PARPORT_EPP_FAST flag currently uses 32-bit I/O port access for data
read/write (insl/outsl).
Add PARPORT_EPP_FAST_16 and PARPORT_EPP_FAST_8 that use insw/outsw
and insb/outsb (and PARPORT_EPP_FAST_32 as alias for PARPORT_EPP_FAST).
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Decrease the number of PCI BAR pair slots allocated for port subdrivers
from 4 to 2 as none wants more than 2 at this time, reducing the memory
footprint a little. No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20230108215656.6433-7-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No Oxford Semiconductor PCI or PCIe parallel port device supports the
Parallel Port FIFO mode. All support the PS/2 Parallel Port mode and
the Enhanced Parallel Port mode via the ECR register. The original 5V
PCI OX16PCI954 device does not support the Extended Capabilities Port
mode, the Test mode or the Configuration mode, but all the other OxSemi
devices do, including in particular the 3.3V PCI OXmPCI954 device and
the universal voltage PCI OXuPCI954 device. All the unsupported modes
are marked reserved in the relevant datasheets.
Accordingly enable the `base_hi' BAR for the 954 devices to enable PS2
and EPP mode support via the ECR register, however mask the COMPAT mode
and, until we have a way to determine what chip variant it is that we
poke at, also the ECP mode, and mask the COMPAT mode only for all the
remaining OxSemi devices, fixing errors like:
parport0: FIFO is stuck
FIFO write timed out
and a non-functional port when the Parallel Port FIFO mode is selected.
Complementing the fix apply an ECR mask for all these devices, which are
documented to only permit writing to the mode field of the ECR register
with a bit pattern of 00001 required to be written to bits 4:0 on mode
field writes. No nFault or service interrupts are implemented, which
will therefore never have to be enabled, though bit 2 does report the
FIFO threshold status to be polled for in the ECP mode where supported.
We have a documented case of writing 1 to bit 2 causing a lock-up with
at least one OX12PCI840 device (from old drivers/parport/ChangeLog):
2001-10-10 Tim Waugh <twaugh@redhat.com>
* parport_pc.c: Support for OX12PCI840 PCI card (reported by
mk@daveg.com). Lock-ups diagnosed by Ronnie Arosa (and now we
just don't trust its ECR).
which commit adbd321a17 ("parport_pc: add base_hi BAR for oxsemi_840")
must have broken and by applying an ECR mask here we prevent the lock-up
from triggering. This could have been the reason for requiring 00001 to
be written to bits 4:0 of ECR.
Update the inline comment accordingly; it has come from Linux 2.4.12
back in 2001 and predates the introduction of OXmPCI954 and OXuPCI954
devices that do support ECP.
References:
[1] "OX16PCI954 Integrated Quad UART and PCI interface", Oxford
Semiconductor Ltd., Data Sheet Revision 1.3, Feb. 1999, Chapter 9
"Bidirectional Parallel Port", pp. 53-55
[2] "OX16PCI952 Data Sheet, Integrated High Performance Dual UARTs,
Parallel Port and 5.0v PCI interface", Oxford Semiconductor Ltd.,
DS_B008A_00, Datasheet rev 1.1, June 2001, Chapter 8 "Bi-directional
Parallel Port", pp. 52-56
[3] "OXmPCI954 DATA SHEET Integrated High Performance Quad UARTs, 8-bit
Local Bus/Parallel Port. 3.3v PCI/miniPCI interface.", Oxford
Semiconductor Ltd., DS-0019, June 2005, Chapter 10 "Bidirectional
Parallel Port", pp. 86-90
[4] "OXmPCI952 Data Sheet, Integrated High Performance Dual UARTs, 8-bit
Local Bus/Parallel Port. 3.3v PCI/miniPCI interface.", Oxford
Semiconductor Ltd., DS-0020, June 2005, Chapter 8 "Bidirectional
Parallel Port", pp. 73-77
[5] "OX12PCI840 Integrated Parallel Port and PCI interface", Oxford
Semiconductor Ltd., DS-0021, Jun 2005, Chapter 5 "Bi-directional
Parallel Port", pp. 18-21
[6] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port",
Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Chapter "Parallel
Port Function", pp. 59-62
[7] "OXPCIe840 PCI Express Bridge to Parallel Port", Oxford
Semiconductor, Inc., DS-0049, Mar 06 08, Chapter "Parallel Port
Function", pp. 15-18
[8] "OXuPCI954 Data Sheet, Integrated High Performance Quad UARTs, 8-bit
Local Bus/Parallel Port, 3.3 V and 5 V (Universal Voltage) PCI
Interface.", Oxford Semiconductor, Inc., DS-0058, 26 Jan 2009,
Chapter 8 "Bidirectional Parallel Port", pp. 62-65
[9] "OXuPCI952 Data Sheet, Integrated High Performance Dual UARTs, 8-bit
Local Bus/Parallel Port, 3.3 V and 5.0 V Universal Voltage PCI
Interface.", Oxford Semiconductor, Inc., DS-0059, Sep 2007, Chapter
8 "Bidirectional Parallel Port", pp. 61-64
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20230108215656.6433-6-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a bitmask field specifying writable ECR bits for PCI devices and
apply it via `__parport_pc_probe_port'.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20230108215656.6433-5-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a mode mask field for PCI devices and use `__parport_pc_probe_port'
in place of `parport_pc_probe_port' to apply it.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20230108215656.6433-4-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide an `ecr_writable' parameter to `__parport_pc_probe_port' so that
callers can specify a mask of bits to modify on ECR writes.
To avoid the need for separate bit set and bit clear masks always set
bit 0 whenever a non-zero mask has been set, as all the currently known
cases where a mask is required, that is Oxford Semiconductor devices, do
require this bit to be set. If further cases are discovered where the
bit is required to be clear, we can update code accordingly, but chances
are very low as the bit is supposed to be read-only[1].
Skip ECR probing, which can be problematic as the Oxford Semiconductor
OX12PCI840 part has been reported to lock up on setting bit 2, whenever
a non-zero mask has been requested by a port subdriver, assuming that
the ECR must be there if the subdriver has requested a specific way to
access it.
References:
[1] "Extended Capabilities Port Protocol and ISA Interface Standard",
Microsoft Corporation, Revision: 1.14, July 14, 1993, Table 14
"Extended Control Register"
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20230108215656.6433-3-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename `parport_pc_probe_port' to `__parport_pc_probe_port' and add a
`mode_mask' parameter so that callers can specify a mask of unsupported
modes to exclude even if mode probing seems to indicate otherwise. Add
a `parport_pc_probe_port' wrapper with an implicit mask of 0 for the
current callers to use.
No functional change at this point, but the configuration of data write
handlers is now no longer intertwined with determination and reporting
of available modes.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20230108215656.6433-2-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Complement commit 991214386d ("parport: remove unused dead code from
lowlevel drivers") and remove a stale piece of commented-out code that
refers to a function removed with said commit.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20230108215656.6433-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Match the data type of a temporary holding a reference to the FIFO port
with the type of the original reference coming from `struct parport',
avoiding data truncation with LP64 ports such as SPARC64 that refer to
PCI port I/O locations via their corresponding MMIO addresses and will
therefore have non-zero bits in the high 32-bit part of the reference.
And in any case it is cleaner to have the data types matching here.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/linux-pci/20220419033752.GA1101844@bhelgaas/
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209231912550.29493@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Netmos parallel port 9901 was already supported but the device 9900 was
not. This patch adds the required settings for it and was successfully
tested with the Netmos device 9900.
Signed-off-by: Alexander Baehr <abaehr@osadl.org>
Link: https://lore.kernel.org/r/20220806113334.264598686@osadl.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Standardize the define and the uses of printmode.
Miscellanea:
o Add missing statement termination ; where necessary
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20200403134325.11523-8-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a more common logging style.
Miscellanea:
o One message converted from KERN_INFO to KERN_DEBUG
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20200403134325.11523-7-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the logging can be poorly formatted because of unexpected
line breaks given printks without KERN_CONT that should be pr_cont.
Miscellanea:
o Remove unnecessary spaces between function name and open parenthesis
o Convert bare printks to pr_<level> where appropriate
o Convert embedded function names to use %s, __func__
o Coalesce formats
o Realign arguments
o Use do {} while (0) in a macro and not a bare if
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20200403134325.11523-3-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the more common kernel style.
Miscellanea:
o Coalesce formats
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20200403134325.11523-2-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the original code before 181bf1e815 the loop was continuing until
it finds the first matching superios[i].io and p->base.
But after 181bf1e815 the logic changed and the loop now returns the
pointer to the first mismatched array element which is then used in
get_superio_dma() and get_superio_irq() and thus returning the wrong
value.
Fix the condition so that it now returns the correct pointer.
Fixes: 181bf1e815 ("parport_pc: clean up the modified while loops using for")
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: QiaoChong <qiaochong@loongson.cn>
[rewrite the commit message]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114730 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382
but serial ports are not soldered on board. Detected as
Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])
Signed-off-by: Alexander Gerasiov <gq@redlab-i.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel adds newline automatically between printk calls, we must use
pr_cont if we want multiple printk strings on the same line.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.
To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.
Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.
This patch annotates drivers in drivers/parport/.
Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix typos and add the following to the scripts/spelling.txt:
overwrien||overwritten
Link: http://lkml.kernel.org/r/1481573103-11329-30-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
parport subsystem starts using the device-model. Drivers using the
device-model has to define devmodel as true and should register the
device with parport using parport_register_dev_model().
Tested-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big char/misc driver update for 3.19-rc1
Lots of little things all over the place in different drivers, and a new
subsystem, "coresight" has been added. Full details are in the
shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSODosACgkQMUfUDdst+ykSNwCfcqx1Z3rQzbLwSrR2sa1fV3Zb
yEAAniJoLZ4ZkoQK4/1ozsFc31q+gXNm
=/epr
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver update for 3.19-rc1
Lots of little things all over the place in different drivers, and a
new subsystem, "coresight" has been added. Full details are in the
shortlog"
* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
parport: parport_pc, do not remove parent devices early
spmi: Remove shutdown/suspend/resume kernel-doc
carma-fpga-program: drop videobuf dependency
carma-fpga: drop videobuf dependency
carma-fpga-program.c: fix compile errors
i8k: Fix temperature bug handling in i8k_get_temp()
cxl: Name interrupts in /proc/interrupt
CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
coresight-replicator: remove .owner field for driver
coresight: fixed comments in coresight.h
coresight: fix typo in comment in coresight-priv.h
coresight: bindings for coresight drivers
coresight: Adding ABI documentation
w1: support auto-load of w1_bq27000 module.
w1: avoid potential u16 overflow
cn: verify msg->len before making callback
mei: export fw status registers through sysfs
mei: read and print all six FW status registers
mei: txe: add cherrytrail device id
mei: kill cached host and me csr values
...
When the parport_pc module is removed from the system, all parport
devices are iterated in parport_pc_exit and removed by a call to
parport_pc_unregister_port. Note that some parport devices have its
'struct device' parent, known as port->dev. And when port->dev is a
platform device, it is destroyed in parport_pc_exit too.
Now, when parport_pc_unregister_port is called for a going port,
drv->detach(port) is called for every parport driver in the system.
ppdev can be one of them. ppdev's detach() tears down its per-port
sysfs directory, which established port->dev as a parent earlier.
But since parport_pc_exit kills port->dev parents before unregisters
ports proper, ppdev's sysfs directory has no living parent anymore.
This results in the following warning:
WARNING: CPU: 1 PID: 785 at fs/sysfs/group.c:219 sysfs_remove_group+0x9b/0xa0
sysfs group ffffffff81c69e20 not found for kobject 'parport1'
Modules linked in: parport_pc(E-) ppdev(E) [last unloaded: ppdev]
CPU: 1 PID: 785 Comm: rmmod Tainted: G W E 3.18.0-rc5-next-20141120+ #824
...
Call Trace:
...
[<ffffffff810aff76>] warn_slowpath_fmt+0x46/0x50
[<ffffffff8123d81b>] sysfs_remove_group+0x9b/0xa0
[<ffffffff814c27e7>] dpm_sysfs_remove+0x57/0x60
[<ffffffff814b6ac9>] device_del+0x49/0x240
[<ffffffff814b6ce2>] device_unregister+0x22/0x70
[<ffffffff814b6dac>] device_destroy+0x3c/0x50
[<ffffffffc012209a>] pp_detach+0x4a/0x60 [ppdev]
[<ffffffff814b32dd>] parport_remove_port+0x11d/0x150
[<ffffffffc0137328>] parport_pc_unregister_port+0x28/0xf0 [parport_pc]
[<ffffffffc0138c0e>] parport_pc_exit+0x76/0x468 [parport_pc]
[<ffffffff81128dbc>] SyS_delete_module+0x18c/0x230
It is also easily reproducible on qemu with two dummy ports '-parallel
/dev/null -parallel /dev/null'.
So switch the order of killing the two structures. But since port is
freed by parport_pc_unregister_port, we have to remember port->dev
in a local variable.
Perhaps nothing worse than the warning happens thanks to the device
refcounting. We *should* be on the safe side.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Martin Pluskal <mpluskal@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We definitely know that only x86 (32-bit) architecture is affected by the issue, so implement a stub instead of the actual check for other architectures.
We also know that motherboard LPT chipset is affected, so the port is either come from
parport_pc_init (when `io' module param is used) or
parport_pc_find_isa_ports (when default LPT ports are probbed: 0x378, 0x278, 0x3bc).
In both cases the port considered as 'legacy' and `dev' member of struct parport is NULL. See also comments for `struct parport' in parport.h
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put the code to check present of the Intel bug from parport_EPP_supported
into new intel_bug_present function. The later also return ECR register
to the state it has before function call.
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 85747f ("PATCH] parport: add NetMOS 9805 support") Max added
the PCI ID for NetMOS 9805 based on a Debian bug report from 2k4 which
was at the v2.4.26 time frame. The patch made into 2.6.14.
Shortly before that patch akpm merged commit 296d3c783b ("[PATCH] Support
NetMOS based PCI cards providing serial and parallel ports") which made
into v2.6.9-rc1.
Now we have two different entries for the same PCI id.
I have here the NetMos 9805 which claims to support SPP/EPP/ECP mode.
This patch takes Max's entry for titan_1284p1 (base != -1 specifies the
ioport for ECP mode) and replaces akpm's entry for netmos_9805 which
specified -1 (=none). Both share the same PCI-ID (my card has subsystem
0x1000 / 0x0020 so it should match PCI_ANY).
While here I also drop the entry for titan_1284p2 which is the same as
netmos_9815.
Cc: Maximilian Attems <maks@stro.at>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 7106b4e3 ("8250: Oxford Semiconductor Devices") the debug
print of the device id does no longer match the real device if it is
located in the "enum" behind oxsemi_pcie_pport. The reason is that the
code assumes that each id contains one entry in the PCI table.
The fix is to lookup the currently used id from the id-> parameter.
Cc: Lee Howard <lee.howard@mainpine.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code sequence:
dev->coherent_dma_mask = DMA_BIT_MASK(24);
dev->dma_mask = &dev->coherent_dma_mask;
bypasses the architectures check on the DMA mask. It can be replaced
with dma_coerce_mask_and_coherent(), avoiding the direct initialization
of this mask.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@ti.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Gianluca Anzolin <gianluca@sottospazio.it>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the driver core, and other driver subsystems, pull request for
the 3.5-rc1 merge window.
Outside of a few minor driver core changes, we ended up with the
following different subsystem and core changes as well, due to
interdependancies on the driver core:
- hyperv driver updates
- drivers/memory being created and some drivers moved into it
- extcon driver subsystem created out of the old Android staging switch
driver code
- dynamic debug updates
- printk rework, and /dev/kmsg changes
All of this has been tested in the linux-next releases for a few weeks
with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk+7q28ACgkQMUfUDdst+ykXmwCfcPASzC+/bDkuqdWsqzxlWZ7+
VOQAnAriySv397St36J6Hz5bMQZwB1Yq
=SQc+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg Kroah-Hartman:
"Here's the driver core, and other driver subsystems, pull request for
the 3.5-rc1 merge window.
Outside of a few minor driver core changes, we ended up with the
following different subsystem and core changes as well, due to
interdependancies on the driver core:
- hyperv driver updates
- drivers/memory being created and some drivers moved into it
- extcon driver subsystem created out of the old Android staging
switch driver code
- dynamic debug updates
- printk rework, and /dev/kmsg changes
All of this has been tested in the linux-next releases for a few weeks
with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.
* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
uio_pdrv_genirq: get irq through platform resource if not set otherwise
memory: tegra{20,30}-mc: Remove empty *_remove()
printk() - isolate KERN_CONT users from ordinary complete lines
sysfs: get rid of some lockdep false positives
Drivers: hv: util: Properly handle version negotiations.
Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
memory: tegra{20,30}-mc: Use dev_err_ratelimited()
driver core: Add dev_*_ratelimited() family
Driver Core: don't oops with unregistered driver in driver_find_device()
printk() - restore prefix/timestamp printing for multi-newline strings
printk: add stub for prepend_timestamp()
ARM: tegra30: Make MC optional in Kconfig
ARM: tegra20: Make MC optional in Kconfig
ARM: tegra30: MC: Remove unnecessary BUG*()
ARM: tegra20: MC: Remove unnecessary BUG*()
printk: correctly align __log_buf
ARM: tegra30: Add Tegra Memory Controller(MC) driver
ARM: tegra20: Add Tegra Memory Controller(MC) driver
printk() - restore timestamp printing at console output
printk() - do not merge continuation lines of different threads
...
This unused code has been untouched for over 7 years and must
go.
Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/parport/parport_pc.c: In function '__check_irq':
drivers/parport/parport_pc.c:3415: warning: return from incompatible pointer type
drivers/parport/parport_pc.c: In function '__check_dma':
drivers/parport/parport_pc.c:3417: warning: return from incompatible pointer type
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sio_ite_8872_probe() bails out if it detects no-parallel (1S, 2S) or
unknown card.
It doesn't call release_region() on the previously allocated resource
though. This causes
(a) leak of the resource
(b) kernel oops when parport module is removed and /proc/ioports is read. This
is because the string that has been associated to the IO port region
is a static char array inside the already removed module.
Let's call release_region() properly before baling out.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Niels de Vos <ndevos@redhat.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Joe Krahn <krahn@niehs.nih.gov>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Timedia/SUNIX PCI cards with both serial and parallel ports are
currently supported by 8250_pci and parport_pc individually. Moving
that support into parport_serial allows using both types of ports at the
same time.
This was successfully tested with a SUNIX 4079T.
Signed-off-by: Frédéric Brière <fbriere@fbriere.net>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-parport@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits)
serial: 8250_pci: add support for Cronyx Omega PCI multiserial board.
tty/serial: Fix break handling for PORT_TEGRA
tty/serial: Add explicit PORT_TEGRA type
n_tracerouter and n_tracesink ldisc additions.
Intel PTI implementaiton of MIPI 1149.7.
Kernel documentation for the PTI feature.
export kernel call get_task_comm().
tty: Remove to support serial for S5P6442
pch_phub: Support new device ML7223
8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
ASoC: Update cx20442 for TTY API change
pch_uart: Support new device ML7223 IOH
parport: Use request_muxed_region for IT87 probe and lock
tty/serial: add support for Xilinx PS UART
n_gsm: Use print_hex_dump_bytes
drivers/tty/moxa.c: Put correct tty value
TTY: tty_io, annotate locking functions
TTY: serial_core, remove superfluous set_task_state
TTY: serial_core, remove invalid test
Char: moxa, fix locking in moxa_write
...
Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and
drivers/tty/serial/Makefile.
I did the hci_ldisc thing as an evil merge, cleaning things up.
This is needed as part of making the various IT87 drivers actually co-exist
politely with each other, and with other superio devices that may be muxed
on 0x2E/0x2F.
It can be applied before or after the other patches by Nat Gurumoorthy without
problem.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace release_resource() by release_region() and also fix the
inconsistency in the size of the requested/released region.
The size of the resource should be 32, not 0x8 like it was corrected in
commit e7c310c36e already.
CC: linux-serial@vger.kernel.org
Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The printk message for the 2 serial port version is obscured with a debug
macro, unlike all other versions of the card. It should be changed to make
the output equal for all detected models.
Reference: https://bugzilla.redhat.com/show_bug.cgi?id=578616#c1
CC: Joe Krahn <krahn@niehs.nih.gov>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch is heavily based on an earlier patch found on the linux-serial
mailing list [1], written by Darius Augulis.
The previous incarnation of this patch only supported a 2x serial port
card. I have added support for my SYBA 6x serial port card, and tested on
x86.
[1]: http://marc.info/?l=linux-serial&m=124975806304760
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
parport_pc_probe_port() creates the own 'parport_pc' device if the
device argument is NULL. Then parport_pc_probe_port() doesn't
initialize the dma_mask and coherent_dma_mask of the device and calls
dma_alloc_coherent with it. dma_alloc_coherent fails because
dma_alloc_coherent() doesn't accept the uninitialized dma_mask:
http://lkml.org/lkml/2009/6/16/150
Long ago, X86_32 and X86_64 had the own dma_alloc_coherent
implementations; X86_32 accepted a device having dma_mask that is not
initialized however X86_64 didn't. When we merged them, we chose to
prohibit a device having dma_mask that is not initialized. I think
that it's good to require drivers to set up dma_mask (and
coherent_dma_mask) properly if the drivers want DMA.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reported-by: Malcom Blaney <malcolm.blaney@maptek.com.au>
Tested-by: Malcom Blaney <malcolm.blaney@maptek.com.au>
Cc: stable@kernel.org
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_PARPORT_PC_SUPERIO probes for various superio chips by writing
byte sequences to a set of different potential I/O ranges. But the
probed ranges are not exclusive to parallel ports. Some of our boards
just happen to have a watchdog in one of them. Took us almost a week
to figure out why some distros reboot without warning after running
flawlessly for 3 hours. For exactly 170 = 0xAA minutes, that is ...
Fixed by restoring original values after probing. Also fixed too small
request_region() in detect_and_report_it87().
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: <stable@kernel.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
