The irqchip-renesas-rzg2l driver is used on RZ/G3S SoC. RZ/G3S can go into
deep sleep states where power to different SoC's parts is cut off and RAM
is switched to self-refresh. The resume from these states is done with the
help of the bootloader.
The IA55 IRQ controller needs to be reconfigured when resuming from deep
sleep state. For this the IA55 registers are cached in suspend and restored
in resume.
The IA55 IRQ controller is connected to GPIO controller and GIC as follows:
┌──────────┐ ┌──────────┐
│ │ SPIX │ │
│ ├─────────►│ │
│ │ │ │
│ │ │ │
┌────────┐IRQ0-7 │ IA55 │ │ GIC │
Pin0 ───────►│ ├─────────────►│ │ │ │
│ │ │ │ PPIY │ │
... │ GPIO │ │ ├─────────►│ │
│ │GPIOINT0-127 │ │ │ │
PinN ───────►│ ├─────────────►│ │ │ │
└────────┘ └──────────┘ └──────────┘
where:
- Pin0 is the first GPIO controller pin
- PinN is the last GPIO controller pin
- SPIX is the SPI interrupt with identifier X
- PPIY is the PPI interrupt with identifier Y
Implement suspend/resume functionality with syscore_ops to be able to
cache/restore the registers after/before the GPIO controller suspend/resume
functions are invoked.
As the syscore_ops suspend/resume functions do not take any argument make
the driver private data static so it can be accessed from the
suspend/resume functions.
The IA55 interrupt controller is resumed before the GPIO controller. As
GPIO pins could be in an a state which causes spurious interrupts, the
reconfiguration of the interrupt controller is restricted to restore the
interrupt type and leave them disabled.
An eventually required interrupt enable operation will be done as part of
the GPIO controller resume function after restoring the GPIO state.
[ tglx: Massaged changelog ]
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-8-claudiu.beznea.uj@bp.renesas.com
There are 2 TITSR registers available on the IA55 interrupt controller.
Add a macro that retrieves the TITSR register offset based on it's
index. This macro is useful in when adding suspend/resume support so both
TITSR registers can be accessed in a for loop.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-7-claudiu.beznea.uj@bp.renesas.com
The RZ/G2L manual (chapter "IRQ Status Control Register (ISCR)") describes
the operation to clear interrupts through the ISCR register as follows:
[Write operation]
When "Falling-edge detection", "Rising-edge detection" or
"Falling/Rising-edge detection" is set in IITSR:
- In case ISTAT is 1
0: IRQn interrupt detection status is cleared.
1: Invalid to write.
- In case ISTAT is 0
Invalid to write.
When "Low-level detection" is set in IITSR.:
Invalid to write.
Take the interrupt type into account when clearing interrupts through the
ISCR register to avoid writing the ISCR when the interrupt type is level.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-6-claudiu.beznea.uj@bp.renesas.com
Document structure members to follow the requirements specified in
maintainer-tip, section 4.3.7. Struct declarations and initializers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-5-claudiu.beznea.uj@bp.renesas.com
Align struct member names to tabs to follow the requirements from
maintainer-tip file. 3 tabs were used at the moment as the next commits
will add a new member which requires 3 tabs for a better view.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-4-claudiu.beznea.uj@bp.renesas.com
Use tabs instead of spaces in definition of TINT_EXTRACT_HWIRQ()
and TINT_EXTRACT_GPIOINT() macros to align with coding style
requirements described in Documentation/process/coding-style.rst,
"Indentation" chapter.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-3-claudiu.beznea.uj@bp.renesas.com
Core:
- Exclude managed interrupts in the calculation of interrupts which are
targeted to a CPU which is about to be offlined to ensure that there
are enough free vectors on the still online CPUs to migrate them over.
Managed interrupts do not need to be accounted because they are
either shut down on offline or migrated to an already reserved and
guaranteed slot on a still online CPU in the interrupts affinity
mask.
Including managed interrupts is overaccounting and can result in
needlessly aborting hibernation on large server machines.
- The usual set of small improvements
Drivers:
- Make the generic interrupt chip implementation handle interrupt
domains correctly and initialize the name pointers correctly
- Add interrupt affinity setting support to the Renesas RZG2L chip
driver.
- Prevent registering syscore operations multiple times in the SiFive
PLIC chip driver.
- Update device tree handling in the NXP Layerscape MSI chip driver
-----BEGIN PGP SIGNATURE-----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=Ok6p
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Exclude managed interrupts in the calculation of interrupts which
are targeted to a CPU which is about to be offlined to ensure that
there are enough free vectors on the still online CPUs to migrate
them over.
Managed interrupts do not need to be accounted because they are
either shut down on offline or migrated to an already reserved and
guaranteed slot on a still online CPU in the interrupts affinity
mask.
Including managed interrupts is overaccounting and can result in
needlessly aborting hibernation on large server machines.
- The usual set of small improvements
Drivers:
- Make the generic interrupt chip implementation handle interrupt
domains correctly and initialize the name pointers correctly
- Add interrupt affinity setting support to the Renesas RZG2L chip
driver.
- Prevent registering syscore operations multiple times in the SiFive
PLIC chip driver.
- Update device tree handling in the NXP Layerscape MSI chip driver"
* tag 'irq-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Fix syscore registration for multi-socket systems
irqchip/ls-scfg-msi: Use device_get_match_data()
genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware
genirq/matrix: Exclude managed interrupts in irq_matrix_allocated()
PCI/MSI: Provide stubs for IMS functions
irqchip/renesas-rzg2l: Enhance driver to support interrupt affinity setting
genirq/generic-chip: Fix the irq_chip name for /proc/interrupts
irqdomain: Annotate struct irq_domain with __counted_by
The logic to clear the TINT interrupt source in rzg2l_irqc_irq_disable()
is wrong as the mask is correct only for LSB on the TSSR register.
This issue is found when testing with two TINT interrupt sources. So fix
the logic for all TINTs by using the macro TSSEL_SHIFT() to multiply
tssr_offset with 8.
Fixes: 3fed09559c ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230918122411.237635-2-biju.das.jz@bp.renesas.com
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Add a driver for the Renesas RZ/G2L Interrupt Controller.
This supports external pins being used as interrupts. It supports
one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
to be used as IRQ lines.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220707182314.66610-4-prabhakar.mahadev-lad.rj@bp.renesas.com
