The sam9x5ek board has 2 jacks:
headphone wired on RHPOUT/LHPOUT of the wm8731
line in wired on LLINEIN/RLINEIN of the wm8731
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Enable the SSC needed for the WM8731 codec
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The WM8731 codec on sam9x5ek board is on i2c, address 1A
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The PQFP version have only 3 gpio banks (A, B & C).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[nicolas.ferre@atmel.com: correct typo in "status" property]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Correct pin number of gpio-key for at91sam9n12ek board.
The pioB4 is connect to LED, the pioB3 use as gpio-key.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
ARM Performance Monitor Units are available on the sama5d3, add the support in
the dtsi.
Tested with perf and oprofile on the sama5d31ek.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
pinctrl-names was missing causing mmc pinctrl to never be requested.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: added a commit message taken from Ludovic]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Pull powerpc fixes from Ben Herrenschmidt:
"This includes small series from Michael Neuling to fix a couple of
nasty remaining problems with the new Power8 support, also targeted at
stable 3.10, without which some new userspace accessible registers
aren't properly context switched, and in some case, can be clobbered
by the user of transactional memory.
Along with that, a few slightly more minor things, such as a missing
Kconfig option to enable handling of denorm exceptions when not
running under a hypervisor (or userspace will randomly crash when
hitting denorms with the vector unit), some nasty bugs in the new
pstore oops code, and other simple bug fixes worth having in now.
Note: I picked up the two powerpc KVM fixes as Alex Graf asked me to
handle KVM bits while he is on vacation. However I'll let him decide
whether they should go to -stable or not when he is back"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs
powerpc: Save the TAR register earlier
powerpc: Fix context switch DSCR on POWER8
powerpc: Rework setting up H/FSCR bit definitions
powerpc: Fix hypervisor facility unavaliable vector number
powerpc/kvm/book3s_pr: Return appropriate error when allocation fails
powerpc/kvm: Add signed type cast for comparation
powerpc/eeh: Add missing procfs entry for PowerNV
powerpc/pseries: Add backward compatibilty to read old kernel oops-log
powerpc/pseries: Fix buffer overflow when reading from pstore
powerpc: On POWERNV enable PPC_DENORMALISATION by default
- omapdss: compilation fix and DVI fix for PandaBoard
- mxsfb: fix colors when using 18bit LCD bus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=bHE/
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- omapdss: compilation fix and DVI fix for PandaBoard
- mxsfb: fix colors when using 18bit LCD bus
* tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
ARM: OMAP: dss-common: fix Panda's DVI DDC channel
video: mxsfb: fix color settings for 18bit data bus and 32bpp
OMAPDSS: analog-tv-connector: compile fix
If a transaction is rolled back, the Target Address Register (TAR), Processor
Priority Register (PPR) and Data Stream Control Register (DSCR) should be
restored to the checkpointed values before the transaction began. Any changes
to these SPRs inside the transaction should not be visible in the abort
handler.
Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR. If
we preempt a processes inside a transaction which has modified any of these, on
process restore, that same transaction may be aborted we but we won't see the
checkpointed versions of these SPRs.
This adds checkpointed versions of these SPRs to the thread_struct and adds the
save/restore of these three SPRs to the treclaim/trechkpt code.
Without this if any of these SPRs are modified during a transaction, users may
incorrectly see a speculated SPR value even if the transaction is aborted.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This moves us to save the Target Address Register (TAR) a earlier in
__switch_to. It introduces a new function save_tar() to do this.
We need to save the TAR earlier as we will overwrite it in the transactional
memory reclaim/recheckpoint path. We are going to do this in a subsequent
patch which will fix saving the TAR register when it's modified inside a
transaction.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
POWER8 allows the DSCR to be accessed directly from userspace via a new SPR
number 0x3 (Rather than 0x11. DSCR SPR number 0x11 is still used on POWER8 but
like POWER7, is only accessible in HV and OS modes). Currently, we allow this
by setting H/FSCR DSCR bit on boot.
Unfortunately this doesn't work, as the kernel needs to see the DSCR change so
that it knows to no longer restore the system wide version of DSCR on context
switch (ie. to set thread.dscr_inherit).
This clears the H/FSCR DSCR bit initially. If a process then accesses the DSCR
(via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in
facility_unavailable_exception().
We also change _switch() so that we set or clear the H/FSCR DSCR bit based on
the thread.dscr_inherit.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This reworks the Facility Status and Control Regsiter (FSCR) config bit
definitions so that we can access the bit numbers. This is needed for a
subsequent patch to fix the userspace DSCR handling.
HFSCR and FSCR bit definitions are the same, so reuse them.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we
mark it as an OS facility unavaliable (0xf60) as the two share the same code
path.
The becomes a problem in facility_unavailable_exception() as we aren't able to
see the hypervisor facility unavailable exceptions.
Below fixes this by duplication the required macros.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
err was overwritten by a previous function call, and checked to be 0. If
the following page allocation fails, 0 is going to be returned instead
of -ENOMEM.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
'rmls' is 'unsigned long', lpcr_rmls() will return negative number when
failure occurs, so it need a type cast for comparing.
'lpid' is 'unsigned long', kvmppc_alloc_lpid() return negative number
when failure occurs, so it need a type cast for comparing.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The procfs entry for global statistics has been missed on PowerNV
platform and the patch is going to add that.
Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Older kernels has just length information in their header. Handle it
while reading old kernel oops log from pstore.
Applies on top of powerpc/pseries: Fix buffer overflow when reading from pstore
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
When reading from pstore there is a buffer overflow during decompression
due to the header added in unzip_oops. Remove unzip_oops and call
pstore_decompress directly in nvram_pstore_read. Allocate buffer of size
report_length of the oops header as header will not be deallocated in pstore.
Since we have 'openssl' command line tool to decompress the compressed data,
dump the compressed data in case decompression fails instead of not dumping
anything.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We want PPC_DENORMALISATION enabled when POWERNV is enabled,
so update the Kconfig.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
there is an additional "{", which causes building error.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Pull misc x86 fixes from Peter Anvin.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, amd, microcode: Fix error path in apply_microcode_amd()
x86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.daz
x86, efi: correct call to free_pages
x86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipset
Pull MIPS fixes from Ralf Baechle:
"Two platform-specific fixes plus a fix for oprofile which was calling
smp_processor_id() in preemptible code"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0
MIPS: oprofile: Fix BUG due to smp_processor_id() in preemptible code.
MIPS: PNX833x: PNX8335_PCI_ETHERNET_INT depends on CONFIG_SOC_PNX8335
Pull s390 fixes from Martin Schwidefsky:
"Enable LZ4 compression for the kernel image, add the machine id for
the new zBC12 model, fix an issue with hanging dasd devices, correct a
Kconfig dependency, fix a compile error in the perf module with
CONFIG_KVM=n and fix the find_next_bit_left primitive for the PCI base
layer"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix hanging devices after path events
s390/perf: fix compile error (undefined reference sie_exit)
s390/bitops: fix find_next_bit_left
s390: add support for IBM zBC12 machine
s390/Kconfig: select 'TTY' when 'S390_GUEST' is enabled
s390: add support for LZ4-compressed kernel
The hardware interrupt routing for boot CPU != 0 is wrong because it
will route all the hardware interrupts to TP0 which is not the one we
booted from. Fix this by properly checking which boot CPU we are booting
from and updating the right interrupt mask for the boot CPU. This fixes
booting on BCM3368 with bmips_smp_emabled = 0.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5650/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The PNX8335_PCI_ETHERNET_INT macro is defined in
arch/mips/include/asm/mach-pnx833x/irq-mapping.h
only if CONFIG_SOC_PNX8335 is selected.
Fixes the following randconfig problem:
arch/mips/pnx833x/common/platform.c:210:12:
error: 'PNX8335_PIC_ETHERNET_INT' undeclared here
(not in a function)
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5585/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This was missed when splitting out the phy from the controller node in
commit 9dffe3be3f (ARM: tegra: modify ULPI reset GPIO properties).
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch removes sti_secondary_start from _INIT section, there are 2
reason for this removal.
1. discarding such a small code does not save much, given the RAM
sizes.
2. Having this code discarded, creates corruption issue when we boot
smp-kernel with nrcpus=1 or with single cpu node in DT.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch fixes cpu nodes with device_type = "cpu". This change was not
necessary before 3.10-rc7.
Without this patch STi SOCs does not boot as SMP.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Lager board: do not annotate gpio_buttons as __initdata
- This avoids accessing uninitialised memory if keys are pressed
after kernel initialisation completes.
- Bug introduced in gpio-keys were enabled in v3.11-rc1
* Bock-W board: fix SDHI0 PFC settings
- Allow detection of SD card
- Bug introduced in SDHI support was added in v3.11-rc1
* shdma: fixup sh_dmae_get_partial() calculation error
- Bug introduced in 2.6.34-rc1.
* armadillo800eva board: Don't request GPIO 166 in board code
- Allow use of touchscreen
- Bug introduced in v3.11-rc1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=B1WZ
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
From Simon Horman:
Second round of Renesas ARM based SoC fixes for v3.11
* Lager board: do not annotate gpio_buttons as __initdata
- This avoids accessing uninitialised memory if keys are pressed
after kernel initialisation completes.
- Bug introduced in gpio-keys were enabled in v3.11-rc1
* Bock-W board: fix SDHI0 PFC settings
- Allow detection of SD card
- Bug introduced in SDHI support was added in v3.11-rc1
* shdma: fixup sh_dmae_get_partial() calculation error
- Bug introduced in 2.6.34-rc1.
* armadillo800eva board: Don't request GPIO 166 in board code
- Allow use of touchscreen
- Bug introduced in v3.11-rc1
* tag 'renesas-fixes2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: lager: do not annotate gpio_buttons as __initdata
ARM: shmobile: BOCK-W: fix SDHI0 PFC settings
shdma: fixup sh_dmae_get_partial() calculation error
ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code
Signed-off-by: Olof Johansson <olof@lixom.net>
regression and an AM33xx cpgmac power management regression.
Basic build, boot, and PM tests are available here:
http://www.pwsan.com/omap/testlogs/hwmod_fixes_a_v3.11-rc/20130730042132/
The tests include temporary fixes for the unrelated 2430SDP and OMAP3
boot regressions, which are not part of this signed tag.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=i6Ek
-----END PGP SIGNATURE-----
Merge tag 'for-v3.11-rc/omap-fixes-b' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes
From Paul Walmsley via Tony Lindgren:
Some OMAP hwmod fixes for v3.11-rc. Mostly intended to fix an earlyprintk
regression and an AM33xx cpgmac power management regression.
Basic build, boot, and PM tests are available here:
http://www.pwsan.com/omap/testlogs/hwmod_fixes_a_v3.11-rc/20130730042132/
The tests include temporary fixes for the unrelated 2430SDP and OMAP3
boot regressions, which are not part of this signed tag.
* tag 'for-v3.11-rc/omap-fixes-b' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space
ARM: OMAP2+: hwmod: rt address space index for DT
ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state
ARM: OMAP2+: Avoid idling memory controllers with no drivers
ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL
Signed-off-by: Olof Johansson <olof@lixom.net>
Due to wrong older revision of documentation used as reference, we
seem to have a bunch of LDOs wrongly configured on OMAP5 uEVM. This
series is based power tree on production board 750-2628-XXX platform.
Unfortunately, the wrong voltages may be detrimental to OMAP5 as they
supply hardware blocks at voltages that are out of specification.
There is a chance that without these fixes there can be hardware
damage to omap5-uevm boards with the v3.11-rc series.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=fW5m
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.11/fixes-omap5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Fixes for omap5-uevm regulators from Nishanth Menon <nm@ti.com>:
Due to wrong older revision of documentation used as reference, we
seem to have a bunch of LDOs wrongly configured on OMAP5 uEVM. This
series is based power tree on production board 750-2628-XXX platform.
Unfortunately, the wrong voltages may be detrimental to OMAP5 as they
supply hardware blocks at voltages that are out of specification.
There is a chance that without these fixes there can be hardware
damage to omap5-uevm boards with the v3.11-rc series.
* tag 'omap-for-v3.11/fixes-omap5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap5-uevm: update optional/unused regulator configurations
ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC
ARM: dts: omap5-uevm: document regulator signals used on the actual board
Signed-off-by: Olof Johansson <olof@lixom.net>
Two small fixes for MSM.
The first fixes the a gpio controller register address. I didn't see
any acks from the devicetree maintainers, so I've copied them on this
pull request. The change itself is minor, and just to the register
address.
The second change removes the gpiomux V1 code from MSM. This was
breaking compilation for some of the targets.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=qmE5
-----END PGP SIGNATURE-----
Merge tag 'msm-3.11-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into fixes
From David Brown, fixes for MSM for 3.11:
Two small fixes for MSM.
The first fixes the a gpio controller register address. I didn't see
any acks from the devicetree maintainers, so I've copied them on this
pull request. The change itself is minor, and just to the register
address.
The second change removes the gpiomux V1 code from MSM. This was
breaking compilation for some of the targets.
* tag 'msm-3.11-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
ARM: msm: Consolidate gpiomux for older architectures
ARM: msm: dts: Fix the gpio register address for msm8960
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull arm fixes fixes from Russell King:
"This fixes a couple of problems with commit 48be69a026 ("ARM: move
signal handlers into a vdso-like page"), one of which was originally
discovered via my testing originally, but the fix for it was never
actually committed.
The other shows up on noMMU builds, and such platforms are extremely
rare and as such are not part of my nightly testing"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page)
ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)
Olof reports that noMMU builds error out with:
arch/arm/kernel/signal.c: In function 'setup_return':
arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage'
This shows one of the evilnesses of IS_ENABLED(). Get rid of it here
and replace it with #ifdef's - and as no noMMU platform can make use
of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Unfortunately, I never committed the fix to a nasty oops which can
occur as a result of that commit:
------------[ cut here ]------------
kernel BUG at /home/olof/work/batch/include/linux/mm.h:414!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe0308 #53
task: e90acac0 ti: e9be8000 task.ti: e9be8000
PC is at special_mapping_fault+0xa4/0xc4
LR is at __do_fault+0x68/0x48c
This doesn't show up unless you do quite a bit of testing; a simple
boot test does not do this, so all my nightly tests were passing fine.
The reason for this is that install_special_mapping() expects the
page array to stick around, and as this was only inserting one page
which was stored on the kernel stack, that's why this was blowing up.
Reported-by: Olof Johansson <olof@lixom.net>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull powerpc fixes from Ben Herrenschmidt:
"Here is not quite a handful of powerpc fixes for rc3.
The windfarm fix is a regression fix (though not a new one), the PMU
interrupt rename is not a fix per-se but has been submitted a long
time ago and I kept forgetting to put it in (it puts us back in sync
with x86), the other perf bit is just about putting an API/ABI bit
definition in the right place for userspace to consume, and finally,
we have a fix for the VPHN (Virtual Partition Home Node) feature
(notification that the hypervisor is moving nodes around) which could
cause lockups so we may as well fix it now"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/windfarm: Fix noisy slots-fan on Xserve (rm31)
powerpc: VPHN topology change updates all siblings
powerpc/perf: Export PERF_EVENT_CONFIG_EBB_SHIFT to userspace
powerpc: Rename PMU interrupts from CNT to PMI
Pull ARM fixes from Russell King:
"I've thought long and hard about what to say for this pull request,
and I really can't work out anything sane to say to summarise much of
these commits. The problem is, for most of these are, yet again, lots
of small bits scattered around the place without any real overall
theme to them"
Most notable is probably the kuser page helper improvements.
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (22 commits)
ARM: Add .text annotations where required after __CPUINIT removal
ARM: 7803/1: Fix deadlock scenario with smp_send_stop()
ARM: make vectors page inaccessible from userspace
ARM: move signal handlers into a vdso-like page
ARM: allow kuser helpers to be removed from the vector page
ARM: update FIQ support for relocation of vectors
ARM: use linker magic for vectors and vector stubs
ARM: move vector stubs
ARM: poison memory between kuser helpers
ARM: poison the vectors page
ARM: 7801/1: v6: prevent gcc 4.5 from reordering extended CP15 reads above is_smp() test
ARM: 7800/1: ARMv7-M: Fix name of NVIC handler function
ARM: Fix sorting of machine- initializers
ARM: 7791/1: a.out: remove partial a.out support
ARM: 7790/1: Fix deferred mm switch on VIVT processors
ARM: 7789/1: Do not run dummy_flush_tlb_a15_erratum() on non-Cortex-A15
ARM: 7787/1: virt: ensure visibility of __boot_cpu_mode
ARM: 7788/1: elf: fix lpae hwcap feature reporting in proc/cpuinfo
ARM: 7786/1: hyp: fix macro parameterisation
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory
...
