Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
Here is the large set of staging driver updates for 6.4-rc1. Once
again, we removed more code than was added, a nice trend.
It was a calm cycle, mostly all just small coding style cleanups,
included in here are:
- removal of the greybus loopback testing tools, userspace code that
didn't belong in a driver subdirectory and was causing problems for
some build systems
- platform remove callback cleanups
- rtl8192e huge cleanups
- other small staging driver cleanups.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp8GA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynwpQCeLF95LYh09qG+H4uKNLfjkS/AHR0AnAkuaH/4
4q0UhHX+jDeRFaat3qtN
=VHqC
-----END PGP SIGNATURE-----
Merge tag 'staging-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the large set of staging driver updates for 6.4-rc1. Once
again, we removed more code than was added, a nice trend.
It was a calm cycle, mostly all just small coding style cleanups,
included in here are:
- removal of the greybus loopback testing tools, userspace code that
didn't belong in a driver subdirectory and was causing problems for
some build systems
- platform remove callback cleanups
- rtl8192e huge cleanups
- other small staging driver cleanups.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (185 commits)
staging: rtl8192e: Fix W_DISABLE# does not work after stop/start
staging: rtl8192e: Remove unchanged variables bfsync_processing and more
staging: rtl8192e: Remove unchanged variable frame_sync_monitor
staging: rtl8192e: Remove unchanged variable chan_forced
staging: rtl8192e: Remove set to true while true of bfirst_after_down
staging: rtl8192e: Remove second initialization of bActuallySet
staging: rtl8192e: Remove unused macro RT_SET_PS_LEVEL
staging: rtl8192e: Remove unused function rtl92e_disable_nic
staging: rtl8192e: Remove unchanged variable RegRfPsLevel
staging: rtl8172: Add blank lines after declarations
staging: rtl8192e: Remove unused variable RF_Type
staging: rtl8192e: Remove one of two checks for hardware RTL8192SE
staging: rtl8192e: Remove unused function _rtl92e_dm_init_wa_broadcom_iot
staging: rtl8192e: Remove macro IS_HARDWARE_TYPE_8192SE
staging: greybus: drop loopback test files
staging: rtl8192e: Add blank lines after declarations
staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPDecryptErrors>
staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPReplays>
staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPFormatErrors>
staging: rtl8192e: fix alignment to match open parenthesis
...
The greybus loopback test tool does not belong burried down in a
driver-specific directory. If it is needed, it should be somewhere
else, like in the testing directory. But as the loopback driver is
probably never going to be merged out of the staging directory, let's
just delete the test alltogether for now. If it's needed in the future,
it can be brought back with a revert.
Also, having an Android.mk file in the kernel source tree breaks some
Android build systems when trying to build from a read-only source tree,
the report of which prompted this being a good reason to remove it as
well.
Cc: Johan Hovold <johan@kernel.org>
Cc: Jack Schofield <schofija@oregonstate.edu>
Cc: Vaibhav Nagare <vnagare@redhat.com>
Cc: greybus-dev@lists.linaro.org
Acked-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/2023040613-huntsman-goldsmith-4a41@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230403154014.2564054-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230403154014.2564054-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert 'pwm_chip_to_gb_pwm_chip' from a macro to a static
inline function, to make the relevant types apparent in the
definition and to benefit from the type checking performed by
the compiler at call sites.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Link: https://lore.kernel.org/r/20230326064519.GA179449@sumitra.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert 'gb_audio_manager_module' from a macro to a static
inline function, to make the relevant types apparent in the
definition and to benefit from the type checking performed by
the compiler at call sites.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Link: https://lore.kernel.org/r/7470bf9d9a57e8bf27e55bd5e3791c5e0ee31385.1679732179.git.sumitraartsy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert 'gpio_chip_to_gb_gpio_controller' from a macro to a static
inline function, to make the relevant types apparent in the
definition and to benefit from the type checking performed by
the compiler at call sites.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Link: https://lore.kernel.org/r/3fc5d84a99574ac4a76d26427ac544de375adeb4.1679732179.git.sumitraartsy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Splitting function header to multiple lines because of 80 characters per
line limit, results in ending the function call line with '('.
This leads to CHECK reported by checkpatch.pl
Move the first parameter right after the '(' in the function call line.
Align the rest of the parameters to the opening parenthesis.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Link: https://lore.kernel.org/r/ZBhNOkQbG4ygNF98@khadija-virtual-machine
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The coding style used to limit lines to 80 characters,
which led to splitting of these function headers into multiple
lines and ends the first line with a '('.
Such splits causes checks reported by the checkpatch.
Place the function parameters of each function immediately after
'(' in a single line to align the function headers.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Link: https://lore.kernel.org/r/20230319164520.GA125117@sumitra.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to manually set the owner of a struct class, as the
registering function does it automatically, so remove all of the
explicit settings from various drivers that did so as it is unneeded.
This allows us to remove this pointer entirely from this structure going
forward.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230310173217.3429788-6-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Here is the "boring" staging driver update for 6.3-rc1.
Nothing major in here at all, it's just lots of tiny code cleanups to
bring some of the staging drivers more in line with the real portion of
the kernel (apis and coding style.) Overall we remove more lines of
code than we add, always a nice result.
The big work was done by Martin Kaiser and Philipp Hortmann, both
tackling some of the older wifi drivers, removing unused code and
structures and a file in one case.
Full details of the changes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ir5w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylkcACdE89JfMWxuUQ34E5a4mZRj6HJviYAn3iAA8Fl
q+3rKqPqhCMs5bw1ftjF
=Dpnn
-----END PGP SIGNATURE-----
Merge tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "boring" staging driver update for 6.3-rc1.
Nothing major in here at all, it's just lots of tiny code cleanups to
bring some of the staging drivers more in line with the real portion
of the kernel (apis and coding style.) Overall we remove more lines of
code than we add, always a nice result.
The big work was done by Martin Kaiser and Philipp Hortmann, both
tackling some of the older wifi drivers, removing unused code and
structures and a file in one case.
Full details of the changes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (219 commits)
staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr"
staging: r8188eu: replace hand coded loop with list_for_each_entry
staging: r8188eu: merge _rtw_enqueue_cmd into its caller
most: add maintainer entry
staging: rtl8192e: Use BIT() instead of << for bit field MSR_LINK_MASK
staging: rtl8192e: Rename DM_RxPathSelTable
staging: rtl8192e: Rename diff_TH and disabledRF
staging: rtl8192e: Rename Enable, cck_Rx_path and SS_TH_low
staging: rtl8192e: Rename RateAdaptiveTH.., VeryLowRSSI and WAIotTHVal
staging: rtl8192e: Rename RxPathSelectio.., RateAdaptive.. and RateAdap..
staging: rtl8192e: Rename OFDM_Table.., CCK_Table_.. and RxPathSelecti..
staging: rtl8192e: Rename MacBlkCtrl and remove double definition
staging: rtl8192e: Remove blank lines in r8192E_hw.h, rtl_core.h and ..
staging: rtl8192e: Rename AcmHw_ViqEn, AcmHw_VoqEn and ANAPAR_FOR_8192PciE
staging: r8188eu: bagg_pkt parameter is not used
staging: r8188eu: simplify rtw_get_ff_hwaddr
staging: r8188eu: simplify xmit_buf flags
staging: r8188eu: xmit_buf's ff_hwaddr is not used
staging: r8188eu: remove unused frametag defines
staging: r8188eu: simplify rtw_alloc_xmitframe
...
Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A
SEAnnokGCDtA/BNIXeES
=luRi
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
- constify hid_ll_driver (Thomas Weißschuh)
- map standard Battery System Charging to upower (José Expósito)
- couple of assorted fixes and new handling of HID usages (Jingyuan
Liang & Ronald Tschalär)
Since commit 52d2253469 ("HID: Make lowlevel driver structs const")
the lowlevel HID drivers are only exposed as const.
Take advantage of this to constify the underlying structure, too.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230130-hid-const-ll-driver-v1-9-3fc282b3b1d0@weissschuh.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert various parameter names for ->dtr_rts() and related functions
from onoff, on, and raise to active.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230117090358.4796-12-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the raise/on parameter in ->dtr_rts() to bool through the
callchain. The parameter is used like bool. In USB serial, there
remains a few implicit bool -> larger type conversions because some
devices use u8 in their control messages.
In moxa_tiocmget(), dtr variable was reused for line status which
requires int so use a separate variable for status.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230117090358.4796-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the macro irq_data_to_gpio_chip with a static inline function to comply
with Linux coding style standards.
Signed-off-by: Brent Pappas <bpappas@pappasbrent.com>
Link: https://lore.kernel.org/r/20230117152857.22141-1-bpappas@pappasbrent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20221212221315.3778788-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the large set of staging driver changes for 6.1-rc1.
Nothing really interesting in here at all except we deleted a driver
(fwserial) as no one had been using it for a long time. Other than
that, just the normal cleanups and minor fixes:
- rtl8723bs driver cleanups
- loads of r8188eu driver cleanups, making the driver smaller and
fixing up some firmware dependency issues.
- vt6655 driver cleanups.
- lots of other small staging driver cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GPBg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynd8gCeJS+vq6paXc/p8nMfz82Q87pn3SAAoKtCLeKa
k9ZtNB9ci3ws0E2mZFal
=3CGs
-----END PGP SIGNATURE-----
Merge tag 'staging-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the large set of staging driver changes for 6.1-rc1.
Nothing really interesting in here at all except we deleted a driver
(fwserial) as no one had been using it for a long time. Other than
that, just the normal cleanups and minor fixes:
- rtl8723bs driver cleanups
- loads of r8188eu driver cleanups, making the driver smaller and
fixing up some firmware dependency issues.
- vt6655 driver cleanups.
- lots of other small staging driver cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (266 commits)
staging: rtl8192e: Rename variable Bandwidth to avoid CamelCase
staging: r8188eu: remove PHY_RFConfig8188E()
staging: r8188eu: remove PHY_RF6052_Config8188E()
staging: r8188eu: convert ODM_ReadAndConfig_AGC_TAB_1T_8188E() to int
staging: r8188eu: convert ODM_ReadAndConfig_PHY_REG_1T_8188E() to int
staging: r8188eu: convert ODM_ReadAndConfig_RadioA_1T_8188E() to int
staging: r8188eu: convert ODM_ReadAndConfig_MAC_REG_8188E() to int
staging: rtl8192e: cmdpkt: Use skb_put_data() instead of skb_put/memcpy pair
staging: r8188eu: Use skb_put_data() instead of skb_put/memcpy pair
staging: r8188eu: remove hal/odm_RegConfig8188E.c
staging: r8188eu: make odm_ConfigRF_RadioA_8188E() static
staging: r8188eu: make odm_ConfigMAC_8188E() static
staging: r8188eu: don't check for stop/removal in the blink worker
staging: r8188eu: don't check bSurpriseRemoved in SwLedOff
staging: rtl8192e: Remove unused variables ForcedAMSDUMaxSize, ...
staging: rtl8192e: Rename CurrentMPDU..., ForcedAMPDU... and ForcedMPDU...
staging: rtl8192e: Rename SelfMimoPs, CurrentOpMode and bForcedShortGI
staging: rtl8192e: Rename PeerMimoPs, IOTAction and IOTRaFunc
staging: rtl8192e: Rename RxRe...WinSize, RxReorder... and RxReorderDr...
staging: rtl8192e: Rename szRT2RTAggBuffer, bRegRxRe... and bCurRxReo...
...
In the greybus audio_helper code, the debugfs file for the dapm has the
potential to be removed and memory will be leaked. There is also the
very real potential for this code to remove ALL debugfs entries from the
system, and it seems like this is what will really happen if this code
ever runs. This all is very wrong as the greybus audio driver did not
create this debugfs file, the sound core did and controls the lifespan
of it.
So remove all of the debugfs logic from the audio_helper code as there's
no way it could be correct. If this really is needed, it can come back
with a fixup for the incorrect usage of the debugfs_lookup() call which
is what caused this to be noticed at all.
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220902143715.320500-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There should be no reason to adjust old ktermios which is going to get
discarded anyway.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No entry is being removed from the list when iterating the widget list
in gbaudio_dapm_free_controls() so there's no need to use
list_for_each_entry_safe().
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220610075347.18917-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gbaudio_dapm_free_controls() iterates over widgets using
list_for_each_entry_safe(), which leaves the loop cursor pointing to a
meaningless structure if it completes a traversal of the list. The
cursor was set to NULL at the end of the loop body, but would be
overwritten by the final loop cursor update.
Because of this behavior, the widget could be non-null after the loop
even if the widget wasn't found, and the cleanup logic would treat the
pointer as a valid widget to free.
To fix this, introduce a temporary variable to act as the loop cursor
and copy it to a variable that can be accessed after the loop finishes.
This was detected with the help of Coccinelle.
Signed-off-by: Jared Kangas <kangas.jd@gmail.com>
Link: https://lore.kernel.org/r/20220605231806.720085-1-kangas.jd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of staging driver updates for 5.19-rc1.
Lots of forward progress happened this development cycle, one driver
(wfx wireless driver) got merged into the real portion of the kernel,
and another one (unisys) was removed as no one is around anymore to take
care of it and no one has the hardware. Combined with loads of tiny
driver cleanups overall we removed 13k lines of code from the tree, a
nice improvement.
Other than the wfx and unisys driver changes the major points of this
merge is:
- r8188eu driver cleanups. So many cleanups. It's amazing just
how many things have been cleaned up here, and yet, how many
remain to go. Lots of work happened here, and it doesn't look
to slow down any time soon.
- other wifi driver cleanups. Not as many as the r8188eu
driver, but still pretty impressive from a janitorial point of
view.
- bcm2853 driver cleanups
- other very minor driver cleanups
All of these have been in the linux-next tree for weeks with no reported
issues.
Note, you will have a merge conflict in the
drivers/net/wireless/silabs/wfx/sta.c file, please just take the change
that came in from the wifi tree. We thought as I had pulled the same
merge point from the wifi developers this type of conflict wouldn't have
happened, but for some reason git flags it as something to pay attention
to and couldn't resolve it itself.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnfqA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynbFQCfbr7wdJYsNfVd0nXlDUw9EQtbhR8AoM5Y31Ni
hBJs6fa/HMGfLnrmN2Xi
=BQyT
-----END PGP SIGNATURE-----
Merge tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.19-rc1.
Lots of forward progress happened this development cycle, one driver
(wfx wireless driver) got merged into the real portion of the kernel,
and another one (unisys) was removed as no one is around anymore to
take care of it and no one has the hardware. Combined with loads of
tiny driver cleanups overall we removed 13k lines of code from the
tree, a nice improvement.
Other than the wfx and unisys driver changes the major points of this
merge is:
- r8188eu driver cleanups. So many cleanups. It's amazing just how
many things have been cleaned up here, and yet, how many remain to
go. Lots of work happened here, and it doesn't look to slow down
any time soon.
- other wifi driver cleanups. Not as many as the r8188eu driver, but
still pretty impressive from a janitorial point of view.
- bcm2853 driver cleanups
- other very minor driver cleanups
All of these have been in the linux-next tree for weeks with no
reported issues"
* tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (363 commits)
staging: r8188eu: remove include/rtw_debug.h
staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan()
staging: r8188eu: delete rtw_wx_read/write32()
staging: r8188eu: Remove multiple assignments
staging: r8188eu: add check for kzalloc
staging: r8188eu: fix warnings in rtw_wlan_util
staging: r8188eu: fix warnings in rtw_pwrctrl
staging: r8188eu: fix warnings in rtw_p2p
staging: rtl8712: fix uninit-value in r871xu_drv_init()
staging: rtl8712: fix uninit-value in usb_read8() and friends
staging: rtl8712: add error handler in r8712_usbctrl_vendorreq()
staging: r8188eu: remove _drv_ defines from include/rtw_debug.h
staging: vc04_services: remove unused macro
staging: rtl8192u: remove null check after call container_of()
staging: rtl8192e: remove null check after call container_of()
staging: ks7010: remove null check after call container_of()
staging: r8188eu: remove HW_VAR_AC_PARAM_BE from SetHwReg8188EU()
staging: r8188eu: assoc_rsp and assoc_rsp_len are not used
staging: r8188eu: last_rx_mgnt_pkts is set but not used
staging: r8188eu: simplify error handling in recv_func_prehandle
...
snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the optional remove callback for the soc_codec_dev_gbaudio
structure. The only place it is referenced is
snd_soc_component_remove() which is only called if the sound_component
pointer is non-null. The null function pointers here can be optionally
ommitted. When a sound component is registered this way, the remove
callback is optional. We can safely remove the whole gbcodec_remove
function, which used to be an empty function with a void return type.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/12037ae2502ad7d0311bcdf2178c3d2156293236.1649824370.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit f9a8ee8c8b ("pwm: Always allocate PWM chip base ID
dynamically") the value held in base isn't used any more in the PWM
framework. All PMWs get assigned a dynamic ID, so the assignment is
redundant and can be dropped.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220411113010.208500-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list does not exit early then data == NULL and 'module' does not
point to a valid list element.
Using 'module' in such a case is not valid and was therefore removed.
Fixes: 6dd67645f2 ("greybus: audio: Use single codec driver registration")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220321123626.3068639-1-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to limit the scope of the list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220321123712.3068778-1-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of staging driver updates for 5.18-rc1.
Loads of tiny cleanups for almost all staging drivers in here, nothing
major at all. Highlights include:
- remove the ashmem Android driver. It is long-dead and if
there are any legacy userspace applications still using it,
the Android kernel images will maintain it, the community
shouldn't care about it anymore
- wfx wifi driver major cleanups. Should be ready to merge out
of staging soon, and will coordinate with the wifi maintainers
after -rc1 is out
- major cleanups and unwinding of the layers of the r8188eu
driver. It's amazing just how many unneeded layers of
abstraction is in there, just when we think it's done, another
is found...
- lots of tiny coding style cleanups in many other staging
drivers.
There will be merge conflict with a fbtft change and the spi driver
changes in your tree, but it's pretty obvious what to do (the function
shouldn't return anything.)
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG1cA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylndwCfVhxKnbTYKtOs6UEr5pgPCoQCioUAn0Y2i0TG
4aFeeKUyL8VGdAitL+tp
=E6v7
-----END PGP SIGNATURE-----
Merge tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.18-rc1.
Loads of tiny cleanups for almost all staging drivers in here, nothing
major at all. Highlights include:
- remove the ashmem Android driver. It is long-dead and if there are
any legacy userspace applications still using it, the Android
kernel images will maintain it, the community shouldn't care about
it anymore
- wfx wifi driver major cleanups. Should be ready to merge out of
staging soon, and will coordinate with the wifi maintainers after
-rc1 is out
- major cleanups and unwinding of the layers of the r8188eu driver.
It's amazing just how many unneeded layers of abstraction is in
there, just when we think it's done, another is found...
- lots of tiny coding style cleanups in many other staging drivers.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits)
staging: r8188eu: remove unnecessary memset in r8188eu
staging: greybus: introduce pwm_ops::apply
staging: rts5208: Resolve checkpatch.pl issues.
staging: sm750fb: fix naming style
staging: fbtft: Consider type of init sequence values in fbtft_init_display()
staging: fbtft: Constify buf parameter in fbtft_dbg_hex()
staging: mmal-vchiq: clear redundant item named bulk_scratch
mips: dts: ralink: add MT7621 SoC
staging: r8188eu: remove some unused local ieee80211 macros
staging: r8188eu: make rtl8188e_process_phy_info static
staging: r8188eu: remove unused function prototype
staging: r8188eu: remove three unused receive defines
staging: r8188eu: remove unnecessary initializations
staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST"
MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS
staging: r8188eu: proper error handling in rtw_init_drv_sw
staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv
staging: vt6656: Removed unused variable vt3342_vnt_threshold
staging: vt6656: Removed unused variable bb_vga_0
staging: remove ashmem
...
Linus pointed out the benefits of C99 some years ago, especially variable
declarations in loops [1]. At that time, we were not ready for the
migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum compiler
version, there is nothing to prevent us from going to -std=gnu99, or even
straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first.
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
-----BEGIN PGP SIGNATURE-----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=KMDk
-----END PGP SIGNATURE-----
Merge tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild update for C11 language base from Masahiro Yamada:
"Kbuild -std=gnu11 updates for v5.18
Linus pointed out the benefits of C99 some years ago, especially
variable declarations in loops [1]. At that time, we were not ready
for the migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum
compiler version, there is nothing to prevent us from going to
-std=gnu99, or even straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first"
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
* tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
Kbuild: move to -std=gnu11
Kbuild: use -Wdeclaration-after-statement
Kbuild: add -Wno-shift-negative-value where -Wextra is used
Introduce newer .apply function in pwm_ops to replace legacy operations
including enable, disable, config and set_polarity.
This guarantees atomic changes of the pwm controller configuration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Song Chen <chensong_2000@189.cn>
Link: https://lore.kernel.org/r/1647597432-27586-1-git-send-email-chensong_2000@189.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a preparation for moving to -std=gnu11, turn off the
-Wshift-negative-value option. This warning is enabled by gcc when
building with -Wextra for c99 or higher, but not for c89. Since
the kernel already relies on well-defined overflow behavior,
the warning is not helpful and can simply be disabled in
all locations that use -Wextra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Instead of manually disabling interrupts before invoking use
generic_handle_irq_safe() which can be invoked with enabled and disabled
interrupts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20220211181500.1856198-8-bigeasy@linutronix.de
'destroy_workqueue()' already drains the queue before destroying it,
so there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220210060205.1607792-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds