Commit graph

1696 commits

Author SHA1 Message Date
Kevin Hao
b358e2122b mm: page_frag: Introduce page_frag_alloc_align()
In the current implementation of page_frag_alloc(), it doesn't have
any align guarantee for the returned buffer address. But for some
hardwares they do require the DMA buffer to be aligned correctly,
so we would have to use some workarounds like below if the buffers
allocated by the page_frag_alloc() are used by these hardwares for
DMA.
    buf = page_frag_alloc(really_needed_size + align);
    buf = PTR_ALIGN(buf, align);

These codes seems ugly and would waste a lot of memories if the buffers
are used in a network driver for the TX/RX. So introduce
page_frag_alloc_align() to make sure that an aligned buffer address is
returned.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 11:57:28 -08:00
Linus Torvalds
377bf660d0 Revert "mm: fix initialization of struct page for holes in memory layout"
This reverts commit d3921cb8be.

Chris Wilson reports that it causes boot problems:

 "We have half a dozen or so different machines in CI that are silently
  failing to boot, that we believe is bisected to this patch"

and the CI team confirmed that a revert fixed the issues.

The cause is unknown for now, so let's revert it.

Link: https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com/
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-26 10:39:46 -08:00
Andrey Konovalov
acb35b177c kasan, mm: fix resetting page_alloc tags for HW_TAGS
A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.

That commit did reset page tags before the metadata access, but didn't
restore them after.  As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.

Fix this by recovering the tag after the metadata access.

Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com
Fixes: aa1ef4d7b3 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-24 10:34:52 -08:00
Mike Rapoport
d3921cb8be mm: fix initialization of struct page for holes in memory layout
There could be struct pages that are not backed by actual physical
memory.  This can happen when the actual memory bank is not a multiple
of SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.

Such pages are currently initialized using init_unavailable_mem()
function that iterates through PFNs in holes in memblock.memory and if
there is a struct page corresponding to a PFN, the fields if this page
are set to default values and the page is marked as Reserved.

init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.

On a system that has firmware reserved holes in a zone above ZONE_DMA,
for instance in a configuration below:

	# grep -A1 E820 /proc/iomem
	7a17b000-7a216fff : Unknown E820 type
	7a217000-7bffffff : System RAM

unset zone link in struct page will trigger

	VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);

because there are pages in both ZONE_DMA32 and ZONE_DMA (unset zone link
in struct page) in the same pageblock.

Update init_unavailable_mem() to use zone constraints defined by an
architecture to properly setup the zone link and use node ID of the
adjacent range in memblock.memory to set the node link.

Link: https://lkml.kernel.org/r/20210111194017.22696-3-rppt@kernel.org
Fixes: 73a6e474cb ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-24 09:20:52 -08:00
Hailong liu
ce8f86ee94 mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
The trace point *trace_mm_page_alloc_zone_locked()* in __rmqueue() does
not currently cover all branches.  Add the missing tracepoint and check
the page before do that.

[akpm@linux-foundation.org: use IS_ENABLED() to suppress warning]

Link: https://lkml.kernel.org/r/20201228132901.41523-1-carver4lio@163.com
Signed-off-by: Hailong liu <liu.hailong6@zte.com.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-12 18:12:54 -08:00
Baoquan He
dc2da7b45f mm: memmap defer init doesn't work as expected
VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474cb ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.

Before the commit:

  [0.033176] Normal zone: 1445888 pages used for memmap
  [0.033176] Normal zone: 89391104 pages, LIFO batch:63
  [0.035851] ACPI: PM-Timer IO Port: 0x448

With commit

  [0.026874] Normal zone: 1445888 pages used for memmap
  [0.026875] Normal zone: 89391104 pages, LIFO batch:63
  [2.028450] ACPI: PM-Timer IO Port: 0x448

The root cause is the current memmap defer init doesn't work as expected.

Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node.  However, since commit 73a6e474cb,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.

E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2.  The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff].  In fact, we only expect to see that there's
only one memory section's memmap initialized.  That's why more time is
costed at the time.

[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[    0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[    0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[    0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]

Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.

Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474cb ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Andrey Konovalov
aa1ef4d7b3 kasan, mm: reset tags when accessing metadata
Kernel allocator code accesses metadata for slab objects, that may lie
out-of-bounds of the object itself, or be accessed when an object is
freed.  Such accesses trigger tag faults and lead to false-positive
reports with hardware tag-based KASAN.

Software KASAN modes disable instrumentation for allocator code via
KASAN_SANITIZE Makefile macro, and rely on kasan_enable/disable_current()
annotations which are used to ignore KASAN reports.

With hardware tag-based KASAN neither of those options are available, as
it doesn't use compiler instrumetation, no tag faults are ignored, and MTE
is disabled after the first one.

Instead, reset tags when accessing metadata (currently only for SLUB).

Link: https://lkml.kernel.org/r/a0f3cefbc49f34c843b664110842de4db28179d0.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22 12:55:08 -08:00
Vincenzo Frascino
c746170d6a kasan, mm: untag page address in free_reserved_area
free_reserved_area() memsets the pages belonging to a given memory area.
As that memory hasn't been allocated via page_alloc, the KASAN tags that
those pages have are 0x00.  As the result the memset might result in a tag
mismatch.

Untag the address to avoid spurious faults.

Link: https://lkml.kernel.org/r/ebef6425f4468d063e2f09c1b62ccbb2236b71d3.1606161801.git.andreyknvl@google.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22 12:55:07 -08:00
Linus Torvalds
5b200f5789 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "More MM work: a memcg scalability improvememt"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/lru: revise the comments of lru_lock
  mm/lru: introduce relock_page_lruvec()
  mm/lru: replace pgdat lru_lock with lruvec lock
  mm/swap.c: serialize memcg changes in pagevec_lru_move_fn
  mm/compaction: do page isolation first in compaction
  mm/lru: introduce TestClearPageLRU()
  mm/mlock: remove __munlock_isolate_lru_page()
  mm/mlock: remove lru_lock on TestClearPageMlocked
  mm/vmscan: remove lruvec reget in move_pages_to_lru
  mm/lru: move lock into lru_note_cost
  mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn
  mm/memcg: add debug checking in lock_page_memcg
  mm: page_idle_get_page() does not need lru_lock
  mm/rmap: stop store reordering issue on page->mapping
  mm/vmscan: remove unnecessary lruvec adding
  mm/thp: narrow lru locking
  mm/thp: simplify lru_add_page_tail()
  mm/thp: use head for head page in lru_add_page_tail()
  mm/thp: move lru_add_page_tail() to huge_memory.c
2020-12-15 14:55:10 -08:00
Alex Shi
6168d0da2b mm/lru: replace pgdat lru_lock with lruvec lock
This patch moves per node lru_lock into lruvec, thus bring a lru_lock for
each of memcg per node.  So on a large machine, each of memcg don't have
to suffer from per node pgdat->lru_lock competition.  They could go fast
with their self lru_lock.

After move memcg charge before lru inserting, page isolation could
serialize page's memcg, then per memcg lruvec lock is stable and could
replace per node lru lock.

In isolate_migratepages_block(), compact_unlock_should_abort and
lock_page_lruvec_irqsave are open coded to work with compact_control.
Also add a debug func in locking which may give some clues if there are
sth out of hands.

Daniel Jordan's testing show 62% improvement on modified readtwice case on
his 2P * 10 core * 2 HT broadwell box.
https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/

Hugh Dickins helped on the patch polish, thanks!

[alex.shi@linux.alibaba.com: fix comment typo]
  Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com
[alex.shi@linux.alibaba.com: use page_memcg()]
  Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com

Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rong Chen <rong.a.chen@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 14:48:04 -08:00
Linus Torvalds
d635a69dd4 Networking updates for 5.11
Core:
 
  - support "prefer busy polling" NAPI operation mode, where we defer softirq
    for some time expecting applications to periodically busy poll
 
  - AF_XDP: improve efficiency by more batching and hindering
            the adjacency cache prefetcher
 
  - af_packet: make packet_fanout.arr size configurable up to 64K
 
  - tcp: optimize TCP zero copy receive in presence of partial or unaligned
         reads making zero copy a performance win for much smaller messages
 
  - XDP: add bulk APIs for returning / freeing frames
 
  - sched: support fragmenting IP packets as they come out of conntrack
 
  - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
 
 BPF:
 
  - BPF switch from crude rlimit-based to memcg-based memory accounting
 
  - BPF type format information for kernel modules and related tracing
    enhancements
 
  - BPF implement task local storage for BPF LSM
 
  - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
 
 Protocols:
 
  - mptcp: improve multiple xmit streams support, memory accounting and
           many smaller improvements
 
  - TLS: support CHACHA20-POLY1305 cipher
 
  - seg6: add support for SRv6 End.DT4/DT6 behavior
 
  - sctp: Implement RFC 6951: UDP Encapsulation of SCTP
 
  - ppp_generic: add ability to bridge channels directly
 
  - bridge: Connectivity Fault Management (CFM) support as is defined in
            IEEE 802.1Q section 12.14.
 
 Drivers:
 
  - mlx5: make use of the new auxiliary bus to organize the driver internals
 
  - mlx5: more accurate port TX timestamping support
 
  - mlxsw:
    - improve the efficiency of offloaded next hop updates by using
      the new nexthop object API
    - support blackhole nexthops
    - support IEEE 802.1ad (Q-in-Q) bridging
 
  - rtw88: major bluetooth co-existance improvements
 
  - iwlwifi: support new 6 GHz frequency band
 
  - ath11k: Fast Initial Link Setup (FILS)
 
  - mt7915: dual band concurrent (DBDC) support
 
  - net: ipa: add basic support for IPA v4.5
 
 Refactor:
 
  - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
 
  - phy: add support for shared interrupts; get rid of multiple driver
         APIs and have the drivers write a full IRQ handler, slight growth
 	of driver code should be compensated by the simpler API which
 	also allows shared IRQs
 
  - add common code for handling netdev per-cpu counters
 
  - move TX packet re-allocation from Ethernet switch tag drivers to
    a central place
 
  - improve efficiency and rename nla_strlcpy
 
  - number of W=1 warning cleanups as we now catch those in a patchwork
    build bot
 
 Old code removal:
 
  - wan: delete the DLCI / SDLA drivers
 
  - wimax: move to staging
 
  - wifi: remove old WDS wifi bridging support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl/YXmUACgkQMUZtbf5S
 IrvSQBAAgOrt4EFopEvVqlTHZbqI45IEqgtXS+YWmlgnjZCgshyMj8q1yK1zzane
 qYxr/NNJ9kV3FdtaynmmHPgEEEfR5kJ/D3B2BsxYDkaDDrD0vbNsBGw+L+/Gbhxl
 N/5l/9FjLyLY1D+EErknuwR5XGuQ6BSDVaKQMhYOiK2hgdnAAI4hszo8Chf6wdD0
 XDBslQ7vpD/05r+eMj0IkS5dSAoGOIFXUxhJ5dqrDbRHiKsIyWqA3PLbYemfAhxI
 s2XckjfmSgGE3FKL8PSFu+EcfHbJQQjLcULJUnqgVcdwEEtRuE9ggEi52nZRXMWM
 4e8sQJAR9Fx7pZy0G1xfS149j6iPU5LjRlU9TNSpVABz14Vvvo3gEL6gyIdsz+xh
 hMN7UBdp0FEaP028CXoIYpaBesvQqj0BSndmee8qsYAtN6j+QKcM2AOSr7JN1uMH
 C/86EDoGAATiEQIVWJvnX5MPmlAoblyLA+RuVhmxkIBx2InGXkFmWqRkXT5l4jtk
 LVl8/TArR4alSQqLXictXCjYlCm9j5N4zFFtEVasSYi7/ZoPfgRNWT+lJ2R8Y+Zv
 +htzGaFuyj6RJTVeFQMrkl3whAtBamo2a0kwg45NnxmmXcspN6kJX1WOIy82+MhD
 Yht7uplSs7MGKA78q/CDU0XBeGjpABUvmplUQBIfrR/jKLW2730=
 =GXs1
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...
2020-12-15 13:22:29 -08:00
Mauro Carvalho Chehab
a00cda3f0a mm: fix kernel-doc markups
Kernel-doc markups should use this format:
        identifier - description

Fix some issues on mm files:

1) The definition for get_user_pages_locked() doesn't follow it.  Also,
   it expects a short descrpition at the header, followed by a long one,
   after the parameters.  Fix it.

2) Kernel-doc requires that a kernel-doc markup to be immediately below
   the function prototype, as otherwise it will rename it.  So, move
   get_pfnblock_flags_mask() description to the right place.

3) Make invalidate_mapping_pagevec() to also follow the expected
   kernel-doc format.

While here, fix a few minor English syntax issues, as suggested
by Matthew:
	will used -> will be used
	similar with -> similar to

Link: https://lkml.kernel.org/r/80e85dddc92d333bc2159ee8a2294921612e8745.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Suggested-by: Mattew Wilcox <willy@infradead.org>	[English fixes]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:47 -08:00
Vlastimil Babka
f289041ed4 mm, page_poison: remove CONFIG_PAGE_POISONING_ZERO
CONFIG_PAGE_POISONING_ZERO uses the zero pattern instead of 0xAA.  It was
introduced by commit 1414c7f4f7 ("mm/page_poisoning.c: allow for zero
poisoning"), noting that using zeroes retains the benefit of sanitizing
content of freed pages, with the benefit of not having to zero them again
on alloc, and the downside of making some forms of corruption (stray
writes of NULLs) harder to detect than with the 0xAA pattern.  Together
with CONFIG_PAGE_POISONING_NO_SANITY it made possible to sanitize the
contents on free without checking it back on alloc.

These days we have the init_on_free() option to achieve sanitization with
zeroes and to save clearing on alloc (and without checking on alloc).
Arguably if someone does choose to check the poison for corruption on
alloc, the savings of not clearing the page are secondary, and it makes
sense to always use the 0xAA poison pattern.  Thus, remove the
CONFIG_PAGE_POISONING_ZERO option for being redundant.

Link: https://lkml.kernel.org/r/20201113104033.22907-6-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Mateusz Nosek <mateusznosek0@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:46 -08:00
Vlastimil Babka
8db26a3d47 mm, page_poison: use static key more efficiently
Commit 11c9c7edae ("mm/page_poison.c: replace bool variable with static
key") changed page_poisoning_enabled() to a static key check.  However,
the function is not inlined, so each check still involves a function call
with overhead not eliminated when page poisoning is disabled.

Analogically to how debug_pagealloc is handled, this patch converts
page_poisoning_enabled() back to boolean check, and introduces
page_poisoning_enabled_static() for fast paths.  Both functions are
inlined.

The function kernel_poison_pages() is also called unconditionally and does
the static key check inside.  Remove it from there and put it to callers.
Also split it to two functions kernel_poison_pages() and
kernel_unpoison_pages() instead of the confusing bool parameter.

Also optimize the check that enables page poisoning instead of
debug_pagealloc for architectures without proper debug_pagealloc support.
Move the check to init_mem_debugging_and_hardening() to enable a single
static key instead of having two static branches in
page_poisoning_enabled_static().

Link: https://lkml.kernel.org/r/20201113104033.22907-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Mateusz Nosek <mateusznosek0@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:46 -08:00
Vlastimil Babka
04013513cc mm, page_alloc: do not rely on the order of page_poison and init_on_alloc/free parameters
Patch series "cleanup page poisoning", v3.

I have identified a number of issues and opportunities for cleanup with
CONFIG_PAGE_POISON and friends:

 - interaction with init_on_alloc and init_on_free parameters depends on
   the order of parameters (Patch 1)

 - the boot time enabling uses static key, but inefficienty (Patch 2)

 - sanity checking is incompatible with hibernation (Patch 3)

 - CONFIG_PAGE_POISONING_NO_SANITY can be removed now that we have
   init_on_free (Patch 4)

 - CONFIG_PAGE_POISONING_ZERO can be most likely removed now that we
   have init_on_free (Patch 5)

This patch (of 5):

Enabling page_poison=1 together with init_on_alloc=1 or init_on_free=1
produces a warning in dmesg that page_poison takes precedence.  However,
as these warnings are printed in early_param handlers for
init_on_alloc/free, they are not printed if page_poison is enabled later
on the command line (handlers are called in the order of their
parameters), or when init_on_alloc/free is always enabled by the
respective config option - before the page_poison early param handler is
called, it is not considered to be enabled.  This is inconsistent.

We can remove the dependency on order by making the init_on_* parameters
only set a boolean variable, and postponing the evaluation after all early
params have been processed.  Introduce a new
init_mem_debugging_and_hardening() function for that, and move the related
debug_pagealloc processing there as well.

As a result init_mem_debugging_and_hardening() knows always accurately if
init_on_* and/or page_poison options were enabled.  Thus we can also
optimize want_init_on_alloc() and want_init_on_free().  We don't need to
check page_poisoning_enabled() there, we can instead not enable the
init_on_* static keys at all, if page poisoning is enabled.  This results
in a simpler and more effective code.

Link: https://lkml.kernel.org/r/20201113104033.22907-1-vbabka@suse.cz
Link: https://lkml.kernel.org/r/20201113104033.22907-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mateusz Nosek <mateusznosek0@gmail.com>
Cc: Laura Abbott <labbott@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:46 -08:00
Johannes Weiner
597c892038 mm: don't wake kswapd prematurely when watermark boosting is disabled
On 2-node NUMA hosts we see bursts of kswapd reclaim and subsequent
pressure spikes and stalls from cache refaults while there is plenty of
free memory in the system.

Usually, kswapd is woken up when all eligible nodes in an allocation are
full.  But the code related to watermark boosting can wake kswapd on one
full node while the other one is mostly empty.  This may be justified to
fight fragmentation, but is currently unconditionally done whether
watermark boosting is occurring or not.

In our case, many of our workloads' throughput scales with available
memory, and pure utilization is a more tangible concern than trends
around longer-term fragmentation.  As a result we generally disable
watermark boosting.

Wake kswapd only woken when watermark boosting is requested.

Link: https://lkml.kernel.org/r/20201020175833.397286-1-hannes@cmpxchg.org
Fixes: 1c30844d2d ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:45 -08:00
Muchun Song
7ad69832f3 mm/page_alloc: speed up the iteration of max_order
When we free a page whose order is very close to MAX_ORDER and greater
than pageblock_order, it wastes some CPU cycles to increase max_order to
MAX_ORDER one by one and check the pageblock migratetype of that page
repeatedly especially when MAX_ORDER is much larger than pageblock_order.

We also should not be checking migratetype of buddy when "order ==
MAX_ORDER - 1" as the buddy pfn may be invalid, so adjust the condition.
With the new check, we don't need the max_order check anymore, so we
replace it.

Also adjust max_order initialization so that it's lower by one than
previously, which makes the code hopefully more clear.

Link: https://lkml.kernel.org/r/20201204155109.55451-1-songmuchun@bytedance.com
Fixes: d9dddbf556 ("mm/page_alloc: prevent merging between isolated and other pageblocks")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:44 -08:00
Lorenzo Stoakes
470c61d702 mm: page_alloc: refactor setup_per_zone_lowmem_reserve()
setup_per_zone_lowmem_reserve() iterates through each zone setting
zone->lowmem_reserve[j] = 0 (where j is the zone's index) then iterates
backwards through all preceding zones, setting
lower_zone->lowmem_reserve[j] = sum(managed pages of higher zones) /
lowmem_reserve_ratio[idx] for each (where idx is the lower zone's index).

If the lower zone has no managed pages or its ratio is 0 then all of its
lowmem_reserve[] entries are effectively zeroed.

As these arrays are only assigned here and all lowmem_reserve[] entries
for index < this zone's index are implicitly assumed to be 0 (as these are
specifically output in show_free_areas() and zoneinfo_show_print() for
example) there is no need to additionally zero index == this zone's index
too.  This patch avoids zeroing unnecessarily.

Rather than iterating through zones and setting lowmem_reserve[j] for each
lower zone this patch reverse the process and populates each zone's
lowmem_reserve[] values in ascending order.

This clarifies what is going on especially in the case of zero managed
pages or ratio which is now explicitly shown to clear these values.

Link: https://lkml.kernel.org/r/20201129162758.115907-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:44 -08:00
Lin Feng
ba8f3587f5 init/main: fix broken buffer_init when DEFERRED_STRUCT_PAGE_INIT set
In the booting phase if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set,
we have following callchain:

start_kernel
...
  mm_init
    mem_init
     memblock_free_all
       reset_all_zones_managed_pages
       free_low_memory_core_early
...
  buffer_init
    nr_free_buffer_pages
      zone->managed_pages
...
  rest_init
    kernel_init
      kernel_init_freeable
        page_alloc_init_late
          kthread_run(deferred_init_memmap, NODE_DATA(nid), "pgdatinit%d", nid);
          wait_for_completion(&pgdat_init_all_done_comp);
          ...
          files_maxfiles_init

It's clear that buffer_init depends on zone->managed_pages, but it's reset
in reset_all_zones_managed_pages after that pages are readded into
zone->managed_pages, but when buffer_init runs this process is half done
and most of them will finally be added till deferred_init_memmap done.  In
large memory couting of nr_free_buffer_pages drifts too much, also
drifting from kernels to kernels on same hardware.

Fix is simple, it delays buffer_init run till deferred_init_memmap all
done.

But as corrected by this patch, max_buffer_heads becomes very large, the
value is roughly as many as 4 times of totalram_pages, formula:
max_buffer_heads = nrpages * (10%) * (PAGE_SIZE / sizeof(struct
buffer_head));

Say in a 64GB memory box we have 16777216 pages, then max_buffer_heads
turns out to be roughly 67,108,864.  In common cases, should a buffer_head
be mapped to one page/block(4KB)?  So max_buffer_heads never exceeds
totalram_pages.  IMO it's likely to make buffer_heads_over_limit bool
value alwasy false, then make codes 'if (buffer_heads_over_limit)' test in
vmscan unnecessary.

So this patch will change the original behavior related to
buffer_heads_over_limit in vmscan since we used a half done value of
zone->managed_pages before, or should we use a smaller factor(<10%) in
previous formula.

akpm: I think this is OK - the max_buffer_heads code is only needed on
highmem machines, to prevent ZONE_NORMAL from being consumed by large
amounts of buffer_heads attached to highmem pagecache.  This problem will
not occur on 64-bit machines, so this feature's non-functionality on such
machines is a feature, not a bug.

Link: https://lkml.kernel.org/r/20201123110500.103523-1-linf@wangsu.com
Signed-off-by: Lin Feng <linf@wangsu.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:44 -08:00
David Hildenbrand
862b6dee20 mm/page_alloc: clear all pages in post_alloc_hook() with init_on_alloc=1
commit 6471384af2 ("mm: security: introduce init_on_alloc=1 and
init_on_free=1 boot options") resulted with init_on_alloc=1 in all pages
leaving the buddy via alloc_pages() and friends to be
initialized/cleared/zeroed on allocation.

However, the same logic is currently not applied to alloc_contig_pages():
allocated pages leaving the buddy aren't cleared with init_on_alloc=1 and
init_on_free=0.  Let's also properly clear pages on that allocation path.

To achieve that, let's move clearing into post_alloc_hook().  This will
not only affect alloc_contig_pages() allocations but also any pages used
as migration target in compaction code via compaction_alloc().

While this sounds sub-optimal, it's the very same handling as when
allocating migration targets via alloc_migration_target() - pages will get
properly cleared with init_on_free=1.  In case we ever want to optimize
migration in that regard, we should tackle all such migration users - if
we believe migration code can be fully trusted.

With this change, we will see double clearing of pages in some cases.  One
example are gigantic pages (either allocated via CMA, or allocated
dynamically via alloc_contig_pages()) - which is the right thing to do
(and to be optimized outside of the buddy in the callers) as discussed in:
https://lkml.kernel.org/r/20201019182853.7467-1-gpiccoli@canonical.com

This change implies that with init_on_alloc=1

 - All CMA allocations will be cleared

 - Gigantic pages allocated via alloc_contig_pages() will be cleared

 - virtio-mem memory to be unplugged will be cleared. While this is
   suboptimal, it's similar to memory balloon drivers handling, where
   all pages to be inflated will get cleared as well.

 - Pages isolated for compaction will be cleared

Link: https://lkml.kernel.org/r/20201120180452.19071-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:44 -08:00
Zou Wei
3b1f3658c7 mm/page_alloc: mark some symbols with static keyword
Fix the following sparse warnings:

  mm/page_alloc.c:3040:6: warning: symbol '__drain_all_pages' was not declared. Should it be static?
  mm/page_alloc.c:6349:6: warning: symbol '__zone_set_pageset_high_and_batch' was not declared. Should it be static?

Link: https://lkml.kernel.org/r/1605517365-65858-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Matthew Wilcox (Oracle)
7f194fbb2d mm/page_alloc: add __free_pages() documentation
Provide some guidance towards when this might not be the right interface
to use.

Link: https://lkml.kernel.org/r/20201027025523.3235-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Vlastimil Babka
ec6e8c7e03 mm, page_alloc: disable pcplists during memory offline
Memory offlining relies on page isolation to guarantee a forward progress
because pages cannot be reused while they are isolated.  But the page
isolation itself doesn't prevent from races while freed pages are stored
on pcp lists and thus can be reused.  This can be worked around by
repeated draining of pcplists, as done by commit 9683182612
("mm/memory_hotplug: drain per-cpu pages again during memory offline").

David and Michal would prefer that this race was closed in a way that
callers of page isolation who need stronger guarantees don't need to
repeatedly drain.  David suggested disabling pcplists usage completely
during page isolation, instead of repeatedly draining them.

To achieve this without adding special cases in alloc/free fastpath, we
can use the same approach as boot pagesets - when pcp->high is 0, any
pcplist addition will be immediately flushed.

The race can thus be closed by setting pcp->high to 0 and draining
pcplists once, before calling start_isolate_page_range().  The draining
will serialize after processes that already disabled interrupts and read
the old value of pcp->high in free_unref_page_commit(), and processes that
have not yet disabled interrupts, will observe pcp->high == 0 when they
are rescheduled, and skip pcplists.  This guarantees no stray pages on
pcplists in zones where isolation happens.

This patch thus adds zone_pcp_disable() and zone_pcp_enable() functions
that page isolation users can call before start_isolate_page_range() and
after unisolating (or offlining) the isolated pages.

Also, drain_all_pages() is optimized to only execute on cpus where
pcplists are not empty.  The check can however race with a free to pcplist
that has not yet increased the pcp->count from 0 to 1.  Thus make the
drain optionally skip the racy check and drain on all cpus, and use this
option in zone_pcp_disable().

As we have to avoid external updates to high and batch while pcplists are
disabled, we take pcp_batch_high_lock in zone_pcp_disable() and release it
in zone_pcp_enable().  This also synchronizes multiple users of
zone_pcp_disable()/enable().

Currently the only user of this functionality is offline_pages().

[vbabka@suse.cz: add comment, per David]
  Link: https://lkml.kernel.org/r/527480ef-ed72-e1c1-52a0-1c5b0113df45@suse.cz

Link: https://lkml.kernel.org/r/20201111092812.11329-8-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Vlastimil Babka
7612921f23 mm, page_alloc: move draining pcplists to page isolation users
Currently, pcplists are drained during set_migratetype_isolate() which
means once per pageblock processed start_isolate_page_range().  This is
somewhat wasteful.  Moreover, the callers might need different guarantees,
and the draining is currently prone to races and does not guarantee that
no page from isolated pageblock will end up on the pcplist after the
drain.

Better guarantees are added by later patches and require explicit actions
by page isolation users that need them.  Thus it makes sense to move the
current imperfect draining to the callers also as a preparation step.

Link: https://lkml.kernel.org/r/20201111092812.11329-7-vbabka@suse.cz
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Vlastimil Babka
952eaf8159 mm, page_alloc: cache pageset high and batch in struct zone
All per-cpu pagesets for a zone use the same high and batch values, that
are duplicated there just for performance (locality) reasons.  This patch
adds the same variables also to struct zone as a shared copy.

This will be useful later for making possible to disable pcplists
temporarily by setting high value to 0, while remembering the values for
restoring them later.  But we can also immediately benefit from not
updating pagesets of all possible cpus in case the newly recalculated
values (after sysctl change or memory online/offline) are actually
unchanged from the previous ones.

Link: https://lkml.kernel.org/r/20201111092812.11329-6-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Vlastimil Babka
5c3ad2eb71 mm, page_alloc: simplify pageset_update()
pageset_update() attempts to update pcplist's high and batch values in a
way that readers don't observe batch > high.  It uses smp_wmb() to order
the updates in a way to achieve this.  However, without proper pairing
read barriers in readers this guarantee doesn't hold, and there are no
such barriers in e.g.  free_unref_page_commit().

Commit 88e8ac11d2 ("mm, page_alloc: fix core hung in
free_pcppages_bulk()") already showed this is problematic, and solved this
by ultimately only trusing pcp->count of the current cpu with interrupts
disabled.

The update dance with unpaired write barriers thus makes no sense.
Replace them with plain WRITE_ONCE to prevent store tearing, and document
that the values can change asynchronously and should not be trusted for
correctness.

All current readers appear to be OK after 88e8ac11d2.  Convert them to
READ_ONCE to prevent unnecessary read tearing, but mainly to alert anybody
making future changes to the code that special care is needed.

Link: https://lkml.kernel.org/r/20201111092812.11329-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Vlastimil Babka
69a8396a26 mm, page_alloc: remove setup_pageset()
We initialize boot-time pagesets with setup_pageset(), which sets high and
batch values that effectively disable pcplists.

We can remove this wrapper if we just set these values for all pagesets in
pageset_init().  Non-boot pagesets then subsequently update them to the
proper values.

No functional change.

Link: https://lkml.kernel.org/r/20201111092812.11329-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Vlastimil Babka
0a8b4f1d5b mm, page_alloc: calculate pageset high and batch once per zone
We currently call pageset_set_high_and_batch() for each possible cpu,
which repeats the same calculations of high and batch values.

Instead call the function just once per zone, and make it apply the
calculated values to all per-cpu pagesets of the zone.

This also allows removing the zone_pageset_init() and __zone_pcp_update()
wrappers.

No functional change.

Link: https://lkml.kernel.org/r/20201111092812.11329-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Vlastimil Babka
7115ac6ef0 mm, page_alloc: clean up pageset high and batch update
Patch series "disable pcplists during memory offline", v3.

As per the discussions [1] [2] this is an attempt to implement David's
suggestion that page isolation should disable pcplists to avoid races with
page freeing in progress.  This is done without extra checks in fast
paths, as explained in Patch 9.  The repeated draining done by [2] is then
no longer needed.  Previous version (RFC) is at [3].

The RFC tried to hide pcplists disabling/enabling into page isolation, but
it wasn't completely possible, as memory offline does not unisolation.
Michal suggested an explicit API in [4] so that's the current
implementation and it seems indeed nicer.

Once we accept that page isolation users need to do explicit actions
around it depending on the needed guarantees, we can also IMHO accept that
the current pcplist draining can be also done by the callers, which is
more effective.  After all, there are only two users of page isolation.
So patch 6 does effectively the same thing as Pavel proposed in [5], and
patch 7 implement stronger guarantees only for memory offline.  If CMA
decides to opt-in to the stronger guarantee, it can be added later.

Patches 1-5 are preparatory cleanups for pcplist disabling.

Patchset was briefly tested in QEMU so that memory online/offline works,
but I haven't done a stress test that would prove the race fixed by [2] is
eliminated.

Note that patch 7 could be avoided if we instead adjusted page freeing in
shown in [6], but I believe the current implementation of disabling
pcplists is not too much complex, so I would prefer this instead of adding
new checks and longer irq-disabled section into page freeing hotpaths.

[1] https://lore.kernel.org/linux-mm/20200901124615.137200-1-pasha.tatashin@soleen.com/
[2] https://lore.kernel.org/linux-mm/20200903140032.380431-1-pasha.tatashin@soleen.com/
[3] https://lore.kernel.org/linux-mm/20200907163628.26495-1-vbabka@suse.cz/
[4] https://lore.kernel.org/linux-mm/20200909113647.GG7348@dhcp22.suse.cz/
[5] https://lore.kernel.org/linux-mm/20200904151448.100489-3-pasha.tatashin@soleen.com/
[6] https://lore.kernel.org/linux-mm/3d3b53db-aeaa-ff24-260b-36427fac9b1c@suse.cz/
[7] https://lore.kernel.org/linux-mm/20200922143712.12048-1-vbabka@suse.cz/
[8] https://lore.kernel.org/linux-mm/20201008114201.18824-1-vbabka@suse.cz/

This patch (of 7):

The updates to pcplists' high and batch values are handled by multiple
functions that make the calculations hard to follow.  Consolidate
everything to pageset_set_high_and_batch() and remove pageset_set_batch()
and pageset_set_high() wrappers.

The only special case using one of the removed wrappers was:
build_all_zonelists_init()

  setup_pageset()
    pageset_set_batch()

which was hardcoding batch as 0, so we can just open-code a call to
pageset_update() with constant parameters instead.

No functional change.

Link: https://lkml.kernel.org/r/20201111092812.11329-1-vbabka@suse.cz
Link: https://lkml.kernel.org/r/20201111092812.11329-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Mike Rapoport
77bc7fd607 mm: introduce debug_pagealloc_{map,unmap}_pages() helpers
Patch series "arch, mm: improve robustness of direct map manipulation", v7.

During recent discussion about KVM protected memory, David raised a
concern about usage of __kernel_map_pages() outside of DEBUG_PAGEALLOC
scope [1].

Indeed, for architectures that define CONFIG_ARCH_HAS_SET_DIRECT_MAP it is
possible that __kernel_map_pages() would fail, but since this function is
void, the failure will go unnoticed.

Moreover, there's lack of consistency of __kernel_map_pages() semantics
across architectures as some guard this function with #ifdef
DEBUG_PAGEALLOC, some refuse to update the direct map if page allocation
debugging is disabled at run time and some allow modifying the direct map
regardless of DEBUG_PAGEALLOC settings.

This set straightens this out by restoring dependency of
__kernel_map_pages() on DEBUG_PAGEALLOC and updating the call sites
accordingly.

Since currently the only user of __kernel_map_pages() outside
DEBUG_PAGEALLOC is hibernation, it is updated to make direct map accesses
there more explicit.

[1] https://lore.kernel.org/lkml/2759b4bf-e1e3-d006-7d86-78a40348269d@redhat.com

This patch (of 4):

When CONFIG_DEBUG_PAGEALLOC is enabled, it unmaps pages from the kernel
direct mapping after free_pages().  The pages than need to be mapped back
before they could be used.  Theese mapping operations use
__kernel_map_pages() guarded with with debug_pagealloc_enabled().

The only place that calls __kernel_map_pages() without checking whether
DEBUG_PAGEALLOC is enabled is the hibernation code that presumes
availability of this function when ARCH_HAS_SET_DIRECT_MAP is set.  Still,
on arm64, __kernel_map_pages() will bail out when DEBUG_PAGEALLOC is not
enabled but set_direct_map_invalid_noflush() may render some pages not
present in the direct map and hibernation code won't be able to save such
pages.

To make page allocation debugging and hibernation interaction more robust,
the dependency on DEBUG_PAGEALLOC or ARCH_HAS_SET_DIRECT_MAP has to be
made more explicit.

Start with combining the guard condition and the call to
__kernel_map_pages() into debug_pagealloc_map_pages() and
debug_pagealloc_unmap_pages() functions to emphasize that
__kernel_map_pages() should not be called without DEBUG_PAGEALLOC and use
these new functions to map/unmap pages when page allocation debugging is
enabled.

Link: https://lkml.kernel.org/r/20201109192128.960-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20201109192128.960-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:43 -08:00
Mike Rapoport
03e92a5e09 ia64: remove custom __early_pfn_to_nid()
The ia64 implementation of __early_pfn_to_nid() essentially relies on the
same data as the generic implementation.

The correspondence between memory ranges and nodes is set in memblock
during early memory initialization in register_active_ranges() function.

The initialization of sparsemem that requires early_pfn_to_nid() happens
later and it can use the memblock information like the other architectures.

Link: https://lkml.kernel.org/r/20201101170454.9567-3-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:42 -08:00
Daniel Vetter
f920e413ff mm: track mmu notifiers in fs_reclaim_acquire/release
fs_reclaim_acquire/release nicely catch recursion issues when allocating
GFP_KERNEL memory against shrinkers (which gpu drivers tend to use to keep
the excessive caches in check).  For mmu notifier recursions we do have
lockdep annotations since 23b68395c7 ("mm/mmu_notifiers: add a lockdep
map for invalidate_range_start/end").

But these only fire if a path actually results in some pte invalidation -
for most small allocations that's very rarely the case.  The other trouble
is that pte invalidation can happen any time when __GFP_RECLAIM is set.
Which means only really GFP_ATOMIC is a safe choice, GFP_NOIO isn't good
enough to avoid potential mmu notifier recursion.

I was pondering whether we should just do the general annotation, but
there's always the risk for false positives.  Plus I'm assuming that the
core fs and io code is a lot better reviewed and tested than random mmu
notifier code in drivers.  Hence why I decide to only annotate for that
specific case.

Furthermore even if we'd create a lockdep map for direct reclaim, we'd
still need to explicit pull in the mmu notifier map - there's a lot more
places that do pte invalidation than just direct reclaim, these two
contexts arent the same.

Note that the mmu notifiers needing their own independent lockdep map is
also the reason we can't hold them from fs_reclaim_acquire to
fs_reclaim_release - it would nest with the acquistion in the pte
invalidation code, causing a lockdep splat.  And we can't remove the
annotations from pte invalidation and all the other places since they're
called from many other places than page reclaim.  Hence we can only do the
equivalent of might_lock, but on the raw lockdep map.

With this we can also remove the lockdep priming added in 66204f1d2d
("mm/mmu_notifiers: prime lockdep") since the new annotations are strictly
more powerful.

Link: https://lkml.kernel.org/r/20201125162532.1299794-2-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Hellström (Intel) <thomas_os@shipmail.org>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:41 -08:00
Shakeel Butt
f0c0c115fb mm: memcontrol: account pagetables per node
For many workloads, pagetable consumption is significant and it makes
sense to expose it in the memory.stat for the memory cgroups.  However at
the moment, the pagetables are accounted per-zone.  Converting them to
per-node and using the right interface will correctly account for the
memory cgroups as well.

[akpm@linux-foundation.org: export __mod_lruvec_page_state to modules for arch/mips/kvm/]

Link: https://lkml.kernel.org/r/20201130212541.2781790-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:40 -08:00
Jakub Kicinski
a1dd1d8697 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-12-03

The main changes are:

1) Support BTF in kernel modules, from Andrii.

2) Introduce preferred busy-polling, from Björn.

3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.

4) Memcg-based memory accounting for bpf objects, from Roman.

5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
  selftests/bpf: Fix invalid use of strncat in test_sockmap
  libbpf: Use memcpy instead of strncpy to please GCC
  selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
  selftests/bpf: Add tp_btf CO-RE reloc test for modules
  libbpf: Support attachment of BPF tracing programs to kernel modules
  libbpf: Factor out low-level BPF program loading helper
  bpf: Allow to specify kernel module BTFs when attaching BPF programs
  bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
  selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
  selftests/bpf: Add support for marking sub-tests as skipped
  selftests/bpf: Add bpf_testmod kernel module for testing
  libbpf: Add kernel module BTF support for CO-RE relocations
  libbpf: Refactor CO-RE relocs to not assume a single BTF object
  libbpf: Add internal helper to load BTF data by FD
  bpf: Keep module's btf_data_size intact after load
  bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
  selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
  bpf: Adds support for setting window clamp
  samples/bpf: Fix spelling mistake "recieving" -> "receiving"
  bpf: Fix cold build of test_progs-no_alu32
  ...
====================

Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 07:48:12 -08:00
Roman Gushchin
18b2db3b03 mm: Convert page kmemcg type to a page memcg flag
PageKmemcg flag is currently defined as a page type (like buddy, offline,
table and guard).  Semantically it means that the page was accounted as a
kernel memory by the page allocator and has to be uncharged on the
release.

As a side effect of defining the flag as a page type, the accounted page
can't be mapped to userspace (look at page_has_type() and comments above).
In particular, this blocks the accounting of vmalloc-backed memory used
by some bpf maps, because these maps do map the memory to userspace.

One option is to fix it by complicating the access to page->mapcount,
which provides some free bits for page->page_type.

But it's way better to move this flag into page->memcg_data flags.
Indeed, the flag makes no sense without enabled memory cgroups and memory
cgroup pointer set in particular.

This commit replaces PageKmemcg() and __SetPageKmemcg() with
PageMemcgKmem() and an open-coded OR operation setting the memcg pointer
with the MEMCG_DATA_KMEM bit.  __ClearPageKmemcg() can be simple deleted,
as the whole memcg_data is zeroed at once.

As a bonus, on !CONFIG_MEMCG build the PageMemcgKmem() check will be
compiled out.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-5-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-5-guro@fb.com
2020-12-02 18:28:06 -08:00
Roman Gushchin
bcfe06bf26 mm: memcontrol: Use helpers to read page's memcg data
Patch series "mm: allow mapping accounted kernel pages to userspace", v6.

Currently a non-slab kernel page which has been charged to a memory cgroup
can't be mapped to userspace.  The underlying reason is simple: PageKmemcg
flag is defined as a page type (like buddy, offline, etc), so it takes a
bit from a page->mapped counter.  Pages with a type set can't be mapped to
userspace.

But in general the kmemcg flag has nothing to do with mapping to
userspace.  It only means that the page has been accounted by the page
allocator, so it has to be properly uncharged on release.

Some bpf maps are mapping the vmalloc-based memory to userspace, and their
memory can't be accounted because of this implementation detail.

This patchset removes this limitation by moving the PageKmemcg flag into
one of the free bits of the page->mem_cgroup pointer.  Also it formalizes
accesses to the page->mem_cgroup and page->obj_cgroups using new helpers,
adds several checks and removes a couple of obsolete functions.  As the
result the code became more robust with fewer open-coded bit tricks.

This patch (of 4):

Currently there are many open-coded reads of the page->mem_cgroup pointer,
as well as a couple of read helpers, which are barely used.

It creates an obstacle on a way to reuse some bits of the pointer for
storing additional bits of information.  In fact, we already do this for
slab pages, where the last bit indicates that a pointer has an attached
vector of objcg pointers instead of a regular memcg pointer.

This commits uses 2 existing helpers and introduces a new helper to
converts all read sides to calls of these helpers:
  struct mem_cgroup *page_memcg(struct page *page);
  struct mem_cgroup *page_memcg_rcu(struct page *page);
  struct mem_cgroup *page_memcg_check(struct page *page);

page_memcg_check() is intended to be used in cases when the page can be a
slab page and have a memcg pointer pointing at objcg vector.  It does
check the lowest bit, and if set, returns NULL.  page_memcg() contains a
VM_BUG_ON_PAGE() check for the page not being a slab page.

To make sure nobody uses a direct access, struct page's
mem_cgroup/obj_cgroups is converted to unsigned long memcg_data.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-1-guro@fb.com
Link: https://lkml.kernel.org/r/20201027001657.3398190-2-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-2-guro@fb.com
2020-12-02 18:28:05 -08:00
Dongli Zhang
d8c19014bb page_frag: Recover from memory pressure
The ethernet driver may allocate skb (and skb->data) via napi_alloc_skb().
This ends up to page_frag_alloc() to allocate skb->data from
page_frag_cache->va.

During the memory pressure, page_frag_cache->va may be allocated as
pfmemalloc page. As a result, the skb->pfmemalloc is always true as
skb->data is from page_frag_cache->va. The skb will be dropped if the
sock (receiver) does not have SOCK_MEMALLOC. This is expected behaviour
under memory pressure.

However, once kernel is not under memory pressure any longer (suppose large
amount of memory pages are just reclaimed), the page_frag_alloc() may still
re-use the prior pfmemalloc page_frag_cache->va to allocate skb->data. As a
result, the skb->pfmemalloc is always true unless page_frag_cache->va is
re-allocated, even if the kernel is not under memory pressure any longer.

Here is how kernel runs into issue.

1. The kernel is under memory pressure and allocation of
PAGE_FRAG_CACHE_MAX_ORDER in __page_frag_cache_refill() will fail. Instead,
the pfmemalloc page is allocated for page_frag_cache->va.

2: All skb->data from page_frag_cache->va (pfmemalloc) will have
skb->pfmemalloc=true. The skb will always be dropped by sock without
SOCK_MEMALLOC. This is an expected behaviour.

3. Suppose a large amount of pages are reclaimed and kernel is not under
memory pressure any longer. We expect skb->pfmemalloc drop will not happen.

4. Unfortunately, page_frag_alloc() does not proactively re-allocate
page_frag_alloc->va and will always re-use the prior pfmemalloc page. The
skb->pfmemalloc is always true even kernel is not under memory pressure any
longer.

Fix this by freeing and re-allocating the page instead of recycling it.

References: https://lore.kernel.org/lkml/20201103193239.1807-1-dongli.zhang@oracle.com/
References: https://lore.kernel.org/linux-mm/20201105042140.5253-1-willy@infradead.org/
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: Bert Barbe <bert.barbe@oracle.com>
Cc: Rama Nichanamatlu <rama.nichanamatlu@oracle.com>
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Cc: Manjunath Patil <manjunath.b.patil@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: SRINIVAS <srinivas.eeda@oracle.com>
Fixes: 79930f5892 ("net: do not deplete pfmemalloc reserve")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201115201029.11903-1-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18 15:21:56 -08:00
Linus Torvalds
c4cf498dc0 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "155 patches.

  Subsystems affected by this patch series: mm (dax, debug, thp,
  readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
  core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
  binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
  romfs, and fault-injection"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
  lib, uaccess: add failure injection to usercopy functions
  lib, include/linux: add usercopy failure capability
  ROMFS: support inode blocks calculation
  ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
  sched.h: drop in_ubsan field when UBSAN is in trap mode
  scripts/gdb/tasks: add headers and improve spacing format
  scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
  kernel/relay.c: drop unneeded initialization
  panic: dump registers on panic_on_warn
  rapidio: fix the missed put_device() for rio_mport_add_riodev
  rapidio: fix error handling path
  nilfs2: fix some kernel-doc warnings for nilfs2
  autofs: harden ioctl table
  ramfs: fix nommu mmap with gaps in the page cache
  mm: remove the now-unnecessary mmget_still_valid() hack
  mm/gup: take mmap_lock in get_dump_page()
  binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
  coredump: rework elf/elf_fdpic vma_dump_size() into common helper
  coredump: refactor page range dumping into common helper
  coredump: let dump_emit() bail out on short writes
  ...
2020-10-16 11:31:55 -07:00
Matthew Wilcox (Oracle)
ab130f9108 mm: rename page_order() to buddy_order()
The current page_order() can only be called on pages in the buddy
allocator.  For compound pages, you have to use compound_order().  This is
confusing and led to a bug, so rename page_order() to buddy_order().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201001152259.14932-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:19 -07:00
David Hildenbrand
7fef431be9 mm/page_alloc: place pages to tail in __free_pages_core()
__free_pages_core() is used when exposing fresh memory to the buddy during
system boot and when onlining memory in generic_online_page().

generic_online_page() is used in two cases:

1. Direct memory onlining in online_pages().
2. Deferred memory onlining in memory-ballooning-like mechanisms (HyperV
   balloon and virtio-mem), when parts of a section are kept
   fake-offline to be fake-onlined later on.

In 1, we already place pages to the tail of the freelist.  Pages will be
freed to MIGRATE_ISOLATE lists first and moved to the tail of the
freelists via undo_isolate_page_range().

In 2, we currently don't implement a proper rule.  In case of virtio-mem,
where we currently always online MAX_ORDER - 1 pages, the pages will be
placed to the HEAD of the freelist - undesireable.  While the hyper-v
balloon calls generic_online_page() with single pages, usually it will
call it on successive single pages in a larger block.

The pages are fresh, so place them to the tail of the freelist and avoid
the PCP.  In __free_pages_core(), remove the now superflouos call to
set_page_refcounted() and add a comment regarding page initialization and
the refcount.

Note: In 2.  we currently don't shuffle.  If ever relevant (page shuffling
is usually of limited use in virtualized environments), we might want to
shuffle after a sequence of generic_online_page() calls in the relevant
callers.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Link: https://lkml.kernel.org/r/20201005121534.15649-5-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:18 -07:00
David Hildenbrand
293ffa5ebb mm/page_alloc: move pages to tail in move_to_free_list()
Whenever we move pages between freelists via move_to_free_list()/
move_freepages_block(), we don't actually touch the pages:
1. Page isolation doesn't actually touch the pages, it simply isolates
   pageblocks and moves all free pages to the MIGRATE_ISOLATE freelist.
   When undoing isolation, we move the pages back to the target list.
2. Page stealing (steal_suitable_fallback()) moves free pages directly
   between lists without touching them.
3. reserve_highatomic_pageblock()/unreserve_highatomic_pageblock() moves
   free pages directly between freelists without touching them.

We already place pages to the tail of the freelists when undoing isolation
via __putback_isolated_page(), let's do it in any case (e.g., if order <=
pageblock_order) and document the behavior. To simplify, let's move the
pages to the tail for all move_to_free_list()/move_freepages_block() users.

In 2., the target list is empty, so there should be no change.  In 3., we
might observe a change, however, highatomic is more concerned about
allocations succeeding than cache hotness - if we ever realize this change
degrades a workload, we can special-case this instance and add a proper
comment.

This change results in all pages getting onlined via online_pages() to be
placed to the tail of the freelist.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Link: https://lkml.kernel.org/r/20201005121534.15649-4-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:18 -07:00
David Hildenbrand
47b6a24a23 mm/page_alloc: place pages to tail in __putback_isolated_page()
__putback_isolated_page() already documents that pages will be placed to
the tail of the freelist - this is, however, not the case for "order >=
MAX_ORDER - 2" (see buddy_merge_likely()) - which should be the case for
all existing users.

This change affects two users:
- free page reporting
- page isolation, when undoing the isolation (including memory onlining).

This behavior is desirable for pages that haven't really been touched
lately, so exactly the two users that don't actually read/write page
content, but rather move untouched pages.

The new behavior is especially desirable for memory onlining, where we
allow allocation of newly onlined pages via undo_isolate_page_range() in
online_pages().  Right now, we always place them to the head of the
freelist, resulting in undesireable behavior: Assume we add individual
memory chunks via add_memory() and online them right away to the NORMAL
zone.  We create a dependency chain of unmovable allocations e.g., via the
memmap.  The memmap of the next chunk will be placed onto previous chunks
- if the last block cannot get offlined+removed, all dependent ones cannot
get offlined+removed.  While this can already be observed with individual
DIMMs, it's more of an issue for virtio-mem (and I suspect also ppc
DLPAR).

Document that this should only be used for optimizations, and no code
should rely on this behavior for correction (if the order of the freelists
ever changes).

We won't care about page shuffling: memory onlining already properly
shuffles after onlining.  free page reporting doesn't care about
physically contiguous ranges, and there are already cases where page
isolation will simply move (physically close) free pages to (currently)
the head of the freelists via move_freepages_block() instead of shuffling.
If this becomes ever relevant, we should shuffle the whole zone when
undoing isolation of larger ranges, and after free_contig_range().

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Link: https://lkml.kernel.org/r/20201005121534.15649-3-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:18 -07:00
David Hildenbrand
f04a5d5d91 mm/page_alloc: convert "report" flag of __free_one_page() to a proper flag
Patch series "mm: place pages to the freelist tail when onlining and undoing isolation", v2.

When adding separate memory blocks via add_memory*() and onlining them
immediately, the metadata (especially the memmap) of the next block will
be placed onto one of the just added+onlined block.  This creates a chain
of unmovable allocations: If the last memory block cannot get
offlined+removed() so will all dependent ones.  We directly have unmovable
allocations all over the place.

This can be observed quite easily using virtio-mem, however, it can also
be observed when using DIMMs.  The freshly onlined pages will usually be
placed to the head of the freelists, meaning they will be allocated next,
turning the just-added memory usually immediately un-removable.  The fresh
pages are cold, prefering to allocate others (that might be hot) also
feels to be the natural thing to do.

It also applies to the hyper-v balloon xen-balloon, and ppc64 dlpar: when
adding separate, successive memory blocks, each memory block will have
unmovable allocations on them - for example gigantic pages will fail to
allocate.

While the ZONE_NORMAL doesn't provide any guarantees that memory can get
offlined+removed again (any kind of fragmentation with unmovable
allocations is possible), there are many scenarios (hotplugging a lot of
memory, running workload, hotunplug some memory/as much as possible) where
we can offline+remove quite a lot with this patchset.

a) To visualize the problem, a very simple example:

Start a VM with 4GB and 8GB of virtio-mem memory:

 [root@localhost ~]# lsmem
 RANGE                                 SIZE  STATE REMOVABLE  BLOCK
 0x0000000000000000-0x00000000bfffffff   3G online       yes   0-23
 0x0000000100000000-0x000000033fffffff   9G online       yes 32-103

 Memory block size:       128M
 Total online memory:      12G
 Total offline memory:      0B

Then try to unplug as much as possible using virtio-mem. Observe which
memory blocks are still around. Without this patch set:

 [root@localhost ~]# lsmem
 RANGE                                  SIZE  STATE REMOVABLE   BLOCK
 0x0000000000000000-0x00000000bfffffff    3G online       yes    0-23
 0x0000000100000000-0x000000013fffffff    1G online       yes   32-39
 0x0000000148000000-0x000000014fffffff  128M online       yes      41
 0x0000000158000000-0x000000015fffffff  128M online       yes      43
 0x0000000168000000-0x000000016fffffff  128M online       yes      45
 0x0000000178000000-0x000000017fffffff  128M online       yes      47
 0x0000000188000000-0x0000000197ffffff  256M online       yes   49-50
 0x00000001a0000000-0x00000001a7ffffff  128M online       yes      52
 0x00000001b0000000-0x00000001b7ffffff  128M online       yes      54
 0x00000001c0000000-0x00000001c7ffffff  128M online       yes      56
 0x00000001d0000000-0x00000001d7ffffff  128M online       yes      58
 0x00000001e0000000-0x00000001e7ffffff  128M online       yes      60
 0x00000001f0000000-0x00000001f7ffffff  128M online       yes      62
 0x0000000200000000-0x0000000207ffffff  128M online       yes      64
 0x0000000210000000-0x0000000217ffffff  128M online       yes      66
 0x0000000220000000-0x0000000227ffffff  128M online       yes      68
 0x0000000230000000-0x0000000237ffffff  128M online       yes      70
 0x0000000240000000-0x0000000247ffffff  128M online       yes      72
 0x0000000250000000-0x0000000257ffffff  128M online       yes      74
 0x0000000260000000-0x0000000267ffffff  128M online       yes      76
 0x0000000270000000-0x0000000277ffffff  128M online       yes      78
 0x0000000280000000-0x0000000287ffffff  128M online       yes      80
 0x0000000290000000-0x0000000297ffffff  128M online       yes      82
 0x00000002a0000000-0x00000002a7ffffff  128M online       yes      84
 0x00000002b0000000-0x00000002b7ffffff  128M online       yes      86
 0x00000002c0000000-0x00000002c7ffffff  128M online       yes      88
 0x00000002d0000000-0x00000002d7ffffff  128M online       yes      90
 0x00000002e0000000-0x00000002e7ffffff  128M online       yes      92
 0x00000002f0000000-0x00000002f7ffffff  128M online       yes      94
 0x0000000300000000-0x0000000307ffffff  128M online       yes      96
 0x0000000310000000-0x0000000317ffffff  128M online       yes      98
 0x0000000320000000-0x0000000327ffffff  128M online       yes     100
 0x0000000330000000-0x000000033fffffff  256M online       yes 102-103

 Memory block size:       128M
 Total online memory:     8.1G
 Total offline memory:      0B

With this patch set:

 [root@localhost ~]# lsmem
 RANGE                                 SIZE  STATE REMOVABLE BLOCK
 0x0000000000000000-0x00000000bfffffff   3G online       yes  0-23
 0x0000000100000000-0x000000013fffffff   1G online       yes 32-39

 Memory block size:       128M
 Total online memory:       4G
 Total offline memory:      0B

All memory can get unplugged, all memory block can get removed.  Of
course, no workload ran and the system was basically idle, but it
highlights the issue - the fairly deterministic chain of unmovable
allocations.  When a huge page for the 2MB memmap is needed, a
just-onlined 4MB page will be split.  The remaining 2MB page will be used
for the memmap of the next memory block.  So one memory block will hold
the memmap of the two following memory blocks.  Finally the pages of the
last-onlined memory block will get used for the next bigger allocations -
if any allocation is unmovable, all dependent memory blocks cannot get
unplugged and removed until that allocation is gone.

Note that with bigger memory blocks (e.g., 256MB), *all* memory
blocks are dependent and none can get unplugged again!

b) Experiment with memory intensive workload

I performed an experiment with an older version of this patch set (before
we used undo_isolate_page_range() in online_pages(): Hotplug 56GB to a VM
with an initial 4GB, onlining all memory to ZONE_NORMAL right from the
kernel when adding it.  I then run various memory intensive workloads that
consume most system memory for a total of 45 minutes.  Once finished, I
try to unplug as much memory as possible.

With this change, I am able to remove via virtio-mem (adding individual
128MB memory blocks) 413 out of 448 added memory blocks.  Via individual
(256MB) DIMMs 380 out of 448 added memory blocks.  (I don't have any
numbers without this patchset, but looking at the above example, it's at
most half of the 448 memory blocks for virtio-mem, and most probably none
for DIMMs).

Again, there are workloads that might behave very differently due to the
nature of ZONE_NORMAL.

This change also affects (besides memory onlining):
- Other users of undo_isolate_page_range(): Pages are always placed to the
  tail.
-- When memory offlining fails
-- When memory isolation fails after having isolated some pageblocks
-- When alloc_contig_range() either succeeds or fails
- Other users of __putback_isolated_page(): Pages are always placed to the
  tail.
-- Free page reporting
- Other users of __free_pages_core()
-- AFAIKs, any memory that is getting exposed to the buddy during boot.
   IIUC we will now usually allocate memory from lower addresses within
   a zone first (especially during boot).
- Other users of generic_online_page()
-- Hyper-V balloon

This patch (of 5):

Let's prepare for additional flags and avoid long parameter lists of
bools.  Follow-up patches will also make use of the flags in
__free_pages_ok().

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: https://lkml.kernel.org/r/20201005121534.15649-1-david@redhat.com
Link: https://lkml.kernel.org/r/20201005121534.15649-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:18 -07:00
David Hildenbrand
d882c0067d mm: pass migratetype into memmap_init_zone() and move_pfn_range_to_zone()
On the memory onlining path, we want to start with MIGRATE_ISOLATE, to
un-isolate the pages after memory onlining is complete.  Let's allow
passing in the migratetype.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Charan Teja Reddy <charante@codeaurora.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/20200819175957.28465-10-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:17 -07:00
David Hildenbrand
4eb29bd9d0 mm/page_alloc: drop stale pageblock comment in memmap_init_zone*()
Commit ac5d2539b2 ("mm: meminit: reduce number of times pageblocks are
set during struct page init") moved the actual zone range check, leaving
only the alignment check for pageblocks.

Let's drop the stale comment and make the pageblock check easier to read.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Charan Teja Reddy <charante@codeaurora.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200819175957.28465-9-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:17 -07:00
David Hildenbrand
3fa0c7c79d mm/page_isolation: simplify return value of start_isolate_page_range()
Callers no longer need the number of isolated pageblocks.  Let's simplify.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Charan Teja Reddy <charante@codeaurora.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200819175957.28465-7-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:17 -07:00
David Hildenbrand
257bea7158 mm/page_alloc: simplify __offline_isolated_pages()
offline_pages() is the only user.  __offline_isolated_pages() never gets
called with ranges that contain memory holes and we no longer care about
the return value.  Drop the return value handling and all pfn_valid()
checks.

Update the documentation.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Charan Teja Reddy <charante@codeaurora.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200819175957.28465-5-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:17 -07:00
Oscar Salvador
79f5f8fab4 mm,hwpoison: rework soft offline for in-use pages
This patch changes the way we set and handle in-use poisoned pages.  Until
now, poisoned pages were released to the buddy allocator, trusting that
the checks that take place at allocation time would act as a safe net and
would skip that page.

This has proved to be wrong, as we got some pfn walkers out there, like
compaction, that all they care is the page to be in a buddy freelist.

Although this might not be the only user, having poisoned pages in the
buddy allocator seems a bad idea as we should only have free pages that
are ready and meant to be used as such.

Before explaining the taken approach, let us break down the kind of pages
we can soft offline.

- Anonymous THP (after the split, they end up being 4K pages)
- Hugetlb
- Order-0 pages (that can be either migrated or invalited)

* Normal pages (order-0 and anon-THP)

  - If they are clean and unmapped page cache pages, we invalidate
    then by means of invalidate_inode_page().
  - If they are mapped/dirty, we do the isolate-and-migrate dance.

Either way, do not call put_page directly from those paths.  Instead, we
keep the page and send it to page_handle_poison to perform the right
handling.

page_handle_poison sets the HWPoison flag and does the last put_page.

Down the chain, we placed a check for HWPoison page in
free_pages_prepare, that just skips any poisoned page, so those pages
do not end up in any pcplist/freelist.

After that, we set the refcount on the page to 1 and we increment
the poisoned pages counter.

If we see that the check in free_pages_prepare creates trouble, we can
always do what we do for free pages:

  - wait until the page hits buddy's freelists
  - take it off, and flag it

The downside of the above approach is that we could race with an
allocation, so by the time we  want to take the page off the buddy, the
page has been already allocated so we cannot soft offline it.
But the user could always retry it.

* Hugetlb pages

  - We isolate-and-migrate them

After the migration has been successful, we call dissolve_free_huge_page,
and we set HWPoison on the page if we succeed.
Hugetlb has a slightly different handling though.

While for non-hugetlb pages we cared about closing the race with an
allocation, doing so for hugetlb pages requires quite some additional
and intrusive code (we would need to hook in free_huge_page and some other
places).
So I decided to not make the code overly complicated and just fail
normally if the page we allocated in the meantime.

We can always build on top of this.

As a bonus, because of the way we handle now in-use pages, we no longer
need the put-as-isolation-migratetype dance, that was guarding for poisoned
pages to end up in pcplists.

Signed-off-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Aristeu Rozanski <aris@ruivo.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200922135650.1634-10-osalvador@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:16 -07:00
Oscar Salvador
06be6ff3d2 mm,hwpoison: rework soft offline for free pages
When trying to soft-offline a free page, we need to first take it off the
buddy allocator.  Once we know is out of reach, we can safely flag it as
poisoned.

take_page_off_buddy will be used to take a page meant to be poisoned off
the buddy allocator.  take_page_off_buddy calls break_down_buddy_pages,
which splits a higher-order page in case our page belongs to one.

Once the page is under our control, we call page_handle_poison to set it
as poisoned and grab a refcount on it.

Signed-off-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Aristeu Rozanski <aris@ruivo.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200922135650.1634-9-osalvador@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:16 -07:00
Matthew Wilcox (Oracle)
8fb156c9ee mm/page_owner: change split_page_owner to take a count
The implementation of split_page_owner() prefers a count rather than the
old order of the page.  When we support a variable size THP, we won't
have the order at this point, but we will have the number of pages.
So change the interface to what the caller and callee would prefer.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Link: https://lkml.kernel.org/r/20200908195539.25896-4-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:15 -07:00