Commit 9470e4a693 only covered the initial bug report, there are
other spots in CFQ where we need to check that we actually have
a valid cfq_group_data structure.
Fixes: e48453c3 ("block, cgroup: implement policy-specific per-blkcg data")
Signed-off-by: Jens Axboe <axboe@fb.com>
If none of the devices in the system are using CFQ, then attempting to
read:
/sys/fs/cgroup/blkio/blkio.leaf_weight
will results in a NULL dereference. Check for a valid cfq_group_data
struct before attempting to dereference it.
Reported-by: Andrey Wagin <avagin@gmail.com>
Fixes: e48453c3 ("block, cgroup: implement policy-specific per-blkcg data")
Signed-off-by: Jens Axboe <axboe@fb.com>
If CFQ_GROUP_IOSCHED is not set, the compiler produces the
following warning:
CC block/cfq-iosched.o
linux/block/cfq-iosched.c:469:2:
warning: 'cpd_to_cfqgd' defined but not used [-Wunused-function]
*cpd_to_cfqgd(struct blkcg_policy_data *cpd)
^
In reality, two other lookup functions aren't used either if
CFQ_GROUP_IOSCHED isn't set. Move all three under one of the
CFQ_GROUP_IOSCHED sections in the code.
Reported-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A previous commit wanted to make CFQ default to IOPS mode on
non-rotational storage, however it did so when the queue was
initialized and the non-rotational flag is only set later on
in the probe.
Add an elevator hook that gets called off the add_disk() path,
at that point we know that feature probing has finished, and
we can reliably check for the various flags that drivers can
set.
Fixes: 41c0126b ("block: Make CFQ default to IOPS mode on SSDs")
Tested-by: Romain Francoise <romain@orebokech.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The block IO (blkio) controller enables the block layer to provide service
guarantees in a hierarchical fashion. Specifically, service guarantees
are provided by registered request-accounting policies. As of now, a
proportional-share and a throttling policy are available. They are
implemented, respectively, by the CFQ I/O scheduler and the blk-throttle
subsystem. Unfortunately, as for adding new policies, the current
implementation of the block IO controller is only halfway ready to allow
new policies to be plugged in. This commit provides a solution to make
the block IO controller fully ready to handle new policies.
In what follows, we first describe briefly the current state, and then
list the changes made by this commit.
The throttling policy does not need any per-cgroup information to perform
its task. In contrast, the proportional share policy uses, for each cgroup,
both the weight assigned by the user to the cgroup, and a set of dynamically-
computed weights, one for each device.
The first, user-defined weight is stored in the blkcg data structure: the
block IO controller allocates a private blkcg data structure for each
cgroup in the blkio cgroups hierarchy (regardless of which policy is active).
In other words, the block IO controller internally mirrors the blkio cgroups
with private blkcg data structures.
On the other hand, for each cgroup and device, the corresponding dynamically-
computed weight is maintained in the following, different way. For each device,
the block IO controller keeps a private blkcg_gq structure for each cgroup in
blkio. In other words, block IO also keeps one private mirror copy of the blkio
cgroups hierarchy for each device, made of blkcg_gq structures.
Each blkcg_gq structure keeps per-policy information in a generic array of
dynamically-allocated 'dedicated' data structures, one for each registered
policy (so currently the array contains two elements). To be inserted into the
generic array, each dedicated data structure embeds a generic blkg_policy_data
structure. Consider now the array contained in the blkcg_gq structure
corresponding to a given pair of cgroup and device: one of the elements
of the array contains the dedicated data structure for the proportional-share
policy, and this dedicated data structure contains the dynamically-computed
weight for that pair of cgroup and device.
The generic strategy adopted for storing per-policy data in blkcg_gq structures
is already capable of handling new policies, whereas the one adopted with blkcg
structures is not, because per-policy data are hard-coded in the blkcg
structures themselves (currently only data related to the proportional-
share policy).
This commit addresses the above issues through the following changes:
. It generalizes blkcg structures so that per-policy data are stored in the same
way as in blkcg_gq structures.
Specifically, it lets also the blkcg structure store per-policy data in a
generic array of dynamically-allocated dedicated data structures. We will
refer to these data structures as blkcg dedicated data structures, to
distinguish them from the dedicated data structures inserted in the generic
arrays kept by blkcg_gq structures.
To allow blkcg dedicated data structures to be inserted in the generic array
inside a blkcg structure, this commit also introduces a new blkcg_policy_data
structure, which is the equivalent of blkg_policy_data for blkcg dedicated
data structures.
. It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a
cpd_size field and a cpd_init field, to be initialized by the policy with,
respectively, the size of the blkcg dedicated data structures, and the
address of a constructor function for blkcg dedicated data structures.
. It moves the CFQ-specific fields embedded in the blkcg data structure (i.e.,
the fields related to the proportional-share policy), into a new blkcg
dedicated data structure called cfq_group_data.
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
CFQ idling causes reduced IOPS throughput on non-rotational disks.
Since disk head seeking is not applicable to SSDs, it doesn't really
help performance by anticipating future near-by IO requests.
By turning off idling (and switching to IOPS mode), we allow other
processes to dispatch IO requests down to the driver and so increase IO
throughput.
Following FIO benchmark results were taken on a cloud SSD offering with
idling on and off:
Idling iops avg-lat(ms) stddev bw
------------------------------------------------------
On 7054 90.107 38.697 28217KB/s
Off 29255 21.836 11.730 117022KB/s
fio --name=temp --size=100G --time_based --ioengine=libaio \
--randrepeat=0 --direct=1 --invalidate=1 --verify=0 \
--verify_fatal=0 --rw=randread --blocksize=4k --group_reporting=1 \
--filename=/dev/sdb --runtime=10 --iodepth=64 --numjobs=10
And the following is from a local SSD run:
Idling iops avg-lat(ms) stddev bw
------------------------------------------------------
On 19320 33.043 14.068 77281KB/s
Off 21626 29.465 12.662 86507KB/s
fio --name=temp --size=5G --time_based --ioengine=libaio \
--randrepeat=0 --direct=1 --invalidate=1 --verify=0 \
--verify_fatal=0 --rw=randread --blocksize=4k --group_reporting=1 \
--filename=/fio_data --runtime=10 --iodepth=64 --numjobs=10
Reviewed-by: Nauman Rafique <nauman@google.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Storage controllers may expose multiple block devices that share hardware
resources managed by blk-mq. This patch enhances the shared tags so a
low-level driver can access the shared resources not tied to the unshared
h/w contexts. This way the LLD can dynamically add and delete disks and
request queues without having to track all the request_queue hctx's to
iterate outstanding tags.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can safely merge anything that wont generate an SG list entry,
so if the bio is data-less (discard), don't look at potential
SG gaps.
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently dm-multipath has to clone the bios for every request sent
to the lower devices, which wastes cpu cycles and ties down memory.
This patch instead adds a new REQ_CLONE flag that instructs req_bio_endio
to not complete bios attached to a request, which we set on clone
requests similar to bios in a flush sequence. With this change I/O
errors on a path failure only get propagated to dm-multipath, which
can then either resubmit the I/O or complete the bios on the original
request.
I've done some basic testing of this on a Linux target with ALUA support,
and it survives path failures during I/O nicely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for
non-chains") regressed all existing callers that followed this pattern:
1) saving a bio's original bi_end_io
2) wiring up an intermediate bi_end_io
3) restoring the original bi_end_io from intermediate bi_end_io
4) calling bio_endio() to execute the restored original bi_end_io
The regression was due to BIO_CHAIN only ever getting set if
bio_inc_remaining() is called. For the above pattern it isn't set until
step 3 above (step 2 would've needed to establish BIO_CHAIN). As such
the first bio_endio(), in step 2 above, never decremented __bi_remaining
before calling the intermediate bi_end_io -- leaving __bi_remaining with
the value 1 instead of 0. When bio_inc_remaining() occurred during step
3 it brought it to a value of 2. When the second bio_endio() was
called, in step 4 above, it should've called the original bi_end_io but
it didn't because there was an extra reference that wasn't dropped (due
to atomic operations being optimized away since BIO_CHAIN wasn't set
upfront).
Fix this issue by removing the __bi_remaining management complexity for
all callers that use the above pattern -- bio_chain() is the only
interface that _needs_ to be concerned with __bi_remaining. For the
above pattern callers just expect the bi_end_io they set to get called!
Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls
that aren't associated with the bio_chain() interface.
Also, the bio_inc_remaining() interface has been moved local to bio.c.
Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The only possible problem of using mutex_lock() instead of trylock
is about deadlock.
If there aren't any locks held before calling blkdev_reread_part(),
deadlock can't be caused by this conversion.
If there are locks held before calling blkdev_reread_part(),
and if these locks arn't required in open, close handler and I/O
path, deadlock shouldn't be caused too.
Both user space's ioctl(BLKRRPART) and md_setup_drive() from
init/do_mounts_md.c belongs to the 1st case, so the conversion is safe
for the two cases.
For loop, the previous patches in this pathset has fixed the ABBA lock
dependency, so the conversion is OK.
For nbd, tx_lock is held when calling the function:
- both open and release won't hold the lock
- when blkdev_reread_part() is run, I/O thread has been stopped
already, so tx_lock won't be acquired in I/O path at that time.
- so the conversion won't cause deadlock for nbd
For dasd, both dasd_open(), dasd_release() and request function don't
acquire any mutex/semphone, so the conversion should be safe.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch exports blkdev_reread_part() for block drivers, also
introduce __blkdev_reread_part().
For some drivers, such as loop, reread of partitions can be run
from the release path, and bd_mutex may already be held prior to
calling ioctl_by_bdev(bdev, BLKRRPART, 0), so introduce
__blkdev_reread_part for use in such cases.
CC: Christoph Hellwig <hch@lst.de>
CC: Jens Axboe <axboe@kernel.dk>
CC: Tejun Heo <tj@kernel.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
CC: Markus Pargmann <mpa@pengutronix.de>
CC: Stefan Weinhuber <wein@de.ibm.com>
CC: Stefan Haberland <stefan.haberland@de.ibm.com>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
CC: Fabian Frederick <fabf@skynet.be>
CC: Ming Lei <ming.lei@canonical.com>
CC: David Herrmann <dh.herrmann@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: nbd-general@lists.sourceforge.net
CC: linux-s390@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since the big barrier rewrite/removal in 2007 we never fail FLUSH or
FUA requests, which means we can remove the magic BIO_EOPNOTSUPP flag
to help propagating those to the buffer_head layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
lockdep gets unhappy about the not disabling irqs when using the queue_lock
around it. Instead of trying to fix that up just switch to an atomic_t
and get rid of the lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Last patch makes plug work for multiple queue case. However it only
works for single disk case, because it assumes only one request in the
plug list. If a task is accessing multiple disks, eg MD/DM, the
assumption is wrong. Let blk_attempt_plug_merge() record request from
the same queue.
V2: use NULL parameter in !mq case. Fix a bug. Add comments in
blk_attempt_plug_merge to make it less (hopefully) confusion.
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
plug is still helpful for workload with IO merge, but it can be harmful
otherwise especially with multiple hardware queues, as there is
(supposed) no lock contention in this case and plug can introduce
latency. For multiple queues, we do limited plug, eg plug only if there
is request merge. If a request doesn't have merge with following
request, the requet will be dispatched immediately.
V2: check blk_queue_nomerges() as suggested by Jeff.
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If we directly issue a request and it fails, we use
blk_mq_merge_queue_io(). But we already assigned bio to a request in
blk_mq_bio_to_request. blk_mq_merge_queue_io shouldn't run
blk_mq_bio_to_request again.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The following appears in blk_sq_make_request:
/*
* If we have multiple hardware queues, just go directly to
* one of those for sync IO.
*/
We clearly don't have multiple hardware queues, here! This comment was
introduced with this commit 07068d5b8e (blk-mq: split make request
handler for multi and single queue):
We want slightly different behavior from them:
- On single queue devices, we currently use the per-process plug
for deferred IO and for merging.
- On multi queue devices, we don't use the per-process plug, but
we want to go straight to hardware for SYNC IO.
The old code had this:
use_plug = !is_flush_fua && ((q->nr_hw_queues == 1) || !is_sync);
and that was converted to:
use_plug = !is_flush_fua && !is_sync;
which is not equivalent. For the single queue case, that second half of
the && expression is always true. So, what I think was actually inteded
follows (and this more closely matches what is done in blk_queue_bio).
V2: delete the 'likely', which should not be a big deal
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Current code looks like inner plug gets flushed with a
blk_finish_plug(). Actually it's a nop. All requests/callbacks are added
to current->plug, while only outmost plug is assigned to current->plug.
So inner plug always has empty request/callback list, which makes
blk_flush_plug_list() a nop. This tries to make the code more clear.
Signed-off-by: Shaohua Li <shli@fb.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This removes the request types and hacks from the block code and into the
old IDE driver. There is a small amunt of code duplication due to this,
but it's not too bad.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Struct bio has a reference count that controls when it can be freed.
Most uses cases is allocating the bio, which then returns with a
single reference to it, doing IO, and then dropping that single
reference. We can remove this atomic_dec_and_test() in the completion
path, if nobody else is holding a reference to the bio.
If someone does call bio_get() on the bio, then we flag the bio as
now having valid count and that we must properly honor the reference
count when it's being put.
Tested-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Struct bio has an atomic ref count for chained bio's, and we use this
to know when to end IO on the bio. However, most bio's are not chained,
so we don't need to always introduce this atomic operation as part of
ending IO.
Add a helper to elevate the bi_remaining count, and flag the bio as
now actually needing the decrement at end_io time. Rename the field
to __bi_remaining to catch any current users of this doing the
incrementing manually.
For high IOPS workloads, this reduces the overhead of bio_endio()
substantially.
Tested-by: Robert Elliott <elliott@hp.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 889fa31f00 was a bit too eager in reducing the loop count,
so we ended up missing queues in some configurations. Ensure that
our division rounds up, so that's not the case.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 889fa31f00 ("blk-mq: reduce unnecessary software queue looping")
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block layer core bits from Jens Axboe:
"This is the core pull request for 4.1. Not a lot of stuff in here for
this round, mostly little fixes or optimizations. This pull request
contains:
- An optimization that speeds up queue runs on blk-mq, especially for
the case where there's a large difference between nr_cpu_ids and
the actual mapped software queues on a hardware queue. From Chong
Yuan.
- Honor node local allocations for requests on legacy devices. From
David Rientjes.
- Cleanup of blk_mq_rq_to_pdu() from me.
- exit_aio() fixup from me, greatly speeding up exiting multiple IO
contexts off exit_group(). For my particular test case, fio exit
took ~6 seconds. A typical case of both exposing RCU grace periods
to user space, and serializing exit of them.
- Make blk_mq_queue_enter() honor the gfp mask passed in, so we only
wait if __GFP_WAIT is set. From Keith Busch.
- blk-mq exports and two added helpers from Mike Snitzer, which will
be used by the dm-mq code.
- Cleanups of blk-mq queue init from Wei Fang and Xiaoguang Wang"
* 'for-4.1/core' of git://git.kernel.dk/linux-block:
blk-mq: reduce unnecessary software queue looping
aio: fix serial draining in exit_aio()
blk-mq: cleanup blk_mq_rq_to_pdu()
blk-mq: put blk_queue_rq_timeout together in blk_mq_init_queue()
block: remove redundant check about 'set->nr_hw_queues' in blk_mq_alloc_tag_set()
block: allocate request memory local to request queue
blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set
blk-mq: export blk_mq_run_hw_queues
blk-mq: add blk_mq_init_allocated_queue and export blk_mq_register_disk
In flush_busy_ctxs() and blk_mq_hctx_has_pending(), regardless of how many
ctxs assigned to one hctx, they will all loop hctx->ctx_map.map_size
times. Here hctx->ctx_map.map_size is a const ALIGN(nr_cpu_ids, 8) / 8.
Especially, flush_busy_ctxs() is in hot code path. And it's unnecessary.
Change ->map_size to contain the actually mapped software queues, so we
only loop for as many iterations as we have to.
And remove cpumask setting and nr_ctx count in blk_mq_init_cpu_queues()
since they are all re-done in blk_mq_map_swqueue().
blk_mq_map_swqueue().
Signed-off-by: Chong Yuan <chong.yuan@memblaze.com>
Reviewed-by: Wenbo Wang <wenbo.wang@memblaze.com>
Updated by me for formatting and commenting.
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull vfs update from Al Viro:
"Part one:
- struct filename-related cleanups
- saner iov_iter_init() replacements (and switching the syscalls to
use of those)
- ntfs switch to ->write_iter() (Anton)
- aio cleanups and splitting iocb into common and async parts
(Christoph)
- assorted fixes (me, bfields, Andrew Elble)
There's a lot more, including the completion of switchover to
->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags
race fixes, etc, but that goes after #for-davem merge. David has
pulled it, and once it's in I'll send the next vfs pull request"
* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits)
sg_start_req(): use import_iovec()
sg_start_req(): make sure that there's not too many elements in iovec
blk_rq_map_user(): use import_single_range()
sg_io(): use import_iovec()
process_vm_access: switch to {compat_,}import_iovec()
switch keyctl_instantiate_key_common() to iov_iter
switch {compat_,}do_readv_writev() to {compat_,}import_iovec()
aio_setup_vectored_rw(): switch to {compat_,}import_iovec()
vmsplice_to_user(): switch to import_iovec()
kill aio_setup_single_vector()
aio: simplify arguments of aio_setup_..._rw()
aio: lift iov_iter_init() into aio_setup_..._rw()
lift iov_iter into {compat_,}do_readv_writev()
NFS: fix BUG() crash in notify_change() with patch to chown_common()
dcache: return -ESTALE not -EBUSY on distributed fs race
NTFS: Version 2.1.32 - Update file write from aio_write to write_iter.
VFS: Add iov_iter_fault_in_multipages_readable()
drop bogus check in file_open_root()
switch security_inode_getattr() to struct path *
constify tomoyo_realpath_from_path()
...
Jan Engelhardt reports a strange oops with an invalid ->sense_buffer
pointer in scsi_init_cmd_errh() with the blk-mq code.
The sense_buffer pointer should have been initialized by the call to
scsi_init_request() from blk_mq_init_rq_map(), but there seems to be
some non-repeatable memory corruptor.
This patch makes sure we initialize the whole struct request allocation
(and the associated 'struct scsi_cmnd' for the SCSI case) to zero, by
using __GFP_ZERO in the allocation. The old code initialized a couple
of individual fields, leaving the rest undefined (although many of them
are then initialized in later phases, like blk_mq_rq_ctx_init() etc.
It's not entirely clear why this matters, but it's the rigth thing to do
regardless, and with 4.0 imminent this is the defensive "let's just make
sure everything is initialized properly" patch.
Tested-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linux 3.19 commit 69c953c ("lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n")
caused blk_stack_limits() to not properly stack queue_limits for stacked
devices (e.g. DM).
Fix this regression by establishing lcm_not_zero() and switching
blk_stack_limits() over to using it.
DM uses blk_set_stacking_limits() to establish the initial top-level
queue_limits that are then built up based on underlying devices' limits
using blk_stack_limits(). In the case of optimal_io_size (io_opt)
blk_set_stacking_limits() establishes a default value of 0. With commit
69c953c, lcm(0, n) is no longer n, which compromises proper stacking of
the underlying devices' io_opt.
Test:
$ modprobe scsi_debug dev_size_mb=10 num_tgts=1 opt_blks=1536
$ cat /sys/block/sde/queue/optimal_io_size
786432
$ dmsetup create node --table "0 100 linear /dev/sde 0"
Before this fix:
$ cat /sys/block/dm-5/queue/optimal_io_size
0
After this fix:
$ cat /sys/block/dm-5/queue/optimal_io_size
786432
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.19+
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
At the beginning of blk_mq_alloc_tag_set(), we have already checked whether
'set->nr_hw_queues' is zero, so here remove this redundant check.
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_init_rl() allocates a mempool using mempool_create_node() with node
local memory. This only allocates the mempool and element list locally
to the requeue queue node.
What we really want to do is allocate the request itself local to the
queue. To do this, we need our own alloc and free functions that will
allocate from request_cachep and pass the request queue node in to prefer
node local memory.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Use the right array index to reference the last
element of rq->biotail->bi_io_vec[]
Signed-off-by: Wenbo Wang <wenbo.wang@memblaze.com>
Reviewed-by: Chong Yuan <chong.yuan@memblaze.com>
Fixes: 66cb45aa41 ("block: add support for limiting gaps in SG lists")
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
When allocating from the reserved tags pool, bt_get() is called with
a NULL hctx. If all tags are in use, the hw queue is kicked to push
out any pending IO, potentially freeing tags, and tag allocation is
retried. The problem is that blk_mq_run_hw_queue() doesn't check for
a NULL hctx. So we avoid it with a simple NULL hctx test.
Tested by hammering mtip32xx with concurrent smartctl/hdparm.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Fixes: b32232073e ("blk-mq: fix hang in bt_get()")
Cc: stable@kernel.org
Added appropriate comment.
Signed-off-by: Jens Axboe <axboe@fb.com>
Return -EBUSY if we're unable to enter a queue immediately when
allocating a blk-mq request without __GFP_WAIT.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Rename blk_mq_run_queues to blk_mq_run_hw_queues, add async argument,
and export it.
DM's suspend support must be able to run the queue without starting
stopped hw queues.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add a variant of blk_mq_init_queue that allows a previously allocated
queue to be initialized. blk_mq_init_allocated_queue models
blk_init_allocated_queue -- which was also created for DM's use.
DM's approach to device creation requires a placeholder request_queue be
allocated for use with alloc_dev() but the decision about what type of
request_queue will be ultimately created is deferred until all component
devices referenced in the DM table are processed to determine the table
type (request-based, blk-mq request-based, or bio-based).
Also, because of DM's late finalization of the request_queue type
the call to blk_mq_register_disk() doesn't happen during alloc_dev().
Must export blk_mq_register_disk() so that DM can backfill the 'mq' dir
once the blk-mq queue is fully allocated.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If percpu_ref_init() fails the allocated q and hctxs must get cleaned
up; using 'err_map' doesn't allow that to happen.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block driver changes from Jens Axboe:
"This contains:
- The 4k/partition fixes for brd from Boaz/Matthew.
- A few xen front/back block fixes from David Vrabel and Roger Pau
Monne.
- Floppy changes from Takashi, cleaning the device file creation.
- Switching libata to use the new blk-mq tagging policy, removing
code (and a suboptimal implementation) from libata. This will
throw you a merge conflict, since a bug in the original libata
tagging code was fixed since this code was branched. Trivial.
From Shaohua.
- Conversion of loop to blk-mq, from Ming Lei.
- Cleanup of the io_schedule() handling in bsg from Peter Zijlstra.
He claims it improves on unreadable code, which will cost him a
beer.
- Maintainer update or NDB, now handled by Markus Pargmann.
- NVMe:
- Optimization from me that avoids a kmalloc/kfree per IO for
smaller (<= 8KB) IO. This cuts about 1% of high IOPS CPU
overhead.
- Removal of (now) dead RCU code, a relic from before NVMe was
converted to blk-mq"
* 'for-3.20/drivers' of git://git.kernel.dk/linux-block:
xen-blkback: default to X86_32 ABI on x86
xen-blkfront: fix accounting of reqs when migrating
xen-blkback,xen-blkfront: add myself as maintainer
block: Simplify bsg complete all
floppy: Avoid manual call of device_create_file()
NVMe: avoid kmalloc/kfree for smaller IO
MAINTAINERS: Update NBD maintainer
libata: make sata_sil24 use fifo tag allocator
libata: move sas ata tag allocation to libata-scsi.c
libata: use blk taging
NVMe: within nvme_free_queues(), delete RCU sychro/deferred free
null_blk: suppress invalid partition info
brd: Request from fdisk 4k alignment
brd: Fix all partitions BUGs
axonram: Fix bug in direct_access
loop: add blk-mq.h include
block: loop: don't handle REQ_FUA explicitly
block: loop: introduce lo_discard() and lo_req_flush()
block: loop: say goodby to bio
block: loop: improve performance via blk-mq
Pull core block IO changes from Jens Axboe:
"This contains:
- A series from Christoph that cleans up and refactors various parts
of the REQ_BLOCK_PC handling. Contributions in that series from
Dongsu Park and Kent Overstreet as well.
- CFQ:
- A bug fix for cfq for realtime IO scheduling from Jeff Moyer.
- A stable patch fixing a potential crash in CFQ in OOM
situations. From Konstantin Khlebnikov.
- blk-mq:
- Add support for tag allocation policies, from Shaohua. This is
a prep patch enabling libata (and other SCSI parts) to use the
blk-mq tagging, instead of rolling their own.
- Various little tweaks from Keith and Mike, in preparation for
DM blk-mq support.
- Minor little fixes or tweaks from me.
- A double free error fix from Tony Battersby.
- The partition 4k issue fixes from Matthew and Boaz.
- Add support for zero+unprovision for blkdev_issue_zeroout() from
Martin"
* 'for-3.20/core' of git://git.kernel.dk/linux-block: (27 commits)
block: remove unused function blk_bio_map_sg
block: handle the null_mapped flag correctly in blk_rq_map_user_iov
blk-mq: fix double-free in error path
block: prevent request-to-request merging with gaps if not allowed
blk-mq: make blk_mq_run_queues() static
dm: fix multipath regression due to initializing wrong request
cfq-iosched: handle failure of cfq group allocation
block: Quiesce zeroout wrapper
block: rewrite and split __bio_copy_iov()
block: merge __bio_map_user_iov into bio_map_user_iov
block: merge __bio_map_kern into bio_map_kern
block: pass iov_iter to the BLOCK_PC mapping functions
block: add a helper to free bio bounce buffer pages
block: use blk_rq_map_user_iov to implement blk_rq_map_user
block: simplify bio_map_kern
block: mark blk-mq devices as stackable
block: keep established cmd_flags when cloning into a blk-mq request
block: add blk-mq support to blk_insert_cloned_request()
block: require blk_rq_prep_clone() be given an initialized clone request
blk-mq: add tag allocation policy
...
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
The tape drivers (and the sg driver in a special case that doesn't matter
here) use the null_mapped flag to tell blk_rq_map_user to not copy around
any data into or out of the bounce buffers. blk_rq_map_user_iov never
got that treatment, which didn't matter until I refactored blk_rq_map_user
to be implemented in terms of blk_rq_map_user_iov.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: ddad8dd0a1 ("block: use blk_rq_map_user_iov to implement blk_rq_map_user")
Signed-off-by: Jens Axboe <axboe@fb.com>
If the allocation of bt->bs fails, then bt->map can be freed twice, once
in blk_mq_init_bitmap_tags() -> bt_alloc(), and once in
blk_mq_init_bitmap_tags() -> bt_free(). Fix by setting the pointer to
NULL after the first free.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If the queue has SG_GAPS set, we must not merge across an sg gap.
This is caught for the bio case, but currently not for the
more rare case of merging two requests directly.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cut the dm bits, those will go through the dm tree, and fixed
the test_bit() test.
Signed-off-by: Jens Axboe <axboe@fb.com>
We no longer use it outside of blk-mq.c, so we can make it static
and stop exporting it. Additionally, kill the 'async' argument, as
there's only one used of it.
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull EFI updates from Ingo Molnar:
"Main changes:
- Move efivarfs from the misc filesystem section to pseudo filesystem
- Expose firmware platform size in sysfs
- Improve robustness of get_memory_map() by removing assumptions on
the size of efi_memory_desc_t.
- various cleanups and fixes
The biggest risk is the get_memory_map() change, which changes the way
that both the arm64 and x86 EFI boot stub build the early memory map.
There are no known regressions with it at the moment, BYMMV"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Don't look for chosen@0 node on DT platforms
firmware: efi: Remove unneeded guid unparse
efi/libstub: Call get_memory_map() to obtain map and desc sizes
efi: Small leak on error in runtime map code
efi: rtc-efi: Mark UIE as unsupported
arm64/efi: efistub: Apply __init annotation
efi: Expose underlying UEFI firmware platform size to userland
efi: Rename efi_guid_unparse to efi_guid_to_str
efi: Update the URLs for efibootmgr
fs: Make efivarfs a pseudo filesystem, built by default with EFI
