-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZabMrQAKCRCRxhvAZXjc
ovnUAQDgCOonb1tjtTvC8s8IMDUEoaVYZI91KVfsZQSJYN1sdQD+KfJmX1BhJnWG
l0cEffGfnWGXMZkZqDgLPHUIPzFrmws=
=1b3j
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
- Introduce the param_unknown_fn type and other clean ups (Andy Shevchenko)
- Various __counted_by annotations (Christophe JAILLET, Gustavo A. R. Silva,
Kees Cook)
- Add KFENCE test to LKDTM (Stephen Boyd)
- Various strncpy() refactorings (Justin Stitt)
- Fix qnx4 to avoid writing into the smaller of two overlapping buffers
- Various strlcpy() refactorings
-----BEGIN PGP SIGNATURE-----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=1Wxx
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce the param_unknown_fn type and other clean ups (Andy
Shevchenko)
- Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
Silva, Kees Cook)
- Add KFENCE test to LKDTM (Stephen Boyd)
- Various strncpy() refactorings (Justin Stitt)
- Fix qnx4 to avoid writing into the smaller of two overlapping buffers
- Various strlcpy() refactorings
* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
qnx4: Use get_directory_fname() in qnx4_match()
qnx4: Extract dir entry filename processing into helper
atags_proc: Add __counted_by for struct buffer and use struct_size()
tracing/uprobe: Replace strlcpy() with strscpy()
params: Fix multi-line comment style
params: Sort headers
params: Use size_add() for kmalloc()
params: Do not go over the limit when getting the string length
params: Introduce the param_unknown_fn type
lkdtm: Add kfence read after free crash type
nvme-fc: replace deprecated strncpy with strscpy
nvdimm/btt: replace deprecated strncpy with strscpy
nvme-fabrics: replace deprecated strncpy with strscpy
drm/modes: replace deprecated strncpy with strscpy_pad
afs: Add __counted_by for struct afs_acl and use struct_size()
VMCI: Annotate struct vmci_handle_arr with __counted_by
i40e: Annotate struct i40e_qvlist_info with __counted_by
HID: uhid: replace deprecated strncpy with strscpy
samples: Replace strlcpy() with strscpy()
SUNRPC: Replace strlcpy() with strscpy()
Add a tracepoint to log calls to afs_make_call(), including the destination
server address.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
The current code assumes that offline and busy volume states apply to all
instances of a volume, not just the one on the server that returned
VOFFLINE or VBUSY and will emit a notice to dmesg suggesting that the
entire volume is unavailable.
Fix that by moving the flags recording this to the afs_server_entry struct
that is used to represent a particular instance of a volume on a specific
server. The notice is altered to include the server UUID also.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Fix the fileserver rotation so that it doesn't use RTT as the basis for
deciding which server and address to use as this doesn't necessarily give a
good indication of the best path. Instead, use the configurable preference
list in conjunction with whatever probes have succeeded at the time of
looking.
To this end, make the following changes:
(1) Keep an array of "server states" to track what addresses we've tried
on each server and move the waitqueue entries there that we'll need
for probing.
(2) Each afs_server_state struct is made to pin the corresponding server's
endpoint state rather than the afs_operation struct carrying a pin on
the server we're currently looking at.
(3) Drop the server list preference; we now always rescan the server list.
(4) afs_wait_for_probes() now uses the server state list to guide it in
what it waits for (and to provide the waitqueue entries) and returns
an indication of whether we'd got a response, run out of responsive
addresses or the endpoint state had been superseded and we need to
restart the iteration.
(5) Call afs_get_address_preferences*() occasionally to refresh the
preference values.
(6) When picking a server, scan the addresses of the servers for which we
have as-yet untested communications, looking for the highest priority
one and use that instead of trying all the addresses for a particular
server in ascending-RTT order.
(7) When a Busy or Offline state is seen across all available servers, do
a short sleep.
(8) If we detect that we accessed a future RO volume version whilst it is
undergoing replication, reissue the op against the older version until
at least half of the servers are replicated.
(9) Whilst RO replication is ongoing, increase the frequency of Volume
Location server checks for that volume to every ten minutes instead of
hourly.
Also add a tracepoint to track progress through the rotation algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Overhaul the third party-induced invalidation handling, making use of the
previously added volume-level event counters (cb_scrub and cb_ro_snapshot)
that are now being parsed out of the VolSync record returned by the
fileserver in many of its replies.
This allows better handling of RO (and Backup) volumes. Since these are
snapshot of a RW volume that are updated atomically simultantanously across
all servers that host them, they only require a single callback promise for
the entire volume. The currently upstream code assumes that RO volumes
operate in the same manner as RW volumes, and that each file has its own
individual callback - which means that it does a status fetch for *every*
file in a RO volume, whether or not the volume got "released" (volume
callback breaks can occur for other reasons too, such as the volumeserver
taking ownership of a volume from a fileserver).
To this end, make the following changes:
(1) Change the meaning of the volume's cb_v_break counter so that it is
now a hint that we need to issue a status fetch to work out the state
of a volume. cb_v_break is incremented by volume break callbacks and
by server initialisation callbacks.
(2) Add a second counter, cb_v_check, to the afs_volume struct such that
if this differs from cb_v_break, we need to do a check. When the
check is complete, cb_v_check is advanced to what cb_v_break was at
the start of the status fetch.
(3) Move the list of mmap'd vnodes to the volume and trigger removal of
PTEs that map to files on a volume break rather than on a server
break.
(4) When a server reinitialisation callback comes in, use the
server-to-volume reverse mapping added in a preceding patch to iterate
over all the volumes using that server and clear the volume callback
promises for that server and the general volume promise as a whole to
trigger reanalysis.
(5) Replace the AFS_VNODE_CB_PROMISED flag with an AFS_NO_CB_PROMISE
(TIME64_MIN) value in the cb_expires_at field, reducing the number of
checks we need to make.
(6) Change afs_check_validity() to quickly see if various event counters
have been incremented or if the vnode or volume callback promise is
due to expire/has expired without making any changes to the state.
That is now left to afs_validate() as this may get more complicated in
future as we may have to examine server records too.
(7) Overhaul afs_validate() so that it does a single status fetch if we
need to check the state of either the vnode or the volume - and do so
under appropriate locking. The function does the following steps:
(A) If the vnode/volume is no longer seen as valid, then we take the
vnode validation lock and, if the volume promise has expired, the
volume check lock also. The latter prevents redundant checks being
made to find out if a new version of the volume got released.
(B) If a previous RPC call found that the volsync changed unexpectedly
or that a RO volume was updated, then we unmap all PTEs pointing to
the file to stop mmap being used for access.
(C) If the vnode is still seen to be of uncertain validity, then we
perform an FS.FetchStatus RPC op to jointly update the volume status
and the vnode status. This assessment is done as part of parsing the
reply:
If the RO volume creation timestamp advances, cb_ro_snapshot is
incremented; if either the creation or update timestamps changes in
an unexpected way, the cb_scrub counter is incremented
If the Data Version returned doesn't match the copy we have
locally, then we ask for the pagecache to be zapped. This takes
care of handling RO update.
(D) If cb_scrub differs between volume and vnode, the vnode's
pagecache is zapped and the vnode's cb_scrub is updated unless the
file is marked as having been deleted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
A number of fileserver RPC operations return a VolSync record as part of
their reply that gives some information about the state of the volume being
accessed, including:
(1) A volume Creation timestamp. For an RW volume, this is the time at
which the volume was created; if it changes, the RW volume was
presumably restored from a backup and all cached data should be
scrubbed as Data Version numbers could regress on the files in the
volume.
For an RO volume, this is the time it was last snapshotted from the RW
volume. It is expected to advance each time this happens; if it
regresses, cached data should be scrubbed.
(2) A volume Update timestamp (Auristor only). For an RW volume, this is
updated any time any change is made to a volume or its contents. If
it regresses, all cached data must be scrubbed.
For an RO volume, this is a copy of the RW volume's Update timestamp
at the point of snapshotting. It can be used as a version number when
checking to see if a callback on a RO volume was due to a snapshot.
If it regresses, all cached data must be scrubbed.
but this is currently not made use of by the in-kernel afs filesystem.
Make the afs filesystem use this by:
(1) Add an update time field to the afs_volsync struct and use a value of
TIME64_MIN in both that and the creation time to indicate that they
are unset.
(2) Add creation and update time fields to the afs_volume struct and use
this to track the two timestamps.
(3) Add a volsync_lock mutex to the afs_volume struct to control
modification access for when we detect a change in these values.
(3) Add a 'pre-op volsync' struct to the afs_operation struct to record
the state of the volume tracking before the op.
(4) Add a new counter, cb_scrub, to the afs_volume struct to count events
that require all data to be scrubbed. A copy is placed in the
afs_vnode struct (inode) and if they no longer match, a scrub takes
place.
(5) When the result of an operation is being parsed, parse the VolSync
data too, if it is provided. Note that the two timestamps are handled
separately, since they don't work in quite the same way.
- If the afs_volume tracking is unset, just set it and do nothing
else.
- If the result timestamps are the same as the ones in afs_volume, do
nothing.
- If the timestamps regress, increment cb_scrub if not already done
so.
- If the creation timestamp on a RW volume changes, increment cb_scrub
if not already done so.
- If the creation timestamp on a RO volume advances, update the server
list and see if the current server has been excluded, if so reissue
the op. Once over half of the replication sites have been updated,
increment cb_ro_snapshot to indicate updates may be required and
switch over to excluding unupdated replication sites.
- If the creation timestamp on a Backup volume advances, just
increment cb_ro_snapshot to trigger updates.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Don't leave servers that are marked VLSF_DONTUSE or VLSF_NEWREPSITE out of
the server list for a volume; rather, mark DONTUSE ones excluded and mark
either NEWREPSITE excluded if the number of updated servers is <50% of the
usable servers or mark !NEWREPSITE excluded otherwise.
Mark the server list as a whole with a 3-state flag to indicate whether we
think the RW volume is being replicated to the RO volume, and, if so,
whether we should switch to using updated replication sites
(VLSF_NEWREPSITE) or stick with the old for now.
This processing is pushed up from the VLDB RPC reply parser to the code
that generates the server list from that information.
Doing this allows the old list to be kept with just the exclusion flags
replaced and to keep the server records pinned and maintained.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Apply server breaks to mmap'd files that are being used from that server
from the call processor work function rather than punting it off to a
workqueue. The work item, afs_server_init_callback(), then bumps each
individual inode off to its own work item introducing a potentially lengthy
delay. This reduces that delay at the cost of extending the amount of time
we delay replying to the CB.InitCallBack3 notification RPC from the server.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move the code that does validity checking of vnodes and volumes with
respect to third-party changes into its own file.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Defer volume record destruction to a workqueue so that afs_put_volume()
isn't going to run the destruction process in the callback workqueue whilst
the server is holding up other clients whilst waiting for us to reply to a
CB.CallBack notification RPC.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Make it possible to find the afs_volume structs that are using an
afs_server struct to aid in breaking volume callbacks.
The way this is done is that each afs_volume already has an array of
afs_server_entry records that point to the servers where that volume might
be found. An afs_volume backpointer and a list node is added to each entry
and each entry is then added to an RCU-traversable list on the afs_server
to which it points.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Combine the endpoint state bool-type members into a bitmask so that some of
them can be waited upon more easily.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Keep a record of the current fileserver endpoint state, including the probe
state, and replace it when a new probe is started rather than just
squelching the old state and overwriting it. Clearance of the old state
can cause a race if there's another thread also currently trying to
communicate with that server.
It appears that this race might be the culprit for some occasions where
kafs complains about invalid data in the RPC reply because the rotation
algorithm fell all the way through without actually issuing an RPC call and
the error return got filled in from the probe state (which has a zero error
recorded). Whatever happens to be in the caller's reply buffer is then
taken as the response.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
When probing all the addresses for a volume location server, dispatch them
in order of descending priority to try and get back highest priority one
first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Add a field to each address in an address list (afs_addr_list struct) that
records the current priority for that address according to the address
preference table. We don't want to do this every time we use an address
list, so the version number of the address preference table is recorded in
the address list too and we only re-mark the list when we see the version
change.
These numbers are then displayed through /proc/net/afs/servers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
AFS servers may have multiple addresses, but the client can't easily judge
between them as to which one is best. For instance, an address that has a
larger RTT might actually have a better bandwidth because it goes through a
switch rather than being directly connected - but we can't work this out
dynamically unless we push through sufficient data that we can measure it.
To allow the administrator to configure this, add a list of preference
weightings for server addresses by IPv4/IPv6 address or subnet and allow
this to be viewed through a procfile and altered by writing text commands
to that same file. Preference rules can be added/updated by:
echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs
echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs
echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs
echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs
and removed by:
echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs
echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs
where the priority is a number between 0 and 65535.
The list is split between IPv4 and IPv6 addresses and each sublist is kept
in numerical order, with rules that would otherwise match but have
different subnet masking being ordered with the most specific submatch
first.
A subsequent patch will apply these rules.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Fold the afs_addr_cursor struct into the afs_operation struct and the
afs_vl_cursor struct and fold its operations into their callers also.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Use the rxrpc_peer plus the service ID as the call address instead of
passing in a sockaddr_srx down to rxrpc. The peer record is obtained by
using rxrpc_kernel_get_peer(). This avoids the need to repeatedly look up
the peer and allows rxrpc to hold on to resources for it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Rename the ->index and ->untried fields of the afs_vl_cursor and
afs_operation struct to ->server_index and ->untried_servers to avoid
confusion with address iteration fields when those get folded in.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Add a tracepoint to track the lifetime of the afs_addr_list struct.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Simplify error handling a bit by moving it from the afs_addr_cursor struct
to the afs_operation and afs_vl_cursor structs and using the error
prioritisation function for accumulating errors from multiple sources (AFS
tries to rotate between multiple fileservers, some of which may be
inaccessible or in some state of offlinedness).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Don't put the afs_call struct in afs_wait_for_call_to_complete() but rather
have the caller do it. This will allow the caller to fish stuff out of the
afs_call struct rather than the afs_addr_cursor struct, thereby allowing a
subsequent patch to subsume it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Wrap most op->error accesses with inline funcs which will make it easier
for a subsequent patch to replace op->error with something else. Two
functions are added to this end:
(1) afs_op_error() - Get the error code.
(2) afs_op_set_error() - Set the error code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Set op->nr_iterations to -1 to indicate that we need to begin fileserver
iteration rather than setting error to SHRT_MAX. This makes it easier to
eliminate the address cursor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Rename the failed member of struct addr_list to probe_failed as it's
specifically related to probe failures.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Change rxrpc's API such that:
(1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an
rxrpc_peer record for a remote address and a corresponding function,
rxrpc_kernel_put_peer(), is provided to dispose of it again.
(2) When setting up a call, the rxrpc_peer object used during a call is
now passed in rather than being set up by rxrpc_connect_call(). For
afs, this meenat passing it to rxrpc_kernel_begin_call() rather than
the full address (the service ID then has to be passed in as a
separate parameter).
(3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can
get a pointer to the transport address for display purposed, and
another, rxrpc_kernel_remote_srx(), to gain a pointer to the full
rxrpc address.
(4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(),
is then altered to take a peer. This now returns the RTT or -1 if
there are insufficient samples.
(5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer().
(6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a
peer the caller already has.
This allows the afs filesystem to pin the rxrpc_peer records that it is
using, allowing faster lookups and pointer comparisons rather than
comparing sockaddr_rxrpc contents. It also makes it easier to get hold of
the RTT. The following changes are made to afs:
(1) The addr_list struct's addrs[] elements now hold a peer struct pointer
and a service ID rather than a sockaddr_rxrpc.
(2) When displaying the transport address, rxrpc_kernel_remote_addr() is
used.
(3) The port arg is removed from afs_alloc_addrlist() since it's always
overridden.
(4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may
now return an error that must be handled.
(5) afs_find_server() now takes a peer pointer to specify the address.
(6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{}
now do peer pointer comparison rather than address comparison.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Turn the afs_addr_list address array into an array of structs, thereby
allowing per-address (such as RTT) info to be added.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
AFS currently uses folio->private to store the range of bytes within a
folio that have been modified - the idea being that if we have, say, a 2MiB
folio and someone writes a single byte, we only have to write back that
single page and not the whole 2MiB folio - thereby saving on network
bandwidth.
Remove this, at least for now, and accept the extra network load (which
doesn't matter in the common case of writing a whole file at a time from
beginning to end).
This makes folio->private available for netfslib to use.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Move the resource pinning-for-writeback from fscache code to netfslib code.
This is used to keep a cache backing object pinned whilst we have dirty
pages on the netfs inode in the pagecache such that VM writeback will be
able to reach it.
Whilst we're at it, switch the parameters of netfs_unpin_writeback() to
match ->write_inode() so that it can be used for that directly.
Note that this mechanism could be more generically useful than that for
network filesystems. Quite often they have to keep around other resources
(e.g. authentication tokens or network connections) until the writeback is
complete.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
When an afs_volume struct is put, its refcount is reduced to 0 before
the cell->volume_lock is taken and the volume removed from the
cell->volumes tree.
Unfortunately, this means that the lookup code can race and see a volume
with a zero ref in the tree, resulting in a use-after-free:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda
...
RIP: 0010:refcount_warn_saturate+0x7a/0xda
...
Call Trace:
afs_get_volume+0x3d/0x55
afs_create_volume+0x126/0x1de
afs_validate_fc+0xfe/0x130
afs_get_tree+0x20/0x2e5
vfs_get_tree+0x1d/0xc9
do_new_mount+0x13b/0x22e
do_mount+0x5d/0x8a
__do_sys_mount+0x100/0x12a
do_syscall_64+0x3a/0x94
entry_SYSCALL_64_after_hwframe+0x62/0x6a
Fix this by:
(1) When putting, use a flag to indicate if the volume has been removed
from the tree and skip the rb_erase if it has.
(2) When looking up, use a conditional ref increment and if it fails
because the refcount is 0, replace the node in the tree and set the
removal flag.
Fixes: 20325960f8 ("afs: Reorganise volume and server trees to be rooted on the cell")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSVKwBmxQ1amv47E@work
Signed-off-by: Kees Cook <keescook@chromium.org>
afs_server_list is accessed with the rcu_read_lock() held from
volume->servers, so it needs to be cleaned up correctly.
Fix this by using kfree_rcu() instead of kfree().
Fixes: 8a070a9648 ("afs: Detect cell aliases 1 - Cells with root volumes")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=0iVF
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
This makes it harder for accidental or malicious changes to
afs_xattr_handlers at runtime.
Cc: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230930050033.41174-5-wedsonaf@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct afs_addr_list.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230915201449.never.649-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct afs_permits.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230915201456.never.529-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Fscache has an optimisation by which reads from the cache are skipped
until we know that (a) there's data there to be read and (b) that data
isn't entirely covered by pages resident in the netfs pagecache. This is
done with two flags manipulated by fscache_note_page_release():
if (...
test_bit(FSCACHE_COOKIE_HAVE_DATA, &cookie->flags) &&
test_bit(FSCACHE_COOKIE_NO_DATA_TO_READ, &cookie->flags))
clear_bit(FSCACHE_COOKIE_NO_DATA_TO_READ, &cookie->flags);
where the NO_DATA_TO_READ flag causes cachefiles_prepare_read() to
indicate that netfslib should download from the server or clear the page
instead.
The fscache_note_page_release() function is intended to be called from
->releasepage() - but that only gets called if PG_private or PG_private_2
is set - and currently the former is at the discretion of the network
filesystem and the latter is only set whilst a page is being written to
the cache, so sometimes we miss clearing the optimisation.
Fix this by following Willy's suggestion[1] and adding an address_space
flag, AS_RELEASE_ALWAYS, that causes filemap_release_folio() to always call
->release_folio() if it's set, even if PG_private or PG_private_2 aren't
set.
Note that this would require folio_test_private() and page_has_private() to
become more complicated. To avoid that, in the places[*] where these are
used to conditionalise calls to filemap_release_folio() and
try_to_release_page(), the tests are removed the those functions just
jumped to unconditionally and the test is performed there.
[*] There are some exceptions in vmscan.c where the check guards more than
just a call to the releaser. I've added a function, folio_needs_release()
to wrap all the checks for that.
AS_RELEASE_ALWAYS should be set if a non-NULL cookie is obtained from
fscache and cleared in ->evict_inode() before truncate_inode_pages_final()
is called.
Additionally, the FSCACHE_COOKIE_NO_DATA_TO_READ flag needs to be cleared
and the optimisation cancelled if a cachefiles object already contains data
when we open it.
[dwysocha@redhat.com: call folio_mapping() inside folio_needs_release()]
Link: 902c990e31
Link: https://lkml.kernel.org/r/20230628104852.3391651-3-dhowells@redhat.com
Fixes: 1f67e6d0b1 ("fscache: Provide a function to note the release of a page")
Fixes: 047487c947 ("cachefiles: Implement the I/O routines")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Tested-by: SeongJae Park <sj@kernel.org>
Cc: Daire Byrne <daire.byrne@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jingbo Xu <jefflexu@linux.alibaba.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
...
Call Trace:
<TASK>
rxrpc_send_ACK+0x50/0x13b
rxrpc_input_call_event+0x16a/0x67d
rxrpc_io_thread+0x1b6/0x45f
? _raw_spin_unlock_irqrestore+0x1f/0x35
? rxrpc_input_packet+0x519/0x519
kthread+0xe7/0xef
? kthread_complete_and_exit+0x1b/0x1b
ret_from_fork+0x22/0x30
Fix this by noting the timeouts in struct rxrpc_call when the call is
created. The timer will be started when the first packet is transmitted.
It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal.
Fixes: 9d35d880e0 ("rxrpc: Move client call connection to the I/O thread")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
For the map_pages() method, we need a test that does not sleep. The page
fault handler will continue to call the fault() method where we can sleep
and do the full revalidation there.
Link: https://lkml.kernel.org/r/20230327174515.1811532-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files that
include it.
Move the file locking definitions to a new header file, and add the
appropriate #include directives to the source files that need them. By
doing this we trim down fs.h a bit and limit the amount of rebuilding
that has to be done when we make changes to the file locking APIs.
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Steve French <stfrench@microsoft.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
afs_zap_permits() has been removed since
commit be080a6f43 ("afs: Overhaul permit caching").
afs_cache_netfs has been removed since
commit 523d27cda1 ("afs: Convert afs to use the new fscache API").
so remove the declare for them from header file.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20220909070353.1160228-1-cuigaosheng1@huawei.com/
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
rxrpc and kafs between them try to use the receive timestamp on the first
data packet (ie. the one with sequence number 1) as a base from which to
calculate the time at which callback promise and lock expiration occurs.
However, we don't know how long it took for the server to send us the reply
from it having completed the basic part of the operation - it might then,
for instance, have to send a bunch of a callback breaks, depending on the
particular operation.
Fix this by using the time at which the operation is issued on the client
as a base instead. That should never be longer than the server's idea of
the expiry time.
Fixes: 781070551c ("afs: Fix calculation of callback expiry time")
Fixes: 2070a3e449 ("rxrpc: Allow the reply time to be obtained on a client call")
Suggested-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Linus Torvalds