[ Upstream commit cf77bf6988 ]
The lkdtm selftest config fragment enables CONFIG_UBSAN_TRAP to make the
ARRAY_BOUNDS test kill the calling process when an out-of-bound access
is detected by UBSAN. However, after this [1] commit, UBSAN is triggered
under many new scenarios that weren't detected before, such as in struct
definitions with fixed-size trailing arrays used as flexible arrays. As
a result, CONFIG_UBSAN_TRAP=y has become a very aggressive option to
enable except for specific situations.
`make kselftest-merge` applies CONFIG_UBSAN_TRAP=y to the kernel config
for all selftests, which makes many of them fail because of system hangs
during boot.
This change removes the config option from the lkdtm kselftest and
configures the ARRAY_BOUNDS test to look for UBSAN reports rather than
relying on the calling process being killed.
[1] commit 2d47c6956a ("ubsan: Tighten UBSAN_BOUNDS on GCC")'
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230802063252.1917997-1-ricardo.canuelo@collabora.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9168ea02b8 upstream.
The second input parameter of 'wait_rm_addr/sf $1 1' is misused. If it's
1, wait_rm_addr/sf will never break, and will loop ten times, then
'wait_rm_addr/sf' equals to 'sleep 1'. This delay time is too long,
which can sometimes make the tests fail.
A better way to use wait_rm_addr/sf is to use rm_addr/sf_count to obtain
the current value, and then pass into wait_rm_addr/sf.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-2-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4a75e9d11 upstream.
Some userspace pm tests failed are reported by CI:
112 userspace pm add & remove address
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
mptcp_info subflows=1:1 [ ok ]
subflows_total 2:2 [ ok ]
mptcp_info add_addr_signal=1:1 [ ok ]
rm [ ok ]
rmsf [ ok ]
Info: invert
mptcp_info subflows=0:0 [ ok ]
subflows_total 1:1 [fail]
got subflows 0:0 expected 1:1
Server ns stats
TcpPassiveOpens 2 0.0
TcpInSegs 118 0.0
This patch fixes them by changing 'speed' to 5 to run the tests much more
slowly.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-1-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63e201916b ]
In the PMTU test, when all previous tests are skipped and the new test
passes, the exit code is set to 0. However, the current check mistakenly
treats this as an assignment, causing the check to pass every time.
Consequently, regardless of how many tests have failed, if the latest test
passes, the PMTU test will report a pass.
Fixes: 2a9d3716b8 ("selftests: pmtu.sh: improve the test result processing")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6feb1a9641 ]
This file was renamed from .txt to .rst and left a dangling reference.
Fix it.
Fixes: 151f4e2bdc ("docs: power: convert docs to ReST and rename to *.rst")
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f29a824b0b ]
It is all too easy to get confused about @dev usage in the CXL driver
stack. Before adding a new cxl_pci_probe() setup operation that has a
devm lifetime dependent on @cxlds->dev binding, but also references
@cxlmd->dev, and prints messages, rework the devm_cxl_add_memdev() and
cxl_memdev_setup_fw_upload() function signatures to make this
distinction explicit. I.e. pass in the devm context as an @host argument
rather than infer it from other objects.
This is in preparation for adding a devm_cxl_sanitize_setup_notifier().
Note the whitespace fixup near the change of the devm_cxl_add_memdev()
signature. That uncaught typo originated in the patch that added
cxl_memdev_security_init().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da19714 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 696444a544 ]
Variable found is not being initialized, in the case where the desired
mount is not found the variable contains garbage. Fix this by initializing
it to zero.
Link: https://lore.kernel.org/all/20230727150117.627730-1-colin.i.king@gmail.com/
Fixes: a957cbc025 ("rtla: Add -C cgroup support")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3779416eed ]
Broadwell-de has a consumer core and server uncore. The uncore_arb PMU
isn't present and the broadwellx style cbox PMU should be used
instead. Fix the tma_info_system_dram_bw_use metric to use the server
metric rather than client.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/111
Fixes: 7d124303d6 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926031034.1201145-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1149037f6 ]
Caught using reference count checking on perf top with
"--call-graph=lbr". After this no memory leaks were detected.
Fixes: 57849998e2 ("perf report: Add processing for cycle histograms")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75265320d2 ]
Make the implicit REFCOUNT_CHECKING robust to when building with GCC.
Fixes: 9be6ab181b ("libperf rc_check: Enable implicitly with sanitizers")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab8ce15078 ]
Running perf top with address sanitizer and "--call-graph=lbr" fails
due to reading sample 0 when no samples exist. Add a guard to prevent
this.
Fixes: e2b23483eb ("perf machine: Factor out lbr_callchain_add_lbr_ip()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8b6e5b11 ]
The CPI_STALL_RATIO metric group can be used to present the high
level CPI stall breakdown metrics in powerpc, which will show:
- DISPATCH_STALL_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completion stall cycles per insn )
Commit cf26e043c2 ("perf vendor events power10: Add JSON
metric events to present CPI stall cycles in powerpc)" which added
the CPI_STALL_RATIO metric group, also modified
the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5,
to avoid multiplexing of events.
But that got revert in recent changes. Fix this issue by changing
back the PMC value used in PM_RUN_INST_CMPL to PMC5.
Result with the fix:
./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>
Performance counter stats for 'workload':
68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI
7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI
322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI
# 0.48 EXECUTION_STALL_CPI
16,858,553 PM_DISP_STALL_CYC
153,880,133 PM_EXEC_STALL
0.089774592 seconds time elapsed
"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.
Fixes: 7d473f475b ("perf vendor events: Move JSON/events to appropriate files for power10 platform")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: maddy@linux.ibm.com
Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f36b190ad ]
The recent change made it possible to generate vmlinux.h from BTF and
to ignore the file. But we also have a minimal vmlinux.h that will be
used by default. It should not be ignored by GIT.
Fixes: b7a2d774c9 ("perf build: Add ability to build with a generated vmlinux.h")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310110451.rvdUZJEY-lkp@intel.com/
Cc: oe-kbuild-all@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85f73c377b ]
pmu should be initialized to NULL before perf_pmus__scan loop. Fix and
shrink the scope of pmu at the same time. Issue detected by clang-tidy.
Fixes: 5752c20f37 ("perf mem: Scan all PMUs instead of just core ones")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20576fd7f ]
Raw events can be strings like 'r0xead' but the 0x is optional so they
can also be 'read'. On IcelakeX uncore_imc_free_running has an event
called 'read' which may be programmed as:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
```
However, the PE_RAW type isn't allowed on the right of a term, even
though in this case we just want to interpret it as a string. This
leads to the following error on IcelakeX:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Fix this by allowing raw types on the right of terms and treat them as
strings, just as is already done for PE_LEGACY_CACHE. Make this
consistent by just entirely removing name_or_legacy and always using
name_or_raw that covers all three cases.
Fixes: 6fd1e51915 ("perf parse-events: Support PMUs for legacy cache events")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230928004431.1926969-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1783ddfb6 ]
By default perf will fail the build if the development files for
libtraceevent are not available.
To build perf without libtraceevent support, disabling several features
such as 'perf trace', one needs to add NO_LIBTRACEVENT=1 to the make
command line.
Add the missing comments about that to the tools/perf/Makefile.perf
file, just like all the other such command line toggles.
Fixes: 378ef0f5d9 ("perf build: Use libtraceevent from the system")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZR6+MhXtLnv6ow6E@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3dff577d ]
The iio_generic_buffer can return garbage values when the total size of
scan data is not a multiple of the largest element in the scan. This can be
demonstrated by reading a scan, consisting, for example of one 4-byte and
one 2-byte element, where the 4-byte element is first in the buffer.
The IIO generic buffer code does not take into account the last two
padding bytes that are needed to ensure that the 4-byte data for next
scan is correctly aligned.
Add the padding bytes required to align the next sample with the scan size.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e58537ccce ("staging: iio: update example application.")
Link: https://lore.kernel.org/r/ZRvlm4ktNLu+qmlf@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7c9ae8d5d ]
The perf test named "kernel lock contention analysis test"
fails in powerpc system with below error:
[command]# ./perf test 81 -vv
81: kernel lock contention analysis test :
--- start ---
test child forked, pid 2140
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
[Skip] No BPF support
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
[Fail] Recorded result should have a lock from unix_stream:
test child finished with -1
---- end ----
kernel lock contention analysis test: FAILED!
The test is failing because we get an address entry with 0 in
perf lock samples for powerpc, and code for lock contention
option "--callstack-filter" will not check further entries after
address 0.
Below are some of the samples from test generated perf.data file, which
have 0 address in the 2nd entry of callstack:
--------
sched-messaging 3409 [001] 7152.904029: lock:contention_begin: 0xc00000c80904ef00 (flags=SPIN)
c0000000001e926c __traceiter_contention_begin+0x6c ([kernel.kallsyms])
0 [unknown] ([unknown])
c000000000f8a178 native_queued_spin_lock_slowpath+0x1f8 ([kernel.kallsyms])
c000000000f89f44 _raw_spin_lock_irqsave+0x84 ([kernel.kallsyms])
c0000000001d9fd0 prepare_to_wait+0x50 ([kernel.kallsyms])
c000000000c80f50 sock_alloc_send_pskb+0x1b0 ([kernel.kallsyms])
c000000000e82298 unix_stream_sendmsg+0x2b8 ([kernel.kallsyms])
c000000000c78980 sock_sendmsg+0x80 ([kernel.kallsyms])
sched-messaging 3408 [005] 7152.904036: lock:contention_begin: 0xc00000c80904ef00 (flags=SPIN)
c0000000001e926c __traceiter_contention_begin+0x6c ([kernel.kallsyms])
0 [unknown] ([unknown])
c000000000f8a178 native_queued_spin_lock_slowpath+0x1f8 ([kernel.kallsyms])
c000000000f89f44 _raw_spin_lock_irqsave+0x84 ([kernel.kallsyms])
c0000000001d9fd0 prepare_to_wait+0x50 ([kernel.kallsyms])
c000000000c80f50 sock_alloc_send_pskb+0x1b0 ([kernel.kallsyms])
c000000000e82298 unix_stream_sendmsg+0x2b8 ([kernel.kallsyms])
c000000000c78980 sock_sendmsg+0x80 ([kernel.kallsyms])
--------
Based on commit 20002ded4d ("perf_counter: powerpc: Add callchain support"),
incase of powerpc, the callchain saved by kernel always includes first
three entries as the NIP (next instruction pointer), LR (link register), and
the contents of LR save area in the second stack frame. In certain scenarios
its possible to have invalid kernel instruction addresses in either of LR or the
second stack frame's LR. In that case, kernel will store the address as zer0.
Hence, its possible to have 2nd or 3rd callstack entry as 0.
As per the current code in match_callstack_filter function, we skip the callstack
check incase we get 0 address. And hence the test case is failing in powerpc.
Fix this issue by updating the check in match_callstack_filter function,
to not skip callstack check if the 2nd or 3rd entry have 0 address
for powerpc.
Result in powerpc after patch changes:
[command]# ./perf test 81 -vv
81: kernel lock contention analysis test :
--- start ---
test child forked, pid 4570
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
[Skip] No BPF support
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
[Skip] Could not find 'tasklist_lock'
Testing perf lock contention --callstack-filter (w/ unix_stream)
Testing perf lock contention --callstack-filter with task aggregation
Testing perf lock contention CSV output
[Skip] No BPF support
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Fixes: ebab291641 ("perf lock contention: Support filters for different aggregation")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Link: https://lore.kernel.org/r/20231003092113.252380-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e501a65d3 ]
The BTF func proto for a tracepoint has one more argument than the
actual tracepoint function since it has a context argument at the
begining. So it should compare to 5 when the tracepoint has 4
arguments.
typedef void (*btf_trace_sched_switch)(void *, bool, struct task_struct *, struct task_struct *, unsigned int);
Also, recent change in the perf tool would use a hand-written minimal
vmlinux.h to generate BTF in the skeleton. So it won't have the info
of the tracepoint. Anyway it should use the kernel's vmlinux BTF to
check the type in the kernel.
Fixes: b36888f71c ("perf record: Handle argument change in sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Song Liu <song@kernel.org>
Cc: Hao Luo <haoluo@google.com>
CC: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230922234444.3115821-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ede72dca45 ]
Fuzzing found that an invalid tracepoint name would create a memory
leak with an address sanitizer build:
```
$ perf stat -e '*:o/' true
event syntax error: '*:o/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
=================================================================
==59380==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 4 byte(s) in 2 object(s) allocated from:
#0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x55f2f41be73b in str util/parse-events.l:49
#2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338
#3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464
#4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822
#5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094
#6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279
#7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251
#8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351
#9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539
#10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654
#11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501
#12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322
#13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375
#14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419
#15 0x55f2f409412b in main tools/perf/perf.c:535
SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s).
```
Fix by adding the missing destructor.
Fixes: 865582c3f4 ("perf tools: Adds the tracepoint name parsing support")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: He Kuang <hekuang@huawei.com>
Link: https://lore.kernel.org/r/20230914164028.363220-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c526579a4 ]
'perf kwork' processes data based on timestamps and needs to sort events.
Fixes: f98919ec4f ("perf kwork: Implement 'report' subcommand")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230812084917.169338-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d39710088d ]
1. Atoms are managed in page mode and should be released using atom_free()
instead of free().
2. When the event does not match, the atom needs to free.
Fixes: f98919ec4f ("perf kwork: Implement 'report' subcommand")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230812084917.169338-2-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a84fbf2056 ]
Generating metrics llc_code_read_mpi_demand_plus_prefetch,
llc_data_read_mpi_demand_plus_prefetch,
llc_miss_local_memory_bandwidth_read,
llc_miss_local_memory_bandwidth_write,
nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read,
memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw,
C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency,
C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency,
C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would
trigger an address sanitizer heap-buffer-overflows on a SkylakeX.
```
==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98
READ of size 4 at 0x5020003eee78 thread T0
#0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12
#1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6
#2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9
#3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31
#4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18
#5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3
#6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5
#7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2
#8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3
#9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11
#10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8
#11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2
#12 0x558265bb9389 in main tools/perf/perf.c:537:3
```
The issue was the use of testing a cpumap with NULL rather than using
empty, as a map containing the dummy value isn't NULL and the -1
results in an empty aggr map being allocated which legitimately
overflows when any member is accessed.
Fixes: 8a96f454f5 ("perf stat: Avoid SEGV if core.cpus isn't set")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a27e2e2d46 ]
I checked with the original author, the mmap_FIXED test case wasn't
properly tested and fails. Currently, it maps two consecutive (non
overlapping) pages and expects the second mapping to be denied by MDWE but
these two pages have nothing to do with each other so MDWE is actually out
of the picture here.
What the test actually intended to do was to remap a virtual address using
MAP_FIXED. However, this operation unmaps the existing mapping and
creates a new one so the va is backed by a new page and MDWE is again out
of the picture, all remappings should succeed.
This patch keeps the test case to make it clear that this situation is
expected to work: MDWE shouldn't block a MAP_FIXED replacement.
Link: https://lkml.kernel.org/r/20230828150858.393570-3-revest@chromium.org
Fixes: 4cf1fe34fd ("kselftest: vm: add tests for memory-deny-write-execute")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ayush Jain <ayush.jain3@amd.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b3c2348d3 ]
Some of the tests for unfused parts referenced a named member parameter,
but when the test suite was switched to call a python ctypes library they
weren't updated. Adjust them to refer to the first argument of the
process_param() call and set the data type of the signature appropriately.
Fixes: 15f8aa7bb3 ("crypto: ccp - Add unit tests for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ad01eb5fa ]
When parameters are sent the PSP returns back it's own signature
for the application to verify the authenticity of the result.
Display this signature to the caller instead of the one the caller
sent.
Fixes: f40d42f116 ("crypto: ccp - Add a sample python script for Dynamic Boost Control")
Fixes: febe3ed322 ("crypto: ccp - Add a sample library for ioctl use")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70f242c193 ]
The sample application was taking values from ioctl() and treating
those as the error codes to present to a user.
This is incorrect when ret is non-zero, the error is stored to `errno`.
Use this value instead.
Fixes: f40d42f116 ("crypto: ccp - Add a sample python script for Dynamic Boost Control")
Fixes: febe3ed322 ("crypto: ccp - Add a sample library for ioctl use")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f71c3e033 ]
A local environment change was importing ioctl_opt which is required
for ioctl tests to pass. Add the missing import for it.
Fixes: 15f8aa7bb3 ("crypto: ccp - Add unit tests for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a28c7665c ]
Benchmark command is copied into an array in the stack. The array is
BENCHMARK_ARGS items long but the command line could try to provide a
longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63
bytes of space after fitting the terminating \0 character) and user
could have inputted argument longer than that.
Return error in case the benchmark command does not fit to the space
allocated for it.
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d7f4e8158 ]
Compiling pidfd selftest after adding a __printf() attribute to
ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings
in error_report(), test_pidfd_poll_exec_thread(),
child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(),
child_poll_leader_exit_test().
The ksft_test_result_pass() in error_report() expects a string but
doesn't provide any argument after the format string. All the other
calls to ksft_print_msg() in the functions mentioned above have format
strings that don't match with other passed arguments.
Fix format specifiers so they match the passed variables.
Add a missing variable to ksft_test_result_pass() inside
error_report() so it matches other cases in the switch statement.
Fixes: 2def297ec7 ("pidfd: add tests for NSpid info in fdinfo")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da1055b673 ]
The linked list failure test 'pop_front_off' and 'pop_back_off'
currently rely on matching exact instruction and register values. The
purpose of the test is to ensure the offset is correctly incremented for
the returned pointers from list pop helpers, which can then be used with
container_of to obtain the real object. Hence, somehow obtaining the
information that the offset is 48 will work for us. Make the test more
robust by relying on verifier error string of bpf_spin_lock and remove
dependence on fragile instruction index or register number, which can be
affected by different clang versions used to build the selftests.
Fixes: 300f19dcdb ("selftests/bpf: Add BPF linked list API tests")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231020144839.2734006-1-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4eee56e14 ]
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: f72b948dcb ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b55b775f03 ]
Add missing sys_nanosleep name for RISC-V, which is used by some tests
(e.g. attach_probe).
Fixes: 08d0ce30e0 ("riscv: Implement syscall wrappers")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/bpf/20231004110905.49024-4-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f2692ee43 ]
SYS_PREFIX was missing for a RISC-V, which made a couple of kprobe
tests fail.
Add missing SYS_PREFIX for RISC-V.
Fixes: 08d0ce30e0 ("riscv: Implement syscall wrappers")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/bpf/20231004110905.49024-3-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 971f7c3214 ]
This test relies on bpf_testmod, so skip it if the module is not available.
Fixes: aa3d65de4b ("bpf/selftests: Test fentry attachment to shadowed functions")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230914124928.340701-1-asavkov@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2906063341 ]
Zero out the buffer for readlink() since readlink() does not append a
terminating null byte to the buffer. Also change the buffer length
passed to readlink() to 'PATH_MAX - 1' to ensure the resulting string
is always null terminated.
Fixes: 833c12ce0f ("selftests/x86/lam: Add inherit test cases for linear-address masking")
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20231016062446.695-1-binbin.wu@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e959c279d3 ]
If objtool runs into a problem that causes it to exit early, the overall
tool still returns a status code of 0, which causes the build to
continue as if nothing went wrong.
Note this only affects early errors, as later errors are still ignored
by check().
Fixes: b51277eb97 ("objtool: Ditch subcommands")
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/cb6a28832d24b2ebfafd26da9abb95f874c83045.1696355111.git.aplattner@nvidia.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9cdeb58a9 ]
Dummy events are created with an attribute where the period and freq
are zero. evsel__config will then see the uninitialized values and
initialize them in evsel__default_freq_period. As fequency mode is
used by default the dummy event would be set to use frequency
mode. However, this has no effect on the dummy event but does cause
unnecessary timers/interrupts. Avoid this overhead by setting the
period to 1 for dummy events.
evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and
period=1. This isn't necessary after this change and so the setting is
removed.
From Stephane:
The dummy event is not counting anything. It is used to collect mmap
records and avoid a race condition during the synthesize mmap phase of
perf record. As such, it should not cause any overhead during active
profiling. Yet, it did. Because of a bug the dummy event was
programmed as a sampling event in frequency mode. Events in that mode
incur more kernel overheads because on timer tick, the kernel has to
look at the number of samples for each event and potentially adjust
the sampling period to achieve the desired frequency. The dummy event
was therefore adding a frequency event to task and ctx contexts we may
otherwise not have any, e.g.,
perf record -a -e cpu/event=0x3c,period=10000000/.
On each timer tick the perf_adjust_freq_unthr_context() is invoked and
if ctx->nr_freq is non-zero, then the kernel will loop over ALL the
events of the context looking for frequency mode ones. In doing, so it
locks the context, and enable/disable the PMU of each hw event. If all
the events of the context are in period mode, the kernel will have to
traverse the list for nothing incurring overhead. The overhead is
multiplied by a very large factor when this happens in a guest kernel.
There is no need for the dummy event to be in frequency mode, it does
not count anything and therefore should not cause extra overhead for
no reason.
Fixes: 5bae025023 ("perf evlist: Introduce perf_evlist__new_dummy constructor")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
or aren't considered necessary for earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZTfz/QAKCRDdBJ7gKXxA
joMyAP99hLaLYeJbjlf+4tLJzhlpbVoFra1ieun2D+ZgFE78xQD/T4T3PYrZhYqD
WdrxGT9fiKOykXM5pmQRH9Zr4EvJBA0=
=Obbk
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
This pull request contains the following fixes:
o tools/nolibc: i386: Fix a stack misalign bug on _start
o MAINTAINERS: nolibc: update tree location
o tools/nolibc: mark start_c as weak to avoid linker errors
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmUtvC8THHBhdWxtY2tA
a2VybmVsLm9yZwAKCRCevxLzctn7jMyED/9nsHjSYKUvzdn8kb8Xjr+OkUlx6DCl
ITRqAScxl/Q+TTAKTSL508b/fVB56+h0ZmqOHeV0+askVI9c3G2wmLYCJ06P1bpI
siy6pqBtcaDVvU38ielbAVYtAeSahj9Jro44gCwBD9OE2TPi4ehl7PMIsX1vG39a
hmlbOSw3GG6jFHc5HkTlrOiOy1UB7oIPFI7qfH0XsKJ35vvmDSWPpiHIGwZyx3iv
hInVPV4kEBREAXONjru7Ginn9dnxZXFqOwQeqW3ZfYudDUHeKzLMrtYsE6pqZxRP
UEyFiI6bhr2fDPoXHGYSm63OrYAm3uZ0jsgC72ZjrLH2ISY0oCuGGf6HP5SjkRfP
jPcqMD5h3K+aEHLN3XZV0v3FwelE3qjHVcDQhpu+nJCNDlWK3DNMOjwadynqDOHJ
5FIbusDk5h4rCgOh607zuRPBv0EmtLw3oXGzBzLl8bqRaj58iZP1Te+tnGZEYVMj
YydEqXPlKWNaSeBL82gyCpWneYT+vdMjJdbl9b/EKXQxogYLFx4yC4z3h+7K7G56
InDXbxBu0BIMYMgJTWn7nsBgdjenho4PUrper3v6VMr6TKuXuEzmhpqgovaHLM1g
ITmdl/+ExPBUBI8u2s1qqLIdEFe5SXkOhFpYnC1E7RsS+GRCho9XCmtfcaPWfiU5
KcFVXKBlIJ4cNQ==
=PDcP
-----END PGP SIGNATURE-----
Merge tag 'urgent/nolibc.2023.10.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
- tools/nolibc: i386: Fix a stack misalign bug on _start
- MAINTAINERS: nolibc: update tree location
- tools/nolibc: mark start_c as weak to avoid linker errors
* tag 'urgent/nolibc.2023.10.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: mark start_c as weak
MAINTAINERS: nolibc: update tree location
tools/nolibc: i386: Fix a stack misalign bug on _start
a collection of small fixes that look like worth having in
this release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmUv/JMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpO/kH/j/uunE6oOE/BhtfO1USciebjRhLJ7lvoAvS
OD4/bcA45GRGLGIZaJtkcCIOOb9djUWLsS3QqA2UUFX+NN2/teEX6lsnv1tJTjdC
a2DkDS6AVYwp+rpzxSE5PUn/ImpiDt0/+R0ZbN56R3rHTOl7nFeXvutMbzxNXZvL
eWLcSDmRg7nmAdF+YbZ5omdgSL11Wi+dBFEJ0unEsecyu8pO7WcAGYvU6x/x04XJ
uLrjsaAGKr3rtoLLZ1DtnSmoED/b/lwDwzVR5REsg4kf2aiHxj1+kKGNXfrtqMl5
2OVxZEorcLufHM212LW4KT3Ncw4KE4xJzjt2mzEwO/ztgtomnBM=
=Rhxy
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A collection of small fixes that look like worth having in this
release"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: fix the common cfg map size
virtio-crypto: handle config changed by work queue
vhost: Allow null msg.size on VHOST_IOTLB_INVALIDATE
vdpa/mlx5: Fix firmware error on creation of 1k VQs
virtio_balloon: Fix endless deflation and inflation on arm64
vdpa/mlx5: Fix double release of debugfs entry
virtio-mmio: fix memory leak of vm_dev
vdpa_sim_blk: Fix the potential leak of mgmt_dev
tools/virtio: Add dma sync api for virtio test
- kprobe-events: Fix kprobe events to reject if the attached symbol
is not unique name because it may not the function which the user
want to attach to. (User can attach a probe to such symbol using
the nearest unique symbol + offset.)
- selftest: Add a testcase to ensure the kprobe event rejects non
unique symbol correctly.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmUzdQobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bMNAH/inFWv8e+rMm8F5Po6ZI
CmBxuZbxy2l+KfYDjXqSHu7TLKngVd6Bhdb5H2K7fgdwiZxrS0i6qvdppo+Cxgop
Yod06peDTM80IKavioCcOJOwLPGXXpZkMlK5fdC48HN6vrf9km4vws5ZAagfc1ng
YhnYm1HHeXcIYwtLkE2dCr6HkwkaOebWTLdZ8c70d1OPw0L9rzxH+edjhKCq8uIw
6WUg9ERxJYPUuCkQxOxVJrTdzNMRXsgf28FHc0LyYRm8kDpECT2BP6e/Y+TBbsX5
2pN5cUY5qfI6t3Pc1HDs2KX8ui2QCmj0mCvT0VixhdjThdHpRf0VjIFFAANf3LNO
XVA=
=O1Aa
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- kprobe-events: Fix kprobe events to reject if the attached symbol is
not unique name because it may not the function which the user want
to attach to. (User can attach a probe to such symbol using the
nearest unique symbol + offset.)
- selftest: Add a testcase to ensure the kprobe event rejects non
unique symbol correctly.
* tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Add new test case which checks non unique symbol
tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols
- Fix regression in reading scale and unit files from sysfs for PMU
events, so that we can use that info to pretty print instead of
printing raw numbers:
# perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2
Performance counter stats for 'system wide':
1.64 Joules power/energy-ram/
0.20 Joules power/energy-gpu/
2.001228914 seconds time elapsed
#
# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
#
- The small llvm.cpp file used to check if the llvm devel files are present was
incorrectly deleted when removing the BPF event in 'perf trace', put it back
as it is also used by tools/bpf/bpftool, that uses llvm routines to do
disassembly of BPF object files.
- Fix use of addr_location__exit() in dlfilter__object_code(), making sure that
it is only used to pair a previous addr_location__init() call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZTKh5AAKCRCyPKLppCJ+
J/g/AP0f6SNyHJz21JzDTzyjXAeSdMzKwic0LXv+kATQy31HJAD+Kf7UKQieUeZB
fxvp60aKyFN8IVIgpYiAjZMS3k9XPAY=
=N7Gv
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix regression in reading scale and unit files from sysfs for PMU
events, so that we can use that info to pretty print instead of
printing raw numbers:
# perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2
Performance counter stats for 'system wide':
1.64 Joules power/energy-ram/
0.20 Joules power/energy-gpu/
2.001228914 seconds time elapsed
#
# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
#
- The small llvm.cpp file used to check if the llvm devel files are
present was incorrectly deleted when removing the BPF event in 'perf
trace', put it back as it is also used by tools/bpf/bpftool, that
uses llvm routines to do disassembly of BPF object files.
- Fix use of addr_location__exit() in dlfilter__object_code(), making
sure that it is only used to pair a previous addr_location__init()
call.
* tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools build: Fix llvm feature detection, still used by bpftool
perf dlfilter: Add a test for object_code()
perf dlfilter: Fix use of addr_location__exit() in dlfilter__object_code()
perf pmu: Fix perf stat output with correct scale and unit
This Kselftest update for Linux 6.6-rc7 consists of one single fix
to assert check in user_events abi_test to properly check bit value
on Big Endian architectures. The current code treats the bit values
as Little Endian and the check fails on Big Endian.
-----BEGIN PGP SIGNATURE-----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=PJhV
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"One single fix to assert check in user_events abi_test to properly
check bit value on Big Endian architectures. The code treated the bit
values as Little Endian and the check failed on Big Endian"
* tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/user_events: Fix abi_test for BE archs
If name_show() is non unique, this test will try to install a kprobe on this
function which should fail returning EADDRNOTAVAIL.
On kernel where name_show() is not unique, this test is skipped.
Link: https://lore.kernel.org/all/20231020104250.9537-3-flaniel@linux.microsoft.com/
Cc: stable@vger.kernel.org
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When removing the BPF event for perf a feature test that checks if the
llvm devel files are availabe was removed but that is also used by
bpftool.
bpftool uses it to decide what kind of disassembly it will use: llvm or
binutils based.
Removing the tools/build/feature/test-llvm.cpp file made bpftool to
always fallback to binutils disassembly, even with the llvm devel files
installed, fix it by restoring just that small test-llvm.cpp test file.
Fixes: 56b11a2126 ("perf bpf: Remove support for embedding clang for compiling BPF events (-e foo.c)")
Reported-by: Manu Bretelle <chantr4@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Manu Bretelle <chantr4@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/lkml/ZTGa0Ukt7QyxWcVy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as fairly
clear-cut user reported regressions. The mlx5 DMA bug was causing strife
for 390x folks. The fixes themselves are not particularly scary, tho.
No open investigations / outstanding reports at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations,
make devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve,
previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset",
needs more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting,
it was denied to plug a constant source of bugs but turns out
.NET depends on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560",
it's causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains
a single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding
(bless Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z1F6
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow"
* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...
Recently, we noticed that some RST were wrongly generated when removing
the initial subflow.
This patch makes sure RST are not sent when removing any subflows or any
addresses.
Fixes: c2b2ae3925 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit mentioned below was more tolerant with the number of RST seen
during a test because in some uncontrollable situations, multiple RST
can be generated.
But it was not taking into account the case where no RST are expected:
this validation was then no longer reporting issues for the 0 RST case
because it is not possible to have less than 0 RST in the counter. This
patch fixes the issue by adding a specific condition.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftest for fixes around naming netdevs and namespaces.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 7d5cb68af6 (perf/benchmark: add a new benchmark for
seccom_unotify) added a reference to __NR_seccomp into perf. This is
fine as it added also a definition of __NR_seccomp for 64-bit. But it
failed to do so for 32-bit as instead of ifndef, ifdef was used.
Fix this typo (so fix the build of perf on 32-bit).
Fixes: 7d5cb68af6 (perf/benchmark: add a new benchmark for seccom_unotify)
Cc: Andrei Vagin <avagin@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231017083019.31733-1-jirislaby@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Users complained about OOM errors during fork without triggering
compaction. This can be fixed by modifying the flags used in
mas_expected_entries() so that the compaction will be triggered in low
memory situations. Since mas_expected_entries() is only used during fork,
the extra argument does not need to be passed through.
Additionally, the two test_maple_tree test cases and one benchmark test
were altered to use the correct locking type so that allocations would not
trigger sleeping and thus fail. Testing was completed with lockdep atomic
sleep detection.
The additional locking change requires rwsem support additions to the
tools/ directory through the use of pthreads pthread_rwlock_t. With this
change test_maple_tree works in userspace, as a module, and in-kernel.
Users may notice that the system gave up early on attempting to start new
processes instead of attempting to reclaim memory.
Link: https://lkml.kernel.org/r/20230915093243epcms1p46fa00bbac1ab7b7dca94acb66c44c456@epcms1p4
Link: https://lkml.kernel.org/r/20231012155233.2272446-1-Liam.Howlett@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <jason.sim@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Definition for MREMAP_DONTUNMAP is not present in glibc older than 2.32
thus throwing an undeclared error when running make on mm. Including
linux/mman.h solves the build error for people having older glibc.
Link: https://lkml.kernel.org/r/20231012155257.891776-1-samasth.norway.ananda@oracle.com
Fixes: 0183d777c2 ("selftests: mm: remove duplicate unneeded defines")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linux-mm/CA+G9fYvV-71XqpCr_jhdDfEtN701fBdG3q+=bafaZiGwUXy_aA@mail.gmail.com/
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Don't mess with the host's firewall ruleset. Since audit logging is not
per-netns, add an initial delay of a second so other selftests' netns
cleanups have a chance to finish.
Fixes: e8dbde59ca ("selftests: netfilter: Test nf_tables audit logging")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.
To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>
The abi_test currently uses a long sized test value for enablement
checks. On LE this works fine, however, on BE this results in inaccurate
assert checks due to a bit being used and assuming it's value is the
same on both LE and BE.
Use int type for 32-bit values and long type for 64-bit values to ensure
appropriate behavior on both LE and BE.
Fixes: 60b1af8de8 ("tracing/user_events: Add ABI self-test")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Fix the handling of the phycal timer offset when FEAT_ECV
and CNTPOFF_EL2 are implemented.
- Restore the functionnality of Permission Indirection that
was broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build.
s390:
- One small fix for gisa to avoid stalls.
x86:
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
- Fix for loading XSAVE state from an old kernel into a new one.
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUtvXgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOE3gf/Q0Xvi/oU/+iDMuvfCbMZg/nhbrsa
WmE/zXLrCF0DknppAsWulkhLGL2ceL6X+f37f2vWpBdG9SVDG/vSAg+QQDwsXiKN
hTJoaybtMMPZM64emPZKeLMrq3A/U32qIMmWMJkoQRyz6dftUhGqZEuy1jw8oomJ
n9idRDCMkbo+bick4URt0FEuI3Tf6dPIlG7P5hObFTw+nenzzxTjoxWZ432Mgyod
yqveEke4hcQ+6K1zdAcDNZqT9ZhxeTxAO4yrBAYfnFoPLhUXKDUumkqAQPNOhKTo
YN+b29kHBm+HvYkHN785FQla/13wjE1aq5TUj5J7NEDv4uRXDefDq2OAeg==
=b9AY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are implemented
- Restore the functionnality of Permission Indirection that was
broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build
s390:
- One small fix for gisa to avoid stalls
x86:
- Truncate writes to PMU counters to the counter's width to avoid
spurious overflows when emulating counter events in software
- Set the LVTPC entry mask bit when handling a PMI (to match
Intel-defined architectural behavior)
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
to kick the guest out of emulated halt
- Fix for loading XSAVE state from an old kernel into a new one
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert
statements
- Clean up stale test metadata
- Zero-initialize structures in memslot perf test to workaround a
suspected 'may be used uninitialized' false positives from GCC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
KVM: arm64: POR{E0}_EL1 do not need trap handlers
KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
KVM: MIPS: fix -Wunused-but-set-variable warning
KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
x86: KVM: SVM: add support for Invalid IPI Vector interception
x86: KVM: SVM: always update the x2avic msr interception
KVM: selftests: Force load all supported XSAVE state in state test
KVM: selftests: Load XSAVE state into untouched vCPU during state test
KVM: selftests: Touch relevant XSAVE state in guest for state test
KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
KVM: selftests: Zero-initialize entire test_result in memslot perf test
KVM: selftests: Remove obsolete and incorrect test case metadata
KVM: selftests: Treat %llx like %lx when formatting guest printf
KVM: x86/pmu: Synthesize at most one PMI per VM-exit
KVM: x86: Mask LVTPC when handling a PMI
KVM: x86/pmu: Truncate counter value to allowed width on write
...
Fixes: 8bd2f71054 ("virtio_ring: introduce dma sync api for virtqueue")
also add dma sync api for virtio test.
Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Message-Id: <20231008031734.1095-1-liming.wu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ct_tuple v4 data structure decode / encode routines were using
the v6 IP address decode and relying on default encode. This could
cause exceptions during encode / decode depending on how a ct4
tuple would appear in a netlink message.
Caught during code review.
Fixes: e52b07aa1a ("selftests: openvswitch: add flow dump support")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernels that don't have support for openvswitch drop reasons also
won't have the drop counter reasons, so we should skip the test
completely. It previously wasn't possible to build a test case
for this without polluting the datapath, so we introduce a mechanism
to clear all the flows from a datapath allowing us to test for
explicit drop actions, and then clear the flows to build the
original test case.
Fixes: 4242029164 ("selftests: openvswitch: add explicit drop testcase")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of fatal signal, or early abort at least cleanup the current
test case.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni reports that on some systems the pyroute2 version isn't
new enough to run the test suite. Ensure that we support a minimum
version of 0.6 for all cases (which does include the existing ones).
The 0.6.1 version was released in May of 2021, so should be
propagated to most installations at this point.
The alternative that Paolo proposed was to only skip when the
add-flow is being run. This would be okay for most cases, except
if a future test case is added that needs to do flow dump without
an associated add (just guessing). In that case, it could also be
broken and we would need additional skip logic anyway. Just draw
a line in the sand now.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/lkml/8470c431e0930d2ea204a9363a60937289b7fdbe.camel@redhat.com/
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
-----BEGIN PGP SIGNATURE-----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=LJ3q
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.6-fixes' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes for 6.6:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
Make sure that the command values used for replies are correct. This is
only affecting generated userspace helpers, no change on kernel code.
Fixes: 7199c86247 ("netlink: specs: devlink: add commands that do per-instance dump")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231012115811.298129-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tests rely on the IPv{4,6} FIB trace points being triggered once for
each forwarded packet. If receive processing is deferred to the
ksoftirqd task these invocations will not be counted and the tests will
fail. Fix by specifying the '-a' flag to avoid perf from filtering on
the mausezahn task.
Before:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.68) [FAIL]
# ./fib_tests.sh -t ipv6_mpath_list
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (.27) [FAIL]
After:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
# ./fib_tests.sh -t ipv6_mpath_list
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]
Fixes: 8ae9efb859 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test relies on the fib:fib_table_lookup trace point being triggered
once for each forwarded packet. If RP filter is not disabled, the trace
point will be triggered twice for each packet (for source validation and
forwarding), potentially masking actual bugs. Fix by explicitly
disabling RP filter.
Before:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.99) [ OK ]
After:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]
Fixes: 8ae9efb859 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* A handful of build fixes.
* A fix to avoid mixing up user/kernel-mode breakpoints, which can
manifest as a hang when mixing k/uprobes with other breakpoint
sources.
* A fix to avoid double-allocting crash kernel memory.
* A fix for tracefs syscall name mangling, which was causing syscalls
not to show up in tracefs.
* A fix to the perf driver to enable the hw events when selected, which
can trigger a BUG on some userspace access patterns.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmUpTGoTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiT3KEACCeF+jaVW7/jkc2nRr4gnxl4VAxmMC
p/UGwZbtBUtGPQAWFWZqcpDw6qkxGM96HK12+8CLgEjjOEZVAchFpix+G48mEgHn
LMA4MrPyJ5WxY7qbqD3V6d52UNpLwpJWU9oxlv7p417mkYzqfVs5Ey6r1Gh8E3pK
YRh6VEHBLxMw+qAb90MgzhzK39TZNkJ01U5kDedskpZ/qZCI+W5Jl0Rz88xcixUI
oO67a5lV5CmcGSxmeLKJXp1p0dV73c9wuMJMmCGyxMHX8UAHFRQqBrHvDpNUSPhD
BEne8Y1oSQAx8xsTe8HBksKSJeB3cqZ/EqqQkab2Q+RoQbfiE5daVbR5q7rNI+R9
EI9oakH59f5y2ohaiT3Kf+06nRBketKT1bnkIhQ9aEB6E7ilqS6iv+A2BEKCq3PP
GOHxDSSxal1+PcNObdx6RsHu82QSbUBp3LKcUV9bPrJqzXDRQrNlgf8B56IPp5yy
gj29xCu+vrTv2Y3uChCEdnJ0uXO/JUT02/FGMTSB12Ec43K3p2KCBhSzJyAD6kfa
WqfBJ1SWfBvL0vhsxuOuVS44/JKQUlDWt9H9Mo+SRR3K8yk83AALQ295RdE+AFBt
ZUBcv7FQH9yDmt/NsV8f0i1hHVSE35PwrMhIR2G4pddtoiC1L8CBxHl9g9R9IxQ9
jwt5vxqQx9izPg==
=kOgc
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of build fixes
- A fix to avoid mixing up user/kernel-mode breakpoints, which can
manifest as a hang when mixing k/uprobes with other breakpoint
sources
- A fix to avoid double-allocting crash kernel memory
- A fix for tracefs syscall name mangling, which was causing syscalls
not to show up in tracefs
- A fix to the perf driver to enable the hw events when selected, which
can trigger a BUG on some userspace access patterns
* tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers: perf: Fix panic in riscv SBI mmap support
riscv: Fix ftrace syscall handling which are now prefixed with __riscv_
RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK
riscv: kdump: fix crashkernel reserving problem on RISC-V
riscv: Remove duplicate objcopy flag
riscv: signal: fix sigaltstack frame size checking
riscv: errata: andes: Makefile: Fix randconfig build issue
riscv: Only consider swbp/ss handlers for correct privileged mode
riscv: kselftests: Fix mm build by removing testcases subdirectory
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=orAS
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.
We have a regression in TC currently under investigation, otherwise
the things that stand off most are probably the TCP and AF_PACKET
fixes, with both issues coming from 6.5.
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list"
* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
rswitch: Fix imbalance phy_power_off() calling
rswitch: Fix renesas_eth_sw_remove() implementation
octeontx2-pf: Fix page pool frag allocation warning
nfc: nci: assert requested protocol is valid
af_packet: Fix fortified memcpy() without flex array.
net: tcp: fix crashes trying to free half-baked MTU probes
net/smc: Fix pos miscalculation in statistics
nfp: flower: avoid rmmod nfp crash issues
net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
ethtool: Fix mod state of verbose no_mask bitset
net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
mctp: perform route lookups under a RCU read-side lock
net: skbuff: fix kernel-doc typos
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
net/smc: Fix dependency of SMC on ISM
ixgbe: fix crash with empty VF macvlan list
net/mlx5e: macsec: use update_pn flag instead of PN comparation
net: phy: mscc: macsec: reject PN update requests
...
The ABI mandates that the %esp register must be a multiple of 16 when
executing a 'call' instruction.
Commit 2ab446336b ("tools/nolibc: i386: shrink _start with _start_c")
simplified the _start function, but it didn't take care of the %esp
alignment, causing SIGSEGV on SSE and AVX programs that use aligned move
instruction (e.g., movdqa, movaps, and vmovdqa).
The 'and $-16, %esp' aligns the %esp at a multiple of 16. Then 'push
%eax' will subtract the %esp by 4; thus, it breaks the 16-byte
alignment. Make sure the %esp is correctly aligned after the push by
subtracting 12 before the push.
Extra:
Add 'add $12, %esp' before the 'and $-16, %esp' to avoid over-estimating
for particular cases as suggested by Willy.
A test program to validate the %esp alignment on _start can be found at:
https://lore.kernel.org/lkml/ZOoindMFj1UKqo+s@biznet-home.integral.gnuweeb.org
[ Thomas: trim Fixes tag commit id ]
Cc: Zhangjin Wu <falcon@tinylab.org>
Fixes: 2ab446336b ("tools/nolibc: i386: shrink _start with _start_c")
Reported-by: Nicholas Rosenberg <inori@vnlx.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Extend x86's state to forcefully load *all* host-supported xfeatures by
modifying xstate_bv in the saved state. Stuffing xstate_bv ensures that
the selftest is verifying KVM's full ABI regardless of whether or not the
guest code is successful in getting various xfeatures out of their INIT
state, e.g. see the disaster that is/was MPX.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand x86's state test to load XSAVE state into a "dummy" vCPU prior to
KVM_SET_CPUID2, and again with an empty guest CPUID model. Except for
off-by-default features, i.e. AMX, KVM's ABI for KVM_SET_XSAVE is that
userspace is allowed to load xfeatures so long as they are supported by
the host. This is a regression test for a combination of KVM bugs where
the state saved by KVM_GET_XSAVE{2} could not be loaded via KVM_SET_XSAVE
if the saved xstate_bv would load guest-unsupported xfeatures.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify support XSAVE state in the "state test's" guest code so that saving
and loading state via KVM_{G,S}ET_XSAVE actually does something useful,
i.e. so that xstate_bv in XSAVE state isn't empty.
Punt on BNDCSR for now, it's easier to just stuff that xfeature from the
host side.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmUk4fcTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhhqCACWsBYTB0EJ3oMJnzfnHeuN418ZDx/O
AL0k0O5MT6roEFmvGUhzJ/jsoxL+W+Wj3aFwzReyOSQpgjTTF/Ja26LPvxRzDxKi
sZPojnR2ykW31l7y+eh1p9qSM/aYvTMDP5zO7L1fBnWMAGMv8w8RezpCJ7bh4BgA
FTMZZrvKYVT9hCGkYqKUZGBtDTPZ56WE+MCiRxTWQvF+4QKaIff0tpno8V7203bE
D/b4+Ouh19RXFTC5dUq/0JtAdV2AadrPHnScUupc8Hk/MMFiU5CzvH4bAqiwXBcU
YqqlD3kZbIqqbKE93+03jvyrRDvDGlq+rpA3KMk5MBAfrkM4DytpWvMs
=SVq1
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering)
- fix hv_kvp_daemon to support keyfile based connection profile
(Shradha Gupta)
* tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv/hv_kvp_daemon:Support for keyfile based connection profile
hyperv: reduce size of ms_hyperv_info
x86/hyperv: Add common print prefix "Hyper-V" in hv_init
x86/hyperv: Remove hv_vtl_early_init initcall
x86/hyperv: Restrict get_vtl to only VTL platforms
Ifcfg config file support in NetworkManger is deprecated. This patch
provides support for the new keyfile config format for connection
profiles in NetworkManager. The patch modifies the hv_kvp_daemon code
to generate the new network configuration in keyfile
format(.ini-style format) along with a ifcfg format configuration.
The ifcfg format configuration is also retained to support easy
backward compatibility for distro vendors. These configurations are
stored in temp files which are further translated using the
hv_set_ifconfig.sh script. This script is implemented by individual
distros based on the network management commands supported.
For example, RHEL's implementation could be found here:
https://gitlab.com/redhat/centos-stream/src/hyperv-daemons/-/blob/c9s/hv_set_ifconfig.sh
Debian's implementation could be found here:
https://github.com/endlessm/linux/blob/master/debian/cloud-tools/hv_set_ifconfig
The next part of this support is to let the Distro vendors consume
these modified implementations to the new configuration format.
Tested-on: Rhel9(Hyper-V, Azure)(nm and ifcfg files verified)
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1696847920-31125-1-git-send-email-shradhagupta@linux.microsoft.com
A previous commit updated the verifier to print an accurate failure
message for when someone specifies a nonzero return value from an async
callback. This adds a testcase for validating that the verifier emits
the correct message in such a case.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231009161414.235829-2-void@manifault.com
Martin reported that on his local dev machine the test_tc_chain_mixed() fails as
"test_tc_chain_mixed:FAIL:seen_tc5 unexpected seen_tc5: actual 1 != expected 0"
and others occasionally, too.
However, when running in a more isolated setup (qemu in particular), it works fine
for him. The reason is that there is a small race-window where seen_tc* could turn
into true for various test cases when there is background traffic, e.g. after the
asserts they often get reset. In such case when subsequent detach takes place,
unrelated background traffic could have already flipped the bool to true beforehand.
Add a small helper tc_skel_reset_all_seen() to reset all bools before we do the ping
test. At this point, everything is set up as expected and therefore no race can occur.
All tc_{opts,links} tests continue to pass after this change.
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Simplify __assert_mprog_count() to remove the -ENOENT corner case as the
bpf_prog_query() now returns 0 when no bpf_mprog is attached. This also
allows to convert a few test cases from using raw __assert_mprog_count()
over to plain assert_mprog_count() helper.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a new test case which performs double query of the bpf_mprog through
libbpf API, but also via raw bpf(2) syscall. This is testing to gather
first the count and then in a subsequent probe the full information with
the program array without clearing passed structs in between.
# ./vmtest.sh -- ./test_progs -t tc_opts
[...]
./test_progs -t tc_opts
[ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz
[ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns
[ 1.402734] clocksource: Switched to clocksource tsc
[ 1.426639] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#252 tc_opts_after:OK
#253 tc_opts_append:OK
#254 tc_opts_basic:OK
#255 tc_opts_before:OK
#256 tc_opts_chain_classic:OK
#257 tc_opts_chain_mixed:OK
#258 tc_opts_delete_empty:OK
#259 tc_opts_demixed:OK
#260 tc_opts_detach:OK
#261 tc_opts_detach_after:OK
#262 tc_opts_detach_before:OK
#263 tc_opts_dev_cleanup:OK
#264 tc_opts_invalid:OK
#265 tc_opts_max:OK
#266 tc_opts_mixed:OK
#267 tc_opts_prepend:OK
#268 tc_opts_query:OK <--- (new test)
#269 tc_opts_replace:OK
#270 tc_opts_revision:OK
Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Zero-initialize the entire test_result structure used by memslot_perf_test
instead of zeroing only the fields used to guard the pr_info() calls.
gcc 13.2.0 is a bit overzealous and incorrectly thinks that rbestslottime's
slot_runtime may be used uninitialized.
In file included from memslot_perf_test.c:25:
memslot_perf_test.c: In function ‘main’:
include/test_util.h:31:22: error: ‘rbestslottime.slot_runtime.tv_nsec’ may be used uninitialized [-Werror=maybe-uninitialized]
31 | #define pr_info(...) printf(__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~
memslot_perf_test.c:1127:17: note: in expansion of macro ‘pr_info’
1127 | pr_info("Best slot setup time for the whole test area was %ld.%.9lds\n",
| ^~~~~~~
memslot_perf_test.c:1092:28: note: ‘rbestslottime.slot_runtime.tv_nsec’ was declared here
1092 | struct test_result rbestslottime;
| ^~~~~~~~~~~~~
include/test_util.h:31:22: error: ‘rbestslottime.slot_runtime.tv_sec’ may be used uninitialized [-Werror=maybe-uninitialized]
31 | #define pr_info(...) printf(__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~
memslot_perf_test.c:1127:17: note: in expansion of macro ‘pr_info’
1127 | pr_info("Best slot setup time for the whole test area was %ld.%.9lds\n",
| ^~~~~~~
memslot_perf_test.c:1092:28: note: ‘rbestslottime.slot_runtime.tv_sec’ was declared here
1092 | struct test_result rbestslottime;
| ^~~~~~~~~~~~~
That can't actually happen, at least not without the "result" structure in
test_loop() also being used uninitialized, which gcc doesn't complain
about, as writes to rbestslottime are all-or-nothing, i.e. slottimens can't
be non-zero without slot_runtime being written.
if (!data->mem_size &&
(!rbestslottime->slottimens ||
result.slottimens < rbestslottime->slottimens))
*rbestslottime = result;
Zero-initialize the structures to make gcc happy even though this is
likely a compiler bug. The cost to do so is negligible, both in terms of
code and runtime overhead. The only downside is that the compiler won't
warn about legitimate usage of "uninitialized" data, e.g. the test could
end up consuming zeros instead of useful data. However, given that the
test is quite mature and unlikely to see substantial changes, the odds of
introducing such bugs are relatively low, whereas being able to compile
KVM selftests with -Werror detects issues on a regular basis.
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231005002954.2887098-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
I didn't collect precise data but feels like we've got a lot
of 6.5 fixes here. WiFi fixes are most user-awaited.
Current release - regressions:
- Bluetooth: fix hci_link_tx_to RCU lock usage
Current release - new code bugs:
- bpf: mprog: fix maximum program check on mprog attachment
- eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns()
Previous releases - regressions:
- ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling
- vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(),
it doesn't handle zero length like we expected
- wifi:
- cfg80211: fix cqm_config access race, fix crashes with brcmfmac
- iwlwifi: mvm: handle PS changes in vif_cfg_changed
- mac80211: fix mesh id corruption on 32 bit systems
- mt76: mt76x02: fix MT76x0 external LNA gain handling
- Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER
- l2tp: fix handling of transhdrlen in __ip{,6}_append_data()
- dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent
- eth: stmmac: fix the incorrect parameter after refactoring
Previous releases - always broken:
- net: replace calls to sock->ops->connect() with kernel_connect(),
prevent address rewrite in kernel_bind(); otherwise BPF hooks may
modify arguments, unexpectedly to the caller
- tcp: fix delayed ACKs when reads and writes align with MSS
- bpf:
- verifier: unconditionally reset backtrack_state masks on global
func exit
- s390: let arch_prepare_bpf_trampoline return program size,
fix struct_ops offsets
- sockmap: fix accounting of available bytes in presence of PEEKs
- sockmap: reject sk_msg egress redirects to non-TCP sockets
- ipv4/fib: send netlink notify when delete source address routes
- ethtool: plca: fix width of reads when parsing netlink commands
- netfilter: nft_payload: rebuild vlan header on h_proto access
- Bluetooth: hci_codec: fix leaking memory of local_codecs
- eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids
- eth: stmmac:
- dwmac-stm32: fix resume on STM32 MCU
- remove buggy and unneeded stmmac_poll_controller, depend on NAPI
- ibmveth: always recompute TCP pseudo-header checksum, fix use
of the driver with Open vSwitch
- wifi:
- rtw88: rtw8723d: fix MAC address offset in EEPROM
- mt76: fix lock dependency problem for wed_lock
- mwifiex: sanity check data reported by the device
- iwlwifi: ensure ack flag is properly cleared
- iwlwifi: mvm: fix a memory corruption due to bad pointer arithm
- iwlwifi: mvm: fix incorrect usage of scan API
Misc:
- wifi: mac80211: work around Cisco AP 9115 VHT MPDU length
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JAtc
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, netfilter, BPF and WiFi.
I didn't collect precise data but feels like we've got a lot of 6.5
fixes here. WiFi fixes are most user-awaited.
Current release - regressions:
- Bluetooth: fix hci_link_tx_to RCU lock usage
Current release - new code bugs:
- bpf: mprog: fix maximum program check on mprog attachment
- eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns()
Previous releases - regressions:
- ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling
- vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it
doesn't handle zero length like we expected
- wifi:
- cfg80211: fix cqm_config access race, fix crashes with brcmfmac
- iwlwifi: mvm: handle PS changes in vif_cfg_changed
- mac80211: fix mesh id corruption on 32 bit systems
- mt76: mt76x02: fix MT76x0 external LNA gain handling
- Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER
- l2tp: fix handling of transhdrlen in __ip{,6}_append_data()
- dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent
- eth: stmmac: fix the incorrect parameter after refactoring
Previous releases - always broken:
- net: replace calls to sock->ops->connect() with kernel_connect(),
prevent address rewrite in kernel_bind(); otherwise BPF hooks may
modify arguments, unexpectedly to the caller
- tcp: fix delayed ACKs when reads and writes align with MSS
- bpf:
- verifier: unconditionally reset backtrack_state masks on global
func exit
- s390: let arch_prepare_bpf_trampoline return program size, fix
struct_ops offsets
- sockmap: fix accounting of available bytes in presence of PEEKs
- sockmap: reject sk_msg egress redirects to non-TCP sockets
- ipv4/fib: send netlink notify when delete source address routes
- ethtool: plca: fix width of reads when parsing netlink commands
- netfilter: nft_payload: rebuild vlan header on h_proto access
- Bluetooth: hci_codec: fix leaking memory of local_codecs
- eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids
- eth: stmmac:
- dwmac-stm32: fix resume on STM32 MCU
- remove buggy and unneeded stmmac_poll_controller, depend on NAPI
- ibmveth: always recompute TCP pseudo-header checksum, fix use of
the driver with Open vSwitch
- wifi:
- rtw88: rtw8723d: fix MAC address offset in EEPROM
- mt76: fix lock dependency problem for wed_lock
- mwifiex: sanity check data reported by the device
- iwlwifi: ensure ack flag is properly cleared
- iwlwifi: mvm: fix a memory corruption due to bad pointer arithm
- iwlwifi: mvm: fix incorrect usage of scan API
Misc:
- wifi: mac80211: work around Cisco AP 9115 VHT MPDU length"
* tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
MAINTAINERS: update Matthieu's email address
mptcp: userspace pm allow creating id 0 subflow
mptcp: fix delegated action races
net: stmmac: remove unneeded stmmac_poll_controller
net: lan743x: also select PHYLIB
net: ethernet: mediatek: disable irq before schedule napi
net: mana: Fix oversized sge0 for GSO packets
net: mana: Fix the tso_bytes calculation
net: mana: Fix TX CQE error handling
netlink: annotate data-races around sk->sk_err
sctp: update hb timer immediately after users change hb_interval
sctp: update transport state when processing a dupcook packet
tcp: fix delayed ACKs for MSS boundary condition
tcp: fix quick-ack counting to count actual ACKs of new data
page_pool: fix documentation typos
tipc: fix a potential deadlock on &tx->lock
net: stmmac: dwmac-stm32: fix resume on STM32 MCU
ipv4: Set offload_failed flag in fibmatch results
netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
netfilter: nf_tables: Deduplicate nft_register_obj audit logs
...
- Timerlat is reporting thread interference time without thread noise
events occurrence. It was caused because the thread interference variable
was not reset after the analysis of a timerlat activation that did not
hit the threshold.
- The IRQ handler delay is estimated from the delta of the IRQ latency
reported by timerlat, and the timestamp from IRQ handler start event.
If the delta is near-zero, the drift from the external clock and the
trace event and/or the overhead can cause the value to be negative.
If the value is negative, print a zero-delay.
- IRQ handlers happening after the timerlat thread event but before
the stop tracing were being reported as IRQ that happened before the
*current* IRQ occurrence. Ignore Previous IRQ noise in this condition
because they are valid only for the *next* timerlat activation.
Timerlat user-space:
- Timerlat is stopping all user-space thread if a CPU becomes
offline. Do not stop the entire tool if a CPU is/become offline,
but only the thread of the unavailable CPU. Stop the tool only,
if all threads leave because the CPUs become/are offline.
man-pages:
- Fix command line example in timerlat hist man page.
-----BEGIN PGP SIGNATURE-----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=1BAc
-----END PGP SIGNATURE-----
Merge tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux
Pull rtla fixes from Daniel Bristot de Oliveira:
"rtla (Real-Time Linux Analysis) tool fixes.
Timerlat auto-analysis:
- Timerlat is reporting thread interference time without thread noise
events occurrence. It was caused because the thread interference
variable was not reset after the analysis of a timerlat activation
that did not hit the threshold.
- The IRQ handler delay is estimated from the delta of the IRQ
latency reported by timerlat, and the timestamp from IRQ handler
start event. If the delta is near-zero, the drift from the external
clock and the trace event and/or the overhead can cause the value
to be negative. If the value is negative, print a zero-delay.
- IRQ handlers happening after the timerlat thread event but before
the stop tracing were being reported as IRQ that happened before
the *current* IRQ occurrence. Ignore Previous IRQ noise in this
condition because they are valid only for the *next* timerlat
activation.
Timerlat user-space:
- Timerlat is stopping all user-space thread if a CPU becomes
offline. Do not stop the entire tool if a CPU is/become offline,
but only the thread of the unavailable CPU. Stop the tool only, if
all threads leave because the CPUs become/are offline.
man-pages:
- Fix command line example in timerlat hist man page"
* tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux:
rtla: fix a example in rtla-timerlat-hist.rst
rtla/timerlat: Do not stop user-space if a cpu is offline
rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample
rtla/timerlat_aa: Fix negative IRQ delay
rtla/timerlat_aa: Zero thread sum after every sample analysis
-----BEGIN PGP SIGNATURE-----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=YLDi
-----END PGP SIGNATURE-----
Merge tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter patches for net
First patch resolves a regression with vlan header matching, this was
broken since 6.5 release. From myself.
Second patch fixes an ancient problem with sctp connection tracking in
case INIT_ACK packets are delayed. This comes with a selftest, both
patches from Xin Long.
Patch 4 extends the existing nftables audit selftest, from
Phil Sutter.
Patch 5, also from Phil, avoids a situation where nftables
would emit an audit record twice. This was broken since 5.13 days.
Patch 6, from myself, avoids spurious insertion failure if we encounter an
overlapping but expired range during element insertion with the
'nft_set_rbtree' backend. This problem exists since 6.2.
* tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
netfilter: nf_tables: Deduplicate nft_register_obj audit logs
selftests: netfilter: Extend nft_audit.sh
selftests: netfilter: test for sctp collision processing in nf_conntrack
netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp
netfilter: nft_payload: rebuild vlan header on h_proto access
====================
Link: https://lore.kernel.org/r/20231004141405.28749-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delete inaccurate descriptions and obsolete metadata for test cases.
It adds zero value, and has a non-zero chance of becoming stale and
misleading in the future. No functional changes intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230914094803.94661-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Treat %ll* formats the same as %l* formats when processing printfs from
the guest so that using e.g. %llx instead of %lx generates the expected
output. Ideally, unexpected formats would generate compile-time warnings
or errors, but it's not at all obvious how to actually accomplish that.
Alternatively, guest_vsnprintf() could assert on an unexpected format,
but since the vast majority of printfs are for failed guest asserts,
getting *something* printed is better than nothing.
E.g. before
==== Test Assertion Failure ====
x86_64/private_mem_conversions_test.c:265: mem[i] == 0
pid=4286 tid=4290 errno=4 - Interrupted system call
1 0x0000000000401c74: __test_mem_conversions at private_mem_conversions_test.c:336
2 0x00007f3aae6076da: ?? ??:0
3 0x00007f3aae32161e: ?? ??:0
Expected 0x0 at offset 0 (gpa 0x%lx), got 0x0
and after
==== Test Assertion Failure ====
x86_64/private_mem_conversions_test.c:265: mem[i] == 0
pid=5664 tid=5668 errno=4 - Interrupted system call
1 0x0000000000401c74: __test_mem_conversions at private_mem_conversions_test.c:336
2 0x00007fbe180076da: ?? ??:0
3 0x00007fbe17d2161e: ?? ??:0
Expected 0x0 at offset 0 (gpa 0x100000000), got 0xcc
Fixes: e511938249 ("KVM: selftests: Add guest_snprintf() to KVM selftests")
Cc: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230921171641.3641776-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This kselftest fixes update for Linux 6.6-rc5 consists of one single
fix to Makefile to fix the incorrect TARGET name for uevent test.
-----BEGIN PGP SIGNATURE-----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=W9Tx
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to Makefile to fix the incorrect TARGET name for uevent
test"
* tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix wrong TARGET in kselftest top level Makefile
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZRqk1wAKCRDbK58LschI
g8GRAQC4E0bw6BTFRl0b3MxvpZES6lU0BUtX2gKVK4tLZdXw/wEAmTlBXQqNzF3b
BkCQknVbFTSw/8l8pzUW123Fb46wUAQ=
=E3hd
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-02
We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).
The main changes are:
1) Fix BPF verifier to reset backtrack_state masks on global function
exit as otherwise subsequent precision tracking would reuse them,
from Andrii Nakryiko.
2) Several sockmap fixes for available bytes accounting,
from John Fastabend.
3) Reject sk_msg egress redirects to non-TCP sockets given this
is only supported for TCP sockets today, from Jakub Sitnicki.
4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
limits with BPF_F_BEFORE directive, from Daniel Borkmann
and Nikolay Aleksandrov.
5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
size_index for selecting a bpf_mem_cache, from Hou Tao.
6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
from Song Liu.
7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
from Leon Hwang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use kmalloc_size_roundup() to adjust size_index
selftest/bpf: Add various selftests for program limits
bpf, mprog: Fix maximum program check on mprog attachment
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
bpf, sockmap: Add tests for MSG_F_PEEK
bpf, sockmap: Do not inc copied_seq when PEEK flag set
bpf: tcp_read_skb needs to pop skb regardless of seq
bpf: unconditionally reset backtrack_state masks on global func exit
bpf: Fix tr dereferencing
selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================
Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding/updating an object, the transaction handler emits suitable
audit log entries already, the one in nft_obj_notify() is redundant. To
fix that (and retain the audit logging from objects' 'update' callback),
Introduce an "audit log free" variant for internal use.
Fixes: c520292f29 ("audit: log nftables configuration change events once per table")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>
Add tests for sets and elements and deletion of all kinds. Also
reorder rule reset tests: By moving the bulk rule add command up, the
two 'reset rules' tests become identical.
While at it, fix for a failing bulk rule add test's error status getting
lost due to its use in a pipe. Avoid this by using a temporary file.
Headings in diff output for failing tests contain no useful data, strip
them.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
This patch adds a test case to reproduce the SCTP DATA chunk retransmission
timeout issue caused by the improper SCTP collision processing in netfilter
nf_conntrack_proto_sctp.
In this test, client sends a INIT chunk, but the INIT_ACK replied from
server is delayed until the server sends a INIT chunk to start a new
connection from its side. After the connection is complete from server
side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp.
The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead
of updating the vtag with the out-of-date init_tag, otherwise, the vtag
in DATA chunks later sent by client don't match the vtag in the conntrack
entry and the DATA chunks get dropped.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
to issues which were introduced after 6.5.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZRmSDAAKCRDdBJ7gKXxA
jlSaAQCe3SnBdjRmuzbp5iIfNJOY7GXLN4NwMsArRUxRGY27IwD+KWhXZP/ydVnt
ZgS4x9rmarHuh5Pxds+6SRGhihRz/Ak=
=sf/5
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Fourteen hotfixes, eleven of which are cc:stable. The remainder
pertain to issues which were introduced after 6.5"
* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Crash: add lock to serialize crash hotplug handling
selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
mm, memcg: reconsider kmem.limit_in_bytes deprecation
mm: zswap: fix potential memory corruption on duplicate store
arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
mm: hugetlb: add huge page size param to set_huge_pte_at()
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
maple_tree: add mas_is_active() to detect in-tree walks
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
mm: abstract moving to the next PFN
mm: report success more often from filemap_map_folio_range()
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
- Fix arch_stack_walk_reliable(), used by live patching.
- Fix powerpc selftests to work with run_kselftest.sh
Thanks to: Joe Lawrence, Petr Mladek.
-----BEGIN PGP SIGNATURE-----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=gh/A
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix arch_stack_walk_reliable(), used by live patching
- Fix powerpc selftests to work with run_kselftest.sh
Thanks to Joe Lawrence and Petr Mladek.
* tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix emit_tests to work with run_kselftest.sh
powerpc/stacktrace: Fix arch_stack_walk_reliable()
According to the awk manual, the -e option does not need to be specified
in front of 'program' (unless you need to mix program-file).
The redundant -e option can cause error when users use awk tools other
than gawk (for example, mawk does not support the -e option).
Error Example:
awk: not an option: -e
Link: https://lkml.kernel.org/r/VI1P193MB075228810591AF2FDD7D42C599C3A@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test that we can read with MSG_F_PEEK and then still get correct number
of available bytes through FIONREAD. The recv() (without PEEK) then
returns the bytes as expected. The recv() always worked though because
it was just the available byte reporting that was broke before latest
fixes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-4-john.fastabend@gmail.com
The perf_pmu__parse_* functions for the sysfs files of pmu event’s
scale, unit, per-pkg and snapshot were updated in commit 7b723dbb96
("perf pmu: Be lazy about loading event info files from sysfs").
However, the paths for these sysfs files were incorrect. This resulted
in perf stat reporting values with wrong scaling and missing units. This
is fixed by correcting the paths for these sysfs files.
Before this fix:
$sudo perf stat -e power/energy-pkg/ -- sleep 2
Performance counter stats for 'system wide':
351,217,188,864 power/energy-pkg/
2.004127961 seconds time elapsed
After this fix:
$sudo perf stat -e power/energy-pkg/ -- sleep 2
Performance counter stats for 'system wide':
80.58 Joules power/energy-pkg/
2.004009749 seconds time elapsed
Fixes: 7b723dbb96 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ravi.bangoria@amd.com
Cc: sandipan.das@amd.com
Cc: james.clark@arm.com
Cc: kan.liang@linux.intel.com
Link: https://lore.kernel.org/r/20230920122349.418673-1-wyes.karny@amd.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The 'uevents' subdirectory does not exist in tools/testing/selftests/
and adding 'uevents' to the TARGETS list results in the following error:
make[1]: Entering directory 'xx/tools/testing/selftests/uevents'
make[1]: *** No targets specified and no makefile found. Stop.
make[1]: Leaving directory 'xx/tools/testing/selftests/uevents'
What actually exists in tools/testing/selftests/ is the 'uevent'
subdirectory.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This kselftest fixes update for Linux 6.6-rc4 consists of one
single fix to unmount tracefs when test created mount.
-----BEGIN PGP SIGNATURE-----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=5LK8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to unmount tracefs when test created mount"
* tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/user_events: Fix to unmount tracefs when test created mount
Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZRIFKAAKCRCMstVUGiXM
g/pXAP9HLB2s+beBTK5iQU4/NfqmAVSl303QCoR9xLByo38vfAEAlLiRIh061pTi
PRlXVuY9bUQPyCSYsiBHv/fmLqdQdwU=
=ti6G
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event"
* tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf jevent: fix core dump on software events on s390
perf pmu: Ensure all alias variables are initialized
perf jevents metric: Fix type of strcmp_cpuid_str
perf trace: Avoid compile error wrt redefining bool
perf bpf-prologue: Remove unused file
tools headers UAPI: Update tools's copy of drm.h headers
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf bench sched-seccomp-notify: Use the tools copy of seccomp.h UAPI
tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older systems
tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack syscalls with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
* Fix EL2 Stage-1 MMIO mappings where a random address was used
* Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
* Fix KVM_GET_REG_LIST API for ISA_EXT registers
* Fix reading ISA_EXT register of a missing extension
* Fix ISA_EXT register handling in get-reg-list test
* Fix filtering of AIA registers in get-reg-list test
x86:
* Fixes for TSC_AUX virtualization
* Stop zapping page tables asynchronously, since we don't
zap them as often as before
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUQU5YUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcdwf/X8eHQ5yfAE0J70xs4VZ1z7B8i77q
P54401z/q0FyQ4yyTHwbUv/FgVYscZ0efYogrkd3uuoPNtLmN2xKj1tM95A2ncP/
v318ljevZ0FWZ6J471Xu9MM3u15QmjC3Wai9z6IP4tz0S2rUhOYTJdFqlNf6gQSu
P8n9l2j3ZLAiUNizXa8M7350gCUFCBi37dvLLVTYOxbu17hZtmNjhNpz5G7YNc9y
zmJIJh30ZnMGUgMylLfcW0ZoqQFNIkNg3yyr9YjY68bTW5aspXdhp9u0zI+01xYF
sT+tOXBPPLi9MBuckX+oLMsvNXEZWxos2oMow3qziMo83neG+jU+WhjLHg==
=+sqe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
x86:
- Fixes for TSC_AUX virtualization
- Stop zapping page tables asynchronously, since we don't zap them as
often as before"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX
KVM: SVM: Fix TSC_AUX virtualization setup
KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
KVM: riscv: selftests: Selectively filter-out AIA registers
KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list
RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions
RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers
KVM: selftests: Assert that vasprintf() is successful
KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID
KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZQ8hRwAKCRDdBJ7gKXxA
jlK9AQDzT/FUQV3kIshsV1IwAKFcg7gtcFSN0vs+pV+e1+4tbQD/Z2OgfGFFsCSP
X6uc2cYHc9DG5/o44iFgadW8byMssQs=
=w+St
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
-----BEGIN PGP SIGNATURE-----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=ytFs
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-fixes-6.6-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.6, take #1
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
If no CPU list is passed, timerlat in user-space will dispatch
one thread per sysconf(_SC_NPROCESSORS_CONF). However, not all
CPU might be available, for instance, if HT is disabled.
Currently, rtla timerlat is stopping the session if an user-space
thread cannot set affinity to a CPU, or if a running user-space
thread is killed. However, this is too restrictive.
So, reduce the error to a debug message, and rtla timerlat run as
long as there is at least one user-space thread alive.
Link: https://lore.kernel.org/lkml/59cf2c882900ab7de91c6ee33b382ac7fa6b4ed0.1694781909.git.bristot@kernel.org
Fixes: cdca4f4e5e ("rtla/timerlat_top: Add timerlat user-space support")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
In order to use run_kselftest.sh the list of tests must be emitted to
populate kselftest-list.txt.
The powerpc Makefile is written to use EMIT_TESTS. But support for
EMIT_TESTS was dropped in commit d4e59a536f ("selftests: Use runner.sh
for emit targets"). Although prior to that commit a548de0fe8
("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had
already broken run_kselftest.sh for powerpc due to the executable check
using the wrong path.
It can be fixed by replacing the EMIT_TESTS definitions with actual
emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh
able to run powerpc tests:
$ cd linux
$ export ARCH=powerpc
$ export CROSS_COMPILE=powerpc64le-linux-gnu-
$ make headers
$ make -j -C tools/testing/selftests install
$ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt
182
Fixes: d4e59a536f ("selftests: Use runner.sh for emit targets")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=AoVg
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue"
* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...
Fix several compilation errors and warnings in memblock tests
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmUL2P0QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kSniB/9crPnn5y/AvzqA/AiRAvK9pbYj8t3lZyRC
PFvqHqg6OOQA2AN7VHcxaty6nMYMnr6Myk8lxmY45tpW6wp16XcFtoGYZAllBwTm
GoqyhRnREDHp7Z0FtKFGcdXm4AYSzEFIlQymoLFJ5S/fGDiBxBd53pacqS0JrL6X
TKKG1wLPiW9Vq/G90dL6N8qgA4vel9/UoE0aKEWHSEiGhhgcEh+foBoOs0F8DR9y
o/GZFVJfW5Jek6D7kWzMMq37dPS4TVJWN8df2Q2Ljy5f64i9sT/3rm+/dV6bmarB
1gjQtI+YoTeu+bZ1I9zJBWwTsMjyjhyZEk1zZxys89+qOnwaCTHF
=bA+b
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock test fixes from Mike Rapoport:
"Fix several compilation errors and warnings in memblock tests"
* tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix warning ‘struct seq_file’ declared inside parameter list
memblock tests: fix warning: "__ALIGN_KERNEL" redefined
memblock tests: Fix compilation errors.
A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks
-----BEGIN PGP SIGNATURE-----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=1MuW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks"
* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
ALSA: rawmidi: Fix NULL dereference at proc read
ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
ASoC: cs42l43: Add shared IRQ flag for shutters
ASoC: imx-audmix: Fix return error with devm_clk_get()
ASoC: hdaudio.c: Add missing check for devm_kstrdup
ALSA: riptide: Fix -Wformat-truncation warning for longname string
ALSA: cs4231: Fix -Wformat-truncation warning for longname string
ALSA: ad1848: Fix -Wformat-truncation warning for longname string
ALSA: hda: generic: Check potential mixer name string truncation
ALSA: cmipci: Fix -Wformat-truncation warning
ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
ALSA: firewire: Fix -Wformat-truncation warning for longname string
ALSA: xen: Fix -Wformat-truncation warning
ALSA: opti9x: Fix -Wformat-truncation warning
ALSA: es1688: Fix -Wformat-truncation warning
ALSA: cs4236: Fix -Wformat-truncation warning
...
Currently the AIA ONE_REG registers are reported by get-reg-list
as new registers for various vcpu_reg_list configs whenever Ssaia
is available on the host because Ssaia extension can only be
disabled by Smstateen extension which is not always available.
To tackle this, we should filter-out AIA ONE_REG registers only
when Ssaia can't be disabled for a VCPU.
Fixes: 477069398e ("KVM: riscv: selftests: Add get-reg-list test")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Same set of ISA_EXT registers are not present on all host because
ISA_EXT registers are visible to the KVM user space based on the
ISA extensions available on the host. Also, disabling an ISA
extension using corresponding ISA_EXT register does not affect
the visibility of the ISA_EXT register itself.
Based on the above, we should filter-out all ISA_EXT registers.
Fixes: 477069398e ("KVM: riscv: selftests: Add get-reg-list test")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Assert that vasprintf() succeeds as the "returned" string is undefined
on failure. Checking the result also eliminates the only warning with
default options in KVM selftests, i.e. is the only thing getting in the
way of compile with -Werror.
lib/test_util.c: In function ‘strdup_printf’:
lib/test_util.c:390:9: error: ignoring return value of ‘vasprintf’
declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
390 | vasprintf(&str, fmt, ap);
| ^~~~~~~~~~~~~~~~~~~~~~~~
Don't bother capturing the return value, allegedly vasprintf() can only
fail due to a memory allocation failure.
Fixes: dfaf20af76 ("KVM: arm64: selftests: Replace str_with_index with strdup_printf")
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Anup Patel <anup@brainfault.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20230914010636.1391735-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kselftests fails to build because the mm/testcases subdirectory is not
created and then the compiler fails to output the binary there.
So fix this by simply removing this subdirectory which is not very
useful.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20230915100113.13131-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
/proc/${pid}/smaps_rollup is not empty file even if process's address
space is empty, update the test.
Link: https://lkml.kernel.org/r/725e041f-e9df-4f3d-b267-d4cd2774a78d@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dynamically linking, Address Sanitizer requires its library to be the
first one to be loaded; this is apparently to ensure that every call to
malloc is intercepted. If using LD_PRELOAD, those listed libraries will
be loaded before the libraries listed in the program's ELF and will
therefore violate this requirement, leading to the below failure and
output from ASan.
commit 58e2847ad2 ("selftests: line buffer test program's stdout")
modified the kselftest runner to force line buffering by forcing the test
programs to run through `stdbuf`. It turns out that stdbuf implements
line buffering by injecting a library via LD_PRELOAD. Therefore selftests
that use ASan started failing.
Fix this by statically linking libasan in the affected test programs,
using the `-static-libasan` option. Note this is already the default for
Clang, but not got GCC.
Test output sample for failing case:
TAP version 13
1..3
# timeout set to 300
# selftests: openat2: openat2_test
# ==4052==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 1 selftests: openat2: openat2_test # exit=1
# timeout set to 300
# selftests: openat2: resolve_test
# ==4070==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 2 selftests: openat2: resolve_test # exit=1
Link: https://lkml.kernel.org/r/20230912135048.1755771-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes: 58e2847ad2 ("selftests: line buffer test program's stdout")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309121342.97e2f008-oliver.sang@intel.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test bpf_tcp_ca (in test_progs) checks multiple tcp_congestion_ops.
However, there isn't a test that verifies functions in the
tcp_congestion_ops is actually called. Add a check to verify that
bpf_cubic_acked is actually called during the test.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919060258.3237176-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix to unmount tracefs if the self-test mounted it to allow testing.
If tracefs was already mounted, this does nothing.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/
Fixes: a06023a8f7 ("selftests/user_events: Fix failures when user_events is not installed")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The testsuite already has simply tests for HSRv0. The testuite would
have been able to notice the v1 breakage if it was there at the time.
Extend the testsuite to also cover HSRv1.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code and group into functions so it will be easier to extend
the test to HSRv1 so that both versions are covered.
Move the ping/test part into do_complete_ping_test() and the interface
setup into setup_hsr_interfaces().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The timeout in the while loop is never subtracted due wrong usage of
`let' leading to an endless loop if the former condition never gets
true.
Put the statement for let in quotes so it is parsed as a single
statement.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Running commands such as
# ./perf stat -e cs -- true
Segmentation fault (core dumped)
# ./perf stat -e cpu-clock-- true
Segmentation fault (core dumped)
#
dump core. This should not happen as these events are defined
even when no hardware PMU is available.
Debugging this reveals this call chain:
perf_pmus__find_by_type(type=1)
+--> pmu_read_sysfs(core_only=false)
+--> perf_pmu__find2(dirfd=3, name=0x152a113 "software")
+--> perf_pmu__lookup(pmus=0x14f0568 <other_pmus>, dirfd=3,
lookup_name=0x152a113 "software")
+--> perf_pmu__find_events_table (pmu=0x1532130)
Now the pmu is "software" and it tries to find a proper table
generated by the pmu-event generation process for s390:
# cd pmu-events/
# ./jevents.py s390 all /root/linux/tools/perf/pmu-events/arch |\
grep -E '^const struct pmu_table_entry'
const struct pmu_table_entry pmu_events__cf_z10[] = {
const struct pmu_table_entry pmu_events__cf_z13[] = {
const struct pmu_table_entry pmu_metrics__cf_z13[] = {
const struct pmu_table_entry pmu_events__cf_z14[] = {
const struct pmu_table_entry pmu_metrics__cf_z14[] = {
const struct pmu_table_entry pmu_events__cf_z15[] = {
const struct pmu_table_entry pmu_metrics__cf_z15[] = {
const struct pmu_table_entry pmu_events__cf_z16[] = {
const struct pmu_table_entry pmu_metrics__cf_z16[] = {
const struct pmu_table_entry pmu_events__cf_z196[] = {
const struct pmu_table_entry pmu_events__cf_zec12[] = {
const struct pmu_table_entry pmu_metrics__cf_zec12[] = {
const struct pmu_table_entry pmu_events__test_soc_cpu[] = {
const struct pmu_table_entry pmu_metrics__test_soc_cpu[] = {
const struct pmu_table_entry pmu_events__test_soc_sys[] = {
#
However event "software" is not listed, as can be seen in the
generated const struct pmu_events_map pmu_events_map[].
So in function perf_pmu__find_events_table(), the variable
table is initialized to NULL, but never set to a proper
value. The function scans all generated &pmu_events_map[]
tables, but no table matches, because the tables are
s390 CPU Measurement unit specific:
i = 0;
for (;;) {
const struct pmu_events_map *map = &pmu_events_map[i++];
if (!map->arch)
break;
--> the maps are there because the build generated them
if (!strcmp_cpuid_str(map->cpuid, cpuid)) {
table = &map->event_table;
break;
}
--> Since no matching CPU string the table var remains 0x0
}
free(cpuid);
if (!pmu)
return table;
--> The pmu is "software" so it exists and no return
--> and here perf dies because table is 0x0
for (i = 0; i < table->num_pmus; i++) {
...
}
return NULL;
Fix this and do not access the table variable. Instead return 0x0
which is the same return code when the for-loop was not successful.
Output after:
# ./perf stat -e cs -- true
Performance counter stats for 'true':
0 cs
0.000853105 seconds time elapsed
0.000061000 seconds user
0.000827000 seconds sys
# ./perf stat -e cpu-clock -- true
Performance counter stats for 'true':
0.25 msec cpu-clock # 0.341 CPUs utilized
0.000728383 seconds time elapsed
0.000055000 seconds user
0.000706000 seconds sys
# ./perf stat -e cycles -- true
Performance counter stats for 'true':
<not supported> cycles
0.000767298 seconds time elapsed
0.000055000 seconds user
0.000739000 seconds sys
#
Fixes: 7c52f10c0d ("perf pmu: Cache JSON events table")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: dengler@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20230913125157.2790375-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6
#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2
#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9
#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32
#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6
#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8
#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8
#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9
#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8
#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15
#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9
#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8
#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5
#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9
#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11
#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8
#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2
#17 0x55fb0f941dab in main tools/perf/perf.c:535:3
```
Fixes: 7b723dbb96 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The parser wraps all strings as Events, so the input is an
Event. Using a string would be bad as functions like Simplify are
called on the arguments, which wouldn't be present on a string.
Fixes: 9d5da30e4a ("perf jevents: Add a new expression builtin strcmp_cpuid_str()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230914022204.1488383-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Make part of an existing TODO conditional to avoid the following build
error:
```
tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:14: error: cannot combine with previous 'char' declaration specifier
26 | typedef char bool;
| ^
include/stdbool.h:20:14: note: expanded from macro 'bool'
20 | #define bool _Bool
| ^
tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:1: error: typedef requires a name [-Werror,-Wmissing-declarations]
26 | typedef char bool;
| ^~~~~~~~~~~~~~~~~
2 errors generated.
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230913184957.230076-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This kselftest fixes update for Linux 6.6-rc2 consists of important
fixes to user_events test and ftrace test.
user_events test has been enabled for default run in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- adds checks for dependencies and skips the test. user_events test
requires root access, and tracefs and user_events enabled. It leaves
tracefs mounted and a fix is in progress for that missing piece.
- creates user_events test-specific Kconfig fragments.
ftrace test fixes:
- unmounts tracefs for recovering environment. Fix identified during the
above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage.
-----BEGIN PGP SIGNATURE-----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=HdKU
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more kselftest fixes from Shuah Khan
"Fixes to user_events test and ftrace test.
The user_events test was enabled by default in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- add checks for dependencies and skip the test if they aren't met.
The user_events test requires root access, and tracefs and
user_events enabled. It leaves tracefs mounted and a fix is in
progress for that missing piece.
- create user_events test-specific Kconfig fragments
ftrace test fixes:
- unmount tracefs for recovering environment. Fix identified during
the above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage"
* tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Fix to unmount tracefs for recovering environment
selftests: user_events: create test-specific Kconfig fragments
ftrace/selftests: Add softlink to latest log directory
selftests/user_events: Fix failures when user_events is not installed
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TgRd
-----END PGP SIGNATURE-----
Merge tag 'nf-23-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
netfilter pull request 23-09-13
====================
The following patchset contains Netfilter fixes for net:
1) Do not permit to remove rules from chain binding, otherwise
double rule release is possible, triggering UaF. This rule
deletion support does not make sense and userspace does not use
this. Problem exists since the introduction of chain binding support.
2) rbtree GC worker only collects the elements that have expired.
This operation is not destructive, therefore, turn write into
read spinlock to avoid datapath contention due to GC worker run.
This was not fixed in the recent GC fix batch in the 6.5 cycle.
3) pipapo set backend performs sync GC, therefore, catchall elements
must use sync GC queue variant. This bug was introduced in the
6.5 cycle with the recent GC fixes.
4) Stop GC run if memory allocation fails in pipapo set backend,
otherwise access to NULL pointer to GC transaction object might
occur. This bug was introduced in the 6.5 cycle with the recent
GC fixes.
5) rhash GC run uses an iterator that might hit EAGAIN to rewind,
triggering double-collection of the same element. This bug was
introduced in the 6.5 cycle with the recent GC fixes.
6) Do not permit to remove elements in anonymous sets, this type of
sets are populated once and then bound to rules. This fix is
similar to the chain binding patch coming first in this batch.
API permits since the very beginning but it has no use case from
userspace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
tls.sendmsg_large and tls.sendmsg_multiple are trying to send through
the self->cfd socket (only configured with TLS_RX) and to receive through
the self->fd socket (only configured with TLS_TX), so they're not using
kTLS at all. Swap the sockets.
Fixes: 7f657d5bf5 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vSvh
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(nf, ebpf, wifi, etc).
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in
bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()"
* tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
net: renesas: rswitch: Add spin lock protection for irq {un}mask
net: renesas: rswitch: Fix unmasking irq condition
igb: clean up in all error paths when enabling SR-IOV
ixgbe: fix timestamp configuration code
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
selftest: tcp: Fix address length in bind_wildcard.c.
tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.
tcp: Fix bind() regression for v4-mapped-v6 wildcard address.
tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).
ipv6: fix ip6_sock_set_addr_preferences() typo
veth: Update XDP feature set when bringing up device
net: macb: fix sleep inside spinlock
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988
net: ethernet: mtk_eth_soc: fix uninitialized variable
kcm: Fix memory leak in error path of kcm_sendmsg()
r8152: check budget for r8152_poll()
net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset
...
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from tests/common.h:9,
from tests/basic_api.h:5,
from main.c:2:
./linux/memblock.h:601:50: warning: ‘struct seq_file’ declared inside parameter list will not be visible outside of this definition or declaration
601 | static inline void memtest_report_meminfo(struct seq_file *m) { }
| ^~~~~~~~
Add declaration of 'struct seq_file' to tools/include/linux/seq_file.h
to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/linux/mm.h:14: warning: "__ALIGN_KERNEL" redefined
14 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
|
In file included from ../../include/linux/mm.h:6,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/uapi/linux/const.h:31: note: this is the location of the previous definition
31 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1)
|
Remove definitions of __ALIGN_KERNEL and __ALIGN_KERNEL_MASK from
tools/include/linux/mm.h to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
This patch fix the follow errors.
commit 61167ad5fe ("mm: pass nid to reserve_bootmem_region()") pass nid
parameter to reserve_bootmem_region(),
$ make -C tools/testing/memblock/
...
memblock.c: In function ‘memmap_init_reserved_pages’:
memblock.c:2111:25: error: too many arguments to function ‘reserve_bootmem_region’
2111 | reserve_bootmem_region(start, end, nid);
| ^~~~~~~~~~~~~~~~~~~~~~
../../include/linux/mm.h:32:6: note: declared here
32 | void reserve_bootmem_region(phys_addr_t start, phys_addr_t end);
| ^~~~~~~~~~~~~~~~~~~~~~
memblock.c:2122:17: error: too many arguments to function ‘reserve_bootmem_region’
2122 | reserve_bootmem_region(start, end, nid);
| ^~~~~~~~~~~~~~~~~~~~~~
commit dcdfdd40fa ("mm: Add support for unaccepted memory") call
accept_memory() in memblock.c
$ make -C tools/testing/memblock/
...
cc -fsanitize=address -fsanitize=undefined main.o memblock.o \
lib/slab.o mmzone.o slab.o tests/alloc_nid_api.o \
tests/alloc_helpers_api.o tests/alloc_api.o tests/basic_api.o \
tests/common.o tests/alloc_exact_nid_api.o -o main
/usr/bin/ld: memblock.o: in function `memblock_alloc_range_nid':
memblock.c:(.text+0x7ae4): undefined reference to `accept_memory'
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Fixes: dcdfdd40fa ("mm: Add support for unaccepted memory")
Fixes: 61167ad5fe ("mm: pass nid to reserve_bootmem_region()")
Link: https://lore.kernel.org/r/tencent_6F19BC082167F15DF2A8D8BEFE8EF220F60A@qq.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Compare NETFILTER_CFG type audit logs emitted from kernel upon ruleset
modifications against expected output.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We need to deny the attach_override test for arm64, denying the
whole kprobe_multi_test suite. Also making attach_override static.
Fixes: 7182e56411 ("selftests/bpf: Add kprobe_multi override test")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230913114711.499829-1-jolsa@kernel.org
- Add missing LOCKDOWN checks for eventfs callers
When LOCKDOWN is active for tracing, it causes inconsistent state
when some functions succeed and others fail.
- Use dput() to free the top level eventfs descriptor
There was a race between accesses and freeing it.
- Fix a long standing bug that eventfs exposed due to changing timings
by dynamically creating files. That is, If a event file is opened
for an instance, there's nothing preventing the instance from being
removed which will make accessing the files cause use-after-free bugs.
- Fix a ring buffer race that happens when iterating over the ring
buffer while writers are active. Check to make sure not to read
the event meta data if it's beyond the end of the ring buffer sub buffer.
- Fix the print trigger that disappeared because the test to create it
was looking for the event dir field being filled, but now it has the
"ef" field filled for the eventfs structure.
- Remove the unused "dir" field from the event structure.
- Fix the order of the trace_dynamic_info as it had it backwards for the
offset and len fields for which one was for which endianess.
- Fix NULL pointer dereference with eventfs_remove_rec()
If an allocation fails in one of the eventfs_add_*() functions,
the caller of it in event_subsystem_dir() or event_create_dir()
assigns the result to the structure. But it's assigning the ERR_PTR
and not NULL. This was passed to eventfs_remove_rec() which expects
either a good pointer or a NULL, not ERR_PTR. The fix is to not
assign the ERR_PTR to the structure, but to keep it NULL on error.
- Fix list_for_each_rcu() to use list_for_each_srcu() in
dcache_dir_open_wrapper(). One iteration of the code used RCU
but because it had to call sleepable code, it had to be changed
to use SRCU, but one of the iterations was missed.
- Fix synthetic event print function to use "as_u64" instead of
passing in a pointer to the union. To fix big/little endian issues,
the u64 that represented several types was turned into a union to
define the types properly.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZQCvoBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtgrAP9MiYiCMU+90oJ+61DFchbs3y7BNidP
s3lLRDUMJ935NQD/SSAm54PqWb+YXMpD7m9+3781l6xqwfabBMXNaEl+FwA=
=tlZu
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add missing LOCKDOWN checks for eventfs callers
When LOCKDOWN is active for tracing, it causes inconsistent state
when some functions succeed and others fail.
- Use dput() to free the top level eventfs descriptor
There was a race between accesses and freeing it.
- Fix a long standing bug that eventfs exposed due to changing timings
by dynamically creating files. That is, If a event file is opened for
an instance, there's nothing preventing the instance from being
removed which will make accessing the files cause use-after-free
bugs.
- Fix a ring buffer race that happens when iterating over the ring
buffer while writers are active. Check to make sure not to read the
event meta data if it's beyond the end of the ring buffer sub buffer.
- Fix the print trigger that disappeared because the test to create it
was looking for the event dir field being filled, but now it has the
"ef" field filled for the eventfs structure.
- Remove the unused "dir" field from the event structure.
- Fix the order of the trace_dynamic_info as it had it backwards for
the offset and len fields for which one was for which endianess.
- Fix NULL pointer dereference with eventfs_remove_rec()
If an allocation fails in one of the eventfs_add_*() functions, the
caller of it in event_subsystem_dir() or event_create_dir() assigns
the result to the structure. But it's assigning the ERR_PTR and not
NULL. This was passed to eventfs_remove_rec() which expects either a
good pointer or a NULL, not ERR_PTR. The fix is to not assign the
ERR_PTR to the structure, but to keep it NULL on error.
- Fix list_for_each_rcu() to use list_for_each_srcu() in
dcache_dir_open_wrapper(). One iteration of the code used RCU but
because it had to call sleepable code, it had to be changed to use
SRCU, but one of the iterations was missed.
- Fix synthetic event print function to use "as_u64" instead of passing
in a pointer to the union. To fix big/little endian issues, the u64
that represented several types was turned into a union to define the
types properly.
* tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Fix the NULL pointer dereference bug in eventfs_remove_rec()
tracefs/eventfs: Use list_for_each_srcu() in dcache_dir_open_wrapper()
tracing/synthetic: Print out u64 values properly
tracing/synthetic: Fix order of struct trace_dynamic_info
selftests/ftrace: Fix dependencies for some of the synthetic event tests
tracing: Remove unused trace_event_file dir field
tracing: Use the new eventfs descriptor for print trigger
ring-buffer: Do not attempt to read past "commit"
tracefs/eventfs: Free top level files on removal
ring-buffer: Avoid softlockup in ring_buffer_resize()
tracing: Have event inject files inc the trace array ref count
tracing: Have option files inc the trace array ref count
tracing: Have current_trace inc the trace array ref count
tracing: Have tracing_max_latency inc the trace array ref count
tracing: Increase trace array ref count on enable and filter files
tracefs/eventfs: Use dput to free the toplevel events directory
tracefs/eventfs: Add missing lockdown checks
tracefs: Add missing lockdown check to tracefs_create_dir()
Picking the changes from:
ad9ee11fdf ("drm/doc: document that PRIME import/export is always supported")
2ff4f6d410 ("drm/doc: document drm_event and its types")
9a2eabf48a ("drm/doc: use proper cross-references for sections")
c7a4722971 ("drm/syncobj: add IOCTL to register an eventfd")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2023-09-13 08:54:45.170134002 -0300
+++ after 2023-09-13 08:55:06.612712776 -0300
@@ -108,6 +108,7 @@
[0xCC] = "SYNCOBJ_TRANSFER",
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
[0xCE] = "MODE_GETFB2",
+ [0xCF] = "SYNCOBJ_EVENTFD",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Ser <contact@emersion.fr>
Link: https://lore.kernel.org/lkml/ZQGkh9qlhpKA%2FSMY@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from these csets:
1b5277c0ea ("x86/srso: Add SRSO_NO support")
8974eb5882 ("x86/speculation: Add Gather Data Sampling mitigation")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZQGismCqcDddjEIQ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To keep perf building in systems where types and defines used in this
new benchmark are not available, such as:
12 13.46 centos:stream : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-20) (GCC)
bench/sched-seccomp-notify.c: In function 'user_notif_syscall':
bench/sched-seccomp-notify.c:55:27: error: 'SECCOMP_RET_USER_NOTIF' undeclared (first use in this function); did you mean 'SECCOMP_RET_ERRNO'?
BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_USER_NOTIF),
^~~~~~~~~~~~~~~~~~~~~~
/git/perf-6.6.0-rc1/tools/include/uapi/linux/filter.h:49:59: note: in definition of macro 'BPF_STMT'
#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
^
bench/sched-seccomp-notify.c:55:27: note: each undeclared identifier is reported only once for each function it appears in
BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_USER_NOTIF),
^~~~~~~~~~~~~~~~~~~~~~
/git/perf-6.6.0-rc1/tools/include/uapi/linux/filter.h:49:59: note: in definition of macro 'BPF_STMT'
#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
^
bench/sched-seccomp-notify.c:55:3: error: missing initializer for field 'k' of 'struct sock_filter' [-Werror=missing-field-initializers]
BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_USER_NOTIF),
^~~~~~~~
In file included from bench/sched-seccomp-notify.c:5:
/git/perf-6.6.0-rc1/tools/include/uapi/linux/filter.h:28:8: note: 'k' declared here
__u32 k; /* Generic multiuse field */
^
bench/sched-seccomp-notify.c: In function 'user_notification_sync_loop':
bench/sched-seccomp-notify.c:70:28: error: storage size of 'resp' isn't known
struct seccomp_notif_resp resp;
^~~~
bench/sched-seccomp-notify.c:71:23: error: storage size of 'req' isn't known
struct seccomp_notif req;
^~~
bench/sched-seccomp-notify.c:76:23: error: 'SECCOMP_IOCTL_NOTIF_RECV' undeclared (first use in this function); did you mean 'SECCOMP_MODE_STRICT'?
if (ioctl(listener, SECCOMP_IOCTL_NOTIF_RECV, &req))
^~~~~~~~~~~~~~~~~~~~~~~~
SECCOMP_MODE_STRICT
bench/sched-seccomp-notify.c:86:23: error: 'SECCOMP_IOCTL_NOTIF_SEND' undeclared (first use in this function); did you mean 'SECCOMP_RET_ACTION'?
if (ioctl(listener, SECCOMP_IOCTL_NOTIF_SEND, &resp))
^~~~~~~~~~~~~~~~~~~~~~~~
SECCOMP_RET_ACTION
bench/sched-seccomp-notify.c:71:23: error: unused variable 'req' [-Werror=unused-variable]
struct seccomp_notif req;
^~~
bench/sched-seccomp-notify.c:70:28: error: unused variable 'resp' [-Werror=unused-variable]
struct seccomp_notif_resp resp;
^~~~
14 11.31 debian:10 : FAIL gcc version 8.3.0 (Debian 8.3.0-6)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZQGhjaojgOGtSNk6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new 'perf bench' for sched-seccomp-notify uses defines and types not
available in older systems where we want to have perf available, so grab
a copy of this UAPI from the kernel sources to allow that.
This will be checked in the future for drift from the original when we
build the perf tool, that will warn when that happens like:
make: Entering directory '/var/home/acme/git/perf-tools/tools/perf'
BUILD: Doing 'make -j32' parallel build
Warning: Kernel ABI header differences:
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZQGhMXtwX7RvV3ya@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We add these 8 test cases in bind_wildcard.c to check bind() conflicts.
1st bind() 2nd bind()
--------- ---------
0.0.0.0 ::FFFF:0.0.0.0
::FFFF:0.0.0.0 0.0.0.0
0.0.0.0 ::FFFF:127.0.0.1
::FFFF:127.0.0.1 0.0.0.0
127.0.0.1 ::FFFF:0.0.0.0
::FFFF:0.0.0.0 127.0.0.1
127.0.0.1 ::FFFF:127.0.0.1
::FFFF:127.0.0.1 127.0.0.1
All test passed without bhash2 and with bhash2 and this series.
Before bhash2:
$ uname -r
6.0.0-rc1-00393-g0bf73255d3a3
$ ./bind_wildcard
...
# PASSED: 16 / 16 tests passed.
Just after bhash2:
$ uname -r
6.0.0-rc1-00394-g28044fc1d495
$ ./bind_wildcard
...
ok 15 bind_wildcard.v4_local_v6_v4mapped_local.v4_v6
not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4
# FAILED: 15 / 16 tests passed.
On net.git:
$ ./bind_wildcard
...
not ok 14 bind_wildcard.v4_local_v6_v4mapped_any.v6_v4
not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4
# FAILED: 13 / 16 tests passed.
With this series:
$ ./bind_wildcard
...
# PASSED: 16 / 16 tests passed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a preparation patch for the following patch.
Let's define expected_errno in each test case so that we can add other test
cases easily.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The selftest passes the IPv6 address length for an IPv4 address.
We should pass the correct length.
Note inet_bind_sk() does not check if the size is larger than
sizeof(struct sockaddr_in), so there is no real bug in this
selftest.
Fixes: 13715acf8a ("selftest: Add test for bind() conflicts.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 1d56ade032 changed the function get_unpriv_disabled() to
return its results as a bool instead of updating a global variable, but
test_verifier was not updated to keep in line with these changes. Thus
unpriv_disabled is always false in test_verifier and unprivileged tests
are not properly skipped on systems with unprivileged bpf disabled.
Fixes: 1d56ade032 ("selftests/bpf: Unprivileged tests for test_loader.c")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230912120631.213139-1-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This kselftest fixes update for Linux 6.6-rc2 consists of fixes
-- kselftest runner script to propagate SIGTERM to runner child
to avoid kselftest hang.
-- to install symlinks required for test execution to avoid test
failures.
-- kselftest dependency checker script argument parsing.
-----BEGIN PGP SIGNATURE-----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=8/pm
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- kselftest runner script to propagate SIGTERM to runner child
to avoid kselftest hang
- install symlinks required for test execution to avoid test
failures
- kselftest dependency checker script argument parsing
* tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Keep symlinks, when possible
selftests: fix dependency checker script
kselftest/runner.sh: Propagate SIGTERM to runner child
selftests/ftrace: Correctly enable event in instance-event.tc
Fix to unmount the tracefs if the ftracetest mounted it for recovering
system environment. If the tracefs is already mounted, this does nothing.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/
Fixes: cbd965bde7 ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
timerlat auto-analysis takes note of all IRQs, before or after the
execution of the timerlat thread.
Because we cannot go backward in the trace (we will fix it when
moving to trace-cmd lib?), timerlat aa take note of the last IRQ
execution in the waiting for the IRQ state, and then print it
if it is executed after the expected timer IRQ starting time.
After the thread sample, the timerlat starts recording the next IRQs as
"previous" irq for the next occurrence.
However, if an IRQ happens after the thread measurement but before the
tracing stops, it is classified as a previous IRQ. That is not
wrong, as it can be "previous" for the subsequent activation. What is
wrong is considering it as a potential source for the last activation.
Ignore the IRQ interference that happens after the IRQ starting time for
now. A future improvement for timerlat can be either keeping a list of
previous IRQ execution or using the trace-cmd library. Still, it requires
further investigation - it is a new feature.
Link: https://lore.kernel.org/lkml/a44a3f5c801dcc697bacf7325b65d4a5b0460537.1691162043.git.bristot@kernel.org
Fixes: 27e348b221 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
When estimating the IRQ timer delay, we are dealing with two different
clock sources: the external clock source that timerlat uses as a reference
and the clock used by the tracer. There are also two moments: the time
reading the clock and the timer in which the event is placed in the
buffer (the trace event timestamp).
If the processor is slow or there is some hardware noise, the difference
between the timestamp and the external clock, read can be longer than the
IRQ handler delay, resulting in a negative time.
If so, set IRQ to start delay as 0. In the end, it is less near-zero and relevant
then the noise.
Link: https://lore.kernel.org/lkml/a066fb667c7136d86dcddb3c7ccd72587db3e7c7.1691162043.git.bristot@kernel.org
Fixes: 27e348b221 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
The thread thread_thread_sum accounts for thread interference
during a single activation. It was not being zeroed, so it was
accumulating thread interference over all activations.
It was not that visible when timerlat was the highest priority.
Link: https://lore.kernel.org/lkml/97bff55b0141f2d01b47d9450a5672fde147b89a.1691162043.git.bristot@kernel.org
Fixes: 27e348b221 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Cold functions and their non-cold counterparts can use _THIS_IP_ to
reference each other. Don't warn about !ENDBR in that case.
Note that for GCC this is currently irrelevant in light of the following
commit
c27cd083cf ("Compiler attributes: GCC cold function alignment workarounds")
which disabled cold functions in the kernel. However this may still be
possible with Clang.
Fixes several warnings like the following:
drivers/scsi/bnx2i/bnx2i.prelink.o: warning: objtool: bnx2i_hw_ep_disconnect+0x19d: relocation to !ENDBR: bnx2i_hw_ep_disconnect.cold+0x0
drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr4_event.cold+0x28: relocation to !ENDBR: ipvlan_addr4_event+0xda
drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr6_event.cold+0x26: relocation to !ENDBR: ipvlan_addr6_event+0xb7
drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_set_ringparam.cold+0x17: relocation to !ENDBR: tg3_set_ringparam+0x115
drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_self_test.cold+0x17: relocation to !ENDBR: tg3_self_test+0x2e1
drivers/target/iscsi/cxgbit/cxgbit.prelink.o: warning: objtool: __cxgbit_free_conn.cold+0x24: relocation to !ENDBR: __cxgbit_free_conn+0xfb
net/can/can.prelink.o: warning: objtool: can_rx_unregister.cold+0x2c: relocation to !ENDBR: can_rx_unregister+0x11b
drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_spq_post+0xc0: relocation to !ENDBR: qed_spq_post.cold+0x9a
drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_iwarp_ll2_comp_syn_pkt.cold+0x12f: relocation to !ENDBR: qed_iwarp_ll2_comp_syn_pkt+0x34b
net/tipc/tipc.prelink.o: warning: objtool: tipc_nametbl_publish.cold+0x21: relocation to !ENDBR: tipc_nametbl_publish+0xa6
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/d8f1ab6a23a6105bc023c132b105f245c7976be6.1694476559.git.jpoimboe@kernel.org
Create the config file in user_events directory of testcase which
need more kernel configuration than the default defconfig. User
could use these configs with merge_config.sh script:
The Kconfig CONFIG_USER_EVENTS=y is needed for the test to read
data from the following files,
- "/sys/kernel/tracing/user_events_data"
- "/sys/kernel/tracing/user_events_status"
- "/sys/kernel/tracing/events/user_events/*"
Enable config for specific testcase:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/user_events/config
Enable configs for all testcases:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/*/config
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When I'm debugging something with the ftrace selftests and need to look at
the logs, it becomes tedious that I need to do the following:
ls -ltr logs
[ copy the last directory ]
ls logs/<paste-last-dir>
to see where the logs are.
Instead, do the common practice of having a "latest" softlink to the last
run selftest. This way after running the selftest I only need to do:
ls logs/latest/
and it will always give me the directory of the last run selftest logs!
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When user_events is not installed the self tests currently fail. Now
that these self tests run by default we need to ensure they don't fail
when user_events was not enabled for the kernel being tested.
Add common methods to detect if tracefs and user_events is enabled. If
either is not enabled skip the test. If tracefs is enabled, but is not
mounted, mount tracefs and fail if there were any errors. Fail if not
run as root.
Fixes: 68b4d2d583 ("selftests/user_events: Reenable build")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYuugZ0OMeS6HvpSS4nuf_A3s455ecipGBvER0LJHojKZg@mail.gmail.com/
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") started propagating proper NET_XMIT_DROP error to the caller
which means it's now possible to get positive error code when calling
bpf_clone_redirect() in this particular test. Update the test to reflect
that.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-2-sdf@google.com
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Add a test to test all possible and valid allocation size for bpf
memory allocator. For each possible allocation size, the test uses
the following two steps to test the alloc and free path:
1) allocate N (N > high_watermark) objects to trigger the refill
executed in irq_work.
2) free N objects to trigger the freeing executed in irq_work.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230908133923.2675053-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To pick the changes in:
a3e7e6b179 ("libbpf: Remove HASHMAP_INIT static initialization helper")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with v197, systemd uses predictable interface network names,
the traditional interface naming scheme (eth0) is deprecated, therefore
it cannot be assumed that the eth0 interface exists on the host.
This modification makes the bind_bhash test program run in a separate
network namespace and no longer needs to consider the name of the
network interface on the host.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees/branches to the
MAINTAINERS file. That is where development now takes place and myself and
Namhyung Kim have write access, more people to come as we emulate other
maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that global variables can
be resolved and used in tools that do data profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c file was passed as
an event: "perf trace -e hello.c" to then get compiled and loaded.
The only known usage for that, that shipped with the kernel as an example for such events,
augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all
the user space components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space type beautifiers changed,
now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall types, as discussed with
Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings,
some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of
nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
#
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for
licensing reasons, and we missed a build test on tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when building with
BUILD_NONDISTRO=1 because a needed initialization routine was being "error
checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it fails.
We better back propagate the error, but at least 'perf annotate' on samples
collected for a BPF program is back working when perf is built with
BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was preventing navigation of
lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file collected
on one architecture to have registers sampled correctly displayed when
analysis tools such as 'perf report' and 'perf script' are used on a different
architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and then read
also via pipe mode with a different version of perf, where the event attr
record may have changed, use the record size field to properly support this
version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the error
message state that instead of stating that some minimal kernel version is
needed to have that feature. This seems just a tool limitation, the kernel
probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the result
of a thread__find_symbol_fb() is not matched with an addr_location__exit()
to drop the reference counts of the resolved components (machine, thread, map,
symbol, etc). Add a dlfilter test to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related to problems
found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when perf is
built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters.
- Add perf record sample filtering test, things like the following example, that gets
implemented as a BPF filter attached to the event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is linked,
using 'perf version --build-options' instead of the more expensinve
'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree, same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler format so that one can use
the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's
Google Summer of Code.
One can generate the output and upload it to the web interface but Anup also automated
everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes with/without
BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra
'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE to error routines,
so that the output can show were the parsing error was found.
- Add 'perf test' entries to check the parsing of events improvements.
- Fix various leak for things detected by -fsanitize=address, mostly things that would
be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in 'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the caller fails
to do all it needs.
- Adjust various compiler options to not consider errors some warnings when
building with broken headers found in things like python, flex, bison, as we
otherwise build with -Werror. Some for gcc, some for clang, some for some
specific version of those, some for some specific version of flex or bison, or
some specific combination of these components, bah.
- Allow customization of clang options for BPF target, this helps building on
gentoo where there are other oddities where BPF targets gets passed some compiler
options intended for the native build, so building with WERROR=0 helps while
these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock',
fixing some segfaults when handling some odd failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs (tools/perf/Documentation).
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo.
- Update scale units and descriptions of common topdown metrics on aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints.
- Update files for the power10 platform.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZPfJZgAKCRCyPKLppCJ+
J1/eAP9lgtavD0V75wy1p5zyotkceOmPTkk1DYFVx2Euhxa/lAD/YW/JvuVSo0Gr
HqJP52XaV0tF8gG+YxL+Lay/Ke0P5AQ=
=d12c
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.
The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it
fails.
We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.
- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.
One can generate the output and upload it to the web interface but
Anup also automated everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.
- Add 'perf test' entries to check the parsing of events
improvements.
- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in
'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.
- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.
- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.
- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.
- Update files for the power10 platform"
* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmT7XLYACgkQDpNsjXcp
gj6qrAf+LiAs3dUELOjrqaQQbbNGp4na+YwJCiezuvwZn8P+ieJpt6QCEDHEb1jH
LCOjr0GFMhHnAWp9Q0Qay4IXoKk8DPkA/avSaZgsl5blmMyNqFMgHklU7mjRvhCG
ayb/NeZYwrJhA9NyueXYuH3h7QDryxyIN3TZS1/7z13YrohMIQeu3q7X/ZBMh7NS
uPd7vmDj8TnZ/agQzplQ4XDov9lrzkUXDJqpMvn/Gbr4K7y66UZa3SLxi1JPrnah
ffDvBlK2OImNBoaADfiRImWc7QlXVkF/B08xUcJ6tXAeO6xJDykkie+gjsF2S040
YP2YIG+IWi47zqa25EuxFRtavwUh6w==
=4GKy
-----END PGP SIGNATURE-----
Merge tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray
Pull xarray fixes from Matthew Wilcox:
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
idr: fix param name in idr_alloc_cyclic() doc
xarray: Document necessary flag in alloc functions
XArray: Do not return sibling entries from xa_load()
Commit b81a3a100c ("tracing/histogram: Add simple tests for
stacktrace usage of synthetic events") changed the output text in
tracefs README, but missed updating some of the dependencies specified
in selftests. This causes some of the tests to exit as unsupported.
Fix this by changing the grep pattern. Since we want these tests to work
on older kernels, match only against the common last part of the
pattern.
Link: https://lore.kernel.org/linux-trace-kernel/20230614091046.2178539-1-naveen@kernel.org
Cc: <linux-kselftest@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Fixes: b81a3a100c ("tracing/histogram: Add simple tests for stacktrace usage of synthetic events")
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adding test that tries to attach program with bpf_override_return
helper to function not within error injection list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230907200652.926951-2-jolsa@kernel.org
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZPi3lxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSW+4A/3VcBRAB8/1HTTUulwUMYhF2msyAN6p5TtKl
WGVASdC1AP9NbR2Dh9HwHZmVrlwRbVlqSh9Avi+d0VNQjJKPwvtHBw==
=nU3g
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"One test fix and a __counted_by annotation"
* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix a resource leak
landlock: Annotate struct landlock_rule with __counted_by
When kselftest is built/installed with the 'gen_tar' target, rsync is
used for the installation step to copy files. Extra care is needed for
tests that have symlinks. Commit ae108c48b5 ("selftests: net: Fix
cross-tree inclusion of scripts") added '-L' (transform symlink into
referent file/dir) to rsync, to fix dangling links. However, that
broke some tests where the symlink (being a symlink) is part of the
test (e.g. exec:execveat).
Use rsync's '--copy-unsafe-links' that does right thing.
Fixes: ae108c48b5 ("selftests: net: Fix cross-tree inclusion of scripts")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch fixes inconsistencies in the parsing rules of the levels 1
and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to
account for a few edge cases that are present in some tests, also some
minor identation styling have been fixed (s/ /\t/g).
Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Timeouts in kselftest are done using the "timeout" command with the
"--foreground" option. Without the "foreground" option, it is not
possible for a user to cancel the runner using SIGINT, because the
signal is not propagated to timeout which is running in a different
process group. The "forground" options places the timeout in the same
process group as its parent, but only sends the SIGTERM (on timeout)
signal to the forked process. Unfortunately, this does not play nice
with all kselftests, e.g. "net:fcnal-test.sh", where the child
processes will linger because timeout does not send SIGTERM to the
group.
Some users have noted these hangs [1].
Fix this by nesting the timeout with an additional timeout without the
foreground option.
Link: https://lore.kernel.org/all/7650b2eb-0aee-a2b0-2e64-c9bc63210f67@alu.unizg.hr/ # [1]
Fixes: 651e0d8814 ("kselftest/runner: allow to properly deliver signals to tests")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets
are hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YpmE
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
Function instance_set() expects to enable event 'sched_switch', so we
should set 1 to its 'enable' file.
Testcase passed after this patch:
# ./ftracetest test.d/instances/instance-event.tc
=== Ftrace unit tests ===
[1] Test creation and deletion of trace instances while setting an event
[PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 97d5f2e9ee ("tools api fs: More thread safety for global
filesystem variables") introduces pthread_once, so the libpthread
should be added at link time, or we'll meet the following compile
error when 'make -C tools/mm':
gcc -Wall -Wextra -I../lib/ -o page-types page-types.c ../lib/api/libapi.a
~/linux/tools/lib/api/fs/fs.c:146: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:147: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:148: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:149: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:150: undefined reference to `pthread_once'
/usr/bin/ld: ../lib/api/libapi.a(libapi-in.o):~/linux/tools/lib/api/fs/fs.c:151:
more undefined references to `pthread_once' follow
collect2: error: ld returned 1 exit status
make: *** [Makefile:22: page-types] Error 1
Link: https://lkml.kernel.org/r/20230831034205.2376653-1-xiexiuqi@huaweicloud.com
Fixes: 97d5f2e9ee ("tools api fs: More thread safety for global filesystem variables")
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Inadvertently deleted in commit 30f4ade33d ("perf tools: Revert
enable indices setting syntax for BPF map").
Fixes: 30f4ade33d ("perf tools: Revert enable indices setting syntax for BPF map")
Reported-by: James Clark <james.clark@arm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230905033805.3094293-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Add Georgian translation to Makefile LANGUAGES in cpupower (Shuah
Khan).
- Add support for per-policy performance boost to cpufreq (Jie Zhan).
- Fix assorted issues in the cpufreq core, common governor code and in
the pcc cpufreq driver (Liao Chang).
-----BEGIN PGP SIGNATURE-----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=2mPX
-----END PGP SIGNATURE-----
Merge tag 'pm-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix cpufreq core and the pcc cpufreq driver, add per-policy
boost support to cpufreq and add Georgian translation Makefile
LANGUAGES in cpupower.
Specifics:
- Add Georgian translation to Makefile LANGUAGES in cpupower (Shuah
Khan).
- Add support for per-policy performance boost to cpufreq (Jie Zhan).
- Fix assorted issues in the cpufreq core, common governor code and
in the pcc cpufreq driver (Liao Chang)"
* tag 'pm-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Support per-policy performance boost
cpufreq: pcc: Fix the potentinal scheduling delays in target_index()
cpufreq: governor: Free dbs_data directly when gov->init() fails
cpufreq: Fix the race condition while updating the transition_task of policy
cpufreq: Avoid printing kernel addresses in cpufreq_resume()
cpupower: Add Georgian translation to Makefile LANGUAGES
- kprobes: use struct_size() for variable size kretprobe_instance
data structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
. Update BTF argument support on the functions in the kernel loadable
modules (only loaded modules are supported).
. Move generic BTF access function (search function prototype and get
function parameters) to a separated file.
. Add a function to search a member of data structure in BTF.
. Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
. Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
. Add string type checking if BTF type info is available.
This will reject if user specify ":string" type for non "char
pointer" type.
. Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmTycQkbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bqS8H/jeR1JhOzIXOvTw7XCFm
MrSY/SKi8tQfV6lau2UmoYdbYvYjpqL34XLOQPNf2/lrcL2M9aNYXk9fbhlW8enx
vkMyKQ0E5anixkF4vsTbEl9DaprxbpsPVACmZ/7VjQk2JuXIdyaNk8hno9LgIcEq
udztb0o2HmDFqAXfRi0LvlSTAIwvXZ+usmEvYpaq1g2WwrCe7NHEYl42vMpj+h4H
9l4t5rA9JyPPX4yQUjtKGW5eRVTwDTm/Gn6DRzYfYzkkiBZv27qfovzBOt672LgG
hyot+u7XeKvZx3jjnF7+mRWoH/m0dqyhyi/nPhpIE09VhgwclrbGAcDuR1x6sp01
PHY=
=hBDN
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: use struct_size() for variable size kretprobe_instance data
structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
- Update BTF argument support on the functions in the kernel
loadable modules (only loaded modules are supported).
- Move generic BTF access function (search function prototype and
get function parameters) to a separated file.
- Add a function to search a member of data structure in BTF.
- Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
- Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
- Add string type checking if BTF type info is available. This will
reject if user specify ":string" type for non "char pointer"
type.
- Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
* tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Update fprobe event example with BTF field
selftests/ftrace: Add BTF fields access testcases
tracing/fprobe-event: Assume fprobe is a return event by $retval
tracing/probes: Add string type check with BTF
tracing/probes: Support BTF field access from $retval
tracing/probes: Support BTF based data structure field access
tracing/probes: Add a function to search a member of a struct/union
tracing/probes: Move finding func-proto API and getting func-param API to trace_btf
tracing/probes: Support BTF argument on module functions
tracing/eprobe: Iterate trace_eprobe directly
kernel: kprobes: Use struct_size()
x86 self-test code.
[ Arguably the existing code was unnecessarily fragile, and
tooling should have picked up the new syscall number,
and a wider fix is being worked on - but meanwhile, let's
not have the old syscall number in the kernel tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=W86M
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 selftest fix from Ingo Molnar:
"Fix the __NR_map_shadow_stack syscall-renumbering fallout in the x86
self-test code.
[ Arguably the existing code was unnecessarily fragile, and tooling
should have picked up the new syscall number, and a wider fix is
being worked on - but meanwhile, let's not have the old syscall
number in the kernel tree. ]"
* tag 'x86-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86: Update map_shadow_stack syscall nr
A term may have no value in which case it is assumed to have a value
of 1. It doesn't just apply to alias/event terms so change the
parse_events_term__to_strbuf assert.
Commit 99e7138eb7 ("perf tools: Fail on using multiple bits long
terms without value") made it so that no_value terms could only be for a
single bit. Prior to commit 64199ae4b8 ("perf parse-events: Fix
propagation of term's no_value when cloning") this missed a test case
where config1 had no_value.
Fixes: 64199ae4b8 ("perf parse-events: Fix propagation of term's no_value when cloning")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230901233949.2930562-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible changes:
- Added a way to easier filter with cpumasks:
# echo 'cpumask & CPUS{17-42}' > /sys/kernel/tracing/events/ipi_send_cpumask/filter
- Show actual size of ring buffer after modifying the ring buffer size via
buffer_size_kb. Currently it just returns what was written, but the actual
size rounds up to the sub buffer size. Show that real size instead.
Major changes:
- Added "eventfs". This is the code that handles the inodes and dentries of
tracefs/events directory. As there are thousands of events, and each event
has several inodes and dentries that currently exist even when tracing is
never used, they take up precious memory. Instead, eventfs will allocate
the inodes and dentries in a JIT way (similar to what procfs does). There
is now metadata that handles the events and subdirectories, and will create
the inodes and dentries when they are used.
Note, I also have patches that remove the subdirectory meta data, but will
wait till the next merge window before applying them. It's a little more
complex, and I want to make sure the dynamic code works properly before
adding more complexity, making it easier to revert if need be.
Minor changes:
- Optimization to user event list traversal.
- Remove intermediate permission of tracefs files (note the intermediate
permission removes all access to the files so it is not a security concern,
but just a clean up.)
- Add the complex fix to FORTIFY_SOURCE to the kernel stack event logic.
- Other minor clean ups.
-----BEGIN PGP SIGNATURE-----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=/s+e
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Added a way to easier filter with cpumasks:
# echo 'cpumask & CPUS{17-42}' > /sys/kernel/tracing/events/ipi_send_cpumask/filter
- Show actual size of ring buffer after modifying the ring buffer
size via buffer_size_kb.
Currently it just returns what was written, but the actual size
rounds up to the sub buffer size. Show that real size instead.
Major changes:
- Added "eventfs". This is the code that handles the inodes and
dentries of tracefs/events directory. As there are thousands of
events, and each event has several inodes and dentries that
currently exist even when tracing is never used, they take up
precious memory. Instead, eventfs will allocate the inodes and
dentries in a JIT way (similar to what procfs does). There is now
metadata that handles the events and subdirectories, and will
create the inodes and dentries when they are used.
Note, I also have patches that remove the subdirectory meta data,
but will wait till the next merge window before applying them. It's
a little more complex, and I want to make sure the dynamic code
works properly before adding more complexity, making it easier to
revert if need be.
Minor changes:
- Optimization to user event list traversal
- Remove intermediate permission of tracefs files (note the
intermediate permission removes all access to the files so it is
not a security concern, but just a clean up)
- Add the complex fix to FORTIFY_SOURCE to the kernel stack event
logic
- Other minor cleanups"
* tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
tracefs: Remove kerneldoc from struct eventfs_file
tracefs: Avoid changing i_mode to a temp value
tracing/user_events: Optimize safe list traversals
ftrace: Remove empty declaration ftrace_enable_daemon() and ftrace_disable_daemon()
tracing: Remove unused function declarations
tracing/filters: Document cpumask filtering
tracing/filters: Further optimise scalar vs cpumask comparison
tracing/filters: Optimise CPU vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise scalar vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise cpumask vs cpumask filtering when user mask is a single CPU
tracing/filters: Enable filtering the CPU common field by a cpumask
tracing/filters: Enable filtering a scalar field by a cpumask
tracing/filters: Enable filtering a cpumask field by another cpumask
tracing/filters: Dynamically allocate filter_pred.regex
test: ftrace: Fix kprobe test for eventfs
eventfs: Move tracing/events to eventfs
eventfs: Implement removal of meta data from eventfs
eventfs: Implement functions to create files and dirs when accessed
eventfs: Implement eventfs lookup, read, open functions
eventfs: Implement eventfs file add functions
...
* Unbound workqueues now support more flexible affinity scopes. The default
behavior is to soft-affine according to last level cache boundaries. A
work item queued from a given LLC is executed by a worker running on the
same LLC but the worker may be moved across cache boundaries as the
scheduler sees fit. On machines which multiple L3 caches, which are
becoming more popular along with chiplet designs, this improves cache
locality while not harming work conservation too much.
Unbound workqueues are now also a lot more flexible in terms of execution
affinity. Differeing levels of affinity scopes are supported and both the
default and per-workqueue affinity settings can be modified dynamically.
This should help working around amny of sub-optimal behaviors observed
recently with asymmetric ARM CPUs.
This involved signficant restructuring of workqueue code. Nothing was
reported yet but there's some risk of subtle regressions. Should keep an
eye out.
* Rescuer workers now has more identifiable comms.
* workqueue.unbound_cpus added so that CPUs which can be used by workqueue
can be constrained early during boot.
* Now that all the in-tree users have been flushed out, trigger warning if
system-wide workqueues are flushed.
* One pull commit from for-6.5-fixes to avoid cascading conflicts in the
affinity scope patchset.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZPERlQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGVqQAPwIOy9tWY5jFAmMuIyH6wV50hbmfxCc2n5xhQNr
5HoyGgEA8lw1W7afDCIPiQVA7AYsu8dhwuNSOcRCJxhrrn4XsA0=
=g/Uu
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Unbound workqueues now support more flexible affinity scopes.
The default behavior is to soft-affine according to last level cache
boundaries. A work item queued from a given LLC is executed by a
worker running on the same LLC but the worker may be moved across
cache boundaries as the scheduler sees fit. On machines which
multiple L3 caches, which are becoming more popular along with
chiplet designs, this improves cache locality while not harming work
conservation too much.
Unbound workqueues are now also a lot more flexible in terms of
execution affinity. Differeing levels of affinity scopes are
supported and both the default and per-workqueue affinity settings
can be modified dynamically. This should help working around amny of
sub-optimal behaviors observed recently with asymmetric ARM CPUs.
This involved signficant restructuring of workqueue code. Nothing was
reported yet but there's some risk of subtle regressions. Should keep
an eye out.
- Rescuer workers now has more identifiable comms.
- workqueue.unbound_cpus added so that CPUs which can be used by
workqueue can be constrained early during boot.
- Now that all the in-tree users have been flushed out, trigger warning
if system-wide workqueues are flushed.
* tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (31 commits)
workqueue: fix data race with the pwq->stats[] increment
workqueue: Rename rescuer kworker
workqueue: Make default affinity_scope dynamically updatable
workqueue: Add "Affinity Scopes and Performance" section to documentation
workqueue: Implement non-strict affinity scope for unbound workqueues
workqueue: Add workqueue_attrs->__pod_cpumask
workqueue: Factor out need_more_worker() check and worker wake-up
workqueue: Factor out work to worker assignment and collision handling
workqueue: Add multiple affinity scopes and interface to select them
workqueue: Modularize wq_pod_type initialization
workqueue: Add tools/workqueue/wq_dump.py which prints out workqueue configuration
workqueue: Generalize unbound CPU pods
workqueue: Factor out clearing of workqueue-only attrs fields
workqueue: Factor out actual cpumask calculation to reduce subtlety in wq_update_pod()
workqueue: Initialize unbound CPU pods later in the boot
workqueue: Move wq_pod_init() below workqueue_init()
workqueue: Rename NUMA related names to use pod instead
workqueue: Rename workqueue_attrs->no_numa to ->ordered
workqueue: Make unbound workqueues to use per-cpu pool_workqueues
workqueue: Call wq_update_unbound_numa() on all CPUs in NUMA node on CPU hotplug
...
* Per-cpu cpu usage stats are now tracked. This currently isn't printed out
in the cgroupfs interface and can only be accessed through e.g. BPF.
Should decide on a not-too-ugly way to show per-cpu stats in cgroupfs.
* cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be created
below non-partition parents, which should ease the management of partition
cpusets.
* A lot of code and documentation cleanup patches.
* tools/testing/selftests/cgroup/test_cpuset.c is added. This causes trivial
conflicts in .gitignore and Makefile under the directory against
fe3b1bf19b ("selftests: cgroup: add test_zswap program"). They can be
resolved by keeping lines from both branches.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZPENTg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGcyBAP44cHwpSFxXe3cehxAzb1l/2BZXtzU5l48OqUQd
MwHyrwEAm7+MTVAR2xOF4f+oVM9KWmKj7oV7Clpixl1S7hHyjwE=
=FCc9
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Per-cpu cpu usage stats are now tracked
This currently isn't printed out in the cgroupfs interface and can
only be accessed through e.g. BPF. Should decide on a not-too-ugly
way to show per-cpu stats in cgroupfs
- cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be
created below non-partition parents, which should ease the management
of partition cpusets
- A lot of code and documentation cleanup patches
- tools/testing/selftests/cgroup/test_cpuset.c added
* tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (32 commits)
cgroup: Avoid -Wstringop-overflow warnings
cgroup:namespace: Remove unused cgroup_namespaces_init()
cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
cgroup: clean up if condition in cgroup_pidlist_start()
cgroup: fix obsolete function name in cgroup_destroy_locked()
Documentation: cgroup-v2.rst: Correct number of stats entries
cgroup: fix obsolete function name above css_free_rwork_fn()
cgroup/cpuset: fix kernel-doc
cgroup: clean up printk()
cgroup: fix obsolete comment above cgroup_create()
docs: cgroup-v1: fix typo
docs: cgroup-v1: correct the term of Page Cache organization in inode
cgroup/misc: Store atomic64_t reads to u64
cgroup/misc: Change counters to be explicit 64bit types
cgroup/misc: update struct members descriptions
cgroup: remove cgrp->kn check in css_populate_dir()
cgroup: fix obsolete function name
cgroup: use cached local variable parent in for loop
cgroup: remove obsolete comment above struct cgroupstats
cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED
...
Shadow stack's selftest utilizes the map_shadow_stack syscall. The
syscall is new with the feature, but the selftests cannot automatically
find the headers for the kernel source tree they are located in. This
resulted in the shadow stack test failing to build until the brand new
headers were installed.
To avoid this, a copy of the new uapi defines needed by the test were
included in the selftest (see link for discussion). When shadow stack was
merged the syscall number was changed, but the copy in the selftest was
not updated.
So update the copy of the syscall number define used when the required
headers are not installed, to have the final syscall number from the
merge.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/lkml/Y%2FijdXoTAATt0+Ct@zn.tnic/
Link: https://lore.kernel.org/r/20230901181652.2583861-1-rick.p.edgecombe@intel.com
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Fixes: df57721f9a ("Merge tag 'x86_shstk_for_6.6-rc1' of [...]")
Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+
t9KG0iMDXRuTsOqeEQbd
=tVnk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Highlights:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add SEL-3350 platform driver:
- Add SEL-3350 platform driver
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
MAINTAINERS:
- Add entries for Siemens IPC modules
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next:
- Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next
Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans
Move all simatic ipc drivers to the subdirectory siemens:
- Move all simatic ipc drivers to the subdirectory siemens
asus-wmi:
- corrections to egpu safety check
- Fix support for showing middle fan RPM
- expose dGPU and CPU tunables for ROG
- support setting mini-LED mode
- add safety checks to gpu switching
- don't allow eGPU switching if eGPU not connected
- add WMI method to show if egpu connected
- support middle fan custom curves
- add support for showing middle fan RPM
- add support for showing charger mode
dell-sysman:
- Fix reference leak
doc:
- TPMI: Add debugfs documentation
hp-bioscfg:
- Update steps order list elements are evaluated
- Use kmemdup() to replace kmalloc + memcpy
- Remove duplicate use of variable in inner loop
- Change how password encoding size is evaluated
- Change how enum possible values size is evaluated
- Change how order list size is evaluated
- Change how prerequisites size is evaluated
- Replace the word HACK from source code
- Fix uninitialized variable errors
- Fix memory leaks in attribute packages
- fix error reporting in hp_add_other_attributes()
- prevent a small buffer overflow
- fix a signedness bug in hp_wmi_perform_query()
- MAINTAINERS
- Makefile
- surestart-attributes
- string-attributes
- spmobj-attributes
- passwdobj-attributes
- order-list-attributes
- int-attributes
- enum-attributes
- biosattr-interface
- bioscfg
- bioscfg-h
- Documentation
ideapad-laptop:
- Add support for keyboard backlights using KBLC ACPI symbol
leds:
- simatic-ipc-leds: default config switch to platform switch
mlx-platform:
- Add dependency on PCI to Kconfig
mlxbf-bootctl:
- Support sysfs entries for MFG fields
- Support setting the ARM boot state to "OS up"
- Support the large icmc write/read
p2sb:
- Make the Kconfig symbol hidden
platform:
- mellanox: nvsw-sn2201: change fans i2c busses.
- mellanox: mlxreg-hotplug: Extend condition for notification callback processing
- mellanox: Add initial support for PCIe based programming logic device
- mellanox: mlx-platform: Get interrupt line through ACPI
- mellanox: mlx-platform: Introduce ACPI init flow
- mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
- mellanox: mlx-platform: Add reset callback
- mellanox: Cosmetic changes
- mellanox: mlx-platform: Modify power off callback
- mellanox: mlx-platform: add support for additional CPLD
- mellanox: mlx-platform: Add reset cause attribute
- mellanox: mlx-platform: Modify health and power hotplug action
- mellanox: Modify reset causes description
- mellanox: Add field upgrade capability register
- mellanox: Add new attributes
- Explicitly include correct DT includes
platform/x86/amd/pmc:
- Fix build error with randconfig
- Move PMC driver to separate directory
platform/x86/amd/pmf:
- Fix a missing cleanup path
- Use str_on_off() helper
platform/x86/intel/tpmi:
- Add debugfs interface
- Read feature control status
platform/x86/siemens:
- simatic-ipc-batt: fix logical error for BX-59A
- simatic-ipc: fix logical error for BX-59A
- simatic-ipc-batt: fix wrong pointer pass to PTR_ERR()
- simatic-ipc-batt: add support for module BX-59A
- simatic-ipc: add new models BX-56A/BX-59A
- Kconfig: adjust help text
- simatic-ipc-batt: fix bat reading in BX_21A
simatic-ipc:
- use extra module loading for watchdog
- add auto-loading of hwmon modules
- add another model
- drop PCI runtime depends and header
- add CMOS battery monitoring
- add another model BX-21A
system76:
- Handle new KBLED ACPI methods
thinkpad_acpi:
- Switch to memdup_user_nul() helper
- use lockdep annotations
- take mutex for hotkey_mask_{set,get}
tools/power/x86/intel-speed-select:
- v1.17 release
- Change mem-frequency display name
- Prevent CPU 0 offline
- Error on CPU count exceed in request
- Support more than 8 sockets.
- Fix CPU count display
watchdog:
- simatic: Use idiomatic selection of P2SB
- simatic: add PCI dependency
- make Siemens Simatic watchdog driver default on platform
- simatic-ipc-wdt: make IO region access of one model muxed
wmi-bmof:
- Update MAINTAINERS entry
- Simplify read_bmof()
- Use device_create_bin_file()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmTx720UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wHYggAgPpl4tcbqUK7S/fwVP2SzBKI+eF3
5PjO7PlMEVzyKyjHdkqoV8miMffWAGVPE+LV33Uifs5WTFjHRq2fq/Esvj9mAstG
1fCoHJ442xYkwNCUT1CCP7VsmcvV5eFXBjBantvwmIs8TyknGHwtq1h+d95evp4n
2uyQlRMmrWh/+8fjD8x5V35T0tky+4a4EX2WNLul13LlHCybGT/F2Kq456WdthjJ
zTQSL+qAMWmAiQKSEmhI3bRnFYPdpTetjiNSTlQczch8Y4qV3mJQlnkyDPX7SM9w
M2uZ4W39Ptxihx0ks/MIcuA4yrTfUX8BnhMTD29ZYCKHS7xBqW8YC5HQug==
=GaQL
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
* Support for the new "riscv,isa-extensions" and "riscv,isa-base" device
tree interfaces for probing extensions.
* Support for userspace access to the performance counters.
* Support for more instructions in kprobes.
* Crash kernels can be allocated above 4GiB.
* Support for KCFI.
* Support for ELFs in !MMU configurations.
* ARCH_KMALLOC_MINALIGN has been reduced to 8.
* mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel).
* Also various fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmTx96kTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiVjRD/9DYVLlkQ/OEDJjPaEcYCP49xgIVUUU
lhs3XbSs2VNHBaiG114f6Q0AaT/uNi+uqSej3CeTmEot2kZkBk/f2yu+UNIriPZ9
GQiZsdyXhu921C+5VFtiI47KDWOVZ+Jpy3M1ll61IWt3yPSQHr1xOP0AOiyHHqe3
cmqpNnzjajlfVDoXPc2mGGzUJt/7ar4thcwnMNi98raXR5Qh7SP6rrHjoQhE1oFk
LMP3CHqEAcHE2tE4CxZVpc6HOQ5m0LpQIOK7ypufGMyoIYESm5dt/JOT4MlhTtDw
6JzyVKtiM7lartUnUaW3ZoX4trQYT5gbXxWrJ2gCnUGy3VulikoXr1Rpz0qfdeOR
XN8OLkVAqHfTGFI7oKk24f9Adw96R5NPZcdCay90h4J/kMfCiC7ZyUUI1XIa5iy1
np5pZCkf8HNcdywML7qcFd5n2O0wchyFnRLFZo6kJP9Ls5cEi6kBx/1jSdTcNgx/
fUKXyoEcriGoQiiwn29+4RZnU69gJV3zqQNLPpuwDQ5F/Q1zHTlrr+dqzezKkzcO
dRTV2d2Q4A5vIDXPptzNNLlRQdrc8qxPJ1lxQVkPIU4/mtqczmZBwlyY2u9zwPyS
sehJgJZnoAf+jm71NgQAKLck4MUBsMnMogOWunhXkVRCoZlbbkUWX4ECZYwPKsVk
W7zVPmLvSM0l5g==
=/tXb
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the new "riscv,isa-extensions" and "riscv,isa-base"
device tree interfaces for probing extensions
- Support for userspace access to the performance counters
- Support for more instructions in kprobes
- Crash kernels can be allocated above 4GiB
- Support for KCFI
- Support for ELFs in !MMU configurations
- ARCH_KMALLOC_MINALIGN has been reduced to 8
- mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel)
- Also various fixes and cleanups
* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
riscv: support PREEMPT_DYNAMIC with static keys
riscv: Move create_tmp_mapping() to init sections
riscv: Mark KASAN tmp* page tables variables as static
riscv: mm: use bitmap_zero() API
riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
riscv: remove redundant mv instructions
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
...
While commit 90f0074cd9 ("selftests/bpf: fix a CI failure caused by vsock sockmap test")
fixes a receive failure of vsock sockmap test, there is still a write failure:
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
./test_progs:vsock_unix_redir_connectible:1501: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
The reason is that the vsock connection in the test is set to ESTABLISHED state
by function virtio_transport_recv_pkt, which is executed in a workqueue thread,
so when the user space test thread runs before the workqueue thread, this
problem occurs.
To fix it, before writing the connection, wait for it to be connected.
Fixes: d61bd8c1fd ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901031037.3314007-1-xukuohai@huaweicloud.com
The test uses perf stat to count the number of fib:fib_table_lookup
tracepoint hits for IPv4 and the number of fib6:fib6_table_lookup for
IPv6. The measured count is checked to be within 5% of the total number
of packets sent via veth1.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using the "install" or targets depending on install, e.g. "gen_tar",
the BPF machine flavors weren't included.
A command like:
| make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- O=/workspace/kbuild \
| HOSTCC=gcc FORMAT= SKIP_TARGETS="arm64 ia64 powerpc sparc64 x86 sgx" \
| -C tools/testing/selftests gen_tar
would not include bpf/no_alu32, bpf/cpuv4, or bpf/bpf-gcc.
Include the BPF machine flavors for "install" make target.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831162954.111485-1-bjorn@kernel.org
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system.
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix
MMU to avoid a broadcast TLBIE flush on exit.
- Drop the exclusion between ptrace/perf watchpoints, and drop the now unused
associated arch hooks.
- Add support for the "nohlt" command line option to disable CPU idle.
- Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1.
- Rework memory block size determination, and support 256MB size on systems
with GPUs that have hotpluggable memory.
- Various other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev,
Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand,
Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin
Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He,
Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara
R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick
Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell
Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav
Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, Zheng Zengkai.
-----BEGIN PGP SIGNATURE-----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=5g7K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
The no_value field in 'struct parse_events_term' indicates that the val
variable isn't used, the case for an event name.
Cloning wasn't propagating this, making cloned event name terms
appearing to have a constant assinged to them.
Working around the bug would check for a value of 1 assigned to value,
but then this meant a user value of 1 couldn't be differentiated causing
the value to be lost in debug printing and perf list.
The change fixes the cloning and updates the "val.num ==/!= 1" tests to
use no_value instead.
To better check the no_value is set appropriately parameter comments are
added for constant values.
This found that no_value wasn't set correctly in parse_events_multi_pmu_add,
which matters now that no_value is used to indicate an event name.
Fixes: 7a6e916447 ("perf parse-events: Make common term list to strbuf helper")
Fixes: 99e7138eb7 ("perf tools: Fail on using multiple bits long terms without value")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831071421.2201358-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Name the enums used by 'struct parse_events_term' to
parse_events__term_val_type and parse_events__term_type.
This allows greater compile time error checking.
Fix -Wswitch related issues by explicitly listing all enum values prior
to default.
Add config_term_name to safely look up a parse_events__term_type name,
bounds checking the array access first.
Add documentation to 'struct parse_events_terms' and reorder to save
space.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831071421.2201358-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"default_core" was added as a way to demark JSON events whose PMU should
be whatever the default core PMU is, previously this had been assumed to
be "cpu" but that fails on s390 and ARM.
'perf list' displays the PMU in the event description to save storing it
in JSON, but was still comparing against "cpu" and not "default_core",
so update this.
Fixes: d2045f8715 ("perf jevents: Use "default_core" for events with no Unit")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831071421.2201358-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert IBT selftest to asm to fix objtool warning
-----BEGIN PGP SIGNATURE-----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=3UUm
-----END PGP SIGNATURE-----
Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
-----BEGIN PGP SIGNATURE-----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=WC5V
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM: x86: SVM changes for 6.6:
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
-----BEGIN PGP SIGNATURE-----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=E2KD
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----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=dHTQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM: x86: Selftests changes for 6.6:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
Recent commit [1] broke d_path test, because now filp_close is not called
directly from sys_close, but eventually later when the file is finally
released.
As suggested by Hou Tao we don't need to re-hook the bpf program, but just
instead we can use sys_close_range to trigger filp_close synchronously.
[1] 021a160abf ("fs: use __fput_sync in close(2)")
Suggested-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831141103.359810-1-jolsa@kernel.org
Charlie Jenkins <charlie@rivosinc.com> says:
Make sv48 the default address space for mmap as some applications
currently depend on this assumption. Users can now select a
desired address space using a non-zero hint address to mmap. Previously,
requesting the default address space from mmap by passing zero as the hint
address would result in using the largest address space possible. Some
applications depend on empty bits in the virtual address space, like Go and
Java, so this patch provides more flexibility for application developers.
* b4-shazam-merge:
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
Link: https://lore.kernel.org/r/20230809232218.849726-1-charlie@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This includes a shared branch with VFIO:
- Enhance VFIO_DEVICE_GET_PCI_HOT_RESET_INFO so it can work with iommufd
FDs, not just group FDs. This removes the last place in the uAPI that
required the group fd.
- Give VFIO a new device node /dev/vfio/devices/vfioX (the so called cdev
node) which is very similar to the FD from VFIO_GROUP_GET_DEVICE_FD.
The cdev is associated with the struct device that the VFIO driver is
bound to and shows up in sysfs in the normal way.
- Add a cdev IOCTL VFIO_DEVICE_BIND_IOMMUFD which allows a newly opened
/dev/vfio/devices/vfioX to be associated with an IOMMUFD, this replaces
the VFIO_GROUP_SET_CONTAINER flow.
- Add cdev IOCTLs VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT to allow the IOMMU
translation the vfio_device is associated with to be changed. This is a
significant new feature for VFIO as previously each vfio_device was
fixed to a single translation.
The translation is under the control of iommufd, so it can be any of
the different translation modes that iommufd is learning to create.
At this point VFIO has compilation options to remove the legacy interfaces
and in modern mode it behaves like a normal driver subsystem. The
/dev/vfio/iommu and /dev/vfio/groupX nodes are not present and each
vfio_device only has a /dev/vfio/devices/vfioX cdev node that represents
the device.
On top of this is built some of the new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that hold
the translation mapping. This is the basic functionality for the
normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors when
emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW that
owns a VFIO device. This includes support for the Intel iommu, and
patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kapis iommufd_ctx_has_group(), iommufd_device_to_ictx(),
iommufd_device_to_id(), iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some per-group
data
- Reorganize how the internal hwpt allocation flows to have more robust
locking
- Improve the access interfaces to support detach and replace of an IOAS
from an access
- New selftests and a rework of how the selftests creates a mock iommu
driver to be more like a real iommu driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZO/QDQAKCRCFwuHvBreF
YZ2iAP4hNEF6MJLRI2A28V3I/80f3x9Ed3Cirp/Q8ZdVEE+HYQD8DFaafJ0y3iPQ
5mxD4ZrZ9KfUns/gUqCT5oPHjrcvSAM=
=EQCw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"On top of the vfio updates is built some new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that
hold the translation mapping. This is the basic functionality for
the normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors
when emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
that owns a VFIO device. This includes support for the Intel iommu,
and patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kernel APIs: iommufd_ctx_has_group(),
iommufd_device_to_ictx(), iommufd_device_to_id(),
iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some
per-group data
- Reorganize how the internal hwpt allocation flows to have more
robust locking
- Improve the access interfaces to support detach and replace of an
IOAS from an access
- New selftests and a rework of how the selftests creates a mock
iommu driver to be more like a real iommu driver"
Link: https://lore.kernel.org/lkml/ZO%2FTe6LU1ENf58ZW@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
iommufd/selftest: Don't leak the platform device memory when unloading the module
iommu/vt-d: Implement hw_info for iommu capability query
iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
iommufd: Add IOMMU_GET_HW_INFO
iommu: Add new iommu op to get iommu hardware information
iommu: Move dev_iommu_ops() to private header
iommufd: Remove iommufd_ref_to_users()
iommufd/selftest: Make the mock iommu driver into a real driver
vfio: Support IO page table replacement
iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
iommufd: Add iommufd_access_replace() API
iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
iommufd: Add iommufd_access_change_ioas(_id) helpers
iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
iommufd/selftest: Return the real idev id from selftest mock_domain
iommufd: Add IOMMU_HWPT_ALLOC
iommufd/selftest: Test iommufd_device_replace()
iommufd: Make destroy_rwsem use a lock class per object type
...
The metric is using the wrong format encoding. This fix is in the
converter script PR: https://github.com/intel/perfmon/pull/101
Committer testing:
Tested on a Lenovo t480s, before 'perf test 100' was failing with:
# perf test 100
100: perf all metrics test : FAILED!
With 'perf test -vv 100' we can see:
<SNIP>
Testing MemoryBW
Not grouping metric tma_fb_full's events.
Try disabling the NMI watchdog to comply NO_NMI_WATCHDOG metric constraint:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
event syntax error: '...DATA_READ/thresh=1,metric-id=UNC_ARB_TRK_OCCUPANCY.DATA_READ!3thresh!21!3/,UNC_ARB_TRK_OCCUPANCY.DATA_READ/metric-id=UNC_ARB_TRK_OCCUPANCY.DATA_READ/}:W,duration_time'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'UNC_ARB_TRK_OCCUPANCY.DATA_READ'
<SNIP>
With the patch this problem is gone.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20230830175543.1911892-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The introduction of reference counting causes the v0 API
perf_dlfilter_fns.resolve_address() to leak.
v2 API introduced perf_dlfilter_fns.al_cleanup() to prevent that.
For the v0 API, avoid the leak by exiting the addr_location immediately,
since the documentation makes it clear that pointers obtained via
perf_dlfilter_fns are not necessarily valid (dereferenceable) after
'filter_event' and 'filter_event_early' return.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Closes: https://lore.kernel.org/oe-lkp/202308232146.94d82cb4-oliver.sang@intel.com
Link: http://lore.kernel.org/lkml/20230830090539.68206-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Returns the number of CPUs online, unlike #num_cpus that returns the
number present.
Add a test of the property.
This will be used in future Intel metrics.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830073026.1829912-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the value is only used in perf list.
Compute the value just when needed to avoid unnecessary overhead.
Recycle the strbuf to avoid memory allocation overhead.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830070753.1821629-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A term list is turned into a string for debug output and for the str
value in the alias.
Add a helper to do this based on existing code, but then fix for
situations like events being identified.
Use strbuf to manage the dynamic memory allocation and remove the 256
byte limit.
Use in various places the string of the term list is required.
Before:
$ sudo perf stat -vv -e inst_retired.any true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'cpu' with 'inst_retired.any,' that may result in non-fatal errors
After aliases, add event pmu 'cpu' with 'event,period,' that may result in non-fatal errors
inst_retired.any -> cpu/inst_retired.any/
...
After:
$ sudo perf stat -vv -e inst_retired.any true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempt to add: cpu/inst_retired.any/
..after resolving event: cpu/event=0xc0,period=0x1e8483/
inst_retired.any -> cpu/event=0xc0,period=0x1e8483/
...
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830070753.1821629-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Be more specific and fix a typo.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830070753.1821629-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
alias is allocated with malloc allowing uninitialized memory to be
accessed.
The initialization of str was moved late after it could have been
updated by a JSON event, however, this create a potential for an
uninitialized use.
Fix this by assigning str to NULL early.
Testing on ARM (Raspberry Pi) showed a memory leak in the same code so
add a zfree.
Fixes: f63a536f03 ("perf pmu: Merge JSON events with sysfs at load time")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230830000545.1638964-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit;
this also involves enabling UML builds of ALSA since that's the
default KUnit test environment which pulls in the addition of some
stubs to the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements
-----BEGIN PGP SIGNATURE-----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=Rr0i
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
coalescing lots of silly duplicates.
* Use static_calls() instead of indirect calls for apic->foo()
* Tons of cleanups an crap removal along the way
-----BEGIN PGP SIGNATURE-----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=eoKm
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
Occasionally, with './test_progs -j' on my vm, I will hit the
following failure:
test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
test_cgroup_iter_sleepable:PASS:skel_open 0 nsec
test_cgroup_iter_sleepable:PASS:skel_load 0 nsec
test_cgroup_iter_sleepable:PASS:attach_iter 0 nsec
test_cgroup_iter_sleepable:PASS:iter_create 0 nsec
test_cgroup_iter_sleepable:FAIL:cgroup_id unexpected cgroup_id: actual 1 != expected 2812
#48/5 cgrp_local_storage/cgroup_iter_sleepable:FAIL
#48 cgrp_local_storage:FAIL
Finally, I decided to do some investigation since the test is introduced
by myself. It turns out the reason is due to cgroup_fd with value 0.
In cgroup_iter, a cgroup_fd of value 0 means the root cgroup.
/* from cgroup_iter.c */
if (fd)
cgrp = cgroup_v1v2_get_from_fd(fd);
else if (id)
cgrp = cgroup_get_from_id(id);
else /* walk the entire hierarchy by default. */
cgrp = cgroup_get_from_path("/");
That is why we got cgroup_id 1 instead of expected 2812.
Why we got a cgroup_fd 0? Nobody should really touch 'stdin' (fd 0) in
test_progs. I traced 'close' syscall with stack trace and found the root
cause, which is a bug in bpf_obj_pinning.c. Basically, the code closed
fd 0 although it should not. Fixing the bug in bpf_obj_pinning.c also
resolved the above cgroup_iter_sleepable subtest failure.
Fixes: 3b22f98e5a ("selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230827150551.1743497-1-yonghong.song@linux.dev
Quentin reported build warnings when building bpftool :
link.c: In function ‘perf_config_hw_cache_str’:
link.c:86:18: warning: comparison of unsigned expression in ‘>= 0’ is always true [-Wtype-limits]
86 | if ((id) >= 0 && (id) < ARRAY_SIZE(array)) \
| ^~
link.c:320:20: note: in expansion of macro ‘perf_event_name’
320 | hw_cache = perf_event_name(evsel__hw_cache, config & 0xff);
| ^~~~~~~~~~~~~~~
[... more of the same for the other calls to perf_event_name ...]
He also pointed out the reason and the solution:
We're always passing unsigned, so it should be safe to drop the check on
(id) >= 0.
Fixes: 62b57e3ddd ("bpftool: Add perf event names")
Reported-by: Quentin Monnet <quentin@isovalent.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Closes: https://lore.kernel.org/bpf/a35d9a2d-54a0-49ec-9ed1-8fcf1369d3cc@isovalent.com
Link: https://lore.kernel.org/bpf/20230830030325.3786-1-laoar.shao@gmail.com
-----BEGIN PGP SIGNATURE-----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=p1bd
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
-----BEGIN PGP SIGNATURE-----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=XS+G
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Fairly quiet round in terms of features, mostly just improvements all
over the map for existing code. In detail:
- Initial support for socket operations through io_uring. Latter half
of this will likely land with the 6.7 kernel, then allowing things
like get/setsockopt (Breno)
- Cleanup of the cancel code, and then adding support for canceling
requests with the opcode as the key (me)
- Improvements for the io-wq locking (me)
- Fix affinity setting for SQPOLL based io-wq (me)
- Remove the io_uring userspace code. These were added initially as
copies from liburing, but all of them have since bitrotted and are
way out of date at this point. Rather than attempt to keep them in
sync, just get rid of them. People will have liburing available
anyway for these examples. (Pavel)
- Series improving the CQ/SQ ring caching (Pavel)
- Misc fixes and cleanups (Pavel, Yue, me)"
* tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux: (47 commits)
io_uring: move iopoll ctx fields around
io_uring: move multishot cqe cache in ctx
io_uring: separate task_work/waiting cache line
io_uring: banish non-hot data to end of io_ring_ctx
io_uring: move non aligned field to the end
io_uring: add option to remove SQ indirection
io_uring: compact SQ/CQ heads/tails
io_uring: force inline io_fill_cqe_req
io_uring: merge iopoll and normal completion paths
io_uring: reorder cqring_flush and wakeups
io_uring: optimise extra io_get_cqe null check
io_uring: refactor __io_get_cqe()
io_uring: simplify big_cqe handling
io_uring: cqe init hardening
io_uring: improve cqe !tracing hot path
io_uring/rsrc: Annotate struct io_mapped_ubuf with __counted_by
io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used
io_uring: simplify io_run_task_work_sig return
io_uring/rsrc: keep one global dummy_ubuf
io_uring: never overflow io_aux_cqe
...
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
This cpupower update for Linux 6.6-rc2 consists of a single fix to
add Georgian translation to Makefile LANGUAGES.
-----BEGIN PGP SIGNATURE-----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=8SPj
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge additional cpupower utility update for 6.6 from Shuah Khan:
"This cpupower update [...] consists of a single fix to add Georgian
translation to Makefile LANGUAGES."
* tag 'linux-cpupower-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Add Georgian translation to Makefile LANGUAGES
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
API:
- Move crypto engine callback from tfm ctx into algorithm object.
- Fix atomic sleep bug in crypto_destroy_instance.
- Move lib/mpi into lib/crypto.
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10.
Drivers:
- Add AES skcipher and aead support to starfive.
- Add Dynamic Boost Control support to ccp.
- Add support for STM32P13 platform to stm32.
-----BEGIN PGP SIGNATURE-----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=LbcA
-----END PGP SIGNATURE-----
Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
The JSON Unit field encodes the name of the PMU to match the events
to. When no name is given it has meant the "cpu" core PMU except for
tests.
On ARM, Intel hybrid and s390 the core PMU is named differently which
means that using "cpu" for this case causes the events not to get
matched to the PMU.
Introduce a new "default_core" string for this case and in the
pmu__name_match force all core PMUs to match this name.
Fixes: 2e255b4f9f ("perf jevents: Group events by PMU")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230826062203.1058041-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It has system-wide test and cpu-list test but the cpu-list test fails
sometimes. It runs sleep command on CPU1 and measure both user.slice
and system.slice cgroups by default (on systemd-based systems).
But if the system was idle enough, sometime the system.slice gets no
count and it makes the test failing. Maybe that's because it only looks
at the CPU1, let's add CPU0 to increase the chance it finds some tasks.
Fixes: 7901086014 ("perf test: Add a new test for perf stat cgroup BPF counter")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of now, bpf counters (bperf) don't support event groups. But the
default perf stat includes topdown metrics if supported (on recent Intel
machines) which require groups. That makes perf stat exiting.
$ sudo perf stat --bpf-counter true
bpf managed perf events do not yet support groups.
Actually the test explicitly uses cycles event only, but it missed to
pass the option when it checks the availability of the command.
Fixes: 2c0cb9f560 ("perf test: Add a shell test for 'perf stat --bpf-counters' new option")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The BPF sample filtering requires two kernel changes below:
* bpf_cast_to_kernel_ctx() kfunc (added in v6.2)
* setting perf_sample_data->sample_flags (finished in v6.3)
The perf tools can check bpf_cast_to_kernel_ctx() easily so it can
refuse BPF filters on those old kernels (v6.1 and earlier).
But checking sample_flags appears to be difficult so current code won't
work on v6.2 kernel. That's unfortunate but I don't know what's the
correct way to handle it.
For now, let's skip v6.2 kernels explicitly (if failed) in the test.
Fixes: 9575ecdd19 ("perf test: Add perf record sample filtering test")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now there's no in-tree user of the field. To remove the possible bug
later, let's get rid of the 'id' field and add a comment for that.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230825152552.112913-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of accessing the attr.id directly, use the
perf_record_header_attr_id() helper to handle old versions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230825152552.112913-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The HEADER_ATTR record has an event attr followed by the id array. But
perf data from a different version could have different size of attr.
So it cannot just use event->attr.id to access the array. Let's add the
perf_record_header_attr_id() macro to calculate the start of the array.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230825152552.112913-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PERF_RECORD_ATTR is used for a pipe mode to describe an event with
attribute and IDs. The ID table comes after the attr and it calculate
size of the table using the total record size and the attr size.
n_ids = (total_record_size - end_of_the_attr_field) / sizeof(u64)
This is fine for most use cases, but sometimes it saves the pipe output
in a file and then process it later. And it becomes a problem if there
is a change in attr size between the record and report.
$ perf record -o- > perf-pipe.data # old version
$ perf report -i- < perf-pipe.data # new version
For example, if the attr size is 128 and it has 4 IDs, then it would
save them in 168 byte like below:
8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
128 byte: perf event attr { .size = 128, ... },
32 byte: event IDs [] = { 1234, 1235, 1236, 1237 },
But when report later, it thinks the attr size is 136 then it only read
the last 3 entries as ID.
8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
136 byte: perf event attr { .size = 136, ... },
24 byte: event IDs [] = { 1235, 1236, 1237 }, // 1234 is missing
So it should use the recorded version of the attr. The attr has the
size field already then it should honor the size when reading data.
Fixes: 2c46dbb517 ("perf: Convert perf header attrs into attr events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825152552.112913-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a PMUs scan that ignores duplicates. When there are multiple PMUs
that differ only by suffix, by default just list the first one and
skip all others. The scan routine checks that the PMU names match but
doesn't enforce that the numbers are consecutive as for some PMUs
there are gaps. If "-v" is passed to "perf list" then list all PMUs.
With the previous change duplicate PMUs are no longer printed but the
suffix of the first is printed. When duplicate PMUs are being skipped
avoid printing the suffix.
Before:
$ perf list
...
uncore_imc_free_running_0/data_read/ [Kernel PMU event]
uncore_imc_free_running_0/data_total/ [Kernel PMU event]
uncore_imc_free_running_0/data_write/ [Kernel PMU event]
uncore_imc_free_running_1/data_read/ [Kernel PMU event]
uncore_imc_free_running_1/data_total/ [Kernel PMU event]
uncore_imc_free_running_1/data_write/ [Kernel PMU event]
After:
$ perf list
...
uncore_imc_free_running/data_read/ [Kernel PMU event]
uncore_imc_free_running/data_total/ [Kernel PMU event]
uncore_imc_free_running/data_write/ [Kernel PMU event]
...
$ perf list -v
uncore_imc_free_running_0/data_read/ [Kernel PMU event]
uncore_imc_free_running_0/data_total/ [Kernel PMU event]
uncore_imc_free_running_0/data_write/ [Kernel PMU event]
uncore_imc_free_running_1/data_read/ [Kernel PMU event]
uncore_imc_free_running_1/data_total/ [Kernel PMU event]
uncore_imc_free_running_1/data_write/ [Kernel PMU event]
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230825135237.921058-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sort PMUs by name. If two PMUs have the same name but differ by
suffix, sort the suffixes numerically.
For example, "breakpoint" comes before "cpu",
"uncore_imc_free_running_0" comes before "uncore_imc_free_running_1".
Suffixes need to be treated specially as otherwise they will be ordered
like 0, 1, 10, 11, .., 2, 20, 21, .., etc. Only PMUs starting 'uncore_'
are considered to have a potential suffix.
Sorting of PMUs is done so that later patches can skip duplicate uncore
PMUs that differ only by there suffix.
Committer notes:
Used the more compact, intention revealing strstarts() function we got
from the kernel sources:
- if (strncmp(str, "uncore_", 7))
+ if (!strstarts(str, "uncore_"))
Also in pmus_cmp() the lhs_num and rhs_num variables may end up not
being set for non "uncore_" prefixed PMUs in pmu_name_len_no_suffix(),
or at least gcc 7.5 in some distros (opensuse 15.5, to be EOLed in
Dec/2024) thins so, so initialize both to zero.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230825135237.921058-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"[" is part of the shell builtin test (and a synonym for it),
not a link to the external command /usr/bin/test.
Using the "test" is simpler because it avoids a lot of "[]".
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongarch@lists.linux.dev
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/c50bc0a92dce0ff0fa6504c1a52fb53e2ac007bf.1692962043.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To address this error:
grep: /root/linux-next/tools/arch/xxxxx/include/uapi/asm//mman.h:
No such file or directory
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongarch@lists.linux.dev
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/42e8e3565d6035302907426c1e65483b2a4007f5.1692962043.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define these macros so that the CPU name can be displayed when running
'perf report' and 'perf timechart'.
Committer notes:
No need to have:
if (strcasestr(buf, "Model Name")) {
strlcpy(cpu_m, &buf[13], 255);
break;
} else if (strcasestr(buf, "model name")) {
strlcpy(cpu_m, &buf[13], 255);
break;
}
As the point of strcasestr() is to be case insensitive to both the
haystack and the needle, so simplify the above to just:
if (strcasestr(buf, "model name")) {
strlcpy(cpu_m, &buf[13], 255);
break;
}
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongarch@lists.linux.dev
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/db968a186a10e4629fe10c26a1210f7126ad41ec.1692962043.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a much quieter release than the past few, there's one small API
addition that I noticed a user for in ALSA and a bunch of cleanups:
- Provide an interface for determining if a register is present in the
cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary bodges
that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp43QACgkQJNaLcl1U
h9BjUQf/RDJztYDL/ELIxVPfdFWAgTfAErcRgKpdpnrhMR0GljGYNyrTMwUBbnuF
+EL2v+k34wDNGobLbnGaHJIMb+r26QrHCoX9Zm0r/b5z9v3yS3QXco/MueZyMz45
SYbiEUnXj/WjYUUtVpVw6nxnREH6XpOZ1080XF4Bg9YpyCiq7128WJwivuT8XLJM
qZSb4DOQXFV26nitpTuJMkRIS1FgIh5ZKAPWpvZfP+wOStZhW3IFGlWIAkOQQ5gK
PqFA0BQV1fOVttjRGAR2sKCS4MfuIkIHmCfSfvNfLQG2GW86zb+Bpi0BFEUnl4Py
dqzztIknq19fWe9mCElSrdww25M2vg==
=fqmz
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a much quieter release than the past few, there's one small
API addition that I noticed a user for in ALSA and a bunch of
cleanups:
- Provide an interface for determining if a register is present in
the cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary
bodges that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support"
* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix the type used for a bitmap pointer
regmap: Remove dynamic allocation warnings for rbtree and maple
regmap: rbtree: Use alloc_flags for memory allocations
regmap: maple: Use alloc_flags for memory allocations
regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
ALSA: hda: Use regcache_reg_cached() rather than open coding
regmap: Provide test for regcache_reg_present()
regmap: Let users check if a register is cached
regmap: Provide user selectable option to enable regmap
regmap: mmio: Remove unused 64-bit support code
regmap: cache: Revert "Add 64-bit mode support"
regmap: Revert "add 64-bit mode support" and Co.
This nolibc update for Linux 6.6-rc1 consists of:
Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts,
path to log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmTs4xUACgkQCwJExA0N
QxyVjg//XGpM5P8JXfn2lsLXa+vPOkIKCY26RRTLUb8TJygTLpQY/aOh98pKCGbr
naudKubMLlhYhS7HSJXvH6rNkidsU7YiW8RTbHICHsB1Lqbqic2C8y34EOBJpalN
mYfidcwVdmUeJLBEiL5W4T5ip2FIHy5lhN4NeN7x0bHBkcXvkzL8/7QngjPB7Nmy
ibyPmtv/1m83+jmAOzDgNHJPIc0utjGynkKWBAd7SWClCWvS+22V5YgqCHaXN+1R
5RMDlJ+AqknniEmUouF7qfsbAI02uhKy8Gpmju6ghLjqN/4V3NNSuftXXT+x1L+x
L277L5s/RNfaXgzaXoUfIdnFeHhDhL0dJxBek/5LZdCy4rQWbn3VN1VI1NtGDnM1
BTHdDNirqxkKsXleSi3zXQptxvGLeP/E0loNd74ZlmOqNhZdt3bQdv53evDBSjGa
UvCfGC3r+AyKsxzXUbz+fPuQ+9yw5g1VJBKMol7lbiBmmYb3y7nXj2nPTkRU84Ge
twRo2ctF62a2d9hw/U/D7hFGYnzOosl3NmbrzAKWAGqXQ5jpWPbfeU/7bjVeW7d1
cuTGJtPHSVtCTaMnktHT+F9+Uh9SOFtUj/WMESvu6Y7iQRERqoXcHJuBhrms6r7S
DGKxHuVwopcuGXdNoKI/nyT4lApee33S5WcKMV2t85eoXAfe4EY=
=OCH0
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts, path to
log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer"
* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
tools/nolibc: avoid undesired casts in the __sysret() macro
tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
tools/nolibc: silence ppc64 compile warnings
selftests/nolibc: libc-test: use HOSTCC instead of CC
tools/nolibc: stackprotector.h: make __stack_chk_init static
selftests/nolibc: allow report with existing test log
selftests/nolibc: add test support for ppc64
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc
selftests/nolibc: add XARCH and ARCH mapping support
tools/nolibc: add support for powerpc64
tools/nolibc: add support for powerpc
MAINTAINERS: nolibc: add myself as co-maintainer
selftests/nolibc: enable compiler warnings
selftests/nolibc: don't strip nolibc-test
selftests/nolibc: prevent out of bounds access in expect_vfprintf
selftests/nolibc: use correct return type for read() and write()
selftests/nolibc: avoid sign-compare warnings
selftests/nolibc: avoid unused parameter warnings
selftests/nolibc: make functions static if possible
...
This kunit update for Linux 6.6.rc1 consists of:
-- Adds support for running Rust documentation tests as KUnit tests
-- Makes init, str, sync, types doctests compilable/testable
-- Adds support for attributes API which include speed, modules
attributes, ability to filter and report attributes.
-- Adds support for marking tests slow using attributes API.
-- Adds attributes API documentation
-- Fixes to wild-memory-access bug in kunit_filter_suites() and
a possible memory leak in kunit_filter_suites()
-- Adds support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests.
-----BEGIN PGP SIGNATURE-----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=Nsb8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- add support for running Rust documentation tests as KUnit tests
- make init, str, sync, types doctests compilable/testable
- add support for attributes API which include speed, modules
attributes, ability to filter and report attributes
- add support for marking tests slow using attributes API
- add attributes API documentation
- fix a wild-memory-access bug in kunit_filter_suites() and a possible
memory leak in kunit_filter_suites()
- add support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests
* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
kunit: fix struct kunit_attr header
kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
kunit: Allow kunit test modules to use test filtering
kunit: Make 'list' action available to kunit test modules
kunit: Report the count of test suites in a module
kunit: fix uninitialized variables bug in attributes filtering
kunit: fix possible memory leak in kunit_filter_suites()
kunit: fix wild-memory-access bug in kunit_filter_suites()
kunit: Add documentation of KUnit test attributes
kunit: add tests for filtering attributes
kunit: time: Mark test as slow using test attributes
kunit: memcpy: Mark tests as slow using test attributes
kunit: tool: Add command line interface to filter and report attributes
kunit: Add ability to filter attributes
kunit: Add module attribute
kunit: Add speed attribute
kunit: Add test attributes API structure
MAINTAINERS: add Rust KUnit files to the KUnit entry
rust: support running Rust documentation tests as KUnit ones
rust: types: make doctests compilable/testable
...
This Kselftest update for Linux 6.6-rc1 consists of a mix of fixes,
enhancements, and new tests. Bulk of the changes enhance and fix
rseq and resctrl tests. In addition, user_events, dmabuf-heaps and
perf_events are added to default kselftest build and test coverage.
A futex test fix, enhance prctl test coverage, and minor fixes are
included in this update.
-----BEGIN PGP SIGNATURE-----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=6fP4
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"A mix of fixes, enhancements, and new tests. Bulk of the changes
enhance and fix rseq and resctrl tests.
In addition, user_events, dmabuf-heaps and perf_events are added to
default kselftest build and test coverage. A futex test fix, enhance
prctl test coverage, and minor fixes are included in this update"
* tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (32 commits)
selftests: cachestat: use proper syscall number macro
selftests: cachestat: properly link in librt
selftests/futex: Order calls to futex_lock_pi
selftests: Hook more tests into the build infrastructure
selftests/user_events: Reenable build
selftests/filesystems: Add six consecutive 'x' characters to mktemp
selftests/rseq: Use rseq_unqual_scalar_typeof in macros
selftests/rseq: Fix arm64 buggy load-acquire/store-release macros
selftests/rseq: Implement rseq_unqual_scalar_typeof
selftests/rseq: Fix CID_ID typo in Makefile
selftests:prctl: add set-process-name to .gitignore
selftests:prctl: Fix make clean override warning
selftests/resctrl: Remove test type checks from cat_val()
selftests/resctrl: Pass the real number of tests to show_cache_info()
selftests/resctrl: Move CAT/CMT test global vars to function they are used in
selftests/resctrl: Don't use variable argument list for ->setup()
selftests/resctrl: Don't pass test name to fill_buf
selftests/resctrl: Improve parameter consistency in fill_buf
selftests/resctrl: Remove unnecessary startptr global from fill_buf
selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf()
...
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki).
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang).
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal).
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang).
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies).
- Migrate cpufreq drivers for various platforms to use void remove
callback (Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes in cpufreq (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang,
Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno and Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva).
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson).
- Rework hibernation memory snapshotting to avoid storing pages filled
with zeros in hibernation image files (Brian Geffon).
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin).
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin).
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi).
- Fix memory leak in devfreq_dev_release() (Boris Brezillon).
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam).
- Explicitly include correct DT includes in devfreq (Rob Herring).
- Remove unsued pm_runtime_update_max_time_suspended() extern
declaration (YueHaibing).
- Add turbo-boost support to cpupower (Wyes Karny).
- Add support for amd_pstate mode change to cpupower (Wyes Karny).
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati).
- Clean up OPP code and add new frequency related APIs to it (Viresh
Kumar, Manivannan Sadhasivam).
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon).
-----BEGIN PGP SIGNATURE-----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=6BIh
-----END PGP SIGNATURE-----
Merge tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework cpuidle governors to call tick_nohz_get_sleep_length()
less often and fix one of them, rework hibernation to avoid storing
pages filled with zeros in hibernation images, switch over some
cpufreq drivers to use void remove callbacks, fix and clean up
multiple cpufreq drivers, fix the devfreq core, update the cpupower
utility and make other assorted improvements.
Specifics:
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki)
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang)
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal)
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang)
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies)
- Migrate cpufreq drivers for various platforms to use void remove
callback (Yangtao Li)
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta)
- Explicitly include correct DT includes in cpufreq (Rob Herring)
- Frequency domain updates for qcom-hw driver (Neil Armstrong)
- Modify AMD pstate driver return the highest_perf value (Meng Li)
- Generic cleanups for cppc, mediatek and powernow driver (Liao
Chang, Konrad Dybcio)
- Add more platforms to cpufreq-arm driver's blocklist
(AngeloGioacchino Del Regno and Konrad Dybcio)
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson)
- Rework hibernation memory snapshotting to avoid storing pages
filled with zeros in hibernation image files (Brian Geffon)
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin)
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin)
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi)
- Fix memory leak in devfreq_dev_release() (Boris Brezillon)
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam)
- Explicitly include correct DT includes in devfreq (Rob Herring)
- Remove unsued pm_runtime_update_max_time_suspended() extern
declaration (YueHaibing)
- Add turbo-boost support to cpupower (Wyes Karny)
- Add support for amd_pstate mode change to cpupower (Wyes Karny)
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati)
- Clean up OPP code and add new frequency related APIs to it (Viresh
Kumar, Manivannan Sadhasivam)
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)"
* tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpuidle: teo: Avoid unnecessary variable assignments
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
cpufreq: amd-pstate-ut: Remove module parameter access
cpufreq: Use clamp() helper macro to improve the code readability
PM: sleep: Add helpers to allow a device to remain powered-on
PM: QoS: Add check to make sure CPU latency is non-negative
PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended()
cpufreq: intel_pstate: set stale CPU frequency to minimum
cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
dt-bindings: cpufreq: Convert ti-cpufreq to json schema
dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
OPP: Fix argument name in doc comment
cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
...
CPU features and system registers:
* Advertise hinted conditional branch support (FEAT_HBC) to
userspace
* Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
* Fix macro name typo in SME documentation
Entry code:
* Unmask exceptions earlier on the system call entry path
Memory management:
* Don't bother clearing PTE_RDONLY for dirty ptes in
pte_wrprotect() and pte_modify()
Perf and PMU drivers:
* Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
* Fix hw_breakpoint single-stepping when called from bpf
* Fixes for DDR PMU on i.MX8MP SoC
* Add NUMA-awareness to Hisilicon PCIe PMU driver
* Fix locking dependency issue in Arm DMC620 PMU driver
* Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
* Add support for Arm CMN-700 r3 parts to the CMN PMU driver
* Add support for recent Arm Cortex CPU PMUs
* Update Hisilicon PMU maintainers
Selftests:
* Add a bunch of new features to the hwcap test (JSCVT, PMULL,
AES, SHA1, etc)
* Fix SSVE test to leave streaming-mode after grabbing the
signal context
* Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
* Allow compiler to warn on suspicious looking system register
expressions
* Work around SDEI firmware bug by aborting any running
handlers on a kernel crash
* Fix some harmless warnings when building with W=1
* Remove some unused function declarations
* Other minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmTon4QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG0nCAC9lTqppELnqXPA3FswONhtDBnKEufZHp0+
4+Z6CPjAYZpd7ruiezvxeZA62tZl3eX+tYOx+6lf4xYxFA5W/RQdmxM7e0mGJd+n
sgps85kxArApCgJR9zJiTCAIPXzKH5ObsFWWbcRljI9fiISVDTYn1JFAEx9UERI5
5yr6blYF2H115oD8V2f/0vVObGOAuiqNnzqJIuKL1I8H9xBK0pssrKvuCCN8J2o4
28+PeO7PzwWPiSfnO15bLd/bGuzbMCcexv4/DdjtLZaAanW7crJRVAzOon+URuVx
JXmkzQvXkOgSKnEFwfVRYTsUbtOz2cBafjSujVmjwIBymhbBCZR/
=WqmX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
This pull request prevents some memory-exhaustion false-postitive failures
in scftorture testing.
-----BEGIN PGP SIGNATURE-----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=8rLK
-----END PGP SIGNATURE-----
Merge tag 'scftorture.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull smp_call_function torture-test updates from Paul McKenney:
"This prevents some memory-exhaustion false-postitive failures in
scftorture testing"
* tag 'scftorture.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
scftorture: Add CONFIG_PREEMPT_DYNAMIC=n to NOPREEMPT scenario
scftorture: Pause testing after memory-allocation failure
scftorture: Forgive memory-allocation failure if KASAN
torture: Scale scftorture memory based on number of CPUs
doc.2023.07.14b: Documentation updates.
fixes.2023.08.16a: Miscellaneous fixes, perhaps most notably simplifying
SRCU_NOTIFIER_INIT() as suggested.
rcu-tasks.2023.07.24a: RCU Tasks updates, most notably treating
Tasks RCU callbacks as lazy while still treating synchronous
grace periods as urgent. Also fixes one bug that restores the
ability to apply debug-objects to RCU Tasks and another that
fixes a race condition that could result in false-positive
failures of the boot-time self-test code.
rcuscale.2023.07.14b: RCU-scalability performance-test updates,
most notably adding the ability to measure the RCU-Tasks's
grace-period kthread's CPU consumption. This proved
quite useful for the rcu-tasks.2023.07.24a work.
refscale.2023.07.14b: Reference-acquisition/release performance-test
updates, including a fix for an uninitialized wait_queue_head_t.
torture.2023.08.14a: Miscellaneous torture-test updates.
torturescripts.2023.07.20a: Torture-test scripting updates, including
removal of the non-longer-functional formal-verification scripts,
test builds of individual RCU Tasks flavors, better diagnostics
for loss of connectivity for distributed rcutorture tests,
disabling of reboot loops in qemu/KVM-based rcutorture testing,
and passing of init parameters to rcutorture's init program.
-----BEGIN PGP SIGNATURE-----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=EujZ
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.08.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably simplifying
SRCU_NOTIFIER_INIT() as suggested
- RCU Tasks updates, most notably treating Tasks RCU callbacks as lazy
while still treating synchronous grace periods as urgent. Also fixes
one bug that restores the ability to apply debug-objects to RCU Tasks
and another that fixes a race condition that could result in
false-positive failures of the boot-time self-test code
- RCU-scalability performance-test updates, most notably adding the
ability to measure the RCU-Tasks's grace-period kthread's CPU
consumption. This proved quite useful for the RCU Tasks work
- Reference-acquisition/release performance-test updates, including a
fix for an uninitialized wait_queue_head_t
- Miscellaneous torture-test updates
- Torture-test scripting updates, including removal of the
non-longer-functional formal-verification scripts, test builds of
individual RCU Tasks flavors, better diagnostics for loss of
connectivity for distributed rcutorture tests, disabling of reboot
loops in qemu/KVM-based rcutorture testing, and passing of init
parameters to rcutorture's init program
* tag 'rcu.2023.08.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (64 commits)
rcu: Use WRITE_ONCE() for assignments to ->next for rculist_nulls
rcu: Make the rcu_nocb_poll boot parameter usable via boot config
rcu: Mark __rcu_irq_enter_check_tick() ->rcu_urgent_qs load
srcu,notifier: Remove #ifdefs in favor of SRCU Tiny srcu_usage
rcutorture: Stop right-shifting torture_random() return values
torture: Stop right-shifting torture_random() return values
torture: Move stutter_wait() timeouts to hrtimers
torture: Move torture_shuffle() timeouts to hrtimers
torture: Move torture_onoff() timeouts to hrtimers
torture: Make torture_hrtimeout_*() use TASK_IDLE
torture: Add lock_torture writer_fifo module parameter
torture: Add a kthread-creation callback to _torture_create_kthread()
rcu-tasks: Fix boot-time RCU tasks debug-only deadlock
rcu-tasks: Permit use of debug-objects with RCU Tasks flavors
checkpatch: Complain about unexpected uses of RCU Tasks Trace
torture: Cause mkinitrd.sh to indicate failure on compile errors
torture: Make init program dump command-line arguments
torture: Switch qemu from -nographic to -display none
torture: Add init-program support for loongarch
torture: Avoid torture-test reboot loops
...
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver).
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song).
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn).
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva).
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt).
- Convert nsproxy.count to refcount_t (Elena Reshetova).
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test.
- Fix build failure with gcc-plugins on GCC 14+.
- Fix selftests to respect SKIP for signal-delivery tests.
- Fix CFI warning for paravirt callback prototype.
- Clarify documentation for seq_show_option_n() usage.
-----BEGIN PGP SIGNATURE-----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=9ZWP
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As has become normal, changes are scattered around the tree (either
explicitly maintainer Acked or for trivial stuff that went ignored):
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver)
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song)
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva)
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt)
- Convert nsproxy.count to refcount_t (Elena Reshetova)
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test
- Fix build failure with gcc-plugins on GCC 14+
- Fix selftests to respect SKIP for signal-delivery tests
- Fix CFI warning for paravirt callback prototype
- Clarify documentation for seq_show_option_n() usage"
* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
kallsyms: Change func signature for cleanup_symbol_name()
kallsyms: Fix kallsyms_selftest failure
nsproxy: Convert nsproxy.count to refcount_t
integrity: Annotate struct ima_rule_opt_list with __counted_by
lkdtm: Add FAM_BOUNDS test for __counted_by
Compiler Attributes: counted_by: Adjust name and identifier expansion
um: refactor deprecated strncpy to memcpy
um: vector: refactor deprecated strncpy
alpha: Replace one-element array with flexible-array member
hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
list: Introduce CONFIG_LIST_HARDENED
list_debug: Introduce inline wrappers for debug checks
compiler_types: Introduce the Clang __preserve_most function attribute
gcc-plugins: Rename last_stmt() for GCC 14+
selftests/harness: Actually report SKIP for signal tests
x86/paravirt: Fix tlb_remove_table function callback prototype warning
EISA: Replace all non-returning strlcpy with strscpy
perf: Replace strlcpy with strscpy
um: Remove strlcpy declaration
...
- Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter
Oskolkov). This touches the scheduler and perf but has been Acked by
Peter Zijlstra.
- Fix regression in syscall skipping and restart tracing on arm32.
This touches arch/arm/ but has been Acked by Arnd Bergmann.
-----BEGIN PGP SIGNATURE-----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=DI8R
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter
Oskolkov). This touches the scheduler and perf but has been Acked by
Peter Zijlstra.
- Fix regression in syscall skipping and restart tracing on arm32. This
touches arch/arm/ but has been Acked by Arnd Bergmann.
* tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Add missing kerndoc notations
ARM: ptrace: Restore syscall skipping for tracers
ARM: ptrace: Restore syscall restart tracing
selftests/seccomp: Handle arm32 corner cases better
perf/benchmark: add a new benchmark for seccom_unotify
selftest/seccomp: add a new test for the sync mode of seccomp_user_notify
seccomp: add the synchronous mode for seccomp_unotify
sched: add a few helpers to wake up tasks on the current cpu
sched: add WF_CURRENT_CPU and externise ttwu
seccomp: don't use semaphore and wait_queue together
-----BEGIN PGP SIGNATURE-----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=f9CF
-----END PGP SIGNATURE-----
Merge tag 'filelock-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
- new functionality for F_OFD_GETLK: requesting a type of F_UNLCK will
find info about whatever lock happens to be first in the given range,
regardless of type.
- an OFD lock selftest
- bugfix involving a UAF in a tracepoint
- comment typo fix
* tag 'filelock-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: fix KASAN: use-after-free in trace_event_raw_event_filelock_lock
fs/locks: Fix typo
selftests: add OFD lock tests
fs/locks: F_UNLCK extension for F_OFD_GETLK
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXT2QAKCRCRxhvAZXjc
olkFAQCT4nRkRTpBvbiv4DgvCIy+URqLNfHGxCxdAX1B09o3UwEAyepf1tz7aFpB
wB67V265JFDMWtvQkSx4ORNpAjZ9Kg0=
=Opqi
-----END PGP SIGNATURE-----
Merge tag 'v6.6-fs.proc.uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull procfs fixes from Christian Brauner:
"Mode changes to files under /proc/<pid>/ aren't supported ever since
commit 6d76fa58b0 ("Don't allow chmod() on the /proc/<pid>/ files").
Due to an oversight in commit 1b3044e39a ("procfs: fix pthread
cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
mode changes on /proc/thread-self/comm were accidently allowed.
Similar, mode changes for all files beneath /proc/<pid>/net/ are
blocked but mode changes on /proc/<pid>/net itself were accidently
allowed.
Both issues come down to not using the generic proc_setattr() helper
which blocks all mode changes. This is rectified with this pull
request.
This also removes a strange nolibc test that abused /proc/<pid>/net
for testing mode changes. Using procfs for this test never made a lot
of sense given procfs has special semantics for almost everything
anway.
Both changes are minor user-visible changes. It is however very
unlikely that mode changes on proc/<pid>/net and
/proc/thread-self/comm are something that userspace relies on"
* tag 'v6.6-fs.proc.uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
procfs: block chmod on /proc/thread-self/comm
proc: use generic setattr() for /proc/$PID/net
selftests/nolibc: drop test chmod_net
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXT7QAKCRCRxhvAZXjc
ort3AP0VIK/oJk5skgjpinQrCfvtVz0XOtawuBtn0f1weIfb6AD9Hg1rqOKnQD5z
dkvn3xaEr3gPOVzqU5SvFwVoCM0cMwA=
=24Ha
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.fchmodat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fchmodat2 system call from Christian Brauner:
"This adds the fchmodat2() system call. It is a revised version of the
fchmodat() system call, adding a missing flag argument. Support for
both AT_SYMLINK_NOFOLLOW and AT_EMPTY_PATH are included.
Adding this system call revision has been a longstanding request but
so far has always fallen through the cracks. While the kernel
implementation of fchmodat() does not have a flag argument the libc
provided POSIX-compliant fchmodat(3) version does. Both glibc and musl
have to implement a workaround in order to support AT_SYMLINK_NOFOLLOW
(see [1] and [2]).
The workaround is brittle because it relies not just on O_PATH and
O_NOFOLLOW semantics and procfs magic links but also on our rather
inconsistent symlink semantics.
This gives userspace a proper fchmodat2() system call that libcs can
use to properly implement fchmodat(3) and allows them to get rid of
their hacks. In this case it will immediately benefit them as the
current workaround is already defunct because of aformentioned
inconsistencies.
In addition to AT_SYMLINK_NOFOLLOW, give userspace the ability to use
AT_EMPTY_PATH with fchmodat2(). This is already possible with
fchownat() so there's no reason to not also support it for
fchmodat2().
The implementation is simple and comes with selftests. Implementation
of the system call and wiring up the system call are done as separate
patches even though they could arguably be one patch. But in case
there are merge conflicts from other system call additions it can be
beneficial to have separate patches"
Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=17eca54051ee28ba1ec3f9aed170a62630959143;hb=a492b1e5ef7ab50c6fdd4e4e9879ea5569ab0a6c#l35 [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c?id=718f363bc2067b6487900eddc9180c84e7739f80#n28 [2]
* tag 'v6.6-vfs.fchmodat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: fchmodat2: remove duplicate unneeded defines
fchmodat2: add support for AT_EMPTY_PATH
selftests: Add fchmodat2 selftest
arch: Register fchmodat2, usually as syscall 452
fs: Add fchmodat2()
Non-functional cleanup of a "__user * filename"
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTo6Y0ACgkQJNaLcl1U
h9AnaAf/XiBSnZl2i9wFckPy7bLcR74YrP1sFet5ZAqtpIt+/DvzQlgFAraHJ4tR
ScM2ZyyMwREaFhrHIXKLm8kbaOKeIjIMSxiHREVG9Wibq8d1TwaOHWAcXc9jMsQb
3G23Aizy2h5yD+/VTh8q6aV+fmYZJDfr1tIu8zWva90HcL2fMGvLjVdt24RNejTL
bgCC2GaaGP4pnC3xoBo1hGayvp0PES1BHVeyAXqMVscH+GCplPNJEdSHvU14OBck
1Nfjf5NVkh5G0pvrbG/yblsn1Zm5HRAzCE7gF1OHLFH27ygvp7fGk6TIXXpvw23c
OSvveYee2YLrf4kyndmv88Aq8JVTeA==
=9F/T
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.6
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
Test different variations of single-stepping into interrupts:
- SVC and PGM interrupts;
- Interrupts generated by ISKE;
- Interrupts generated by instructions emulated by KVM;
- Interrupts generated by instructions emulated by userspace.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20230725143857.228626-7-iii@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
[frankja@de.igm.com: s/ASSERT_EQ/TEST_ASSERT_EQ/ because function was
renamed in the selftest printf series]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
If failed to set link1_1 to netns client, we should delete link1_1 in the
cleanup path. But if set link1_1 to netns client successfully, delete
link1_1 will report warning. So it will be safer creating directly the
devices in the target namespaces.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Closes: https://lore.kernel.org/all/ZNyJx1HtXaUzOkNA@Laptop-X1/
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for using NLM_F_REPLACE, _EXCL, _CREATE and _APPEND flags
in requests.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-10-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the 'array-nest' attribute type that is used by several
netlink-raw families.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-9-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move decode_fixed_header into YnlFamily and add a _fixed_header_size
method to allow extack decoding to skip the fixed header.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We use a tempfile for code generation, to avoid wiping the target
file out if the code generator crashes. File contents are copied
from tempfile to actual destination at the end of main().
uAPI generation is relatively simple so when generating the uAPI
header we return from main() early, and never reach the "copy code
over" stage. Since commit under Fixes uAPI headers are not updated
by ynl-gen.
Move the copy/commit of the code into CodeWriter, to make it
easier to call at any point in time. Hook it into the destructor
to make sure we don't miss calling it.
Fixes: f65f305ae0 ("tools: ynl-gen: use temporary file for rendering")
Link: https://lore.kernel.org/r/20230824212431.1683612-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZOjkTAAKCRDbK58LschI
gx32AP9gaaHFBtOYBfoenKTJfMgv1WhtQHIBas+WN9ItmBx9MAEA4gm/VyQ6oD7O
EBjJKJQ2CZ/QKw7cNacXw+l5jF7/+Q0=
=8P7g
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-08-25
We've added 87 non-merge commits during the last 8 day(s) which contain
a total of 104 files changed, 3719 insertions(+), 4212 deletions(-).
The main changes are:
1) Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds,
from Jiri Olsa.
2) Add support BPF cpu v4 instructions for arm64 JIT compiler,
from Xu Kuohai.
3) Add support BPF cpu v4 instructions for riscv64 JIT compiler,
from Pu Lehui.
4) Fix LWT BPF xmit hooks wrt their return values where propagating
the result from skb_do_redirect() would trigger a use-after-free,
from Yan Zhai.
5) Fix a BPF verifier issue related to bpf_kptr_xchg() with local kptr
where the map's value kptr type and locally allocated obj type
mismatch, from Yonghong Song.
6) Fix BPF verifier's check_func_arg_reg_off() function wrt graph
root/node which bypassed reg->off == 0 enforcement,
from Kumar Kartikeya Dwivedi.
7) Lift BPF verifier restriction in networking BPF programs to treat
comparison of packet pointers not as a pointer leak,
from Yafang Shao.
8) Remove unmaintained XDP BPF samples as they are maintained
in xdp-tools repository out of tree, from Toke Høiland-Jørgensen.
9) Batch of fixes for the tracing programs from BPF samples in order
to make them more libbpf-aware, from Daniel T. Lee.
10) Fix a libbpf signedness determination bug in the CO-RE relocation
handling logic, from Andrii Nakryiko.
11) Extend libbpf to support CO-RE kfunc relocations. Also follow-up
fixes for bpf_refcount shared ownership implementation,
both from Dave Marchevsky.
12) Add a new bpf_object__unpin() API function to libbpf,
from Daniel Xu.
13) Fix a memory leak in libbpf to also free btf_vmlinux
when the bpf_object gets closed, from Hao Luo.
14) Small error output improvements to test_bpf module, from Helge Deller.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (87 commits)
selftests/bpf: Add tests for rbtree API interaction in sleepable progs
bpf: Allow bpf_spin_{lock,unlock} in sleepable progs
bpf: Consider non-owning refs to refcounted nodes RCU protected
bpf: Reenable bpf_refcount_acquire
bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes
bpf: Consider non-owning refs trusted
bpf: Ensure kptr_struct_meta is non-NULL for collection insert and refcount_acquire
selftests/bpf: Enable cpu v4 tests for RV64
riscv, bpf: Support unconditional bswap insn
riscv, bpf: Support signed div/mod insns
riscv, bpf: Support 32-bit offset jmp insn
riscv, bpf: Support sign-extension mov insns
riscv, bpf: Support sign-extension load insns
riscv, bpf: Fix missing exception handling and redundant zext for LDX_B/H/W
samples/bpf: Add note to README about the XDP utilities moved to xdp-tools
samples/bpf: Cleanup .gitignore
samples/bpf: Remove the xdp_sample_pkts utility
samples/bpf: Remove the xdp1 and xdp2 utilities
samples/bpf: Remove the xdp_rxq_info utility
samples/bpf: Remove the xdp_redirect* utilities
...
====================
Link: https://lore.kernel.org/r/20230825194319.12727-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge devfreq changes and power management tools changes for 6.6-rc1:
- Fix memory leak in devfreq_dev_release() (Boris Brezillon).
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam).
- Explicitly include correct DT includes in devfreq (Rob Herring).
- Add turbo-boost support to cpupower (Wyes Karny).
- Add support for amd_pstate mode change to cpupower (Wyes Karny).
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati).
* pm-devfreq:
PM / devfreq: Fix leak in devfreq_dev_release()
PM / devfreq: Reword the kernel-doc comment for devfreq_monitor_start() API
PM / devfreq: Explicitly include correct DT includes
* pm-tools:
cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation.
cpupower: Add turbo-boost support in cpupower
cpupower: Add support for amd_pstate mode change
cpupower: Add EPP value change support
cpupower: Add is_valid_path API
cpupower: Recognise amd-pstate active mode driver
cpupower: Bump soname version
or aren't considered suitable for a -stable backport.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZOjuGgAKCRDdBJ7gKXxA
jkLlAQDY9sYxhQZp1PFLirUIPeOBjEyifVy6L6gCfk9j0snLggEA2iK+EtuJt2Dc
SlMfoTq29zyU/YgfKKwZEVKtPJZOHQU=
=oTcj
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4
issues or aren't considered suitable for a -stable backport"
* tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
shmem: fix smaps BUG sleeping while atomic
selftests: cachestat: catch failing fsync test on tmpfs
selftests: cachestat: test for cachestat availability
maple_tree: disable mas_wr_append() when other readers are possible
madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check
madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check
madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check
mm: multi-gen LRU: don't spin during memcg release
mm: memory-failure: fix unexpected return value in soft_offline_page()
radix tree: remove unused variable
mm: add a call to flush_cache_vmap() in vmap_pfn()
selftests/mm: FOLL_LONGTERM need to be updated to 0x100
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
selftests: cgroup: fix test_kmem_basic less than error
mm: enable page walking API to lock vmas during the walk
smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
Confirm that the following sleepable prog states fail verification:
* bpf_rcu_read_unlock before bpf_spin_unlock
* RCU CS will last at least as long as spin_lock CS
Also confirm that correct usage passes verification, specifically:
* Explicit use of bpf_rcu_read_{lock, unlock} in sleepable test prog
* Implied RCU CS due to spin_lock CS
None of the selftest progs actually attach to bpf_testmod's
bpf_testmod_test_read.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230821193311.3290257-8-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that all reported issues are fixed, bpf_refcount_acquire can be
turned back on. Also reenable all bpf_refcount-related tests which were
disabled.
This a revert of:
* commit f3514a5d67 ("selftests/bpf: Disable newly-added 'owner' field test until refcount re-enabled")
* commit 7deca5eae8 ("bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230821193311.3290257-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Explicitly set the exception vector to #UD when potentially injecting an
exception in sync_regs_test's subtests that try to detect TOCTOU bugs
in KVM's handling of exceptions injected by userspace. A side effect of
the original KVM bug was that KVM would clear the vector, but relying on
KVM to clear the vector (i.e. make it #DE) makes it less likely that the
test would ever find *new* KVM bugs, e.g. because only the first iteration
would run with a legal vector to start.
Explicitly inject #UD for race_events_inj_pen() as well, e.g. so that it
doesn't inherit the illegal 255 vector from race_events_exc(), which
currently runs first.
Link: https://lore.kernel.org/r/20230817233430.1416463-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reload known good vCPU state if the vCPU triple faults in any of the
race_sync_regs() subtests, e.g. if KVM successfully injects an exception
(the vCPU isn't configured to handle exceptions). On Intel, the VMCS
is preserved even after shutdown, but AMD's APM states that the VMCB is
undefined after a shutdown and so KVM synthesizes an INIT to sanitize
vCPU/VMCB state, e.g. to guard against running with a garbage VMCB.
The synthetic INIT results in the vCPU never exiting to userspace, as it
gets put into Real Mode at the reset vector, which is full of zeros (as is
GPA 0 and beyond), and so executes ADD for a very, very long time.
Fixes: 60c4063b47 ("KVM: selftests: Extend x86's sync_regs_test to check for event vector races")
Cc: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230817233430.1416463-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Casts were necessary for older versions of libslang, however, these
are now 15 years old and so we no longer need to care about supporting
them. Tidy the casts and remove unnecessary logic.
Move the ENABLE_SLFUTURE_CONST to the libslang.h common include file,
and also enable ENABLE_SLFUTURE_VOID.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Initialize realname to NULL, rather than name.
This avoids a cast and as realpath is either NULL or an allocated
string, free can be called unconditionally.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct pmu id is initialized from pmu_id that is read into allocated
memory from a file, as such it needs free-ing in pmu__delete().
Make the id value const so that we can remove casts in tests.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This avoids casts in tests. Use zfree in a few places to avoid
warnings about a freeing a const pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PMU name could be NULL in the case of the fake_pmu. Initialize the
name for the fake_pmu to "fake" so that all other logic can assume it
is initialized. Add a const to the type of name so that a literal can
be used to avoid additional initialization code. Propagate the cost
through related routines and remove now unnecessary "(char *)"
casts. Doing this located a bug in builtin-list for the pmu_glob that
was missing a strdup.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230825024002.801955-3-irogers@google.com
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PMU caps are written as HEADER_PMU_CAPS or for the special case of the
PMU "cpu" as HEADER_CPU_PMU_CAPS. As the PMU "cpu" is special, and not
any "core" PMU, the logic had become broken and core PMUs not called
"cpu" were not having their caps written.
This affects ARM and s390 non-hybrid PMUs.
Simplify the PMU caps writing logic to scan one fewer time and to be
more explicit in its behavior.
Fixes: 178ddf3bad ("perf header: Avoid hybrid PMU list in write_pmu_caps")
Reported-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* for-next/selftests: (22 commits)
kselftest/arm64: Fix hwcaps selftest build
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
kselftest/arm64: build BTI tests in output directory
kselftest/arm64: fix a memleak in zt_regs_run()
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
kselftest/arm64: add lse and lse2 features to hwcap test
kselftest/arm64: add test item that support to capturing the SIGBUS signal
kselftest/arm64: add DEF_SIGHANDLER_FUNC() and DEF_INST_RAISE_SIG() helpers
kselftest/arm64: add crc32 feature to hwcap test
kselftest/arm64: add float-point feature to hwcap test
kselftest/arm64: Use the tools/include compiler.h rather than our own
kselftest/arm64: Use shared OPTIMZER_HIDE_VAR() definiton
kselftest/arm64: Make the tools/include headers available
tools include: Add some common function attributes
tools compiler.h: Add OPTIMIZER_HIDE_VAR()
kselftest/arm64: Exit streaming mode after collecting signal context
kselftest/arm64: add RCpc load-acquire to hwcap test
...
- Fix ring buffer being permanently disabled due to missed record_disabled()
Changing the trace cpu mask will disable the ring buffers for the CPUs no
longer in the mask. But it fails to update the snapshot buffer. If a snapshot
takes place, the accounting for the ring buffer being disabled is corrupted
and this can lead to the ring buffer being permanently disabled.
- Add test case for snapshot and cpu mask working together
- Fix memleak by the function graph tracer not getting closed properly.
The iterator is used to read the ring buffer. When it opens, it calls
the open function of a tracer, and when it is closed, it calls the close
iteration. While a trace is being read, it is still possible to change
the tracer. If this happens between the function graph tracer and the
wakeup tracer (which uses function graph tracing), the tracers are not
closed properly during when the iterator sees the switch, and the wakeup
function did not initialize its private pointer to NULL, which is used
to know if the function graph tracer was the last tracer. It could be
fooled in thinking it is, but then on exit it does not call the close
function of the function graph tracer to clean up its data.
- Fix synthetic events on big endian machines, by introducing a union
that does the conversions properly.
- Fix synthetic events from printing out the number of elements in the
stacktrace when it shouldn't.
- Fix synthetic events stacktrace to not print a bogus value at the end.
- Introduce a pipe_cpumask that prevents the trace_pipe files from being
opened by more than one task (file descriptor). There was a race found
where if splice is called, the iter->ent could become stale and events
could be missed. There's no point reading a producer/consumer file by
more than one task as they will corrupt each other anyway. Add a cpumask
that keeps track of the per_cpu trace_pipe files as well as the global
trace_pipe file that prevents more than one open of a trace_pipe file
that represents the same ring buffer. This prevents the race from
happening.
- Fix ftrace samples for arm64 to work with older compilers.
-----BEGIN PGP SIGNATURE-----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=CI9f
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix ring buffer being permanently disabled due to missed
record_disabled()
Changing the trace cpu mask will disable the ring buffers for the
CPUs no longer in the mask. But it fails to update the snapshot
buffer. If a snapshot takes place, the accounting for the ring buffer
being disabled is corrupted and this can lead to the ring buffer
being permanently disabled.
- Add test case for snapshot and cpu mask working together
- Fix memleak by the function graph tracer not getting closed properly.
The iterator is used to read the ring buffer. When it opens, it calls
the open function of a tracer, and when it is closed, it calls the
close iteration. While a trace is being read, it is still possible to
change the tracer.
If this happens between the function graph tracer and the wakeup
tracer (which uses function graph tracing), the tracers are not
closed properly during when the iterator sees the switch, and the
wakeup function did not initialize its private pointer to NULL, which
is used to know if the function graph tracer was the last tracer. It
could be fooled in thinking it is, but then on exit it does not call
the close function of the function graph tracer to clean up its data.
- Fix synthetic events on big endian machines, by introducing a union
that does the conversions properly.
- Fix synthetic events from printing out the number of elements in the
stacktrace when it shouldn't.
- Fix synthetic events stacktrace to not print a bogus value at the
end.
- Introduce a pipe_cpumask that prevents the trace_pipe files from
being opened by more than one task (file descriptor).
There was a race found where if splice is called, the iter->ent could
become stale and events could be missed. There's no point reading a
producer/consumer file by more than one task as they will corrupt
each other anyway. Add a cpumask that keeps track of the per_cpu
trace_pipe files as well as the global trace_pipe file that prevents
more than one open of a trace_pipe file that represents the same ring
buffer. This prevents the race from happening.
- Fix ftrace samples for arm64 to work with older compilers.
* tag 'trace-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
samples: ftrace: Replace bti assembly with hint for older compiler
tracing: Introduce pipe_cpumask to avoid race on trace_pipes
tracing: Fix memleak due to race between current_tracer and trace
tracing/synthetic: Allocate one additional element for size
tracing/synthetic: Skip first entry for stack traces
tracing/synthetic: Use union instead of casts
selftests/ftrace: Add a basic testcase for snapshot
tracing: Fix cpu buffers unavailable due to 'record_disabled' missed
Differentiate between empty list and None for member lists.
New families may want to create request responses with no attribute.
If we treat those the same as None we end up rendering
a full parsing policy in user space, instead of an empty one.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230824003056.1436637-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We look for attributes inside do.request, but there's another
layer of nesting in the spec, look inside do.request.attributes.
This bug had no effect as all global policies we generate (fou)
seem to be full, anyway, and we treat full and empty the same.
Next patch will change the treatment of empty policies.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230824003056.1436637-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent changes made us assume that input for binary data is in hex.
When using YNL as a Python library it's possible to pass in raw bytes.
Bring the ability to do that back.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230824003056.1436637-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove comparing pointer to 0 to avoid this warning from coccinelle:
./tools/testing/selftests/mm/map_populate.c:80:16-17: WARNING comparing pointer to 0, suggest !E
./tools/testing/selftests/mm/map_populate.c:80:16-17: WARNING comparing pointer to 0
Link: https://lkml.kernel.org/r/20230817160033.90079-1-tuananhlfc@gmail.com
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, not all kernel memory usage is being accounted for. This
commit switches to using the kernel entry within memory.stat which
already includes kernel_stack, pagetables, and slab. The kernel entry
also includes vmalloc and other additional kernel memory use cases which
were missing.
Link: https://lkml.kernel.org/r/bvrhe2tpsts2azaroq4ubp2slawmop6orndsswrewuscw3ugvk@kmemmrttsnc7
Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "New page table range API", v6.
This patchset changes the API used by the MM to set up page table entries.
The four APIs are:
set_ptes(mm, addr, ptep, pte, nr)
update_mmu_cache_range(vma, addr, ptep, nr)
flush_dcache_folio(folio)
flush_icache_pages(vma, page, nr)
flush_dcache_folio() isn't technically new, but no architecture
implemented it, so I've done that for them. The old APIs remain around
but are mostly implemented by calling the new interfaces.
The new APIs are based around setting up N page table entries at once.
The N entries belong to the same PMD, the same folio and the same VMA, so
ptep++ is a legitimate operation, and locking is taken care of for you.
Some architectures can do a better job of it than just a loop, but I have
hesitated to make too deep a change to architectures I don't understand
well.
One thing I have changed in every architecture is that PG_arch_1 is now a
per-folio bit instead of a per-page bit when used for dcache clean/dirty
tracking. This was something that would have to happen eventually, and it
makes sense to do it now rather than iterate over every page involved in a
cache flush and figure out if it needs to happen.
The point of all this is better performance, and Fengwei Yin has measured
improvement on x86. I suspect you'll see improvement on your architecture
too. Try the new will-it-scale test mentioned here:
https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/
You'll need to run it on an XFS filesystem and have
CONFIG_TRANSPARENT_HUGEPAGE set.
This patchset is the basis for much of the anonymous large folio work
being done by Ryan, so it's received quite a lot of testing over the last
few months.
This patch (of 38):
Determine if a value lies within a range more efficiently (subtraction +
comparison vs two comparisons and an AND). It also has useful (under some
circumstances) behaviour if the range exceeds the maximum value of the
type. Convert all the conflicting definitions of in_range() within the
kernel; some can use the generic definition while others need their own
definition.
Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unit with the PMU name is appended to desc in jevents.py, but on
hybrid platforms it causes the desc to differ from the regular
non-hybrid system with a PMU of 'cpu'. Having differing descs means
the events don't deduplicate. To make the perf list output not differ,
append the Unit on again in the perf list printing code.
On x86 reduces the binary size by 409,600 bytes or about 4%. Update
pmu-events test expectations to match the differently generated
pmu-events.c code.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824183212.374787-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cachestat kselftest runs a test on a normal file, which is created
temporarily in the current directory. Among the tests it runs there is a
call to fsync(), which is expected to clean all dirty pages used by the
file.
However the tmpfs filesystem implements fsync() as noop_fsync(), so the
call will not even attempt to clean anything when this test file happens
to live on a tmpfs instance. This happens in an initramfs, or when the
current directory is in /dev/shm or sometimes /tmp.
To avoid this test failing wrongly, use statfs() to check which filesystem
the test file lives on. If that is "tmpfs", we skip the fsync() test.
Since the fsync test is only one part of the "normal file" test, we now
execute this twice, skipping the fsync part on the first call. This way
only the second test, including the fsync part, would be skipped.
Link: https://lkml.kernel.org/r/20230821160534.3414911-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: cachestat: fix run on older kernels", v2.
I ran all kernel selftests on some test machine, and stumbled upon
cachestat failing (among others). These patches fix the run on older
kernels and when the current directory is on a tmpfs instance.
This patch (of 2):
As cachestat is a new syscall, it won't be available on older kernels, for
instance those running on a development machine. At the moment the test
reports all tests as "not ok" in this case.
Test for the cachestat syscall availability first, before doing further
tests, and bail out early with a TAP SKIP comment.
This also uses the opportunity to add the proper TAP headers, and add one
check for proper error handling (illegal file descriptor).
Link: https://lkml.kernel.org/r/20230821160534.3414911-1-andre.przywara@arm.com
Link: https://lkml.kernel.org/r/20230821160534.3414911-2-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All required libraries have been imported and make sure that none of
them are external dependencies. To achieve this, created a virt env and
verified.
Modified usage information and added combined command.
Modified the main() function to read the --save-only command-line option
and set the output_file variable accordingly.
Modified the trace_end() function to check for the output_file variable.
If it is set, the profiler data is saved to a local file in Gecko
Profile format, or the profiler.firefox.com is opened on the default
browser.
Included trace_begin() to initialize the Firefox Profiler and launch the
default browser to display the profiler.firefox.com.
Added a new function launchFirefox() to start a local server and launch
the profiler UI on the default browser with the appropriate URL.
Created the "CORSRequestHandler" class to enable Cross-Origin Resource
Sharing.
Summary:
This integration now includes a exiting feature to conveniently host the
Gecko Profile data on a local server and open it directly in the default
web browser.
This means that users can now effortlessly visualize and analyze the
profiler results with just a single click.
The addition of the --save-only command-line option allows users to save
the profiler output to a local file in Gecko Profile format, but the
real highlight lies in the capability to seamlessly launch a local
server, making the data accessible to Firefox Profiler via a web
browser.
In addition, it's important to highlight that all data are hosted
locally, eliminating any concerns about data privacy rules and
regulations.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZNOS0vo58DnVLpD8@yoga
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refines the argument handling mechanism in the "gecko-report" script to
enable better compatibility and improved user experience.
The script now differentiates between scenarios where arguments are
provided for record and report cases where gecko.py arguments are
passed.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZNf7W+EIrrCSHZN0@yoga
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ricardo Cañuelo