When --for-each-cgroup option is used, it fails when any of events is
not supported and exits immediately. This is not how 'perf stat'
handles unsupported events.
Let's ignore the failure and proceed with others so that the output is
similar to when BPF counters are not used:
Before:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Failed to open first cgroup events
$
After it shows output similat to when --bpf-counters isn't specified:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Performance counter stats for 'system wide':
<not supported> L1-icache-loads system.slice
29,892,418 L1-dcache-loads system.slice
<not supported> L1-icache-loads user.slice
52,497,220 L1-dcache-loads user.slice
$
Fixes: 944138f048 ("perf stat: Enable BPF counter with --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If it mixes core and uncore events, each evsel would have different cpu map.
But it assumed they are same with evlist's all_cpus and accessed by the same
index. This resulted in a crash like below.
$ perf stat -a --bpf-counters --for-each_cgroup ^. -e cycles,imc/cas_count_read/ sleep 1
Segmentation fault
While it's not recommended to use uncore events for cgroup aggregation, it
should not crash.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220916184132.1161506-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous cpu map introduced a bug in the bperf cgroup counter. This
results in a failure when user gives a partial cpu map starting from
non-zero.
$ sudo ./perf stat -C 1-2 --bpf-counters --for-each-cgroup ^. sleep 1
libbpf: prog 'on_cgrp_switch': failed to create BPF link for perf_event FD 0:
-9 (Bad file descriptor)
Failed to attach cgroup program
To get the FD of an evsel, it should use a map index not the CPU number.
Fixes: 0255571a16 ("perf cpumap: Switch to using perf_cpu_map API")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220916184132.1161506-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch some raw accesses to the cpu map to using the library API. This
can help with reference count checking. Some BPF cases switch from index
to CPU for consistency, this shouldn't matter as the CPU map is full.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220503041757.2365696-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211225005558.503935-1-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A common problem is confusing CPU map indices with the CPU, by wrapping
the CPU with a struct then this is avoided. This approach is similar to
atomic_t.
Committer notes:
To make it build with BUILD_BPF_SKEL=1 these files needed the
conversions to 'struct perf_cpu' usage:
tools/perf/util/bpf_counter.c
tools/perf/util/bpf_counter_cgroup.c
tools/perf/util/bpf_ftrace.c
Also perf_env__get_cpu() was removed back in "perf cpumap: Switch
cpu_map__build_map to cpu function".
Additionally these needed to be fixed for the ARM builds to complete:
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/pmu.c
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a part of libbpf 1.0 plan[0], this patch deprecates use of
bpf_map__resize in favour of bpf_map__set_max_entries.
Reference: https://github.com/libbpf/libbpf/issues/304
[0]: https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#libbpfh-high-level-apis
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Muhammad Falak R Wani <falakreyaz@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Link: http //lore.kernel.org/lkml/20210815103610.27887-1-falakreyaz@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move evsel::idx to perf_evsel::idx, so we can move the group interface
to libperf.
Committer notes:
Fixup evsel->idx usage in tools/perf/util/bpf_counter_cgroup.c, that
appeared in my tree in my local tree.
Also fixed up these:
$ find tools/perf/ -name "*.[ch]" | xargs grep 'evsel->idx'
tools/perf/ui/gtk/annotate.c: evsel->idx + i);
tools/perf/ui/gtk/annotate.c: evsel->idx);
$
That running 'make -C tools/perf build-test' caught.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently bperf was added to use BPF to count perf events for various
purposes. This is an extension for the approach and targetting to
cgroup usages.
Unlike the other bperf, it doesn't share the events with other
processes but it'd reduce unnecessary events (and the overhead of
multiplexing) for each monitored cgroup within the perf session.
When --for-each-cgroup is used with --bpf-counters, it will open
cgroup-switches event per cpu internally and attach the new BPF
program to read given perf_events and to aggregate the results for
cgroups. It's only called when task is switched to a task in a
different cgroup.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210701211227.1403788-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim