mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
34216 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
38c23685b2 |
ARM: SoC driver updates for 4.17
The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaxiNzAAoJEGCrR//JCVInYhYP/2kPhc5t/kszA1bcklcbO9dY eX37Ra/RR4yQ5yeQZVIZ4UkUovxk9PmG2tM4K5oJaTDsz5pPEgavVOOr3sbfj6vb 4O9auTeysEQlHcbVdNFum0YS2gUY2YD7D12DTRorotLxCqod184ccWXq0XGfIWaY l3YRrcL/lPlqmyS3z/GNx9oNygOMUzEfXfIQYICyzHuYiLBUGnkKC1vIb+Hx1TDq Cxk++AUqH13Mss24O2A2QQh+oBHj2BybDLLqwcC5PSpsUbFrVCfzG54l43mig32T NOxV0Qnml2wAtU4H0QcgtSgwRimHD0YOiX8ssquvDDiqTqM5G+llSTGkEbYe+AUW 4GIZYoBOwGkfEXS+tyymHe9yfc5h1OLYAeFU1jRm723c7phanuu67rPn35YC8UMK zSql10JpkAGNzMikrxxb6wnis951w2UFlzhgZQ6ItA/nRq3l+oEQA0Qiljv965nz DVLsD5+gdhK6GBctkzlsD5HFn6GjM8JilnsOVPHD765nKnVBSxKiXRLV228XVug2 rChF1FhQqLnM54jCMqHZX5fS9SbSgtYswHqIXpVw6GmJkqq/Ly10yGR0vuWD+uyn BV7q5AKpGrwm6wZkMM2uZ1VdUtWzn856AbkqrvX/QhmJcX4McuqaLUrC8bSOj1ty KeVil0akq3nU+xHl5Ojs =Pmsx -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable amlogic: meson-gx-socinfo: Update soc ids soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings cpufreq: scmi: add thermal dependency soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC ... |
||
![]() |
167569343f |
ARM: SoC platform updates for 4.17
This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaxibSAAoJEGCrR//JCVInPwcP/2ZdLMXXXaJBM+rCRPhT+vR1 FsKqcTCC5RHbVcKW+N54nmlsqofy2GadlmyfOdrFXtbf+Sm2dRNsDrHDOhvoPp37 fwBd0wGw0PLjNE8SEPp/ldtFe11Dbg0WGBzJ4PAPJgt1W4hvW8//VzVW1XsiRrVc 9SlZ66DwR95UQ5pwy+dfE8f9A/WW4XaMq0UHQ3/deQ/Te/64b/C6CJtT3W73WAlR 83UHgkwq3WvI+hhvg4QX9H0Q6dcK2JLUWsAB0xnZP8Q8t30NdDpl61uZL0A4Mh9Y 38lPhUjPUyUpsGrOttmMEQNzbAk4m/nzQxByYYmhkx3x+mlhjdA9KNavxDYVxXN2 1tzz62wst8pLePqVt2UsFqsaruJGMuTIooOdc5iCjG1c2N2kQGdBsuOvLjYu9kV6 XPTfvvAYkMo9rC0MbdPuobG+h/WrYHuc9SD2Mnt+kNaw1yJL08fWENjSuwP7kheb 2A5jdAFNrGqgcrWMsQOw8eYYC7z7WojkLq0kHrBbwIlVD7KIZurv2fm/iVo4+xPH Gig5HuehMUtVYAf+Q1KWFlqS01fXMErt2pDGI5f1mNumXCB5kdWoSKbU8lOg03f8 ZqBHlfly+QDMOx0qfkxFX+phHPWHTOC+45yHK2Xq+n9urXmQbzYZxTzq5zCu6jcm 4yH0jaykoHODGNLIt50f =HD9V -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ... |
||
![]() |
b240b419db |
ARM: SoC device tree updates for 4.17
This is the usual set of changes for device trees, with over 700 non-merged changesets. There is an ongoing set of dtc warning fixes and the usual bugfixes, cleanups and added device support. The most interesting bit as usual is support for new machines listed below: - The Allwinner H6 makes its debut with the Pine-H64 board, and we get two new machines based on its older siblings: the H5 based OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side, we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2 Zero development board (based on H2). - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972 development board and p2888 CPU module. - The Nuvoton npcm750 is a BMC that was newly added, for now we only support running on the evaluation board. - STmicroelectronics stm32 gains support for the stm32mp157c and two evaluation boards. - The Toradex Colibri board family grows a few members based on the i.MX6ULL variant. - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family of chips. - The Phytec phyBOARD Mira is a family of industrial boards based on i.MX6. For now, four models get added. - TI am335x based PDU-001 is an industrial embedded machine used for traffic monitoring - The Aspeed platform now supports running on the BMC on the Qualcomm Centriq 2400 server - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm msm8974 based Galaxy S5 is a rather different phone made by the same company. - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file for the various boards made by Xilinx themselves, as well as the Digilent Zybo Z7. - The ARM Versatile family now supports the "IB2" interface board. - The Renesas H2 based "Stout" and the H3 based Salvator-X are more evaluation boards named after a kind of beer, as most of them are. The r8a77980 (V3H) based "Condor" apparently doesn't follow that tradition. ;-) - ROC-RK3328-CC is a simple developement board from the Libre Computer Project, based on the Rockchips RK3328 SoC - Haiku is another development board plus Qseven module based on Rockchips RK3368 and made by Theobroma Systems. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaxjFeAAoJEGCrR//JCVInw2gQALS/sK83IJE0Ngw98Cko8fqn NnbaLaZybajRCdZfXFrIgyL1YijsK4eeniA6zXvFixctlx0FcH2Ep1merbFa52Il bZKDOeCr6JfSggk2pZvnC7efwAsc5qMmSGU7KgvUV9vgAXTXANdTlVttoBrZldvI baR5W34BjcXRvA14FyxUPiQgGiCft3rE2ZJA9CqJQ9W44vxnTpbcYpimwya8LWss hhbJ8P73HhVsKlwS4QXajpLJSo52VdhGDZCd/MwH1yWjzgQZ7O2ijSFz3jYmvdZf 1guE1FhcpHX8/0j1v5OqfEFAjaFUl+Fef11McUlGe4lVM2C47kuNEil//cb4pJ2j ipQ0qR26GkoBmoxSlt0cI9yUtSemTWzZZSLeTPNQGytb7hRNdR22xwf2vr9Eh6dB PMG2G0VXVp5Xuif+3iDLxFKiPsBsN49RGtqOj6p9eZhbTIRjgQ5671T3Kla0KRLH CFlWyYYrRqtUVeM3XSXmNQb9pyuCDqOlLyVngDbCuz4HIly3I2kgSYLTCFZx5FfT kkVbNy+cO/TOkX8w1P8XiRDGQ16YHQ5kjvy1mUPiPEnf70L2gD8HXWeVX1J2SXzF OoeNJTzON0cpvtUaM/4hsASi5mHz8rv8CTH8HUviRlXvSH/7JqlM2XqhWSVJ+gYZ S7/RgDEviOzsHBf/EMUN =7rHo -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "This is the usual set of changes for device trees, with over 700 non-merged changesets. There is an ongoing set of dtc warning fixes and the usual bugfixes, cleanups and added device support. The most interesting bit as usual is support for new machines listed below: - The Allwinner H6 makes its debut with the Pine-H64 board, and we get two new machines based on its older siblings: the H5 based OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side, we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2 Zero development board (based on H2). - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972 development board and p2888 CPU module. - The Nuvoton npcm750 is a BMC that was newly added, for now we only support running on the evaluation board. - STmicroelectronics stm32 gains support for the stm32mp157c and two evaluation boards. - The Toradex Colibri board family grows a few members based on the i.MX6ULL variant. - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family of chips. - The Phytec phyBOARD Mira is a family of industrial boards based on i.MX6. For now, four models get added. - TI am335x based PDU-001 is an industrial embedded machine used for traffic monitoring - The Aspeed platform now supports running on the BMC on the Qualcomm Centriq 2400 server - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm msm8974 based Galaxy S5 is a rather different phone made by the same company. - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file for the various boards made by Xilinx themselves, as well as the Digilent Zybo Z7. - The ARM Versatile family now supports the "IB2" interface board. - The Renesas H2 based "Stout" and the H3 based Salvator-X are more evaluation boards named after a kind of beer, as most of them are. The r8a77980 (V3H) based "Condor" apparently doesn't follow that tradition. ;-) - ROC-RK3328-CC is a simple developement board from the Libre Computer Project, based on the Rockchips RK3328 SoC - Haiku is another development board plus Qseven module based on Rockchips RK3368 and made by Theobroma Systems" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits) arm: dts: modify Nuvoton NPCM7xx device tree structure arm: dts: modify Makefile NPCM750 configuration name arm: dts: modify clock binding in NPCM750 device tree arm: dts: modify timer register size in NPCM750 device tree arm: dts: modify UART compatible name in NPCM750 device tree arm: dts: add watchdog device to NPCM750 device tree arm64: dts: uniphier: add ethernet node for PXs3 ARM: dts: uniphier: add pinctrl groups of ethernet for second instance arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+ arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0 arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier arm: dts: armada-385-db-ap: use SPDX-License-Identifier arm: dts: armada-388-rd: use SPDX-License-Identifier arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier arm: dts: armada-370-db: use SPDX-License-Identifier arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs ... |
||
![]() |
9c2dd8405c |
DeviceTree updates for 4.17:
- Sync dtc to upstream version v1.4.6-9-gaadd0b65c987. This adds a bunch more warnings (hidden behind W=1). - Build dtc lexer and parser files instead of using shipped versions. - Rework overlay apply API to take an FDT as input and apply overlays in a single step. - Add a phandle lookup cache. This improves boot time by hundreds of msec on systems with large DT. - Add trivial mcp4017/18/19 potentiometers bindings. - Remove VLA stack usage in DT code. -----BEGIN PGP SIGNATURE----- iQItBAABCAAXBQJaxiUdEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcM0+w/+ L7nkug1Hz2476eRrsn5bm6oOO0vCrhQcDTJ/AlvU1YO8XBVgGEetLDs8drmvD0/O FQDcpumX6G0eFoHTnTNWD7keM+0nY5jZBIAqKQNa9a0HKkjYc4HO5Ot9E02XG8W8 759vvCcGeJpysoCls9u8OplzqiDyNVQJd1a0fLivtafdKypuE/Ywh15wrzckPO+F bxqWQd+uwm98ZVz8/o3vfYtAOJmA06A+hsyVLXYu7iKQcXYVxi+ZNbRV44MQ50NI 1w5m8GgtWe4A2lpXjmeXk1VmLPO3eEgQKnBoH7gcJmCHaVg/SVfMgBscuGSQZRQa rQvaYRUNGJ0Mtji8EZpZb5Vip4ZCDtZCQBB3snN24CvGXI6WuIIg/8ncXt0AfLqn pxFmC32ZcwvJR2NCpPVfTgILm6foT9IzJWKl6SQLVtqqVp9nPFua7T3l8AQak7FB 2MMaaqh7L0l0za0ZgArZZo/IWUHRb0MwZdXAkqBZlQ6f3IBqGQeKCnkclAeH8qYr OorCOmC2OlKXLPHoz8XHeBzPRdnv1dQ//gEkKXBJ2igLU03hRWv9dxnGju/45sun Ifo79uBAUc9s3F4Kjd/zs2iLztuPrYCSICHtJh9LPeOxoV1ZUNt+6Cm23yQ014Uo /GsFW+lzh7c9wB1eETjPHd1WuYXiSrmE4zvbdykyLCk= =ZWpa -----END PGP SIGNATURE----- Merge tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Sync dtc to upstream version v1.4.6-9-gaadd0b65c987. This adds a bunch more warnings (hidden behind W=1). - Build dtc lexer and parser files instead of using shipped versions. - Rework overlay apply API to take an FDT as input and apply overlays in a single step. - Add a phandle lookup cache. This improves boot time by hundreds of msec on systems with large DT. - Add trivial mcp4017/18/19 potentiometers bindings. - Remove VLA stack usage in DT code. * tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (26 commits) of: unittest: fix an error code in of_unittest_apply_overlay() of: unittest: move misplaced function declaration of: unittest: Remove VLA stack usage of: overlay: Fix forgotten reference to of_overlay_apply() of: Documentation: Fix forgotten reference to of_overlay_apply() of: unittest: local return value variable related cleanups of: unittest: remove unneeded local return value variables dt-bindings: trivial: add various mcp4017/18/19 potentiometers of: unittest: fix an error test in of_unittest_overlay_8() of: cache phandle nodes to reduce cost of of_find_node_by_phandle() dt-bindings: rockchip-dw-mshc: use consistent clock names MAINTAINERS: Add linux/of_*.h headers to appropriate subsystems scripts: turn off some new dtc warnings by default scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987 scripts/dtc: generate lexer and parser during build instead of shipping powerpc: boot: add strrchr function of: overlay: do not include path in full_name of added nodes of: unittest: clean up changeset test arm64/efi: Make strrchr() available to the EFI namespace ARM: boot: add strrchr function ... |
||
![]() |
be88751f32 |
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc filesystem updates from Jan Kara: "udf, ext2, quota, fsnotify fixes & cleanups: - udf fixes for handling of media without uid/gid - udf fixes for some corner cases in parsing of volume recognition sequence - improvements of fsnotify handling of ENOMEM - new ioctl to allow setting of watch descriptor id for inotify (for checkpoint - restart) - small ext2, reiserfs, quota cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Kill an unused extern entry form quota.h reiserfs: Remove VLA from fs/reiserfs/reiserfs.h udf: fix potential refcnt problem of nls module ext2: change return code to -ENOMEM when failing memory allocation udf: Do not mark possibly inconsistent filesystems as closed fsnotify: Let userspace know about lost events due to ENOMEM fanotify: Avoid lost events due to ENOMEM for unlimited queues udf: Remove never implemented mount options udf: Update mount option documentation udf: Provide saner default for invalid uid / gid udf: Clean up handling of invalid uid/gid udf: Apply uid/gid mount options also to new inodes & chown udf: Ignore [ug]id=ignore mount options udf: Fix handling of Partition Descriptors udf: Unify common handling of descriptors udf: Convert descriptor index definitions to enum udf: Allow volume descriptor sequence to be terminated by unrecorded block udf: Simplify handling of Volume Descriptor Pointers udf: Fix off-by-one in volume descriptor sequence length inotify: Extend ioctl to allow to request id of new watch descriptor |
||
![]() |
274c0e74e5 |
f2fs-for-4.17-rc1
In this round, we've mainly focused on performance tuning and critical bug fixes occurred in low-end devices. Sheng Yong introduced lost_found feature to keep missing files during recovery instead of thrashing them. We're preparing coming fsverity implementation. And, we've got more features to communicate with users for better performance. In low-end devices, some memory-related issues were fixed, and subtle race condtions and corner cases were addressed as well. Enhancement: - large nat bitmaps for more free node ids - add three block allocation policies to pass down write hints given by user - expose extension list to user and introduce hot file extension - tune small devices seamlessly for low-end devices - set readdir_ra by default - give more resources under gc_urgent mode regarding to discard and cleaning - introduce fsync_mode to enforce posix or not - nowait aio support - add lost_found feature to keep dangling inodes - reserve bits for future fsverity feature - add test_dummy_encryption for FBE Bug fix: - don't use highmem for dentry pages - align memory boundary for bitops - truncate preallocated blocks in write errors - guarantee i_times on fsync call - clear CP_TRIMMED_FLAG correctly - prevent node chain loop during recovery - avoid data race between atomic write and background cleaning - avoid unnecessary selinux violation warnings on resgid option - GFP_NOFS to avoid deadlock in quota and read paths - fix f2fs_skip_inode_update to allow i_size recovery In addition to them, there are several minor bug fixes and clean-ups. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAlrFmaYACgkQQBSofoJI UNKaSw//RZraDQmODfDieyjGAd8y1NgGDju1jgk62QJUqe/G3jIKN/A39HU3I2Ak jLIotwZ8j1yNBUGbXMXZTY+6sRkQGJrcgawgvZ0gwWSeqTAiCi+AbqnNysTv8pDp Rh1iMCGvNKv1/vbFizJumcK2haH/KzX9Z7uDBjji4N7tTT1nUGVz+vmUO/qS6Xi0 44BrEN1rhaF71JNaiQE0WuEc0GY2IU0W7l4IWirJeNqsK0BTVPnq1vxc8SsQQRmn Wdr4rUw2SRAynGMCQZlMW/sG0sxV0WMAE0xVE8WCFMXzHx2GNVakUgXMTZ2DgUKT JlgdsB5NQYrZJqSEAdNq3WclJpznlhOLHp8hjITxSRxhd2j7GH7xujUoGSsNiXDr n2s3Xg6wWMx+D4vsfXYJuZQKYqZUcBlPRgXa74/aXnsxRTLaormJtFNWkLqELIzR Qaw7XIhZoOyKkH7CPSWk0eYyQVi13l9QV70iyBfY4bcN2aLZLxTX2Axwws3ESOCt Nf0jIe3L4k7MSdoMR0K51rhCMlPWDuddnQSs9Vsw3w8U5pVph+BKG5RBUI9N4hPv U0gKJfj8LIaxhHTfborEHf+hjq/0sN0TBPFBsAtqvv1LBXkMeWEeo0wXtxSJC89b 3xBRQ0p4Nox4fEHs36AZID2OMOV8iamiEqzP/o9ja0sMzEjnYmo= =Ligi -----END PGP SIGNATURE----- Merge tag 'f2fs-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs update from Jaegeuk Kim: "In this round, we've mainly focused on performance tuning and critical bug fixes occurred in low-end devices. Sheng Yong introduced lost_found feature to keep missing files during recovery instead of thrashing them. We're preparing coming fsverity implementation. And, we've got more features to communicate with users for better performance. In low-end devices, some memory-related issues were fixed, and subtle race condtions and corner cases were addressed as well. Enhancements: - large nat bitmaps for more free node ids - add three block allocation policies to pass down write hints given by user - expose extension list to user and introduce hot file extension - tune small devices seamlessly for low-end devices - set readdir_ra by default - give more resources under gc_urgent mode regarding to discard and cleaning - introduce fsync_mode to enforce posix or not - nowait aio support - add lost_found feature to keep dangling inodes - reserve bits for future fsverity feature - add test_dummy_encryption for FBE Bug fixes: - don't use highmem for dentry pages - align memory boundary for bitops - truncate preallocated blocks in write errors - guarantee i_times on fsync call - clear CP_TRIMMED_FLAG correctly - prevent node chain loop during recovery - avoid data race between atomic write and background cleaning - avoid unnecessary selinux violation warnings on resgid option - GFP_NOFS to avoid deadlock in quota and read paths - fix f2fs_skip_inode_update to allow i_size recovery In addition to the above, there are several minor bug fixes and clean-ups" * tag 'f2fs-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits) f2fs: remain written times to update inode during fsync f2fs: make assignment of t->dentry_bitmap more readable f2fs: truncate preallocated blocks in error case f2fs: fix a wrong condition in f2fs_skip_inode_update f2fs: reserve bits for fs-verity f2fs: Add a segment type check in inplace write f2fs: no need to initialize zero value for GFP_F2FS_ZERO f2fs: don't track new nat entry in nat set f2fs: clean up with F2FS_BLK_ALIGN f2fs: check blkaddr more accuratly before issue a bio f2fs: Set GF_NOFS in read_cache_page_gfp while doing f2fs_quota_read f2fs: introduce a new mount option test_dummy_encryption f2fs: introduce F2FS_FEATURE_LOST_FOUND feature f2fs: release locks before return in f2fs_ioc_gc_range() f2fs: align memory boundary for bitops f2fs: remove unneeded set_cold_node() f2fs: add nowait aio support f2fs: wrap all options with f2fs_sb_info.mount_opt f2fs: Don't overwrite all types of node to keep node chain f2fs: introduce mount option for fsync mode ... |
||
![]() |
052c220da3 |
SCSI for-linus on 20180404
This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc, ufs, mpt3sas, hisi_sas. In addition we have removed several really old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c initialization from all remaining drivers. Plus an assortment of bug fixes, initialization errors and other minor fixes. Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWsVSnSYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbvbAP9ErpTZ OR5iJ5HIz4W3Bd8aTfEpJrDyeYwSUC+sra5SKQD/ZWyVB3fYFSg+ZROyT26pmtmd SdImhG7hLaHgVvF5qRQ= =SQ/n -----END PGP SIGNATURE----- Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc, ufs, mpt3sas, hisi_sas. In addition we have removed several really old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c initialization from all remaining drivers. Plus an assortment of bug fixes, initialization errors and other minor fixes" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits) scsi: ufs: Add support for Auto-Hibernate Idle Timer scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries scsi: qla2xxx: fx00 copypaste typo scsi: qla2xxx: fix error message on <qla2400 scsi: smartpqi: update driver version scsi: smartpqi: workaround fw bug for oq deletion scsi: arcmsr: Change driver version to v1.40.00.05-20180309 scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection. scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug scsi: qla2xxx: Update driver version to 10.00.00.06-k scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY scsi: qla2xxx: Remove nvme_done_list scsi: qla2xxx: Return busy if rport going away scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change scsi: qla2xxx: Add FC-NVMe abort processing scsi: qla2xxx: Add changes for devloss timeout in driver ... |
||
![]() |
3526dd0c78 |
for-4.17/block-20180402
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCAAGBQJawr05AAoJEPfTWPspceCmT2UP/1uuaqwzyl4VjFNb/k7KS7UM +Cs/1HBlGomgMA8orDTGqtWqLRdR3z4RSh0+MvXTzQ78HpFVYz7CbDc9itHm+G9M X0ypD4kF/JGCFb5cxk+x6qv28uO2nv4DP3+0hHqJWLH4UVJBWDY6bs4BPShsf9QB I6XjioNMhoqylXgdOITLODJZz+TcChlJMDAqwhpJwh9TH1wjobleAZ6AdmCPfgi5 h0UCKMUKzcVJlNZwQUrzrs2cxcx9Uhunnbz7HK0ZV4n/FKFtDpGynFpQQ71pZxKe Be0ZOBPCQvC3ykOM/egCIvC/e5y7FgrjORD6jxyu1PTwAugI5E1VYSMxHkXvgPAx zOo9A7RT4GPO2tDQv+DbzNFpqeSAclTgSmr+/y1wmheBs8DiSt7MPVBiNM4zdCNv NLk9z7IEjFhdmluSB/LbTb1aokypMb/q7QTLouPHdwGn80k7yrhFyLHgdjpNTQ2K UHfHZvGxkOX6SmFhBNOtIFUkuSceenh64a0RkRle7filx+ImpbCVm2/GYi9zZNCu EtctgzLbLmz40zMiyDaZS2bxBgGzfn6yf4xd9LsaAJPMhvZnmXogT0D9ctWXB0WU mMaS7sOkLnNjnGkzF1fHkeiZ/oigrstJbe+CA7BtOdwxpWn6MZBgKEoFQ6iA2b3X 5J1axMgVH5LAsIEcEQVq =RVhK -----END PGP SIGNATURE----- Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ... |
||
![]() |
5414ab31b1 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - new driver for PhoenixRC Flight Controller Adapter - new driver for RAVE SP Power button - fixes for autosuspend-related deadlocks in a few unput USB dirvers - support for 2nd wheel in ATech PS/2 mouse - fix for ALPS trackpoint detection on Thinkpad L570 and Latitude 7370 - bunch of cleanups in various in PS/2 protocols - other assorted changes and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad Input: stmfts, s6sy761 - update my e-mail Input: stmfts - use async probe & suspend/resume to avoid 2s delay Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370 Input: xpad - add PDP device id 0x02a4 Input: alps - report pressure of v3 and v7 trackstick Input: pxrc - new driver for PhoenixRC Flight Controller Adapter Input: usbtouchscreen - do not rely on input_dev->users Input: usbtouchscreen - fix deadlock in autosuspend Input: pegasus_notetaker - do not rely on input_dev->users Input: pagasus_notetaker - fix deadlock in autosuspend Input: synaptics_usb - do not rely on input_dev->users Input: synaptics_usb - fix deadlock in autosuspend Input: gpio-keys - add support for wakeup event action Input: appletouch - use true and false for boolean values Input: silead - add Chuwi Hi8 support Input: analog - use get_cycles() on PPC Input: stmpe-keypad - remove VLA usage Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list Input: add RAVE SP Powerbutton driver ... |
||
![]() |
672a9c1069 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: kfifo: fix inaccurate comment tools/thermal: tmon: fix for segfault net: Spelling s/stucture/structure/ edd: don't spam log if no EDD information is present Documentation: Fix early-microcode.txt references after file rename tracing: Block comments should align the * on each line treewide: Fix typos in printk GenWQE: Fix a typo in two comments treewide: Align function definition open/close braces |
||
![]() |
e8403b493f |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina: - 3rd generation Wacom Intuos BT device support from Aaron Armstrong Skomra - support for NSG-MR5U and NSG-MR7U devices from Todd Kelner - multitouch Razer Blade Stealth support from Benjamin Tissoires - Elantech touchpad support from Alexandrov Stansilav - a few other scattered-around fixes and cleanups to drivers and generic code * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (31 commits) HID: google: Enable PM Full On mode when adjusting backlight HID: google: add google hammer HID driver HID: core: reset the quirks before calling probe again HID: multitouch: do not set HID_QUIRK_NO_INIT_REPORTS HID: core: remove the need for HID_QUIRK_NO_EMPTY_INPUT HID: use BIT() macro for quirks too HID: use BIT macro instead of plain integers for flags HID: multitouch: remove dead zones of Razer Blade Stealth HID: multitouch: export a quirk for the button handling of touchpads HID: usbhid: extend the polling interval configuration to keyboards HID: ntrig: document sysfs interface HID: wacom: wacom_wac_collection() is local to wacom_wac.c HID: wacom: generic: add the "Report Valid" usage HID: wacom: generic: Support multiple tools per report HID: wacom: Add support for 3rd generation Intuos BT HID: core: rewrite the hid-generic automatic unbind HID: sony: Add touchpad support for NSG-MR5U and NSG-MR7U remotes HID: hid-multitouch: Use true and false for boolean values HID: hid-ntrig: use true and false for boolean values HID: logitech-hidpp: document sysfs interface ... |
||
![]() |
e02d37bf55 |
sound updates for 4.17-rc1
This became a large update. The changes are scattered widely, and majority of them are attributed to ASoC componentization. The gitk output made me dizzy, but it's slightly better than London tube. OK, below are some highlights: - Continued hardening works in ALSA PCM core; most of the existing syzkaller reports should have been covered. - USB-audio got the initial USB Audio Class 3 support, as well as UAC2 jack detection support and more DSD-device support. - ASoC componentization: finally each individual driver was converted to components framework, which is more future-proof for further works. Most of conversations were systematic. - Lots of fixes for Intel Baytrail / Cherrytrail devices with Realtek codecs, typically tablets and small PCs. - Fixes / cleanups for Samsung Odroid systems - Cleanups in Freescale SSI driver - New ASoC drivers: * AKM AK4458 and AK5558 codecs * A few AMD based machine drivers * Intel Kabylake machine drivers * Maxim MAX9759 codec * Motorola CPCAP codec * Socionext Uniphier SoCs * TI PCM1789 and TDA7419 codecs - Retirement of Blackfin drivers along with architecture removal. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlrF2gUOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE/ZLhAAvUgpOkpHRmvyXoqhWdG/FWWFWtoFrQaDZE5y NPcGHy/ZLuCXGL3Zpsm9lZqXd1sxRdsxF3hiWT0JqqC7oxs/oSOhSzf7w6P9ppW7 nxZKo4SCSQpmy0Y58QhwpXUkuGzRAOXcug39BNiAqxjtWPPNT8bUj/br3ApH9+90 Dtittl26Z1Eek1KwNJDMdJt8l5P4P5Ls44g/9Xwhgxk/P0nHmErNuUftlNc/65/b HdVgLSXVJbfJ9dLRjQC0yg7jPzSgSp5xssAkWGfPv8AMnM6ql7LWGO+6zOdVcOUo 0ipKJpZHUI/k1Uv4yBxI32GueOl/gH78M3iGv1CVe/jaC8g8XXA5GScnG41U1ZUO p9f78q8jk+O4uCDvbCvigw+iqb7Lm7ME0jNaQ6gZzZX2sDDBUBIYMS6W658pQfgT w00c73gm7J+MPv4FsVyyzZsmqyO/xE/1x9F2eGut67DbCKVcfQnyheYJq3Gt96qo tzvJ+cy3JxCfGn7Ngl2/i8jtHD6sGf1Pl3gOPk5DEN2qfuBy/vQ4W4TlJ1pOqGFG JjpUhEpvYhP/XPrFo970g2yYQq5VsjumQiHGxbD56qu4hrkPU3w92gYKNc0F689j QQRc8gyAvUp78ZletF4WYLf6H1yNmkP3ufhsuP1MQWuxRmTcxVtIRDU1PLAq5J8w 10mGs6s= =F3q1 -----END PGP SIGNATURE----- Merge tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became a large update. The changes are scattered widely, and the majority of them are attributed to ASoC componentization. The gitk output made me dizzy, but it's slightly better than London tube. OK, below are some highlights: - Continued hardening works in ALSA PCM core; most of the existing syzkaller reports should have been covered. - USB-audio got the initial USB Audio Class 3 support, as well as UAC2 jack detection support and more DSD-device support. - ASoC componentization: finally each individual driver was converted to components framework, which is more future-proof for further works. Most of conversations were systematic. - Lots of fixes for Intel Baytrail / Cherrytrail devices with Realtek codecs, typically tablets and small PCs. - Fixes / cleanups for Samsung Odroid systems - Cleanups in Freescale SSI driver - New ASoC drivers: * AKM AK4458 and AK5558 codecs * A few AMD based machine drivers * Intel Kabylake machine drivers * Maxim MAX9759 codec * Motorola CPCAP codec * Socionext Uniphier SoCs * TI PCM1789 and TDA7419 codecs - Retirement of Blackfin drivers along with architecture removal" * tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits) ALSA: pcm: Fix UAF at PCM release via PCM timer access ALSA: usb-audio: silence a static checker warning ASoC: tscs42xx: Remove owner assignment from i2c_driver ASoC: mediatek: remove "simple-mfd" in the example ASoC: cpcap: replace codec to component ASoC: Intel: bytcr_rt5651: don't use codec anymore ASoC: amd: don't use codec anymore ALSA: usb-audio: fix memory leak on cval ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls ASoC: topology: Fix kcontrol name string handling ALSA: aloop: Mark paused device as inactive ALSA: usb-audio: update clock valid control ALSA: usb-audio: UAC2 jack detection ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams ALSA: pcm: Avoid potential races between OSS ioctls and read/write ALSA: usb-audio: Integrate native DSD support for ITF-USB based DACs. ALSA: usb-audio: FIX native DSD support for TEAC UD-501 DAC ALSA: usb-audio: Add native DSD support for Luxman DA-06 ALSA: usb-audio: fix uac control query argument ASoC: nau8824: recover system clock when device changes ... |
||
![]() |
1b2951dd99 |
This is the bulk of GPIO changes for the v4.17 kernel cycle:
New drivers: - Nintendo Wii GameCube GPIO, known as "Hollywood" - Raspberry Pi mailbox service GPIO expander - Spreadtrum main SC9860 SoC and IEC GPIO controllers. Improvements: - Implemented .get_multiple() callback for most of the high-performance industrial GPIO cards for the ISA bus. - ISA GPIO drivers now select the ISA_BUS_API instead of depending on it. This is merged with the same pattern for all the ISA drivers and some other Kconfig cleanups related to this. Cleanup: - Delete the TZ1090 GPIO drivers following the deletion of this SoC from the ARM tree. - Move the documentation over to driver-api to conform with the rest of the kernel documentation build. - Continue to make the GPIO drivers include only <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we want to get rid of. - Managed to remove VLA allocation from two drivers pending more fixes in this area for the next merge window. - Misc janitorial fixes. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaxIehAAoJEEEQszewGV1zlEAP/3p3E6J8vPqJNV/C39c40krC ajo0ndiTC7cotmCXNQOl9xfMCTgkjBtx3WEKwTDfCsuWW+2YB0DRmMd0Bkf2RWjQ nM4rB64FzAu+rdD9jdGtfn24ofylSRFaHNQ/V8Prc2JVAXJt4DS97h+6kwzIAqCm A/xXQAx67k5qoTXLvR2n/8LX8TphSe2kwH/f/3/lJpNLfLCRRJ3GqJfpa72jw2eL 4VIPc6KmttkqzJ1GFtzLPfhkhRr0p4sSzUNydlj5BKhmOSVu6Afv5ylgpK/p38dQ mGvNqFnU0lpwelsoZK75YikDFbqQjn4XkXJGvmIRMw4qM7crcw5oSkeMwCrcGqJW 7Uo7NoQU94wcQSZTppFQdaJs7NHdcnpW7jcfRYYetZL/6eDGBtfxoym90Lyjvaqs y+ykofbadI0X/9omO5j+qozvIneLam/CF7iDRUb/5t1LJbNwtXUsVYhz3FuwPDt1 ZHb6w+np9ZHN6H9jz3b/F9B/uQt54pshm7NorSXrJvZfKrv8kV14MoHgYsuQDDjV khbveygB8DwaPeV4XjpLeYhJB1L/Wjf46CVD6tyaCRDByGQmdoJEQF9QB2CxrF2J ouaaaS8tSC0IK/mKMMgJxC1Vr2gh0NMlQ3AL9EJDJvX+9RoIA2gwtBAiGnlEcdq3 GyFAZ0szb5P4BaNnX9qc =C5t5 -----END PGP SIGNATURE----- Merge tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.17 kernel cycle: New drivers: - Nintendo Wii GameCube GPIO, known as "Hollywood" - Raspberry Pi mailbox service GPIO expander - Spreadtrum main SC9860 SoC and IEC GPIO controllers. Improvements: - Implemented .get_multiple() callback for most of the high-performance industrial GPIO cards for the ISA bus. - ISA GPIO drivers now select the ISA_BUS_API instead of depending on it. This is merged with the same pattern for all the ISA drivers and some other Kconfig cleanups related to this. Cleanup: - Delete the TZ1090 GPIO drivers following the deletion of this SoC from the ARM tree. - Move the documentation over to driver-api to conform with the rest of the kernel documentation build. - Continue to make the GPIO drivers include only <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we want to get rid of. - Managed to remove VLA allocation from two drivers pending more fixes in this area for the next merge window. - Misc janitorial fixes" * tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: Add Spreadtrum PMIC EIC driver support gpio: Add Spreadtrum EIC driver support dt-bindings: gpio: Add Spreadtrum EIC controller documentation gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe() pinctrl: qcom: Don't allow protected pins to be requested gpiolib: Support 'gpio-reserved-ranges' property gpiolib: Change bitmap allocation to kmalloc_array gpiolib: Extract mask allocation into subroutine dt-bindings: gpio: Add a gpio-reserved-ranges property gpio: mockup: fix a potential crash when creating debugfs entries gpio: pca953x: add compatibility for pcal6524 and pcal9555a gpio: dwapb: Add support for a bus clock gpio: Remove VLA from xra1403 driver gpio: Remove VLA from MAX3191X driver gpio: ws16c48: Implement get_multiple callback gpio: gpio-mm: Implement get_multiple callback gpio: 104-idi-48: Implement get_multiple callback gpio: 104-dio-48e: Implement get_multiple callback gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks gpio: pci-idio-16: Implement get_multiple callback ... |
||
![]() |
e2d39e0f95 |
Merge branch 'for-4.17/upstream' into for-linus
Pull a few small generic code cleanups. |
||
![]() |
06dd3dfeea |
Char/Misc patches for 4.17-rc1
Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - and a handfull of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsShSQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykNqwCfUbfvopswb1PesHCLABDBsFQChgoAniDa6pS9 kI8TN5MdLN85UU27Mkb6 =BzFR -----END PGP SIGNATURE----- Merge tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - ... and a handful of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits) hwtracing: Add HW tracing support menu intel_th: Add ACPI glue layer intel_th: Allow forcing host mode through drvdata intel_th: Pick up irq number from resources intel_th: Don't touch switch routing in host mode intel_th: Use correct method of finding hub intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate stm class: Make dummy's master/channel ranges configurable stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate MAINTAINERS: Bestow upon myself the care for drivers/hwtracing hv: add SPDX license id to Kconfig hv: add SPDX license to trace Drivers: hv: vmbus: do not mark HV_PCIE as perf_device Drivers: hv: vmbus: respect what we get from hv_get_synint_state() /dev/mem: Avoid overwriting "err" in read_mem() eeprom: at24: use SPDX identifier instead of GPL boiler-plate eeprom: at24: simplify the i2c functionality checking eeprom: at24: fix a line break eeprom: at24: tweak newlines eeprom: at24: refactor at24_probe() ... |
||
![]() |
38047d5c26 |
Driver core patches for 4.17-rc1
Here is the "big" set of driver core patches for 4.17-rc1. There's really not much here, just a bunch of firmware code refactoring from Luis as he attempts to wrangle that codebase into something that is managable, along with a bunch of userspace tests for it. Other than that, a handful of small bugfixes and reverts of things that didn't work out. Full details are in the shortlog, it's not all that much. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSiGg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylPpACgyEKOur8rwp/3uBRxqhoFeWp1RtAAoIvlMjn6 MQ8LIeHNLRnpqGX5L78L =93HA -----END PGP SIGNATURE----- Merge tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 4.17-rc1. There's really not much here, just a bunch of firmware code refactoring from Luis as he attempts to wrangle that codebase into something that is managable, along with a bunch of userspace tests for it. Other than that, a handful of small bugfixes and reverts of things that didn't work out. Full details are in the shortlog, it's not all that much. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) drivers: base: remove check for callback in coredump_store() mt7601u: use firmware_request_cache() to address cache on reboot firmware: add firmware_request_cache() to help with cache on reboot firmware: fix typo on pr_info_once() when ignore_sysfs_fallback is used firmware: explicitly include vmalloc.h firmware: ensure the firmware cache is not used on incompatible calls test_firmware: modify custom fallback tests to use unique files firmware: add helper to check to see if fw cache is setup firmware: fix checking for return values for fw_add_devm_name() rename: _request_firmware_load() fw_load_sysfs_fallback() test_firmware: test three firmware kernel configs using a proc knob test_firmware: expand on library with shared helpers firmware: enable to force disable the fallback mechanism at run time firmware: enable run time change of forcing fallback loader firmware: move firmware loader into its own directory firmware: split firmware fallback functionality into its own file firmware: move loading timeout under struct firmware_fallback_config firmware: use helpers for setting up a temporary cache timeout firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further drivers: base: add description for .coredump() callback ... |
||
![]() |
df34df483a |
Staging/IIO patches for 4.17-rc1
Here is the big set of Staging/IIO driver patches for 4.17-rc1. It is a lot, over 500 changes, but not huge by previous kernel release standards. We deleted more lines than we added again (27k added vs. 91k remvoed), thanks to finally being able to delete the IRDA drivers and networking code. We also deleted the ccree crypto driver, but that's coming back in through the crypto tree to you, in a much cleaned-up form. Added this round is at lot of "mt7621" device support, which is for an embedded device that Neil Brown cares about, and of course a handful of new IIO drivers as well. And finally, the fsl-mc core code moved out of the staging tree to the "real" part of the kernel, which is nice to see happen as well. Full details are in the shortlog, which has all of the tiny cleanup patches described. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSnAA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yn60ACgxKvU/5XBP14hBkBpAcD0Q43OHe0AniEti65M Kw03GWK3NNM3pzk49BjZ =sj3K -----END PGP SIGNATURE----- Merge tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big set of Staging/IIO driver patches for 4.17-rc1. It is a lot, over 500 changes, but not huge by previous kernel release standards. We deleted more lines than we added again (27k added vs. 91k remvoed), thanks to finally being able to delete the IRDA drivers and networking code. We also deleted the ccree crypto driver, but that's coming back in through the crypto tree to you, in a much cleaned-up form. Added this round is at lot of "mt7621" device support, which is for an embedded device that Neil Brown cares about, and of course a handful of new IIO drivers as well. And finally, the fsl-mc core code moved out of the staging tree to the "real" part of the kernel, which is nice to see happen as well. Full details are in the shortlog, which has all of the tiny cleanup patches described. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits) staging: rtl8723bs: Remove yield call, replace with cond_resched() staging: rtl8723bs: Replace yield() call with cond_resched() staging: rtl8723bs: Remove unecessary newlines from 'odm.h'. staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style. staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style. staging: rtl8723bs: Replace NULL pointer comparison with '!'. staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections. staging: rtl8723bs: Fix function signature that goes over 80 characters. staging: rtl8723bs: Fix lines too long in update_recvframe_attrib(). staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'. staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'. staging: rtl8723bs: Add missing braces in else statement. staging: rtl8723bs: Add spaces around ternary operators. staging: rtl8723bs: Fix lines with trailing open parentheses. staging: rtl8723bs: Remove unnecessary length #define's. staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants. staging: rtl8723bs: Fix alignment in rtw_wx_set_auth(). staging: rtl8723bs: Remove braces from single statement conditionals. staging: rtl8723bs: Remove unecessary braces from switch statement. staging: rtl8723bs: Fix newlines in rtw_wx_set_auth(). ... |
||
![]() |
9abf8acea2 |
TTY/Serial driver patches for 4.17-rc1
Here is the big set of tty and serial driver patches for 4.17-rc1 Not all that big really, most are just small fixes and additions to existing drivers. There's a bunch of work on the imx serial driver recently for some reason, and a new embedded serial driver added as well. Full details are in the shortlog. All of these have been in the linux-next tree for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSn+w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynb6wCdEf5dAUrSB37ptZY78n4kc6nI6NAAniDO+rjL ppZZp7QTIB/bnPfW8cOH =+tfY -----END PGP SIGNATURE----- Merge tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver patches for 4.17-rc1 Not all that big really, most are just small fixes and additions to existing drivers. There's a bunch of work on the imx serial driver recently for some reason, and a new embedded serial driver added as well. Full details are in the shortlog. All of these have been in the linux-next tree for a while with no reported issues" * tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits) serial: expose buf_overrun count through proc interface serial: mvebu-uart: fix tx lost characters tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe() tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP 8250-men-mcb: add support for 16z025 and 16z057 powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused serial: stm32: fix initialization of RS485 mode ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards vt: change SGR 21 to follow the standards serdev: Fix typo in serdev_device_alloc ARM: dts: STi: Fix aliases property name for STi boards tty: st-asc: Update tty alias serial: stm32: add support for RS485 hardware control mode dt-bindings: serial: stm32: add RS485 optional properties selftests: add devpts selftests devpts: comment devpts_mntget() devpts: resolve devpts bind-mounts devpts: hoist out check for DEVPTS_SUPER_MAGIC serial: 8250: Add Nuvoton NPCM UART serial: mxs-auart: disable clks of Alphascale ASM9260 ... |
||
![]() |
ac9053d2dc |
USB/PHY patches for 4.17-rc1
Here is the big set of USB and PHY driver patches for 4.17-rc1. Lots of USB typeC work happened this round, with code moving from the staging directory into the "real" part of the kernel, as well as new infrastructure being added to be able to handle the different types of "roles" that typeC requires. There is also the normal huge set of USB gadget controller and driver updates, along with XHCI changes, and a raft of other tiny fixes all over the USB tree. And the PHY driver updates are merged in here as well as they interacted with the USB drivers in some places. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSpJw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylGawCdED2xS3HUxOIqfh81d8B1py8ji04AoJXdLAsH JgwXbdbibZBabYTVi5s5 =LrRH -----END PGP SIGNATURE----- Merge tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.17-rc1. Lots of USB typeC work happened this round, with code moving from the staging directory into the "real" part of the kernel, as well as new infrastructure being added to be able to handle the different types of "roles" that typeC requires. There is also the normal huge set of USB gadget controller and driver updates, along with XHCI changes, and a raft of other tiny fixes all over the USB tree. And the PHY driver updates are merged in here as well as they interacted with the USB drivers in some places. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits) Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" usb: musb: gadget: misplaced out of bounds check usb: chipidea: imx: Fix ULPI on imx53 usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag usb: chipidea: usbmisc: small clean up usb: chipidea: usbmisc: evdo can be set e/o reset usb: chipidea: usbmisc: evdo is only specific to OTG port USB: serial: ftdi_sio: add Id for Physik Instrumente E-870 usb: dwc3: gadget: never call ->complete() from ->ep_queue() usb: gadget: udc: core: update usb_ep_queue() documentation usb: host: Remove the deprecated ATH79 USB host config options usb: roles: Fix return value check in intel_xhci_usb_probe() USB: gadget: f_midi: fixing a possible double-free in f_midi usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks usb: core: Copy parameter string correctly and remove superfluous null check USB: announce bcdDevice as well as idVendor, idProduct. USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw usb: hub: Reduce warning to notice on power loss USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator USB: serial: cp210x: add ELDAT Easywave RX09 id ... |
||
![]() |
9eb31227cb |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - add AEAD support to crypto engine - allow batch registration in simd Algorithms: - add CFB mode - add speck block cipher - add sm4 block cipher - new test case for crct10dif - improve scheduling latency on ARM - scatter/gather support to gcm in aesni - convert x86 crypto algorithms to skcihper Drivers: - hmac(sha224/sha256) support in inside-secure - aes gcm/ccm support in stm32 - stm32mp1 support in stm32 - ccree driver from staging tree - gcm support over QI in caam - add ks-sa hwrng driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (212 commits) crypto: ccree - remove unused enums crypto: ahash - Fix early termination in hash walk crypto: brcm - explicitly cast cipher to hash type crypto: talitos - don't leak pointers to authenc keys crypto: qat - don't leak pointers to authenc keys crypto: picoxcell - don't leak pointers to authenc keys crypto: ixp4xx - don't leak pointers to authenc keys crypto: chelsio - don't leak pointers to authenc keys crypto: caam/qi - don't leak pointers to authenc keys crypto: caam - don't leak pointers to authenc keys crypto: lrw - Free rctx->ext with kzfree crypto: talitos - fix IPsec cipher in length crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array() crypto: doc - clarify hash callbacks state machine crypto: api - Keep failed instances alive crypto: api - Make crypto_alg_lookup static crypto: api - Remove unused crypto_type lookup function crypto: chelsio - Remove declaration of static function from header crypto: inside-secure - hmac(sha224) support crypto: inside-secure - hmac(sha256) support .. |
||
![]() |
23221d997b |
arm64 updates for 4.17
Nothing particularly stands out here, probably because people were tied up with spectre/meltdown stuff last time around. Still, the main pieces are: - Rework of our CPU features framework so that we can whitelist CPUs that don't require kpti even in a heterogeneous system - Support for the IDC/DIC architecture extensions, which allow us to elide instruction and data cache maintenance when writing out instructions - Removal of the large memory model which resulted in suboptimal codegen by the compiler and increased the use of literal pools, which could potentially be used as ROP gadgets since they are mapped as executable - Rework of forced signal delivery so that the siginfo_t is well-formed and handling of show_unhandled_signals is consolidated and made consistent between different fault types - More siginfo cleanup based on the initial patches from Eric Biederman - Workaround for Cortex-A55 erratum #1024718 - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi - Misc cleanups and non-critical fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCgAGBQJaw1TCAAoJELescNyEwWM0gyQIAJVMK4QveBW+LwF96NYdZo16 p90Aa+nqKelh/s93govQArDMv1gxyuXdFlQZVOGPQHfqpz6RhJWmBA2tFsUbQrUc OBcioPrRihqTmKBe+1r1XORwZxkVX6GGmCn0LYpPR7I3TjxXZpvxqaxGxiUvHkci yVxWlDTyN/7eL3akhCpCDagN3Fxwk3QnJLqE3fxOFMlY7NvQcmUxcITiUl/s469q xK6SWH9SRH1JK8jTHPitwUBiU//3FfCqSI9HLEdDIDoTuPcVM8UetWvi4QzrzJL1 UYg8lmU0CXNmflDzZJDaMf+qFApOrGxR0YVPpBzlQvxe0JIY69g48f+JzDPz8nc= =+gNa -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Nothing particularly stands out here, probably because people were tied up with spectre/meltdown stuff last time around. Still, the main pieces are: - Rework of our CPU features framework so that we can whitelist CPUs that don't require kpti even in a heterogeneous system - Support for the IDC/DIC architecture extensions, which allow us to elide instruction and data cache maintenance when writing out instructions - Removal of the large memory model which resulted in suboptimal codegen by the compiler and increased the use of literal pools, which could potentially be used as ROP gadgets since they are mapped as executable - Rework of forced signal delivery so that the siginfo_t is well-formed and handling of show_unhandled_signals is consolidated and made consistent between different fault types - More siginfo cleanup based on the initial patches from Eric Biederman - Workaround for Cortex-A55 erratum #1024718 - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi - Misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits) arm64: uaccess: Fix omissions from usercopy whitelist arm64: fpsimd: Split cpu field out from struct fpsimd_state arm64: tlbflush: avoid writing RES0 bits arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC arm64: fpsimd: include <linux/init.h> in fpsimd.h drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor perf: arm_spe: include linux/vmalloc.h for vmap() Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)" arm64: cpufeature: Avoid warnings due to unused symbols arm64: Add work around for Arm Cortex-A55 Erratum 1024718 arm64: Delay enabling hardware DBM feature arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35 arm64: capabilities: Handle shared entries arm64: capabilities: Add support for checks based on a list of MIDRs arm64: Add helpers for checking CPU MIDR against a range arm64: capabilities: Clean up midr range helpers arm64: capabilities: Change scope of VHE to Boot CPU feature ... |
||
![]() |
5b1f3dc927 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner: "The usual pile of boring changes: - Consolidate tasklet functions to share code instead of duplicating it - The first step for making the low level entry handler management on multi-platform kernels generic - A new sysfs file which allows to retrieve the wakeup state of interrupts. - Ensure that the interrupt thread follows the effective affinity and not the programmed affinity to avoid cross core wakeups. - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm PDC) - Fix the wakeup path clock handling for Reneasas interrupt chips. - Rework the boot time register reset for ARM GIC-V2/3 - Better suspend/resume support for ARM GIV-V3/ITS - Add missing locking to the ARM GIC set_type() callback - Small fixes for the irq simulator code - SPDX identifiers for the irq core code and removal of boiler plate - Small cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) openrisc: Set CONFIG_MULTI_IRQ_HANDLER arm64: Set CONFIG_MULTI_IRQ_HANDLER genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER irqchip/gic: Take lock when updating irq type irqchip/gic: Update supports_deactivate static key to modern api irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling irqchip: Add a driver for the Microsemi Ocelot controller dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn irqchip/gic-v3: Don't try to reset AP0Rn irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs genirq: Remove license boilerplate/references genirq: Add missing SPDX identifiers genirq/matrix: Cleanup SPDX identifier genirq: Cleanup top of file comments genirq: Pass desc to __irq_free instead of irq number irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER ... |
||
![]() |
680014d6d1 |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time(r) updates from Thomas Gleixner: "A small set of updates for timers and timekeeping: - The most interesting change is the consolidation of clock MONOTONIC and clock BOOTTIME. Clock MONOTONIC behaves now exactly like clock BOOTTIME and does not longer ignore the time spent in suspend. A new clock MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in kernels before this change. This allows applications to programmatically check for the clock MONOTONIC behaviour. As discussed in the review thread, this has the potential of breaking user space and we might have to revert this. Knock on wood that we can avoid that exercise. - Updates to the NTP mechanism to improve accuracy - A new kernel internal data structure to aid the ongoing Y2038 work. - Cleanups and simplifications of the clocksource code. - Make the alarmtimer code play nicely with debugobjects" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Init nanosleep alarm timer on stack y2038: Introduce struct __kernel_old_timeval tracing: Unify the "boot" and "mono" tracing clocks hrtimer: Unify MONOTONIC and BOOTTIME clock behavior posix-timers: Unify MONOTONIC and BOOTTIME clock behavior timekeeping: Remove boot time specific code Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock timekeeping/ntp: Determine the multiplier directly from NTP tick length timekeeping/ntp: Don't align NTP frequency adjustments to ticks clocksource: Use ATTRIBUTE_GROUPS clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes clocksource: Don't walk the clocksource list for empty override |
||
![]() |
a8f8e8ac76 |
various SMB3/CIFS fixes for 4.17
-----BEGIN PGP SIGNATURE----- iQGwBAABCAAaBQJaxRzZExxzbWZyZW5jaEBnbWFpbC5jb20ACgkQiiy9cAdyT1Fb FQv/Rd/5CrYhZumBrPvFW2jcbRQ2ANTnSRTA3rpd/jJM52DZ7nvcePr/qm9wRLrT puMfd8e0a4Df5Mo/ns806iphRtYctKpMKLnkBqPL0WqrXLYSi/Nz3wy/DFyuh3C7 U22gDYAjQ4dy6Am0CG/y4i1h8D0hRkmMS6PQECpjmNwqjtmfZn5kWJRv+W5UNNj9 QPldz5PdyNpPw7DxDRetl5uGqUKqsvUATo109hL7ks97qgHUzMHeXWmQpOSS+exh P7tPNphIPJYM2VG+uDvIg15l00lgQxzzN0uOs+x7ZDnZ1Bil/a3So823SfJyXNU2 utJNWSuN/OSHUCmmd7yn+rLd2oJa55+U+Bb3gWaZ8beP639d8P1kEF/isJzu6ede gh92lyU2ecfyHNbjKzAbQwwQxnkmMC5XGhP/2+eawsCyo+vk/NQR4NIehqawj/OB eQSRnT0vNgi4p4OXgJ3FpBBKNBFtTmWrxqKyl0U9C5nw+YdxBdkr16qlFi2b9DjC bW0/ =VW5l -----END PGP SIGNATURE----- Merge tag '4.17-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs updates from Steve French: "Includes SMB3.11 security improvements, as well as various fixes for stable and some debugging improvements" * tag '4.17-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add minor debug message during negprot smb3: Fix root directory when server returns inode number of zero cifs: fix sparse warning on previous patch in a few printks cifs: add server->vals->header_preamble_size cifs: smbd: disconnect transport on RDMA errors cifs: smbd: avoid reconnect lockup Don't log confusing message on reconnect by default Don't log expected error on DFS referral request fs: cifs: Replace _free_xid call in cifs_root_iget function SMB3.1.1 dialect is no longer experimental Tree connect for SMB3.1.1 must be signed for non-encrypted shares fix smb3-encryption breakage when CONFIG_DEBUG_SG=y CIFS: fix sha512 check in cifs_crypto_secmech_release CIFS: implement v3.11 preauth integrity CIFS: add sha512 secmech CIFS: refactor crypto shash/sdesc allocation&free Update README file for cifs.ko Update TODO list for cifs.ko cifs: fix memory leak in SMB2_open() CIFS: SMBD: fix spelling mistake: "faield" and "legnth" |
||
![]() |
fe5f31a801 |
Linux 4.16-rc2
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlqKKI0eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGRNAH/0v3+nuJ0oiHE1Cl fH89F9Ma17j8oTo28byRPi7X5XJfJAqANhHa209rguvnC27y3ew/l9k93HoxG12i ttvyKFDQulQbytfJZXw8lhUyYGXVsTpyNaihPe/NtqPdIxNgfrXsUN9EIEtcnuS2 SiAj51jUySDRNR4ST6TOx4ulDm1zLrmA28WHOBNOTvDi4jTQMt1TsngHfF5AySBB lD4RTRDDwWDWtdMI7euYSq019TiDXCxmwQ94vZjrqmjmSQcl/yCK/JzEV33SZslg 4WqGIllxONvP/UlwxZLaJ+RrslqxNgDVqQKwJdfYhGaWvpgPFtS1s86zW6IgyXny 02jJfD0= =DLWn -----END PGP SIGNATURE----- Merge tag 'v4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into mtd/next Backmerge v4.16-rc2 into mtd/next to resolve a conflict between Linus' master branch and nand/for-4.17. |
||
![]() |
a88b5f3833 |
Core changes:
* Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices * Move onenand code base to the drivers/mtd/nand/ dir * Rework timing mode selection * Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported * Stop embedding ONFI/JEDEC param page in nand_chip Driver changes: * Rework/cleanup of the mxc driver * Various cleanups in the vf610 driver * Migrate the fsmc and vf610 to ->exec_op() * Get rid of the pxa driver (replaced by marvell_nand) * Support ->setup_data_interface() in the GPMI driver * Fix probe error path in several drivers * Remove support for unused hw_syndrome mode in sunxi_nand * Various minor improvements -----BEGIN PGP SIGNATURE----- iQI5BAABCAAjBQJavURPHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ Ze02AX4ItwDzsw//YqnrDG6JzEBGEEJ0c1I6O/2Zk9eDrXhDeKk2S4G292QGQ4by 8bKYpHo3al9TxTBb/to6+BexoP717tSwbn+AcW5W2YqGpIAeSGaw1POGau9E7l71 wQh1aECOXCpLVLKbv/JFspiKMJYj+irxoTjdR6/3FjawDx0ruLwCCLlvOFlfkUOM ESv+hZv9364jcq/SsydYTYaIc95IsfBOUZVYcXRRdtaI7hvD9ljfXRSGNh+Guovc Bmvyiv9VuUBRg/v26gdQjESVfs3k37YV6LfS5eQSPuCHs2WGaZa5S6mBpHunAxTN bhbd+vVwzMaDSmX29Xsml+isJnmTdBBJRcg4qusY/nBjeUHtY2nj5J3bq+CuhSwj q2MB6YyBStqeagzBvctt3wzG9S7ZsVGU+PMtpMkH4T8BY+Bff9yFCPmRZwTUOorK iVuVhS2NImvJZ05/hc9VchAmSqd4PozHM08oW0NC6FqnF63hinkzw0J3K6FXycFF q/6lioZFHE8qJbD3LhDqCrLJoRDQDpxVQmZP9RCL1iozW7GNIYD7/IrPrsgqSQNa P10PvPt8lbBNq3GU3mIMtajTVihRJmH4Kdxd2i08dRp4hxIakF9Zx3MOhw5gZc0b C0xoFgaEvxbyb5P3VGVy7LYTvTfvJ9KsacntTSn7LrIU3D7meXmwnHynq5A= =uvio -----END PGP SIGNATURE----- Merge tag 'nand/for-4.17' of git://git.infradead.org/linux-mtd into mtd/next Core changes: * Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices * Move onenand code base to the drivers/mtd/nand/ dir * Rework timing mode selection * Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported * Stop embedding ONFI/JEDEC param page in nand_chip Driver changes: * Rework/cleanup of the mxc driver * Various cleanups in the vf610 driver * Migrate the fsmc and vf610 to ->exec_op() * Get rid of the pxa driver (replaced by marvell_nand) * Support ->setup_data_interface() in the GPMI driver * Fix probe error path in several drivers * Remove support for unused hw_syndrome mode in sunxi_nand * Various minor improvements |
||
![]() |
7c0ed565d2 |
* Make fsl-quaspi assign different names to MTD devices connected
to the same QSPI controller * Remove an unneeded driver.bus assigned in the fsl-qspi driver -----BEGIN PGP SIGNATURE----- iQI5BAABCAAjBQJave/9HBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ Ze02AX4ItwDmHA//aTyORv01HibZYWnCfVBVe4InP5SkaY7CBLJIU9bNhAzMc29p E31CjAUD2dPB+lm3VEv3/qEKpWlDkNeJr0eA84wVq9N+7HbAVCcWg8QaGQ2XFW6V Qbuu7dLKWrpe+CjFn+llfgdfmFdIfkA9ANBIh95WUo7+Y/v5/AfzCplnoDTnHDui Wl8i3+2uQ86yC1WQpRBWxqv6gHk/nlfMoJLPu6FFNSFCEQLncV2IJ4AmLFYS9n+t 83eu+uqdwe3oBDD6hBKT17VL67AYMdORvYofdB7AZ5Hkg7/MNoJ98Pz/5UKaWHpC tnc21CSduwb+7Sd6l5Ln3kceGGskcqvrfqYdxJpoY99JY1WTIYLy+MLPSnKDEaxj u2fjI0mrzX/FWIswEWl5oCpbHh0pmpuLzfD1tUU3qbpIVnr/FIgU3umBBqprrfbh nUVj9On1MBLghjd+u0c8iGpbVe8+XqGTDGmD5Xcxg1MJdTJqtbRLTF56f/E2dwxN 1DdWSxNnvF8KIUMKbVWBX5H2pA5pHo8kI6ZHDhYq9TF5fJaOq1250tG5COJAaBdc i7SiUZinnixnKmNVtZSmdD1rWZ3gIXi0BzKQXLmVyraEw1rbhezYQG8ivjP4VC0C onbHTEPS2eli/g4iSMlV6iR+ePnK6qEjJYWkNC4gVOlUXePQ/hy05kGyYTo= =Wrxi -----END PGP SIGNATURE----- Merge tag 'spi-nor/for-4.17' of git://git.infradead.org/linux-mtd into mtd/next * Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller * Remove an unneeded driver.bus assigned in the fsl-qspi driver |
||
![]() |
df25d407af |
Merge branch 'lorenzo/pci/rcar'
* lorenzo/pci/rcar: dt-bindings: PCI: rcar: Add device tree support for r8a7743 PCI: rcar-gen2: Remove duplicated bit-wise or of RCAR_PCI_INT_SIGRETABORT |
||
![]() |
11ee090552 |
Merge branch 'lorenzo/pci/mediatek'
* lorenzo/pci/mediatek: dt-bindings: PCI: MediaTek: fix dtc warnings |
||
![]() |
f3c91098a4 |
Merge branch 'lorenzo/pci/dwc'
* lorenzo/pci/dwc: PCI: histb: Add an optional regulator for PCIe port power control PCI: histb: Fix error path of histb_pcie_host_enable() PCI: qcom: Use regulator bulk api for apq8064 supplies PCI: qcom: Add missing supplies required for msm8996 PCI: designware-ep: Fix typo in error message |
||
![]() |
64ae499cf2 |
Merge branch 'pci/portdrv'
- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) * pci/portdrv: PCI/DPC: Rename from pcie-dpc.c to dpc.c PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS PCI/AER: Use cached AER Capability offset PCI/portdrv: Rename and reverse sense of pcie_ports_auto PCI/portdrv: Encapsulate pcie_ports_auto inside the port driver PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter PCI/portdrv: Remove unnecessary include of <linux/pci-aspm.h> PCI/portdrv: Simplify PCIe feature permission checking PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VC PCI/portdrv: Remove pcie_port_bus_type link order dependency PCI/portdrv: Disable port driver in compat mode PCI/PM: Clear PCIe PME Status bit for Root Complex Event Collectors PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver PCI/PM: Move pcie_clear_root_pme_status() to core PCI/portdrv: Merge pcieport_if.h into portdrv.h PCI/portdrv: Move pcieport_if.h to drivers/pci/pcie/ Conflicts: drivers/pci/pcie/Makefile drivers/pci/pcie/portdrv.h |
||
![]() |
730b35e08c |
dt-bindings: i2c: add binding for Socionext SynQuacer I2C
Add a binding for the I2C controller that can be found in the Socionext SynQuacer SoC. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
![]() |
8e9ba5c48e |
Orangefs: documentation updates
Signed-off-by: Mike Marshall <hubcap@omnibond.com> |
||
![]() |
adf38bb0b5 |
HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
The low-pin-count (LPC) interface of Hip06/Hip07 accesses I/O port space of peripherals. Implement the LPC host controller driver which performs the I/O operations on the underlying hardware. We don't want to touch existing drivers such as ipmi-bt, so this driver applies the indirect-IO introduced in the previous patch after registering an indirect-IO node to the indirect-IO devices list which will be searched by the I/O accessors to retrieve the host-local I/O port. The driver config is set as a bool instead of a tristate. The reason here is that, by the very nature of the driver providing a logical PIO range, it does not make sense to have this driver as a loadable module. Another more specific reason is that the Huawei D03 board which includes Hip06 SoC requires the LPC bus for UART console, so should be built in. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Zou Rongrong <zourongrong@huawei.com> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rob Herring <robh@kernel.org> # dts part |
||
![]() |
402cb8dda9 |
fscache: Attach the index key and aux data to the cookie
Attach copies of the index key and auxiliary data to the fscache cookie so that: (1) The callbacks to the netfs for this stuff can be eliminated. This can simplify things in the cache as the information is still available, even after the cache has relinquished the cookie. (2) Simplifies the locking requirements of accessing the information as we don't have to worry about the netfs object going away on us. (3) The cache can do lazy updating of the coherency information on disk. As long as the cache is flushed before reboot/poweroff, there's no need to update the coherency info on disk every time it changes. (4) Cookies can be hashed or put in a tree as the index key is easily available. This allows: (a) Checks for duplicate cookies can be made at the top fscache layer rather than down in the bowels of the cache backend. (b) Caching can be added to a netfs object that has a cookie if the cache is brought online after the netfs object is allocated. A certain amount of space is made in the cookie for inline copies of the data, but if it won't fit there, extra memory will be allocated for it. The downside of this is that live cache operation requires more memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Anna Schumaker <anna.schumaker@netapp.com> Tested-by: Steve Dickson <steved@redhat.com> |
||
![]() |
1401b579fa |
media: extended-controls.rst: transmitter -> receiver
V4L2_CID_DV_RX_POWER_PRESENT refers to a receiver, not a transmitter. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> |
||
![]() |
cccc41fd3e |
media: media-types.rst: rename media-entity-type to media-entity-functions
The MEDIA_ENT_F_* defines refer to functions, not types. Update the documentation accordingly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> |
||
![]() |
793d2a9e3d |
media: media-ioc-g-topology.rst: fix 'reserved' sizes
The size of the reserved arrays in the documentation is wrong. Sync this with the actual header. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> |
||
![]() |
a54f2d9867 |
media: pixfmt-v4l2.rst: fix types
The v4l2_pix_format documentation still had 'enum's as types. Replace by __u32 and add a reference to the enum. Also put ycbcr_enc and hsv_enc in a union. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> |
||
![]() |
54f6735abe |
media: pixfmt-v4l2-mplane.rst: fix types
The v4l2_pix_format_mplane documentation still had 'enum's as types. Replace by __u8 and add a reference to the enum. Also put ycbcr_enc and hsv_enc in a union. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> |
||
![]() |
eed5756519 |
media: doc: fix ReST link syntax
There is a ':' in excess, resulting in an unwanted ':' in the rendered output. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> |
||
![]() |
7c7055c7c5 |
dt-bindings: stm32-dma: introduce DMA features bitfield
This bitfield intends to address features to be activated within the driver. Initially the mask was only meant for FIFO Threshold management. Backward compatibility is preserved but the meaning of this field has been extended to features instead of only threshold. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> |
||
![]() |
a0b007e1ef |
dt-bindings: rcar-dmac: Document r8a77470 support
Renesas RZ/G SoC also have the R-Car gen2/3 compatible DMA controllers. Document RZ/G1C (also known as R8A77470) SoC bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com> |
||
![]() |
dd0980226f |
orangefs: document package install and xfstests procedure
Unless one is working on the userspace code, there's no need to compile OrangeFS. The package works just fine. (But leave the documentation for building from source since not everyone uses distributions which include the package.) Also document the process to run xfstests against OrangeFS. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> |
||
![]() |
a23867f1d2 |
Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: "Nothing too interesting. The biggest change is refcnting fix for ata_host - the bug is recent and can only be triggered on controller hotplug, so very few are hitting it. There also are a number of trivial license / error message changes and some hardware specific changes" * 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits) ahci: imx: add the imx8qm ahci sata support libata: ensure host is free'd on error exit paths ata: ahci-platform: add reset control support ahci: imx: fix the build warning ata: add Amiga Gayle PATA controller driver ahci: imx: add the imx6qp ahci sata support ata: change Tegra124 to Tegra ata: ahci_tegra: Add AHCI support for Tegra210 ata: ahci_tegra: disable DIPM ata: ahci_tegra: disable devslp for Tegra124 ata: ahci_tegra: initialize regulators from soc struct ata: ahci_tegra: Update initialization sequence dt-bindings: Tegra210: add binding documentation libata: add refcounting to ata_host pata_bk3710: clarify license version and use SPDX header pata_falcon: clarify license version and use SPDX header pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command() pata_macio: Delete an error message for a failed memory allocation in two functions pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe() sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start() ... |
||
![]() |
ef1c4a6fa9 |
media updates for v4.17-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaw1yeAAoJEAhfPr2O5OEVDDgQAIYpin6obedJOm7zIm741Q0S fS2FL2pygyvHlVtU20ERHgvM6aD5tujekpDM4+GNgnq0aAabxvqBvdohmHQjyVSw FgszgY6kQSnI8S4Oy9RB8H/MFRq7Wz9Qf+KmJh0SfuUoMzBe2A40yLjYQ+sAMJr9 mm0ijxxRpFYikVtIBgKDbjnx6wdkOs12M7YlJuI8N/tMBHMt+p2EfvqcX6GF725i sgLGcMsTJr1sUSyY8vnM2pAlKfZL2tZqigx5f9sB4UM7uHSw/oL/a/8I+t6Mju1X J1BD3L7UtTpwqO9sAR5BsJQ+0pAkXNOF+eLGs2p9rx4sO0DOLKoUptMI+YryvE86 /SOlTskSSAeX/rBFyZJw1zv0/9mdGrHoyCy0q/lfDkD/mQkrUJDDZ7GPLqZ9rLUe 2cXn1xMWB/soeR70oTyew0D2SZkp6y4DQr0Rwje7V8/SOWMmJvhaVIWhVIP9ZrS6 AvCS7WUYTTVIX+td2glnLkJ5SaXXJyRYv8Utp/TUrYvCFOX7wsk7F0pRY4PE4PeZ BL7Bl8H9l3HGWWhdqPvw+ETdJgcbq/IwVUcpuuEPjkhDZEqHz//vzwoPt1nT4v6M gfqfaW5LaYuj0MYYqyxZMDwP3FWk4SsQ0NZzmaFs+yfE17bcWUMuf3ZVJtjmLxzk RUo0E/7RZsrw7LkCy0KF =bzhS -----END PGP SIGNATURE----- Merge tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new CEC pin injection code for testing purposes - DVB frontend cxd2099 promoted from staging - new platform driver for Sony cxd2880 DVB devices - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x, tw9910.c - removal of unused cx18 and ivtv alsa mixers - the reneseas-ceu driver doesn't depend on soc_camera anymore and moved from staging - removed the mantis_vp3028 driver, unused since 2009 - s5p-mfc: add support for version 10 of the MSP - added a decoder for imon protocol - atomisp: lots of cleanups - imx074 and mt9t031: don't depend on soc_camera anymore, being promoted from staging - added helper functions to better support DVB I2C binding - lots of driver improvements and cleanups * tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits) media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd) media: fimc-capture: get rid of two warnings media: dvb-usb-v2: fix a missing dependency of I2C_MUX media: uvc: to the right check at uvc_ioctl_enum_framesizes() media: cec-core: fix a bug at cec_error_inj_write() media: tda9840: cleanup a warning media: tm6000: avoid casting just to print pointer address media: em28xx-input: improve error handling code media: zr364xx: avoid casting just to print pointer address media: vivid-radio-rx: add a cast to avoid a warning media: saa7134-alsa: don't use casts to print a buffer address media: solo6x10: get rid of an address space warning media: zoran: don't cast pointers to print them media: ir-kbd-i2c: change the if logic to avoid a warning media: ir-kbd-i2c: improve error handling code media: saa7134-input: improve error handling media: s2255drv: fix a casting warning media: ivtvfb: Cleanup some warnings media: videobuf-dma-sg: Fix a weird cast soc_camera: fix a weird cast on printk ... |
||
![]() |
147a89bc71 |
Kconfig updates for v4.17
- improve checkpatch for more precise Kconfig code checking - clarify effective selects by grouping reverse dependencies in help - do not write out '# CONFIG_FOO is not set' from invisible symbols - make oldconfig as silent as it should be - rename 'silentoldconfig' to 'syncconfig' - add unit-test framework and several test cases - warn unmet dependency of tristate symbols - make unmet dependency warnings readable, removing false positives - improve recursive include detection - use yylineno to simplify the line number tracking - misc cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaw6i1AAoJED2LAQed4NsGU7oP/Rc5DJmtQXbqONvEfVskfNzL NaQekDa4QuWRCbrAdRZM+8dlAgX76kXHd0I1LnL6XeCZ2KZ7f93zxpqBKHZAteGU Y6b06tDXiW9qIdI0wzfKB3KdZo0Jc1LELv7SMRrZ7+wFXZKmhh5M0mVX17sKrQai L3wPMqiu15ve2Ya9s8F8+PGFBZfqzhOBEzYij8YtTZWFWVEfoLDDD5YDUxQNcJrS FXO+fZH5EUpoWj+JseiIPuOKASChsyeqtwqCND444IrjqDQ0TLAyJSZJhSm+6bX3 qP/yMH0K+kMMkvKp8CCnaTfwkOJ2BZo+91Ydw1mnqLdnZ8gZndnyexrBFubIv+fJ 0KxX9IyGA+RBnwArsnF1yIoryktG3xtaR5diO2p5ztd8xgptKG+PqQfJ40DHjpu4 iZNpoVPIPh669w/Dfx033t1RZVhov8Mau2dZ5RCtpvXAAS6oRe+UmaazqUGt7O2z V8ekSNL3g7FN3YYx0awXJWzX8e3BDMOcUjRvw/SI16XBk0BdHiBMrYfnRN+e3mpy FjhzZdXajJclNwMVbUOAPaQypvbBQJjBMy0ryz05ZyTPEsmJqM+WjkPSLDppnMYT 8L3C5KSqC7WKdf1bj55YdGWyfyU0P9bCO026IClnvZNZDI/bg+3gB9ocyRfZG0sL 0Q7GJF+BixbUUQeUcejm =sKto -----END PGP SIGNATURE----- Merge tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - improve checkpatch for more precise Kconfig code checking - clarify effective selects by grouping reverse dependencies in help - do not write out '# CONFIG_FOO is not set' from invisible symbols - make oldconfig as silent as it should be - rename 'silentoldconfig' to 'syncconfig' - add unit-test framework and several test cases - warn unmet dependency of tristate symbols - make unmet dependency warnings readable, removing false positives - improve recursive include detection - use yylineno to simplify the line number tracking - misc cleanups * tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kconfig: use yylineno option instead of manual lineno increments kconfig: detect recursive inclusion earlier kconfig: remove duplicated file name and lineno of recursive inclusion kconfig: do not include both curses.h and ncurses.h for nconfig kconfig: make unmet dependency warnings readable kconfig: warn unmet direct dependency of tristate symbols selected by y kconfig: tests: test if recursive inclusion is detected kconfig: tests: test if recursive dependencies are detected kconfig: tests: test randconfig for choice in choice kconfig: tests: test defconfig when two choices interact kconfig: tests: check visibility of tristate choice values in y choice kconfig: tests: check unneeded "is not set" with unmet dependency kconfig: tests: test if new symbols in choice are asked kconfig: tests: test automatic submenu creation kconfig: tests: add basic choice tests kconfig: tests: add framework for Kconfig unit testing kbuild: add PYTHON2 and PYTHON3 variables kconfig: remove redundant streamline_config.pl prerequisite kconfig: rename silentoldconfig to syncconfig kconfig: invoke oldconfig instead of silentoldconfig from local*config ... |
||
![]() |
3b24b83763 |
Kbuild updates for v4.17
- add a shell script to get Clang version - improve portability of build scripts - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code - rename built-in.o which is now thin archive to built-in.a - process clean/build targets one by one to get along with -j option - simplify ld-option - improve building with CONFIG_TRIM_UNUSED_KSYMS - define KBUILD_MODNAME even for objects shared among multiple modules - avoid linking multiple instances of same objects from composite objects - move <linux/compiler_types.h> to c_flags to include it only for C files - clean-up various Makefiles -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaw6eWAAoJED2LAQed4NsGrK8QAJmbYg83TTNoOgQRK/7Lg+sj KL1+RGFxmdHRVOqG5n18L7Q4LmTD19tUFNQImrQTTrKrbH2vbMSTF2PfzdmDRwMz R5vW5+wsagfhSttOce/GR4p9+bM9XEclzEa3liqNVQxijOFXmkV14pn0x5anYfeB ABthxFFHcVn3exP/q3lmq048x1yNE71wUU5WQIWf6V/ZKf+++wQU8r7HpnATWYeO vtf8gZq+xyLLjhxoJF6n6olSZXI7Yhz4jV2G68/VroS312AUFWPogK+cSshWGlSw zGixM1q55oj9CXjZ37nR6pTzQhSZLf/uHX5beatlpeoJ4Hho6HlIABvx2oEnat7b o5RW64RB0gVJqlYZdKxL29HNrovr9tlWPTaIPGFRvWDpl3c1w+rMKXE+5hwu8jMJ 2jgxd5FZCgBaDsAKojmeQR7PAo2ffAdUO0Dj/SuAaMOpuHWHcnJk9kIN2PUrC+Sf d/H2soT9x+60KbQmtCEo5VfEN8bvNP3+ZSnadEG/gRN2IIa5FZAUQykU+i50gAvj tuKAokdRGZHvXM+buYFBfN6RbhVCXzBF/fAG7r37QVR2u1zaUszmgFOUqERhTQfm RNnyeAs9G9rljtna/AD7cIOdKTg8oETPISxt8Y6EzNMpI8PhF0aGoxso3yD19oH1 M+fq55RigsR48Kic40hY =N5BL -----END PGP SIGNATURE----- Merge tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add a shell script to get Clang version - improve portability of build scripts - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code - rename built-in.o which is now thin archive to built-in.a - process clean/build targets one by one to get along with -j option - simplify ld-option - improve building with CONFIG_TRIM_UNUSED_KSYMS - define KBUILD_MODNAME even for objects shared among multiple modules - avoid linking multiple instances of same objects from composite objects - move <linux/compiler_types.h> to c_flags to include it only for C files - clean-up various Makefiles * tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits) kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h> kbuild: clean up link rule of composite modules kbuild: clean up archive rule of built-in.a kbuild: remove partial section mismatch detection for built-in.a net: liquidio: clean up Makefile for simpler composite object handling lib: zstd: clean up Makefile for simpler composite object handling kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a kbuild: rename real-objs-y/m to real-obj-y/m kbuild: move modname and modname-multi close to modname_flags kbuild: simplify modname calculation kbuild: fix modname for composite modules kbuild: define KBUILD_MODNAME even if multiple modules share objects kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi kbuild: Use ls(1) instead of stat(1) to obtain file size kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS kbuild: move include/config/ksym/* to include/ksym/* kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module kbuild: restore autoksyms.h touch to the top Makefile kbuild: move 'scripts' target below kbuild: remove wrong 'touch' in adjust_autoksyms.sh ... |
||
![]() |
4608f06453 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
Pull sparc updates from David Miller: 1) Add support for ADI (Application Data Integrity) found in more recent sparc64 cpus. Essentially this is keyed based access to virtual memory, and if the key encoded in the virual address is wrong you get a trap. The mm changes were reviewed by Andrew Morton and others. Work by Khalid Aziz. 2) Validate DAX completion index range properly, from Rob Gardner. 3) Add proper Kconfig deps for DAX driver. From Guenter Roeck. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: sparc64: Make atomic_xchg() an inline function rather than a macro. sparc64: Properly range check DAX completion index sparc: Make auxiliary vectors for ADI available on 32-bit as well sparc64: Oracle DAX driver depends on SPARC64 sparc64: Update signal delivery to use new helper functions sparc64: Add support for ADI (Application Data Integrity) mm: Allow arch code to override copy_highpage() mm: Clear arch specific VM flags on protection change mm: Add address parameter to arch_validate_prot() sparc64: Add auxiliary vectors to report platform ADI properties sparc64: Add handler for "Memory Corruption Detected" trap sparc64: Add HV fault type handlers for ADI related faults sparc64: Add support for ADI register fields, ASIs and traps mm, swap: Add infrastructure for saving page metadata on swap signals, sparc: Add signal codes for ADI violations |
||
![]() |
5bb053bef8 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including <linux/version.h> Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ... |
||
![]() |
bb2407a721 |
There's been a fair amount of activity in Documentation/ this time around:
- Lots of work aligning Documentation/ABI with reality, done by Aishwarya Pant. - The trace documentation has been converted to RST by Changbin Du - I thrashed up kernel-doc to deal with a parsing issue and to try to make the code more readable. It's still a 20+-year-old Perl hack, though. - Lots of other updates, typo fixes, and more. -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEEUOvtSCFqLxY/7px3jc41VjAi5XoFAlrCPGYPHGNvcmJldEBs d24ubmV0AAoJEI3ONVYwIuV6izAP/1DpGfBdnrG4TZkCf+qQHT19ZluwGm+wOBF4 +7qa6It4BL4PbSmSSZx79yZIpeSL96codCWMFSrud71WzOzfCtidyzOduuqvEluJ 3Fhl+hxyDYDQGpPt4y7rPbjh23dliXHFzYycfsFn7H9Gj4MX74c6ktRlPUwIgR/D YFyE2jEKUU/2wblpZgcGdS49AUZAWiC9kS2Z9lSrIswcy+G2eZ1qUfbX60tge0op nLKWlWwv2hTO0KnYJebdHwQsRe5DkW9smPiG1fsCX5CUT1auZY9FVK3KS2AUVxia vilpUZrjEzuSa1EKWcflpmR/RuZ37a3fhc+cDoHrnCDp5FxOkdGp035Tx0/mgIDv I7TrUJzt+jawdVo7fMbsDcSmd12Dmsl16knVN4WXSfD1JUiTZNAIEnEH4fF5fsIF nvASedA9rsRRvMYEqqFIAPFJxdmfm3mWBKpOVhQyyAT3/T+vR1+rr6pGmThjHL09 DZUCiPpdFqZZ8fhNZQxjQvbIkZFHLCrl1zNENlEPtvOXGZfNTdcag2mA87n4JVfp gCf1TuEvQ/aCMSL5V7aS3exXeaq1Xe+1P4+JOhY/Rv1SbI1JopChvO8z3ElHsKzN x+0UBYDjXSeD5LS0lCBytKo3IZLJAxabSLK4eMLdVr60kNi3c3cgtlUjNx+LTRVu tr7nWWLY =QQ/a -----END PGP SIGNATURE----- Merge tag 'docs-4.17' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "There's been a fair amount of activity in Documentation/ this time around: - Lots of work aligning Documentation/ABI with reality, done by Aishwarya Pant. - The trace documentation has been converted to RST by Changbin Du - I thrashed up kernel-doc to deal with a parsing issue and to try to make the code more readable. It's still a 20+-year-old Perl hack, though. - Lots of other updates, typo fixes, and more" * tag 'docs-4.17' of git://git.lwn.net/linux: (82 commits) Documentation/process: update FUSE project website docs: kernel-doc: fix parsing of arrays dmaengine: Fix spelling for parenthesis in dmatest documentation dmaengine: Make dmatest.rst indeed reST compatible dmaengine: Add note to dmatest documentation about supported channels Documentation: magic-numbers: Fix typo Documentation: admin-guide: add kvmconfig, xenconfig and tinyconfig commands Input: alps - Update documentation for trackstick v3 format Documentation: Mention why %p prints ptrval COPYING: use the new text with points to the license files COPYING: create a new file with points to the Kernel license files Input: trackpoint: document sysfs interface xfs: Change URL for the project in xfs.txt char/bsr: add sysfs interface documentation acpi: nfit: document sysfs interface block: rbd: update sysfs interface Documentation/sparse: fix typo Documentation/CodingStyle: Add an example for braces docs/vm: update 00-INDEX kernel-doc: Remove __sched markings ... |
||
![]() |
cc5ada7ca3 |
Mostly small changes, as usual.
This does add an IPMI BMC server-side driver, to allow a Linux system to act as an IPMI controller. That's the biggest change, but it is just a new driver that is fairly narrow in use. The other largish change is removing ACPI SPMI probe support, which should have never really been there in the beginning. -corey -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaw8XOAAoJEGHzjJCRm/+BeoQQAIBokkgHSAl6y8jlmmTmu9fV gXl0GT97yAMyuTUaTvkWLdWm8GWCrSSUTAqjbcTzMWya87KRODsUg9eTO58fFw8m ODbD7ruTGmBQggJEqDaS5NHAiU22ce2aDn5I0WjJkH8vaJ3nQSa6nEgBOzXDMC1A OmaVQE6BnEAIA+nmlzbUgcuduB3iv7gTua2gy7MQSG/5jBPIAOQtpsgHtCZMA+Dt bk9LqDpOa6dZry7eIn5/u62YRVLX+iVO/DoxCgZyOxVfgnV/ykKT3PvWO9vviBQV QXXLAzLO3niDQ/ZwwpqrUWjR7oGWDKe4ntMATfnxCP7LQNrSF7LnAxz8oCcwuBxq ELrwME8LEQmMYGFg3SYcLA0k1teTP2UVWURUH6zBTft2xzo8bJN0JU7J52tTL4xa yC7JgTVeq8uQB8gkYKf43LGHlXlaxFQsnRKeCJ2JG+1yD+sOmxbZshfiLroMZ5DM nPKOuMdoqPCd7JVUMs/c0IgcDHd6vtkiDRA0jh38JdIdp9B/i+dFYs61bSzrkBD9 tXUua56QTVl5WEWy2lGX+ZH/JUJbQnTxjiaW99Q9Soml6qXqIVjR5ZvLtls0PeW0 ZytaQEGuV8758YEmOGk/1pUys/oC37mDlyjTpONGYzvAyzJqU258/YU9eJMkcQ/G FFEEkWILLuGgtFnyxwN/ =p993 -----END PGP SIGNATURE----- Merge tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "Mostly small changes, as usual. This does add an IPMI BMC server-side driver, to allow a Linux system to act as an IPMI controller. That's the biggest change, but it is just a new driver that is fairly narrow in use. The other largish change is removing ACPI SPMI probe support, which should have never really been there in the beginning" * tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi: ipmi/parisc: Add IPMI chassis poweroff for certain HP PA-RISC and IA-64 servers ipmi_ssif: Fix kernel panic at msg_done_handler ipmi:pci: Blacklist a Realtek "IPMI" device ipmi: Remove ACPI SPMI probing from the system interface driver ipmi: Remove ACPI SPMI probing from the SSIF (I2C) driver ipmi: missing error code in try_smi_init() ipmi: use ARRAY_SIZE for poweroff_functions array sizing calculation ipmi: Consolidate cleanup code ipmi: Remove some unnecessary initializations ipmi: Fix some error cleanup issues ipmi: Add or fix SPDX-License-Identifier in all files ipmi: Re-use existing macros for built-in properties ipmi:pci: Make the PCI defines consistent with normal Linux ones ipmi: kcs_bmc: coding-style fixes and use new poll type char/ipmi: add documentation for sysfs interface ipmi: kcs_bmc: mark expected switch fall-through in kcs_bmc_handle_data ipmi: add an Aspeed KCS IPMI BMC driver ipmi: add a KCS IPMI BMC driver |
||
![]() |
77624cd2a7 |
Pin control bulk changes for the v4.17 kernel cycle:
New drivers: - Qualcomm SDM845: this is their new flagship SoC platform which seems to be targeted at premium mobile handsets. - Renesas R-Car M3-N SoC. - Renesas R8A77980 SoC. - NXP (ex Freescale) i.MX 6SLL SoC. - Mediatek MT2712 SoC. - Allwinner H6 SoC. Improvements: - Uniphier adds a few new functions and pins. - Renesas refactorings and additional pin definitions. - Improved pin groups for Axis Artpec6. Cleanup: - Drop the TZ1090 drivers. This platform is no longer maintained and is being deleted. - Drop ST-Ericsson U8540/U9540 support as this was never productified. - Overall minor fixes and janitorial. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJawz1oAAoJEEEQszewGV1zWUUQAJEIXW0vEsgwwFCIQYrKZBbi ovfQtpPgv5wbRmvLy/IaIFvO7eFedlOqjLTU0a3wuFZdHn9y0VkebVOjdG97TTeF g4fyqQ7pzdCKmxlDMm4zcOUycho9ZMa8lG3tKdyxI4tal6ygl81BypzKVi/WIxLA po2Vr1MHfKicWyPbgD1VRJV6oSzXSOMFkEcPUqx+6m5OM/GTKTKasU/fa4uu12jI OHF1TVr9glMbPiU0wC8bvKilgXCxhDYMYf1JCaxojr0Rt/DlR2vBgbfU7dIeRtO1 MJ1nyJm0yZQfN/bBV1roSg/GGRS3jGbdHDzMnK8pI6LJNJYRa6vfLD/NHKUciSnf 5cgpWloyvR+rbfObr6CYTirKE7iGBYvAH+do2TwmfvfwUYOI9lnbJrtnqtIovdVA R5FxrvI/Ol/j2t4V5wZGC1BBDsC6GH/1YV+W+n9fwKMdDIRgEsOTFsCNEWmSShWP Z53NzyZRVL32RK35g3WEqicfXOtmw3XXuHJZqWjlmXyVitEElMAVWySd6oG0HhvU sdRaoVGjXL9EVM3iZrqHtaRazRjItBA2CFnloC1PVjwi+dkHDcwWDvtOur+AF3wz VORi0xlWXd0Gzolo/ccsk7JUVmrkfCDnZx9uiTKQ+jgiSDfoEuQOvBfTI6LdeoNY upTZIfEhR/dMcjcdKIKe =IT6S -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "New drivers: - Qualcomm SDM845: this is their new flagship SoC platform which seems to be targeted at premium mobile handsets. - Renesas R-Car M3-N SoC. - Renesas R8A77980 SoC. - NXP (ex Freescale) i.MX 6SLL SoC. - Mediatek MT2712 SoC. - Allwinner H6 SoC. Improvements: - Uniphier adds a few new functions and pins. - Renesas refactorings and additional pin definitions. - Improved pin groups for Axis Artpec6. Cleanup: - Drop the TZ1090 drivers. This platform is no longer maintained and is being deleted. - Drop ST-Ericsson U8540/U9540 support as this was never productified. - Overall minor fixes and janitorial" * tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: uniphier: add UART hardware flow control pin-mux settings pinctrl: sunxi: add support for the Allwinner H6 main pin controller pinctrl: sunxi: change irq_bank_base to irq_bank_map pinctrl: sunxi: introduce IRQ bank conversion function pinctrl: sunxi: refactor irq related register function to have desc pinctrl: msm8998: Remove owner assignment from platform_driver pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings pinctrl/amd: poll InterruptEnable bits in enable_irq pinctrl: ocelot: fix gpio direction pinctrl: mtk: fix check warnings. pintcrl: mtk: support bias-disable of generic and special pins simultaneously pinctrl: add mt2712 pinctrl driver pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0 pinctrl: imx: Add pinctrl driver support for imx6sll dt-bindings: imx: update pinctrl doc for imx6sll pinctrl: intel: Implement intel_gpio_get_direction callback pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency pinctrl: mediatek: mtk-common: use true and false for boolean values pinctrl: sunxi: always look for apb block ... |
||
![]() |
dc73d6a8d4 |
MMC core:
- Export host capabilities through debugfs - Export card RCA register via sysfs - Improve card initializing sequence while enabling 4-bit bus - Export a function to enable/disable wakeup for card detect IRQ MMC host: - dw_mmc: Add support for new hi3798cv200 variant - dw_mmc: Remove support for some deprecated DT properties - mediatek: Add support for new variant used on MT7622 SoC - sdhci: Improve wakeup support for SDIO IRQs - sdhci: Improve wakeup support for card detect IRQs - sdhci-omap: Add tuning support - sdhci_omap: Add UHS-I mode support - sunxi: Prepare for runtime PM support via a few re-factorings - tmio: deprecate "toshiba,mmc-wrprotect-disable" DT property - tmio/renesas_sdhi: Consolidate code supporting write protect - tmio: Improve DMA vs PIO handling - tmio: Add support for IP-builtin card detection logic -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaw0MuAAoJEP4mhCVzWIwpW78P/2N2qPt21OfvnIbSexY1nyPd 5+rjScgy+oTUnNxITA9LOnM4P6Wg/9PgvhjUdNdHzd5ZaXIchw372+Xu6hZHdujI vBfnpsI/xtyL1TQ6nvJc9b+Sp4W4LL2MlCqxi+btAKLvTAU3NNm7uJRRP6xRNDd5 8wcsCoIN4C3k5hmh5++DDLCfuzpwmbC1cEbGtL/QEV9xeCY5+fJq4Qpq14L2TJ0g LeDls3X4HAJa3SsgSGOdNr8rttKUSS+j7i1XsShHMyq89DD21PJ8fvMhdzlXJub9 A4PatcOXALS/Xd2YVjeLHrRRlTitssD+Sllt46NsB4eJJOO+DempecY+i0WoW60y p9IUSSX86yokGoyweiL2GI0Ja1Bg8xgdzTGVbfZ6w6UKHjQAcItnojyMghDM5+zt VjDIU59rzm+BEDqcktsbGgLPjOZ0ZWgJPPp2NPkechxsojvCJ9Smm6yPjzaUnZ60 U9PxsYbs4NB+nE9iKDioyA1ABP0N+BloUkTf/cVHdPBBPMmOyI7jYEDS7mqollZU bQCFx+BqcQMbnvI/TZxNDTr4HsiyiXJa0GTCB77sge8tZdcUTjUsWyhc+BYpIqgA 68/dlwTcawSXDliup5XxtYcAjGugtHbPnS/39uBXvscqWVej1WI5RTyzKdC/hnos BP5uz0K1Wic1Dl+jqlWc =2Pd6 -----END PGP SIGNATURE----- Merge tag 'mmc-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Export host capabilities through debugfs - Export card RCA register via sysfs - Improve card initializing sequence while enabling 4-bit bus - Export a function to enable/disable wakeup for card detect IRQ MMC host: - dw_mmc: Add support for new hi3798cv200 variant - dw_mmc: Remove support for some deprecated DT properties - mediatek: Add support for new variant used on MT7622 SoC - sdhci: Improve wakeup support for SDIO IRQs - sdhci: Improve wakeup support for card detect IRQs - sdhci-omap: Add tuning support - sdhci_omap: Add UHS-I mode support - sunxi: Prepare for runtime PM support via a few re-factorings - tmio: deprecate "toshiba,mmc-wrprotect-disable" DT property - tmio/renesas_sdhi: Consolidate code supporting write protect - tmio: Improve DMA vs PIO handling - tmio: Add support for IP-builtin card detection logic" * tag 'mmc-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (55 commits) mmc: renesas_sdhi: replace EXT_ACC with HOST_MODE mmc: update sdio_claim_irq documentation mmc: Export host capabilities to debugfs. mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards mmc: block: fix updating ext_csd caches on ioctl call mmc: sunxi: Set our device drvdata earlier mmc: sunxi: Move the reset deassertion before enabling the clocks mmc: sunxi: Move resources management to separate functions mmc: dw_mmc: add support for hi3798cv200 specific extensions of dw-mshc dt-bindings: mmc: add bindings for hi3798cv200-dw-mshc mmc: core: Export card RCA register via sysfs mmc: renesas_sdhi: fix WP detection mmc: core: Use memdup_user() rather than duplicating its implementation mmc: dw_mmc-rockchip: correct property names in debug mmc: sd: Remove redundant err assignment from mmc_read_switch mmc: sdio: Check the return value of sdio_enable_4bit_bus mmc: core: Don't try UHS-I mode if 4-bit mode isn't supported arm64: dts: hi3660: remove 'num-slots' property for dwmmc ARM: dts: lpc18xx: remove 'num-slots' property for dwmmc arm64: dts: stratix10: remove 'num-slots' property for dwmmc ... |
||
![]() |
3ac684b881 |
power supply and reset changes for the v4.17 series
* Microsemi Ocelot reset support * Spreadtrum SC27xx reset support * generic gpio charger: lot's of cleanups * axp20x fuel gauge: add AXP813 support * misc. fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlrCZVQACgkQ2O7X88g7 +ppKgQ/8Cmgfta6nX5N8U3jAbBmduFkxmV+WaVE2yMned7ABL5ZAXBOBIDXW0Cvk yFNhu4fgpb2tDW/NEsYiyu61ES7F4W+q0AlvTNaPcM4oh+j8+E3B8C26qUaojw7E rB5FrRJA7/1RQeBl8RrWplT3bmYyL8qPrEca3hPPrrVPYsvf7TqJlgJRqOEu5bIG GBcU+aPZsd6T0u3SloErm0LL9Q4S6YpuW/gqR69azcQUacfalA7kjZ5gpiN9YXYq xSsm3zoJl77x4HTAnKN+7Kzyl3gugKJXIN8kN19F9iYwpc3ccii9FROrx7T3trps nUojvRorlZHawwAOYxp/6C21u6N7SXZ+TyVnPWgjP24Fr7DI5OxqWEZ8fZqaN7M4 nNjhZYpquJDwgg63E1WoA3aPOUCQp7ZLz2xKUWuwX6n1zXr/R3qVeguFPORvhp9Q uu9nfoZXo5ThVz5JK5eGP7pE1OU/qpnzF2ZLHyeNULjAJcnxQjNzN2nTG35IxiO0 BKlYmy31GcMwooRqarJrKavzMU1xGKZtIGxOm6uIluqA1cGfH+8ahk84tzLgYAZ4 4MYnPjDyR31gzt9AB3eb7wGo+TP7djnIzeooeyz8Q71oNcCx263QgrmaKcPZjQtm QcLA+/jyGNg0T5t6l2Kj7mLKNdiGb6bHMqMs5KrezTruJcDhlRg= =VY8H -----END PGP SIGNATURE----- Merge tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Microsemi Ocelot reset support - Spreadtrum SC27xx reset support - generic gpio charger: lot's of cleanups - axp20x fuel gauge: add AXP813 support - misc fixes, including one devicetree change for the Nokia N900, that has been Acked-by Tony Lindgren * tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (27 commits) power: reset: at91-reset: Switch from the pr_*() to the dev_*() logging functions power: reset: at91-poweroff: Remove redundant dev_err call in at91_poweroff_probe() power: reset: at91-poweroff: Switch from the pr_*() to the dev_*() logging functions power: reset: make function sc27xx_poweroff_shutdown static power: supply: da9150-fg: remove VLA usage ARM: dts: omap3-n900: Add link between battery and charger power: supply: bq2415x: add DT referencing support power: supply: bq27xxx: support missing supplier device max17042: propagate of_node to power supply device power: supply: axp288_fuel_gauge: Fix full status reporting power: supply: axp288_fuel_gauge: Do not register FG on ECS EF20EA power: reset: gpio-poweroff: Support for timeout from device property dt-bindings: power: reset: gpio-poweroff: Add 'timeout-ms' property power: reset: Add Spreadtrum SC27xx PMIC power off support power: supply: axp20x_battery: add support for AXP813 dt-bindings: power: supply: axp20x: add AXP813 battery DT binding power: supply: axp20x_battery: use data struct for variant specific code power: supply: gpio-charger: Remove pdata from gpio_charger power: supply: gpio-charger: Use GPIOF_ACTIVE_LOW for legacy setup power: supply: gpio-charger: Remove redundant dev_err call in probe function ... |
||
![]() |
75dcc7ef95 |
spi: SPI updates for v4.17
A quiet release for SPI, some fixes and small updates for individual drivers with one bigger change from Linus Walleij which coverts the bitbanging SPI driver to use the GPIO descriptor API from Linus Walleij. Since GPIO descriptors were used by platform data this means there's a few changes in arch/ making relevant updates for a few platforms and one misc driver that are affected. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrCYDYTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0DXhB/9Hueo2D1Pku0iAwq+yIAPvk2N0fyGP YWJWbDQGngSZEnU3dUzdfaOHh4MMiMgs0q8hxOYnmkIhhTs7cXsPj8x6rlZP8bee TtSEEgHSuHlVWyADquFIel8OCq8BWd7p4aQKqP3LaojCH/wqswxtn4I+RH/xw1Rd LIPgU12fxGUpRMO7uGNiMhqqkQDH1ZBFzCUYRPqQk2E+5hyZraQYoROgZkEBPzb1 EWjLxLxytj/Zj4N5eQkW4BWfX5HKJb9CpwKIIdyNuybr14yC5FR83VxOf9wW4/pG 39DIn8LtGTkuMRF4Yw5rPlC9KqnLpUDTnQCcOW4lt+z8QtZQ+LP3boxE =xNln -----END PGP SIGNATURE----- Merge tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull SPI updates from Mark Brown: "A quiet release for SPI, some fixes and small updates for individual drivers with one bigger change from Linus Walleij which coverts the bitbanging SPI driver to use the GPIO descriptor API from Linus Walleij. Since GPIO descriptors were used by platform data this means there's a few changes in arch/ making relevant updates for a few platforms and one misc driver that are affected" * tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (24 commits) MAINTAINERS: update Andi's e-mail spi: spi-atmel: Use correct enum for DMA transfer direction spi: sh-msiof: Document R-Car M3-N support spi: sh-msiof: Use correct enum for DMA transfer direction spi: sprd: Add the support of restarting the system spi: sprd: Simplify the transfer function spi: Fix unregistration of controller with fixed SPI bus number spi: rspi: use correct enum for DMA transfer direction spi: jcore: disable ref_clk after getting its rate spi: bcm-qspi: fIX some error handling paths spi: pxa2xx: Disable runtime PM if controller registration fails spi: tegra20-slink: use true and false for boolean values spi: Fix scatterlist elements size in spi_map_buf spi: atmel: init FIFOs before spi enable spi: orion: Prepare space for per-child options spi: orion: Make the error message greppable spi: orion: Rework GPIO CS handling spi: bcm2835aux: Avoid 64-bit arithmetic in xfer len calc spi: spi-gpio: Augment device tree bindings spi: spi-gpio: Rewrite to use GPIO descriptors ... |
||
![]() |
843f38d382 |
dm verity: add 'check_at_most_once' option to only validate hashes once
This allows platforms that are CPU/memory contrained to verify data blocks only the first time they are read from the data device, rather than every time. As such, it provides a reduced level of security because only offline tampering of the data device's content will be detected, not online tampering. Hash blocks are still verified each time they are read from the hash device, since verification of hash blocks is less performance critical than data blocks, and a hash block will not be verified any more after all the data blocks it covers have been verified anyway. This option introduces a bitset that is used to check if a block has been validated before or not. A block can be validated more than once as there is no thread protection for the bitset. These changes were developed and tested on entry-level Android Go devices. Signed-off-by: Patrik Torstensson <totte@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
![]() |
b51c4354df |
regulator: Updates for v4.17
A very small set of updates for the regulator API this time around, there's a few bug fixes and also: - Conversion of the regulator API to use GPIO descriptors rather than numbers from Linus Walleij. - New drivers for Marvell 88PG86x and Qualcomm PM8998 and PMI8998. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrCWysTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0GRNB/46x233PDi9o0GWsVYyCy5BLwINq9xC K1pPNoTWN9BS6VkDwaQIXOXS0qIjf5OCMCFLcAc1wncGVQDEUUNb8ndDYb+zLksn Ra5n8vX5qmWHdZHyecy8gFqHzLbsNUvR0E62vtghsGSuM2EeKNcHOCnd852TkcF6 Bh9GKHXIDvQcos1bHBTbkRfb/CM4uF9rzN38NdTiyxYVqvhdBbo4h33tcuKHrvHn vO3tkrnhUvDdX9YNbhIal/qecouX3KsZZuLdHt/l8ygSx2eoVEzdoA9uyvU9rywe FZkc45DIYYH7Yz+faFHVRMU4oBN8jwalVjlGTWBD8Iyje+BT2w0eFUCJ =/rLA -----END PGP SIGNATURE----- Merge tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A very small set of updates for the regulator API this time around, there's a few bug fixes and also: - Conversion of the regulator API to use GPIO descriptors rather than numbers from Linus Walleij. - New drivers for Marvell 88PG86x and Qualcomm PM8998 and PMI8998" * tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom: smd: Add pm8998 and pmi8998 regulators regulator: core: Add missing blank line between functions regulator: qcom_smd: Drop regulator/{machine,of_regulator} includes regulator: giving regulator controlling gpios a non-empty label when used through the devicetree. regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()' regulator: 88pg86x: new i2c dual regulator chip regulator: 88pg86x: add DT bindings document regulator: da9211: Pass descriptors instead of GPIO numbers regulator: da9055: Pass descriptor instead of GPIO number regulator: core: Support passing an initialized GPIO enable descriptor regulator: dt: regulator-name is required property regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()' |
||
![]() |
f2d285669a |
Power management updates for 4.17-rc1
- Modify the cpuidle poll state implementation to prevent CPUs from staying in the loop in there for excessive times (Rafael Wysocki). - Add Intel Cannon Lake chips support to the RAPL power capping driver (Joe Konno). - Add reference counting to the device links handling code in the PM core (Lukas Wunner). - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system suspend code (Rafael Wysocki). - Allow devices to be put into deeper low-power states via ACPI if both _SxD and _SxW are missing (Daniel Drake). - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a keyboard wakeup issue on Asus UX331UA (Chris Chiu). - Prevent the PCMCIA library code from aborting suspend-to-idle due to noirq suspend failures resulting from incorrect assumptions (Rafael Wysocki). - Add coupled cpuidle supprt to the Exynos3250 platform (Marek Szyprowski). - Add new sysfs file to make it easier to specify the image storage location during hibernation (Mario Limonciello). - Add sysfs files for collecting suspend-to-idle usage and time statistics for CPU idle states (Rafael Wysocki). - Update the pm-graph utilities (Todd Brandt). - Reduce the kernel log noise related to reporting Low-power Idle constraings by the ACPI system suspend code (Rafael Wysocki). - Make it easier to distinguish dedicated wakeup IRQs in the /proc/interrupts output (Tony Lindgren). - Add the frequency table validation in cpufreq to the core and drop it from a number of cpufreq drivers (Viresh Kumar). - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT bindings (Viresh Kumar). - Clean up the CPU online error code path in the cpufreq core (Viresh Kumar). - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186 cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh Kumar). - Drop memory allocation error messages from a few places in cpufreq and cpuildle drivers (Markus Elfring). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJawgTUAAoJEILEb/54YlRxI48QALc6IUfj/O+gLAWAf8qHk+8V eLn9E1NrZXUtNMNYItBcgZfuMImIj7MC5qRo/BhzYdd0VyUzFYEyd9liUVFBDEXA SH65jyjRrXORKfLrSP5H8lcCdckTFXfxzonVFN2n4l7Gdv540UFuqloU+vS4Wrfp wMg9UvKRxr+7LwOI4q2sMFtB8Uki+lySY5UECqRIKUIJKIH6RPo3m73Kps7kw8kU c2RCU8w/9PoomPaEjvwZ0vT5lNrQXmBbC5hxcMzBHtLS0Cwb3xJsUB4w6niezdGY e+n6Vx7XeId7+Ujnn4praxUwyVq2wEirJccvAEgKFcZzjmGAXrHl8rOgMLvb3ugN P+ftkYk+Vizci9hmACeA1LGw4hN/dXMfephnezCsy9Q/QK8QPJV8XO0vxfyaQYhZ ie6SKcdZimFDzqd6oHLFftRou3imvq8RUvKTx2CR0KVkApnaDDiTeP5ay1Yd+UU3 EomWe7/mxoSgJ9kB/9GlKifQXBof62/fbrWH0AdM1oliONbbOZcLqg5x4DZUmfTK hTAx3SSxMRZSlc4Zl1CzbrHnFKi9cRBYCs0tPdOSnAO2ZfCsOmokJE+ig5I8lZre SlaciUpG2Vvf7m61mVlrqLLos8T9rTVM2pqwsoxII7A+dFrWK3HpqoypEN/87tm7 4/zjPF6LK2eTKL9WdTCk =6JC2 -----END PGP SIGNATURE----- Merge tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update the cpuidle poll state definition to reduce excessive energy usage related to it, add new CPU ID to the RAPL power capping driver, update the ACPI system suspend code to handle some special cases better, extend the PM core's device links code slightly, add new sysfs attribute for better suspend-to-idle diagnostics and easier hibernation handling, update power management tools and clean up cpufreq quite a bit. Specifics: - Modify the cpuidle poll state implementation to prevent CPUs from staying in the loop in there for excessive times (Rafael Wysocki). - Add Intel Cannon Lake chips support to the RAPL power capping driver (Joe Konno). - Add reference counting to the device links handling code in the PM core (Lukas Wunner). - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system suspend code (Rafael Wysocki). - Allow devices to be put into deeper low-power states via ACPI if both _SxD and _SxW are missing (Daniel Drake). - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a keyboard wakeup issue on Asus UX331UA (Chris Chiu). - Prevent the PCMCIA library code from aborting suspend-to-idle due to noirq suspend failures resulting from incorrect assumptions (Rafael Wysocki). - Add coupled cpuidle supprt to the Exynos3250 platform (Marek Szyprowski). - Add new sysfs file to make it easier to specify the image storage location during hibernation (Mario Limonciello). - Add sysfs files for collecting suspend-to-idle usage and time statistics for CPU idle states (Rafael Wysocki). - Update the pm-graph utilities (Todd Brandt). - Reduce the kernel log noise related to reporting Low-power Idle constraings by the ACPI system suspend code (Rafael Wysocki). - Make it easier to distinguish dedicated wakeup IRQs in the /proc/interrupts output (Tony Lindgren). - Add the frequency table validation in cpufreq to the core and drop it from a number of cpufreq drivers (Viresh Kumar). - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT bindings (Viresh Kumar). - Clean up the CPU online error code path in the cpufreq core (Viresh Kumar). - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186 cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh Kumar). - Drop memory allocation error messages from a few places in cpufreq and cpuildle drivers (Markus Elfring)" * tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits) ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA cpufreq: CPPC: Use transition_delay_us depending transition_latency PM / hibernate: Change message when writing to /sys/power/resume PM / hibernate: Make passing hibernate offsets more friendly cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice ... |
||
![]() |
be55375427 |
ACPI updates for 4.17-rc1
- Update the in-kernel ACPICA code to upstream revision 20180313 including: * Module-level AML code handling fixes and simplifications (Bob Moore, Erik Schmauss). * Fixes and cleanups related to messaging (Bob Moore). * Events handling fixes related to disabling and enabling GPEs (Erik Schmauss). * Introduction of SPDX license identifiers and removal of license boilerplate in multiple files (Erik Schmauss). * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Hans de Goede, Seunghun Han). - Add new basic driver for the ACPI Time and Alarm Device (Rafael Wysocki). - Modify the ACPI battery driver to support battery thresholds on Lenovo ThinkPads (Ognjen Galic, Colin Ian King). - Avoid reporting battery capacity over 100 in the ACPI battery driver in some cases (Laszlo Toth). - Make the kernel recognize an OEM _OSI string from Dell to avoid power management issues with NVidia GPUs in Dell platforms (Alex Hung). - Make the PCI IRQ management code handle missing _PRS cleanly (Alex Hung). - Fix uevent notifications related to device hotplut (Lee, Chun-Yi). - Prevent the ACPI PAD driver from leaking memory (Lenny Szubowicz). - Update the ACPI CPPC library code to include subspace IDs in the kernel messages logged by it (George Cherian). - Add backlight quirk for Samsung 670Z5E (Hans de Goede). - Add the NFIT and HMAT tables to the list of ACPI tables that can be overridden via initrd (Dan Williams). - Fix and clean up some ACPI documentation and Kconfig help language (Aishwarya Pant, Randy Dunlap). - Replace license boilerplate with an SPDX license ID in the ACPI PMIC operation region handling code (Rajmohan Mani). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJawgRsAAoJEILEb/54YlRxZv4P/3jl22A8YfhbUVs3NOFzmQYa xDSGgFMKRt3Zh4XEfwg6sBugibs9KLNPUSc9SR2oGsPju+VAowi1LXnocylymKDW WbRbziBEOJ8v7swmrsXCuiOH5TE9VA34UsBUoyu1MvgQB0YkBK2cw8WuEDwqFNqO 2AlJkSSqLDFCDRZgVnoVgPWQCBa6xW2gjMCsZhUaF0rqxzI+iMw9ErjgUunKzOgh mbpsUk4E3TCbqomMeXj53JuZA4utG0K0oLK7hozrQUm7fWzy424cc5P4F6SMWDiK Q6TR3qPosP2Qg52qyUbjISyLcnIz+UTeT+ekJtE/vVMhc0Igwe0z45JEGk6QlxRG q6MEmlgw2DsdUtxWnXrX02bgRNtR0GHT5OIuH8vmSqLHvphQv9MNtg+FOHZWmShN EA+AMzE3bLT5EZLbkI/8xjSRPf2Lxp2S1UpvW3TAbSBbyCt71GK7t9U2eVnOU8pS sDC/uIexO/XY/ELSwyKJ3xbp032ZfcOTouI5j4TyBTB7ezng//LFqvnzGzFvYwyJ Ne/1n+W5HS2l7KMWRENQTpstk7Nr1k5GAJW6zXLTlM/oZhQ+mz0MKyxABeY2byRx wxL8LBs75jcpDxYHvHAZv8Kj3GaNfIhI1wZ24W7mwj+3s29fFiovtIJsH0S4SR4n MheLeKYCBPMHI4z388Mn =pVZ/ -----END PGP SIGNATURE----- Merge tag 'acpi-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to follow upstream revision 20180313 which includes fixes related to the so-called module-level AML (mostly "if" type of statements outside of any methods) that should improve the handling of systems that load alternative SSDTs depending on the current configuration, for example, and event handling fixes related to disabling and enabling GPEs on system startup and on suspend/resume. Moreover, the ACPICA license boilerplate is replaced with SPDX license IDs which alone reduces the number of lines of ACPICA code in the kernel quite a bit. Also added is a new driver for the generic ACPI Time and Alarm Device (TAD). At the moment it only handles the most basic capabilities of the TAD, however. In addition to that the ACPI battery driver is improved to handle battery thresholds on ThinkPads, among other things, some bugs are fixed, a new backlight quirk is added and some documentation is updated. Specifics: - Update the in-kernel ACPICA code to upstream revision 20180313 including: * Module-level AML code handling fixes and simplifications (Bob Moore, Erik Schmauss). * Fixes and cleanups related to messaging (Bob Moore). * Events handling fixes related to disabling and enabling GPEs (Erik Schmauss). * Introduction of SPDX license identifiers and removal of license boilerplate in multiple files (Erik Schmauss). * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Hans de Goede, Seunghun Han). - Add new basic driver for the ACPI Time and Alarm Device (Rafael Wysocki). - Modify the ACPI battery driver to support battery thresholds on Lenovo ThinkPads (Ognjen Galic, Colin Ian King). - Avoid reporting battery capacity over 100 in the ACPI battery driver in some cases (Laszlo Toth). - Make the kernel recognize an OEM _OSI string from Dell to avoid power management issues with NVidia GPUs in Dell platforms (Alex Hung). - Make the PCI IRQ management code handle missing _PRS cleanly (Alex Hung). - Fix uevent notifications related to device hotplut (Lee, Chun-Yi). - Prevent the ACPI PAD driver from leaking memory (Lenny Szubowicz). - Update the ACPI CPPC library code to include subspace IDs in the kernel messages logged by it (George Cherian). - Add backlight quirk for Samsung 670Z5E (Hans de Goede). - Add the NFIT and HMAT tables to the list of ACPI tables that can be overridden via initrd (Dan Williams). - Fix and clean up some ACPI documentation and Kconfig help language (Aishwarya Pant, Randy Dunlap). - Replace license boilerplate with an SPDX license ID in the ACPI PMIC operation region handling code (Rajmohan Mani)" * tag 'acpi-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits) ACPI: acpi_pad: Fix memory leak in power saving threads ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E ACPI: Add Time and Alarm Device (TAD) driver ACPI / scan: Send change uevent with offine environmental data ACPI / Kconfig: Update ACPI_PROCFS_POWER help text ACPI / OSI: Add OEM _OSI strings to disable NVidia RTD3 ACPICA: Update version to 20180313 ACPICA: Cleanup/simplify module-level code support ACPICA: Events: add a return on failure from acpi_hw_register_read ACPICA: adding SPDX headers ACPICA: Rename a global for clarity, no functional change ACPICA: macros: fix ACPI_ERROR_NAMESPACE macro ACPICA: Change a compile-time option to a runtime option ACPICA: Remove calling of _STA from acpi_get_object_info() ACPICA: AML Debug Object: Don't ignore output of zero-length strings ACPICA: Fix memory leak on unusual memory leak ACPICA: Events: Dispatch GPEs after enabling for the first time ACPICA: Events: Add parallel GPE handling support to fix potential redundant _Exx evaluations ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c ... |
||
![]() |
642e7fd233 |
Merge branch 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull removal of in-kernel calls to syscalls from Dominik Brodowski: "System calls are interaction points between userspace and the kernel. Therefore, system call functions such as sys_xyzzy() or compat_sys_xyzzy() should only be called from userspace via the syscall table, but not from elsewhere in the kernel. At least on 64-bit x86, it will likely be a hard requirement from v4.17 onwards to not call system call functions in the kernel: It is better to use use a different calling convention for system calls there, where struct pt_regs is decoded on-the-fly in a syscall wrapper which then hands processing over to the actual syscall function. This means that only those parameters which are actually needed for a specific syscall are passed on during syscall entry, instead of filling in six CPU registers with random user space content all the time (which may cause serious trouble down the call chain). Those x86-specific patches will be pushed through the x86 tree in the near future. Moreover, rules on how data may be accessed may differ between kernel data and user data. This is another reason why calling sys_xyzzy() is generally a bad idea, and -- at most -- acceptable in arch-specific code. This patchset removes all in-kernel calls to syscall functions in the kernel with the exception of arch/. On top of this, it cleans up the three places where many syscalls are referenced or prototyped, namely kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h" * 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits) bpf: whitelist all syscalls for error injection kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions kernel/sys_ni: sort cond_syscall() entries syscalls/x86: auto-create compat_sys_*() prototypes syscalls: sort syscall prototypes in include/linux/compat.h net: remove compat_sys_*() prototypes from net/compat.h syscalls: sort syscall prototypes in include/linux/syscalls.h kexec: move sys_kexec_load() prototype to syscalls.h x86/sigreturn: use SYSCALL_DEFINE0 x86: fix sys_sigreturn() return type to be long, not unsigned long x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm() mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead() mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff() mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64() fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate() fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate() fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid() kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare() ... |
||
![]() |
f5a8eb632b |
arch: remove obsolete architecture ports
This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s 3iIVHovno/JuJnTOE8LY =fQ8z -----END PGP SIGNATURE----- Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ... |
||
![]() |
c9297d2841 |
This tag contains the core nds32 Linux port(including interrupt controller
driver and timer driver), which has been through 7 rounds of review on mailing list. It is able to boot to shell and passes most LTP-2017 testsuites in nds32 AE3XX platform. Total Tests: 1901 Total Skipped Tests: 618 Total Failures: 78 Copied below is the ChangeLog that contains the history of this patch set: Changes in v7: - Update cpu binding document to add "andestech,nds32v3" as fallback - Remove unnecessary configs of arch/nds32/Kconfig - Use GENERIC_CALIBRATE_DELAY - Add more help texts for minimum CPU type config - Update defconfig because of Kconfig changed and bug fixed - Move early_trap_init() declaration to nds32.h - Refine dma.c - Remove apply_relocate() in module.c and include <linux/moduleloader.h> to catch it - Add do_kernel_restart() in machine_restart() - Clean up setup.c to remove CONFIG_VGA_CONSOLE and some extern declaration functions - Add negative dependency for VGA_CONSOLE on nds32 - Refine ptrace.c and arch/nds32/include/asm/ptrace.h - Refine syscall restart flow and arch/nds32/kernel/signal.c - Fix a bug in VDSO - Remove the handling for kernel code unaligned accessing - Add a description for unaligned access handling in git commit message. - Rebase to v4.16-rc1 - Replace ACCESS_ONCE with READ_ONCE - Replace atomic_long_dec(&mm->nr_ptes) with mm_dec_nr_ptes(mm) - Remove print_symbol(%s) with printk(%pS) - Add bpf_perf_event.h - Remove init_stack and init_thread_info Changes in v6: - Refine naming for atl2c - Refine ae3xx.dts - Remove CONFIG_TIMER_ATCPIT100 in defconfig - Refine elf.h - Fix a vdso bug - Separate arch patchset and timer patchset - To select TIMER_OF in drivers/clocksource/Kconfig instead of arch/nds32/Kconfig Changes in v5: - Remove __NR__llseek and sys_mmap() - Add a comment to explain that we don't have clocksource cycle counter in the CPU - Add volatile in iounmap() - Fix typo Featuretures to Features - Replace CPU_CACHE_NONALIASING with !CPU_CACHE_ALIASING - Fix a endian bug when we try to get val = of_get_property(cpu,"clock-frequency", NULL) - Add screen_info to fix the building error when CONFIG_ VGA_CONSOLE is enabled - Remove unnecessary msync() - Add depends on !64BIT || BROKEN for faraday Kconfig because the descriptor only supports 32bit - Add atl2c binding document - Remove unnecessary include headers - Fix a vector table bug. It placed wrong vector handlers for 2 exceptions. - Fix a vdso bug. It may encounter TLB multi-hit exception because we accidently set it as a global page. - Add proper isb and barrier after some cache operations - Fix a bug in system call restart flow. $r0 ~ $r5 does not be recovered before restarting system call - Fix the build errors for OpenRISC and SPARC because io.h changed. - Update ae3xx.dts to support atl2c. Changes in v4: - Add atcpit100 timer driver due to it include vdso implementations and sent them together with nds32 may help reviewer to review. - Update ae3xx.dts for atcpit100 clock setting and remove vdso settings. - To get cycle counter register by timer driver instead of dts. - Use "depends on NDS32 || COMPILE_TEST" in atcpit100 driver because it is needed for nds32 vdso - Update defconfig becasue kconfig rename from CONFIG_CLKSRC_ATCPIT100 to CONFIG_TIMER_ATCPIT100 - Remove ag101p.dts because we are not yet ready for ag101p platform. - Update copyright style to SPDX-License-Identifier - Include <linux/uaccess.h> instead of <asm/uaccess.h> - Add local_irq_save()/local_irq_restore() to protect SR_TLB_VPN in update_mmu_cache(). - Update cpu_dcache_inval_all implementation to make sure all level cache are writeback. Changes in v3: - Use arch's io.h instead of generic one - Add andestech-boards binding document - Update nds32/cpus.txt binding document - Remove atcpit100 timer drivers - Select NO_BOOTMEM and delete HAVE_MEMBLOCK_NODE_MAP - make CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN are dependent - Add cpu type to select HWZOL/CPU_CACHE_ALIASING - Change CPU_CACHE_NONALIASING to CPU_CACHE_ALIASING - Remove bootarg from device tree script - Update ag101p.dts and ae3xx.dts for correct board name. - Clear and simplify defconfig - Implement L2C_R_REG/ L2C_W_REG with readl/writel instead of __raw_readl/__raw_writel for endian save - Remove early_init_dt_add_memory_arch/early_init_dt_alloc_memory_arch to use the generic ones - Refine devicetree.c - Fix bug https://lkml.kernel.org/r/1499782590-31366-1-git-send-ema... - Refine irqchip/irq-ativic32.c implementations - Add COMPILE_TEST in drivers/net/ethernet/faraday/Kconfig - Refine cache operations - Add CONFIG_HW_SUPPORT_UNALIGNMENT_ACCESS - Fix ZERO_PAGE define - Remove SA_RESTORER - Remove uapi/asm/signal.h - Redefine user_pt_regs - Remove spinlock.h - Remove __ARCH_WANT_RENAMEAT and __ARCH_WANT_SYSCALL_OFF_T from unistd.h - Remove set_fs(USER_DS) because flush_old_exec() will do this setting - Replace in_atomic() with faulthandler_disabled() - Add barrier.h - Select COMMON_CLK - Add clk_pll in dts - Add of_clk_init() in arch/nds32/kernel/time.c Changes in v2: - Set GENERIC_CALIBRATE_DELAY default n - Add earlycon support - Remove earlyprintk - Add CPU_BIG_ENDIAN, CPU_LITTLE_ENDIAN support - Refine unalignment access exception handler - Add VMSPLIT support - Use only one defconfig - Change interrupt-cells from 2 to 1 - Refine andestech cpu names in bindings/nds32/cpus.txt - Get clock frequency in dts because fpga bitmap doesn't include this feature - Update MAINTAINERS for bindings - Remove unused configs in Kconfig - Refine device tree scripts - Refine coding style - Use generic ioremap_nocache - Remove L2CC_PA_BASE define and its codes in head.S. It will be moved to bootloader. - Set PHYS_OFFSET to 0x0 instead of CONFIG_MEMORY_START - Remove unused macros - Simplify cpu_cache_* API - Change __asm__ __volatile__ to asm volatile - Refine uaccess.h - Remove unused/deprecated syscall - Use generic posix_types.h - Remove arch_trace_hardirqs_on/arch_trace_hardirqs_off - Fix bug of restart syscall - Refine syscall implementations - Use IS_ENABLED to replace ifdef as possible - Remove device_initcall(nds32_device_probe) - Refine vdso implementations - Refine copy_from_user()/copy_to_user()/clear_user()/get_user()/memmove()/memcpy() - Refine ioremap.c - Refine irq-ativic32.c - Fix a bug of earlycon.c - Export ioremap_nocache/ioremap_uc/ioremap_wc/ioremap_wt - Add atcpit100 driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (GNU/Linux) iQIcBAABAgAGBQJawZ28AAoJEHfB0l0b2JxExKYQAJ7btaPeIplIndrphlTQkfzW d1AhVBhwAlvqsOcFf+kwVIqOnfcLCtzVvgc63qc6mAroDZKcd+uuqOtkC801b33i jxcfSX802PciT3VhE8xz9OWFY9D3in/UCBhGe2OvY/cD/eC34gZhUqJhML/ioR5q DNPvua6lgYIN9VrFds19MjRzl7RwDBqNccQoFTXWc9Hl1Vs0YdKdbkOz0IWNtoLQ crP0v/UuHMC++WdU+MvDIEFqNVuXikg/NA+odPIbp3eF3xcmQBM0blWAi37eOKFo rzTw7TKtL8xObjvhyzx3aYFKPpLBfuYwk8onoZlthlqcwFClZy4lzdDdDxJhKiJ6 5hilzCSqEWXB9osQsrWgAuK1rNRvroChIp6/rcdGAq33mTPLVydx7hSKELhE7wuN UUaiJSSNRG1ZrR8tkccQpaRBjJ/gfXWGC3ys723oWz8A4bDzMkvZVzdOGOEZ+CsI w4HKNHLeY50wztV6dDSiVPhvUXQjBH9qd2zVHlutbfulPI/XNkGRfWpEGVT1zD4y pO3aHVJfsv+8aeyVBcXyN74O34a9HYa7811v7V5RI+uftdPhkzOwxuMQVMMJPe3s 4u4NglP7fekeWyDGCXFKOGoVOuCAUPHuzBUCFjL/cStHjrkBGVQvL1I925sJNabu IatFh62x8Ez4m2hIf5fg =J/YF -----END PGP SIGNATURE----- Merge tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 architecture support from Greentime Hu: "This contains the core nds32 Linux port (including interrupt controller driver and timer driver), which has been through seven rounds of review on mailing list. It is able to boot to shell and passes most LTP-2017 testsuites in nds32 AE3XX platform: Total Tests: 1901 Total Skipped Tests: 618 Total Failures: 78" Reviewed-by: Arnd Bergmann <arnd@arndb.de> * tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: (44 commits) nds32: To use the generic dump_stack() nds32: fix building failed if using elf toolchain. nios2: add ioremap_nocache declaration before include asm-generic/io.h. nds32: fix building failed if using older version gcc. dt-bindings: timer: Add andestech atcpit100 timer binding doc clocksource/drivers/atcpit100: VDSO support clocksource/drivers/atcpit100: Add andestech atcpit100 timer net: faraday add nds32 support. irqchip: Andestech Internal Vector Interrupt Controller driver dt-bindings: interrupt-controller: Andestech Internal Vector Interrupt Controller dt-bindings: nds32 SoC Bindings dt-bindings: nds32 L2 cache controller Bindings dt-bindings: nds32 CPU Bindings MAINTAINERS: Add nds32 nds32: Build infrastructure nds32: defconfig nds32: Miscellaneous header files nds32: Device tree support nds32: Generic timers support nds32: Loadable modules ... |
||
![]() |
cea061e455 |
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - Add "Jailhouse" hypervisor support (Jan Kiszka) - Update DeviceTree support (Ivan Gorinov) - Improve DMI date handling (Andy Shevchenko)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/PCI: Fix a potential regression when using dmi_get_bios_year() firmware/dmi_scan: Uninline dmi_get_bios_year() helper x86/devicetree: Use CPU description from Device Tree of/Documentation: Specify local APIC ID in "reg" MAINTAINERS: Add entry for Jailhouse x86/jailhouse: Allow to use PCI_MMCONFIG without ACPI x86: Consolidate PCI_MMCONFIG configs x86: Align x86_64 PCI_MMCONFIG with 32-bit variant x86/jailhouse: Enable PCI mmconfig access in inmates PCI: Scan all functions when running over Jailhouse jailhouse: Provide detection for non-x86 systems x86/devicetree: Fix device IRQ settings in DT x86/devicetree: Initialize device tree before using it pci: Simplify code by using the new dmi_get_bios_year() helper ACPI/sleep: Simplify code by using the new dmi_get_bios_year() helper x86/pci: Simplify code by using the new dmi_get_bios_year() helper dmi: Introduce the dmi_get_bios_year() helper function x86/platform/quark: Re-use DEFINE_SHOW_ATTRIBUTE() macro x86/platform/atom: Re-use DEFINE_SHOW_ATTRIBUTE() macro |
||
![]() |
d22fff8141 |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar: - Extend the memmap= boot parameter syntax to allow the redeclaration and dropping of existing ranges, and to support all e820 range types (Jan H. Schönherr) - Improve the W+X boot time security checks to remove false positive warnings on Xen (Jan Beulich) - Support booting as Xen PVH guest (Juergen Gross) - Improved 5-level paging (LA57) support, in particular it's possible now to have a single kernel image for both 4-level and 5-level hardware (Kirill A. Shutemov) - AMD hardware RAM encryption support (SME/SEV) fixes (Tom Lendacky) - Preparatory commits for hardware-encrypted RAM support on Intel CPUs. (Kirill A. Shutemov) - Improved Intel-MID support (Andy Shevchenko) - Show EFI page tables in page_tables debug files (Andy Lutomirski) - ... plus misc fixes and smaller cleanups * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits) x86/cpu/tme: Fix spelling: "configuation" -> "configuration" x86/boot: Fix SEV boot failure from change to __PHYSICAL_MASK_SHIFT x86/mm: Update comment in detect_tme() regarding x86_phys_bits x86/mm/32: Remove unused node_memmap_size_bytes() & CONFIG_NEED_NODE_MEMMAP_SIZE logic x86/mm: Remove pointless checks in vmalloc_fault x86/platform/intel-mid: Add special handling for ACPI HW reduced platforms ACPI, x86/boot: Introduce the ->reduced_hw_early_init() ACPI callback ACPI, x86/boot: Split out acpi_generic_reduce_hw_init() and export x86/pconfig: Provide defines and helper to run MKTME_KEY_PROG leaf x86/pconfig: Detect PCONFIG targets x86/tme: Detect if TME and MKTME is activated by BIOS x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G x86/boot/compressed/64: Use page table in trampoline memory x86/boot/compressed/64: Use stack from trampoline memory x86/boot/compressed/64: Make sure we have a 32-bit code segment x86/mm: Do not use paravirtualized calls in native_set_p4d() kdump, vmcoreinfo: Export pgtable_l5_enabled value x86/boot/compressed/64: Prepare new top-level page table for trampoline x86/boot/compressed/64: Set up trampoline memory x86/boot/compressed/64: Save and restore trampoline memory ... |
||
![]() |
46e0d28bdb |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar: "The main scheduler changes in this cycle were: - NUMA balancing improvements (Mel Gorman) - Further load tracking improvements (Patrick Bellasi) - Various NOHZ balancing cleanups and optimizations (Peter Zijlstra) - Improve blocked load handling, in particular we can now reduce and eventually stop periodic load updates on 'very idle' CPUs. (Vincent Guittot) - On isolated CPUs offload the final 1Hz scheduler tick as well, plus related cleanups and reorganization. (Frederic Weisbecker) - Core scheduler code cleanups (Ingo Molnar)" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) sched/core: Update preempt_notifier_key to modern API sched/cpufreq: Rate limits for SCHED_DEADLINE sched/fair: Update util_est only on util_avg updates sched/cpufreq/schedutil: Use util_est for OPP selection sched/fair: Use util_est in LB and WU paths sched/fair: Add util_est on top of PELT sched/core: Remove TASK_ALL sched/completions: Use bool in try_wait_for_completion() sched/fair: Update blocked load when newly idle sched/fair: Move idle_balance() sched/nohz: Merge CONFIG_NO_HZ_COMMON blocks sched/fair: Move rebalance_domains() sched/nohz: Optimize nohz_idle_balance() sched/fair: Reduce the periodic update duration sched/nohz: Stop NOHZ stats when decayed sched/cpufreq: Provide migration hint sched/nohz: Clean up nohz enter/exit sched/fair: Update blocked load from NEWIDLE sched/fair: Add NOHZ stats balancing sched/fair: Restructure nohz_balance_kick() ... |
||
![]() |
67a7acd377 |
kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions
This keeps it in line with the SYSCALL_DEFINEx() / COMPAT_SYSCALL_DEFINEx() calling convention. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> |
||
![]() |
486adcea4a |
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar: "The main kernel side changes were: - Modernize the kprobe and uprobe creation/destruction tooling ABIs: The existing text based APIs (kprobe_events and uprobe_events in tracefs), are naive, limited ABIs in that they require user-space to clean up after themselves, which is both difficult and fragile if the tool is buggy or exits unexpectedly. In other words they are not really suited for modern, robust tooling. So introduce a modern, file descriptor based ABI that does not have these limitations: introduce the 'perf_kprobe' and 'perf_uprobe' PMUs and extend the perf_event_open() syscall to create events with a kprobe/uprobe attached to them. These [k,u]probe are associated with this file descriptor, so they are not available in tracefs. (Song Liu) - Intel Cannon Lake CPU support (Harry Pan) - Intel PT cleanups (Alexander Shishkin) - Improve the performance of pinned/flexible event groups by using RB trees (Alexey Budankov) - Add PERF_EVENT_IOC_MODIFY_ATTRIBUTES which allows the modification of hardware breakpoints, which new ABI variant massively speeds up existing tooling that uses hardware breakpoints to instrument (and debug) memory usage. (Milind Chabbi, Jiri Olsa) - Various Intel PEBS handling fixes and improvements, and other Intel PMU improvements (Kan Liang) - Various perf core improvements and optimizations (Peter Zijlstra) - ... misc cleanups, fixes and updates. There's over 200 tooling commits, here's an (imperfect) list of highlights: - 'perf annotate' improvements: * Recognize and handle jumps to other functions as calls, which improves the navigation along jumps and back. (Arnaldo Carvalho de Melo) * Add the 'P' hotkey in TUI annotation to dump annotation output into a file, to ease e-mail reporting of annotation details. (Arnaldo Carvalho de Melo) * Add an IPC/cycles column to the TUI (Jin Yao) * Improve s390 assembly annotation (Thomas Richter) * Refactor the output formatting logic to better separate it into interactive and non-interactive features and add the --stdio2 output variant to demonstrate this. (Arnaldo Carvalho de Melo) - 'perf script' improvements: * Add Python 3 support (Jaroslav Škarvada) * Add --show-round-event (Jiri Olsa) - 'perf c2c' improvements: * Add NUMA analysis support (Jiri Olsa) - 'perf trace' improvements: * Improve PowerPC support (Ravi Bangoria) - 'perf inject' improvements: * Integrate ARM CoreSight traces (Robert Walker) - 'perf stat' improvements: * Add the --interval-count option (yuzhoujian) * Add the --timeout option (yuzhoujian) - 'perf sched' improvements (Changbin Du) - Vendor events improvements : * Add IBM s390 vendor events (Thomas Richter) * Add and improve arm64 vendor events (John Garry, Ganapatrao Kulkarni) * Update POWER9 vendor events (Sukadev Bhattiprolu) - Intel PT tooling improvements (Adrian Hunter) - PMU handling improvements (Agustin Vega-Frias) - Record machine topology in perf.data (Jiri Olsa) - Various overwrite related cleanups (Kan Liang) - Add arm64 dwarf post unwind support (Kim Phillips, Jean Pihet) - ... and lots of other changes, cleanups and fixes, see the shortlog and Git history for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (262 commits) perf/x86/intel: Enable C-state residency events for Cannon Lake perf/x86/intel: Add Cannon Lake support for RAPL profiling perf/x86/pt, coresight: Clean up address filter structure perf vendor events s390: Add JSON files for IBM z14 perf vendor events s390: Add JSON files for IBM z13 perf vendor events s390: Add JSON files for IBM zEC12 zBC12 perf vendor events s390: Add JSON files for IBM z196 perf vendor events s390: Add JSON files for IBM z10EC z10BC perf mmap: Be consistent when checking for an unmaped ring buffer perf mmap: Fix accessing unmapped mmap in perf_mmap__read_done() perf build: Fix check-headers.sh opts assignment perf/x86: Update rdpmc_always_available static key to the modern API perf annotate: Use absolute addresses to calculate jump target offsets perf annotate: Defer searching for comma in raw line till it is needed perf annotate: Support jumping from one function to another perf annotate: Add "_local" to jump/offset validation routines perf python: Reference Py_None before returning it perf annotate: Mark jumps to outher functions with the call arrow perf annotate: Pass function descriptor to its instruction parsing routines perf annotate: No need to calculate notes->start twice ... |
||
![]() |
701f3b3149 |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar: "The main changes in the locking subsystem in this cycle were: - Add the Linux Kernel Memory Consistency Model (LKMM) subsystem, which is an an array of tools in tools/memory-model/ that formally describe the Linux memory coherency model (a.k.a. Documentation/memory-barriers.txt), and also produce 'litmus tests' in form of kernel code which can be directly executed and tested. Here's a high level background article about an earlier version of this work on LWN.net: https://lwn.net/Articles/718628/ The design principles: "There is reason to believe that Documentation/memory-barriers.txt could use some help, and a major purpose of this patch is to provide that help in the form of a design-time tool that can produce all valid executions of a small fragment of concurrent Linux-kernel code, which is called a "litmus test". This tool's functionality is roughly similar to a full state-space search. Please note that this is a design-time tool, not useful for regression testing. However, we hope that the underlying Linux-kernel memory model will be incorporated into other tools capable of analyzing large bodies of code for regression-testing purposes." [...] "A second tool is klitmus7, which converts litmus tests to loadable kernel modules for direct testing. As with herd7, the klitmus7 code is freely available from http://diy.inria.fr/sources/index.html (and via "git" at https://github.com/herd/herdtools7)" [...] Credits go to: "This patch was the result of a most excellent collaboration founded by Jade Alglave and also including Alan Stern, Andrea Parri, and Luc Maranget." ... and to the gents listed in the MAINTAINERS entry: LINUX KERNEL MEMORY CONSISTENCY MODEL (LKMM) M: Alan Stern <stern@rowland.harvard.edu> M: Andrea Parri <parri.andrea@gmail.com> M: Will Deacon <will.deacon@arm.com> M: Peter Zijlstra <peterz@infradead.org> M: Boqun Feng <boqun.feng@gmail.com> M: Nicholas Piggin <npiggin@gmail.com> M: David Howells <dhowells@redhat.com> M: Jade Alglave <j.alglave@ucl.ac.uk> M: Luc Maranget <luc.maranget@inria.fr> M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> The LKMM project already found several bugs in Linux locking primitives and improved the understanding and the documentation of the Linux memory model all around. - Add KASAN instrumentation to atomic APIs (Dmitry Vyukov) - Add RWSEM API debugging and reorganize the lock debugging Kconfig (Waiman Long) - ... misc cleanups and other smaller changes" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) locking/Kconfig: Restructure the lock debugging menu locking/Kconfig: Add LOCK_DEBUGGING_SUPPORT to make it more readable locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches lockdep: Make the lock debug output more useful locking/rtmutex: Handle non enqueued waiters gracefully in remove_waiter() locking/atomic, asm-generic, x86: Add comments for atomic instrumentation locking/atomic, asm-generic: Add KASAN instrumentation to atomic operations locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h locking/atomic, asm-generic: Add asm-generic/atomic-instrumented.h locking/xchg/alpha: Remove superfluous memory barriers from the _local() variants tools/memory-model: Finish the removal of rb-dep, smp_read_barrier_depends(), and lockless_dereference() tools/memory-model: Add documentation of new litmus test tools/memory-model: Remove mention of docker/gentoo image locking/memory-barriers: De-emphasize smp_read_barrier_depends() some more locking/lockdep: Show unadorned pointers mutex: Drop linkage.h from mutex.h tools/memory-model: Remove rb-dep, smp_read_barrier_depends, and lockless_dereference tools/memory-model: Convert underscores to hyphens tools/memory-model: Add a S lock-based external-view litmus test tools/memory-model: Add required herd7 version to README file ... |
||
![]() |
8747a29173 |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar: "The main RCU subsystem changes in this cycle were: - Miscellaneous fixes, perhaps most notably removing obsolete code whose only purpose in life was to gather information for the now-removed RCU debugfs facility. Other notable changes include removing NO_HZ_FULL_ALL in favor of the nohz_full kernel boot parameter, minor optimizations for expedited grace periods, some added tracing, creating an RCU-specific workqueue using Tejun's new WQ_MEM_RECLAIM flag, and several cleanups to code and comments. - SRCU cleanups and optimizations. - Torture-test updates, perhaps most notably the adding of ARMv8 support, but also including numerous cleanups and usability fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) rcu: Create RCU-specific workqueues with rescuers torture: Provide more sensible nreader/nwriter defaults for rcuperf torture: Grace periods do not piggyback off of themselves torture: Adjust rcuperf trace processing to allow for workqueues torture: Default jitter off when running rcuperf torture: Specify qemu memory size with --memory argument rcutorture: Add basic ARM64 support to run scripts rcutorture: Update kvm.sh header comment rcutorture: Record which grace-period primitives are tested rcutorture: Re-enable testing of dynamic expediting rcutorture: Avoid fake-writer use of undefined primitives rcutorture: Abstract function and module names rcutorture: Replace multi-instance kzalloc() with kcalloc() rcu: Remove SRCU throttling srcu: Remove dead code in srcu_gp_end() srcu: Reduce scans of srcu_data in counter wrap check srcu: Prevent sdp->srcu_gp_seq_needed_exp counter wrap srcu: Abstract function name rcu: Make expedited RCU CPU selection avoid unnecessary stores rcu: Trace expedited GP delays due to transitioning CPUs ... |
||
![]() |
54dce3c35b |
Merge branch 'core-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core updates from Ingo Molnar: "Two changes: - add membarriers to Documentation/features/ - fix a minor nit in panic printk formatting" * 'core-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: panic: Add closing panic marker parenthesis Documentation/features, membarriers: Document membarrier-sync-core architecture support Documentation/features: Allow comments in arch features files |
||
![]() |
320b164abb |
main drm pull request for v4.17
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJavDxYAAoJEAx081l5xIa+pCoP/iwjuxkSTdJpZUx5g0daGkCK O18moGqGPChb7qJovfHqCKZ1f9PGulQt7SxwFzzJXNbv0PbfMA/Og0EhMLBImb+Q VfYgq2vJLpmkikgcI5fBrzs9DRMQKKobGIzw24VS7IkPYA7d8KgAyywBwG0+LUFR G3sobClgapsfaUcleb3ZOeDwymGkGCuuYRpYE4giHtuMDIxCWLePKJKOaOIq8o6P A1557EvSbKuLQGI9X50jzJOoBE3TKRQYkzuM1GthdOF8RHaMNcFy44lDNO030HwZ hzwAIg5Izhu16PqZGyEdIQ6SJTv3isRJWEciPnOsijvjl1li3ehMdQfhGISa/jZO ivEGd32kaactiT0jJ5OyexergEViCPVKCIORksSIk46L84luDva9L22A3yu0mf3F ixB63bAiLH7Py77kH3DmeJdqhMxlVZXCbdBVFDvzZvY4O3Mx0Dv9mmN/nw1FVCFH scSYnXea9/o4IY5yGASU6FAUJEEGu20HAN12oHJw7/taqV/gbbEos3F7AGmjJE0f qe6Rt/8fwi7Lhm2va6EoOo6yltH/gL4/AgnsN76VzppNGbaIv7W8Qa4Y/ES1lAE1 SATAEUJfU8kiLrVOolIElPbgfdJwv8TzoxiKB5wK/eoH20wf4BTmOuBMviaL2qXK Sz6wihq+IlMXW7Y7pIl/ =DrA+ -----END PGP SIGNATURE----- Merge tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux Pull drm updates from Dave Airlie: "Cannonlake and Vega12 support are probably the two major things. This pull lacks nouveau, Ben had some unforseen leave and a few other blockers so we'll see how things look or maybe leave it for this merge window. core: - Device links to handle sound/gpu pm dependency - Color encoding/range properties - Plane clipping into plane check helper - Backlight helpers - DP TP4 + HBR3 helper support amdgpu: - Vega12 support - Enable DC by default on all supported GPUs - Powerplay restructuring and cleanup - DC bandwidth calc updates - DC backlight on pre-DCE11 - TTM backing store dropping support - SR-IOV fixes - Adding "wattman" like functionality - DC crc support - Improved DC dual-link handling amdkfd: - GPUVM support for dGPU - KFD events for dGPU - Enable PCIe atomics for dGPUs - HSA process eviction support - Live-lock fixes for process eviction - VM page table allocation fix for large-bar systems panel: - Raydium RM68200 - AUO G104SN02 V2 - KEO TX31D200VM0BAA - ARM Versatile panels i915: - Cannonlake support enabled - AUX-F port support added - Icelake base enabling until internal milestone of forcewake support - Query uAPI interface (used for GPU topology information currently) - Compressed framebuffer support for sprites - kmem cache shrinking when GPU is idle - Avoid boosting GPU when waited item is being processed already - Avoid retraining LSPCON link unnecessarily - Decrease request signaling latency - Deprecation of I915_SET_COLORKEY_NONE - Kerneldoc and compiler warning cleanup for upcoming CI enforcements - Full range ycbcr toggling - HDCP support i915/gvt: - Big refactor for shadow ppgtt - KBL context save/restore via LRI cmd (Weinan) - Properly unmap dma for guest page (Changbin) vmwgfx: - Lots of various improvements etnaviv: - Use the drm gpu scheduler - prep work for GC7000L support vc4: - fix alpha blending - Expose perf counters to userspace pl111: - Bandwidth checking/limiting - Versatile panel support sun4i: - A83T HDMI support - A80 support - YUV plane support - H3/H5 HDMI support omapdrm: - HPD support for DVI connector - remove lots of static variables msm: - DSI updates from 10nm / SDM845 - fix for race condition with a3xx/a4xx fence completion irq - some refactoring/prep work for eventual a6xx support (ie. when we have a userspace) - a5xx debugfs enhancements - some mdp5 fixes/cleanups to prepare for eventually merging writeback - support (ie. when we have a userspace) tegra: - mmap() fixes for fbdev devices - Overlay plane for hw cursor fix - dma-buf cache maintenance support mali-dp: - YUV->RGB conversion support rockchip: - rk3399/chromebook fixes and improvements rcar-du: - LVDS support move to drm bridge - DT bindings for R8A77995 - Driver/DT support for R8A77970 tilcdc: - DRM panel support" * tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux: (1646 commits) drm/i915: Fix hibernation with ACPI S0 target state drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt drm/i915: Specify which engines to reset following semaphore/event lockups drm/i915/dp: Write to SET_POWER dpcd to enable MST hub. drm/amdkfd: Use ordered workqueue to restore processes drm/amdgpu: Fix acquiring VM on large-BAR systems drm/amd/pp: clean header file hwmgr.h drm/amd/pp: use mlck_table.count for array loop index limit drm: Fix uabi regression by allowing garbage mode->type from userspace drm/amdgpu: Add an ATPX quirk for hybrid laptop drm/amdgpu: fix spelling mistake: "asssert" -> "assert" drm/amd/pp: Add new asic support in pp_psm.c drm/amd/pp: Clean up powerplay code on Vega12 drm/amd/pp: Add smu irq handlers for legacy asics drm/amd/pp: Fix set wrong temperature range on smu7 drm/amdgpu: Don't change preferred domian when fallback GTT v5 drm/vmwgfx: Bump version patchlevel and date drm/vmwgfx: use monotonic event timestamps drm/vmwgfx: Unpin the screen object backup buffer when not used drm/vmwgfx: Stricter count of legacy surface device resources ... |
||
![]() |
0930437e8f
|
Merge remote-tracking branches 'spi/topic/sh-msiof', 'spi/topic/sprd' and 'spi/topic/tegra20-slink' into spi-next | ||
![]() |
70a3550b8c
|
Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm-qspi', 'spi/topic/bcm2835aux', 'spi/topic/dw' and 'spi/topic/gpio' into spi-next | ||
![]() |
9122eed528 |
ceph: quota: report root dir quota usage in statfs
This commit changes statfs default behaviour when reporting usage statistics. Instead of using the overall filesystem usage, statfs now reports the quota for the filesystem root, if ceph.quota.max_bytes has been set for this inode. If quota hasn't been set, it falls back to the old statfs behaviour. A new mount option is also added ('noquotadf') to disable this behaviour. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
![]() |
fb18a57568 |
ceph: quota: add initial infrastructure to support cephfs quotas
This patch adds the infrastructure required to support cephfs quotas as it is currently implemented in the ceph fuse client. Cephfs quotas can be set on any directory, and can restrict the number of bytes or the number of files stored beneath that point in the directory hierarchy. Quotas are set using the extended attributes 'ceph.quota.max_files' and 'ceph.quota.max_bytes', and can be removed by setting these attributes to '0'. Link: http://tracker.ceph.com/issues/22372 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
![]() |
103cf0e579 |
Merge branches 'pm-cpuidle' and 'pm-tools'
* pm-cpuidle: cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() ARM: cpuidle: Drop memory allocation error message from arm_idle_init_cpu() * pm-tools: pm-graph: AnalyzeSuspend v5.0 pm-graph: AnalyzeBoot v2.2 pm-graph: config files and installer |
||
![]() |
a9f36db7ec |
Merge branch 'pm-cpufreq'
* pm-cpufreq: (38 commits) cpufreq: CPPC: Use transition_delay_us depending transition_latency cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice cpufreq: p4-clockmod: Don't validate the frequency table twice cpufreq: mediatek: Don't validate the frequency table twice cpufreq: longhaul: Don't validate the frequency table twice cpufreq: ia64-acpi: Don't validate the frequency table twice cpufreq: elanfreq: Don't validate the frequency table twice cpufreq: e_powersaver: Don't validate the frequency table twice cpufreq: cpufreq-dt: Don't validate the frequency table twice ... |
||
![]() |
e3a495c4ee |
Merge branches 'pm-core', 'pm-sleep' and 'acpi-pm'
* pm-core: driver core: Introduce device links reference counting PM / wakeirq: Add wakeup name to dedicated wake irqs * pm-sleep: PM / hibernate: Change message when writing to /sys/power/resume PM / hibernate: Make passing hibernate offsets more friendly PCMCIA / PM: Avoid noirq suspend aborts during suspend-to-idle * acpi-pm: ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA ACPI / PM: Allow deeper wakeup power states with no _SxD nor _SxW ACPI / PM: Reduce LPI constraints logging noise ACPI / PM: Do not reconfigure GPEs for suspend-to-idle |
||
![]() |
49076b2c64 |
Merge branches 'acpi-osi', 'acpi-scan', 'acpi-tad', 'acpi-video' and 'acpi-misc'
* acpi-osi: ACPI / OSI: Add OEM _OSI strings to disable NVidia RTD3 * acpi-scan: ACPI / scan: Send change uevent with offine environmental data * acpi-tad: ACPI: Add Time and Alarm Device (TAD) driver * acpi-video: ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E * acpi-misc: ACPI / Kconfig: Update ACPI_PROCFS_POWER help text |
||
![]() |
0c9ed61bdd |
Merge branches 'acpi-battery', 'acpi-doc' and 'acpi-pmic'
* acpi-battery: Revert "ACPI: battery: Add the ThinkPad "Not Charging" quirk" ACPI: battery: do not export degraded capacity values over 100 ACPI: battery: make function __battery_hook_unregister() static ACPI: battery: Add the ThinkPad "Not Charging" quirk thinkpad_acpi: Add support for battery thresholds power: add to_power_supply macro to the API battery: Add the battery hooking API * acpi-doc: ACPI: sysfs: Update device object sysfs documentation * acpi-pmic: ACPI / PMIC: Replace license boilerplate with SPDX license identifier |
||
![]() |
f30e4148b1 |
Update README file for cifs.ko
Remove references to two obsolete /proc/fs/cifs parameters and update for a few minor SMB3 features. Signed-off-by: Steve French <smfrench@gmail.com> |
||
![]() |
68dbe2f841 |
Update TODO list for cifs.ko
Update list of items still TODO in cifs.ko Signed-off-by: Steve French <smfrench@gmail.com> |
||
![]() |
c0b458a946 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
3e67f106f6 |
inet: frags: break the 2GB limit for frags storage
Some users are willing to provision huge amounts of memory to be able to perform reassembly reasonnably well under pressure. Current memory tracking is using one atomic_t and integers. Switch to atomic_long_t so that 64bit arches can use more than 2GB, without any cost for 32bit arches. Note that this patch avoids an overflow error, if high_thresh was set to ~2GB, since this test in inet_frag_alloc() was never true : if (... || frag_mem_limit(nf) > nf->high_thresh) Tested: $ echo 16000000000 >/proc/sys/net/ipv4/ipfrag_high_thresh <frag DDOS> $ grep FRAG /proc/net/sockstat FRAG: inuse 14705885 memory 16000002880 $ nstat -n ; sleep 1 ; nstat | grep Reas IpReasmReqds 3317150 0.0 IpReasmFails 3317112 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
648700f76b |
inet: frags: use rhashtables for reassembly units
Some applications still rely on IP fragmentation, and to be fair linux reassembly unit is not working under any serious load. It uses static hash tables of 1024 buckets, and up to 128 items per bucket (!!!) A work queue is supposed to garbage collect items when host is under memory pressure, and doing a hash rebuild, changing seed used in hash computations. This work queue blocks softirqs for up to 25 ms when doing a hash rebuild, occurring every 5 seconds if host is under fire. Then there is the problem of sharing this hash table for all netns. It is time to switch to rhashtables, and allocate one of them per netns to speedup netns dismantle, since this is a critical metric these days. Lookup is now using RCU. A followup patch will even remove the refcount hold/release left from prior implementation and save a couple of atomic operations. Before this patch, 16 cpus (16 RX queue NIC) could not handle more than 1 Mpps frags DDOS. After the patch, I reach 9 Mpps without any tuning, and can use up to 2GB of storage for the fragments (exact number depends on frags being evicted after timeout) $ grep FRAG /proc/net/sockstat FRAG: inuse 1966916 memory 2140004608 A followup patch will change the limits for 64bit arches. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Florian Westphal <fw@strlen.de> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
a5af1fb94f |
dt-bindings: net: meson-dwmac: add support for the Meson8m2 SoC
The Meson8m2 SoC uses a similar (potentially even identical) register layout for the dwmac glue as Meson8b and GXBB. Unfortunately there is no documentation available. Testing shows that both, RMII and RGMII PHYs are working if they are configured as on Meson8b. Add a new compatible string to the documentation so differences (if there are any) between Meson8m2 and the other SoCs can be taken care of within the driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
169310f71f |
Merge branch 'linus' into locking/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
![]() |
a44406ec3d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Fix RCU locking in xfrm_local_error(), from Taehee Yoo. 2) Fix return value assignments and thus error checking in iwl_mvm_start_ap_ibss(), from Johannes Berg. 3) Don't count header length twice in vti4, from Stefano Brivio. 4) Fix deadlock in rt6_age_examine_exception, from Eric Dumazet. 5) Fix out-of-bounds access in nf_sk_lookup_slow{v4,v6}() from Subash Abhinov. 6) Check nladdr size in netlink_connect(), from Alexander Potapenko. 7) VF representor SQ numbers are 32 not 16 bits, in mlx5 driver, from Or Gerlitz. 8) Out of bounds read in skb_network_protocol(), from Eric Dumazet. 9) r8169 driver sets driver data pointer after register_netdev() which is too late. Fix from Heiner Kallweit. 10) Fix memory leak in mlx4 driver, from Moshe Shemesh. 11) The multi-VLAN decap fix added a regression when dealing with device that lack a MAC header, such as tun. Fix from Toshiaki Makita. 12) Fix integer overflow in dynamic interrupt coalescing code. From Tal Gilboa. 13) Use after free in vrf code, from David Ahern. 14) IPV6 route leak between VRFs fix, also from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: mvneta: fix enable of all initialized RXQs net/ipv6: Fix route leaking between VRFs vrf: Fix use after free and double free in vrf_finish_output ipv6: sr: fix seg6 encap performances with TSO enabled net/dim: Fix int overflow vlan: Fix vlan insertion for packets without ethernet header net: Fix untag for vlan packets without ethernet header atm: iphase: fix spelling mistake: "Receiverd" -> "Received" vhost: validate log when IOTLB is enabled qede: Do not drop rx-checksum invalidated packets. hv_netvsc: enable multicast if necessary ip_tunnel: Resolve ipsec merge conflict properly. lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write) qede: Fix barrier usage after tx doorbell write. vhost: correctly remove wait queue during poll failure net/mlx4_core: Fix memory leak while delete slave's resources net/mlx4_en: Fix mixed PFC and Global pause user control requests net/smc: use announced length in sock_recvmsg() llc: properly handle dev_queue_xmit() return value strparser: Fix sign of err codes ... |
||
![]() |
4c0fd7648d |
PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter
The "pcie_ports=auto" parameter set pcie_ports_disabled and pcie_ports_auto to their compiled-in defaults, so specifying the parameter is the same as not using it at all. Remove the "pcie_ports=auto" parameter and update the documentation. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
![]() |
1e447c57ae |
PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter
|
||
![]() |
0550f5a5f0 |
crypto: doc - clarify hash callbacks state machine
Add a note that it is perfectly legal to "abandon" a request object: - call .init() and then (as many times) .update() - _not_ call any of .final(), .finup() or .export() at any point in future Link: https://lkml.kernel.org/r/20180222114741.GA27631@gondor.apana.org.au Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
![]() |
9b85756341 |
dt-bindings: net: renesas-ravb: Add support for r8a77470 SoC
Add a new compatible string for the RZ/G1C (R8A77470) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
2f0aaf7fb1 |
Documentation: ip-sysctl.txt: clarify disable_ipv6
Clarify that when disable_ipv6 is enabled even the ipv6 routes are deleted for the selected interface and from now it will not be possible to add addresses/routes to that interface Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
d162190bde |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree. This batch comes with more input sanitization for xtables to
address bug reports from fuzzers, preparation works to the flowtable
infrastructure and assorted updates. In no particular order, they are:
1) Make sure userspace provides a valid standard target verdict, from
Florian Westphal.
2) Sanitize error target size, also from Florian.
3) Validate that last rule in basechain matches underflow/policy since
userspace assumes this when decoding the ruleset blob that comes
from the kernel, from Florian.
4) Consolidate hook entry checks through xt_check_table_hooks(),
patch from Florian.
5) Cap ruleset allocations at 512 mbytes, 134217728 rules and reject
very large compat offset arrays, so we have a reasonable upper limit
and fuzzers don't exercise the oom-killer. Patches from Florian.
6) Several WARN_ON checks on xtables mutex helper, from Florian.
7) xt_rateest now has a hashtable per net, from Cong Wang.
8) Consolidate counter allocation in xt_counters_alloc(), from Florian.
9) Earlier xt_table_unlock() call in {ip,ip6,arp,eb}tables, patch
from Xin Long.
10) Set FLOW_OFFLOAD_DIR_* to IP_CT_DIR_* definitions, patch from
Felix Fietkau.
11) Consolidate code through flow_offload_fill_dir(), also from Felix.
12) Inline ip6_dst_mtu_forward() just like ip_dst_mtu_maybe_forward()
to remove a dependency with flowtable and ipv6.ko, from Felix.
13) Cache mtu size in flow_offload_tuple object, this is safe for
forwarding as
|
||
![]() |
9217e566bd |
of_net: Implement of_get_nvmem_mac_address helper
It's common practice to store MAC addresses for network interfaces into nvmem devices. However the code to actually do this in the kernel lacks, so this patch adds of_get_nvmem_mac_address() for drivers to obtain the address from an nvmem cell provider. This is particulary useful on devices where the ethernet interface cannot be configured by the bootloader, for example because it's in an FPGA. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
355064675f |
PM / hibernate: Make passing hibernate offsets more friendly
Currently the only way to specify a hibernate offset for a swap file is on the kernel command line. Add a new /sys/power/resume_offset that lets userspace specify the offset and disk to use when initiating a hibernate cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
19b351f16f |
netfilter: add flowtable documentation
This patch adds initial documentation for the Netfilter flowtable infrastructure. Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
![]() |
e8de85d5a1 |
dt-bindings: fsl-quadspi: Add the example of two SPI NOR
Improve the bindings example by adding an example of how to represent two SPI NOR devices. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
||
![]() |
86afad7d87 |
Documentation/process: update FUSE project website
According to the old project site, https://sourceforge.net/projects/fuse/ the project has moved to https://github.com/libfuse/ so we update the link to point to the latest libfuse release. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |