Commit graph

12 commits

Author SHA1 Message Date
Gayatri Kammela
099b548c42 raid6/test/test.c: bug fix: Specify aligned(alignment) attributes to the char arrays
Specifying the aligned attributes to the char data[NDISKS][PAGE_SIZE],
char recovi[PAGE_SIZE] and char recovi[PAGE_SIZE] arrays, so that all
malloc memory is page boundary aligned.

Without these alignment attributes, the test causes a segfault in
userspace when the NDISKS are changed to 4 from 16.

The RAID stripes will be page aligned anyway, so we want to test what
the kernel actually will execute.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-26 16:18:21 -07:00
Gayatri Kammela
161db5d165 lib/raid6/test/Makefile: Add avx512 gen_syndrome and recovery functions
Adding avx512 gen_syndrome and recovery functions so as to allow code to
be compiled and tested successfully in userspace.

This patch is tested in userspace and improvement in performace is
observed.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jim Kukunas <james.t.kukunas@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-21 09:09:44 -07:00
Markus Stockhausen
7e92e1d762 md/raid6 algorithms: improve test program
It is always helpful to have a test tool in place if we implement
new data critical algorithms. So add some test routines to the raid6
checker that can prove if the new xor_syndrome() works as expected.

Run through all permutations of start/stop pages per algorithm and
simulate a xor_syndrome() assisted rmw run. After each rmw check if
the recovery algorithm still confirms that the stripe is fine.

Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22 08:00:42 +10:00
Linus Torvalds
4d7696f1b0 md update for v3.12
Headline item is multithreading for RAID5 so that more
 IO/sec can be supported on fast (SSD) devices.
 Also TILE-Gx SIMD suppor for RAID6 calculations and an
 assortment of bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIVAwUAUi6dRTnsnt1WYoG5AQIqMBAAm/XUEqfyBNUiTPHmIU/OyReOlfsp8A2o
 xtcmSzaCtIUz4btPszUrw3PShqnk+lXXX2AB0rp3PzfOgyNYXBRKbzOf3eGr2VEp
 L/Cm0iSWHqQ7V7MoV5ZrqtvuyJV1a7FK3a3VaoKaUk424o4sZ7P67t/YZAnTCP/i
 9wQoPeIOJ8YjZsaAQjzI3q7yRMRE8ytyBnF4NdgeMyr2p17w2e9pnmNfCTo4wnWs
 Nu2wPr2QCPQXr/FoIhdIVEy3kVatqH8qXG8Fw+5n07HJYxGCvQZLDuoOVDYyFeoW
 gnNq2MMgLZm/7Nzqd1bN+QQZuBCd5JL4VJ2G4vLfYrn3ZSdSysrVKQXFKYG3Gkua
 1KP4Pv0hndAl4DtGbUk8CiZp6b+c5qeWvq+sO2NuhUGmumFMK2q4DJhITNexjmrs
 Eg4opnR8JMLDkYD6o52Ziu5KQR/q1PKRLj80eoVuqB2QQM5+NPb4s3k2WN+53lQD
 L9fH2alUxxSK+5R8ykk923QQ/XErMUwXaka+O/gGFAlYvaaW/GKTxFnKn/GIXAkc
 tKW88zB+zA5EZEFec+K43z1UjtGxMWsryvDN55ON2iV+LIZBISm7krroBeR55cyO
 +3tHlPsga0pO+9DdSm7hvZeWRrq5ZJTiZmL/e2FYygrC5tFAY0p+z49fK3e9Th13
 C85G7fg3yDY=
 =zLxh
 -----END PGP SIGNATURE-----

Merge tag 'md/3.12' of git://neil.brown.name/md

Pull md update from Neil Brown:
 "Headline item is multithreading for RAID5 so that more IO/sec can be
  supported on fast (SSD) devices.  Also TILE-Gx SIMD suppor for RAID6
  calculations and an assortment of bug fixes"

* tag 'md/3.12' of git://neil.brown.name/md:
  raid5: only wakeup necessary threads
  md/raid5: flush out all pending requests before proceeding with reshape.
  md/raid5: use seqcount to protect access to shape in make_request.
  raid5: sysfs entry to control worker thread number
  raid5: offload stripe handle to workqueue
  raid5: fix stripe release order
  raid5: make release_stripe lockless
  md: avoid deadlock when dirty buffers during md_stop.
  md: Don't test all of mddev->flags at once.
  md: Fix apparent cut-and-paste error in super_90_validate
  raid6/test: replace echo -e with printf
  RAID: add tilegx SIMD implementation of raid6
  md: fix safe_mode buglet.
  md: don't call md_allow_write in get_bitmap_file.
2013-09-10 13:03:41 -07:00
Max Filippov
c28399b594 raid6/test: replace echo -e with printf
-e is a non-standard echo option, echo output is
implementation-dependent when it is used. Replace echo -e with printf as
suggested by POSIX echo manual.

Cc: NeilBrown <neilb@suse.de>
Cc: Jim Kukunas <james.t.kukunas@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27 16:06:06 +10:00
Ken Steele
ae77cbc1e7 RAID: add tilegx SIMD implementation of raid6
This change adds TILE-Gx SIMD instructions to the software raid
(md), modeling the Altivec implementation. This is only for Syndrome
generation; there is more that could be done to improve recovery,
as in the recent Intel SSE3 recovery implementation.

The code unrolls 8 times; this turns out to be the best on tilegx
hardware among the set 1, 2, 4, 8 or 16.  The code reads one
cache-line of data from each disk, stores P and Q then goes to the
next cache-line.

The test code in sys/linux/lib/raid6/test reports 2008 MB/s data
read rate for syndrome generation using 18 disks (16 data and 2
parity). It was 1512 MB/s before this SIMD optimizations. This is
running on 1 core with all the data in cache.

This is based on the paper The Mathematics of RAID-6.
(http://kernel.org/pub/linux/kernel/people/hpa/raid6.pdf).

Signed-off-by: Ken Steele <ken@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27 16:05:50 +10:00
Ard Biesheuvel
7d11965ddb lib/raid6: add ARM-NEON accelerated syndrome calculation
Rebased/reworked a patch contributed by Rob Herring that uses
NEON intrinsics to perform the RAID-6 syndrome calculations.
It uses the existing unroll.awk code to generate several
unrolled versions of which the best performing one is selected
at boot time.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: hpa@linux.intel.com
2013-07-08 22:09:18 +01:00
Yuanhan Liu
4f8c55c5ad lib/raid6: build proper files on corresponding arch
sse and avx2 stuff only exist on x86 arch, and we don't need to build
altivec on x86. And we can do that at lib/raid6/Makefile.

Proposed-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-12-13 19:51:04 +11:00
Yuanhan Liu
2c935842bd lib/raid6: Add AVX2 optimized gen_syndrome functions
Add AVX2 optimized gen_syndrom functions, which is simply based on
sse2.c written by hpa.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-12-13 19:51:03 +11:00
Jim Kukunas
7056741fd9 lib/raid6: Add AVX2 optimized recovery functions
Optimize RAID6 recovery functions to take advantage of
the 256-bit YMM integer instructions introduced in AVX2.

The patch was tested and benchmarked before submission.
However hardware is not yet released so benchmark numbers
cannot be reported.

Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-12-13 16:42:01 +11:00
Jim Kukunas
2dbf708448 lib/raid6: update test program for recovery functions
Test each combination of recovery and syndrome generation
functions.

Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:54:23 +10:00
David Woodhouse
cc4589ebfa Rename raid6 files now they're in a 'raid6' directory.
Linus asks 'why "raid6" twice?'. No reason.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11 00:19:05 +01:00