Commit Graph

67 Commits

Author SHA1 Message Date
Thomas Zimmermann 169b9182f1 drm/atomic-helper: Add atomic_enable plane-helper callback
Add atomic_enable to struct drm_plane_helper_funcs. It enables a
plane independently from updating the plane's content. As such, it is
the inverse of the atomic_disable plane helper. Useful for hardware
where plane enable state is independent from plane content.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-2-tzimmermann@suse.de
2023-02-20 15:19:23 +01:00
Thomas Zimmermann 7e9a14adf3 drm: Define enum mode_set_atomic in drm_modeset_helper_tables.h
Define enum mode_set_atomic next to the only interface that uses
the type. This will allow for removing several include statements
for drm_fb_helper.h. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-7-tzimmermann@suse.de
2023-01-13 13:19:13 +01:00
Dmitry Baryshkov c8268795c9 drm/probe-helper: enable and disable HPD on connectors
Introduce two drm_connector_helper_funcs: enable_hpd() and disable_hpd().
They are called by drm_kms_helper_poll_enable() and
drm_kms_helper_poll_disable() (and thus drm_kms_helper_poll_init() and
drm_kms_helper_poll_fini()) respectively.

This allows DRM drivers to rely on drm_kms_helper_poll for enabling and
disabling HPD detection rather than doing that manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-3-dmitry.baryshkov@linaro.org
2023-01-05 14:59:44 +01:00
Thomas Zimmermann 94d879eaf7 drm/atomic-helper: Add {begin,end}_fb_access to plane helpers
Add {begin,end}_fb_access helpers to run at the beginning and end of
an atomic commit. The begin_fb_access helper acquires resources that
are necessary to perform the atomic commit. It it similar to prepare_fb,
except that the resources are to be released at the end of the commit.
Resources acquired by prepare_fb are held until after the next pageflip.

The end_fb_access helper performs the corresponding resource cleanup.
Atomic helpers call it with the new plane state. This is different from
cleanup_fb, which releases resources of the old plane state.

v2:
	* fix typos in commit message (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025101737.8874-2-tzimmermann@suse.de
2022-11-08 17:10:27 +01:00
Sui Jingfeng 20b734c112 drm/drm_modeset_helper_vtables.h: fix a typo
change upate to update

Signed-off-by: Sui Jingfeng <15330273260@189.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406073036.276288-1-15330273260@189.cn
2022-04-06 15:23:08 +02:00
Daniel Vetter 7d30963fd1 drm/atomic-helper: make drm_gem_plane_helper_prepare_fb the default
There's a bunch of atomic drivers who don't do this quite correctly,
luckily most of them aren't in wide use or people would have noticed
the tearing.

By making this the default we avoid the constant audit pain and can
additionally remove a ton of lines from vfuncs for a bit more clarity
in smaller drivers.

While at it complain if there's a cleanup_fb hook but no prepare_fb
hook, because that makes no sense. I haven't found any driver which
violates this, but better safe than sorry.

Subsequent patches will reap the benefits.

v2: It's neither ... nor, not not (Sam)

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210623162200.3372056-1-daniel.vetter@ffwll.ch
2021-06-24 15:35:13 +02:00
Maxime Ripard 977697e20b
drm/atomic: Pass the full state to planes atomic disable and update
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's convert the remaining helpers to provide a consistent interface,
this time with the planes atomic_update and atomic_disable.

The conversion was done using the coccinelle script below, built tested on
all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

 struct drm_plane_helper_funcs {
 	...
	void (*atomic_update)(struct drm_plane *plane,
-			      struct drm_plane_state *plane_state);
+			      struct drm_atomic_state *state);
 	...
 }

@@
identifier plane, plane_state;
symbol state;
@@

 struct drm_plane_helper_funcs {
	...
	void (*atomic_disable)(struct drm_plane *plane,
-			       struct drm_plane_state *plane_state);
+			       struct drm_atomic_state *state);
	...
 }

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
 static const struct drm_plane_helper_funcs helpers = {
 	...,
 	.atomic_update = func,
	...,
 };
|
 static const struct drm_plane_helper_funcs helpers = {
 	...,
 	.atomic_disable = func,
	...,
 };
)

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier crtc_state;
identifier plane, plane_state, state;
expression e;
@@

 f(struct drm_crtc_state *crtc_state)
 {
 	...
 	struct drm_atomic_state *state = e;
 	<+...
(
-	FUNCS->atomic_disable(plane, plane_state)
+	FUNCS->atomic_disable(plane, state)
|
-	FUNCS->atomic_update(plane, plane_state)
+	FUNCS->atomic_update(plane, state)
)
 	...+>
 }

@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

 func(struct drm_plane *plane,
-    struct drm_plane_state *state)
+    struct drm_plane_state *old_plane_state)
 {
	<...
-	state
+	old_plane_state
	...>
 }

@ ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, old_state;
@@

 func(struct drm_plane *plane, struct drm_plane_state *old_state)
 {
	... when != old_state
 }

@ adds_old_state depends on plane_atomic_func && !ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

 func(struct drm_plane *plane, struct drm_plane_state *plane_state)
 {
+	struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
 	...
 }

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

 func(struct drm_plane *plane,
-     struct drm_plane_state *plane_state
+     struct drm_atomic_state *state
     )
 { ... }

@ include depends on adds_old_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

 func(struct drm_plane *plane, struct drm_atomic_state *state) {
 	...
 	struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
 	<+...
-	plane_state->state
+	state
 	...+>
 }

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-25 08:05:28 +01:00
Maxime Ripard 7c11b99a8e
drm/atomic: Pass the full state to planes atomic_check
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.

The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

 struct drm_plane_helper_funcs {
 	...
	int (*atomic_check)(struct drm_plane *plane,
-			    struct drm_plane_state *plane_state);
+			    struct drm_atomic_state *state);
	...
}

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

static const struct drm_plane_helper_funcs helpers = {
	...,
 	.atomic_check = func,
	...,
};

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@

 f(struct drm_device *dev, struct drm_atomic_state *state)
 {
 	<+...
-	FUNCS->atomic_check(plane, plane_state)
+	FUNCS->atomic_check(plane, state)
 	...+>
 }

@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

 func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
 {
	... when != new_plane_state
 }

@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

 func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
 {
+	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
 	...
 }

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

 func(struct drm_plane *plane,
-     struct drm_plane_state *new_plane_state
+     struct drm_atomic_state *state
     )
 { ... }

@ include depends on adds_new_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24 20:27:00 +01:00
Maxime Ripard 5ddb0bd4dd
drm/atomic: Pass the full state to planes async atomic check and update
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's start convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_async_check and
atomic_async_update.

The conversion was done using the coccinelle script below, built tested on
all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

 struct drm_plane_helper_funcs {
 	...
	int (*atomic_async_check)(struct drm_plane *plane,
-				  struct drm_plane_state *plane_state);
+				  struct drm_atomic_state *state);
	...
 }

@@
identifier plane, plane_state;
symbol state;
@@
 struct drm_plane_helper_funcs {
 	...
	void (*atomic_async_update)(struct drm_plane *plane,
-				    struct drm_plane_state *plane_state);
+				    struct drm_atomic_state *state);
	...
 }

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
 static const struct drm_plane_helper_funcs helpers = {
	...,
 	.atomic_async_check = func,
	...,
 };
|
 static const struct drm_plane_helper_funcs helpers = {
 	...,
 	.atomic_async_update = func,
 	...,
 };
)

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@

 f(struct drm_device *dev, struct drm_atomic_state *state)
 {
 	<+...
-	FUNCS->atomic_async_check(plane, plane_state)
+	FUNCS->atomic_async_check(plane, state)
 	...+>
 }

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@

 f(struct drm_device *dev, struct drm_atomic_state *state)
 {
 	<+...
-	FUNCS->atomic_async_update(plane, plane_state)
+	FUNCS->atomic_async_update(plane, state)
 	...+>
 }

@@
identifier mtk_plane_atomic_async_update;
identifier plane;
symbol new_state, state;
expression e;
@@

  void mtk_plane_atomic_async_update(struct drm_plane *plane, struct drm_plane_state *new_state)
{
  ...
- struct mtk_plane_state *state = e;
+ struct mtk_plane_state *new_plane_state = e;
  <+...
-       state
+       new_plane_state
  ...+>
  }

@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

 func(struct drm_plane *plane,
-    struct drm_plane_state *state)
+    struct drm_plane_state *new_plane_state)
 {
	<...
-	state
+	new_plane_state
	...>
 }

@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

 func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
 {
	... when != new_plane_state
 }

@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@

 func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
 {
+	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
 	...
 }

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

 func(struct drm_plane *plane,
-     struct drm_plane_state *plane_state
+     struct drm_atomic_state *state
     )
 { ... }

@ include depends on adds_new_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

 func(struct drm_plane *plane, struct drm_atomic_state *state) {
        ...
        struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
        <+...
-       plane_state->state
+       state
        ...+>
 }

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-1-maxime@cerno.tech
2021-02-24 20:26:48 +01:00
Thomas Zimmermann 820c170717 drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpers
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting,
but currently located next to framebuffer helpers. Move it to GEM atomic
helpers, rename it slightly and adopt the drivers. Same for the rsp
simple-pipe helper.

Compile-tested with x86-64, aarch64 and arm. The patch is fairly large,
but there are no functional changes.

v3:
	* remove out-comented line in drm_gem_framebuffer_helper.h
	  (Maxime)
v2:
	* rename to drm_gem_plane_helper_prepare_fb() (Daniel)
	* add tutorial-style documentation

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-23 08:54:22 +01:00
Daniel Vetter 73dc923eeb - Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
 - R-Car DU miscellaneous fixes
 - Miscellaneous bridge and bridge bindings fixes
 - Assorted misc driver cleanups
 - Constify drm_driver for PCI devices
 -----BEGIN PGP SIGNATURE-----
 
 iQJWBAABCgBAFiEEy51od1KYIM1TCZsbZficN7xUIQ0FAl/z+e0iHGxhdXJlbnQu
 cGluY2hhcnRAaWRlYXNvbmJvYXJkLmNvbQAKCRBl+Jw3vFQhDc4jEAC0jEoDN8IK
 dEF/3DrG7P6v5FDk/+XqEkXYXLq/lJAVVKialQOn0mWYpdHOZn3POww7RM2qmvkp
 M3pJHx915Gq+McrAIehVuA8DFTIblUvX8iJYFhfXnIDJPccd2nCl34P914B8y4X+
 jEJxDu5eHaiEavUrWttGOJQfP80V0b2pGFD1m85WA3DOtpgKFK12l3UqVrOIIYp3
 kwaDYCN29hImmSOM1+PJjna2ZTaY1sJ4SWJzl5yHHLzWw6kf2RuA6hkMvhDuCZWW
 C/NlN4vYYDQKteMzG5jI1eijjkR0nl0S8MmS+ZMh2vPfDkDDnweZwKHbPZ90BLJi
 5yd6OeVkhFIn75JQk8XDEwYnsAAdK6CWsfKscCsemda7TPL9J7xniSuWUKTuG9TM
 axJl2/VLxpO/99vGA1yBByg4Ypuq3tY2iPFWVKgSPZ5F4di28Q5ZJzkv1Ul9CJoK
 7gHLk2ZM4bnsaNxhGjQB1IMZwnfBpmrddXQYDBPGvUpGDX3K4dJItA+vGR5FnKAH
 pJSC+C1JPI6OzDH6MLg4uolMFR3iMpnqffHtpLl/ElwbNk9VP6qArfihNmdYicgT
 UNbsQnOLCA9NBmGTaEy78DOzgrgvtxvc8KvUyXlgiXy8DWLwkShVgWoI4FJw7cTQ
 xxd6CER00mi43i6NfxNBnlO0vMLY4bPeeA==
 =eQ9W
 -----END PGP SIGNATURE-----

Merge tag 'du-next-20210105' of git://linuxtv.org/pinchartl/media into drm-next

- Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
- R-Car DU miscellaneous fixes
- Miscellaneous bridge and bridge bindings fixes
- Assorted misc driver cleanups
- Constify drm_driver for PCI devices

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X/P8IOrVXkTpLeCm@pendragon.ideasonboard.com
2021-01-07 13:02:57 +01:00
Laurent Pinchart 2551952e80 drm: Add default modes for connectors in unknown state
The DRM CRTC helpers add default modes to connectors in the connected
state if no mode can be retrieved from the connector. This behaviour is
useful for VGA or DVI outputs that have no connected DDC bus. However,
in such cases, the status of the output usually can't be retrieved and
is reported as connector_status_unknown.

Extend the addition of default modes to connectors in an unknown state
to support outputs that can retrieve neither the modes nor the
connection status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05 07:19:50 +02:00
Maxime Ripard ddadd40892
drm: Introduce an atomic_commit_setup function
Private objects storing a state shared across all CRTCs need to be
carefully handled to avoid a use-after-free issue.

The proper way to do this to track all the commits using that shared
state and wait for the previous commits to be done before going on with
the current one to avoid the reordering of commits that could occur.

However, this commit setup needs to be done after
drm_atomic_helper_setup_commit(), because before the CRTC commit
structure hasn't been allocated before, and before the workqueue is
scheduled, because we would be potentially reordered already otherwise.

That means that drivers currently have to roll their own
drm_atomic_helper_commit() function, even though it would be identical
if not for the commit setup.

Let's introduce a hook to do so that would be called as part of
drm_atomic_helper_commit, allowing us to reuse the atomic helpers.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-2-maxime@cerno.tech
2020-12-15 11:33:08 +01:00
Maxime Ripard eca22edb37
drm: Pass the full state to connectors atomic functions
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Now that the CRTCs have been converted, let's move forward with the
connectors to provide a consistent interface.

The conversion was done using the coccinelle script below, and built tested
on all the drivers.

@@
identifier connector, connector_state;
@@

 struct drm_connector_helper_funcs {
	...
	struct drm_encoder* (*atomic_best_encoder)(struct drm_connector *connector,
-						   struct drm_connector_state *connector_state);
+						   struct drm_atomic_state *state);
	...
}

@@
identifier connector, connector_state;
@@

 struct drm_connector_helper_funcs {
	...
	void (*atomic_commit)(struct drm_connector *connector,
-			      struct drm_connector_state *connector_state);
+			      struct drm_atomic_state *state);
	...
}

@@
struct drm_connector_helper_funcs *FUNCS;
identifier state;
identifier connector, connector_state;
identifier f;
@@

 f(..., struct drm_atomic_state *state, ...)
 {
	<+...
-	FUNCS->atomic_commit(connector, connector_state);
+	FUNCS->atomic_commit(connector, state);
	...+>
 }

@@
struct drm_connector_helper_funcs *FUNCS;
identifier state;
identifier connector, connector_state;
identifier var, f;
@@

 f(struct drm_atomic_state *state, ...)
 {
	<+...
-	var = FUNCS->atomic_best_encoder(connector, connector_state);
+	var = FUNCS->atomic_best_encoder(connector, state);
	...+>
 }

@ connector_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_connector_helper_funcs helpers = {
	...,
	.atomic_best_encoder = func,
	...,
};
|
static struct drm_connector_helper_funcs helpers = {
	...,
	.atomic_commit = func,
	...,
};
)

@@
identifier connector_atomic_func.func;
identifier connector;
symbol state;
@@

 func(struct drm_connector *connector,
-      struct drm_connector_state *state
+      struct drm_connector_state *connector_state
      )
 {
	...
-	state
+	connector_state
 	...
 }

@ ignores_state @
identifier connector_atomic_func.func;
identifier connector, connector_state;
@@

 func(struct drm_connector *connector,
      struct drm_connector_state *connector_state)
{
	... when != connector_state
}

@ adds_state depends on connector_atomic_func && !ignores_state @
identifier connector_atomic_func.func;
identifier connector, connector_state;
@@

 func(struct drm_connector *connector, struct drm_connector_state *connector_state)
 {
+	struct drm_connector_state *connector_state = drm_atomic_get_new_connector_state(state, connector);
	...
 }

@ depends on connector_atomic_func @
identifier connector_atomic_func.func;
identifier connector_state;
identifier connector;
@@

 func(struct drm_connector *connector,
-     struct drm_connector_state *connector_state
+     struct drm_atomic_state *state
	   )
 { ... }

@ include depends on adds_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118094758.506730-1-maxime@cerno.tech
2020-11-20 12:23:53 +01:00
Maxime Ripard f6ebe9f9c9
drm/atomic: Pass the full state to CRTC atomic begin and flush
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's start convert all the remaining helpers to provide a consistent
interface, starting with the CRTC's atomic_begin and atomic_flush.

The conversion was done using the coccinelle script below, built tested on
all the drivers and actually tested on vc4.

virtual report

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier old_crtc_state, old_state;
identifier crtc;
identifier f;
@@

 f(struct drm_crtc_state *old_crtc_state)
 {
	...
 	struct drm_atomic_state *old_state = old_crtc_state->state;
	<...
-	FUNCS->atomic_begin(crtc, old_crtc_state);
+	FUNCS->atomic_begin(crtc, old_state);
	...>
 }

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier old_crtc_state, old_state;
identifier crtc;
identifier f;
@@

 f(struct drm_crtc_state *old_crtc_state)
 {
	...
 	struct drm_atomic_state *old_state = old_crtc_state->state;
	<...
-	FUNCS->atomic_flush(crtc, old_crtc_state);
+	FUNCS->atomic_flush(crtc, old_state);
	...>
 }

@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier f;
@@

 f(struct drm_device *dev, struct drm_atomic_state *state, ...)
 {
	<...
-	FUNCS->atomic_begin(crtc, crtc_state);
+	FUNCS->atomic_begin(crtc, state);
	...>
 }

@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier f;
@@

 f(struct drm_device *dev, struct drm_atomic_state *state, ...)
 {
	<...
-	FUNCS->atomic_flush(crtc, crtc_state);
+	FUNCS->atomic_flush(crtc, state);
	...>
 }

@@
identifier crtc, old_state;
@@

 struct drm_crtc_helper_funcs {
	...
-	void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+	void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state);
	...
-	void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+	void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state);
	...
}

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_begin = func,
	...,
};
|
static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_flush = func,
	...,
};
)

@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc,
		struct drm_crtc_state *old_state)
{
	... when != old_state
}

@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+	struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
	...
}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@

void func(...)
{
	...
-	T state = E;
+	T crtc_state = E;
	<+...
-	state
+	crtc_state
	...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@

void func(...)
{
	...
-	T state;
+	T crtc_state;
	<+...
-	state
+	crtc_state
	...+>

}

@@
identifier old_state;
identifier crtc;
@@

 void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
-			   struct drm_crtc_state *old_state
+			   struct drm_atomic_state *state
			   )
{
+	struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
	...
}

@@
identifier old_state;
identifier crtc;
@@

 void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
-			   struct drm_crtc_state *old_state
+			   struct drm_atomic_state *state
			   );

@@
identifier old_state;
identifier crtc;
@@

 void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
-			   struct drm_crtc_state *old_state
+			   struct drm_atomic_state *state
			   )
{
	...
}

@@
identifier old_state;
identifier crtc;
@@

 void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
-			   struct drm_crtc_state *old_state
+			   struct drm_atomic_state *state
			   );

@@
identifier old_state;
identifier crtc;
@@

 void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
-			   struct drm_crtc_state *old_state
+			   struct drm_atomic_state *state
			   )
{
	...
}

@@
identifier old_state;
identifier crtc;
@@

 void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
-			   struct drm_crtc_state *old_state
+			   struct drm_atomic_state *state
			   );

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@

void func(struct drm_crtc *crtc,
-	       struct drm_crtc_state *old_state
+	       struct drm_atomic_state *state
	       )
		{ ... }

@ include depends on adds_old_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-11-02 12:37:49 +01:00
Maxime Ripard 29b77ad7b9
drm/atomic: Pass the full state to CRTC atomic_check
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's start convert all the remaining helpers to provide a consistent
interface, starting with the CRTC's atomic_check.

The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.

virtual report

@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier ret, f;
@@

 f(struct drm_device *dev, struct drm_atomic_state *state)
 {
	<...
-	ret = FUNCS->atomic_check(crtc, crtc_state);
+	ret = FUNCS->atomic_check(crtc, state);
	...>
 }

@@
identifier crtc, new_state;
@@

 struct drm_crtc_helper_funcs {
 	...
-	int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state);
+	int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state);
 	...
}

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_check = func,
	...,
};

@ ignores_new_state @
identifier crtc_atomic_func.func;
identifier crtc, new_state;
@@

 int func(struct drm_crtc *crtc,
		struct drm_crtc_state *new_state)
 {
	... when != new_state
 }

@ adds_new_state depends on crtc_atomic_func && !ignores_new_state @
identifier crtc_atomic_func.func;
identifier crtc, new_state;
@@

 int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state)
 {
+	struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
 	...
 }

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@

 int func(...)
 {
	...
-	T state = E;
+	T crtc_state = E;
 	<+...
-	state
+	crtc_state
 	...+>
 }

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@

 int func(...)
 {
 	...
-	T state;
+	T crtc_state;
 	<+...
-	state
+	crtc_state
 	...+>
 }

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier new_state;
identifier crtc;
@@

 int func(struct drm_crtc *crtc,
-	       struct drm_crtc_state *new_state
+	       struct drm_atomic_state *state
	       )
 { ... }

@@
identifier new_state;
identifier crtc;
@@

 int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
-                             struct drm_crtc_state *new_state
+                             struct drm_atomic_state *state
               )
 {
+       struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
	...
 }

@@
identifier new_state;
identifier crtc;
@@

 int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
-                             struct drm_crtc_state *new_state
+                             struct drm_atomic_state *state
               );

@ include depends on adds_new_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-maxime@cerno.tech
2020-11-02 12:34:49 +01:00
Maxime Ripard 351f950db4
drm/atomic: Pass the full state to CRTC atomic enable/disable
If the CRTC driver ever needs to access the full DRM state, it can't do so
at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state
will have cleared the pointer from the struct drm_crtc_state to the struct
drm_atomic_state before calling those hooks.

In order to allow that, let's pass the full DRM state to atomic_enable and
atomic_disable. The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.

virtual report

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@

 disable_outputs(struct drm_device *dev, struct drm_atomic_state *state)
 {
 	<...
-	FUNCS->atomic_disable(crtc, crtc_state);
+	FUNCS->atomic_disable(crtc, state);
 	...>
 }

@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@

 drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state)
 {
 	<...
-	FUNCS->atomic_enable(crtc, crtc_state);
+	FUNCS->atomic_enable(crtc, state);
 	...>
 }

@@
identifier crtc, old_state;
@@

 struct drm_crtc_helper_funcs {
	...
-	void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+	void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
	...
-	void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+	void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
	...
}

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_enable = func,
	...,
};
|
static struct drm_crtc_helper_funcs helpers = {
	...,
	.atomic_disable = func,
	...,
};
)

@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc,
		struct drm_crtc_state *old_state)
{
	... when != old_state
}

@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@

void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+	struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
	...
}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@

void func(...)
{
	...
-	T state = E;
+	T crtc_state = E;
	<+...
-	state
+	crtc_state
	...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@

void func(...)
{
	...
-	T state;
+	T crtc_state;
	<+...
-	state
+	crtc_state
	...+>

}

@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@

void func(struct drm_crtc *crtc,
-	       struct drm_crtc_state *old_state
+	       struct drm_atomic_state *state
	       )
		{ ... }

@ include depends on adds_old_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_old_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-10-09 09:55:59 +02:00
Lyude Paul 1c26b8e090 drm/probe_helper: Add drm_connector_helper_funcs.mode_valid_ctx
This is just an atomic version of mode_valid, which is intended to be
used for situations where a driver might need to check the atomic state
of objects other than the connector itself. One such example is with
MST, where the maximum possible bandwidth on a connector can change
dynamically irregardless of the display configuration.

Changes since v1:
* Use new drm logging functions
* Make some corrections in the mode_valid_ctx kdoc
* Return error codes or 0 from ->mode_valid_ctx() on fail, and store the
  drm_mode_status in an additional function parameter
Changes since v2:
* Don't accidentally assign ret to mode->status on success, or we'll
  squash legitimate mode validation results
* Don't forget to assign MODE_OK to status in drm_connector_mode_valid()
  if we have no callbacks
* Drop leftover hunk in drm_modes.h around enum drm_mode_status
Changes since v3:
* s/return ret/return 0/ in drm_mode_validate_pipeline()
* Minor cleanup in drm_connector_mode_valid()

Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-2-lyude@redhat.com
2020-07-13 13:29:20 -04:00
Sam Ravnborg 21de71f6db drm: writeback: document callbacks
Document the callbacks:
    drm_connector_helper_funcs.prepare_writeback_job
    drm_connector_helper_funcs.cleanup_writeback_job

The documentation was pulled from the changelong introducing the
callbacks, originally written by Laurent.

Adding the missing documentation fixes the following warnings:
drm_modeset_helper_vtables.h:1052: warning: Function parameter or member 'prepare_writeback_job' not described in 'drm_connector_helper_funcs'
drm_modeset_helper_vtables.h:1052: warning: Function parameter or member 'cleanup_writeback_job' not described in 'drm_connector_helper_funcs'

v2:
  - Fix formatting (Daniel)
  - Drop changelog text and add reference (Daniel)
  - Improve grammar. and use "operation" (Laurent)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-3-sam@ravnborg.org
2020-04-07 17:39:01 +02:00
Sam Ravnborg 2f3ba73ae5 drm: drop unused drm_crtc callback
struct drm_encoder_helper_funcs included a callback
named drm_crtc.

There are no users left - so drop it.
There was one reference in drm_crtc_helper.c,
which checked if the value was not NULL.
As it was never assigned this check could be dropped.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200215173342.GA7458@ravnborg.org
2020-02-15 21:15:17 +01:00
Thomas Zimmermann 7fe3f0d15a drm: Add get_vblank_timestamp() to struct drm_crtc_funcs
The callback get_vblank_timestamp() is currently located in struct
drm_driver, but really belongs into struct drm_crtc_funcs. Add an
equivalent there. Driver will be converted in separate patches.

The default implementation is drm_calc_vbltimestamp_from_scanoutpos().
The patch adds drm_crtc_vblank_helper_get_vblank_timestamp(), which is
an implementation for the CRTC callback.

v4:
	* more readable code for setting high_prec (Ville, Jani)
v3:
	* use refactored timestamp calculation to minimize duplicated code
	* do more checks for crtc != NULL to support legacy drivers
v2:
	* rename helper to drm_crtc_vblank_helper_get_vblank_timestamp()
	* replace drm_calc_vbltimestamp_from_scanoutpos() with
	  drm_crtc_vblank_helper_get_vblank_timestamp() in docs

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-4-tzimmermann@suse.de
2020-02-13 13:08:13 +01:00
Thomas Zimmermann f1e2b6371c drm: Add get_scanout_position() to struct drm_crtc_helper_funcs
The new callback get_scanout_position() reads the current location
of the scanout process. The operation is currently located in struct
drm_driver, but really belongs to the CRTC. Drivers will be converted
in separate patches.

To help with the conversion, the timestamp calculation has been
moved from drm_calc_vbltimestamp_from_scanoutpos() to
drm_crtc_vblank_helper_get_vblank_timestamp_internal(). The helper
function supports the new and old interface of get_scanout_position().
drm_calc_vbltimestamp_from_scanoutpos() remains as a wrapper around
the new function.

Callback functions return the scanout position from the CRTC. The
legacy version of the interface receives the device and pipe index,
the modern version receives a pointer to the CRTC. We keep the
legacy version until all drivers have been converted.

v4:
	* 80-character line fixes
v3:
	* refactor drm_calc_vbltimestamp_from_scanoutpos() to minimize
	  code duplication
	* define types for get_scanout_position() callbacks
v2:
	* fix logical op in drm_calc_vbltimestamp_from_scanoutpos()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-3-tzimmermann@suse.de
2020-02-13 13:08:13 +01:00
José Roberto de Souza a92462d6bf drm/connector: Share with non-atomic drivers the function to get the single encoder
This 3 non-atomic drivers all have the same function getting the
only encoder available in the connector, also atomic drivers have
this fallback. So moving it a common place and sharing between atomic
and non-atomic drivers.

While at it I also removed the mention of
drm_atomic_helper_best_encoder() that was renamed in
commit 297e30b5d9 ("drm/atomic-helper: Unexport
drm_atomic_helper_best_encoder").

v3: moving drm_connector_get_single_encoder to drm_kms_helper module

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913232857.389834-1-jose.souza@intel.com
2019-09-16 15:13:02 -07:00
Daniel Vetter 52d2d44eee Linux 5.2-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
 i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
 sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
 1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
 M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
 drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
 N6MC6xA=
 =+B0P
 -----END PGP SIGNATURE-----

Merge v5.2-rc5 into drm-next

Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-06-19 12:07:29 +02:00
Sean Paul 6f3b62781b drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state
Everyone who implements connector_helper_funcs->atomic_check reaches
into the connector state to get the atomic state. Instead of continuing
this pattern, change the callback signature to just give atomic state
and let the driver determine what it does and does not need from it.

Eventually all atomic functions should do this, but that's just too much
busy work for me.

Changes in v3:
- Added to the set
Changes in v4:
- None
Changes in v5:
- intel_digital_connector_atomic_check declaration moved to i915_atomic.h

Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-5-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-5-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-5-sean@poorly.run
2019-06-13 14:30:07 -04:00
Sean Paul 43c76d72ea drm: Add atomic variants of enable/disable to encoder helper funcs
This patch adds atomic_enable and atomic_disable callbacks to the
encoder helpers. This will allow encoders to make informed decisions in
their start-up/shutdown based on the committed state.

Aside from the new hooks, this patch also introduces the new signature
for .atomic_* functions going forward. Instead of passing object state
(well, encoders don't have atomic state, but let's ignore that), we pass
the entire atomic state so the driver can inspect more than what's
happening locally.

This is particularly important for the upcoming self refresh helpers.

Changes in v3:
- Added patch to the set
Changes in v4:
- Move atomic_disable above prepare (Daniel)
- Add breadcrumb to .enable() docbook (Daniel)
Changes in v5:
- None
Changes in v6:
- Tweak kerneldoc some more (Sam)

Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-2-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-2-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611204959.180855-1-sean@poorly.run
2019-06-13 13:00:29 -04:00
Sean Paul 09cc560951 drm: Tweak drm_encoder_helper_funcs.enable kerneldoc
I copied the kerneldoc for encoder_funcs.atomic_enable from encoder_funcs.enable
in a recent patch [1]. Sam rightly pointed out in the review that "for symmetry
with" text is awkward [2]. So here's a patch to fix up the source of the awkward
language.

[1] https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run
[2] https://patchwork.freedesktop.org/patch/msgid/20190611185352.GA16305@ravnborg.org

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612150038.194843-1-sean@poorly.run
2019-06-12 11:19:47 -04:00
Helen Koike 89a4aac0ab drm: don't block fb changes for async plane updates
In the case of a normal sync update, the preparation of framebuffers (be
it calling drm_atomic_helper_prepare_planes() or doing setups with
drm_framebuffer_get()) are performed in the new_state and the respective
cleanups are performed in the old_state.

In the case of async updates, the preparation is also done in the
new_state but the cleanups are done in the new_state (because updates
are performed in place, i.e. in the current state).

The current code blocks async udpates when the fb is changed, turning
async updates into sync updates, slowing down cursor updates and
introducing regressions in igt tests with errors of type:

"CRITICAL: completed 97 cursor updated in a period of 30 flips, we
expect to complete approximately 15360 updates, with the threshold set
at 7680"

Fb changes in async updates were prevented to avoid the following scenario:

- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong)
Where we have a single call to prepare fb2 but double cleanup call to fb2.

To solve the above problems, instead of blocking async fb changes, we
place the old framebuffer in the new_state object, so when the code
performs cleanups in the new_state it will cleanup the old_fb and we
will have the following scenario instead:

- Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2

Where calls to prepare/cleanup are balanced.

Cc: <stable@vger.kernel.org> # v4.14+
Fixes: 25dc194b34 ("drm: Block fb changes for async plane updates")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-6-helen.koike@collabora.com
2019-06-04 10:15:29 +02:00
Dave Airlie f06ddb5309 Linux 5.1-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlyzsYgeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGMw0H/ir42KJiABBKSETD
 0d38qXVclAI/123zl8EkSfDrBKOsuIpXUDxzKeoDMhMkiurMpK6bbEOTPJAQMZJe
 nEYpq/bZQi+vO8Q/pMMpaC3ExlIRosd0JAR7TyDUh5ZAeeMuDNzmvMk/DPxXPbNt
 0P1FWePDa7908ajCOW1T8ZrB9Ak8boo7TKkF3LBb00ks1mEkyp/l74MKOHdu+HYn
 XIwncX/Jotl4BrKdNC2f/NXYLYk6MrJDGug8TxuHgIqiMWhhrcSqbxU1ri7iqFXB
 cBYdFo6ZJ8CWHux8/5LY5CMjSqEtzKha2Ohuhy3MMu1RsICyFLQtHnxHJ1ytLSBt
 DOPcDQ0=
 =CEUD
 -----END PGP SIGNATURE-----

BackMerge v5.1-rc5 into drm-next

Need rc5 for udl fix to add udl cleanups on top.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-15 15:51:49 +10:00
Rodrigo Siqueira fe61692886 drm/atomic-helper: Make atomic_enable/disable crtc callbacks optional
Allow atomic_enable and atomic_disable operations from
drm_crtc_helper_funcs struct optional. With this, the target display
drivers don't need to define a dummy function if they don't need one.

Changes since v2:
* Don't make funcs optional
* Update kerneldoc for atomic_enable/disable
* Replace "if (funcs->atomic_enable)" by "if (funcs->commit)"
* Improve commit message

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190314184845.gjmvkamobj4dilyp@smtp.gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-29 11:56:52 +01:00
Laurent Pinchart 9d2230dc13 drm: writeback: Add job prepare and cleanup operations
As writeback jobs contain a framebuffer, drivers may need to prepare and
cleanup them the same way they can prepare and cleanup framebuffers for
planes. Add two new optional connector helper operations,
.prepare_writeback_job() and .cleanup_writeback_job() to support this.

The job prepare operation is called from
drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper
that would need to be called by all drivers not using
drm_atomic_helper_commit(). The job cleanup operation is called from the
existing drm_writeback_cleanup_job() function, invoked both when
destroying the job as part of a aborted commit, or when the job
completes.

The drm_writeback_job structure is extended with a priv field to let
drivers store per-job data, such as mappings related to the writeback
framebuffer.

For internal plumbing reasons the drm_writeback_job structure needs to
store a back-pointer to the drm_writeback_connector. To avoid pushing
too much writeback-specific knowledge to drm_atomic_uapi.c, create a
drm_writeback_set_fb() function, move the writeback job setup code
there, and set the connector backpointer. The prepare_signaling()
function doesn't need to allocate writeback jobs and can ignore
connectors without a job, as it is called after the writeback jobs are
allocated to store framebuffers, and a writeback fence with a
framebuffer is an invalid configuration that gets rejected by the commit
check.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-03-18 17:24:38 +02:00
Matt Roper 1e55a53a28 drm: Trivial comment grammar cleanups
Most of these are just cases where code comments used contractions
(it's, who's) where they actually mean to use a possessive pronoun (its,
whose) or vice-versa.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202012326.20096-1-matthew.d.roper@intel.com
2019-02-04 10:21:17 +01:00
Daniel Vetter c555f02371 drm: drop _mode_ from update_edit_property()
Just makes it longer, and for most things in drm_connector.[hc] we
just use the drm_connector_ prefix. Done with sed + a bit of manual
fixup for the indenting.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-07-13 18:40:27 +02:00
Boris Brezillon 814bde99ee drm/connector: Make ->atomic_commit() optional
Not all writeback connector implementations might want to commit things
from the connector driver. Some, like the malidp driver, commit things
from their main commit_tail() function, and would rather not have to
implement a dummy hook for drm_connector_helper_funcs.atomic_commit().

Make this function optional and reflect this fact in the doc.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-4-boris.brezillon@bootlin.com
2018-07-07 07:52:18 +02:00
Boris Brezillon 425132fdb1 drm/connector: Pass a drm_connector_state to ->atomic_commit()
Other atomic hooks are passed state objects, let's change this one to
be consistent.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-3-boris.brezillon@bootlin.com
2018-07-07 07:51:56 +02:00
Brian Starkey 935774cd71 drm: Add writeback connector type
Writeback connectors represent writeback engines which can write the
CRTC output to a memory framebuffer. Add a writeback connector type and
related support functions.

Drivers should initialize a writeback connector with
drm_writeback_connector_init() which takes care of setting up all the
writeback-specific details on top of the normal functionality of
drm_connector_init().

Writeback connectors have a WRITEBACK_FB_ID property, used to set the
output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the
supported writeback formats to userspace.

When a framebuffer is attached to a writeback connector with the
WRITEBACK_FB_ID property, it is used only once (for the commit in which
it was included), and userspace can never read back the value of
WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is
attached to a CRTC.

Changes since v1:
 - Added drm_writeback.c + documentation
 - Added helper to initialize writeback connector in one go
 - Added core checks
 - Squashed into a single commit
 - Dropped the client cap
 - Writeback framebuffers are no longer persistent

Changes since v2:
 Daniel Vetter:
 - Subclass drm_connector to drm_writeback_connector
 - Relax check to allow CRTC to be set without an FB
 - Add some writeback_ prefixes
 - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary
 Gustavo Padovan:
 - Add drm_writeback_job to handle writeback signalling centrally

Changes since v3:
 - Rebased
 - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS

Chances since v4:
 - Embed a drm_encoder inside the drm_writeback_connector to
   reduce the amount of boilerplate code required from the drivers
   that are using it.

Changes since v5:
 - Added Rob Clark's atomic_commit() vfunc to connector helper
   funcs, so that writeback jobs are committed from atomic helpers
 - Updated create_writeback_properties() signature to return an
   error code rather than a boolean false for failure.
 - Free writeback job with the connector state rather than when
   doing the cleanup_work()

Changes since v7:
 - fix extraneous use of out_fence that is only introduced in a
   subsequent patch.

Changes since v8:
 - whitespace changes pull from subsequent patch

Changes since v9:
 - Revert the v6 changes that free the writeback job in the connector
   state cleanup and return to doing it in the cleanup_work() function

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[rebased and added atomic_commit() vfunc for writeback jobs]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/229037/
2018-06-20 15:27:49 +01:00
Daniel Vetter 30d23f220c drm/atomic: better doc for implicit vs explicit fencing
Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.

I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.

v2: Comments from Eric.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
2018-04-24 14:01:15 +02:00
Jani Nikula 79436a1c9b drm/edid: make drm_edid_to_eld() static
This is no longer needed outside of drm_edid.c.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c0be7b97d0144ed0419c87ac42b30f5835ca7e6.1509545641.git.jani.nikula@intel.com
2017-11-07 17:43:35 +02:00
Thierry Reding 2093ea2e09 drm/vtables: Fix typo
The callback is named .atomic_check, not .atomc_check.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901144042.6023-1-thierry.reding@gmail.com
2017-09-01 19:50:24 +02:00
Peter Rosin 2cd575aabd drm: remove unused and redundant callbacks
Drivers no longer have any need for these callbacks, and there are no
users. Zap. Zap-zap-zzzap-p-pp-p.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-15-peda@axentia.se
2017-08-07 11:20:36 +02:00
Daniel Vetter c92883a61d drm: Fix kerneldoc for atomic_async_update
The enumeration of FIXMEs wasn't indented properly.

Fixes: fef9df8b59 ("drm/atomic: initial support for asynchronous plane update")
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731111733.10507-1-daniel.vetter@ffwll.ch
2017-07-31 13:58:29 +02:00
Gustavo Padovan fef9df8b59 drm/atomic: initial support for asynchronous plane update
In some cases, like cursor updates, it is interesting to update the
plane in an asynchronous fashion to avoid big delays. The current queued
update could be still waiting for a fence to signal and thus block any
subsequent update until its scan out. In cases like this if we update the
cursor synchronously through the atomic API it will cause significant
delays that would even be noticed by the final user.

This patch creates a fast path to jump ahead the current queued state and
do single planes updates without going through all atomic steps in
drm_atomic_helper_commit(). We take this path for legacy cursor updates.

For now only single plane updates are supported, but we plan to support
multiple planes updates and async PageFlips through this interface as well
in the near future.

v6:	- move check code to drm_atomic_helper.c (Daniel Vetter)

v5:
	- improve comments (Eric Anholt)

v4:
	- fix state->crtc NULL check (Archit Taneja)

v3:
	- fix iteration on the wrong crtc state
	- put back code to forbid updates if there is a queued update for
	the same plane (Ville Syrjälä)
	- move size checks back to drivers (Ville Syrjälä)
	- move ASYNC_UPDATE flag addition to its own patch (Ville Syrjälä)

v2:
	- allow updates even if there is a queued update for the same
	plane.
        - fixes on the documentation (Emil Velikov)
        - unconditionally call ->atomic_async_update (Emil Velikov)
        - check for ->atomic_async_update earlier (Daniel Vetter)
        - make ->atomic_async_check() the last step (Daniel Vetter)
        - add ASYNC_UPDATE flag (Eric Anholt)
        - update state in core after ->atomic_async_update (Eric Anholt)
	- update docs (Eric Anholt)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> (v5)
Acked-by: Eric Anholt <eric@anholt.net> (v5)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630180322.29007-2-gustavo@padovan.org
2017-07-03 10:04:44 +02:00
Laurent Pinchart 0b20a0f8c3 drm: Add old state pointer to CRTC .enable() helper function
The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.

While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
2017-06-30 14:53:14 +02:00
Boris Brezillon 0108648749 drm: Add drm_atomic_helper_wait_for_flip_done()
Add an helper to wait for all page flips of an atomic state to be done.

v2:
- Pimp kerneldoc as discussed with Boris on irc
- Add missing doc for @dev.
- Use old_state for consitency with wait_for_vblanks

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v1)
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1496392332-8722-2-git-send-email-boris.brezillon@free-electrons.com
2017-06-22 15:11:51 +02:00
Daniel Vetter 9f80021473 drm/doc: Clarify mode_fixup vs. atomic_check a bit more
Brought up by both Laurent and Andrzej when reviewing the new
->mode_valid hooks. Since mode_fixup is just a simpler version of the
much more generic atomic_check we can't really unify it with
mode_valid. Most drivers should probably switch their current
mode_fixup code to either the new mode_valid or the atomic_check
hooks, but e.g. that doesn't exist yet for bridges, and for CRTCs the
situation is a bit more complicated. Hence there's no clear
equivalence between mode_fixup and mode_valid, even if it looks like
that at first glance.

v2: Fix accidental double-dot (Adnrzej).

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515091136.26307-2-daniel.vetter@ffwll.ch
2017-05-23 16:36:06 +02:00
Daniel Vetter 9de5d4a61c drm/doc: Document adjusted/request modes a bit better
Laurent started a massive discussion on IRC about this. Let's try to
document common usage a bit better.

v2: Cross-links+typos.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515091136.26307-1-daniel.vetter@ffwll.ch
2017-05-23 16:36:06 +02:00
Jose Abreu 3eb220a531 drm: Add crtc/encoder/bridge->mode_valid() callbacks
This adds a new callback to crtc, encoder and bridge helper functions
called mode_valid(). This callback shall be implemented if the
corresponding component has some sort of restriction in the modes
that can be displayed. A NULL callback implicates that the component
can display all the modes.

We also change the documentation so that the new and old callbacks
are correctly documented.

Only the callbacks were implemented to simplify review process,
following patches will make use of them.

Changes in v2 from Daniel:
- Update the warning about how modes aren't filtered in atomic_check -
  the heleprs help out a lot more now.
- Consistenly roll out that warning, crtc/encoder's atomic_check
  missed it.
- Sprinkle more links all over the place, so it's easier to see where
  this stuff is used and how the differen hooks are related.
- Note that ->mode_valid is optional everywhere.
- Explain why the connector's mode_valid is special and does _not_ get
  called in atomic_check.

v3: Document what can and cannot be checked in mode_valid a bit better
(Andrjez). Answer: Only allowed to look at the mode, nothing else.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Jose Abreu <joabreu@synopsys.com> (v2)
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515093347.31098-1-daniel.vetter@ffwll.ch
2017-05-23 16:36:06 +02:00
Maarten Lankhorst ce09d7667d drm/atomic: Add connector atomic_check function, v2.
The atomic_check function is useful for implementing properties, but
it can be used for other connector modeset related checks as well.

Similar to plane check functions, on a modeset atomic_check() is always
called.

Changes since v1:
- Make sure atomic_check() is called on any modeset.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491477543-31257-5-git-send-email-maarten.lankhorst@linux.intel.com
2017-04-06 17:00:27 -04:00
Maarten Lankhorst 6c5ed5ae35 drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.
mode_valid() called from drm_helper_probe_single_connector_modes()
may need to look at connector->state because what a valid mode is may
depend on connector properties being set. For example some HDMI modes
might be rejected when a connector property forces the connector
into DVI mode.

Some implementations of detect() already lock all state,
so we have to pass an acquire_ctx to them to prevent a deadlock.

This means changing the function signature of detect() slightly,
and passing the acquire_ctx for locking multiple crtc's.
For the callbacks, it will always be non-zero. To allow callers
not to worry about this, drm_helper_probe_detect_ctx is added
which might handle -EDEADLK for you.

Changes since v1:
- Always set ctx parameter.
Changes since v2:
- Always take connection_mutex when probing.
Changes since v3:
- Remove the ctx from intel_dp_long_pulse, and add
  WARN_ON(!connection_mutex) (danvet)
- Update docs to clarify the locking situation. (danvet)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1491504920-4017-1-git-send-email-maarten.lankhorst@linux.intel.com
2017-04-06 21:29:23 +02:00
Daniel Vetter 6806cdf9aa drm/kms-helpers: Use recommened kerneldoc for struct member refs
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

v2: Comments from Gustavo.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
2017-01-25 16:18:57 +01:00