Commit graph

396 commits

Author SHA1 Message Date
Loc Ho
b8a28251c2 [CRYPTO] cryptd: Add asynchronous hash support
This patch adds asynchronous hash support to crypto daemon.

Signed-off-by: Loc Ho <lho@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:14 +08:00
Loc Ho
004a403c2e [CRYPTO] hash: Add asynchronous hash support
This patch adds asynchronous hash and digest support.

Signed-off-by: Loc Ho <lho@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:13 +08:00
Adrian-Ken Rueegsegger
534fe2c1c3 [CRYPTO] ripemd: Add Kconfig entries for extended RIPEMD hash algorithms
This patch adds Kconfig entries for RIPEMD-256 and RIPEMD-320.

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:13 +08:00
Adrian-Ken Rueegsegger
2998db37b5 [CRYPTO] tcrypt: Add test vectors for RIPEMD-256 and RIPEMD-320
This patch adds test vectors for RIPEMD-256 and
RIPEMD-320 hash algorithms.

The test vectors are taken from
<http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:13 +08:00
Adrian-Ken Rueegsegger
c555c28d9d [CRYPTO] ripemd: Add support for RIPEMD-256 and RIPEMD-320
This patch adds support for the extended RIPEMD hash
algorithms RIPEMD-256 and RIPEMD-320.

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:13 +08:00
Adrian-Ken Rueegsegger
ba6b039872 [CRYPTO] ripemd: Put all common RIPEMD values in header file
This patch puts all common RIPEMD values in the
appropriate header file. Initial values and constants
are the same for all variants of RIPEMD.

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:12 +08:00
Patrick McHardy
a558f1d4f8 [CRYPTO] tcrypt: Catch cipher destination memory corruption
Check whether the destination buffer is written to beyond the last
byte contained in the scatterlist.
    
Also change IDX1 of the cross-page access offsets to a multiple of 4.
This triggers a corruption in the HIFN driver and doesn't seem to
negatively impact other testcases.
    
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:12 +08:00
Herbert Xu
b10c170638 [CRYPTO] tcrpyt: Get rid of change log in source
Change logs should be kept in source control systems, not the source.
This patch removes the change log from tcrpyt to stop people from
extending it any more.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:10 +08:00
Adrian-Ken Rueegsegger
82798f90fb [CRYPTO] ripemd: Add Kconfig entries for RIPEMD hash algorithms
This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160.

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:10 +08:00
Adrian-Ken Rueegsegger
fd4adf1a0b [CRYPTO] tcrypt: Add test vectors for RIPEMD-128 and RIPEMD-160
This patch adds test vectors for RIPEMD-128 and
RIPEMD-160 hash algorithms and digests (HMAC).

The test vectors are taken from ISO:IEC 10118-3 (2004)
and RFC2286.

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:10 +08:00
Adrian-Ken Rueegsegger
c6580eb8b1 [CRYPTO] ripemd: Add support for RIPEMD hash algorithms
This patch adds support for RIPEMD-128 and RIPEMD-160
hash algorithms.

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:09 +08:00
Herbert Xu
93aa7f8a12 [CRYPTO] cryptd: Fix EINPROGRESS notification context
The EINPROGRESS notifications should be done just like the final
call-backs, i.e., with BH off.  This patch fixes the call in cryptd
since previously it was called with BH on.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:35:09 +08:00
Herbert Xu
872ac8743c crypto: chainiv - Invoke completion function
When chainiv postpones requests it never calls their completion functions.
This causes symptoms such as memory leaks when IPsec is in use.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10 20:34:38 +08:00
Dan Williams
65bc3ffe8c async_tx: fix async_memset compile error
commit 636bdeaa 'dmaengine: ack to flags: make use of the unused bits in
the 'ack' field' missed an ->ack conversion in
crypto/async_tx/async_memset.c

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 11:57:55 -07:00
Darren Jenkins
dbb018cd8a crypto: tcrypt - Fix memory leak in test_cipher
Coverity CID: 2306 & 2307 RESOURCE_LEAK

In the second for loop in test_cipher(), data is allocated space with
kzalloc() and is only ever freed in an error case.
Looking at this loop, data is written to this memory but nothing seems
to read from it. 
So here is a patch removing the allocation, I think this is the right
fix.

Only compile tested.

Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-08 15:51:44 +08:00
Ingo Molnar
766d02786e Merge branch 'linus' into core/rcu 2008-06-16 11:23:36 +02:00
Alexey Dobriyan
c4913c7b71 [CRYPTO] cts: Init SG tables
Steps to reproduce:

	modprobe tcrypt		# with CONFIG_DEBUG_SG=y

testing cts(cbc(aes)) encryption
test 1 (128 bit key):
------------[ cut here ]------------
kernel BUG at include/linux/scatterlist.h:65!
invalid opcode: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC
CPU 0 
Modules linked in: tea xts twofish twofish_common tcrypt(+) [maaaany]
Pid: 16151, comm: modprobe Not tainted 2.6.26-rc4-fat #7
RIP: 0010:[<ffffffffa0bf032e>]  [<ffffffffa0bf032e>] :cts:cts_cbc_encrypt+0x151/0x355
RSP: 0018:ffff81016f497a88  EFLAGS: 00010286
RAX: ffffe20009535d58 RBX: ffff81016f497af0 RCX: 0000000087654321
RDX: ffff8100010d4f28 RSI: ffff81016f497ee8 RDI: ffff81016f497ac0
RBP: ffff81016f497c38 R08: 0000000000000000 R09: 0000000000000011
R10: ffffffff00000008 R11: ffff8100010d4f28 R12: ffff81016f497ac0
R13: ffff81016f497b30 R14: 0000000000000010 R15: 0000000000000010
FS:  00007fac6fa276f0(0000) GS:ffffffff8060e000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f12ca7cc000 CR3: 000000016f441000 CR4: 00000000000026e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
Process modprobe (pid: 16151, threadinfo ffff81016f496000, task ffff8101755b4ae0)
Stack:  0000000000000001 ffff81016f496000 ffffffff80719f78 0000000000000001
 0000000000000001 ffffffff8020c87c ffff81016f99c918 20646c756f772049
 65687420656b696c 0000000000000020 0000000000000000 0000000033341102
Call Trace:
 [<ffffffff8020c87c>] ? restore_args+0x0/0x30
 [<ffffffffa04aa311>] ? :aes_generic:crypto_aes_expand_key+0x311/0x369
 [<ffffffff802ab453>] ? check_object+0x15a/0x213
 [<ffffffff802aad22>] ? init_object+0x6e/0x76
 [<ffffffff802ac3ae>] ? __slab_free+0xfc/0x371
 [<ffffffffa0bf05ed>] :cts:crypto_cts_encrypt+0xbb/0xca
 [<ffffffffa07108de>] ? :crypto_blkcipher:setkey+0xc7/0xec
 [<ffffffffa07110b8>] :crypto_blkcipher:async_encrypt+0x38/0x3a
 [<ffffffffa2ce9341>] :tcrypt:test_cipher+0x261/0x7c6
 [<ffffffffa2cfd9df>] :tcrypt:tcrypt_mod_init+0x9df/0x1b30
 [<ffffffff80261e35>] sys_init_module+0x9e/0x1b2
 [<ffffffff8020c15a>] system_call_after_swapgs+0x8a/0x8f
Code: 45 c0 e8 aa 24 63 df 48 c1 e8 0c 48 b9 00 00 00 00 00 e2 ff ff 48 8b 55 88 48 6b c0 68 48 01 c8 b9 21 43 65 87 48 39 4d 80 74 04 <0f> 0b eb fe f6 c2 01 74 04 0f 0b eb fe 83 e2 03 4c 89 ef 44 89 
RIP  [<ffffffffa0bf032e>] :cts:cts_cbc_encrypt+0x151/0x355
 RSP <ffff81016f497a88>
---[ end trace e8bahiarjand37fd ]---

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-06-02 15:46:51 +10:00
Franck Bui-Huu
82524746c2 rcu: split list.h and move rcu-protected lists into rculist.h
Move rcu-protected lists from list.h into a new header file rculist.h.

This is done because list are a very used primitive structure all over the
kernel and it's currently impossible to include other header files in this
list.h without creating some circular dependencies.

For example, list.h implements rcu-protected list and uses rcu_dereference()
without including rcupdate.h.  It actually compiles because users of
rcu_dereference() are macros.  Others RCU functions could be used too but
aren't probably because of this.

Therefore this patch creates rculist.h which includes rcupdates without to
many changes/troubles.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Josh Triplett <josh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-19 10:01:37 +02:00
Herbert Xu
67412f0e78 [CRYPTO] hmac: Avoid calling virt_to_page on key
When HMAC gets a key longer than the block size of the hash, it needs
to feed it as input to the hash to reduce it to a fixed length.  As
it is HMAC converts the key to a scatter and gather list.  However,
this doesn't work on certain platforms if the key is not allocated
via kmalloc.  For example, the keys from tcrypt are stored in the
rodata section and this causes it to fail with HMAC on x86-64.

This patch fixes this by copying the key to memory obtained via
kmalloc before hashing it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-07 21:08:56 +08:00
Julia Lawall
b1145ce395 [CRYPTO] cryptd: Correct kzalloc error test
Normally, kzalloc returns NULL or a valid pointer value, not a value to be
tested using IS_ERR.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-01 18:22:28 +08:00
Herbert Xu
46f8153cc5 [CRYPTO] eseqiv: Fix off-by-one encryption
After attaching the IV to the head during encryption, eseqiv does not
increase the encryption length by that amount.  As such the last block
of the actual plain text will be left unencrypted.

Fortunately the only user of this code hifn currently crashes so this
shouldn't affect anyone :)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-01 18:22:28 +08:00
Patrick McHardy
161613293f [CRYPTO] authenc: Fix async crypto crash in crypto_authenc_genicv()
crypto_authenc_givencrypt_done uses req->data as struct aead_givcrypt_request,
while it really points to a struct aead_request, causing this crash:

BUG: unable to handle kernel paging request at 6b6b6b6b
IP: [<dc87517b>] :authenc:crypto_authenc_genicv+0x23/0x109
*pde = 00000000
Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
Modules linked in: hifn_795x authenc esp4 aead xfrm4_mode_tunnel sha1_generic hmac crypto_hash]

Pid: 3074, comm: ping Not tainted (2.6.25 #4)
EIP: 0060:[<dc87517b>] EFLAGS: 00010296 CPU: 0
EIP is at crypto_authenc_genicv+0x23/0x109 [authenc]
EAX: daa04690 EBX: daa046e0 ECX: dab0a100 EDX: daa046b0
ESI: 6b6b6b6b EDI: dc872054 EBP: c033ff60 ESP: c033ff0c
 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process ping (pid: 3074, ti=c033f000 task=db883a80 task.ti=dab6c000)
Stack: 00000000 daa046b0 c0215a3e daa04690 dab0a100 00000000 ffffffff db9fd7f0
       dba208c0 dbbb1720 00000001 daa04720 00000001 c033ff54 c0119ca9 dc852a75
       c033ff60 c033ff60 daa046e0 00000000 00000001 c033ff6c dc87527b 00000001
Call Trace:
 [<c0215a3e>] ? dev_alloc_skb+0x14/0x29
 [<c0119ca9>] ? printk+0x15/0x17
 [<dc87527b>] ? crypto_authenc_givencrypt_done+0x1a/0x27 [authenc]
 [<dc850cca>] ? hifn_process_ready+0x34a/0x352 [hifn_795x]
 [<dc8353c7>] ? rhine_napipoll+0x3f2/0x3fd [via_rhine]
 [<dc851a56>] ? hifn_check_for_completion+0x4d/0xa6 [hifn_795x]
 [<dc851ab9>] ? hifn_tasklet_callback+0xa/0xc [hifn_795x]
 [<c011d046>] ? tasklet_action+0x3f/0x66
 [<c011d230>] ? __do_softirq+0x38/0x7a
 [<c0105a5f>] ? do_softirq+0x3e/0x71
 [<c011d17c>] ? irq_exit+0x2c/0x65
 [<c010e0c0>] ? smp_apic_timer_interrupt+0x5f/0x6a
 [<c01042e4>] ? apic_timer_interrupt+0x28/0x30
 [<dc851640>] ? hifn_handle_req+0x44a/0x50d [hifn_795x]
 ...

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-01 18:22:28 +08:00
Sebastian Siewior
584fffc8b1 [CRYPTO] kconfig: Ordering cleanup
Ciphers, block modes, name it, are grouped together and sorted.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:34 +08:00
Kamalesh Babulal
3af5b90bde [CRYPTO] all: Clean up init()/fini()
On Thu, Mar 27, 2008 at 03:40:36PM +0100, Bodo Eggert wrote:
> Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> 
> > This patch cleanups the crypto code, replaces the init() and fini()
> > with the <algorithm name>_init/_fini
> 
> This part ist OK.
> 
> > or init/fini_<algorithm name> (if the 
> > <algorithm name>_init/_fini exist)
> 
> Having init_foo and foo_init won't be a good thing, will it? I'd start
> confusing them.
> 
> What about foo_modinit instead?

Thanks for the suggestion, the init() is replaced with

	<algorithm name>_mod_init ()

and fini () is replaced with <algorithm name>_mod_fini.
 
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:34 +08:00
Sebastian Siewior
5427663f49 [CRYPTO] aes: Export generic setkey
The key expansion routine could be get little more generic, become
a kernel doc entry and then get exported.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Tested-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:34 +08:00
Sebastian Siewior
c3715cb90f [CRYPTO] api: Make the crypto subsystem fully modular
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:23 +08:00
Kevin Coffman
76cb952179 [CRYPTO] cts: Add CTS mode required for Kerberos AES support
Implement CTS wrapper for CBC mode required for support of AES
encryption support for Kerberos (rfc3962).

Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:23 +08:00
Marcin Slusarz
fd4609a8e0 [CRYPTO] lrw: Replace all adds to big endians variables with be*_add_cpu
replace all:
big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) +
					expression_in_cpu_byteorder);
with:
	beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder);

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:22 +08:00
Sebastian Siewior
f0df30b1f7 [CRYPTO] tcrypt: Change the XTEA test vectors
The third test vector of ECB-XTEA-ENC fails for me all other
are fine. I could not find a RFC or something else where they
are defined. The test vector has not been modified since git
started recording histrory. The implementation is very close
(not to say equal) to what is available as Public Domain (they
recommend 64 rounds and the in kernel uses 32). Therefore I
belive that there is typo somewhere and tcrypt reported always
*fail* instead of *okey*.
This patch replaces input + result of the third test vector with
result + input from the third decryption vector. The key is the
same, the other three test vectors are also the reverse.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:22 +08:00
Sebastian Siewior
de224c309b [CRYPTO] tcrypt: Shrink the tcrypt module
Currently the tcrypt module is about 2 MiB on x86-32. The
main reason for the huge size is the data segment which contains
all the test vectors for each algorithm. The test vectors are
staticly allocated in an array and the size of the array has been
drastically increased by the merge of the Salsa20 test vectors.

With a hint from Benedigt Spranger I found a way how I could
convert those fixed-length arrays to strings which are flexible
in size. VIM and regex were also very helpfull :)
So, I am talking about a shrinking of ~97% on x86-32:

   text    data     bss     dec     hex filename
  18309 2039708      20 2058037  1f6735 tcrypt-b4.ko
  45628   23516      80   69224   10e68 tcrypt.ko

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:22 +08:00
Sebastian Siewior
562954d5e0 [CRYPTO] tcrypt: Change the usage of the test vectors
The test routines (test_{cipher,hash,aead}) are makeing a copy
of the test template and are processing the encryption process
in place. This patch changes the creation of the copy so it will
work even if the source address of the input data isn't an array
inside of the template but a pointer.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:22 +08:00
Jan Engelhardt
48c8949ea8 [CRYPTO] api: Constify function pointer tables
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:22 +08:00
Sebastian Siewior
d5dc392742 [CRYPTO] tcrypt: Shrink speed templates
The speed templates as it look always the same. The key size
is repeated for each block size and we test always the same
block size. The addition of one inner loop makes it possible
to get rid of the struct and it is possible to use a tiny
u8 array :)

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:21 +08:00
Sebastian Siewior
477035c2ab [CRYPTO] tcrypt: Group common speed templates
Some crypto ciphers which are impleneted support similar key sizes
(16,24 & 32 byte). They can be grouped together and use a common
templatte instead of their own which contains the same data.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:21 +08:00
Jan Glauber
78f8b3a240 [CRYPTO] sha512: Rename sha512 to sha512_generic
Rename sha512 to sha512_generic and add a MODULE_ALIAS for sha512
so all sha512 implementations can be loaded automatically.

Keep the broken tabs so git recognizes this as a rename.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:19:21 +08:00
Alexey Dobriyan
607424d858 [CRYPTO] api: Switch to proc_create()
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21 10:15:56 +08:00
Dan Williams
636bdeaa12 dmaengine: ack to flags: make use of the unused bits in the 'ack' field
'ack' is currently a simple integer that flags whether or not a client is done
touching fields in the given descriptor.  It is effectively just a single bit
of information.  Converting this to a flags parameter allows the other bits to
be put to use to control completion actions, like dma-unmap, and capture
results, like xor-zero-sum == 0.

Changes are one of:
1/ convert all open-coded ->ack manipulations to use async_tx_ack
   and async_tx_test_ack.
2/ set the ack bit at prep time where possible
3/ make drivers store the flags at prep time
4/ add flags to the device_prep_dma_interrupt prototype

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-04-17 13:25:54 -07:00
Dan Williams
19242d7233 async_tx: fix multiple dependency submission
Shrink struct dma_async_tx_descriptor and introduce
async_tx_channel_switch to properly inject a channel switch interrupt in
the descriptor stream.  This simplifies the locking model as drivers no
longer need to handle dma_async_tx_descriptor.lock.

Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-04-17 13:25:05 -07:00
Joy Latten
1edcf2e1ee [CRYPTO] xcbc: Fix crash when ipsec uses xcbc-mac with big data chunk
The kernel crashes when ipsec passes a udp packet of about 14XX bytes
of data to aes-xcbc-mac.

It seems the first xxxx bytes of the data are in first sg entry,
and remaining xx bytes are in next sg entry. But we don't 
check next sg entry to see if we need to go look the page up.

I noticed in hmac.c, we do a scatterwalk_sg_next(), to do this check
and possible lookup, thus xcbc.c needs to use this routine too.

A 15-hour run of an ipsec stress test sending streams of tcp and
udp packets of various sizes,  using this patch and 
aes-xcbc-mac completed successfully, so hopefully this fixes the
problem.
 
Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-02 14:36:09 +08:00
Dan Williams
8d8002f642 async_tx: avoid the async xor_zero_sum path when src_cnt > device->max_xor
If the channel cannot perform the operation in one call to
->device_prep_dma_zero_sum, then fallback to the xor+page_is_zero path.
This only affects users with arrays larger than 16 devices on iop13xx or
32 devices on iop3xx.

Cc: <stable@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-18 17:01:00 -07:00
Dan Williams
3280ab3e88 async_tx: checkpatch says s/__FUNCTION__/__func__/g
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-13 10:57:10 -07:00
Herbert Xu
f13ba2f7d3 [CRYPTO] skcipher: Fix section mismatches
The previous patch to move chainiv and eseqiv into blkcipher created
a section mismatch for the chainiv exit function which was also called
from __init.  This patch removes the __exit marking on it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-03-08 20:29:43 +08:00
Joy Latten
2f40a178e7 [CRYPTO] xcbc: Fix crash with IPsec
When using aes-xcbc-mac for authentication in IPsec, 
the kernel crashes. It seems this algorithm doesn't 
account for the space IPsec may make in scatterlist for authtag.
Thus when crypto_xcbc_digest_update2() gets called,
nbytes may be less than sg[i].length. 
Since nbytes is an unsigned number, it wraps
at the end of the loop allowing us to go back 
into loop and causing crash in memcpy.

I used update function in digest.c to model this fix.
Please let me know if it looks ok.

Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-03-06 19:28:44 +08:00
Sebastian Siewior
6212f2c7f7 [CRYPTO] xts: Use proper alignment
The XTS blockmode uses a copy of the IV which is saved on the stack
and may or may not be properly aligned. If it is not, it will break
hardware cipher like the geode or padlock.
This patch encrypts the IV in place so we don't have to worry about
alignment.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Tested-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-03-06 18:56:19 +08:00
Adrian Bunk
bc97f19dc8 [CRYPTO] digest: Include internal.h for prototypes
Every file should include the headers containing the externs for its 
global code (in this case for struct crypto_{init,exit}_digest_ops()).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-03-05 19:05:54 +08:00
Herbert Xu
3e16bfbaf3 [CRYPTO] authenc: Add missing Kconfig dependency on BLKCIPHER
The authenc algorithm requires BLKCIPHER to be present.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-02-23 11:13:00 +08:00
Herbert Xu
76fc60a2e3 [CRYPTO] skcipher: Move chainiv/seqiv into crypto_blkcipher module
For compatibility with dm-crypt initramfs setups it is useful to merge
chainiv/seqiv into the crypto_blkcipher module.  Since they're required
by most algorithms anyway this is an acceptable trade-off.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-02-23 11:12:06 +08:00
Adrian Bunk
c8620c2590 [CRYPTO] null: Add missing Kconfig dependency on BLKCIPHER
This patch fixes the following build error caused by commit 
3631c650c4:

<--  snip  -->

...
  LD      .tmp_vmlinux1
crypto/built-in.o: In function `skcipher_null_crypt':
crypto_null.c:(.text+0x3d14): undefined reference to `blkcipher_walk_virt'
crypto_null.c:(.text+0x3d14): relocation truncated to fit: R_MIPS_26 against `blkcipher_walk_virt'
crypto/built-in.o: In function `$L32':
crypto_null.c:(.text+0x3d54): undefined reference to `blkcipher_walk_done'
crypto_null.c:(.text+0x3d54): relocation truncated to fit: R_MIPS_26 against `blkcipher_walk_done'
crypto/built-in.o:(.data+0x2e8): undefined reference to `crypto_blkcipher_type'
make[1]: *** [.tmp_vmlinux1] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-02-18 09:00:05 +08:00
Frederik Deweerdt
242f1a3437 [CRYPTO] tcrypt: Add missing Kconfig dependency on BLKCIPHER
Building latest git fails with the following error:
	ERROR: "crypto_alloc_ablkcipher" [crypto/tcrypt.ko] undefined!
This appears to happen because CONFIG_CRYPTO_TEST is set while
CONFIG_CRYPTO_BLKCIPHER is not.
The following patch fixes the problem for me.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-02-15 19:19:33 +08:00
David Howells
e231c2ee64 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)
Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using:

perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security`

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:26 -08:00
Dan Williams
47437b2c9a async_tx: allow architecture specific async_tx_find_channel implementations
The source and destination addresses are included to allow channel
selection based on address alignment.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-06 10:12:18 -07:00
Dan Williams
d4c56f97ff async_tx: replace 'int_en' with operation preparation flags
Pass a full set of flags to drivers' per-operation 'prep' routines.
Currently the only flag passed is DMA_PREP_INTERRUPT.  The expectation is
that arch-specific async_tx_find_channel() implementations can exploit this
capability to find the best channel for an operation.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Reviewed-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-06 10:12:18 -07:00
Dan Williams
0036731c88 async_tx: kill tx_set_src and tx_set_dest methods
The tx_set_src and tx_set_dest methods were originally implemented to allow
an array of addresses to be passed down from async_xor to the dmaengine
driver while minimizing stack overhead.  Removing these methods allows
drivers to have all transaction parameters available at 'prep' time, saves
two function pointers in struct dma_async_tx_descriptor, and reduces the
number of indirect branches..

A consequence of moving this data to the 'prep' routine is that
multi-source routines like async_xor need temporary storage to convert an
array of linear addresses into an array of dma addresses.  In order to keep
the same stack footprint of the previous implementation the input array is
reused as storage for the dma addresses.  This requires that
sizeof(dma_addr_t) be less than or equal to sizeof(void *).  As a
consequence CONFIG_DMADEVICES now depends on !CONFIG_HIGHMEM64G.  It also
requires that drivers be able to make descriptor resources available when
the 'prep' routine is polled.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
2008-02-06 10:12:17 -07:00
Dan Williams
d909b34759 async_tx: kill ASYNC_TX_ASSUME_COHERENT
Remove the unused ASYNC_TX_ASSUME_COHERENT flag.  Async_tx is
meant to hide the difference between asynchronous hardware and synchronous
software operations, this flag requires clients to understand cache
coherency consequences of the async path.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-06 10:12:17 -07:00
Denis Cheng
cf8f68aa76 async_tx: use LIST_HEAD instead of LIST_HEAD_INIT
single list_head variable initialized with LIST_HEAD_INIT could almost
always can be replaced with LIST_HEAD declaration, this shrinks the code
and looks better.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-02-06 10:12:17 -07:00
Dan Williams
1367a3d310 async_tx: fix compile breakage, mark do_async_xor __always_inline
do_async_xor must be compiled away on !HAS_DMA archs.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2008-02-06 10:12:17 -07:00
Linus Torvalds
eba0e319c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits)
  [CRYPTO] twofish: Merge common glue code
  [CRYPTO] hifn_795x: Fixup container_of() usage
  [CRYPTO] cast6: inline bloat--
  [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long
  [CRYPTO] tcrypt: Make xcbc available as a standalone test
  [CRYPTO] xcbc: Remove bogus hash/cipher test
  [CRYPTO] xcbc: Fix algorithm leak when block size check fails
  [CRYPTO] tcrypt: Zero axbuf in the right function
  [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation
  [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h
  [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20
  [CRYPTO] tcrypt: Add select of AEAD
  [CRYPTO] salsa20: Add x86-64 assembly version
  [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version)
  [CRYPTO] gcm: Introduce rfc4106
  [CRYPTO] api: Show async type
  [CRYPTO] chainiv: Avoid lock spinning where possible
  [CRYPTO] seqiv: Add select AEAD in Kconfig
  [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy
  [CRYPTO] null: Allow setkey on digest_null 
  ...
2008-01-25 08:38:25 -08:00
Ilpo Järvinen
e6ccc727f3 [CRYPTO] cast6: inline bloat--
Bloat-o-meter shows rather high readings for cast6...

crypto/cast6.c:
  cast6_setkey  | -1310
  cast6_encrypt | -4567
  cast6_decrypt | -4561
 3 functions changed, 10438 bytes removed, diff: -10438

crypto/cast6.c:
  W    | +659
  Q    | +308
  QBAR | +316
 3 functions changed, 1283 bytes added, diff: +1283

crypto/cast6.o:
 6 functions changed, 1283 bytes added, 10438 bytes removed, diff: -9155

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:17:02 +11:00
Herbert Xu
38ed9ab23b [CRYPTO] tcrypt: Make xcbc available as a standalone test
Currently the gcm(aes) tests have to be taken together with all other
algorithms.  This patch makes it available by itself at number 106.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:17:01 +11:00
Herbert Xu
94765b9e4c [CRYPTO] xcbc: Remove bogus hash/cipher test
When setting the digest size xcbc tests to see if the underlying algorithm
is a hash.  This is silly because we don't allow it to be a hash and we've
specifically requested for a cipher.

This patch removes the bogus test.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:17:00 +11:00
Herbert Xu
1b87887d6c [CRYPTO] xcbc: Fix algorithm leak when block size check fails
When the underlying algorithm has a block size other than 16 we abort
without freeing it.  In fact, we try to return the algorithm itself
as an error!

This patch plugs the leak and makes it return -EINVAL instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:17:00 +11:00
Herbert Xu
2a999a3abb [CRYPTO] tcrypt: Zero axbuf in the right function
The axbuf buffer is used by test_aead and therefore should be zeroed
there instead of in test_hash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:59 +11:00
Tan Swee Heng
214dc54f6f [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20
Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:58 +11:00
Sebastian Siewior
d1cda4e396 [CRYPTO] tcrypt: Add select of AEAD
ERROR: "crypto_aead_setauthsize" [crypto/tcrypt.ko] undefined!
 ERROR: "crypto_alloc_aead" [crypto/tcrypt.ko] undefined!

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:58 +11:00
Tan Swee Heng
9a7dafbba4 [CRYPTO] salsa20: Add x86-64 assembly version
This is the x86-64 version of the Salsa20 stream cipher algorithm. The
original assembly code came from
<http://cr.yp.to/snuffle/salsa20/amd64-3/salsa20.s>. It has been
reformatted for clarity.

Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:57 +11:00
Tan Swee Heng
974e4b752e [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version)
This patch contains the salsa20-i586 implementation. The original
assembly code came from
<http://cr.yp.to/snuffle/salsa20/x86-pm/salsa20.s>. I have reformatted
it (added indents) so that it matches the other algorithms in
arch/x86/crypto.

Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:57 +11:00
Herbert Xu
dadbc53d0b [CRYPTO] gcm: Introduce rfc4106
This patch introduces the rfc4106 wrapper for GCM just as we have an
rfc4309 wrapper for CCM.  The purpose of the wrapper is to include part
of the IV in the key so that it can be negotiated by IPsec.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:56 +11:00
Herbert Xu
189ed66e95 [CRYPTO] api: Show async type
This patch adds an async field to /proc/crypto for ablkcipher and aead
algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:56 +11:00
Herbert Xu
e7cd2514ea [CRYPTO] chainiv: Avoid lock spinning where possible
This patch makes chainiv avoid spinning by postponing requests on lock
contention if the user allows the use of asynchronous algorithms.  If
a synchronous algorithm is requested then we behave as before.

This should improve IPsec performance on SMP when two CPUs attempt to
transmit over the same SA.  Currently one of them will spin doing nothing
waiting for the other CPU to finish its encryption.  This patch makes it
postpone the request and get on with other work.

If only one CPU is transmitting for a given SA, then we will process
the request synchronously as before.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:55 +11:00
Herbert Xu
4726204200 [CRYPTO] seqiv: Add select AEAD in Kconfig
Now that seqiv supports AEAD algorithms it needs to select the AEAD option.

Thanks to Erez Zadok for pointing out the problem.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:55 +11:00
Herbert Xu
6e050778c5 [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy
It's better to return silently than crash and burn when someone feeds us
a zero length.  In particular the null digest algorithm when used as part
of authenc will do that to us.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:54 +11:00
Herbert Xu
ce5bd4aca3 [CRYPTO] null: Allow setkey on digest_null
We need to allow setkey on digest_null if it is to be used directly by
authenc instead of through hmac.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:54 +11:00
Herbert Xu
3631c650c4 [CRYPTO] null: Add null blkcipher algorithm
This patch adds a null blkcipher algorithm called ecb(cipher_null) for
backwards compatibility.  Previously the null algorithm when used by
IPsec copied the data byte by byte.  This new algorithm optimises that
to a straight memcpy which lets us better measure inherent overheads in
our IPsec code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:53 +11:00
Joy Latten
93cc74e078 [CRYPTO] tcrypt: Add CCM vectors
This patch adds 7 test vectors to tcrypt for CCM.
The test vectors are from rfc 3610.
There are about 10 more test vectors in RFC 3610
and 4 or 5 more in NIST. I can add these as time permits.

I also needed to set authsize. CCM has a prerequisite of
authsize. 

Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:53 +11:00
Joy Latten
4a49b499df [CRYPTO] ccm: Added CCM mode
This patch adds Counter with CBC-MAC (CCM) support.
RFC 3610 and NIST Special Publication 800-38C were referenced.

Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:53 +11:00
Herbert Xu
d29ce988ae [CRYPTO] aead: Create default givcipher instances
This patch makes crypto_alloc_aead always return algorithms that is
capable of generating their own IVs through givencrypt and givdecrypt.
All existing AEAD algorithms already do.  New ones must either supply
their own or specify a generic IV generator with the geniv field.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:52 +11:00
Herbert Xu
14df4d8043 [CRYPTO] seqiv: Add AEAD support
This patch adds support for using seqiv with AEAD algorithms.  This is
useful for those AEAD algorithms that performs authentication before
encryption because the IV generated by the underlying encryption algorithm
won't be available for authentication.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:52 +11:00
Herbert Xu
5b6d2d7fdf [CRYPTO] aead: Add aead_geniv_alloc/aead_geniv_free
This patch creates the infrastructure to help the construction of IV
generator templates that wrap around AEAD algorithms by adding an IV
generator to them.  This is useful for AEAD algorithms with no built-in
IV generator or to replace their built-in generator.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:51 +11:00
Herbert Xu
aedb30dc49 [CRYPTO] aead: Allow algorithms with no givcrypt support
Some algorithms always require manual IV construction.  For instance,
the generic CCM algorithm requires the first byte of the IV to be manually
constructed.  Such algorithms are always used by other algorithms equipped
with their own IV generators and do not need IV generation per se.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:50 +11:00
Herbert Xu
e56dd56418 [CRYPTO] authenc: Add givencrypt operation
This patch implements the givencrypt function for authenc.  It simply
calls the givencrypt operation on the underlying cipher instead of encrypt.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:50 +11:00
Herbert Xu
743edf5727 [CRYPTO] aead: Add givcrypt operations
This patch adds the underlying givcrypt operations for aead and associated
support elements.  The rationale is identical to that of the skcipher
givcrypt operations, i.e., sometimes only the algorithm knows how the
IV should be generated.

A new request type aead_givcrypt_request is added which contains an
embedded aead_request structure with two new elements to support this
operation.  The new elements are seq and giv.  The seq field should
contain a strictly increasing 64-bit integer which may be used by
certain IV generators as an input value.  The giv field will be used
to store the generated IV.  It does not need to obey the alignment
requirements of the algorithm because it's not used during the operation.

The existing iv field must still be available as it will be used to store
intermediate IVs and the output IV if chaining is desired.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:49 +11:00
Herbert Xu
0a270321db [CRYPTO] seqiv: Add Sequence Number IV Generator
This generator generates an IV based on a sequence number by xoring it
with a salt.  This algorithm is mainly useful for CTR and similar modes.

This patch also sets it as the default IV generator for ctr.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:48 +11:00
Herbert Xu
1472e5ebaa [CRYPTO] gcm: Use crypto_grab_skcipher
This patch converts the gcm algorithm over to crypto_grab_skcipher
which is a prerequisite for IV generation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:47 +11:00
Herbert Xu
d00aa19b50 [CRYPTO] gcm: Allow block cipher parameter
This patch adds the gcm_base template which takes a block cipher
parameter instead of cipher.  This allows the user to specify a
specific CTR implementation.

This also fixes a leak of the cipher algorithm that was previously
looked up but never freed.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:47 +11:00
Herbert Xu
9ffde35a8e [CRYPTO] authenc: Use crypto_grab_skcipher
This patch converts the authenc algorithm over to crypto_grab_skcipher
which is a prerequisite for IV generation.

This patch also changes authenc to set its ASYNC status depending on
the ASYNC status of the underlying skcipher.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:46 +11:00
Herbert Xu
b9c55aa475 [CRYPTO] skcipher: Create default givcipher instances
This patch makes crypto_alloc_ablkcipher/crypto_grab_skcipher always
return algorithms that are capable of generating their own IVs through
givencrypt and givdecrypt.  Each algorithm may specify its default IV
generator through the geniv field.

For algorithms that do not set the geniv field, the blkcipher layer will
pick a default.  Currently it's chainiv for synchronous algorithms and
eseqiv for asynchronous algorithms.  Note that if these wrappers do not
work on an algorithm then that algorithm must specify its own geniv or
it can't be used at all.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:46 +11:00
Herbert Xu
806d183aa6 [CRYPTO] eseqiv: Add Encrypted Sequence Number IV Generator
This generator generates an IV based on a sequence number by xoring it
with a salt and then encrypting it with the same key as used to encrypt
the plain text.  This algorithm requires that the block size be equal
to the IV size.  It is mainly useful for CBC.

It has one noteworthy property that for IPsec the IV happens to lie
just before the plain text so the IV generation simply increases the
number of encrypted blocks by one.  Therefore the cost of this generator
is entirely dependent on the speed of the underlying cipher.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:45 +11:00
Herbert Xu
7f47073911 [CRYPTO] chainiv: Add chain IV generator
The chain IV generator is the one we've been using in the IPsec stack.
It simply starts out with a random IV, then uses the last block of each
encrypted packet's cipher text as the IV for the next packet.

It can only be used by synchronous ciphers since we have to make sure
that we don't start the encryption of the next packet until the last
one has completed.

It does have the advantage of using very little CPU time since it doesn't
have to generate anything at all.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:44 +11:00
Herbert Xu
ecfc43292f [CRYPTO] skcipher: Add skcipher_geniv_alloc/skcipher_geniv_free
This patch creates the infrastructure to help the construction of givcipher
templates that wrap around existing blkcipher/ablkcipher algorithms by adding
an IV generator to them.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:44 +11:00
Herbert Xu
927eead52c [CRYPTO] cryptd: Use geniv of the underlying algorithm
If the underlying algorithm specifies a specific geniv algorithm then
we should use it for the cryptd version as well.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:43 +11:00
Herbert Xu
23508e11ab [CRYPTO] skcipher: Added geniv field
This patch introduces the geniv field which indicates the default IV
generator for each algorithm.  It should point to a string that is not
freed as long as the algorithm is registered.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:43 +11:00
Herbert Xu
61da88e2b8 [CRYPTO] skcipher: Add givcrypt operations and givcipher type
Different block cipher modes have different requirements for intialisation
vectors.  For example, CBC can use a simple randomly generated IV while
modes such as CTR must use an IV generation mechanisms that give a stronger
guarantee on the lack of collisions.  Furthermore, disk encryption modes
have their own IV generation algorithms.

Up until now IV generation has been left to the users of the symmetric
key cipher API.  This is inconvenient as the number of block cipher modes
increase because the user needs to be aware of which mode is supposed to
be paired with which IV generation algorithm.

Therefore it makes sense to integrate the IV generation into the crypto
API.  This patch takes the first step in that direction by creating two
new ablkcipher operations, givencrypt and givdecrypt that generates an
IV before performing the actual encryption or decryption.

The operations are currently not exposed to the user.  That will be done
once the underlying functionality has actually been implemented.

It also creates the underlying givcipher type.  Algorithms that directly
generate IVs would use it instead of ablkcipher.  All other algorithms
(including all existing ones) would generate a givcipher algorithm upon
registration.  This givcipher algorithm will be constructed from the geniv
string that's stored in every algorithm.  That string will locate a template
which is instantiated by the blkcipher/ablkcipher algorithm in question to
give a givcipher algorithm.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:43 +11:00
Herbert Xu
378f4f51f9 [CRYPTO] skcipher: Add crypto_grab_skcipher interface
Note: From now on the collective of ablkcipher/blkcipher/givcipher will
be known as skcipher, i.e., symmetric key cipher.  The name blkcipher has
always been much of a misnomer since it supports stream ciphers too.

This patch adds the function crypto_grab_skcipher as a new way of getting
an ablkcipher spawn.  The problem is that previously we did this in two
steps, first getting the algorithm and then calling crypto_init_spawn.

This meant that each spawn user had to be aware of what type and mask to
use for these two steps.  This is difficult and also presents a problem
when the type/mask changes as they're about to be for IV generators.

The new interface does both steps together just like crypto_alloc_ablkcipher.

As a side-effect this also allows us to be stronger on type enforcement
for spawns.  For now this is only done for ablkcipher but it's trivial
to extend for other types.

This patch also moves the type/mask logic for skcipher into the helpers
crypto_skcipher_type and crypto_skcipher_mask.

Finally this patch introduces the function crypto_require_sync to determine
whether the user is specifically requesting a sync algorithm.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:42 +11:00
Herbert Xu
84c9115230 [CRYPTO] gcm: Add support for async ciphers
This patch adds the necessary changes for GCM to be used with async
ciphers.  This would allow it to be used with hardware devices that
support CTR.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:42 +11:00
Herbert Xu
5311f248b7 [CRYPTO] ctr: Refactor into ctr and rfc3686
As discussed previously, this patch moves the basic CTR functionality
into a chainable algorithm called ctr.  The IPsec-specific variant of
it is now placed on top with the name rfc3686.

So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec
variant will be called rfc3686(ctr(aes)).  This patch also adjusts
gcm accordingly.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:41 +11:00
Herbert Xu
653ebd9c85 [CRYPTO] blkcipher: Merge ablkcipher and blkcipher into one option/module
With the impending addition of the givcipher type, both blkcipher and
ablkcipher algorithms will use it to create givcipher objects.  As such
it no longer makes sense to split the system between ablkcipher and
blkcipher.  In particular, both ablkcipher.c and blkcipher.c would need
to use the givcipher type which has to reside in ablkcipher.c since it
shares much code with it.

This patch merges the two Kconfig options as well as the modules into one.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:41 +11:00
Herbert Xu
2589469d7b [CRYPTO] gcm: Fix request context alignment
This patch fixes the request context alignment so that it is actually
aligned to the value required by the algorithm.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:40 +11:00
Herbert Xu
68b6c7d691 [CRYPTO] api: Add crypto_attr_alg_name
This patch adds a new helper crypto_attr_alg_name which is basically the
first half of crypto_attr_alg.  That is, it returns an algorithm name
parameter as a string without looking it up.  The caller can then look it
up immediately or defer it until later.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:40 +11:00
Borislav Petkov
5e553110f2 [CRYPTO] authenc: Select HASH in Kconfig
i get here:

----
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  Building modules, stage 2.
  MODPOST 226 modules
ERROR: "crypto_hash_type" [crypto/authenc.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
---

which fails because crypto_hash_type is declared in crypto/hash.c. You might wanna
fix it like so:

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:39 +11:00
Herbert Xu
7c3d703fa8 [CRYPTO] authenc: Merge common hashing code
This patch merges the common hashing code between encryption and decryption.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:38 +11:00