Add missed value to kprobe_multi link info to hold the stats of missed
kprobe_multi probe.
The missed counter gets incremented when fprobe fails the recursion
check or there's no rethook available for return probe. In either
case the attached bpf program is not executed.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-3-jolsa@kernel.org
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=AoVg
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue"
* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new xdp-rx-metadata-features member to netdev netlink
which exports a bitmask of supported kfuncs. Most of the patch
is autogenerated (headers), the only relevant part is netdev.yaml
and the changes in netdev-genl.c to marshal into netlink.
Example output on veth:
$ ip link add veth0 type veth peer name veth1 # ifndex == 12
$ ./tools/net/ynl/samples/netdev 12
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 12
veth1[12] xdp-features (23): basic redirect rx-sg xdp-rx-metadata-features (3): timestamp hash xdp-zc-max-segs=0
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from tests/common.h:9,
from tests/basic_api.h:5,
from main.c:2:
./linux/memblock.h:601:50: warning: ‘struct seq_file’ declared inside parameter list will not be visible outside of this definition or declaration
601 | static inline void memtest_report_meminfo(struct seq_file *m) { }
| ^~~~~~~~
Add declaration of 'struct seq_file' to tools/include/linux/seq_file.h
to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/linux/mm.h:14: warning: "__ALIGN_KERNEL" redefined
14 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
|
In file included from ../../include/linux/mm.h:6,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/uapi/linux/const.h:31: note: this is the location of the previous definition
31 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1)
|
Remove definitions of __ALIGN_KERNEL and __ALIGN_KERNEL_MASK from
tools/include/linux/mm.h to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
This patch fix the follow errors.
commit 61167ad5fe ("mm: pass nid to reserve_bootmem_region()") pass nid
parameter to reserve_bootmem_region(),
$ make -C tools/testing/memblock/
...
memblock.c: In function ‘memmap_init_reserved_pages’:
memblock.c:2111:25: error: too many arguments to function ‘reserve_bootmem_region’
2111 | reserve_bootmem_region(start, end, nid);
| ^~~~~~~~~~~~~~~~~~~~~~
../../include/linux/mm.h:32:6: note: declared here
32 | void reserve_bootmem_region(phys_addr_t start, phys_addr_t end);
| ^~~~~~~~~~~~~~~~~~~~~~
memblock.c:2122:17: error: too many arguments to function ‘reserve_bootmem_region’
2122 | reserve_bootmem_region(start, end, nid);
| ^~~~~~~~~~~~~~~~~~~~~~
commit dcdfdd40fa ("mm: Add support for unaccepted memory") call
accept_memory() in memblock.c
$ make -C tools/testing/memblock/
...
cc -fsanitize=address -fsanitize=undefined main.o memblock.o \
lib/slab.o mmzone.o slab.o tests/alloc_nid_api.o \
tests/alloc_helpers_api.o tests/alloc_api.o tests/basic_api.o \
tests/common.o tests/alloc_exact_nid_api.o -o main
/usr/bin/ld: memblock.o: in function `memblock_alloc_range_nid':
memblock.c:(.text+0x7ae4): undefined reference to `accept_memory'
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Fixes: dcdfdd40fa ("mm: Add support for unaccepted memory")
Fixes: 61167ad5fe ("mm: pass nid to reserve_bootmem_region()")
Link: https://lore.kernel.org/r/tencent_6F19BC082167F15DF2A8D8BEFE8EF220F60A@qq.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Picking the changes from:
ad9ee11fdf ("drm/doc: document that PRIME import/export is always supported")
2ff4f6d410 ("drm/doc: document drm_event and its types")
9a2eabf48a ("drm/doc: use proper cross-references for sections")
c7a4722971 ("drm/syncobj: add IOCTL to register an eventfd")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2023-09-13 08:54:45.170134002 -0300
+++ after 2023-09-13 08:55:06.612712776 -0300
@@ -108,6 +108,7 @@
[0xCC] = "SYNCOBJ_TRANSFER",
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
[0xCE] = "MODE_GETFB2",
+ [0xCF] = "SYNCOBJ_EVENTFD",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Ser <contact@emersion.fr>
Link: https://lore.kernel.org/lkml/ZQGkh9qlhpKA%2FSMY@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new 'perf bench' for sched-seccomp-notify uses defines and types not
available in older systems where we want to have perf available, so grab
a copy of this UAPI from the kernel sources to allow that.
This will be checked in the future for drift from the original when we
build the perf tool, that will warn when that happens like:
make: Entering directory '/var/home/acme/git/perf-tools/tools/perf'
BUILD: Doing 'make -j32' parallel build
Warning: Kernel ABI header differences:
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZQGhMXtwX7RvV3ya@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr'
can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality
and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated.
Also make changes in selftests/bpf/test_bpftool_synctypes.py
and selftest libbpf_str to fix otherwise test errors.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152837.2003563-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmTt1ZoSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkgFUP/REFaYWdWUvAzmWeezyx9dqgZMfSOjWq
9QvySiA94OAOcjIYkb7wfzQ5BBAZqaBQ/f8XqWwS1EDDDEBs8sP1cxmABKwW7Hsr
qFRu2sOqLzKBk223d0jIgEocfQaFpGbF71gXoTlDivBjBi5UxWm9bF0XnbYWcKgO
/QEvzNosi9uNdi85Fzmv62J6YzAdidEpwGsM7X2CfejwNRmStxAEg/NwvRR0Hyiq
OJCo97omEgTRaUle8nc64PDx33u4h5kQ1BkaeHEv0rbE3hftFC2YPKn/InmqSFGz
6ew2xnrGPR37LCuAiCcIIv6yR7K0eu0iYJ7jXwZxBDqxGavEPuwWGBoCP6qFiitH
ZLWhIrAUrdmSbySkTOCONhJ475qFAuQoYHYpZnX/bJZUHlSsb/9lwDJYJQGpVfd1
/daqJVSb7lhaifmNO1iNd/ibCIXq9zapwtkRwA897M8GkZBTsnVvazFld1Em+Se3
Bx6DSDUVBqVQ9fpZG2IAGD6odDwOzC1lF2IoceFvK9Ff6oE0psI+A0qNLMkHxZbW
Qlo7LsNe53hpoCC+yHTfXX7e/X8eNt0EnCGOQJDusZ0Nr3K7H4LKFA0i8UBUK05n
4lKnnaSQW7GQgdofLWt103OMDR9GoDxpFsm7b1X9+AEk6Fz6tq50wWYeMZETUKYP
DCW8VGFOZjZM
=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
This nolibc update for Linux 6.6-rc1 consists of:
Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts,
path to log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer
-----BEGIN PGP SIGNATURE-----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=OCH0
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts, path to
log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer"
* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
tools/nolibc: avoid undesired casts in the __sysret() macro
tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
tools/nolibc: silence ppc64 compile warnings
selftests/nolibc: libc-test: use HOSTCC instead of CC
tools/nolibc: stackprotector.h: make __stack_chk_init static
selftests/nolibc: allow report with existing test log
selftests/nolibc: add test support for ppc64
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc
selftests/nolibc: add XARCH and ARCH mapping support
tools/nolibc: add support for powerpc64
tools/nolibc: add support for powerpc
MAINTAINERS: nolibc: add myself as co-maintainer
selftests/nolibc: enable compiler warnings
selftests/nolibc: don't strip nolibc-test
selftests/nolibc: prevent out of bounds access in expect_vfprintf
selftests/nolibc: use correct return type for read() and write()
selftests/nolibc: avoid sign-compare warnings
selftests/nolibc: avoid unused parameter warnings
selftests/nolibc: make functions static if possible
...
Having __sysret() as an inline function has the unfortunate effect of
adding casts and large constants comparisons after the syscall returns
that significantly inflate some light code that's otherwise syscall-
heavy. Even nolibc-test grew by ~1%.
Let's switch back to a macro for this, and use it only with signed
arguments. Note that it is also possible to design a slightly more
complex macro covering unsigned and pointers but we only have 3 such
syscalls so it is pointless, and these were just addressed not to use
this macro anymore. Now for the argument (the local variable containing
the syscall return value), any negative value is an error, that results
in -1 being returned and errno to be assigned the opposite value.
This may be revisited again in the future if really needed but for now
let's get back to something sane.
Fixes: 428905da6e ("tools/nolibc: sys.h: add a syscall return helper")
Link: https://lore.kernel.org/lkml/20230806095846.GB10627@1wt.eu/
Link: https://lore.kernel.org/lkml/ZNKOJY+g66nkIyvv@1wt.eu/
Cc: Zhangjin Wu <falcon@tinylab.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The __sysret() function causes some undesirable casts so we'll revert
it. In order to keep it simple it will now only support integer return
values like in the past, so we must basically revert the changes that
were made to these 3 syscalls which return a pointer so that they
simply rely on their own test and the SET_ERRNO() macro.
Fixes: 4201cfce15 ("tools/nolibc: clean up sbrk() routine")
Fixes: 924e9539ae ("tools/nolibc: clean up mmap() routine")
Fixes: d27447bc2e ("tools/nolibc: sys.h: apply __sysret() helper")
Link: https://lore.kernel.org/lkml/20230806095846.GB10627@1wt.eu/
Link: https://lore.kernel.org/lkml/ZNKOJY+g66nkIyvv@1wt.eu/
Cc: Zhangjin Wu <falcon@tinylab.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Silence the following warnings reported by the new -Wall -Wextra options
with pure assembly code.
In file included from sysroot/powerpc/include/stdio.h:13,
from nolibc-test.c:13:
sysroot/powerpc/include/arch.h: In function '_start':
sysroot/powerpc/include/arch.h:192:32: warning: unused variable 'r2' [-Wunused-variable]
192 | register volatile long r2 __asm__ ("r2") = (void *)&TOC - (void *)_start;
| ^~
sysroot/powerpc/include/arch.h:187:97: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var]
187 | void __attribute__((weak, noreturn, optimize("Os", "omit-frame-pointer"))) __no_stack_protector _start(void)
| ^~~~~~
Since only elfv2 ABI requires to save the TOC/GOT pointer to r2
register, when using elfv1 ABI, the old C code is simply ignored by the
compiler, but the compiler can not ignore the inline assembly code and
will introduce build failure or running segfaults. So, let's further
only add the new assembly code for elfv2 ABI with the checking of
_CALL_ELF == 2.
Link: https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.pdf
Link: https://www.llvm.org/devmtg/2014-04/PDFs/Talks/Euro-LLVM-2014-Weigand.pdf
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This allows to generate smaller text/data/dec size.
As the _start_c() function added by crt.h, __stack_chk_init() is called
from _start_c() instead of the assembly _start. So, it is able to mark
it with static now.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This follows the 64-bit PowerPC ABI [1], refers to the slides: "A new
ABI for little-endian PowerPC64 Design & Implementation" [2] and the
musl code in arch/powerpc64/crt_arch.h.
First, stdu and clrrdi are used instead of stwu and clrrwi for
powerpc64.
Second, the stack frame size is increased to 32 bytes for powerpc64, 32
bytes is the minimal stack frame size supported described in [2].
Besides, the TOC pointer (GOT pointer) must be saved to r2.
This works on both little endian and big endian 64-bit PowerPC.
[1]: https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.pdf
[2]: https://www.llvm.org/devmtg/2014-04/PDFs/Talks/Euro-LLVM-2014-Weigand.pdf
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Both syscall declarations and _start code definition are added for
powerpc to nolibc.
Like mips, powerpc uses a register (exactly, the summary overflow bit)
to record the error occurred, and uses another register to return the
value [1]. So, the return value of every syscall declaration must be
normalized to match the __sysret() helper, return -value when there is
an error, otheriwse, return value directly.
Glibc and musl use different methods to check the summary overflow bit,
glibc (sysdeps/unix/sysv/linux/powerpc/sysdep.h) saves the cr register
to r0 at first, and then check the summary overflow bit in cr0:
mfcr r0
r0 & (1 << 28) ? -r3 : r3
-->
10003c14: 7c 00 00 26 mfcr r0
10003c18: 74 09 10 00 andis. r9,r0,4096
10003c1c: 41 82 00 08 beq 0x10003c24
10003c20: 7c 63 00 d0 neg r3,r3
Musl (arch/powerpc/syscall_arch.h) directly checks the summary overflow
bit with the 'bns' instruction, it is smaller:
/* no summary overflow bit means no error, return value directly */
bns+ 1f
/* otherwise, return negated value */
neg r3, r3
1:
-->
10000418: 40 a3 00 08 bns 0x10000420
1000041c: 7c 63 00 d0 neg r3,r3
Like musl, Linux (arch/powerpc/include/asm/vdso/gettimeofday.h) uses the
same method for do_syscall_2() too.
Here applies the second method to get smaller size.
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Otherwise both gcc and clang may generate warnings about type
mismatches:
sysroot/mips/include/string.h:12:14: warning: mismatch in argument 1 type of built-in function 'malloc'; expected 'unsigned int' [-Wbuiltin-declaration-mismatch]
12 | static void *malloc(size_t len);
| ^~~~~~
The compiler provides __SIZE_TYPE__ as the type that corresponds to size_t
(typically "long unsigned int" or "unsigned int"). It was verified to be
available at least since gcc-3.4 and clang-3.8, so from now on we'll use
this definition for size_t.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20230805161929.GA15284@1wt.eu/
Signed-off-by: Willy Tarreau <w@1wt.eu>
getauxval() returns an unsigned long but the overall type of the ternary
operator needs to be signed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This warning will be enabled later so avoid triggering it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It's documented as returning int which is also implemented by glibc and
musl, so adopt that return type.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
According to manual page [1], posix spec [2] and source code like
arch/mips/kernel/syscall.c, for historic reasons, the sys_pipe() syscall
on some architectures has an unusual calling convention. It returns
results in two registers which means there is no need for it to do
verify the validity of a userspace pointer argument. Historically that
used to be expensive in Linux. These days the performance advantage is
negligible.
Nolibc doesn't support the unusual calling convention above, luckily
Linux provides a generic sys_pipe2() with an additional flags argument
from 2.6.27. If flags is 0, then pipe2() is the same as pipe(). So here
we use sys_pipe2() to implement the pipe().
pipe2() is also provided to allow users to use flags argument on demand.
[1]: https://man7.org/linux/man-pages/man2/pipe.2.html
[2]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/pipe.html
Suggested-by: Zhangjin Wu <falcon@tinylab.org>
Link: https://lore.kernel.org/all/20230729100401.GA4577@1wt.eu/
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Add a minimal implementation of setvbuf(), which error checks the mode
argument (as required by spec) and returns. Since nolibc never buffers
output, nothing needs to be done.
The kselftest framework recently added a call to setvbuf(). As a result,
any tests that use the kselftest framework and nolibc cause a compiler
error due to missing function. This provides an urgent fix for the
problem which is preventing arm64 testing on linux-next.
Example:
clang --target=aarch64-linux-gnu -fintegrated-as
-Werror=unknown-warning-option -Werror=ignored-optimization-argument
-Werror=option-ignored -Werror=unused-command-line-argument
--target=aarch64-linux-gnu -fintegrated-as
-fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib \
-include ../../../../include/nolibc/nolibc.h -I../..\
-static -ffreestanding -Wall za-fork.c
build/kselftest/arm64/fp/za-fork-asm.o
-o build/kselftest/arm64/fp/za-fork
In file included from <built-in>:1:
In file included from ./../../../../include/nolibc/nolibc.h:97:
In file included from ./../../../../include/nolibc/arch.h:25:
./../../../../include/nolibc/arch-aarch64.h:178:35: warning: unknown
attribute 'optimize' ignored [-Wunknown-attributes]
void __attribute__((weak,noreturn,optimize("omit-frame-pointer")))
__no_stack_protector _start(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from za-fork.c:12:
../../kselftest.h:123:2: error: call to undeclared function 'setvbuf';
ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
setvbuf(stdout, NULL, _IOLBF, 0);
^
../../kselftest.h:123:24: error: use of undeclared identifier '_IOLBF'
setvbuf(stdout, NULL, _IOLBF, 0);
^
1 warning and 2 errors generated.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYus3Z8r2cg3zLv8uH8MRrzLFVWdnor02SNr=rCz+_WGVg@mail.gmail.com/
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Also clean up the instructions in delayed slots.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As suggested by Thomas, It is able to move the stackprotector
initialization from the assembly _start to the beginning of the new
_start_c(). Let's call __stack_chk_init() in _start_c() as a
preparation.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/a00284a6-54b1-498c-92aa-44997fa78403@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Let's define an empty __stack_chk_init for the !_NOLIBC_STACKPROTECTOR
branch.
This allows to remove #ifdef around every call of __stack_chk_init().
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As the environ and _auxv support added for nolibc, the assembly _start
function becomes more and more complex and therefore makes the porting
of nolibc to new architectures harder and harder.
To simplify portability, this C version of _start_c() is added to do
most of the assembly start operations in C, which reduces the complexity
a lot and will eventually simplify the porting of nolibc to the new
architectures.
The new _start_c() only requires a stack pointer argument, it will find
argc, argv, envp/environ and _auxv for us, and then call main(),
finally, it exit() with main's return status. With this new _start_c(),
the future new architectures only require to add very few assembly
instructions.
As suggested by Thomas, users may use a different signature of main
(e.g. void main(void)), a _nolibc_main alias is added for main to
silence the warning about potential conflicting types.
As suggested by Willy, the code is carefully polished for both smaller
size and better readability with local variables and the right types.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230715095729.GC24086@1wt.eu/
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/90fdd255-32f4-4caf-90ff-06456b53dac3@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The statx manpage [1] shows that it has been supported from Linux 4.11
and glibc 2.28, the Linux support can be checked for all of the
architectures with this command:
$ git grep -r statx v4.11 arch/ include/uapi/asm-generic/unistd.h \
| grep -E "aarch64|arm|mips|s390|x86|:include/uapi"
Besides riscv and loongarch, all of the nolibc supported architectures
have added sys_statx from Linux v4.11. riscv is mainlined to v4.15,
loongarch is mainlined to v5.19, both of them use the generic unistd.h,
so, they have added sys_statx from their first mainline versions.
The current oldest stable branch is v4.14, only reserving sys_statx
still preserves compatibility with all of the supported stable branches,
So, let's remove the old arch related and dependent sys_stat support
completely.
This is friendly to the future new architecture porting.
[1]: https://man7.org/linux/man-pages/man2/statx.2.html
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As gcc doc [1] shows:
Most optimizations are completely disabled at -O0 or if an -O level is
not set on the command line, even if individual optimization flags are
specified.
Test result [2] shows, gcc>=11.1.0 deviates from the above description,
but before gcc 11.1.0, "-O0" still forcely uses frame pointer in the
_start function even if the individual optimize("omit-frame-pointer")
flag is specified.
The frame pointer related operations will change the stack pointer (e.g.
In x86_64, an extra "push %rbp" will be inserted at the beginning of
_start) and make it differs from the one we expected, as a result, break
the whole startup function.
To fix up this issue, as suggested by Thomas, the individual "Os" and
"omit-frame-pointer" optimize flags are used together on _start function
to disable frame pointer completely even if the -O0 is set on the
command line.
[1]: https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
[2]: https://lore.kernel.org/lkml/20230714094723.140603-1-falcon@tinylab.org/
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/34b21ba5-7b59-4b3b-9ed6-ef9a3a5e06f7@t-8ch.de/
Fixes: 7f85485896 ("tools/nolibc: make compiler and assembler agree on the section around _start")
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Fix up such errors reported by scripts/checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
#148: FILE: tools/include/nolibc/arch-aarch64.h:148:
+void __attribute__((weak,noreturn,optimize("omit-frame-pointer"))) __no_stack_protector _start(void)
^
ERROR: space required after that ',' (ctx:VxV)
#148: FILE: tools/include/nolibc/arch-aarch64.h:148:
+void __attribute__((weak,noreturn,optimize("omit-frame-pointer"))) __no_stack_protector _start(void)
^
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
In commit 52e423f5b9 ("tools/nolibc: export environ as a weak symbol on i386")
and friends the asm startup logic was extended to directly populate the
"environ" array.
This makes it impossible for "environ" to be dropped by the linker.
Therefore also drop the other logic to handle non-present "environ".
Also add a testcase to validate the initialization of environ.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
a reverse operation of mkdir() is meaningful, add rmdir() here.
required by nolibc-test to remove /proc while CONFIG_PROC_FS is not
enabled.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Both glibc and musl provide RB_ flags via <sys/reboot.h> for reboot(),
they don't need to include <linux/reboot.h>, let nolibc provide RB_
flags too.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Fix up the error reported by scripts/checkpatch.pl:
ERROR: do not use assignment in if condition
#95: FILE: tools/include/nolibc/sys.h:95:
+ if ((ret = sys_brk(0)) && (sys_brk(ret + inc) == ret + inc))
Apply the new generic __sysret() to merge the SET_ERRNO() and return
lines.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Do several cleanups together:
- Since all supported architectures have my_syscall6() now, remove the
#ifdef check.
- Move the mmap() related macros to tools/include/nolibc/types.h and
reuse most of them from <linux/mman.h>
- Apply the new generic __sysret() to convert the calling of sys_map()
to oneline code
Note, since MAP_FAILED is -1 on Linux, so we can use the generic
__sysret() which returns -1 upon error and still satisfy user land that
checks for MAP_FAILED.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702192347.GJ16233@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
No official reference states the errno range, here aligns with musl and
glibc and uses [-MAX_ERRNO, -1] instead of all negative ones.
- musl: src/internal/syscall_ret.c
- glibc: sysdeps/unix/sysv/linux/sysdep.h
The MAX_ERRNO used by musl and glibc is 4095, just like the one nolibc
defined in tools/include/nolibc/errno.h.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZKKdD%2Fp4UkEavru6@1wt.eu/
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Link: https://lore.kernel.org/linux-riscv/94dd5170929f454fbc0a10a2eb3b108d@AcuMS.aculab.com/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It is able to pass the 6th argument like the 5th argument via the stack
for mips, let's add a new my_syscall6() now, see [1] for details:
The mips/o32 system call convention passes arguments 5 through 8 on
the user stack.
Both mmap() and pselect6() require my_syscall6().
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
my_syscall<N> share the same long clobber list, define a macro for them.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
my_syscall<N> share the same long clobber list, define a macro for them.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
replace "__asm__ volatile" with "__asm__ volatile" and insert necessary
whitespace before "\" to make sure the lines are aligned.
$ sed -i -e 's/__asm__ volatile ( /__asm__ volatile ( /g' tools/include/nolibc/*.h
Note, arch-s390.h uses post-tab instead of post-whitespaces, must avoid
insert whitespace just before the tabs:
$ sed -i -e 's/__asm__ volatile (\t/__asm__ volatile (\t/g' tools/include/nolibc/arch-*.h
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
More than 8 whitespaces of the code indent are replaced with "tab +
whitespaces" to fix up such errors reported by scripts/checkpatch.pl:
ERROR: code indent should use tabs where possible
#64: FILE: tools/include/nolibc/arch-mips.h:64:
+^I \$
ERROR: code indent should use tabs where possible
#72: FILE: tools/include/nolibc/arch-mips.h:72:
+^I "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \$
This command is used:
$ sed -i -e '/^\t* /{s/ /\t/g}' tools/include/nolibc/arch-*.h
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Adding support to specify pid for uprobe_multi link and the uprobes
are created only for task with given pid value.
Using the consumer.filter filter callback for that, so the task gets
filtered during the uprobe installation.
We still need to check the task during runtime in the uprobe handler,
because the handler could get executed if there's another system
wide consumer on the same uprobe (thanks Oleg for the insight).
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to specify cookies array for uprobe_multi link.
The cookies array share indexes and length with other uprobe_multi
arrays (offsets/ref_ctr_offsets).
The cookies[i] value defines cookie for i-the uprobe and will be
returned by bpf_get_attach_cookie helper when called from ebpf
program hooked to that specific uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new multi uprobe link that allows to attach bpf program
to multiple uprobes.
Uprobes to attach are specified via new link_create uprobe_multi
union:
struct {
__aligned_u64 path;
__aligned_u64 offsets;
__aligned_u64 ref_ctr_offsets;
__u32 cnt;
__u32 flags;
} uprobe_multi;
Uprobes are defined for single binary specified in path and multiple
calling sites specified in offsets array with optional reference
counters specified in ref_ctr_offsets array. All specified arrays
have length of 'cnt'.
The 'flags' supports single bit for now that marks the uprobe as
return probe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switching BPF_F_KPROBE_MULTI_RETURN macro to anonymous enum,
so it'd show up in vmlinux.h. There's not functional change
compared to having this as macro.
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support for bpf_get_func_ip helper for uprobe program to return
probed address for both uprobe and return uprobe.
We discussed this in [1] and agreed that uprobe can have special use
of bpf_get_func_ip helper that differs from kprobe.
The kprobe bpf_get_func_ip returns:
- address of the function if probe is attach on function entry
for both kprobe and return kprobe
- 0 if the probe is not attach on function entry
The uprobe bpf_get_func_ip returns:
- address of the probe for both uprobe and return uprobe
The reason for this semantic change is that kernel can't really tell
if the probe user space address is function entry.
The uprobe program is actually kprobe type program attached as uprobe.
One of the consequences of this design is that uprobes do not have its
own set of helpers, but share them with kprobes.
As we need different functionality for bpf_get_func_ip helper for uprobe,
I'm adding the bool value to the bpf_trace_run_ctx, so the helper can
detect that it's executed in uprobe context and call specific code.
The is_uprobe bool is set as true in bpf_prog_run_array_sleepable, which
is currently used only for executing bpf programs in uprobe.
Renaming bpf_prog_run_array_sleepable to bpf_prog_run_array_uprobe
to address that it's only used for uprobes and that it sets the
run_ctx.is_uprobe as suggested by Yafang Shao.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
[1] https://lore.kernel.org/bpf/CAEf4BzZ=xLVkG5eurEuvLU79wAMtwho7ReR+XJAgwhFF4M-7Cg@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-2-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Use __sysret() to shrink most of the library routines to oneline code.
Removed 266 lines of duplicated code.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Use __sysret() to shrink the whole _syscall() to oneline code.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Most of the library routines share the same syscall return logic:
In general, a 0 return value indicates success. A -1 return value
indicates an error, and an error number is stored in errno. [1]
Let's add a __sysret() helper for the above logic to simplify the coding
and shrink the code lines too.
Thomas suggested to use inline function instead of macro for __sysret().
Willy suggested to make __sysret() be always inline.
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/linux-riscv/ZH1+hkhiA2+ItSvX@1wt.eu/
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/ea4e7442-7223-4211-ba29-70821e907888@t-8ch.de/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Compiling nolibc for rv32 got such errors:
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_gettimeofday’:
nolibc/sysroot/riscv/include/sys.h:557:21: error: ‘__NR_gettimeofday’ undeclared (first use in this function); did you mean ‘sys_gettimeofday’?
557 | return my_syscall2(__NR_gettimeofday, tv, tz);
| ^~~~~~~~~~~~~~~~~
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_lseek’:
nolibc/sysroot/riscv/include/sys.h:675:21: error: ‘__NR_lseek’ undeclared (first use in this function)
675 | return my_syscall3(__NR_lseek, fd, offset, whence);
| ^~~~~~~~~~
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_wait4’:
nolibc/sysroot/riscv/include/sys.h:1341:21: error: ‘__NR_wait4’ undeclared (first use in this function)
1341 | return my_syscall4(__NR_wait4, pid, status, options, rusage);
If a syscall macro is not supported by a target platform, wrap it with
'#ifdef' and 'return -ENOSYS' for the '#else' branch, which lets the
other syscalls work as-is and allows developers to fix up the test
failures reported by nolibc-test one by one later.
This wraps all of the failed syscall macros with '#ifdef' and 'return
-ENOSYS' for the '#else' branch, so, all of the undeclared failures are
fixed.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@app.fastmail.com/
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Compiling nolibc for rv32 got such errors:
In file included from nolibc/sysroot/riscv/include/nolibc.h:99,
from nolibc/sysroot/riscv/include/errno.h:26,
from nolibc/sysroot/riscv/include/stdio.h:14,
from tools/testing/selftests/nolibc/nolibc-test.c:12:
nolibc/sysroot/riscv/include/sys.h:946:2: error: #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll()
946 | #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll()
| ^~~~~
nolibc/sysroot/riscv/include/sys.h:1062:2: error: #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select()
1062 | #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select()
If a syscall is not supported by a target platform, 'return -ENOSYS' is
better than '#error', which lets the other syscalls work as-is and
allows developers to fix up the test failures reported by nolibc-test
one by one later.
This converts all of the '#error' to 'return -ENOSYS', so, all of the
'#error' failures are fixed.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@app.fastmail.com/
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRdM/uy1Ege0+EN1fNar9k/UBDW4wUCZMvevwAKCRBar9k/UBDW
42Z0AP90hLZ9OmoghYAlALHLl8zqXuHCV8OeFXR5auqG+kkcCwEAx6h99vnh4zgP
Tngj6Yid60o39/IZXXblhV37HfSiyQ8=
=/kVE
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-03
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).
The main changes are:
1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
Daniel Borkmann
2) Support new insns from cpu v4 from Yonghong Song
3) Non-atomically allocate freelist during prefill from YiFei Zhu
4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu
5) Add tracepoint to xdp attaching failure from Leon Hwang
6) struct netdev_rx_queue and xdp.h reshuffling to reduce
rebuild time from Jakub Kicinski
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
net: invert the netdevice.h vs xdp.h dependency
net: move struct netdev_rx_queue out of netdevice.h
eth: add missing xdp.h includes in drivers
selftests/bpf: Add testcase for xdp attaching failure tracepoint
bpf, xdp: Add tracepoint to xdp attaching failure
selftests/bpf: fix static assert compilation issue for test_cls_*.c
bpf: fix bpf_probe_read_kernel prototype mismatch
riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
libbpf: fix typos in Makefile
tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
netfilter: bpf: Only define get_proto_defrag_hook() if necessary
bpf: Fix an array-index-out-of-bounds issue in disasm.c
net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
docs/bpf: Fix malformed documentation
bpf: selftests: Add defrag selftests
bpf: selftests: Support custom type and proto for client sockets
bpf: selftests: Support not connecting client socket
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
...
====================
Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds support for enabling IP defrag using pre-existing
netfilter defrag support. Basically all the flag does is bump a refcnt
while the link the active. Checks are also added to ensure the prog
requesting defrag support is run _after_ netfilter defrag hooks.
We also take care to avoid any issues w.r.t. module unloading -- while
defrag is active on a link, the module is prevented from unloading.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/5cff26f97e55161b7d56b09ddcf5f8888a5add1d.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Also add support to pass topdir to ynl-regen.sh (Jakub) and call
it from the makefile to update the UAPI headers.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230727163001.3952878-4-sdf@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add interpreter/jit support for new sign-extension load insns
which adds a new mode (BPF_MEMSX).
Also add verifier support to recognize these insns and to
do proper verification with new insns. In verifier, besides
to deduce proper bounds for the dst_reg, probed memory access
is also properly handled.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011156.3711870-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT
sockets. This means we can't use the helper to steer traffic to Envoy,
which configures SO_REUSEPORT on its sockets. In turn, we're blocked
from removing TPROXY from our setup.
The reason that bpf_sk_assign refuses such sockets is that the
bpf_sk_lookup helpers don't execute SK_REUSEPORT programs. Instead,
one of the reuseport sockets is selected by hash. This could cause
dispatch to the "wrong" socket:
sk = bpf_sk_lookup_tcp(...) // select SO_REUSEPORT by hash
bpf_sk_assign(skb, sk) // SK_REUSEPORT wasn't executed
Fixing this isn't as simple as invoking SK_REUSEPORT from the lookup
helpers unfortunately. In the tc context, L2 headers are at the start
of the skb, while SK_REUSEPORT expects L3 headers instead.
Instead, we execute the SK_REUSEPORT program when the assigned socket
is pulled out of the skb, further up the stack. This creates some
trickiness with regards to refcounting as bpf_sk_assign will put both
refcounted and RCU freed sockets in skb->sk. reuseport sockets are RCU
freed. We can infer that the sk_assigned socket is RCU freed if the
reuseport lookup succeeds, but convincing yourself of this fact isn't
straight forward. Therefore we defensively check refcounting on the
sk_assign sock even though it's probably not required in practice.
Fixes: 8e368dc72e ("bpf: Fix use of sk->sk_reuseport from sk_assign")
Fixes: cf7fbe660f ("bpf: Add socket assign support")
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Stringer <joe@cilium.io>
Link: https://lore.kernel.org/bpf/CACAyw98+qycmpQzKupquhkxbvWK4OFyDuuLMBNROnfWMZxUWeA@mail.gmail.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-7-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Seeing the following:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
...so sync tools version missing some list_node/rb_tree fields.
Fixes: c3c510ce43 ("bpf: Add 'owner' field to bpf_{list,rb}_node")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20230719162257.20818-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work refactors and adds a lightweight extension ("tcx") to the tc BPF
ingress and egress data path side for allowing BPF program management based
on fds via bpf() syscall through the newly added generic multi-prog API.
The main goal behind this work which we also presented at LPC [0] last year
and a recent update at LSF/MM/BPF this year [3] is to support long-awaited
BPF link functionality for tc BPF programs, which allows for a model of safe
ownership and program detachment.
Given the rise in tc BPF users in cloud native environments, this becomes
necessary to avoid hard to debug incidents either through stale leftover
programs or 3rd party applications accidentally stepping on each others toes.
As a recap, a BPF link represents the attachment of a BPF program to a BPF
hook point. The BPF link holds a single reference to keep BPF program alive.
Moreover, hook points do not reference a BPF link, only the application's
fd or pinning does. A BPF link holds meta-data specific to attachment and
implements operations for link creation, (atomic) BPF program update,
detachment and introspection. The motivation for BPF links for tc BPF programs
is multi-fold, for example:
- From Meta: "It's especially important for applications that are deployed
fleet-wide and that don't "control" hosts they are deployed to. If such
application crashes and no one notices and does anything about that, BPF
program will keep running draining resources or even just, say, dropping
packets. We at FB had outages due to such permanent BPF attachment
semantics. With fd-based BPF link we are getting a framework, which allows
safe, auto-detachable behavior by default, unless application explicitly
opts in by pinning the BPF link." [1]
- From Cilium-side the tc BPF programs we attach to host-facing veth devices
and phys devices build the core datapath for Kubernetes Pods, and they
implement forwarding, load-balancing, policy, EDT-management, etc, within
BPF. Currently there is no concept of 'safe' ownership, e.g. we've recently
experienced hard-to-debug issues in a user's staging environment where
another Kubernetes application using tc BPF attached to the same prio/handle
of cls_bpf, accidentally wiping all Cilium-based BPF programs from underneath
it. The goal is to establish a clear/safe ownership model via links which
cannot accidentally be overridden. [0,2]
BPF links for tc can co-exist with non-link attachments, and the semantics are
in line also with XDP links: BPF links cannot replace other BPF links, BPF
links cannot replace non-BPF links, non-BPF links cannot replace BPF links and
lastly only non-BPF links can replace non-BPF links. In case of Cilium, this
would solve mentioned issue of safe ownership model as 3rd party applications
would not be able to accidentally wipe Cilium programs, even if they are not
BPF link aware.
Earlier attempts [4] have tried to integrate BPF links into core tc machinery
to solve cls_bpf, which has been intrusive to the generic tc kernel API with
extensions only specific to cls_bpf and suboptimal/complex since cls_bpf could
be wiped from the qdisc also. Locking a tc BPF program in place this way, is
getting into layering hacks given the two object models are vastly different.
We instead implemented the tcx (tc 'express') layer which is an fd-based tc BPF
attach API, so that the BPF link implementation blends in naturally similar to
other link types which are fd-based and without the need for changing core tc
internal APIs. BPF programs for tc can then be successively migrated from classic
cls_bpf to the new tc BPF link without needing to change the program's source
code, just the BPF loader mechanics for attaching is sufficient.
For the current tc framework, there is no change in behavior with this change
and neither does this change touch on tc core kernel APIs. The gist of this
patch is that the ingress and egress hook have a lightweight, qdisc-less
extension for BPF to attach its tc BPF programs, in other words, a minimal
entry point for tc BPF. The name tcx has been suggested from discussion of
earlier revisions of this work as a good fit, and to more easily differ between
the classic cls_bpf attachment and the fd-based one.
For the ingress and egress tcx points, the device holds a cache-friendly array
with program pointers which is separated from control plane (slow-path) data.
Earlier versions of this work used priority to determine ordering and expression
of dependencies similar as with classic tc, but it was challenged that for
something more future-proof a better user experience is required. Hence this
resulted in the design and development of the generic attach/detach/query API
for multi-progs. See prior patch with its discussion on the API design. tcx is
the first user and later we plan to integrate also others, for example, one
candidate is multi-prog support for XDP which would benefit and have the same
'look and feel' from API perspective.
The goal with tcx is to have maximum compatibility to existing tc BPF programs,
so they don't need to be rewritten specifically. Compatibility to call into
classic tcf_classify() is also provided in order to allow successive migration
or both to cleanly co-exist where needed given its all one logical tc layer and
the tcx plus classic tc cls/act build one logical overall processing pipeline.
tcx supports the simplified return codes TCX_NEXT which is non-terminating (go
to next program) and terminating ones with TCX_PASS, TCX_DROP, TCX_REDIRECT.
The fd-based API is behind a static key, so that when unused the code is also
not entered. The struct tcx_entry's program array is currently static, but
could be made dynamic if necessary at a point in future. The a/b pair swap
design has been chosen so that for detachment there are no allocations which
otherwise could fail.
The work has been tested with tc-testing selftest suite which all passes, as
well as the tc BPF tests from the BPF CI, and also with Cilium's L4LB.
Thanks also to Nikolay Aleksandrov and Martin Lau for in-depth early reviews
of this work.
[0] https://lpc.events/event/16/contributions/1353/
[1] https://lore.kernel.org/bpf/CAEf4BzbokCJN33Nw_kg82sO=xppXnKWEncGTWCTB9vGCmLB6pw@mail.gmail.com
[2] https://colocatedeventseu2023.sched.com/event/1Jo6O/tales-from-an-ebpf-programs-murder-mystery-hemanth-malla-guillaume-fournier-datadog
[3] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
[4] https://lore.kernel.org/bpf/20210604063116.234316-1-memxor@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds a generic layer called bpf_mprog which can be reused by different
attachment layers to enable multi-program attachment and dependency resolution.
In-kernel users of the bpf_mprog don't need to care about the dependency
resolution internals, they can just consume it with few API calls.
The initial idea of having a generic API sparked out of discussion [0] from an
earlier revision of this work where tc's priority was reused and exposed via
BPF uapi as a way to coordinate dependencies among tc BPF programs, similar
as-is for classic tc BPF. The feedback was that priority provides a bad user
experience and is hard to use [1], e.g.:
I cannot help but feel that priority logic copy-paste from old tc, netfilter
and friends is done because "that's how things were done in the past". [...]
Priority gets exposed everywhere in uapi all the way to bpftool when it's
right there for users to understand. And that's the main problem with it.
The user don't want to and don't need to be aware of it, but uapi forces them
to pick the priority. [...] Your cover letter [0] example proves that in
real life different service pick the same priority. They simply don't know
any better. Priority is an unnecessary magic that apps _have_ to pick, so
they just copy-paste and everyone ends up using the same.
The course of the discussion showed more and more the need for a generic,
reusable API where the "same look and feel" can be applied for various other
program types beyond just tc BPF, for example XDP today does not have multi-
program support in kernel, but also there was interest around this API for
improving management of cgroup program types. Such common multi-program
management concept is useful for BPF management daemons or user space BPF
applications coordinating internally about their attachments.
Both from Cilium and Meta side [2], we've collected the following requirements
for a generic attach/detach/query API for multi-progs which has been implemented
as part of this work:
- Support prog-based attach/detach and link API
- Dependency directives (can also be combined):
- BPF_F_{BEFORE,AFTER} with relative_{fd,id} which can be {prog,link,none}
- BPF_F_ID flag as {fd,id} toggle; the rationale for id is so that user
space application does not need CAP_SYS_ADMIN to retrieve foreign fds
via bpf_*_get_fd_by_id()
- BPF_F_LINK flag as {prog,link} toggle
- If relative_{fd,id} is none, then BPF_F_BEFORE will just prepend, and
BPF_F_AFTER will just append for attaching
- Enforced only at attach time
- BPF_F_REPLACE with replace_bpf_fd which can be prog, links have their
own infra for replacing their internal prog
- If no flags are set, then it's default append behavior for attaching
- Internal revision counter and optionally being able to pass expected_revision
- User space application can query current state with revision, and pass it
along for attachment to assert current state before doing updates
- Query also gets extension for link_ids array and link_attach_flags:
- prog_ids are always filled with program IDs
- link_ids are filled with link IDs when link was used, otherwise 0
- {prog,link}_attach_flags for holding {prog,link}-specific flags
- Must be easy to integrate/reuse for in-kernel users
The uapi-side changes needed for supporting bpf_mprog are rather minimal,
consisting of the additions of the attachment flags, revision counter, and
expanding existing union with relative_{fd,id} member.
The bpf_mprog framework consists of an bpf_mprog_entry object which holds
an array of bpf_mprog_fp (fast-path structure). The bpf_mprog_cp (control-path
structure) is part of bpf_mprog_bundle. Both have been separated, so that
fast-path gets efficient packing of bpf_prog pointers for maximum cache
efficiency. Also, array has been chosen instead of linked list or other
structures to remove unnecessary indirections for a fast point-to-entry in
tc for BPF.
The bpf_mprog_entry comes as a pair via bpf_mprog_bundle so that in case of
updates the peer bpf_mprog_entry is populated and then just swapped which
avoids additional allocations that could otherwise fail, for example, in
detach case. bpf_mprog_{fp,cp} arrays are currently static, but they could
be converted to dynamic allocation if necessary at a point in future.
Locking is deferred to the in-kernel user of bpf_mprog, for example, in case
of tcx which uses this API in the next patch, it piggybacks on rtnl.
An extensive test suite for checking all aspects of this API for prog-based
attach/detach and link API comes as BPF selftests in this series.
Thanks also to Andrii Nakryiko for early API discussions wrt Meta's BPF prog
management.
[0] https://lore.kernel.org/bpf/20221004231143.19190-1-daniel@iogearbox.net
[1] https://lore.kernel.org/bpf/CAADnVQ+gEY3FjCR=+DmjDR4gp5bOYZUFJQXj4agKFHT9CQPZBw@mail.gmail.com
[2] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230719140858.13224-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the first basic multi-buffer test that sends a stream of 9K
packets and validates that they are received at the other end. In
order to enable sending and receiving multi-buffer packets, code that
sets the MTU is introduced as well as modifications to the XDP
programs so that they signal that they are multi-buffer enabled.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-20-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the ability to send and receive packets that are larger than the
size of a umem frame, using the AF_XDP /XDP multi-buffer
support. There are three pieces of code that need to be changed to
achieve this: the Rx path, the Tx path, and the validation logic.
Both the Rx path and Tx could only deal with a single fragment per
packet. The Tx path is extended with a new function called
pkt_nb_frags() that can be used to retrieve the number of fragments a
packet will consume. We then create these many fragments in a loop and
fill the N-1 first ones to the max size limit to use the buffer space
efficiently, and the Nth one with whatever data that is left. This
goes on until we have filled in at the most BATCH_SIZE worth of
descriptors and fragments. If we detect that the next packet would
lead to BATCH_SIZE number of fragments sent being exceeded, we do not
send this packet and finish the batch. This packet is instead sent in
the next iteration of BATCH_SIZE fragments.
For Rx, we loop over all fragments we receive as usual, but for every
descriptor that we receive we call a new validation function called
is_frag_valid() to validate the consistency of this fragment. The code
then checks if the packet continues in the next frame. If so, it loops
over the next packet and performs the same validation. once we have
received the last fragment of the packet we also call the function
is_pkt_valid() to validate the packet as a whole. If we get to the end
of the batch and we are not at the end of the current packet, we back
out the partial packet and end the loop. Once we get into the receive
loop next time, we start over from the beginning of that packet. This
so the code becomes simpler at the cost of some performance.
The validation function is_frag_valid() checks that the sequence and
packet numbers are correct at the start and end of each fragment.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-19-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce new netlink attribute NETDEV_A_DEV_XDP_ZC_MAX_SEGS that will
carry maximum fragments that underlying ZC driver is able to handle on
TX side. It is going to be included in netlink response only when driver
supports ZC. Any value higher than 1 implies multi-buffer ZC support on
underlying device.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-11-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmSwqwoACgkQ6rmadz2v
bTqOHRAAn+fzTLqUqsveFQcxOkie5MPHxKoOTjG4+yFR7rzPkU6Mn5RX3w5yFzSn
RqutwykF9OgipAzC3QXv4pRJuq6Gia5nvwUSDP4CX273ljyeF54DK7HfopE1+YrK
HXyBWZvVvMZP6q7qQyQ3qtbHZSjs5XP/M6YBlJ5zo/BTLFCyvbSDP14YKEqcBkWG
ld72ElXFxlnr/zEfRjzBCfMlbmgeHLO0SiHS/9827zEmNP1AAH5/ETA7/rJ7yCJs
QNQUIoJWob8xm5FMJ6CU/+sOqXR1CY053meGJFFBX5pvVD/CLRhrwHn0IMCyQqmh
wKR5waeXhpl/CKNeFuxXVMNFiXbqBb/0LYJaJtrMysjMLTsQ9X7NkrDBa/+kYGyZ
+ghGlaMQvPqUGg0rLH2nl9JNB8Ne/8prLMsAKUWnPuOo+Q03j054gnqhGeNtDd5b
gpSk+7x93PlhGcegBV1Wk8dkiGC5V9nTVNxg40XQUCs4k9L/8Vjc35Tjqx7nBTNH
DiFD24DDKUZacw9L6nEqvLF/N2fiRjtUZnVPC0yn/annyBcfX1s+ZH2Tu1F6Qk38
QMfBCnt12exmsiDoxdzzGJtjHnS/k5fsaKjlR21mOyMrIH7ipltr5UHHrdr1hBP6
24uSeTImvQQKDi+9IuXN127jZDOupKqVS6csrA0ZXrlKWh2HR+U=
=GVUB
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-13
We've added 67 non-merge commits during the last 15 day(s) which contain
a total of 106 files changed, 4444 insertions(+), 619 deletions(-).
The main changes are:
1) Fix bpftool build in presence of stale vmlinux.h,
from Alexander Lobakin.
2) Introduce bpf_me_mcache_free_rcu() and fix OOM under stress,
from Alexei Starovoitov.
3) Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling,
from Andrii Nakryiko.
4) Introduce bpf map element count, from Anton Protopopov.
5) Check skb ownership against full socket, from Kui-Feng Lee.
6) Support for up to 12 arguments in BPF trampoline, from Menglong Dong.
7) Export rcu_request_urgent_qs_task, from Paul E. McKenney.
8) Fix BTF walking of unions, from Yafang Shao.
9) Extend link_info for kprobe_multi and perf_event links,
from Yafang Shao.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (67 commits)
selftests/bpf: Add selftest for PTR_UNTRUSTED
bpf: Fix an error in verifying a field in a union
selftests/bpf: Add selftests for nested_trust
bpf: Fix an error around PTR_UNTRUSTED
selftests/bpf: add testcase for TRACING with 6+ arguments
bpf, x86: allow function arguments up to 12 for TRACING
bpf, x86: save/restore regs with BPF_DW size
bpftool: Use "fallthrough;" keyword instead of comments
bpf: Add object leak check.
bpf: Convert bpf_cpumask to bpf_mem_cache_free_rcu.
bpf: Introduce bpf_mem_free_rcu() similar to kfree_rcu().
selftests/bpf: Improve test coverage of bpf_mem_alloc.
rcu: Export rcu_request_urgent_qs_task()
bpf: Allow reuse from waiting_for_gp_ttrace list.
bpf: Add a hint to allocated objects.
bpf: Change bpf_mem_cache draining process.
bpf: Further refactor alloc_bulk().
bpf: Factor out inc/dec of active flag into helpers.
bpf: Refactor alloc_bulk().
bpf: Let free_all() return the number of freed elements.
...
====================
Link: https://lore.kernel.org/r/20230714020910.80794-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By introducing support for ->fill_link_info to the perf_event link, users
gain the ability to inspect it using `bpftool link show`. While the current
approach involves accessing this information via `bpftool perf show`,
consolidating link information for all link types in one place offers
greater convenience. Additionally, this patch extends support to the
generic perf event, which is not currently accommodated by
`bpftool perf show`. While only the perf type and config are exposed to
userspace, other attributes such as sample_period and sample_freq are
ignored. It's important to note that if kptr_restrict is not permitted, the
probed address will not be exposed, maintaining security measures.
A new enum bpf_perf_event_type is introduced to help the user understand
which struct is relevant.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-9-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the addition of support for fill_link_info to the kprobe_multi link,
users will gain the ability to inspect it conveniently using the
`bpftool link show`. This enhancement provides valuable information to the
user, including the count of probed functions and their respective
addresses. It's important to note that if the kptr_restrict setting is not
permitted, the probed address will not be exposed, ensuring security.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To pick the changes from:
6ac3928156 ("fs: allow to mount beneath top mount")
That, after a fix to the move_mount_flags.sh script, harvests the new
MOVE_MOUNT_BENEATH move_mount flag:
$ tools/perf/trace/beauty/move_mount_flags.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/move_mount_flags.sh > after
$
$ diff -u before after
--- before 2023-07-11 12:38:49.244886707 -0300
+++ after 2023-07-11 12:51:15.125255940 -0300
@@ -6,4 +6,5 @@
[ilog2(0x00000020) + 1] = "T_AUTOMOUNTS",
[ilog2(0x00000040) + 1] = "T_EMPTY_PATH",
[ilog2(0x00000100) + 1] = "SET_GROUP",
+ [ilog2(0x00000200) + 1] = "BENEATH",
};
$
That will then be properly decoded when used in tools like:
# perf trace -e move_mount
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Christian Brauner <brauner@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZK17kifP%2FiYl+Hcc@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
89d01306e3 ("RISC-V: KVM: Implement device interface for AIA irqchip")
22725266bd ("KVM: Fix comment for KVM_ENABLE_CAP")
2f440b72e8 ("KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Binbin Wu <binbin.wu@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Ricardo Koller <ricarkol@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/lkml/ZK12+virXMIXMysy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
96b2b072ee ("exportfs: allow exporting non-decodeable file handles to userspace")
That don't add anything that is handled by existing hard coded tables or
table generation scripts.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZK11P5AwRBUxxutI@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
81b1b599df ("drm/i915: Allow user to set cache at BO creation")
98d2722a85 ("drm/i915/huc: differentiate the 2 steps of the MTL HuC auth flow")
bc4be0a38b ("drm/i915/pmu: Prepare for multi-tile non-engine counters")
d1da138f24 ("drm/i915/uapi/pxp: Add a GET_PARAM for PXP")
That adds some ioctls but use the __I915_PMU_OTHER() macro, not
supported yet in the tools/perf/trace/beauty/drm_ioctl.sh conversion
script.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/lkml/ZK1R%2FIyWcUKYQbQV@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync
and are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type
checking, forcing the use of pointers
-----BEGIN PGP SIGNATURE-----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=S/he
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
o Add stackprotector support.
o Fix RISC-V load-store instruction syntax to support 32-bit
binaries, plus fixes for generic 32-bit support.
o Fix use of s390 sys_fork().
o Add my_syscall6() for ARM.
o Support different platforms having different errno definitions.
o Fix ppoll/ppoll_time64 arguments (add the fifth argument).
o Force use of little endian on MIPS.
o Improved testing, for example, better handling of different
compilers and compiler versions, comparing nolibc behavior
to that of libc, and additional test cases.
o Improve syntax and header ordering.
o Use existing <linux/reboot.h> instead of redefining constants.
o Add syscall().
-----BEGIN PGP SIGNATURE-----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=Is+H
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Add stackprotector support
- Fix RISC-V load-store instruction syntax to support 32-bit binaries,
plus fixes for generic 32-bit support
- Fix use of s390 sys_fork()
- Add my_syscall6() for ARM
- Support different platforms having different errno definitions
- Fix ppoll/ppoll_time64 arguments (add the fifth argument)
- Force use of little endian on MIPS
- Improved testing, for example, better handling of different compilers
and compiler versions, comparing nolibc behavior to that of libc, and
additional test cases
- Improve syntax and header ordering
- Use existing <linux/reboot.h> instead of redefining constants
- Add syscall()
* tag 'nolibc.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (53 commits)
selftests/nolibc: make sure gcc always use little endian on MIPS
selftests/nolibc: also count skipped and failed tests in output
selftests/nolibc: add new gettimeofday test cases
selftests/nolibc: remove gettimeofday_bad1/2 completely
selftests/nolibc: support two errnos with EXPECT_SYSER2()
tools/nolibc: open: fix up compile warning for arm
tools/nolibc: arm: add missing my_syscall6
selftests/nolibc: use INT_MAX instead of __INT_MAX__
selftests/nolibc: not include limits.h for nolibc
selftests/nolibc: fix up compile warning with glibc on x86_64
selftests/nolibc: allow specify extra arguments for qemu
selftests/nolibc: remove test gettimeofday_null
tools/nolibc: ensure fast64 integer types have 64 bits
selftests/nolibc: test_fork: fix up duplicated print
tools/nolibc: ppoll/ppoll_time64: add a missing argument
selftests/nolibc: remove the duplicated gettimeofday_bad2
selftests/nolibc: print name instead of number for EOVERFLOW
tools/nolibc: support nanoseconds in stat()
selftests/nolibc: prevent coredumps during test execution
tools/nolibc: add support for prctl()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZJX+ygAKCRDbK58LschI
g0/2AQDHg12smf9mPfK9wOFDNRIIX8r2iufB8LUFQMzCwltN6gEAkAdkAyfbof7P
TMaNUiHABijAFtChxoSI35j3OOSRrwE=
=GJgN
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Source file locations for syscall definitions can change over a period
of time. File paths in comments get stale and are hard to maintain long
term. Also, their usefulness is questionable since it would be easier to
locate a syscall definition using the SYSCALL_DEFINEx() macro.
Remove all source file path comments from the syscall headers. Also,
equalize the uneven line spacing (some of which is introduced due to the
deletions).
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now we specify the minimal version of GCC as 5.1 and Clang/LLVM as 11.0.0
in Documentation/process/changes.rst, __CHAR_BIT__ and __SIZEOF_LONG__ are
usable, it is probably fine to unify the definition of __BITS_PER_LONG as
(__CHAR_BIT__ * __SIZEOF_LONG__) in asm-generic uapi bitsperlong.h.
In order to keep safe and avoid regression, only unify uapi bitsperlong.h
for some archs such as arm64, riscv and loongarch which are using newer
toolchains that have the definitions of __CHAR_BIT__ and __SIZEOF_LONG__.
Suggested-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/all/d3e255e4746de44c9903c4433616d44ffcf18d1b.camel@xry111.site/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arch/a3a4f48a-07d4-4ed9-bc53-5d383428bdd2@app.fastmail.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd.
This thing is direct analog of SO_PEERCRED which allows to get plain PID.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS,
but it contains pidfd instead of plain pid, which allows programmers not
to care about PID reuse problem.
We mask SO_PASSPIDFD feature if CONFIG_UNIX is not builtin because
it depends on a pidfd_prepare() API which is not exported to the kernel
modules.
Idea comes from UAPI kernel group:
https://uapi-group.org/kernel-features/
Big thanks to Christian Brauner and Lennart Poettering for productive
discussions about this.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Tested-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function ‘open’:
nolibc/sysroot/arm/include/sys.h:919:23: warning: ‘mode_t’ {aka ‘short unsigned int’} is promoted to ‘int’ when passed through ‘...’
919 | mode = va_arg(args, mode_t);
| ^
nolibc/sysroot/arm/include/sys.h:919:23: note: (so you should pass ‘int’ not ‘mode_t’ {aka ‘short unsigned int’} to ‘va_arg’)
nolibc/sysroot/arm/include/sys.h:919:23: note: if this code is reached, the program will abort
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is required by the coming removal of the oldselect and newselect
support.
pselect6/pselect6_time64 will be used unconditionally, they have 6
arguments.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-riscv/bf3e07c1-75f5-425b-9124-f3f2b230e63a@app.fastmail.com/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When compile nolibc-test.c with 2.31 glibc, we got such error:
In file included from /usr/riscv64-linux-gnu/include/sys/cdefs.h:452,
from /usr/riscv64-linux-gnu/include/features.h:461,
from /usr/riscv64-linux-gnu/include/bits/libc-header-start.h:33,
from /usr/riscv64-linux-gnu/include/limits.h:26,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/limits.h:194,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/syslimits.h:7,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/limits.h:34,
from /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/nolibc-test.c:6:
/usr/riscv64-linux-gnu/include/bits/wordsize.h:28:3: error: #error "rv32i-based targets are not supported"
28 | # error "rv32i-based targets are not supported"
Glibc (>= 2.33) commit 5b6113d62efa ("RISC-V: Support the 32-bit ABI
implementation") fixed up above error.
As suggested by Thomas, defining INT_MIN/INT_MAX for nolibc can remove
the including of limits.h, and therefore no above error. of course, the
other libcs still require limits.h, move it to the right place.
The LONG_MIN/LONG_MAX are also defined too.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/09d60dc2-e298-4c22-8e2f-8375861bd9be@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On 32bit platforms size_t is not enough to represent [u]int_fast64_t.
Fixes: 3e9fd4e9a1 ("tools/nolibc: add integer types and integer limit macros")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ppoll and ppoll_time64 syscalls have 5 arguments, but we only
provide 4, align with kernel and add the missing sigsetsize argument.
Because the sigmask is NULL, the last sigsetsize argument is ignored,
keep it as 0 here is safe enough.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Keep backwards compatibility through unions.
The compatibility macros like
#define st_atime st_atim.tv_sec
as documented in stat(3type) don't work for nolibc because it would
break with other stat-like structures that contain the field st_atime.
The stx_atime, stx_mtime, stx_ctime are in type of 'struct
statx_timestamp', which is incompatible with 'struct timespec', should
be converted explicitly.
/* include/uapi/linux/stat.h */
struct statx_timestamp {
__s64 tv_sec;
__u32 tv_nsec;
__s32 __reserved;
};
/* include/uapi/linux/time.h */
struct timespec {
__kernel_old_time_t tv_sec; /* seconds */
long tv_nsec; /* nanoseconds */
};
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/3a3edd48-1ace-4c89-89e8-9c594dd1b3c9@t-8ch.de/
Co-authored-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
[wt: squashed Zhangjin & Thomas' patches into one to preserve "bisectability"]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It will be used to disable core dumps from the child spawned to validate
the stack protector functionality.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
s390 does not support the "global" stack protector mode that is
implemented in nolibc.
Now that nolibc detects if stack protectors are enabled at runtime it
could happen that a future compiler does indeed use global mode on
and nolibc would compile but segfault at runtime.
To avoid this hypothetic case and to align s390 with the other
architectures disable stack protectors when compiling _start().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Not all compilers, notably GCC < 10, have support for
__attribute__((no_stack_protector)).
Fall back to a mechanism that also works there.
Tested with GCC 9.5.0 from kernel.org crosstools.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The stackprotector support in nolibc should be enabled iff it is also
enabled in the compiler.
Use the preprocessor defines added by gcc and clang if stackprotector
support is enable to automatically do so in nolibc.
This completely removes the need for any user-visible API.
To avoid inlining the lengthy preprocessor check into every user
introduce a new header compiler.h that abstracts the logic away.
As the define NOLIBC_STACKPROTECTOR is now not user-relevant anymore
prefix it with an underscore.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230520133237.GA27501@1wt.eu/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This makes it easier to add and remove more entries in the future
without creating spurious diff hunks.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The all-zero pattern is one of the more probable out-of-bound writes so
add a special case to not accidentally accept it.
Also it enables the reliable detection of stack protector initialization
during testing.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This was forgotten in the original submission.
It is unknown why it worked for x86_64 on some compiler without this
attribute.
Reported-by: Willy Tarreau <w@1wt.eu>
Closes: https://lore.kernel.org/lkml/20230520133237.GA27501@1wt.eu/
Fixes: 0d8c461adb ("tools/nolibc: x86_64: add stackprotector support")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
syscall() is used by "normal" libcs to allow users to directly call
syscalls.
By having the same syntax inside nolibc users can more easily write code
that works with different libcs.
The macro logic is adapted from systemtaps STAP_PROBEV() macro that is
released in the public domain / CC0.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When compile nolibc application for rv32, we got such errors:
nolibc/sysroot/riscv/include/arch.h:190: Error: unrecognized opcode `ld a4,0(a3)'
nolibc/sysroot/riscv/include/arch.h:194: Error: unrecognized opcode `sd a3,%lo(_auxv)(a4)'
nolibc/sysroot/riscv/include/arch.h:196: Error: unrecognized opcode `sd a2,%lo(environ)(a3)'
Refer to arch/riscv/include/asm/asm.h and add REG_L/REG_S macros here to let
rv32 uses its own lw/sw instructions.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The same constants and some more have been exposed to userspace via
linux/reboot.h for a long time.
To avoid conflicts and trim down nolibc a bit drop the custom
definitions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On s390 the first two arguments to the clone() syscall are swapped,
as documented in clone(2).
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Most of nolibc is already using C89 comments.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When building in strict C89 mode the "inline" keyword is unknown.
While "__inline__" is non-standard it is used by the kernel headers
themselves.
So the used compilers would have to support it or the users shim it with
a #define.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Most of the code was migrated to C99-conformant __asm__ statements
before. It seems string.h was missed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When we added fd based file streams we created references to STx_FILENO in
stdio.h but these constants are declared in unistd.h which is the last file
included by the top level nolibc.h meaning those constants are not defined
when we try to build stdio.h. This causes programs using nolibc.h to fail
to build.
Reorder the headers to avoid this issue.
Fixes: d449546c957f ("tools/nolibc: implement fd-based FILE streams")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This enables the usage of the stream APIs with arbitrary filedescriptors.
It will be used by a future testcase.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is useful for users and will also be used by a future testcase.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZIDxUwAKCRDbK58LschI
g5hDAQD7ukrniCvMRNIm2yUZIGSxE4RvGiXptO4a0NfLck5R/wEAsfN2KUsPcPhW
HS37lVfx7VVXfj42+REf7lWLu4TXpwk=
=6mS/
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-07
We've added 7 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 112 insertions(+), 7 deletions(-).
The main changes are:
1) Fix a use-after-free in BPF's task local storage, from KP Singh.
2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa.
3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet.
4) UAPI fix for BPF_NETFILTER before final kernel ships,
from Florian Westphal.
5) Fix map-in-map array_map_gen_lookup code generation where elem_size was
not being set for inner maps, from Rhys Rustad-Elliott.
6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add extra path pointer check to d_path helper
selftests/bpf: Fix sockopt_sk selftest
bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
selftests/bpf: Add access_inner_map selftest
bpf: Fix elem_size not being set for inner maps
bpf: Fix UAF in task local storage
bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready()
====================
Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko writes:
And we currently don't have an attach type for NETLINK BPF link.
Thankfully it's not too late to add it. I see that link_create() in
kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't
have done that. Instead we need to add BPF_NETLINK attach type to enum
bpf_attach_type. And wire all that properly throughout the kernel and
libbpf itself.
This adds BPF_NETFILTER and uses it. This breaks uabi but this
wasn't in any non-rc release yet, so it should be fine.
v2: check link_attack prog type in link_create too
Fixes: 84601d6ee6 ("bpf: add bpf_link support for BPF_NETFILTER programs")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzZ69YgrQW7DHCJUT_X+GqMq_ZQQPBwopaJJVGFD5=d5Vg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230605131445.32016-1-fw@strlen.de
Add ability to specify routing table ID to the `bpf_fib_lookup` BPF
helper.
A new field `tbid` is added to `struct bpf_fib_lookup` used as
parameters to the `bpf_fib_lookup` BPF helper.
When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and
`BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup`
will be used as the table ID for the fib lookup.
If the `tbid` does not exist the fib lookup will fail with
`BPF_FIB_LKUP_RET_NOT_FWDED`.
The `tbid` field becomes a union over the vlan related output fields
in `struct bpf_fib_lookup` and will be zeroed immediately after usage.
This functionality is useful in containerized environments.
For instance, if a CNI wants to dictate the next-hop for traffic leaving
a container it can create a container-specific routing table and perform
a fib lookup against this table in a "host-net-namespace-side" TC program.
This functionality also allows `ip rule` like functionality at the TC
layer, allowing an eBPF program to pick a routing table based on some
aspect of the sk_buff.
As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN
datapath.
When egress traffic leaves a Pod an eBPF program attached by Cilium will
determine which VRF the egress traffic should target, and then perform a
FIB lookup in a specific table representing this VRF's FIB.
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZHEm+wAKCRDbK58LschI
gyIKAQCqO7B4sIu8hYVxBTwfHV2tIuXSMSCV4P9e78NUOPcO2QEAvLP/WVSjB0Bm
vpyTKKM22SpZvPe/jSp52j6t20N+qAc=
=HFxD
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-26
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).
The main changes are:
1) Add the capability to destroy sockets in BPF through a new kfunc,
from Aditi Ghag.
2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
from Andrii Nakryiko.
3) Add capability for libbpf to resize datasec maps when backed via mmap,
from JP Kobryn.
4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
from Jiri Olsa.
5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
from Magnus Karlsson.
6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
via bpftool, from Yafang Shao.
7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
from Yonghong Song.
8) Extend bpftool to specify netdevice for resolving XDP hints,
from Larysa Zaremba.
9) Document masking in shift operations for the insn set document,
from Dave Thaler.
10) Extend BPF selftests to check xdp_feature support for bond driver,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
bpf: Fix bad unlock balance on freeze_mutex
libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
libbpf: Ensure libbpf always opens files with O_CLOEXEC
selftests/bpf: Check whether to run selftest
libbpf: Change var type in datasec resize func
bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
libbpf: Selftests for resizing datasec maps
libbpf: Add capability for resizing datasec maps
selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
libbpf: Start v1.3 development cycle
bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
bpftool: Specify XDP Hints ifname when loading program
selftests/bpf: Add xdp_feature selftest for bond device
selftests/bpf: Test bpf_sock_destroy
selftests/bpf: Add helper to get port using getsockname
bpf: Add bpf_sock_destroy kfunc
bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
bpf: udp: Implement batching for sockets iterator
...
====================
Link: https://lore.kernel.org/r/20230526222747.17775-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Picking the changes from:
3632679d9e ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol")
That includes a define (IP_PROTOCOL) that isn't being used in generating
any id -> string table used by 'perf trace'.
Addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/lkml/ZHD/Ms0DMq7viaq+@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copy the kernel version of the header to fix the header diff build
warning. Some new definitions were only added to the tools side header,
but these are only used in Perf so move them to a different header.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20230522102604.1081416-1-james.clark@arm.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: acme@kernel.org
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: siyanteng@loongson.cn
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current UAPI of BPF_OBJ_PIN and BPF_OBJ_GET commands of bpf() syscall
forces users to specify pinning location as a string-based absolute or
relative (to current working directory) path. This has various
implications related to security (e.g., symlink-based attacks), forces
BPF FS to be exposed in the file system, which can cause races with
other applications.
One of the feedbacks we got from folks working with containers heavily
was that inability to use purely FD-based location specification was an
unfortunate limitation and hindrance for BPF_OBJ_PIN and BPF_OBJ_GET
commands. This patch closes this oversight, adding path_fd field to
BPF_OBJ_PIN and BPF_OBJ_GET UAPI, following conventions established by
*at() syscalls for dirfd + pathname combinations.
This now allows interesting possibilities like working with detached BPF
FS mount (e.g., to perform multiple pinnings without running a risk of
someone interfering with them), and generally making pinning/getting
more secure and not prone to any races and/or security attacks.
This is demonstrated by a selftest added in subsequent patch that takes
advantage of new mount APIs (fsopen, fsconfig, fsmount) to demonstrate
creating detached BPF FS mount, pinning, and then getting BPF map out of
it, all while never exposing this private instance of BPF FS to outside
worlds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
This is to get the changes from:
68674f94ff ("x86: don't use REP_GOOD or ERMS for small memory copies")
20f3337d35 ("x86: don't use REP_GOOD or ERMS for small memory clearing")
This also make the 'perf bench mem' files stop referring to the erms
versions that gone away with the above patches.
That addresses these perf tools build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ddc65971bb ("prctl: add PR_GET_AUXV to copy auxv to userspace")
To pick the changes in:
That don't result in any changes in tooling:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
$
This actually adds a new prctl arg, but it has to be dealt with
differently, as it is not in sequence with the other arguments.
Just silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
e65733b5c5 ("KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL")
30ec7997d1 ("KVM: arm64: timers: Allow userspace to set the global counter offset")
821d935c87 ("KVM: arm64: Introduce support for userspace SMCCC filtering")
81dc9504a7 ("KVM: arm64: nv: timers: Support hyp timer emulation")
a8308b3fc9 ("KVM: arm64: Refactor hvc filtering to support different actions")
0e5c9a9d65 ("KVM: arm64: Expose SMC/HVC width to userspace")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/ac5adb58411d23b3360d436a65038fefe91c32a8.1683712945.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
102882b5c6 ("ALSA: document that struct __snd_pcm_mmap_control64 is messed up")
9f656705c5 ("ALSA: pcm: rewrite snd_pcm_playback_silence()")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/5606e7989bbb029c400117f2e455ab995208266f.1683712945.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
31088f6f79 ("uapi/linux/const.h: prefer ISO-friendly __typeof__")
Silencing these perf build warnings::
Warning: Kernel ABI header at 'tools/include/uapi/linux/const.h' differs from latest version at 'include/uapi/linux/const.h'
diff -u tools/include/uapi/linux/const.h include/uapi/linux/const.h
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/33e963df304394f932d9108a1b0bb327f23a4eca.1683712945.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
1cc064dce4 ("drm/i915/perf: Add support for OA media units")
c61d04c9eb ("drm/i915/perf: Add engine class instance parameters to perf")
02abecdeeb ("drm/i915/uapi: Replace fake flex-array with flexible-array member")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/4c0c150997ae1455f49094222daa121385643ae0.1683712945.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
6068771673 ("drm: document DRM_IOCTL_PRIME_HANDLE_TO_FD and PRIME_FD_TO_HANDLE")
61a55f8b1e ("drm: document expectations for GETFB2 handles")
158350aae1 ("drm: document DRM_IOCTL_GEM_CLOSE")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
No changes in tooling as these are just C comment documentation changes.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/7552c61660bf079f2979fdcbcef8e921255f877a.1683712945.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
91d0b78c51 ("inet: Add IP_LOCAL_PORT_RANGE socket option")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/23aabc69956ac94fbf388b05c8be08a64e8c7ccc.1683712945.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZFbCXwAKCRCyPKLppCJ+
J7cHAP97erKY4hBXArjpfzcvpFmboh/oqhbTLntyIpS6TEnOyQEAyervAPGIjQYC
DCo4foyXmOWn3dhNtK9M+YiRl3o2SgQ=
=7G78
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Third version of perf tool updates, with the build problems with with
using a 'vmlinux.h' generated from the main build fixed, and the bpf
skeleton build disabled by default.
Build:
- Require libtraceevent to build, one can disable it using
NO_LIBTRACEEVENT=1.
It is required for tools like 'perf sched', 'perf kvm', 'perf
trace', etc.
libtraceevent is available in most distros so installing
'libtraceevent-devel' should be a one-time event to continue
building perf as usual.
Using NO_LIBTRACEEVENT=1 produces tooling that is functional and
sufficient for lots of users not interested in those libtraceevent
dependent features.
- Allow Python support in 'perf script' when libtraceevent isn't
linked, as not all features requires it, for instance Intel PT does
not use tracepoints.
- Error if the python interpreter needed for jevents to work isn't
available and NO_JEVENTS=1 isn't set, preventing a build without
support for JSON vendor events, which is a rare but possible
condition. The two check error messages:
$(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.)
$(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.)
- Make libbpf 1.0 the minimum required when building with out of
tree, distro provided libbpf.
- Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++
demangler, add 'perf test' entry for it.
- Make binutils libraries opt in, as distros disable building with it
due to licensing, they were used for C++ demangling, for instance.
- Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or
equivalent) isn't installed, we'll just have a build warning:
Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev
- Add a feature test for scandirat(), that is not implemented so far
in musl and uclibc, disabling features that need it, such as
scanning for tracepoints in /sys/kernel/tracing/events.
perf BPF filters:
- New feature where BPF can be used to filter samples, for instance:
$ sudo ./perf record -e cycles --filter 'period > 1000' true
$ sudo ./perf script
perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms])
perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms])
perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms])
true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms])
true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
- In addition to 'period' (PERF_SAMPLE_PERIOD), the other
PERF_SAMPLE_ can be used for filtering, and also some other sample
accessible values, from tools/perf/Documentation/perf-record.txt:
Essentially the BPF filter expression is:
<term> <operator> <value> (("," | "||") <term> <operator> <value>)*
The <term> can be one of:
ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr,
code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat,
p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock,
mem_dtlb, mem_blk, mem_hops
The <operator> can be one of:
==, !=, >, >=, <, <=, &
The <value> can be one of:
<number> (for any term)
na, load, store, pfetch, exec (for mem_op)
l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl)
na, none, hit, miss, hitm, fwd, peer (for mem_snoop)
remote (for mem_remote)
na, locked (for mem_locked)
na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb)
na, by_data, by_addr (for mem_blk)
hops0, hops1, hops2, hops3 (for mem_hops)
perf lock contention:
- Show lock type with address.
- Track and show mmap_lock, siglock and per-cpu rq_lock with address.
This is done for mmap_lock by following the current->mm pointer:
$ sudo ./perf lock con -abl -- sleep 10
contended total wait max wait avg wait address symbol
...
16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640
17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0
3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock
3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58
1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70
9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock
14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0
3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock
16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560
11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock
1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8
1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock
581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058
5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070
112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120
381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock
255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80
- Update default map size to 16384.
- Allocate single letter option -M for --map-nr-entries, as it is
proving being frequently used.
- Fix struct rq lock access for older kernels with BPF's CO-RE
(Compile once, run everywhere).
- Fix problems found with MSAn.
perf report/top:
- Add inline information when using --call-graph=fp or lbr, as was
already done to the --call-graph=dwarf callchain mode.
- Improve the 'srcfile' sort key performance by really using an
optimization introduced in 6.2 for the 'srcline' sort key that
avoids calling addr2line for comparision with each sample.
perf sched:
- Make 'perf sched latency/map/replay' to use "sched:sched_waking"
instead of "sched:sched_waking", consistent with 'perf record'
since d566a9c2d4 ("perf sched: Prefer sched_waking event when it
exists").
perf ftrace:
- Make system wide the default target for latency subcommand, run the
following command then generate some network traffic and press
control+C:
# perf ftrace latency -T __kfree_skb
^C
DURATION | COUNT | GRAPH |
0 - 1 us | 27 | ############# |
1 - 2 us | 22 | ########### |
2 - 4 us | 8 | #### |
4 - 8 us | 5 | ## |
8 - 16 us | 24 | ############ |
16 - 32 us | 2 | # |
32 - 64 us | 1 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
#
perf top:
- Add --branch-history (LBR: Last Branch Record) option, just like
already available for 'perf record'.
- Fix segfault in thread__comm_len() where thread->comm was being
used outside thread->comm_lock.
perf annotate:
- Allow configuring objdump and addr2line in ~/.perfconfig., so that
you can use alternative binaries, such as llvm's.
perf kvm:
- Add TUI mode for 'perf kvm stat report'.
Reference counting:
- Add reference count checking infrastructure to check for use after
free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs,
more to come.
To build with it use -DREFCNT_CHECKING=1 in the make command line
to build tools/perf. Documented at:
https://perf.wiki.kernel.org/index.php/Reference_Count_Checking
- The above caught, for instance, fix, present in this series:
- Fix maps use after put in 'perf test "Share thread maps"':
'maps' is copied from leader, but the leader is put on line 79
and then 'maps' is used to read the reference count below - so
a use after put, with the put of maps happening within
thread__put.
Fixed by reversing the order of puts so that the leader is put
last.
- Also several fixes were made to places where reference counts were
not being held.
- Make this one of the tests in 'make -C tools/perf build-test' to
regularly build test it and to make sure no direct access to the
reference counted structs are made, doing that via accessors to
check the validity of the struct pointer.
ARM64:
- Fix 'perf report' segfault when filtering coresight traces by
sparse lists of CPUs.
- Add support for 'simd' as a sort field for 'perf report', to show
ARM's NEON SIMD's predicate flags: "partial" and "empty".
arm64 vendor events:
- Add N1 metrics.
Intel vendor events:
- Add graniterapids, grandridge and sierraforrest events.
- Refresh events for: alderlake, aldernaken, broadwell, broadwellde,
broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex,
jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids,
silvermont, skylake, tigerlake and westmereep-dp
- Refresh metrics for alderlake-n, broadwell, broadwellde,
broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and
skylakex.
perf stat:
- Implement --topdown using JSON metrics.
- Add TopdownL1 JSON metric as a default if present, but disable it
for now for some Intel hybrid architectures, a series of patches
addressing this is being reviewed and will be submitted for v6.5.
- Use metrics for --smi-cost.
- Update topdown documentation.
Vendor events (JSON) infrastructure:
- Add support for computing and printing metric threshold values. For
instance, here is one found in thesapphirerapids json file:
{
"BriefDescription": "Percentage of cycles spent in System Management Interrupts.",
"MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)",
"MetricGroup": "smi",
"MetricName": "smi_cycles",
"MetricThreshold": "smi_cycles > 0.1",
"ScaleUnit": "100%"
},
- Test parsing metric thresholds with the fake PMU in 'perf test
pmu-events'.
- Support for printing metric thresholds in 'perf list'.
- Add --metric-no-threshold option to 'perf stat'.
- Add rand (reverse and) and has_pmem (optane memory) support to
metrics.
- Sort list of input files to avoid depending on the order from
readdir() helping in obtaining reproducible builds.
S/390:
- Add common metrics: - CPI (cycles per instruction), prbstate (ratio
of instructions executed in problem state compared to total number
of instructions), l1mp (Level one instruction and data cache misses
per 100 instructions).
- Add cache metrics for z13, z14, z15 and z16.
- Add metric for TLB and cache.
ARM:
- Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE
(Memory Tagging Extension) and MOPS (Memory Operations) load/store.
Intel PT hardware tracing:
- Add event type names UINTR (User interrupt delivered) and UIRET
(Exiting from user interrupt routine), documented in table 32-50
"CFE Packet Type and Vector Fields Details" in the Intel Processor
Trace chapter of The Intel SDM Volume 3 version 078.
- Add support for new branch instructions ERETS and ERETU.
- Fix CYC timestamps after standalone CBR
ARM CoreSight hardware tracing:
- Allow user to override timestamp and contextid settings.
- Fix segfault in dso lookup.
- Fix timeless decode mode detection.
- Add separate decode paths for timeless and per-thread modes.
auxtrace:
- Fix address filter entire kernel size.
Miscellaneous:
- Fix use-after-free and unaligned bugs in the PLT handling routines.
- Use zfree() to reduce chances of use after free.
- Add missing 0x prefix for addresses printed in hexadecimal in 'perf
probe'.
- Suppress massive unsupported target platform errors in the unwind
code.
- Fix return incorrect build_id size in elf_read_build_id().
- Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 .
- Add missing new parameter in kfree_skb tracepoint to the python
scripts using it.
- Add 'perf bench syscall fork' benchmark.
- Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in
'perf mem'.
- Fix wrong size expectation for perf test 'Setup struct
perf_event_attr' caused by the patch adding
perf_event_attr::config3.
- Fix some spelling mistakes"
* tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits)
Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"
Revert "perf build: Warn for BPF skeletons if endian mismatches"
perf metrics: Fix SEGV with --for-each-cgroup
perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE
perf stat: Separate bperf from bpf_profiler
perf test record+probe_libc_inet_pton: Fix call chain match on x86_64
perf test record+probe_libc_inet_pton: Fix call chain match on s390
perf tracepoint: Fix memory leak in is_valid_tracepoint()
perf cs-etm: Add fix for coresight trace for any range of CPUs
perf build: Fix unescaped # in perf build-test
perf unwind: Suppress massive unsupported target platform errors
perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it
perf script: Print raw ip instead of binary offset for callchain
perf symbols: Fix return incorrect build_id size in elf_read_build_id()
perf list: Modify the warning message about scandirat(3)
perf list: Fix memory leaks in print_tracepoint_events()
perf lock contention: Rework offset calculation with BPF CO-RE
perf lock contention: Fix struct rq lock access
perf stat: Disable TopdownL1 on hybrid
perf stat: Avoid SEGV on counter->name
...
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
reduction in interrupt rate in virtio
perf improvement for VDUSE
scalability for vhost-scsi
non power of 2 ring support for packed rings
better management for mlx5 vdpa
suspend for snet
VIRTIO_F_NOTIFICATION_DATA
shared backend with vdpa-sim-blk
user VA support in vdpa-sim
better struct packing for virtio
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRG+QcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMyAIALpq8Z9ljl7ADGLuvt/xeCnIdifo7NXam71s
+algalRplF3QplnMxZ0vH19Z8Gvyl18fkk/l0tHoCrZZgyseYR6DbyZXPv8YIfFh
NSBokhil+ZURH6eNJc2PLcBUF3QIL3rSv7tBq7/++PN3KIqdHIePbyUFLlwqb272
NLkOkHT30QBtncRWJORj/GqDxi/4H1zHDmfMd6xD/1B6IrC3gin205RnLuCa2H65
bP0IE025VrmrRqNGX7nhi7dIFo6SmMPwG5O0YWeEhFHaSOL9PJM/Z9EN4tLhC1v1
Y34fryH9e+MMSgBnCK2ExxTq/pGWsbhPbvisDfDf3M1m1HHfhYI=
=N1SV
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vhost,vdpa: features, fixes, and cleanups:
- reduction in interrupt rate in virtio
- perf improvement for VDUSE
- scalability for vhost-scsi
- non power of 2 ring support for packed rings
- better management for mlx5 vdpa
- suspend for snet
- VIRTIO_F_NOTIFICATION_DATA
- shared backend with vdpa-sim-blk
- user VA support in vdpa-sim
- better struct packing for virtio
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits)
vhost_vdpa: fix unmap process in no-batch mode
MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS
tools/virtio: fix build caused by virtio_ring changes
virtio_ring: add a struct device forward declaration
vdpa_sim_blk: support shared backend
vdpa_sim: move buffer allocation in the devices
vdpa/snet: use likely/unlikely macros in hot functions
vdpa/snet: implement kick_vq_with_data callback
virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support
virtio: add VIRTIO_F_NOTIFICATION_DATA feature support
vdpa/snet: support the suspend vDPA callback
vdpa/snet: support getting and setting VQ state
MAINTAINERS: add vringh.h to Virtio Core and Net Drivers
vringh: address kdoc warnings
vdpa: address kdoc warnings
virtio_ring: don't update event idx on get_buf
vdpa_sim: add support for user VA
vdpa_sim: replace the spinlock with a mutex to protect the state
vdpa_sim: use kthread worker
vdpa_sim: make devices agnostic for work management
...
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=Bhta
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.4
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
