Commit graph

714 commits

Author SHA1 Message Date
Linus Torvalds
a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Jonathan Haws
68e34f4e89 ipc/mqueue.c: have RT tasks queue in by priority in wq_add()
Previous behavior added tasks to the work queue using the static_prio
value instead of the dynamic priority value in prio.  This caused RT tasks
to be added to the work queue in a FIFO manner rather than by priority.
Normal tasks were handled by priority.

This fix utilizes the dynamic priority of the task to ensure that both RT
and normal tasks are added to the work queue in priority order.  Utilizing
the dynamic priority (prio) rather than the base priority (normal_prio)
was chosen to ensure that if a task had a boosted priority when it was
added to the work queue, it would be woken sooner to to ensure that it
releases any other locks it may be holding in a more timely manner.  It is
understood that the task could have a lower priority when it wakes than
when it was added to the queue in this (unlikely) case.

Link: http://lkml.kernel.org/r/1513006652-7014-1-git-send-email-jhaws@sdl.usu.edu
Signed-off-by: Jonathan Haws <jhaws@sdl.usu.edu>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Philippe Mikoyan
87ad4b0d85 ipc: fix ipc data structures inconsistency
As described in the title, this patch fixes <ipc>id_ds inconsistency when
<ipc>ctl_stat executes concurrently with some ds-changing function, e.g.
shmat, msgsnd or whatever.

For instance, if shmctl(IPC_STAT) is running concurrently
with shmat, following data structure can be returned:
{... shm_lpid = 0, shm_nattch = 1, ...}

Link: http://lkml.kernel.org/r/20171202153456.6514-1-philippe.mikoyan@skat.systems
Signed-off-by: Philippe Mikoyan <philippe.mikoyan@skat.systems>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Linus Torvalds
8b0fdf631c Merge branch 'work.mqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mqueue/bpf vfs cleanups from Al Viro:
 "mqueue and bpf go through rather painful and similar contortions to
  create objects in their dentry trees. Provide a primitive for doing
  that without abusing ->mknod(), switch bpf and mqueue to it.

  Another mqueue-related thing that has ended up in that branch is
  on-demand creation of internal mount (based upon the work of Giuseppe
  Scrivano)"

* 'work.mqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  mqueue: switch to on-demand creation of internal mount
  tidy do_mq_open() up a bit
  mqueue: clean prepare_open() up
  do_mq_open(): move all work prior to dentry_open() into a helper
  mqueue: fold mq_attr_ok() into mqueue_get_inode()
  move dentry_open() calls up into do_mq_open()
  mqueue: switch to vfs_mkobj(), quit abusing ->d_fsdata
  bpf_obj_do_pin(): switch to vfs_mkobj(), quit abusing ->mknod()
  new primitive: vfs_mkobj()
2018-01-30 18:32:21 -08:00
Linus Torvalds
168fe32a07 Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
 "This introduces a __bitwise type for POLL### bitmap, and propagates
  the annotations through the tree. Most of that stuff is as simple as
  'make ->poll() instances return __poll_t and do the same to local
  variables used to hold the future return value'.

  Some of the obvious brainos found in process are fixed (e.g. POLLIN
  misspelled as POLL_IN). At that point the amount of sparse warnings is
  low and most of them are for genuine bugs - e.g. ->poll() instance
  deciding to return -EINVAL instead of a bitmap. I hadn't touched those
  in this series - it's large enough as it is.

  Another problem it has caught was eventpoll() ABI mess; select.c and
  eventpoll.c assumed that corresponding POLL### and EPOLL### were
  equal. That's true for some, but not all of them - EPOLL### are
  arch-independent, but POLL### are not.

  The last commit in this series separates userland POLL### values from
  the (now arch-independent) kernel-side ones, converting between them
  in the few places where they are copied to/from userland. AFAICS, this
  is the least disruptive fix preserving poll(2) ABI and making epoll()
  work on all architectures.

  As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
  it will trigger only on what would've triggered EPOLLWRBAND on other
  architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
  at all on sparc. With this patch they should work consistently on all
  architectures"

* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  make kernel-side POLL... arch-independent
  eventpoll: no need to mask the result of epi_item_poll() again
  eventpoll: constify struct epoll_event pointers
  debugging printk in sg_poll() uses %x to print POLL... bitmap
  annotate poll(2) guts
  9p: untangle ->poll() mess
  ->si_band gets POLL... bitmap stored into a user-visible long field
  ring_buffer_poll_wait() return value used as return value of ->poll()
  the rest of drivers/*: annotate ->poll() instances
  media: annotate ->poll() instances
  fs: annotate ->poll() instances
  ipc, kernel, mm: annotate ->poll() instances
  net: annotate ->poll() instances
  apparmor: annotate ->poll() instances
  tomoyo: annotate ->poll() instances
  sound: annotate ->poll() instances
  acpi: annotate ->poll() instances
  crypto: annotate ->poll() instances
  block: annotate ->poll() instances
  x86: annotate ->poll() instances
  ...
2018-01-30 17:58:07 -08:00
Eric W. Biederman
faf1f22b61 signal: Ensure generic siginfos the kernel sends have all bits initialized
Call clear_siginfo to ensure stack allocated siginfos are fully
initialized before being passed to the signal sending functions.

This ensures that if there is the kind of confusion documented by
TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized
data to userspace when the kernel generates a signal with SI_USER but
the copy to userspace assumes it is a different kind of signal, and
different fields are initialized.

This also prepares the way for turning copy_siginfo_to_user
into a copy_to_user, by removing the need in many cases to perform
a field by field copy simply to skip the uninitialized fields.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-12 14:21:07 -06:00
Al Viro
36735a6a2b mqueue: switch to on-demand creation of internal mount
Instead of doing that upon each ipcns creation, we do that the first
time mq_open(2) or mqueue mount is done in an ipcns.  What's more,
doing that allows to get rid of mount_ns() use - we can go with
considerably cheaper mount_nodev(), avoiding the loop over all
mqueue superblock instances; ipcns->mq_mnt is used to locate preexisting
instance in O(1) time instead of O(instances) mount_ns() would've
cost us.

Based upon the version by Giuseppe Scrivano <gscrivan@redhat.com>; I've
added handling of userland mqueue mounts (original had been broken in
that area) and added a switch to mount_nodev().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05 11:54:37 -05:00
Al Viro
a713fd7f52 tidy do_mq_open() up a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05 11:54:36 -05:00
Al Viro
9b20d7fc52 mqueue: clean prepare_open() up
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05 11:54:36 -05:00
Al Viro
066cc813e9 do_mq_open(): move all work prior to dentry_open() into a helper
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05 11:54:35 -05:00
Al Viro
05c1b29038 mqueue: fold mq_attr_ok() into mqueue_get_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05 11:54:35 -05:00
Al Viro
af4a5372e4 move dentry_open() calls up into do_mq_open()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05 11:54:34 -05:00
Al Viro
eecec19d9e mqueue: switch to vfs_mkobj(), quit abusing ->d_fsdata
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05 11:54:33 -05:00
Al Viro
9dd957485d ipc, kernel, mm: annotate ->poll() instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27 16:20:05 -05:00
Linus Torvalds
1751e8a6cb Rename superblock flags (MS_xyz -> SB_xyz)
This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

    # places to look in; re security/*: it generally should *not* be
    # touched (that stuff parses mount(2) arguments directly), but
    # there are two places where we really deal with superblock flags.
    FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
            include/linux/fs.h include/uapi/linux/bfs_fs.h \
            security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
    # the list of MS_... constants
    SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
          DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
          POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
          I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
          ACTIVE NOUSER"

    SED_PROG=
    for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

    # we want files that contain at least one of MS_...,
    # with fs/namespace.c and fs/pnode.c excluded.
    L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

    for f in $L; do sed -i $f $SED_PROG; done

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Linus Torvalds
fa7f578076 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - a bit more MM

 - procfs updates

 - dynamic-debug fixes

 - lib/ updates

 - checkpatch

 - epoll

 - nilfs2

 - signals

 - rapidio

 - PID management cleanup and optimization

 - kcov updates

 - sysvipc updates

 - quite a few misc things all over the place

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
  EXPERT Kconfig menu: fix broken EXPERT menu
  include/asm-generic/topology.h: remove unused parent_node() macro
  arch/tile/include/asm/topology.h: remove unused parent_node() macro
  arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro
  arch/sh/include/asm/topology.h: remove unused parent_node() macro
  arch/ia64/include/asm/topology.h: remove unused parent_node() macro
  drivers/pcmcia/sa1111_badge4.c: avoid unused function warning
  mm: add infrastructure for get_user_pages_fast() benchmarking
  sysvipc: make get_maxid O(1) again
  sysvipc: properly name ipc_addid() limit parameter
  sysvipc: duplicate lock comments wrt ipc_addid()
  sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE
  initramfs: use time64_t timestamps
  drivers/watchdog: make use of devm_register_reboot_notifier()
  kernel/reboot.c: add devm_register_reboot_notifier()
  kcov: update documentation
  Makefile: support flag -fsanitizer-coverage=trace-cmp
  kcov: support comparison operands collection
  kcov: remove pointless current != NULL check
  kernel/panic.c: add TAINT_AUX
  ...
2017-11-17 16:56:17 -08:00
Davidlohr Bueso
15df03c879 sysvipc: make get_maxid O(1) again
For a custom microbenchmark on a 3.30GHz Xeon SandyBridge, which calls
IPC_STAT over and over, it was calculated that, on avg the cost of
ipc_get_maxid() for increasing amounts of keys was:

 10 keys: ~900 cycles
 100 keys: ~15000 cycles
 1000 keys: ~150000 cycles
 10000 keys: ~2100000 cycles

This is unsurprising as maxid is currently O(n).

By having the max_id available in O(1) we save all those cycles for each
semctl(_STAT) command, the idr_find can be expensive -- which some real
(customer) workloads actually poll on.

Note that this used to be the case, until commit 7ca7e564e0 ("ipc:
store ipcs into IDRs").  The cost is the extra idr_find when doing
RMIDs, but we simply go backwards, and should not take too many
iterations to find the new value.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170831172049.14576-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:04 -08:00
Davidlohr Bueso
ebf66799ac sysvipc: properly name ipc_addid() limit parameter
This is better understood as a limit, instead of size; exactly like the
function comment indicates.  Rename it.

Link: http://lkml.kernel.org/r/20170831172049.14576-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:04 -08:00
Davidlohr Bueso
39c96a1b96 sysvipc: duplicate lock comments wrt ipc_addid()
The comment in msgqueues when using ipc_addid() is quite useful imo.
Duplicate it for shm and semaphores.

Link: http://lkml.kernel.org/r/20170831172049.14576-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:04 -08:00
Davidlohr Bueso
b8fd998384 sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE
Patch series "sysvipc: ipc-key management improvements".

Here are a few improvements I spotted while eyeballing Guillaume's
rhashtable implementation for ipc keys.  The first and fourth patches
are the interesting ones, the middle two are trivial.

This patch (of 4):

The next_id object-allocation functionality was introduced in commit
03f5956680 ("ipc: add sysctl to specify desired next object id").

Given that these new entries are _only_ exported under the
CONFIG_CHECKPOINT_RESTORE option, there is no point for the common case
to even know about ->next_id.  As such rewrite ipc_buildid() such that
it can do away with the field as well as unnecessary branches when
adding a new identifier.  The end result also better differentiates both
cases, so the code ends up being cleaner; albeit the small duplications
regarding the default case.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170831172049.14576-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:04 -08:00
Linus Torvalds
ca5b857cb0 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "Assorted stuff, really no common topic here"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: grab the lock instead of blocking in __fd_install during resizing
  vfs: stop clearing close on exec when closing a fd
  include/linux/fs.h: fix comment about struct address_space
  fs: make fiemap work from compat_ioctl
  coda: fix 'kernel memory exposure attempt' in fsync
  pstore: remove unneeded unlikely()
  vfs: remove unneeded unlikely()
  stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case
  make vfs_ustat() static
  do_handle_open() should be static
  elf_fdpic: fix unused variable warning
  fold destroy_super() into __put_super()
  new helper: destroy_unused_super()
  fix address space warnings in ipc/
  acct.h: get rid of detritus
2017-11-17 12:54:01 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds
6aa211e8ce fix address space warnings in ipc/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-11 13:41:41 -04:00
Al Viro
b776e4b1a9 fix a typo in put_compat_shm_info()
"uip" misspelled as "up"; unfortunately, the latter happens to be
a function and gcc is happy to convert it to void *...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-25 20:41:46 -04:00
Will Deacon
58aff0af75 ipc/shm: Fix order of parameters when calling copy_compat_shmid_to_user
Commit 553f770ef7 ("ipc: move compat shmctl to native") moved the
compat IPC syscall handling into ipc/shm.c and refactored the struct
accessors in the process. Unfortunately, the call to
copy_compat_shmid_to_user when handling a compat {IPC,SHM}_STAT command
gets the arguments the wrong way round, passing a kernel stack address
as the user buffer (destination) and the user buffer as the kernel stack
address (source).

This patch fixes the parameter ordering so the buffers are accessed
correctly.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-20 23:27:48 -04:00
Linus Torvalds
cc73fee0ba Merge branch 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ipc compat cleanup and 64-bit time_t from Al Viro:
 "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa
  Dinamani"

* 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  utimes: Make utimes y2038 safe
  ipc: shm: Make shmid_kernel timestamps y2038 safe
  ipc: sem: Make sem_array timestamps y2038 safe
  ipc: msg: Make msg_queue timestamps y2038 safe
  ipc: mqueue: Replace timespec with timespec64
  ipc: Make sys_semtimedop() y2038 safe
  get rid of SYSVIPC_COMPAT on ia64
  semtimedop(): move compat to native
  shmat(2): move compat to native
  msgrcv(2), msgsnd(2): move compat to native
  ipc(2): move compat to native
  ipc: make use of compat ipc_perm helpers
  semctl(): move compat to native
  semctl(): separate all layout-dependent copyin/copyout
  msgctl(): move compat to native
  msgctl(): split the actual work from copyin/copyout
  ipc: move compat shmctl to native
  shmctl: split the work from copyin/copyout
2017-09-14 17:37:26 -07:00
Guillaume Knispel
0cfb6aee70 ipc: optimize semget/shmget/msgget for lots of keys
ipc_findkey() used to scan all objects to look for the wanted key.  This
is slow when using a high number of keys.  This change adds an rhashtable
of kern_ipc_perm objects in ipc_ids, so that one lookup cease to be O(n).

This change gives a 865% improvement of benchmark reaim.jobs_per_min on a
56 threads Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz with 256G memory [1]

Other (more micro) benchmark results, by the author: On an i5 laptop, the
following loop executed right after a reboot took, without and with this
change:

    for (int i = 0, k=0x424242; i < KEYS; ++i)
        semget(k++, 1, IPC_CREAT | 0600);

                 total       total          max single  max single
   KEYS        without        with        call without   call with

      1            3.5         4.9   µs            3.5         4.9
     10            7.6         8.6   µs            3.7         4.7
     32           16.2        15.9   µs            4.3         5.3
    100           72.9        41.8   µs            3.7         4.7
   1000        5,630.0       502.0   µs             *           *
  10000    1,340,000.0     7,240.0   µs             *           *
  31900   17,600,000.0    22,200.0   µs             *           *

 *: unreliable measure: high variance

The duration for a lookup-only usage was obtained by the same loop once
the keys are present:

                 total       total          max single  max single
   KEYS        without        with        call without   call with

      1            2.1         2.5   µs            2.1         2.5
     10            4.5         4.8   µs            2.2         2.3
     32           13.0        10.8   µs            2.3         2.8
    100           82.9        25.1   µs             *          2.3
   1000        5,780.0       217.0   µs             *           *
  10000    1,470,000.0     2,520.0   µs             *           *
  31900   17,400,000.0     7,810.0   µs             *           *

Finally, executing each semget() in a new process gave, when still
summing only the durations of these syscalls:

creation:
                 total       total
   KEYS        without        with

      1            3.7         5.0   µs
     10           32.9        36.7   µs
     32          125.0       109.0   µs
    100          523.0       353.0   µs
   1000       20,300.0     3,280.0   µs
  10000    2,470,000.0    46,700.0   µs
  31900   27,800,000.0   219,000.0   µs

lookup-only:
                 total       total
   KEYS        without        with

      1            2.5         2.7   µs
     10           25.4        24.4   µs
     32          106.0        72.6   µs
    100          591.0       352.0   µs
   1000       22,400.0     2,250.0   µs
  10000    2,510,000.0    25,700.0   µs
  31900   28,200,000.0   115,000.0   µs

[1] http://lkml.kernel.org/r/20170814060507.GE23258@yexl-desktop

Link: http://lkml.kernel.org/r/20170815194954.ck32ta2z35yuzpwp@debix
Signed-off-by: Guillaume Knispel <guillaume.knispel@supersonicimagine.com>
Reviewed-by: Marc Pardo <marc.pardo@supersonicimagine.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Guillaume Knispel <guillaume.knispel@supersonicimagine.com>
Cc: Marc Pardo <marc.pardo@supersonicimagine.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:51 -07:00
Davidlohr Bueso
e4243b8062 ipc/sem: play nicer with large nsops allocations
Replacing semop()'s kmalloc for kvmalloc was originally proposed by
Manfred on the premise that it can be called for large (than order-1)
sizes.  For example, while Oracle recommends setting SEMOPM to a _minimum_
of 100, some distros[1] encourage the setting to be a factor of the amount
of db tasks (PROCESSES), which can get fishy for large systems (easily
going beyond 1000).

[1] An Example of Semaphore Settings
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/5/html/Tuning_and_Optimizing_Red_Hat_Enterprise_Linux_for_Oracle_9i_and_10g_Databases/sect-Oracle_9i_and_10g_Tuning_Guide-Setting_Semaphores-An_Example_of_Semaphore_Settings.html

So let's just convert this to kvmalloc, just like the rest of the
allocations we do in ipc.  While the fallback vmalloc obviously involves
more overhead, this by far the uncommon path, and it's better for the user
than just erroring out with kmalloc.

Link: http://lkml.kernel.org/r/20170803184136.13855-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:51 -07:00
Davidlohr Bueso
8419e64a0b ipc/sem: drop sem_checkid helper
... 'tis not used.

Link: http://lkml.kernel.org/r/20170803184136.13855-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:51 -07:00
Elena Reshetova
9405c03ee7 ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.  This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.

Link: http://lkml.kernel.org/r/1499417992-3238-4-git-send-email-elena.reshetova@intel.com
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:51 -07:00
Elena Reshetova
f74370b86e ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.  This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.

Link: http://lkml.kernel.org/r/1499417992-3238-3-git-send-email-elena.reshetova@intel.com
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:51 -07:00
Elena Reshetova
a2e0602c36 ipc: convert ipc_namespace.count from atomic_t to refcount_t
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.  This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.

Link: http://lkml.kernel.org/r/1499417992-3238-2-git-send-email-elena.reshetova@intel.com
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:51 -07:00
Deepa Dinamani
7ff2819e8d ipc: shm: Make shmid_kernel timestamps y2038 safe
time_t is not y2038 safe. Replace all uses of
time_t by y2038 safe time64_t.

Similarly, replace the calls to get_seconds() with
y2038 safe ktime_get_real_seconds().
Note that this preserves fast access on 64 bit systems,
but 32 bit systems need sequence counters.

The syscall interfaces themselves are not changed as part of
the patch. They will be part of a different series.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03 20:24:29 -04:00
Deepa Dinamani
e54d02b23c ipc: sem: Make sem_array timestamps y2038 safe
time_t is not y2038 safe. Replace all uses of
time_t by y2038 safe time64_t.

Similarly, replace the calls to get_seconds() with
y2038 safe ktime_get_real_seconds().
Note that this preserves fast access on 64 bit systems,
but 32 bit systems need sequence counters.

The syscall interface themselves are not changed as part of
the patch. They will be part of a different series.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03 20:24:29 -04:00
Deepa Dinamani
50578ea97a ipc: msg: Make msg_queue timestamps y2038 safe
time_t is not y2038 safe. Replace all uses of
time_t by y2038 safe time64_t.

Similarly, replace the calls to get_seconds() with
y2038 safe ktime_get_real_seconds().
Note that this preserves fast access on 64 bit systems,
but 32 bit systems need sequence counters.

The syscall interfaces themselves are not changed as part of
the patch. They will be part of a different series.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03 20:21:24 -04:00
Deepa Dinamani
b904772638 ipc: mqueue: Replace timespec with timespec64
struct timespec is not y2038 safe. Replace
all uses of timespec by y2038 safe struct timespec64.

Even though timespec is used here to represent timeouts,
replace these with timespec64 so that it facilitates
in verification by creating a y2038 safe kernel image
that is free of timespec.

The syscall interfaces themselves are not changed as part
of the patch. They will be part of a different series.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03 20:21:24 -04:00
Deepa Dinamani
3ef56dc267 ipc: Make sys_semtimedop() y2038 safe
struct timespec is not y2038 safe on 32 bit machines.
Replace timespec with y2038 safe struct timespec64.

Note that the patch only changes the internals without
modifying the syscall interface. This will be part
of a separate series.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03 20:21:23 -04:00
Ingo Molnar
94edf6f3c2 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

 - Removal of spin_unlock_wait()
 - SRCU updates
 - Torture-test updates
 - Documentation updates
 - Miscellaneous fixes
 - CPU-hotplug fixes
 - Miscellaneous non-RCU fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21 09:45:19 +02:00
Paul E. McKenney
e0892e086a ipc: Replace spin_unlock_wait() with lock/unlock pair
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair.  This commit therefore replaces the spin_unlock_wait() call in
exit_sem() with spin_lock() followed immediately by spin_unlock().
This should be safe from a performance perspective because exit_sem()
is rarely invoked in production.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
2017-08-17 08:08:57 -07:00
Kees Cook
ade9f91b32 ipc: add missing container_of()s for randstruct
When building with the randstruct gcc plugin, the layout of the IPC
structs will be randomized, which requires any sub-structure accesses to
use container_of().  The proc display handlers were missing the needed
container_of()s since the iterator is passing in the top-level struct
kern_ipc_perm.

This would lead to crashes when running the "lsipc" program after the
system had IPC registered (e.g. after starting up Gnome):

  general protection fault: 0000 [#1] PREEMPT SMP
  ...
  RIP: 0010:shm_add_rss_swap.isra.1+0x13/0xa0
  ...
  Call Trace:
    sysvipc_shm_proc_show+0x5e/0x150
    sysvipc_proc_show+0x1a/0x30
    seq_read+0x2e9/0x3f0
  ...

Link: http://lkml.kernel.org/r/20170730205950.GA55841@beast
Fixes: 3859a271a0 ("randstruct: Mark various structs for randomization")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 17:16:12 -07:00
Al Viro
44ee454670 semtimedop(): move compat to native
... and finally kill the sodding compat_convert_timespec()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:47 -04:00
Al Viro
a78ee9ed2f shmat(2): move compat to native
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:47 -04:00
Al Viro
9b1404c24a msgrcv(2), msgsnd(2): move compat to native
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:46 -04:00
Al Viro
20bc2a3aff ipc(2): move compat to native
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:45 -04:00
Al Viro
28327fae62 ipc: make use of compat ipc_perm helpers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:45 -04:00
Al Viro
c0ebccb6fa semctl(): move compat to native
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:44 -04:00
Al Viro
45a4a64ab4 semctl(): separate all layout-dependent copyin/copyout
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:44 -04:00
Al Viro
4693916846 msgctl(): move compat to native
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:43 -04:00
Al Viro
156d9ed126 msgctl(): split the actual work from copyin/copyout
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:43 -04:00
Al Viro
553f770ef7 ipc: move compat shmctl to native
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15 20:46:42 -04:00