Commit Graph

22 Commits

Author SHA1 Message Date
Thomas Gleixner b4d0d230cc treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public licence as published by
  the free software foundation either version 2 of the licence or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 114 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:11 +02:00
David Howells 436529562d X.509: Allow X.509 certs to be blacklisted
Allow X.509 certs to be blacklisted based on their TBSCertificate hash.
This is convenient since we have to determine this anyway to be able to
check the signature on an X.509 certificate.  This is also what UEFI uses
in its blacklist.

If a certificate built into the kernel is blacklisted, something like the
following might then be seen during boot:

	X.509: Cert 123412341234c55c1dcc601ab8e172917706aa32fb5eaf826813547fdf02dd46 is blacklisted
	Problem loading in-kernel X.509 certificate (-129)

where the hex string shown is the blacklisted hash.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-03 16:07:25 +01:00
David Howells a511e1af8b KEYS: Move the point of trust determination to __key_link()
Move the point at which a key is determined to be trustworthy to
__key_link() so that we use the contents of the keyring being linked in to
to determine whether the key being linked in is trusted or not.

What is 'trusted' then becomes a matter of what's in the keyring.

Currently, the test is done when the key is parsed, but given that at that
point we can only sensibly refer to the contents of the system trusted
keyring, we can only use that as the basis for working out the
trustworthiness of a new key.

With this change, a trusted keyring is a set of keys that once the
trusted-only flag is set cannot be added to except by verification through
one of the contained keys.

Further, adding a key into a trusted keyring, whilst it might grant
trustworthiness in the context of that keyring, does not automatically
grant trustworthiness in the context of a second keyring to which it could
be secondarily linked.

To accomplish this, the authentication data associated with the key source
must now be retained.  For an X.509 cert, this means the contents of the
AuthorityKeyIdentifier and the signature data.


If system keyrings are disabled then restrict_link_by_builtin_trusted()
resolves to restrict_link_reject().  The integrity digital signature code
still works correctly with this as it was previously using
KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there
is no system keyring against which trust can be determined.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11 22:43:43 +01:00
David Howells cfb664ff2b X.509: Move the trust validation code out to its own file
Move the X.509 trust validation code out to its own file so that it can be
generalised.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11 22:42:55 +01:00
David Howells bda850cd21 PKCS#7: Make trust determination dependent on contents of trust keyring
Make the determination of the trustworthiness of a key dependent on whether
a key that can verify it is present in the supplied ring of trusted keys
rather than whether or not the verifying key has KEY_FLAG_TRUSTED set.

verify_pkcs7_signature() will return -ENOKEY if the PKCS#7 message trust
chain cannot be verified.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 16:14:24 +01:00
David Howells 6c2dc5ae4a X.509: Extract signature digest and make self-signed cert checks earlier
Extract the signature digest for an X.509 certificate earlier, at the end
of x509_cert_parse() rather than leaving it to the callers thereof since it
has to be called anyway.

Further, immediately after that, check the signature on self-signed
certificates, also rather in the callers of x509_cert_parse().

We note in the x509_certificate struct the following bits of information:

 (1) Whether the signature is self-signed (even if we can't check the
     signature due to missing crypto).

 (2) Whether the key held in the certificate needs unsupported crypto to be
     used.  We may get a PKCS#7 message with X.509 certs that we can't make
     use of - we just ignore them and give ENOPKG at the end it we couldn't
     verify anything if at least one of these unusable certs are in the
     chain of trust.

 (3) Whether the signature held in the certificate needs unsupported crypto
     to be checked.  We can still use the key held in this certificate,
     even if we can't check the signature on it - if it is held in the
     system trusted keyring, for instance.  We just can't add it to a ring
     of trusted keys or follow it further up the chain of trust.

Making these checks earlier allows x509_check_signature() to be removed and
replaced with direct calls to public_key_verify_signature().

Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 16:13:34 +01:00
David Howells 77d0910d15 X.509: Retain the key verification data
Retain the key verification data (ie. the struct public_key_signature)
including the digest and the key identifiers.

Note that this means that we need to take a separate copy of the digest in
x509_get_sig_params() rather than lumping it in with the crypto layer data.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 16:13:33 +01:00
David Howells 146aa8b145 KEYS: Merge the type-specific data with the payload data
Merge the type-specific data with the payload data into one four-word chunk
as it seems pointless to keep them separate.

Use user_key_payload() for accessing the payloads of overloaded
user-defined keys.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org
cc: ecryptfs@vger.kernel.org
cc: linux-ext4@vger.kernel.org
cc: linux-f2fs-devel@lists.sourceforge.net
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-ima-devel@lists.sourceforge.net
2015-10-21 15:18:36 +01:00
David Howells fd19a3d195 PKCS#7: Improve and export the X.509 ASN.1 time object decoder
Make the X.509 ASN.1 time object decoder fill in a time64_t rather than a
struct tm to make comparison easier (unfortunately, this makes readable
display less easy) and export it so that it can be used by the PKCS#7 code
too.

Further, tighten up its parsing to reject invalid dates (eg. weird
characters, non-existent hour numbers) and unsupported dates (eg. timezones
other than 'Z' or dates earlier than 1970).

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells b92e6570a9 X.509: Extract both parts of the AuthorityKeyIdentifier
Extract both parts of the AuthorityKeyIdentifier, not just the keyIdentifier,
as the second part can be used to match X.509 certificates by issuer and
serialNumber.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07 16:26:13 +01:00
Dmitry Kasatkin 8dd609805b KEYS: use swapped SKID for performing partial matching
Earlier KEYS code used pure subject key identifiers (fingerprint)
for searching keys. Latest merged code removed that and broke
compatibility with integrity subsytem signatures and original
format of module signatures.

This patch returns back partial matching on SKID.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 16:56:08 +01:00
David Howells dd2f6c4481 X.509: If available, use the raw subjKeyId to form the key description
Module signing matches keys by comparing against the key description exactly.
However, the way the key description gets constructed got changed to be
composed of the subject name plus the certificate serial number instead of the
subject name and the subjectKeyId.  I changed this to avoid problems with
certificates that don't *have* a subjectKeyId.

Instead, if available, use the raw subjectKeyId to form the key description
and only use the serial number if the subjectKeyId doesn't exist.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-03 16:17:02 +01:00
David Howells 4155942000 PKCS#7: Better handling of unsupported crypto
Provide better handling of unsupported crypto when verifying a PKCS#7 message.
If we can't bridge the gap between a pair of X.509 certs or between a signed
info block and an X.509 cert because it involves some crypto we don't support,
that's not necessarily the end of the world as there may be other ways points
at which we can intersect with a ring of trusted keys.

Instead, only produce ENOPKG immediately if all the signed info blocks in a
PKCS#7 message require unsupported crypto to bridge to the first X.509 cert.
Otherwise, we defer the generation of ENOPKG until we get ENOKEY during trust
validation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:15 +01:00
David Howells 46963b774d KEYS: Overhaul key identification when searching for asymmetric keys
Make use of the new match string preparsing to overhaul key identification
when searching for asymmetric keys.  The following changes are made:

 (1) Use the previously created asymmetric_key_id struct to hold the following
     key IDs derived from the X.509 certificate or PKCS#7 message:

	id: serial number + issuer
	skid: subjKeyId + subject
	authority: authKeyId + issuer

 (2) Replace the hex fingerprint attached to key->type_data[1] with an
     asymmetric_key_ids struct containing the id and the skid (if present).

 (3) Make the asymmetric_type match data preparse select one of two searches:

     (a) An iterative search for the key ID given if prefixed with "id:".  The
     	 prefix is expected to be followed by a hex string giving the ID to
     	 search for.  The criterion key ID is checked against all key IDs
     	 recorded on the key.

     (b) A direct search if the key ID is not prefixed with "id:".  This will
     	 look for an exact match on the key description.

 (4) Make x509_request_asymmetric_key() take a key ID.  This is then converted
     into "id:<hex>" and passed into keyring_search() where match preparsing
     will turn it back into a binary ID.

 (5) X.509 certificate verification then takes the authority key ID and looks
     up a key that matches it to find the public key for the certificate
     signature.

 (6) PKCS#7 certificate verification then takes the id key ID and looks up a
     key that matches it to find the public key for the signed information
     block signature.

Additional changes:

 (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the
     cert to be rejected with -EBADMSG.

 (2) The 'fingerprint' ID is gone.  This was primarily intended to convey PGP
     public key fingerprints.  If PGP is supported in future, this should
     generate a key ID that carries the fingerprint.

 (3) Th ca_keyid= kernel command line option is now converted to a key ID and
     used to match the authority key ID.  Possibly this should only match the
     actual authKeyId part and not the issuer as well.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:13 +01:00
David Howells 84aabd46bf X.509: Add bits needed for PKCS#7
PKCS#7 validation requires access to the serial number and the raw names in an
X.509 certificate.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
2014-07-01 16:40:19 +01:00
Dmitry Kasatkin c7c8bb237f ima: provide support for arbitrary hash algorithms
In preparation of supporting more hash algorithms with larger hash sizes
needed for signature verification, this patch replaces the 20 byte sized
digest, with a more flexible structure.  The new structure includes the
hash algorithm, digest size, and digest.

Changelog:
- recalculate filedata hash for the measurement list, if the signature
  hash digest size is greater than 20 bytes.
- use generic HASH_ALGO_
- make ima_calc_file_hash static
- scripts lindent and checkpatch fixes

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:16:58 -04:00
Dmitry Kasatkin 3fe78ca2fb keys: change asymmetric keys to use common hash definitions
This patch makes use of the newly defined common hash algorithm info,
replacing, for example, PKEY_HASH with HASH_ALGO.

Changelog:
- Lindent fixes - Mimi

CC: David Howells <dhowells@redhat.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:15:18 -04:00
David Howells b426beb6ee X.509: Embed public_key_signature struct and create filler function
Embed a public_key_signature struct in struct x509_certificate, eliminating
now unnecessary fields, and split x509_check_signature() to create a filler
function for it that attaches a digest of the signed data and an MPI that
represents the signature data.  x509_free_certificate() is then modified to
deal with these.

Whilst we're at it, export both x509_check_signature() and the new
x509_get_sig_params().

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
2013-09-25 17:17:00 +01:00
David Howells 57be4a784b X.509: struct x509_certificate needs struct tm declaring
struct x509_certificate needs struct tm declaring by #inclusion of linux/time.h
prior to its definition.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
2013-09-25 17:17:00 +01:00
David Howells 67f7d60b3a KEYS: Store public key algo ID in public_key struct
Store public key algo ID in public_key struct for reference purposes.  This
allows it to be removed from the x509_certificate struct and used to find a
default in public_key_verify_signature().

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
2013-09-25 17:17:00 +01:00
David Howells a5752d11b3 MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
The current choice of lifetime for the autogenerated X.509 of 100 years,
putting the validTo date in 2112, causes problems on 32-bit systems where a
32-bit time_t wraps in 2106.  64-bit x86_64 systems seem to be unaffected.

This can result in something like:

	Loading module verification certificates
	X.509: Cert 6e03943da0f3b015ba6ed7f5e0cac4fe48680994 has expired
	MODSIGN: Problem loading in-kernel X.509 certificate (-127)

Or:

	X.509: Cert 6e03943da0f3b015ba6ed7f5e0cac4fe48680994 is not yet valid
	MODSIGN: Problem loading in-kernel X.509 certificate (-129)

Instead of turning the dates into time_t values and comparing, turn the system
clock and the ASN.1 dates into tm structs and compare those piecemeal instead.

Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-10 20:06:37 +10:30
David Howells c26fd69fa0 X.509: Add a crypto key parser for binary (DER) X.509 certificates
Add a crypto key parser for binary (DER) encoded X.509 certificates.  The
certificate is parsed and, if possible, the signature is verified.

An X.509 key can be added like this:

	# keyctl padd crypto bar @s </tmp/x509.cert
	15768135

and displayed like this:

	# cat /proc/keys
	00f09a47 I--Q---     1 perm 39390000     0     0 asymmetri bar: X509.RSA e9fd6d08 []

Note that this only works with binary certificates.  PEM encoded certificates
are ignored by the parser.

Note also that the X.509 key ID is not congruent with the PGP key ID, but for
the moment, they will match.

If a NULL or "" name is given to add_key(), then the parser will generate a key
description from the CertificateSerialNumber and Name fields of the
TBSCertificate:

	00aefc4e I--Q---     1 perm 39390000     0     0 asymmetri bfbc0cd76d050ea4:/C=GB/L=Cambridge/O=Red Hat/CN=kernel key: X509.RSA 0c688c7b []

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-08 13:50:22 +10:30