commit 1f5e7eb786 upstream.
Tony reported intermittent lockups on poweroff. His analysis identified the
wbinvd() in stop_this_cpu() as the culprit. This was added to ensure that
on SME enabled machines a kexec() does not leave any stale data in the
caches when switching from encrypted to non-encrypted mode or vice versa.
That wbinvd() is conditional on the SME feature bit which is read directly
from CPUID. But that readout does not check whether the CPUID leaf is
available or not. If it's not available the CPU will return the value of
the highest supported leaf instead. Depending on the content the "SME" bit
might be set or not.
That's incorrect but harmless. Making the CPUID readout conditional makes
the observed hangs go away, but it does not fix the underlying problem:
CPU0 CPU1
stop_other_cpus()
send_IPIs(REBOOT); stop_this_cpu()
while (num_online_cpus() > 1); set_online(false);
proceed... -> hang
wbinvd()
WBINVD is an expensive operation and if multiple CPUs issue it at the same
time the resulting delays are even larger.
But CPU0 already observed num_online_cpus() going down to 1 and proceeds
which causes the system to hang.
This issue exists independent of WBINVD, but the delays caused by WBINVD
make it more prominent.
Make this more robust by adding a cpumask which is initialized to the
online CPU mask before sending the IPIs and CPUs clear their bit in
stop_this_cpu() after the WBINVD completed. Check for that cpumask to
become empty in stop_other_cpus() instead of watching num_online_cpus().
The cpumask cannot plug all holes either, but it's better than a raw
counter and allows to restrict the NMI fallback IPI to be sent only the
CPUs which have not reported within the timeout window.
Fixes: 08f253ec37 ("x86/cpu: Clear SME feature flag when not in use")
Reported-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/3817d810-e0f1-8ef8-0bbd-663b919ca49b@cybernetics.com
Link: https://lore.kernel.org/r/87h6r770bv.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a32b0f0db3 upstream.
Do the same as early loading - load on both threads.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230605141332.25948-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c26bd4384 upstream,
If mas_store_gfp() in the gather loop failed, the 'error' variable that
ultimately gets returned was not being set. In many cases, its original
value of -ENOMEM was still in place, and that was fine. But if VMAs had
been split at the start or end of the range, then 'error' could be zero.
Change to the 'error = foo(); if (error) goto â¦' idiom to fix the bug.
Also clean up a later case which avoided the same bug by *explicitly*
setting error = -ENOMEM right before calling the function that might
return -ENOMEM.
In a final cosmetic change, move the 'Point of no return' comment to
*after* the goto. That's been in the wrong place since the preallocation
was removed, and this new error path was added.
Fixes: 606c812eb1 ("mm/mmap: Fix error path in do_vmi_align_munmap()")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 606c812eb1 upstream.
The error unrolling was leaving the VMAs detached in many cases and
leaving the locked_vm statistic altered, and skipping the unrolling
entirely in the case of the vma tree write failing.
Fix the error path by re-attaching the detached VMAs and adding the
necessary goto for the failed vma tree write, and fix the locked_vm
statistic by only updating after the vma tree write succeeds.
Fixes: 763ecb0350 ("mm: remove the vma linked list")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ dwmw2: Strictly, the original patch wasn't *re-attaching* the
detached VMAs. They *were* still attached but just had
the 'detached' flag set, which is an optimisation. Which
doesn't exist in 6.3, so drop that. Also drop the call
to vma_start_write() which came in with the per-VMA
locking in 6.4. ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fe55c2799 upstream.
last component point filename struct. Currently putname is called after
vfs_path_parent_lookup(). And then last component is used for
lookup_one_qstr_excl(). name in last component is freed by previous
calling putname(). And It cause file lookup failure when testing
generic/464 test of xfstest.
Fixes: 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df14afeed2 upstream.
There is a case that file_present is true and path is uninitialized.
This patch change file_present is set to false by default and set to
true when patch is initialized.
Fixes: 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48b47f0caa upstream.
Uninitialized rd.delegated_inode can be used in vfs_rename().
Fix this by setting rd.delegated_inode to NULL to avoid the uninitialized
read.
Fixes: 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1caa71a7a6 upstream.
When reworking the vgic locking, the vgic distributor registration
got simplified, which was a very good cleanup. But just a tad too
radical, as we now register the *native* vgic only, ignoring the
GICv2-on-GICv3 that allows pre-historic VMs (or so I thought)
to run.
As it turns out, QEMU still defaults to GICv2 in some cases, and
this breaks Nathan's setup!
Fix it by propagating the *requested* vgic type rather than the
host's version.
Fixes: 59112e9c39 ("KVM: arm64: vgic: Fix a circular locking issue")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
link: https://lore.kernel.org/r/20230606221525.GA2269598@dev-arch.thelio-3990X
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 043d2acf57 upstream.
Otherwise the module reference counter is leaked.
Fixes b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e69b9bc170 ]
Claim clkhi and clklo as integer type to avoid possible calculation
errors caused by data overflow.
Fixes: a55fa9d0e4 ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d38d5810 ]
When booting with "intremap=off" and "x2apic_phys" on the kernel command
line, the physical x2APIC driver ends up being used even when x2APIC
mode is disabled ("intremap=off" disables x2APIC mode). This happens
because the first compound condition check in x2apic_phys_probe() is
false due to x2apic_mode == 0 and so the following one returns true
after default_acpi_madt_oem_check() having already selected the physical
x2APIC driver.
This results in the following panic:
kernel BUG at arch/x86/kernel/apic/io_apic.c:2409!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc2-ver4.1rc2 #2
Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021
RIP: 0010:setup_IO_APIC+0x9c/0xaf0
Call Trace:
<TASK>
? native_read_msr
apic_intr_mode_init
x86_late_time_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
secondary_startup_64_no_verify
</TASK>
which is:
setup_IO_APIC:
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
for_each_ioapic(ioapic)
BUG_ON(mp_irqdomain_create(ioapic));
Return 0 to denote that x2APIC has not been enabled when probing the
physical x2APIC driver.
[ bp: Massage commit message heavily. ]
Fixes: 9ebd680bd0 ("x86, apic: Use probe routines to simplify apic selection")
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230616212236.1389-1-dheerajkumar.srivastava@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9f174c811 ]
Commits ffb1b4a410 ("x86/unwind/orc: Add 'signal' field to ORC
metadata") and fb799447ae ("x86,objtool: Split UNWIND_HINT_EMPTY in
two") changed the ORC format. Although ORC is internal to the kernel,
it's the only way for external tools to get reliable kernel stack traces
on x86-64. In particular, the drgn debugger [1] uses ORC for stack
unwinding, and these format changes broke it [2]. As the drgn
maintainer, I don't care how often or how much the kernel changes the
ORC format as long as I have a way to detect the change.
It suffices to store a version identifier in the vmlinux and kernel
module ELF files (to use when parsing ORC sections from ELF), and in
kernel memory (to use when parsing ORC from a core dump+symbol table).
Rather than hard-coding a version number that needs to be manually
bumped, Peterz suggested hashing the definitions from orc_types.h. If
there is a format change that isn't caught by this, the hashing script
can be updated.
This patch adds an .orc_header allocated ELF section containing the
20-byte hash to vmlinux and kernel modules, along with the corresponding
__start_orc_header and __stop_orc_header symbols in vmlinux.
1: https://github.com/osandov/drgn
2: https://github.com/osandov/drgn/issues/303
Fixes: ffb1b4a410 ("x86/unwind/orc: Add 'signal' field to ORC metadata")
Fixes: fb799447ae ("x86,objtool: Split UNWIND_HINT_EMPTY in two")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lkml.kernel.org/r/aef9c8dc43915b886a8c48509a12ec1b006ca1ca.1686690801.git.osandov@osandov.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f5d2e3bab ]
Fix possible virtqueue used buffers leak and corresponding stuck
in case of temporary -EIO from sendmsg() which is produced by
tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx
to pass packet data (that is update used_idx in corresponding
vhost_zerocopy_signal_used()) as if packet data has been
transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN
in case of fake successful transmit.
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Message-Id: <20230424204411.24888-1-asmetanin@yandex-team.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 376daf3177 ]
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs
know about the features that have been negotiated. This allows vhost
to more safely make decisions based on the features, such as when using
PACKED vs split queues.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230424225031.18947-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 982b173a6c ]
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48bfd02569 ]
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a05955980 ]
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a672d500b ]
Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so
that operating systems can rely on the flag being correctly set.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1acfc6e753 ]
With IC_INTR_RX_FULL slave interrupt handler reads data in a loop until
RX FIFO is empty. When testing with the slave-eeprom, each transaction
has 2 bytes for address/index and 1 byte for value, the address byte
can be written as data byte due to dropping STOP condition.
In the test below, the master continuously writes to the slave, first 2
bytes are index, 3rd byte is value and follow by a STOP condition.
i2c_write: i2c-3 #0 a=04b f=0000 l=3 [00-D1-D1]
i2c_write: i2c-3 #0 a=04b f=0000 l=3 [00-D2-D2]
i2c_write: i2c-3 #0 a=04b f=0000 l=3 [00-D3-D3]
Upon receiving STOP condition slave eeprom would reset `idx_write_cnt` so
next 2 bytes can be treated as buffer index for upcoming transaction.
Supposedly the slave eeprom buffer would be written as
EEPROM[0x00D1] = 0xD1
EEPROM[0x00D2] = 0xD2
EEPROM[0x00D3] = 0xD3
When CPU load is high the slave irq handler may not read fast enough,
the interrupt status can be seen as 0x204 with both DW_IC_INTR_STOP_DET
(0x200) and DW_IC_INTR_RX_FULL (0x4) bits. The slave device may see
the transactions below.
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1794 : INTR_STAT=0x204
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x1790 : INTR_STAT=0x200
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
After `D1` is received, read loop continues to read `00` which is the
first bype of next index. Since STOP condition is ignored by the loop,
eeprom buffer index increased to `D2` and `00` is written as value.
So the slave eeprom buffer becomes
EEPROM[0x00D1] = 0xD1
EEPROM[0x00D2] = 0x00
EEPROM[0x00D3] = 0xD3
The fix is to use `FIRST_DATA_BYTE` (bit 11) in `IC_DATA_CMD` to split
the transactions. The first index byte in this case would have bit 11
set. Check this indication to inject I2C_SLAVE_WRITE_REQUESTED event
which will reset `idx_write_cnt` in slave eeprom.
Signed-off-by: David Zheng <david.zheng@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ebfd881ab ]
Rather than casting pci1xxxx_i2c_shutdown to an incompatible function type,
update the type to match that expected by __devm_add_action.
Reported by clang-16 with W-1:
.../i2c-mchp-pci1xxxx.c:1159:29: error: cast from 'void (*)(struct pci1xxxx_i2c *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
ret = devm_add_action(dev, (void (*)(void *))pci1xxxx_i2c_shutdown, i2c);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device.h:251:29: note: expanded from macro 'devm_add_action'
__devm_add_action(release, action, data, #action)
^~~~~~
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Tharun Kumar P<tharunkumar.pasumarthi@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cde87b007 ]
This patch fixes the following sparse warning:
net/sched/sch_api.c:2305:1: sparse: warning: symbol 'tc_skip_wrapper' was not declared. Should it be static?
No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32cf0046a6 ]
There's an issue on SAI synchronous mode that TX/RX side can't get BCLK
from RX/TX it sync with if BYP bit is asserted. It's a workaround to
fix it that enable SION of IOMUX pad control and assert BCI.
For example if TX sync with RX which means both TX and RX are using clk
form RX and BYP=1. TX can get BCLK only if the following two conditions
are valid:
1. SION of RX BCLK IOMUX pad is set to 1
2. BCI of TX is set to 1
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03c5c83b70 ]
Avoid linker error for randomly generated config file that
has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar
to riscv, x86 and also to commit 4bf3ec384e ("s390: disable
branch profiling for vdso").
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa58cc888d ]
When a direct I/O write is performed, iomap_dio_rw() invalidates the
part of the page cache which the write is going to before carrying out
the write. In the odd case, the direct I/O write will be reading from
the same page it is writing to. gfs2 carries out writes with page
faults disabled, so it should have been obvious that this page
invalidation can cause iomap_dio_rw() to never make any progress.
Currently, gfs2 will end up in an endless retry loop in
gfs2_file_direct_write() instead, though.
Break this endless loop by limiting the number of retries and falling
back to buffered I/O after that.
Also simplify should_fault_in_pages() sightly and add a comment to make
the above case easier to understand.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e384dba03e ]
Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the
DMI table, so that active-high jack-detect will work properly on
these laptops.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb109fba72 ]
When int3472 is loaded before GPIO driver, acpi_get_and_request_gpiod()
failed but the returned gpio descriptor is not NULL, it will cause panic
in later gpiod_put(), so set the gpio_desc to NULL in register error
handling to avoid such crash.
Signed-off-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Link: https://lore.kernel.org/r/20230524035135.90315-1-bingbu.cao@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8938f75a5e ]
In the error path, a of_node_put() for platform is missing.
Just add it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230523151223.109551-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d7c2f9272 ]
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523165414.14560-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9728fb3ce1 ]
When all bits of IER are set to 0, we still can observe the lpspi irq events
when using DMA mode to transfer data.
So disable irq to avoid the too much irq events.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20230505063557.3962220-1-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89c0c62e94 ]
Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16bd455d08 ]
The WCD938x audio codec Soundwire interface part is not a DAI and does
not allow sound-dai-cells:
sc7280-herobrine-crd.dtb: codec@0,4: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220095401.64196-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca8fc68148 ]
The WCD938x audio codec Soundwire interface part is not a DAI and does
not allow sound-dai-cells:
sc7280-idp.dtb: codec@0,4: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220095401.64196-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a99a291d ]
Some devices have a wrong entry in their button array which points to
a GPIO which is required in another driver, so soc_button_array must
not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L,
where the PNP0C40 home button entry points to a GPIO which is not
a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which
should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L
to this new DMI quirk table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7275ce6a5 ]
Upon keep alive completion, nvme_keep_alive_work is scheduled with the
same delay every time. If keep alive commands are completing slowly,
this may cause a keep alive timeout. The following trace illustrates the
issue, taking KATO = 8 and TBKAS off for simplicity:
1. t = 0: run nvme_keep_alive_work, send keep alive
2. t = ε: keep alive reaches controller, controller restarts its keep
alive timer
3. t = 4: host receives keep alive completion, schedules
nvme_keep_alive_work with delay 4
4. t = 8: run nvme_keep_alive_work, send keep alive
Here, a keep alive having RTT of 4 causes a delay of at least 8 - ε
between the controller receiving successive keep alives. With ε small,
the controller is likely to detect a keep alive timeout.
Fix this by calculating the RTT of the keep alive command, and adjusting
the scheduling delay of the next keep alive work accordingly.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 774a963651 ]
When a command completes, we set a flag which will skip sending a
keep alive at the next run of nvme_keep_alive_work when TBKAS is on.
However, if the command was submitted long ago, it's possible that
the controller may have also restarted its keep alive timer (as a
result of receiving the command) long ago. The following trace
demonstrates the issue, assuming TBKAS is on and KATO = 8 for
simplicity:
1. t = 0: submit I/O commands A, B, C, D, E
2. t = 0.5: commands A, B, C, D, E reach controller, restart its keep
alive timer
3. t = 1: A completes
4. t = 2: run nvme_keep_alive_work, see recent completion, do nothing
5. t = 3: B completes
6. t = 4: run nvme_keep_alive_work, see recent completion, do nothing
7. t = 5: C completes
8. t = 6: run nvme_keep_alive_work, see recent completion, do nothing
9. t = 7: D completes
10. t = 8: run nvme_keep_alive_work, see recent completion, do nothing
11. t = 9: E completes
At this point, 8.5 seconds have passed without restarting the
controller's keep alive timer, so the controller will detect a keep
alive timeout.
Fix this by checking the IO start time when deciding to defer sending a
keep alive command. Only set comp_seen if the command started after the
most recent run of nvme_keep_alive_work. With this change, the
completions of B, C, and D will not set comp_seen and the run of
nvme_keep_alive_work at t = 4 will send a keep alive.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea4d453b9e ]
With TBKAS on, the completion of one command can defer sending a
keep alive for up to twice the delay between successive runs of
nvme_keep_alive_work. The current delay of KATO / 2 thus makes it
possible for one command to defer sending a keep alive for up to
KATO, which can result in the controller detecting a KATO. The following
trace demonstrates the issue, taking KATO = 8 for simplicity:
1. t = 0: run nvme_keep_alive_work, no keep-alive sent
2. t = ε: I/O completion seen, set comp_seen = true
3. t = 4: run nvme_keep_alive_work, see comp_seen == true,
skip sending keep-alive, set comp_seen = false
4. t = 8: run nvme_keep_alive_work, see comp_seen == false,
send a keep-alive command.
Here, there is a delay of 8 - ε between receiving a command completion
and sending the next command. With ε small, the controller is likely to
detect a keep alive timeout.
Fix this by running nvme_keep_alive_work with a delay of KATO / 4
whenever TBKAS is on. Going through the above trace now gives us a
worst-case delay of 4 - ε, which is in line with the recommendation of
sending a command every KATO / 2 in the NVMe specification.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31a5978243 ]
In the function nvme_passthru_end(), only the value of the command
opcode is checked, without checking the command type (IO command or
Admin command). When we send a Dataset Management command (The opcode
of the Dataset Management command is the same as the Set Feature
command), kernel thinks it is a set feature command, then sets the
controller's keep alive interval, and calls nvme_keep_alive_work().
Signed-off-by: min15.li <min15.li@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 016da9c65f ]
The "udc" pointer was never set in the probe() function so it will
lead to a NULL dereference in udc_pci_remove() when we do:
usb_del_gadget_udc(&udc->gadget);
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZG+A/dNpFWAlCChk@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fd9f4232d ]
This fixes the following warning reported by gcc 10.2.1 under x86_64:
../fs/btrfs/tree-log.c: In function ‘btrfs_log_inode’:
../fs/btrfs/tree-log.c:6211:9: error: ‘last_range_start’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
6211 | ret = insert_dir_log_key(trans, log, path, key.objectid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
6212 | first_dir_index, last_dir_index);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/btrfs/tree-log.c:6161:6: note: ‘last_range_start’ was declared here
6161 | u64 last_range_start;
| ^~~~~~~~~~~~~~~~
This might be a false positive fixed in later compiler versions but we
want to have it fixed.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b9e46aa07 ]
This patch fixes the error checking in nfcsim.c.
The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73af6c7511 ]
When a message was received the last_initiator is set to 0xff.
This will force the signal free time for the next transmit
to that for a new initiator. However, if a new transmit is
already in progress, then don't set last_initiator, since
that's the initiator of the current transmit. Overwriting
this would cause the signal free time of a following transmit
to be that of the new initiator instead of a next transmit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe4526d99e ]
Explicitly disable the CEC adapter in cec_devnode_unregister()
Usually this does not really do anything important, but for drivers
that use the CEC pin framework this is needed to properly stop the
hrtimer. Without this a crash would happen when such a driver is
unloaded with rmmod.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b535cc796a ]
If plen is null when passed in, we only checked for null
in one of the two places where it could be used. Although
plen is always valid (not null) for current callers of the
SMB2_change_notify function, this change makes it more consistent.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/202305251831.3V1gbbFs-lkp@intel.com/
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>