Correct the data structures for OD feature support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trap handler behavior will differ when a debugger is attached.
Make the debug trap flag available in the trap handler TMA.
Update it when the debug trap ioctl is invoked.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The debugger can attach to a process prior to HSA enablement (i.e.
inferior is spawned by the debugger and attached to immediately before
target process has been enabled for HSA dispatches) or it
can attach to a running target that is already HSA enabled. Either
way, the debugger needs to know the enablement status to know when
it can inspect queues.
For the scenario where the debugger spawns the target process,
it will have to wait for ROCr's runtime enable request from the target.
The runtime enable request will be able to see that its process has been
debug attached. ROCr raises an EC_PROCESS_RUNTIME signal to the
debugger then blocks the target process while waiting the debugger's
response. Once the debugger has received the runtime signal, it will
unblock the target process.
For the scenario where the debugger attaches to a running target
process, ROCr will set the target process' runtime status as enabled so
that on an attach request, the debugger will be able to see this
status and will continue with debug enablement as normal.
A secondary requirement is to conditionally enable the trap tempories only
if the user requests it (env var HSA_ENABLE_DEBUG=1) or if the debugger
attaches with HSA runtime enabled. This is because setting up the trap
temporaries incurs a performance overhead that is unacceptable for
microbench performance in normal mode for certain customers.
In the scenario where the debugger spawns the target process, when ROCr
detects that the debugger has attached during the runtime enable
request, it will enable the trap temporaries before it blocks the target
process while waiting for the debugger to respond.
In the scenario where the debugger attaches to a running target process,
it will enable to trap temporaries itself.
Finally, there is an additional restriction that is required to be
enforced with runtime enable and HW debug mode setting. The debugger must
first ensure that HW debug mode has been enabled before permitting HW debug
mode operations.
With single process debug devices, allowing the debugger to set debug
HW modes prior to trap activation means that debug HW mode setting can
occur before the KFD has reserved the debug VMID (0xf) from the hardware
scheduler's VMID allocation resource pool. This can result in the
hardware scheduler assigning VMID 0xf to a non-debugged process and
having that process inherit debug HW mode settings intended for the
debugged target process instead, which is both incorrect and potentially
fatal for normal mode operation.
With multi process debug devices, allowing the debugger to set debug
HW modes prior to trap activation means that non-debugged processes
migrating to a new VMID could inherit unintended debug settings.
All debug operations that touch HW settings must require trap activation
where trap activation is triggered by both debug attach and runtime
enablement (target has KFD opened and is ready to dispatch work).
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a debug operation that allows the debugger to send an exception
directly to runtime through a payload address.
For memory violations, normal vmfault signals will be applied to
notify runtime instead after passing in the saved exception data
when a memory violation was raised to the debugger.
For runtime exceptions, this will unblock the runtime enable
function which will be explained and implemented in a follow up
patch.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Exception events can be generated from interrupts or queue activitity.
The raise event function will save exception status of a queue, device
or process then notify the debugger of the status change by writing to
a debugger polled file descriptor that the debugger provides during
debug attach.
For memory violation exceptions, extra exception data will be saved.
The debugger will be able to query the saved exception states by query
operation that will be provided by follow up patches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to a HW bug, waves in only half the shader arrays can enter trap.
When starting a debug session, relocate all waves to the first shader
array of each shader engine and mask off the 2nd shader array as
unavailable.
When ending a debug session, re-enable the 2nd shader array per
shader engine.
User CU masking per queue cannot be guaranteed to remain functional
if requested during debugging (e.g. user cu mask requests only 2nd shader
array as an available resource leading to zero HW resources available)
nor can runtime be alerted of any of these changes during execution.
Make user CU masking and debugging mutual exclusive with respect to
availability.
If the debugger tries to attach to a process with a user cu masked
queue, return the runtime status as enabled but busy.
If the debugger tries to attach and fails to reallocate queue waves to
the first shader array of each shader engine, return the runtime status
as enabled but with an error.
In addition, like any other mutli-process debug supported devices,
disable trap temporary setup per-process to avoid performance impact from
setup overhead.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable HW debug mode per process, all devices must be debug enabled
successfully. If a failure occures, rewind the enablement of debug mode
on the enabled devices.
A power management scenario that needs to be considered is HW
debug mode setting during GFXOFF. During GFXOFF, these registers
will be unreachable so we have to transiently disable GFXOFF when
setting. Also, some devices don't support the RLC save restore
function for these debug registers so we have to disable GFXOFF
completely during a debug session.
Cooperative launch also has debugging restriction based on HW/FW bugs.
If such bugs exists, the debugger cannot attach to a process that uses GWS
resources nor can GWS resources be requested if a process is being
debugged.
Multi-process debug devices can only enable trap temporaries based
on certain runtime scenerios, which will be explained when the
runtime enable functions are implemented in a follow up patch.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to the F32 HWS, the RS64 HWS for GFX11 now supports a multi-process
debug API.
The skip_process_ctx_clear ADD_QUEUE requirement is to prevent the MES
from clearing the process context when the first queue is added to the
scheduler in order to maintain debug mode settings during queue preemption
and restore. The MES clears the process context in this case due to an
unresolved FW caching bug during normal mode operations.
During debug mode, the KFD will hold a reference to the target process
so the process context should never go stale and MES can afford to skip
this requirement.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unlike single process debug devices, multi-process debug devices allow
debug mode setting per-VMID (non-device-global).
Because the HWS manages PASID-VMID mapping, the new MAP_PROCESS API allows
the KFD to forward the required SPI debug register write requests.
To request a new debug mode setting change, the KFD must be able to
preempt all queues then remap all queues with these new setting
requests for MAP_PROCESS to take effect.
Note that by default, trap enablement in non-debug mode must be disabled
for performance reasons for multi-process debug devices due to setup
overhead in FW.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Older HW only supports debugging on a single process because the
SPI debug mode setting registers are device global.
The HWS has supplied a single pinned VMID (0xf) for MAP_PROCESS
for debug purposes. To pin the VMID, the KFD will remove the VMID from
the HWS dynamic VMID allocation via SET_RESOUCES so that a debugged
process will never migrate away from its pinned VMID.
The KFD is responsible for reserving and releasing this pinned VMID
accordingly whenever the debugger attaches and detaches respectively.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The HWS schedule allows a grace period for wave completion prior to
preemption for better performance by avoiding CWSR on waves that can
potentially complete quickly. The debugger, on the other hand, will
want to inspect wave status immediately after it actively triggers
preemption (a suspend function to be provided).
To minimize latency between preemption and debugger wave inspection, allow
immediate preemption by setting the grace period to 0.
Note that setting the preepmtion grace period to 0 will result in an
infinite grace period being set due to a CP FW bug so set it to 1 for now.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the per-device calls to enable or disable HW debug mode
for GFX11.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX9.4.2 now supports per-VMID debug mode controls registers
(SPI_GDBG_PER_VMID_CNTL).
Because the KFD lets the HWS handle PASID-VMID mapping, the KFD will
forward all debug mode setting register writes to the HWS scheduler
using a new MAP_PROCESS API, so instead of writing to registers, return
the required register values that the HWS needs to write on debug enable
and disable.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to GFX9 debug devices, set the hardware debug mode by draining
the SPI appropriately prior the mode setting request.
Because GFX10 has waves allocated by the work group boundary and each
SE's SPI instances do not communicate, the SPI drain time is much longer.
This long drain time will be fixed for GFX11 onwards.
Also remove a bunch of deprecated misplaced references for GFX10.3.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flush delayed restore work in kfd_suspend_all_queues instead of
cancelling. Cancelling the work before it runs results in the queues
becoming permanently disabled. Flushing the work ensures that the
queue suspend/resume state stays balanced.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX9.4.1, the implicit wait count instruction on s_barrier is
disabled by default in the driver during normal operation for
performance requirements.
There is a hardware bug in GFX9.4.1 where if the implicit wait count
instruction after an s_barrier instruction is disabled, any wave that
hits an exception may step over the s_barrier when returning from the
trap handler with the barrier logic having no ability to be
aware of this, thereby causing other waves to wait at the barrier
indefinitely resulting in a shader hang. This bug has been corrected
for GFX9.4.2 and onward.
Since the debugger subscribes to hardware exceptions, in order to avoid
this bug, the debugger must enable implicit wait count on s_barrier
for a debug session and disable it on detach.
In order to change this setting in the in the device global SQ_CONFIG
register, the GFX pipeline must be idle. GFX9.4.1 as a compute device
will either dispatch work through the compute ring buffers used for
image post processing or through the hardware scheduler by the KFD.
Have the KGD suspend and drain the compute ring buffer, then suspend the
hardware scheduler and block any future KFD process job requests before
changing the implicit wait count setting. Once set, resume all work.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the per-device calls to enable or disable HW debug mode for
GFX9 prior to GFX9.4.1.
GFX9.4.1 and onward will require their own enable/disable sequence as
follow on patches.
When hardware debug mode setting is requested, waves will inherit
these settings in the Shader Processor Input's (SPI) Sequencer Global
Block (SQG). This means that the KGD must drain all waves from the SPI
into SQG (approximately 96 SPI clock cycles) prior to debug mode setting
to ensure that the order of operations that the debugger expects with
regards to debug mode setting transaction requests and wave inheritence
of that mode is upheld.
Also ensure that exception overrides are reset to their original state
prior to debug enable or disable.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:1036 kgd2kfd_interrupt() warn: inconsistent indenting
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users have reported that s2idle wasn't working on OEM Phoenix systems,
but it was root caused to be because `CONFIG_AMD_PMC` wasn't set in
the distribution kernel config.
To make this more apparent, raise the messaging to err instead of warn.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217497
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing debug trap registers references and initialize all debug
registers on boot by clearing the hardware exception overrides and the
wave allocation ID index.
The debugger requires that TTMPs 6 & 7 save the dispatch ID to map
waves onto dispatch during compute context inspection.
In order to correctly set this up, set the special reserved CP bit by
default whenever the MQD is initailized.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce the require KGD debug calls that will execute hardware debug
mode setting.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ROCm debugger will attach to a process to debug by PTRACE and will
expect the KFD to prepare a process for the target PID, whether the
target PID has opened the KFD device or not.
This patch is to explicity handle this requirement. Further HW mode
setting and runtime coordination requirements will be handled in
following patches.
In the case where the target process has not opened the KFD device,
a new KFD process must be created for the target PID.
The debugger as well as the target process for this case will have not
acquired any VMs so handle process restoration to correctly account for
this.
To coordinate with HSA runtime, the debugger must be aware of the target
process' runtime enablement status and will copy the runtime status
information into the debugged KFD process for later query.
On enablement, the debugger will subscribe to a set of exceptions where
each exception events will notify the debugger through a pollable FIFO
file descriptor that the debugger provides to the KFD to manage.
Finally on process termination of either the debugger or the target,
debugging must be disabled if it has not been done so.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose debug capabilities in the KFD topology node's HSA capabilities and
debug properties flags.
Ensure correct capabilities are exposed based on firmware support.
Flag definitions can be referenced in uapi/linux/kfd_sysfs.h.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce the GPU debug operations interface.
For ROCm-GDB to extend the GNU Debugger's ability to inspect the AMD GPU
instruction set, provide the necessary interface to allow the debugger
to HW debug-mode set and query exceptions per HSA queue, process or
device.
The runtime_enable interface coordinates exception handling with the
HSA runtime.
Usage is available in the kern docs at uapi/linux/kfd_ioctl.h.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was leftover from GC 9.4.3 bring up and is currently
unused. Drop it for now.
Cc: Philip.Yang@amd.com
Cc: rajneesh.bhardwaj@amd.com
Cc: Felix.Kuehling@amd.com
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable the pcie lane switching for some sienna_cichlid SKUs since it
might not work well on some platforms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the right data structure for allocation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add unique serial number support for smu_v13_0_6.
(use aid0 serial number by default)
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add throttle status in power context
Keep throttle status indicator in SMUv13 power context
v2: Removed Dummy definition
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PMFW interface headers to for new metrics table format and
throttling information.
v2: Added dummy definition for compilation error
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the function of amdgpu_bo_vm_destroy to handle the resource release
of shadow bo. During the amdgpu_mes_self_test, shadow bo released, but
vmbo->shadow_list was not, which caused a null pointer reference error
in amdgpu_device_recover_vram when GPU reset.
Fixes: 6c032c37ac ("drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:1841: warning: Function parameter or member 'event' not described in 'svm_range_evict'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by deleting the deviant arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:799: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:799: warning: Excess function parameter 'pcie_data' description in 'amdgpu_device_indirect_wreg'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:870: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg64'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:870: warning: Excess function parameter 'pcie_data' description in 'amdgpu_device_indirect_wreg64'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this warning by adding 'ring' arguments to kdoc.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1128: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to do -Werror builds on our CI. However, non-amdgpu breakages
have prevented us from doing so thus far. Also, there are a number of
additional checks that we should enable, that the community cares about
and are hidden behind -Wextra. So, define DRM_AMDGPU_WERROR to only
enable -Werror for the amdgpu kernel module and enable -Wextra while
disabling all of the checks that are too noisy.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenny Ho <kenny.ho@amd.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Kenny Ho <Kenny.Ho@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang with W=1 reports
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_int_process_v11.c:282:38: error: variable
'sq_int_priv' set but not used [-Werror,-Wunused-but-set-variable]
uint8_t sq_int_enc, sq_int_errtype, sq_int_priv;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit cf488dcd0a ("drm/amd: Allow s0ix without BIOS support") showed
improvements to power consumption over suspend when s0ix wasn't enabled in
BIOS and the system didn't support S3.
This patch however was misguided because the reason the system didn't
support S3 was because SMT was disabled in OEM BIOS setup.
This prevented the BIOS from allowing S3.
Also allowing GPUs to use the s2idle path actually causes problems if
they're invoked on systems that may not support s2idle in the platform
firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails
for any reason, which could lead to unexpected flows.
The original commit also fixed a problem during resume from suspend to idle
without hardware support, but this is no longer necessary with commit
ca47518663 ("drm/amd: Don't allow s0ix on APUs older than Raven")
Revert commit cf488dcd0a ("drm/amd: Allow s0ix without BIOS support")
to make it match the expected behavior again.
Cc: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:45: warning: Cannot understand * @DCN32_CRB_SEGMENT_SIZE_KB: Maximum Configurable Return Buffer size for
on line 45 - I thought it was a doc line
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1904: warning: Function parameter or member 'dc' not described in 'delay_cursor_until_vupdate'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1904: warning: Function parameter or member 'pipe_ctx' not described in 'delay_cursor_until_vupdate'
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:97: warning: Cannot understand * **************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:264: warning: Cannot understand * *************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:435: warning: Cannot understand * *************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:475: warning: Cannot understand * *************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:599:
warning: Function parameter or member 'dc' not described in
'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:599:
warning: Function parameter or member 'context' not described in
'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:587:
warning: Function parameter or member 'dc' not described in
'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:587:
warning: Function parameter or member 'context' not described in
'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch'
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After drm conduct amdgpu Makefile, amdgpu.ko has been created
and "amdgpu-y +=" in amdxcp Makefile isn't used.
So modify amdgpu-y to amdxcp-y and build amdxcp module.
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding & deleting the deviant arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'node' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'trigger' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'fault_page' not described in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Excess function parameter 'adev' description in 'svm_migrate_vma_to_ram'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:771: warning: Function parameter or member 'fault_page' not described in 'svm_migrate_vram_to_ram'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set finished fence to ETIME error if job timedout.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'xcp_id' argument.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:160: warning: Function parameter or member 'xcp_id' not described in 'amdgpu_amdkfd_reserve_mem_limit'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'inst' arguments to kdocs.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:428: warning: Function parameter or member 'inst' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:626: warning: Function parameter or member 'inst' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c:423: warning: Function parameter or member 'inst' not described in 'gmc_v10_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c:328: warning: Function parameter or member 'inst' not described in 'gmc_v11_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:950: warning: Function parameter or member 'inst' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'inst' arguments to kdocs.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:692: warning: Function parameter or member 'inst' not described in 'get_wave_count'
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:763: warning: Function parameter or member 'inst' not described in 'kgd_gfx_v9_get_cu_occupancy'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'xcc_id' arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1557: warning: Function parameter or member 'xcc_id' not described in 'gfx_v7_0_select_se_sh'
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:38: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_enter_safe_mode'
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:62: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_exit_safe_mode'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a return error is raised during validation and mapping of a
prange, this flag is set. It is a rare occurrence, but it could happen
when `amdgpu_hmm_range_get_pages_done` returns true. In such cases,
the caller should retry. However, it is important to ensure that the
prange is updated correctly during the retry.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
