Commit graph

113 commits

Author SHA1 Message Date
Jeff Layton
913e99287b
fs: drop the timespec64 argument from update_time
Now that all of the update_time operations are prepared for it, we can
drop the timespec64 argument from the update_time operation. Do that and
remove it from some associated functions like inode_update_time and
inode_needs_update_time.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-8-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:57 +02:00
Jeff Layton
541d4c798a fs: drop the timespec64 arg from generic_update_time
In future patches we're going to change how the ctime is updated
to keep track of when it has been queried. The way that the update_time
operation works (and a lot of its callers) make this difficult, since
they grab a timestamp early and then pass it down to eventually be
copied into the inode.

All of the existing update_time callers pass in the result of
current_time() in some fashion. Drop the "time" parameter from
generic_update_time, and rework it to fetch its own timestamp.

This change means that an update_time could fetch a different timestamp
than was seen in inode_needs_update_time. update_time is only ever
called with one of two flag combinations: Either S_ATIME is set, or
S_MTIME|S_CTIME|S_VERSION are set.

With this change we now treat the flags argument as an indicator that
some value needed to be updated when last checked, rather than an
indication to update specific timestamps.

Rework the logic for updating the timestamps and put it in a new
inode_update_timestamps helper that other update_time routines can use.
S_ATIME is as treated as we always have, but if any of the other three
are set, then we attempt to update all three.

Also, some callers of generic_update_time need to know what timestamps
were actually updated. Change it to return an S_* flag mask to indicate
that and rework the callers to expect it.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-3-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-09 08:56:37 +02:00
Jeff Layton
0d72b92883 fs: pass the request_mask to generic_fillattr
generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.

Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.

Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-09 08:56:36 +02:00
Pankaj Raghav
cd01049d9c orangefs: use folios in orangefs_readahead
Patch series "remove page_endio()", v3.

It was decided to remove the page_endio() as per the previous RFC
discussion[1] of this series and move that functionality into the caller
itself.  One of the side benefit of doing that is the callers have been
modified to directly work on folios as page_endio() already worked on
folios.

As Christoph is doing ZRAM cleanups[4] which will get rid of page_endio()
function usage, I removed the final patch that removes page_endio()[5].  I
will send it separately after rc-1 once the zram cleanups are merged.

mpage changes were tested with a simple boot testing and running a fio
workload on ext2 filesystem.  orangefs was tested by Mike Marshall (No
code changes since he tested).


This patch (of 3):

Convert orangefs_readahead() from using struct page to struct folio.  This
conversion removes the call to page_endio() which is soon to be removed,
and simplifies the final page handling.

The page error flags is not required to be set in the error case as
orangefs doesn't depend on them.

Link: https://lkml.kernel.org/r/20230411122920.30134-1-p.raghav@samsung.com
Link: https://lkml.kernel.org/r/20230411122920.30134-2-p.raghav@samsung.com
Link: https://lore.kernel.org/linux-mm/ZBHcl8Pz2ULb4RGD@infradead.org/ [1]
Link: https://lore.kernel.org/linux-mm/20230322135013.197076-1-p.raghav@samsung.com/ [2]
Link: https://lore.kernel.org/linux-mm/8adb0770-6124-e11f-2551-6582db27ed32@samsung.com/ [3]
Link: https://lore.kernel.org/linux-block/20230404150536.2142108-1-hch@lst.de/T/#t [4]
Link: https://lore.kernel.org/lkml/20230403132221.94921-6-p.raghav@samsung.com/ [5]
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marshall <hubcap@omnibond.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:30:01 -07:00
Linus Torvalds
3822a7c409 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X bit.
 
 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.
 
 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes
 
 - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
   does perform some memcg maintenance and cleanup work.
 
 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".  These filters provide users
   with finer-grained control over DAMOS's actions.  SeongJae has also done
   some DAMON cleanup work.
 
 - Kairui Song adds a series ("Clean up and fixes for swap").
 
 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".
 
 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series.  It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.
 
 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".
 
 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".
 
 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".
 
 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".
 
 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series "mm:
   support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
   PTEs".
 
 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".
 
 - Sergey Senozhatsky has improved zsmalloc's memory utilization with his
   series "zsmalloc: make zspage chain size configurable".
 
 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.  The previous BPF-based approach had
   shortcomings.  See "mm: In-kernel support for memory-deny-write-execute
   (MDWE)".
 
 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
 
 - T.J.  Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".
 
 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a per-node
   basis.  See the series "Introduce per NUMA node memory error
   statistics".
 
 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage during
   compaction".
 
 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".
 
 - Christoph Hellwig has removed block_device_operations.rw_page() in ths
   series "remove ->rw_page".
 
 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".
 
 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier functions".
 
 - Some pagemap cleanup and generalization work in Mike Rapoport's series
   "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
   "fixups for generic implementation of pfn_valid()"
 
 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
 
 - Jason Gunthorpe rationalized the GUP system's interface to the rest of
   the kernel in the series "Simplify the external interface for GUP".
 
 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface.  To support this, we'll temporarily be
   printing warnings when people use the debugfs interface.  See the series
   "mm/damon: deprecate DAMON debugfs interface".
 
 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.
 
 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".
 
 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
 jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
 DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
 =MlGs
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
   F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X
   bit.

 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.

 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes

 - Johannes Weiner has a series ("mm: push down lock_page_memcg()")
   which does perform some memcg maintenance and cleanup work.

 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".

   These filters provide users with finer-grained control over DAMOS's
   actions. SeongJae has also done some DAMON cleanup work.

 - Kairui Song adds a series ("Clean up and fixes for swap").

 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".

 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.

 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".

 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".

 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".

 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".

 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series
   "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
   swap PTEs".

 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".

 - Sergey Senozhatsky has improved zsmalloc's memory utilization with
   his series "zsmalloc: make zspage chain size configurable".

 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.

   The previous BPF-based approach had shortcomings. See "mm: In-kernel
   support for memory-deny-write-execute (MDWE)".

 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".

 - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".

 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a
   per-node basis. See the series "Introduce per NUMA node memory error
   statistics".

 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage
   during compaction".

 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".

 - Christoph Hellwig has removed block_device_operations.rw_page() in
   ths series "remove ->rw_page".

 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".

 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier
   functions".

 - Some pagemap cleanup and generalization work in Mike Rapoport's
   series "mm, arch: add generic implementation of pfn_valid() for
   FLATMEM" and "fixups for generic implementation of pfn_valid()"

 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".

 - Jason Gunthorpe rationalized the GUP system's interface to the rest
   of the kernel in the series "Simplify the external interface for
   GUP".

 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface. To support this, we'll temporarily be
   printing warnings when people use the debugfs interface. See the
   series "mm/damon: deprecate DAMON debugfs interface".

 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.

 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".

 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".

* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
  include/linux/migrate.h: remove unneeded externs
  mm/memory_hotplug: cleanup return value handing in do_migrate_range()
  mm/uffd: fix comment in handling pte markers
  mm: change to return bool for isolate_movable_page()
  mm: hugetlb: change to return bool for isolate_hugetlb()
  mm: change to return bool for isolate_lru_page()
  mm: change to return bool for folio_isolate_lru()
  objtool: add UACCESS exceptions for __tsan_volatile_read/write
  kmsan: disable ftrace in kmsan core code
  kasan: mark addr_has_metadata __always_inline
  mm: memcontrol: rename memcg_kmem_enabled()
  sh: initialize max_mapnr
  m68k/nommu: add missing definition of ARCH_PFN_OFFSET
  mm: percpu: fix incorrect size in pcpu_obj_full_size()
  maple_tree: reduce stack usage with gcc-9 and earlier
  mm: page_alloc: call panic() when memoryless node allocation fails
  mm: multi-gen LRU: avoid futile retries
  migrate_pages: move THP/hugetlb migration support check to simplify code
  migrate_pages: batch flushing TLB
  migrate_pages: share more code between _unmap and _move
  ...
2023-02-23 17:09:35 -08:00
Linus Torvalds
5b0ed59649 for-6.3/block-2023-02-16
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPvfncQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpob2EADXJxcr2jjYHm/7cjKkyuVX8fr80dNdMeuY
 JFdsjG1k6Uj73BVhQQWYTcs/PsrWBHWRsv6uz4WgOELj55eXmf5Q0kJszyUeJW33
 /DjqLvtoppVcYf80xE13wKvCfn73BjwQo6xkGM0qAYn15eaXiD/Ax3xC6eJlsBeK
 PEw7EJyhacbSxZa/1D2B6+mqII1jUQWProTCc3udZ4JHi3WvdWa3Rda0qCqHl4a1
 +K2aP2YTFIRPxBzfMNa/CafWVIFubTdht+4Ds6R60RImzB9e0VUBfcsiUyW5Zg7L
 Fwv7ptXuWrALwVNdW56Oz1QikBxn2pdRR2HMLwKJW1MD8kP9r8LMm2jV5Rhiwe0B
 OQsGRYkOzBvw+bxeP5fvk0iPGVMz6ActH4gkraA5QdLqayDaFYOadlhqz0uRo5SH
 Fb42Vl658K/MHDSIk8U58TNkmrsIJsBGohXI9DOGINPPvv3XOPi4Q1HmXkGRmii0
 y+lNU/QEGh7xXXew29SPP76uQpQaYfC7NxXCMw/OpOMwehzjsjshmM2lpxi8zsgt
 PJUmfHv5qxCplNmTJXmUpmX7sS7550HUdu9FJb13DM+gzKg8bk9jWVuLrzqrVlG5
 1hKWEl1+heg1heRfaIuJVLbPI0au6Sb4uqhih/PHyrP9TWIoAruDbDJM65GKTxyE
 2uEgcHzHQw==
 =poRc
 -----END PGP SIGNATURE-----

Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe updates via Christoph:
      - Small improvements to the logging functionality (Amit Engel)
      - Authentication cleanups (Hannes Reinecke)
      - Cleanup and optimize the DMA mapping cod in the PCIe driver
        (Keith Busch)
      - Work around the command effects for Format NVM (Keith Busch)
      - Misc cleanups (Keith Busch, Christoph Hellwig)
      - Fix and cleanup freeing single sgl (Keith Busch)

 - MD updates via Song:
      - Fix a rare crash during the takeover process
      - Don't update recovery_cp when curr_resync is ACTIVE
      - Free writes_pending in md_stop
      - Change active_io to percpu

 - Updates to drbd, inching us closer to unifying the out-of-tree driver
   with the in-tree one (Andreas, Christoph, Lars, Robert)

 - BFQ update adding support for multi-actuator drives (Paolo, Federico,
   Davide)

 - Make brd compliant with REQ_NOWAIT (me)

 - Fix for IOPOLL and queue entering, fixing stalled IO waiting on
   timeouts (me)

 - Fix for REQ_NOWAIT with multiple bios (me)

 - Fix memory leak in blktrace cleanup (Greg)

 - Clean up sbitmap and fix a potential hang (Kemeng)

 - Clean up some bits in BFQ, and fix a bug in the request injection
   (Kemeng)

 - Clean up the request allocation and issue code, and fix some bugs
   related to that (Kemeng)

 - ublk updates and fixes:
      - Add support for unprivileged ublk (Ming)
      - Improve device deletion handling (Ming)
      - Misc (Liu, Ziyang)

 - s390 dasd fixes (Alexander, Qiheng)

 - Improve utility of request caching and fixes (Anuj, Xiao)

 - zoned cleanups (Pankaj)

 - More constification for kobjs (Thomas)

 - blk-iocost cleanups (Yu)

 - Remove bio splitting from drivers that don't need it (Christoph)

 - Switch blk-cgroups to use struct gendisk. Some of this is now
   incomplete as select late reverts were done. (Christoph)

 - Add bvec initialization helpers, and convert callers to use that
   rather than open-coding it (Christoph)

 - Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
   Matthew, Ulf, Zhong)

* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
  brd: use radix_tree_maybe_preload instead of radix_tree_preload
  block: use proper return value from bio_failfast()
  block: bio-integrity: Copy flags when bio_integrity_payload is cloned
  block: Fix io statistics for cgroup in throttle path
  brd: mark as nowait compatible
  brd: check for REQ_NOWAIT and set correct page allocation mask
  brd: return 0/-error from brd_insert_page()
  block: sync mixed merged request's failfast with 1st bio's
  Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
  Revert "blk-cgroup: pass a gendisk to blkg_lookup"
  Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
  Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
  Revert "blk-cgroup: move the cgroup information to struct gendisk"
  nvme-pci: remove iod use_sgls
  nvme-pci: fix freeing single sgl
  block: ublk: check IO buffer based on flag need_get_data
  s390/dasd: Fix potential memleak in dasd_eckd_init()
  s390/dasd: sort out physical vs virtual pointers usage
  block: Remove the ALLOC_CACHE_SLACK constant
  block: make kobj_type structures constant
  ...
2023-02-20 14:27:21 -08:00
Christoph Hellwig
8ead80b2c5 orangefs: use bvec_set_{page,folio} to initialize bvecs
Use the bvec_set_page and bvec_set_folio helpers to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Matthew Wilcox (Oracle)
d585bdbeb7 fs: convert writepage_t callback to pass a folio
Patch series "Convert writepage_t to use a folio".

More folioisation.  I split out the mpage work from everything else
because it completely dominated the patch, but some implementations I just
converted outright.


This patch (of 2):

We always write back an entire folio, but that's currently passed as the
head page.  Convert all filesystems that use write_cache_pages() to expect
a folio instead of a page.

Link: https://lkml.kernel.org/r/20230126201255.1681189-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230126201255.1681189-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-02 22:33:34 -08:00
Christian Brauner
4609e1f18e
fs: port ->permission() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:28 +01:00
Christian Brauner
8782a9aea3
fs: port ->fileattr_set() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:27 +01:00
Christian Brauner
13e83a4923
fs: port ->set_acl() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:27 +01:00
Christian Brauner
b74d24f7a7
fs: port ->getattr() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:25 +01:00
Christian Brauner
c1632a0f11
fs: port ->setattr() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:02 +01:00
Linus Torvalds
6f1f5caed5 orangefs: four fixes from Zhang Xiaoxu and two from Colin Ian King
Zhang: fixed problems with memory leaks on exit in sysfs and debufs.
 fs/orangefs/orangefs-debugfs.c
 fs/orangefs/orangefs-sysfs.c
 fs/orangefs/orangefs-debugfs.c
 fs/orangefs/orangefs-mod.c
 
 Colin: removed an unused variable and an unneeded assignment.
 fs/orangefs/file.c
 fs/orangefs/inode.c
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEIGSFVdO6eop9nER2z0QOqevODb4FAmOQ+4sACgkQz0QOqevO
 Db4hLg//Vj5t1OBMxc/qbHGs6DwyIThQATss2jE2q0dkWwXxwsmxa23dwXzQGe6b
 hF+gLzh5AgJ4BnaoFYAgF/pJ7Su1iz3FLzh1J4dQ1zfPA/cr0vAhoxmpMH0X4+H8
 nycDNn/gZuZVn/2x1SVnDrut6R9mIQM6ESYdO/99TK8z2IIgqiaCZRi0timPp6Gs
 z3XYibdSbFib4xjbNLcdwLsLphzR4XupMdaXGai7MBriEc3lLN5dIn1hElbrmHD8
 k3xRVyWlyBknp1/xb8icnn05vim35PIbuY6K9RaJfhx94qdfu51c0rST1Ay4zY0Z
 FKTI6CocraXJWZ2557yXrLCxUa+/t7VYvxmF7oYgrqCD4xlzybEO79iGo6mvJ1cd
 47PERjJFDa5AvVYFC9Ggm5V4qJhX60fUxXubmwhQVtMNFNjo/P9dpxbmkHmFmTG3
 Op+N45MsVJNxQDtE1qwcoTU5nBEX/6ziQGaYkgXa8YArSn89xs4i89wQlACsJElM
 xXZCoKxQgT1wyq2DvoieVAShFSXXJ9OQjOYI3lGN57n+jHSweR0Jr5IfUGq3dfax
 nyyjcDr2p291w2weFbsQtdUTdGKKhEiky7aSIvFMtCXUHdsIIty+YSx3vjAk3A/p
 a0HFgZBuTPYwdbwW4EA+12Prf2xnsoHV/51dbklCAhKEGAPSMg0=
 =2ddP
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.2-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux

Pull orangefs updates from Mike Marshall:

 - fix problems with memory leaks on exit in sysfs and debufs (Zhang)

 - remove an unused variable and an unneeded assignment (Colin)

* tag 'for-linus-6.2-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
  orangefs: Fix kmemleak in orangefs_sysfs_init()
  orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
  orangefs: Fix sysfs not cleanup when dev init failed
  orangefs: remove redundant assignment to variable buffer_index
  orangefs: remove variable i
2022-12-14 11:16:33 -08:00
Linus Torvalds
6a518afcc2 fs.acl.rework.v6.2
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bwTgAKCRCRxhvAZXjc
 ovd2AQCK00NAtGjQCjQPQGyTa4GAPqvWgq1ef0lnhv+TL5US5gD9FncQ8UofeMXt
 pBfjtAD6ettTPCTxUQfnTwWEU4rc7Qg=
 =27Wm
 -----END PGP SIGNATURE-----

Merge tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull VFS acl updates from Christian Brauner:
 "This contains the work that builds a dedicated vfs posix acl api.

  The origins of this work trace back to v5.19 but it took quite a while
  to understand the various filesystem specific implementations in
  sufficient detail and also come up with an acceptable solution.

  As we discussed and seen multiple times the current state of how posix
  acls are handled isn't nice and comes with a lot of problems: The
  current way of handling posix acls via the generic xattr api is error
  prone, hard to maintain, and type unsafe for the vfs until we call
  into the filesystem's dedicated get and set inode operations.

  It is already the case that posix acls are special-cased to death all
  the way through the vfs. There are an uncounted number of hacks that
  operate on the uapi posix acl struct instead of the dedicated vfs
  struct posix_acl. And the vfs must be involved in order to interpret
  and fixup posix acls before storing them to the backing store, caching
  them, reporting them to userspace, or for permission checking.

  Currently a range of hacks and duct tape exist to make this work. As
  with most things this is really no ones fault it's just something that
  happened over time. But the code is hard to understand and difficult
  to maintain and one is constantly at risk of introducing bugs and
  regressions when having to touch it.

  Instead of continuing to hack posix acls through the xattr handlers
  this series builds a dedicated posix acl api solely around the get and
  set inode operations.

  Going forward, the vfs_get_acl(), vfs_remove_acl(), and vfs_set_acl()
  helpers must be used in order to interact with posix acls. They
  operate directly on the vfs internal struct posix_acl instead of
  abusing the uapi posix acl struct as we currently do. In the end this
  removes all of the hackiness, makes the codepaths easier to maintain,
  and gets us type safety.

  This series passes the LTP and xfstests suites without any
  regressions. For xfstests the following combinations were tested:
   - xfs
   - ext4
   - btrfs
   - overlayfs
   - overlayfs on top of idmapped mounts
   - orangefs
   - (limited) cifs

  There's more simplifications for posix acls that we can make in the
  future if the basic api has made it.

  A few implementation details:

   - The series makes sure to retain exactly the same security and
     integrity module permission checks. Especially for the integrity
     modules this api is a win because right now they convert the uapi
     posix acl struct passed to them via a void pointer into the vfs
     struct posix_acl format to perform permission checking on the mode.

     There's a new dedicated security hook for setting posix acls which
     passes the vfs struct posix_acl not a void pointer. Basing checking
     on the posix acl stored in the uapi format is really unreliable.
     The vfs currently hacks around directly in the uapi struct storing
     values that frankly the security and integrity modules can't
     correctly interpret as evidenced by bugs we reported and fixed in
     this area. It's not necessarily even their fault it's just that the
     format we provide to them is sub optimal.

   - Some filesystems like 9p and cifs need access to the dentry in
     order to get and set posix acls which is why they either only
     partially or not even at all implement get and set inode
     operations. For example, cifs allows setxattr() and getxattr()
     operations but doesn't allow permission checking based on posix
     acls because it can't implement a get acl inode operation.

     Thus, this patch series updates the set acl inode operation to take
     a dentry instead of an inode argument. However, for the get acl
     inode operation we can't do this as the old get acl method is
     called in e.g., generic_permission() and inode_permission(). These
     helpers in turn are called in various filesystem's permission inode
     operation. So passing a dentry argument to the old get acl inode
     operation would amount to passing a dentry to the permission inode
     operation which we shouldn't and probably can't do.

     So instead of extending the existing inode operation Christoph
     suggested to add a new one. He also requested to ensure that the
     get and set acl inode operation taking a dentry are consistently
     named. So for this version the old get acl operation is renamed to
     ->get_inode_acl() and a new ->get_acl() inode operation taking a
     dentry is added. With this we can give both 9p and cifs get and set
     acl inode operations and in turn remove their complex custom posix
     xattr handlers.

     In the future I hope to get rid of the inode method duplication but
     it isn't like we have never had this situation. Readdir is just one
     example. And frankly, the overall gain in type safety and the more
     pleasant api wise are simply too big of a benefit to not accept
     this duplication for a while.

   - We've done a full audit of every codepaths using variant of the
     current generic xattr api to get and set posix acls and
     surprisingly it isn't that many places. There's of course always a
     chance that we might have missed some and if so I'm sure we'll find
     them soon enough.

     The crucial codepaths to be converted are obviously stacking
     filesystems such as ecryptfs and overlayfs.

     For a list of all callers currently using generic xattr api helpers
     see [2] including comments whether they support posix acls or not.

   - The old vfs generic posix acl infrastructure doesn't obey the
     create and replace semantics promised on the setxattr(2) manpage.
     This patch series doesn't address this. It really is something we
     should revisit later though.

  The patches are roughly organized as follows:

   (1) Change existing set acl inode operation to take a dentry
       argument (Intended to be a non-functional change)

   (2) Rename existing get acl method (Intended to be a non-functional
       change)

   (3) Implement get and set acl inode operations for filesystems that
       couldn't implement one before because of the missing dentry.
       That's mostly 9p and cifs (Intended to be a non-functional
       change)

   (4) Build posix acl api, i.e., add vfs_get_acl(), vfs_remove_acl(),
       and vfs_set_acl() including security and integrity hooks
       (Intended to be a non-functional change)

   (5) Implement get and set acl inode operations for stacking
       filesystems (Intended to be a non-functional change)

   (6) Switch posix acl handling in stacking filesystems to new posix
       acl api now that all filesystems it can stack upon support it.

   (7) Switch vfs to new posix acl api (semantical change)

   (8) Remove all now unused helpers

   (9) Additional regression fixes reported after we merged this into
       linux-next

  Thanks to Seth for a lot of good discussion around this and
  encouragement and input from Christoph"

* tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (36 commits)
  posix_acl: Fix the type of sentinel in get_acl
  orangefs: fix mode handling
  ovl: call posix_acl_release() after error checking
  evm: remove dead code in evm_inode_set_acl()
  cifs: check whether acl is valid early
  acl: make vfs_posix_acl_to_xattr() static
  acl: remove a slew of now unused helpers
  9p: use stub posix acl handlers
  cifs: use stub posix acl handlers
  ovl: use stub posix acl handlers
  ecryptfs: use stub posix acl handlers
  evm: remove evm_xattr_acl_change()
  xattr: use posix acl api
  ovl: use posix acl api
  ovl: implement set acl method
  ovl: implement get acl method
  ecryptfs: implement set acl method
  ecryptfs: implement get acl method
  ksmbd: use vfs_remove_acl()
  acl: add vfs_remove_acl()
  ...
2022-12-12 18:46:39 -08:00
Colin Ian King
b352507283 orangefs: remove variable i
Variable i is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2022-12-07 15:18:29 -05:00
Al Viro
de4eda9de2 use less confusing names for iov_iter direction initializers
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-25 13:01:55 -05:00
Christian Brauner
e40df4281b
orangefs: fix mode handling
In 4053d2500b ("orangefs: rework posix acl handling when creating new
filesystem objects") we tried to precalculate the correct mode when
creating a new inode. However, this leads to regressions when creating new
filesystem objects.

Even if we precalculate the mode we still need to call __orangefs_setattr()
to perform additional checks and we also need to update the mode of
ACL_TYPE_ACCESS acls set on the inode. The patch referenced above regressed
that. Restore that part of the old behavior and remove the mode
precalculation as it doesn't get us anything anymore.

Fixes: 4053d2500b ("orangefs: rework posix acl handling when creating new filesystem objects")
Reported-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-11-13 10:27:52 +01:00
Christian Brauner
cac2f8b8d8
fs: rename current get acl method
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

The current inode operation for getting posix acls takes an inode
argument but various filesystems (e.g., 9p, cifs, overlayfs) need access
to the dentry. In contrast to the ->set_acl() inode operation we cannot
simply extend ->get_acl() to take a dentry argument. The ->get_acl()
inode operation is called from:

acl_permission_check()
-> check_acl()
   -> get_acl()

which is part of generic_permission() which in turn is part of
inode_permission(). Both generic_permission() and inode_permission() are
called in the ->permission() handler of various filesystems (e.g.,
overlayfs). So simply passing a dentry argument to ->get_acl() would
amount to also having to pass a dentry argument to ->permission(). We
should avoid this unnecessary change.

So instead of extending the existing inode operation rename it from
->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that
passes a dentry argument and which filesystems that need access to the
dentry can implement instead of ->get_inode_acl(). Filesystems like cifs
which allow setting and getting posix acls but not using them for
permission checking during lookup can simply not implement
->get_inode_acl().

This is intended to be a non-functional change.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-20 10:13:27 +02:00
Christian Brauner
138060ba92
fs: pass dentry to set acl method
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.

Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().

As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-19 12:55:42 +02:00
Christian Brauner
4053d2500b
orangefs: rework posix acl handling when creating new filesystem objects
When creating new filesytem objects orangefs used to create posix acls
after it had created and inserted a new inode. This made it necessary to
all posix_acl_chmod() on the newly created inode in case the mode of the
inode would be changed by the posix acls.

Instead of doing it this way calculate the correct mode directly before
actually creating the inode. So we first create posix acls, then pass
the mode that posix acls mandate into the orangefs getattr helper and
calculate the correct mode. This is needed so we can simply change
posix_acl_chmod() to take a dentry instead of an inode argument in the
next patch.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-19 10:30:52 +02:00
Matthew Wilcox (Oracle)
9329883a1c orangefs: Remove test for folio error
The page cache clears the error bit before calling ->read_folio(),
so this condition could never have been true.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-06-29 08:51:07 -04:00
Matthew Wilcox (Oracle)
c78ac80e98 orangefs: Convert to free_folio
I suspect this isn't actually needed and that releasepage will have
done the job, but convert it for now and we can delete it later.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-05-09 23:12:53 -04:00
Matthew Wilcox (Oracle)
4993474a21 orangefs: Convert to release_folio
Use folios throughout the release_folio path.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2022-05-09 23:12:33 -04:00
Matthew Wilcox (Oracle)
1a6417885b orangefs: Convert orangefs to read_folio
This is a full conversion which should be large folio ready, although
I have not tested it.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-05-09 16:21:46 -04:00
Matthew Wilcox (Oracle)
9d6b0cd757 fs: Remove flags parameter from aops->write_begin
There are no more aop flags left, so remove the parameter.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-05-08 14:28:19 -04:00
Matthew Wilcox (Oracle)
b7446e7cf1 fs: Remove aop flags parameter from grab_cache_page_write_begin()
There are no more aop flags left, so remove the parameter.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-05-08 14:28:19 -04:00
Matthew Wilcox (Oracle)
187c82cb03 fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
These filesystems use __set_page_dirty_nobuffers() either directly or
with a very thin wrapper; convert them en masse.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15 08:34:38 -04:00
Matthew Wilcox (Oracle)
eabf038f4e orangefs: Convert launder_page to launder_folio
OrangeFS launders its pages from a number of locations, so add a
small amount of folio usage to its callers where it makes sense.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15 08:23:30 -04:00
Matthew Wilcox (Oracle)
2a40be8125 orangefs: Convert from invalidatepage to invalidate_folio
This is a straightforward conversion.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15 08:23:30 -04:00
Christoph Hellwig
ccdf774189 mm: don't include <linux/blkdev.h> in <linux/backing-dev.h>
Move inode_to_bdi out of line to avoid having to include blkdev.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:01 -06:00
Amir Goldstein
4f911138c8 fs: add generic helper for filling statx attribute flags
The immutable and append-only properties on an inode are published on
the inode's i_flags and enforced by the VFS.

Create a helper to fill the corresponding STATX_ATTR_ flags in the kstat
structure from the inode's i_flags.

Only orange was converted to use this helper.
Other filesystems could use it in the future.

Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-08-17 11:47:43 +02:00
Mike Marshall
24523e45b4 orangefs: readahead adjustment
Matthew Wilcox suggested that perhaps it could be "possible for
rac->file to be NULL if the caller doesn't have a struct file"...

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2021-06-28 08:39:20 -04:00
Mike Marshall
0c4b7cadd1 Orangef: implement orangefs_readahead.
Also remove open-coded readahead logic from orangefs_readpage.

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2021-04-28 07:33:04 -04:00
Miklos Szeredi
1f26b0627b orangefs: convert to fileattr
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Mike Marshall <hubcap@omnibond.com>
2021-04-12 15:04:29 +02:00
Christian Brauner
549c729771
fs: make helpers idmap mount aware
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:20 +01:00
Christian Brauner
0d56a4518d
stat: handle idmapped mounts
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:17 +01:00
Christian Brauner
e65ce2a50c
acl: handle idmapped mounts
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.

The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.

In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.

Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:17 +01:00
Christian Brauner
2f221d6f7b
attr: handle idmapped mounts
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:16 +01:00
Christian Brauner
47291baa8d
namei: make permission helpers idmapped mount aware
The two helpers inode_permission() and generic_permission() are used by
the vfs to perform basic permission checking by verifying that the
caller is privileged over an inode. In order to handle idmapped mounts
we extend the two helpers with an additional user namespace argument.
On idmapped mounts the two helpers will make sure to map the inode
according to the mount's user namespace and then peform identical
permission checks to inode_permission() and generic_permission(). If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-6-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:16 +01:00
Guoqing Jiang
4c42be38c2 orangefs: use attach/detach_page_private
Since the new pair function is introduced, we can call them to clean the
code in orangefs.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Mike Marshall <hubcap@omnibond.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Brandenburg <martin@omnibond.com>
Link: http://lkml.kernel.org/r/20200517214718.468-9-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:08 -07:00
Mike Marshall
ec95f1dedc orangefs: get rid of knob code...
Christoph Hellwig sent in a reversion of "orangefs: remember count
when reading." because:

  ->read_iter calls can race with each other and one or
  more ->flush calls. Remove the the scheme to store the read
  count in the file private data as is is completely racy and
  can cause use after free or double free conditions

Christoph's reversion caused Orangefs not to work or to compile. I
added a patch that fixed that, but intel's kbuild test robot pointed
out that sending Christoph's patch followed by my patch upstream, it
would break bisection because of the failure to compile. So I have
combined the reversion plus my patch... here's the commit message
that was in my patch:

  Logically, optimal Orangefs "pages" are 4 megabytes. Reading
  large Orangefs files 4096 bytes at a time is like trying to
  kick a dead whale down the beach. Before Christoph's "Revert
  orangefs: remember count when reading." I tried to give users
  a knob whereby they could, for example, use "count" in
  read(2) or bs with dd(1) to get whatever they considered an
  appropriate amount of bytes at a time from Orangefs and fill
  as many page cache pages as they could at once.

  Without the racy code that Christoph reverted Orangefs won't
  even compile, much less work. So this replaces the logic that
  used the private file data that Christoph reverted with
  a static number of bytes to read from Orangefs.

  I ran tests like the following to determine what a
  reasonable static number of bytes might be:

  dd if=/pvfsmnt/asdf of=/dev/null count=128 bs=4194304
  dd if=/pvfsmnt/asdf of=/dev/null count=256 bs=2097152
  dd if=/pvfsmnt/asdf of=/dev/null count=512 bs=1048576
                            .
                            .
                            .
  dd if=/pvfsmnt/asdf of=/dev/null count=4194304 bs=128

  Reads seem faster using the static number, so my "knob code"
  wasn't just racy, it wasn't even a good idea...

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: kbuild test robot <lkp@intel.com>
2020-04-08 09:38:51 -04:00
Mike Marshall
f9bbb68233 orangefs: posix open permission checking...
Orangefs has no open, and orangefs checks file permissions
on each file access. Posix requires that file permissions
be checked on open and nowhere else. Orangefs-through-the-kernel
needs to seem posix compliant.

The VFS opens files, even if the filesystem provides no
method. We can see if a file was successfully opened for
read and or for write by looking at file->f_mode.

When writes are flowing from the page cache, file is no
longer available. We can trust the VFS to have checked
file->f_mode before writing to the page cache.

The mode of a file might change between when it is opened
and IO commences, or it might be created with an arbitrary mode.

We'll make sure we don't hit EACCES during the IO stage by
using UID 0. Some of the time we have access without changing
to UID 0 - how to check?

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-12-04 08:52:55 -05:00
Colin Ian King
e6b998ab62 orangefs: remove redundant assignment to err
Variable err is initialized to a value that is never read and it
is re-assigned later.  The initialization is redundant and can
be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-09-12 14:17:16 -04:00
Martin Brandenburg
33713cd09c orangefs: truncate before updating size
Otherwise we race with orangefs_writepage/orangefs_writepages
which and does not expect i_size < page_offset.

Fixes xfstests generic/129.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:39:10 -04:00
Mike Marshall
dd59a6475c orangefs: copy Orangefs-sized blocks into the pagecache if possible.
->readpage looks in file->private_data to try and find out how the
userspace program set "count" in read(2) or with "dd bs=" or whatever.

->readpage uses "count" and inode->i_size to calculate how much
data Orangefs should deposit in the Orangefs shared buffer, and
remembers which slot the data is in.

After copying data from the Orangefs shared buffer slot into
"the page", readpage tries to increment through the pagecache index
and fill as many pages as it can from the extra data in the shared
buffer. Hopefully these extra pages will soon be needed by the vfs,
and they'll be in the pagecache already.

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2019-05-03 14:32:39 -04:00
Mike Marshall
4077a0f25b orangefs: pass slot index back to readpage.
When userspace deposits more than a page of data into the shared buffer,
we'll need to know which slot it is in when we get back to readpage
so that we can try to use the extra data to fill some extra pages.

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2019-05-03 14:32:39 -04:00
Martin Brandenburg
8f04e1be78 orangefs: add orangefs_revalidate_mapping
This is modeled after NFS, except our method is different.  We use a
simple timer to determine whether to invalidate the page cache.  This
is bound to perform.

This addes a sysfs parameter cache_timeout_msecs which controls the time
between page cache invalidations.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:39 -04:00
Martin Brandenburg
52e2d0a380 orangefs: write range tracking
Attach the actual range of bytes written to plus the responsible uid/gid
to each dirty page.  This information must be sent to the server when
the page is written out.

Now write_begin, page_mkwrite, and invalidatepage keep up with this
information.  There are several conditions where they must write out the
page immediately to store the new range.  Two non-contiguous ranges
cannot be stored on a single page.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
3e9dfc6e1e orangefs: move do_readv_writev to direct_IO
direct_IO was the only caller and all direct_IO did was call it,
so there's no use in having the code spread out into so many functions.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00