpage case, here we unify the error paths in
__extent_writepage().

In fact, the "if (PageError(page))" branch never get executed if @ret is
still 0 for non-subpage cases.

As for non-subpage case, we never submit current page in
__extent_writepage(), but only add current page into bio.
The bio can only get submitted in next page.

Thus we never get PageError() set due to IO failure, thus when we hit
the branch, @ret is never 0.

By simply removing that @ret assignment, we let subpage case ignore the
IO failure, thus only error out for fatal errors just like regular
sectorsize.

So that IO error won't be treated as fatal error not trigger the hanging
OE problem.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:06 +02:00
Qu Wenruo
e0eefe07f8 btrfs: subpage: allow submit_extent_page() to do bio split
Current submit_extent_page() just checks if the current page range can
be fitted into current bio, and if not, submit then re-add.

But this behavior can't handle subpage case at all.

For subpage case, the problem is in the page size, 64K, which is also
the same size as stripe size.

This means, if we can't fit a full 64K into a bio, due to stripe limit,
then it won't fit into next bio without crossing stripe either.

The proper way to handle it is:

- Check how many bytes we can be put into current bio
- Put as many bytes as possible into current bio first
- Submit current bio
- Create a new bio
- Add the remaining bytes into the new bio

Refactor submit_extent_page() so that it does the above iteration.

The main loop inside submit_extent_page() will look like this:

	cur = pg_offset;
	while (cur < pg_offset + size) {
		u32 offset = cur - pg_offset;
		int added;
		if (!bio_ctrl->bio) {
			/* Allocate new bio if needed */
		}

		/* Add as many bytes into the bio */
		added = btrfs_bio_add_page();

		if (added < size - offset) {
			/* The current bio is full, submit it */
		}
		cur += added;
	}

Also, since we're doing new bio allocation deep inside the main loop,
extract that code into a new helper, alloc_new_bio().

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:05 +02:00
Qu Wenruo
cc1d0d93d5 btrfs: subpage: fix writeback which does not have ordered extent
[BUG]
When running fsstress with subpage RW support, there are random
BUG_ON()s triggered with the following trace:

 kernel BUG at fs/btrfs/file-item.c:667!
 Internal error: Oops - BUG: 0 [#1] SMP
 CPU: 1 PID: 3486 Comm: kworker/u13:2 5.11.0-rc4-custom+ #43
 Hardware name: Radxa ROCK Pi 4B (DT)
 Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
 pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
 pc : btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
 lr : btrfs_csum_one_bio+0x400/0x4e0 [btrfs]
 Call trace:
  btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
  btrfs_submit_bio_start+0x20/0x30 [btrfs]
  run_one_async_start+0x28/0x44 [btrfs]
  btrfs_work_helper+0x128/0x1b4 [btrfs]
  process_one_work+0x22c/0x430
  worker_thread+0x70/0x3a0
  kthread+0x13c/0x140
  ret_from_fork+0x10/0x30

[CAUSE]
Above BUG_ON() means there is some bio range which doesn't have ordered
extent, which indeed is worth a BUG_ON().

Unlike regular sectorsize == PAGE_SIZE case, in subpage we have extra
subpage dirty bitmap to record which range is dirty and should be
written back.

This means, if we submit bio for a subpage range, we do not only need to
clear page dirty, but also need to clear subpage dirty bits.

In __extent_writepage_io(), we will call btrfs_page_clear_dirty() for
any range we submit a bio.

But there is loophole, if we hit a range which is beyond i_size, we just
call btrfs_writepage_endio_finish_ordered() to finish the ordered io,
then break out, without clearing the subpage dirty.

This means, if we hit above branch, the subpage dirty bits are still
there, if other range of the page get dirtied and we need to writeback
that page again, we will submit bio for the old range, leaving a wild
bio range which doesn't have ordered extent.

[FIX]
Fix it by always calling btrfs_page_clear_dirty() in
__extent_writepage_io().

Also to avoid such problem from happening again, add a new assert,
btrfs_page_assert_not_dirty(), to make sure both page dirty and subpage
dirty bits are cleared before exiting __extent_writepage_io().

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:04 +02:00
Qu Wenruo
4c37a79384 btrfs: reset this_bio_flag to avoid inheriting old flags
In btrfs_do_readpage(), we never reset @this_bio_flag after we hit a
compressed extent.

This is fine, as for PAGE_SIZE == sectorsize case, we can only have one
sector for one page, thus @this_bio_flag will only be set at most once.

But for subpage case, after hitting a compressed extent, @this_bio_flag
will always have EXTENT_BIO_COMPRESSED bit, even we're reading a regular
extent.

This will lead to various read errors, and causing new ASSERT() in
incoming subpage patches, which adds more strict check in
btrfs_submit_compressed_read().

Fix it by declaring @this_bio_flag inside the main loop and reset its
value for each iteration.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:03 +02:00
David Sterba
25c1252a02 btrfs: switch uptodate to bool in btrfs_writepage_endio_finish_ordered
The uptodate parameter should be bool, change the type.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:02 +02:00
Qu Wenruo
a129ffb816 btrfs: remove unused start and end parameters from btrfs_run_delalloc_range()
Since commit d75855b451 ("btrfs: Remove
extent_io_ops::writepage_start_hook") removes the writepage_start_hook()
and adds btrfs_writepage_cow_fixup() function, there is no need to
follow the old hook parameters.

Remove the @start and @end hook, since currently the fixup check is full
page check, it doesn't need @start and @end hook.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:02 +02:00
Johannes Thumshirn
5a80d1c6a2 btrfs: zoned: remove max_zone_append_size logic
There used to be a patch in the original series for zoned support which
limited the extent size to max_zone_append_size, but this patch has been
dropped somewhere around v9.

We've decided to go the opposite direction, instead of limiting extents
in the first place we split them before submission to comply with the
device's limits.

Remove the related code, btrfs_fs_info::max_zone_append_size and
btrfs_zoned_device_info::max_zone_append_size.

This also removes the workaround for dm-crypt introduced in
1d68128c10 ("btrfs: zoned: fail mount if the device does not support
zone append") because the fix has been merged as f34ee1dce6 ("dm
crypt: Fix zoned block device support").

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:18:58 +02:00
Qu Wenruo
3d078efae6 btrfs: subpage: fix a rare race between metadata endio and eb freeing
[BUG]
There is a very rare ASSERT() triggering during full fstests run for
subpage rw support.

No other reproducer so far.

The ASSERT() gets triggered for metadata read in
btrfs_page_set_uptodate() inside end_page_read().

[CAUSE]
There is still a small race window for metadata only, the race could
happen like this:

                T1                  |              T2
------------------------------------+-----------------------------
end_bio_extent_readpage()           |
|- btrfs_validate_metadata_buffer() |
|  |- free_extent_buffer()          |
|     Still have 2 refs             |
|- end_page_read()                  |
   |- if (unlikely(PagePrivate())   |
   |  The page still has Private    |
   |                                | free_extent_buffer()
   |                                | |  Only one ref 1, will be
   |                                | |  released
   |                                | |- detach_extent_buffer_page()
   |                                |    |- btrfs_detach_subpage()
   |- btrfs_set_page_uptodate()     |
      The page no longer has Private|
      >>> ASSERT() triggered <<<    |

This race window is super small, thus pretty hard to hit, even with so
many runs of fstests.

But the race window is still there, we have to go another way to solve
it other than relying on random PagePrivate() check.

Data path is not affected, as it will lock the page before reading,
while unlocking the page after the last read has finished, thus no race
window.

[FIX]
This patch will fix the bug by repurposing btrfs_subpage::readers.

Now btrfs_subpage::readers will be a member shared by both metadata and
data.

For metadata path, we don't do the page unlock as metadata only relies
on extent locking.

At the same time, teach page_range_has_eb() to take
btrfs_subpage::readers into consideration.

So that even if the last eb of a page gets freed, page::private won't be
detached as long as there still are pending end_page_read() calls.

By this we eliminate the race window, this will slight increase the
metadata memory usage, as the page may not be released as frequently as
usual.  But it should not be a big deal.

The code got introduced in ("btrfs: submit read time repair only for
each corrupted sector"), but the fix is in a separate patch to keep the
problem description and the crash is rare so it should not hurt
bisectability.

Signed-off-by: Qu Wegruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
c5ef5c6c73 btrfs: make __extent_writepage_io() only submit dirty range for subpage
__extent_writepage_io() function originally just iterates through all
the extent maps of a page, and submits any regular extents.

This is fine for sectorsize == PAGE_SIZE case, as if a page is dirty, we
need to submit the only sector contained in the page.

But for subpage case, one dirty page can contain several clean sectors
with at least one dirty sector.

If __extent_writepage_io() still submit all regular extent maps, it can
submit data which is already written to disk.
And since such already written data won't have corresponding ordered
extents, it will trigger a BUG_ON() in btrfs_csum_one_bio().

Change the behavior of __extent_writepage_io() by finding the first
dirty byte in the page, and only submit the dirty range other than the
full extent.

Since we're also here, also modify the following calls to be subpage
compatible:

- SetPageError()
- end_page_writeback()

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
d2a9106448 btrfs: make btrfs_set_range_writeback() subpage compatible
Function btrfs_set_range_writeback() currently just sets the page
writeback unconditionally.

Change it to call the subpage helper so that we can handle both cases
well.

Since the subpage helpers needs btrfs_fs_info, also change the parameter
to accept btrfs_inode.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
a33a8e9afc btrfs: update locked page dirty/writeback/error bits in __process_pages_contig
When __process_pages_contig() gets called for
extent_clear_unlock_delalloc(), if we hit the locked page, only Private2
bit is updated, but dirty/writeback/error bits are all skipped.

There are several call sites that call extent_clear_unlock_delalloc()
with locked_page and PAGE_CLEAR_DIRTY/PAGE_SET_WRITEBACK/PAGE_END_WRITEBACK

- cow_file_range()
- run_delalloc_nocow()
- cow_file_range_async()
  All for their error handling branches.

For those call sites, since we skip the locked page for
dirty/error/writeback bit update, the locked page will still have its
subpage dirty bit remaining.

Normally it's the call sites which locked the page to handle the locked
page, but it won't hurt if we also do the update.

Especially there are already other call sites doing the same thing by
manually passing NULL as locked_page.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
b945a4637e btrfs: make page Ordered bit to be subpage compatible
This involves the following modification:

- Ordered extent creation
  This is done in process_one_page(), now PAGE_SET_ORDERED will call
  subpage helper to do the work.

- endio functions
  This is done in btrfs_mark_ordered_io_finished().

- btrfs_invalidatepage()

- btrfs_cleanup_ordered_extents()
  Use the subpage page helper, and add an extra branch to exit if the
  locked page have covered the full range.

Now the usage of page Ordered flag for ordered extent accounting is fully
subpage compatible.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
1e1de38792 btrfs: make process_one_page() to handle subpage locking
Introduce a new data inodes specific subpage member, writers, to record
how many sectors are under page lock for delalloc writing.

This member acts pretty much the same as readers, except it's only for
delalloc writes.

This is important for delalloc code to trace which page can really be
freed, as we have cases like run_delalloc_nocow() where we may exit
processing nocow range inside a page, but need to exit to do cow half
way.
In that case, we need a way to determine if we can really unlock a full
page.

With the new btrfs_subpage::writers, there is a new requirement:
- Page locked by process_one_page() must be unlocked by
  process_one_page()
  There are still tons of call sites manually lock and unlock a page,
  without updating btrfs_subpage::writers.
  So if we lock a page through process_one_page() then it must be
  unlocked by process_one_page() to keep btrfs_subpage::writers
  consistent.

  This will be handled in next patch.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00
Qu Wenruo
9047e3170a btrfs: make end_bio_extent_writepage() to be subpage compatible
Now in end_bio_extent_writepage(), the only subpage incompatible code is
the end_page_writeback().

Just call the subpage helpers.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00
Qu Wenruo
e38992be1f btrfs: make __process_pages_contig() to handle subpage dirty/error/writeback status
For __process_pages_contig() and process_one_page(), to handle subpage
we only need to pass bytenr in and call subpage helpers to handle
dirty/error/writeback status.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00
Qu Wenruo
321a02db32 btrfs: only require sector size alignment for end_bio_extent_writepage()
Just like read page, for subpage support we only require sector size
alignment.

So change the error message condition to only require sector alignment.

This should not affect existing code, as for regular sectorsize ==
PAGE_SIZE case, we are still requiring page alignment.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00
Qu Wenruo
ed8f13bf4a btrfs: refactor page status update into process_one_page()
In __process_pages_contig() we update page status according to page_ops.

That update process is a bunch of 'if' branches, which lie inside
two loops, this makes it pretty hard to expand for later subpage
operations.

So this patch will extract these operations into its own function,
process_one_pages().

Also since we're refactoring __process_pages_contig(), also move the new
helper and __process_pages_contig() before the first caller of them, to
remove the forward declaration.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00
Qu Wenruo
98af9ab12b btrfs: pass bytenr directly to __process_pages_contig()
As a preparation for incoming subpage support, we need bytenr passed to
__process_pages_contig() directly, not the current page index.

So change the parameter and all callers to pass bytenr in.

With the modification, here we need to replace the old @index_ret with
@processed_end for __process_pages_contig(), but this brings a small
problem.

Normally we follow the inclusive return value, meaning @processed_end
should be the last byte we processed.

If parameter @start is 0, and we failed to lock any page, then we would
return @processed_end as -1, causing more problems for
__unlock_for_delalloc().

So here for @processed_end, we use two different return value patterns.
If we have locked any page, @processed_end will be the last byte of
locked page.
Or it will be @start otherwise.

This change will impact lock_delalloc_pages(), so it needs to check
@processed_end to only unlock the range if we have locked any.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00
Qu Wenruo
f57ad93735 btrfs: rename PagePrivate2 to PageOrdered inside btrfs
Inside btrfs we use Private2 page status to indicate we have an ordered
extent with pending IO for the sector.

But the page status name, Private2, tells us nothing about the bit
itself, so this patch will rename it to Ordered.
And with extra comment about the bit added, so reader who is still
uncertain about the page Ordered status, will find the comment pretty
easily.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00
Qu Wenruo
38a39ac77e btrfs: pass btrfs_inode to btrfs_writepage_endio_finish_ordered()
There is a pretty bad abuse of btrfs_writepage_endio_finish_ordered() in
end_compressed_bio_write().

It passes compressed pages to btrfs_writepage_endio_finish_ordered(),
which is only supposed to accept inode pages.

Thankfully the important info here is the inode, so let's pass
btrfs_inode directly into btrfs_writepage_endio_finish_ordered(), and
make @page parameter optional.

By this, end_compressed_bio_write() can happily pass page=NULL while
still getting everything done properly.

Also, to cooperate with such modification, replace @page parameter for
trace_btrfs_writepage_end_io_hook() with btrfs_inode.
Although this removes page_index info, the existing start/len should be
enough for most usage.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:08 +02:00
Qu Wenruo
fa04c16574 btrfs: make subpage metadata write path call its own endio functions
For subpage metadata, we're reusing two functions for subpage metadata
write:

- end_bio_extent_buffer_writepage()
- write_one_eb()

But the truth is, for subpage we just call
end_bio_subpage_eb_writepage() without using any bit in
end_bio_extent_buffer_writepage().

For write_one_eb(), it's pretty similar, but with a small part of code
reused.

There is really no need to pollute the existing code path if we're not
really using most of them.

So this patch will do the following change to separate the subpage
metadata write path from regular write path by:

- Use end_bio_subpage_eb_writepage() directly as endio in
  write_one_subpage_eb()
- Directly call write_one_subpage_eb() in submit_eb_subpage()

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:08 +02:00
Qu Wenruo
390ed29b81 btrfs: refactor submit_extent_page() to make bio and its flag tracing easier
There is a lot of code inside extent_io.c needs both "struct bio
**bio_ret" and "unsigned long prev_bio_flags", along with some
parameters like "unsigned long bio_flags".

Such strange parameters are here for bio assembly.

For example, we have such inode page layout:

  0       4K      8K      12K
  |<-- Extent A-->|<- EB->|

Then what we do is:

- Page [0, 4K)
  *bio_ret = NULL
  So we allocate a new bio to bio_ret,
  Add page [0, 4K) to *bio_ret.

- Page [4K, 8K)
  *bio_ret != NULL
  We found this page is continuous to *bio_ret,
  and if we're not at stripe boundary, we
  add page [4K, 8K) to *bio_ret.

- Page [8K, 12K)
  *bio_ret != NULL
  But we found this page is not continuous, so
  we submit *bio_ret, then allocate a new bio,
  and add page [8K, 12K) to the new bio.

This means we need to record both the bio and its bio_flag, but we
record them manually using those strange parameter list, other than
encapsulating them into their own structure.

So this patch will introduce a new structure, btrfs_bio_ctrl, to record
both the bio, and its bio_flags.

Also, in above case, for all pages added to the bio, we need to check if
the new page crosses stripe boundary.  This check itself can be time
consuming, and we don't really need to do that for each page.

This patch also integrates the stripe boundary check into btrfs_bio_ctrl.
When a new bio is allocated, the stripe and ordered extent boundary is
also calculated, so no matter how large the bio will be, we only
calculate the boundaries once, to save some CPU time.

The following functions/structures are affected:

- struct extent_page_data
  Replace its bio pointer with structure btrfs_bio_ctrl (embedded
  structure, not pointer)

- end_write_bio()
- flush_write_bio()
  Just change how bio is fetched

- btrfs_bio_add_page()
  Use pre-calculated boundaries instead of re-calculating them.
  And use @bio_ctrl to replace @bio and @prev_bio_flags.

- calc_bio_boundaries()
  New function

- submit_extent_page() callers
- btrfs_do_readpage() callers
- contiguous_readpages() callers
  To Use @bio_ctrl to replace @bio and @prev_bio_flags, and how to grab
  bio.

- btrfs_bio_fits_in_ordered_extent()
  Removed, as now the ordered extent size limit is done at bio
  allocation time, no need to check for each page range.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:08 +02:00
David Sterba
24880be59c btrfs: clean up header members offsets in write helpers
Move header offsetof() to the expression that calculates the address so
it's part of get_eb_offset_in_page where the 2nd parameter is the member
offset.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:06 +02:00
Johannes Thumshirn
e7ff9e6b8e btrfs: zoned: factor out zoned device lookup
To be able to construct a zone append bio we need to look up the
btrfs_device. The code doing the chunk map lookup to get the device is
present in btrfs_submit_compressed_write and submit_extent_page.

Factor out the lookup calls into a helper and use it in the submission
paths.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:05 +02:00
Qu Wenruo
1245835d24 btrfs: remove io_failure_record::in_validation
The io_failure_record::in_validation was introduced to handle failed bio
which cross several sectors.  In such case, we still need to verify
which sectors are corrupted.

But since we've changed the way how we handle corrupted sectors, by only
submitting repair for each corrupted sector, there is no need for extra
validation any more.

This patch will cleanup all io_failure_record::in_validation related
code.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:05 +02:00
Qu Wenruo
150e4b0597 btrfs: submit read time repair only for each corrupted sector
Currently btrfs_submit_read_repair() has some extra check on whether the
failed bio needs extra validation for repair.  But we can avoid all
these extra mechanisms if we submit the repair for each sector.

By this, each read repair can be easily handled without the need to
verify which sector is corrupted.

This will also benefit subpage, as one subpage bvec can contain several
sectors, making the extra verification more complex.

So this patch will:

- Introduce repair_one_sector()
  The main code submitting repair, which is more or less the same as old
  btrfs_submit_read_repair().
  But this time, it only repairs one sector.

- Make btrfs_submit_read_repair() to handle sectors differently
  There are 3 different cases:

  * Good sector
    We need to release the page and extent, set the range uptodate.

  * Bad sector and failed to submit repair bio
    We need to release the page and extent, but not set the range
    uptodate.

  * Bad sector but repair bio submitted
    The page and extent release will be handled by the submitted repair
    bio. Nothing needs to be done.

  Since btrfs_submit_read_repair() will handle the page and extent
  release now, we need to skip to next bvec even we hit some error.

- Change the lifespan of @uptodate in end_bio_extent_readpage()
  Since now btrfs_submit_read_repair() will handle the full bvec
  which contains any corruption, we don't need to bother updating
  @uptodate bit anymore.
  Just let @uptodate to be local variable inside the main loop,
  so that any error from one bvec won't affect later bvec.

- Only export btrfs_repair_one_sector(), unexport
  btrfs_submit_read_repair()
  The only outside caller for read repair is DIO, which already submits
  its repair for just one sector.
  Only export btrfs_repair_one_sector() for DIO.

This patch will focus on the change on the repair path, the extra
validation code is still kept as is, and will be cleaned up later.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:05 +02:00
Goldwyn Rodrigues
dc56219fe2 btrfs: correct try_lock_extent() usage in read_extent_buffer_subpage()
try_lock_extent() returns 1 on success or 0 for failure and not an error
code. If try_lock_extent() fails, read_extent_buffer_subpage() returns
zero indicating subpage extent read success.

Return EAGAIN/EWOULDBLOCK if try_lock_extent() fails in locking the
extent.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:04 +02:00
Linus Torvalds
45af60e7ce for-5.13-rc2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmCoEQkACgkQxWXV+ddt
 WDsn6Q//XXQVextL6g6Wjx0SR9b5C1ndSV841jNY+KQ0drBPSOBs+0SXI+nIWAK1
 iTpmj3s2qrRElZZ6DT4fKP28KnbUJed9+CcirNnN3IMOeauI760CLobXZLsw1wGH
 o0HKKgcPhw/v9o9jqX22rSfzDZ2Rx2KhZ8iEb1ZXIG5iJNFcnXCCoFOqk4I+UEvH
 /5734KU8RI3sCRhziSf/vDCF50p+BIWr8VilQkmZUzi0oa6Y1wXm0qd9j0unhICR
 NxcBk1NYdOosAvVRhSqync1BNLhXSctg4rwhLlSI5SDvt/Ivz5tguNr9HcizOvmW
 zyb0g1c3Pq0p2wQJLybbs1zn67d0+7Q23UPWx1C+IKU3nmX5mGWzToxjVOQASYaZ
 8UbzYAjUHtJpLDB4dp6+k5Pv/yfVGyhxXI+qLMWow77qRPPf7/vw5nEwTXmjcPRH
 9st0TopZVXI4IEpZP+HeNFdNONuPL3CqV0t1+MnC73WMhmUfXR5E8Yq5H3MscuFl
 smkrWUq/g+cmkiOw5r4MyadFuN1MsXGw4rOdbYjY4JqVht6gPkOp3P73Hme5rD3H
 Txw/1WKEl+w3I6wS0Dl/NFcMGOyl8gEv4rATDyRWkxfmCue2mcTGS/3jjjWWguu4
 +Q7e6p1390PLAvMV/rEDoYmFCoPSYp6trvupW+5fkZdOyei1SZM=
 =98LW
 -----END PGP SIGNATURE-----

Merge tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more fixes:

   - fix unaligned compressed writes in zoned mode

   - fix false positive lockdep warning when cloning inline extent

   - remove wrong BUG_ON in tree-log error handling"

* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix parallel compressed writes
  btrfs: zoned: pass start block to btrfs_use_zone_append
  btrfs: do not BUG_ON in link_to_fixup_dir
  btrfs: release path before starting transaction when cloning inline extent
2021-05-21 13:24:12 -10:00