Instruction sets can include more or less complex operations which might
not fit the currently defined set of stack_ops.
Combining more than one stack_op provides more flexibility to describe
the behaviour of an instruction. This also reduces the need to define
new stack_ops specific to a single instruction set.
Allow instruction decoders to generate multiple stack_op per
instruction.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200327152847.15294-11-jthierry@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Perf shows we're spending a lot of time in find_insn() and the
statistics show we have around 3.2 million instruction. Increase the
hash table size to reduce the bucket load from around 50 to 3.
This shaves about 2s off of objtool on vmlinux.o runtime, down to 16s.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.617882545@infradead.org
A clang build reported an (obvious) double CLAC while a GCC build did not;
it turns out that objtool only re-visits instructions if the first visit
was with AC=0. If OTOH the first visit was with AC=1, it completely ignores
any subsequent visit, even when it has AC=0.
Fix this by using a visited mask instead of a boolean, and (explicitly)
mark the AC state.
$ ./objtool check -b --no-fp --retpoline --uaccess drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x22: redundant UACCESS disable
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xea: (alt)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0xffffffffffffffff: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xd9: (alt)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xb2: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x39: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x0: <=== (func)
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/617
Link: https://lkml.kernel.org/r/5359166aad2d53f3145cd442d83d0e5115e0cd17.1564007838.git.jpoimboe@redhat.com
This makes it easier to add new instruction types. Also it's hopefully
more robust since the compiler should warn about out-of-range enums.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/0740e96af0d40e54cfd6a07bf09db0fbd10793cd.1563413318.git.jpoimboe@redhat.com
This fixes objtool for both a GCC issue and a Clang issue:
1) GCC issue:
kernel/bpf/core.o: warning: objtool: ___bpf_prog_run()+0x8d5: sibling call from callable instruction with modified stack frame
With CONFIG_RETPOLINE=n, GCC is doing the following optimization in
___bpf_prog_run().
Before:
select_insn:
jmp *jumptable(,%rax,8)
...
ALU64_ADD_X:
...
jmp select_insn
ALU_ADD_X:
...
jmp select_insn
After:
select_insn:
jmp *jumptable(, %rax, 8)
...
ALU64_ADD_X:
...
jmp *jumptable(, %rax, 8)
ALU_ADD_X:
...
jmp *jumptable(, %rax, 8)
This confuses objtool. It has never seen multiple indirect jump
sites which use the same jump table.
For GCC switch tables, the only way of detecting the size of a table
is by continuing to scan for more tables. The size of the previous
table can only be determined after another switch table is found, or
when the scan reaches the end of the function.
That logic was reused for C jump tables, and was based on the
assumption that each jump table only has a single jump site. The
above optimization breaks that assumption.
2) Clang issue:
drivers/usb/misc/sisusbvga/sisusb.o: warning: objtool: sisusb_write_mem_bulk()+0x588: can't find switch jump table
With clang 9, code can be generated where a function contains two
indirect jump instructions which use the same switch table.
The fix is the same for both issues: split the jump table parsing into
two passes.
In the first pass, locate the heads of all switch tables for the
function and mark their locations.
In the second pass, parse the switch tables and add them.
Fixes: e55a73251d ("bpf: Fix ORC unwinding in non-JIT BPF code")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/e995befaada9d4d8b2cf788ff3f566ba900d2b4d.1563413318.git.jpoimboe@redhat.com
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having DF escape is BAD(tm).
Linus; you suggested this one, but since DF really is only used from
ASM and the failure case is fairly obvious, do we really need this?
OTOH the patch is fairly small and simple, so let's just do this
to demonstrate objtool's superior awesomeness.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is important that UACCESS regions are as small as possible;
furthermore the UACCESS state is not scheduled, so doing anything that
might directly call into the scheduler will cause random code to be
ran with UACCESS enabled.
Teach objtool too track UACCESS state and warn about any CALL made
while UACCESS is enabled. This very much includes the __fentry__()
and __preempt_schedule() calls.
Note that exceptions _do_ save/restore the UACCESS state, and therefore
they can drive preemption. This also means that all exception handlers
must have an otherwise redundant UACCESS disable instruction;
therefore ignore this warning for !STT_FUNC code (exception handlers
are not normal functions).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support for processing switch jump tables in objects with multiple
.rodata sections, such as those created by '-ffunction-sections' and
'-fdata-sections'. Currently, objtool always looks in .rodata for jump
table information, which results in many "sibling call from callable
instruction with modified stack frame" warnings with objects compiled
using those flags.
The fix is comprised of three parts:
1. Flagging all .rodata sections when importing ELF information for
easier checking later.
2. Keeping a reference to the section each relocation is from in order
to get the list_head for the other relocations in that section.
3. Finding jump tables by following relocations to .rodata sections,
rather than always referencing a single global .rodata section.
The patch has been tested without data sections enabled and no
differences in the resulting orc unwind information were seen.
Note that as objtool adds terminators to end of each .text section the
unwind information generated between a function+data sections build and
a normal build aren't directly comparable. Manual inspection suggests
that objtool is now generating the correct information, or at least
making more of an effort to do so than it did previously.
Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/099bdc375195c490dda04db777ee0b95d566ded1.1536325914.git.jpoimboe@redhat.com
The existing UNWIND_HINT_EMPTY annotations happen to be good indicators
of where entry code calls into C code for the first time. So also use
them to mark the end of the stack for the ORC unwinder.
Use that information to set unwind->error if the ORC unwinder doesn't
unwind all the way to the end. This will be needed for enabling
HAVE_RELIABLE_STACKTRACE for the ORC unwinder so we can use it with the
livepatch consistency model.
Thanks to Jiri Slaby for teaching the ORCs about the unwind hints.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/lkml/20180518064713.26440-5-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled
builds, where it validates no unannotated indirect jumps or calls are
left.
Add an additional .discard.retpoline_safe section to allow annotating
the few indirect sites that are required and safe.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the existing global variables instead of passing them around and
creating duplicate global variables.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus reported that GCC-7.3 generated a switch-table construct that
confused objtool. It turns out that, in particular due to KASAN, it is
possible to have unrelated .rodata usage in between the .rodata setup
for the switch-table and the following indirect jump.
The simple linear reverse search from the indirect jump would hit upon
the KASAN .rodata usage first and fail to find a switch_table,
resulting in a spurious 'sibling call with modified stack frame'
warning.
Fix this by creating a 'jump-stack' which we can 'unwind' during
reversal, thereby skipping over much of the in-between code.
This is not fool proof by any means, but is sufficient to make the
known cases work. Future work would be to construct more comprehensive
flow analysis code.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180208130232.GF25235@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Getting objtool to understand retpolines is going to be a bit of a
challenge. For now, take advantage of the fact that retpolines are
patched in with alternatives. Just read the original (sane)
non-alternative instruction, and ignore the patched-in retpoline.
This allows objtool to understand the control flow *around* the
retpoline, even if it can't yet follow what's inside. This means the
ORC unwinder will fail to unwind from inside a retpoline, but will work
fine otherwise.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-3-git-send-email-dwmw@amazon.co.uk
Arnd Bergmann reported the following warning with GCC 7.1.1:
fs/fs_pin.o: warning: objtool: pin_kill()+0x139: stack state mismatch: cfa1=7+88 cfa2=7+96
And the kbuild robot reported the following warnings with GCC 5.4.1:
fs/fs_pin.o: warning: objtool: pin_kill()+0x182: return with modified stack frame
fs/quota/dquot.o: warning: objtool: dquot_alloc_inode()+0x140: stack state mismatch: cfa1=7+120 cfa2=7+128
fs/quota/dquot.o: warning: objtool: dquot_free_inode()+0x11a: stack state mismatch: cfa1=7+112 cfa2=7+120
Those warnings are caused by an unusual GCC non-optimization where it
uses an intermediate register to adjust the stack pointer. It does:
lea 0x8(%rsp), %rcx
...
mov %rcx, %rsp
Instead of the obvious:
add $0x8, %rsp
It makes no sense to use an intermediate register, so I opened a GCC bug
to track it:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81813
But it's not exactly a high-priority bug and it looks like we'll be
stuck with this issue for a while. So for now we have to track register
values when they're loaded with stack pointer offsets.
This is kind of a big workaround for a tiny problem, but c'est la vie.
I hope to eventually create a GCC plugin to implement a big chunk of
objtool's functionality. Hopefully at that point we'll be able to
remove of a lot of these GCC-isms from the objtool code.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/6a41a96884c725e7f05413bb7df40cfe824b2444.1504028945.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When GCC realigns a function's stack, it sometimes uses %r13 as the DRAP
register, like:
push %r13
lea 0x10(%rsp), %r13
and $0xfffffffffffffff0, %rsp
pushq -0x8(%r13)
push %rbp
mov %rsp, %rbp
push %r13
...
mov -0x8(%rbp),%r13
leaveq
lea -0x10(%r13), %rsp
pop %r13
retq
Since %r13 was pushed onto the stack twice, its two stack locations need
to be stored separately. The first push of %r13 is its original value,
and the second push of %r13 is the caller's stack frame address.
Since %r13 is a callee-saved register, we need to track the stack
location of its original value separately from the DRAP register.
This fixes the following false positive warning:
lib/ubsan.o: warning: objtool: val_to_string.constprop.7()+0x97: leave instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/3da23a6d4c5b3c1e21fc2ccc21a73941b97ff20a.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Objtool tries to silence 'unreachable instruction' warnings when it
detects gcov is enabled, because gcov produces a lot of unreachable
instructions and they don't really matter.
However, the 0-day bot is still reporting some unreachable instruction
warnings with CONFIG_GCOV_KERNEL=y on GCC 4.6.4.
As it turns out, objtool's gcov detection doesn't work with older
versions of GCC because they don't create a bunch of symbols with the
'gcov.' prefix like newer versions of GCC do.
Move the gcov check out of objtool and instead just create a new
'--no-unreachable' flag which can be passed in by the kernel Makefile
when CONFIG_GCOV_KERNEL is defined.
Also rename the 'nofp' variable to 'no_fp' for consistency with the new
'no_unreachable' variable.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9cfffb1168 ("objtool: Skip all "unreachable instruction" warnings for gcov kernels")
Link: http://lkml.kernel.org/r/c243dc78eb2ffdabb6e927844dea39b6033cd395.1500939244.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some asm (and inline asm) code does special things to the stack which
objtool can't understand. (Nor can GCC or GNU assembler, for that
matter.) In such cases we need a facility for the code to provide
annotations, so the unwinder can unwind through it.
This provides such a facility, in the form of unwind hints. They're
similar to the GNU assembler .cfi* directives, but they give more
information, and are needed in far fewer places, because objtool can
fill in the blanks by following branches and adjusting the stack pointer
for pushes and pops.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/0f5f3c9104fca559ff4088bece1d14ae3bca52d5.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that objtool knows the states of all registers on the stack for each
instruction, it's straightforward to generate debuginfo for an unwinder
to use.
Instead of generating DWARF, generate a new format called ORC, which is
more suitable for an in-kernel unwinder. See
Documentation/x86/orc-unwinder.txt for a more detailed description of
this new debuginfo format and why it's preferable to DWARF.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/c9b9f01ba6c5ed2bdc9bb0957b78167fdbf9632e.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a major rewrite of objtool. Instead of only tracking frame
pointer changes, it now tracks all stack-related operations, including
all register saves/restores.
In addition to making stack validation more robust, this also paves the
way for undwarf generation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/678bd94c0566c6129bcc376cddb259c4c5633004.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for the new 'objtool undwarf generate' command, which
will rely on 'objtool check', move the checking code from
builtin-check.c to check.c where it can be used by other commands.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/294c5c695fd73c1a5000bbe5960a7c9bec4ee6b4.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
