Commit graph

311 commits

Author SHA1 Message Date
Sathya Perla
2dc1deb659 be2net: request native mode each time the card is reset
Currently be3-native mode is requested only in probe(). It must be requested, each time the card is reset either after an EEH error or after
sleep/hibernation.
Also, the be_cmd_check_native_mode() is better named be_cmd_req_native_mode()

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21 21:32:54 -07:00
Ajit Khaparde
4c5102f94c be2net: move to new vlan model
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12 22:10:01 -07:00
Eric Dumazet
1e75896294 be2net: account for skb allocation failures
If we cannot allocate new skbs in RX completion handler, we should
increase netdevice rx_dropped counter, not spam console messages.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12 22:09:18 -07:00
Joe Perches
42c8b11e28 benet: Add missing comma between constant string array
Multiple quoted strings are concatenated without comma separators.

Make the arrays const while there.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-09 02:56:56 -07:00
Sathya Perla
b9ab82c774 be2net: clear intr bit in be_probe()
It may be set in the card while the driver is probed by kdump kernel after a
crash.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30 22:32:50 -07:00
Sathya Perla
482c9e7987 be2net: create/destroy rx-queues on interface open/close
On some skews, the BE card sends pause frames (and not drop pkts) if there are
no more posted buffers available for packet reception.  This behaviour has a
side effect: When an interface is disabled, buffers are no longer posted on the
corresponding RX rings. All broadcast and multicast traffic being received on
the port will quickly fill up the PMEM and cause pause push back. As the PMEM
is shared by both the ports, all traffic being received on the other (enabled)
port also gets stalled.
The fix is to destroy RX rings when the interface is disabled. If there is no
RX ring match in the RXF lookup, the packets are discarded and so don't hog the
PMEM.
The RXQ creation cmd must now use MCC instead of MBOX as they are are called
post MCC queue creation.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30 22:32:50 -07:00
Sathya Perla
2b3f291bf9 be2net: fix certain cmd failure logging
Some (older)versions of cards/fw may not recognize certain cmds and
return illegal/unsupported errors. As long as the driver can handle
this gracefully there is no need to log an error msg.
Also finetuned 2 existing error log messages.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30 22:32:50 -07:00
Sathya Perla
2903dd654d be2net: fix initialization of vlan_prio_bmap
Initialization of this field to "all priorities" must be done before MCC queue
creation. As soon as the MCC queue is created, an event modifying this value
may be received.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27 00:09:31 -07:00
Sathya Perla
c814fd3669 be2net: get rid of multi_rxq module param
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27 00:09:31 -07:00
Sathya Perla
6e53391cb4 be2net: fix netdev_stats_update
Problem initially reproted and fixed by Eric Dumazet <eric.dumazet@gmail.com>

netdev_stats_update() resets netdev->stats and then accumulates stats from
various rings. This is wrong as stats readers can sometimes catch zero values.
Use temporary variables instead for accumulating per-ring values.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27 00:09:31 -07:00
Jesper Juhl
95cb3656c0 net: Remove unneeded version.h includes from drivers/net/
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/net/.
This patch removes them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24 02:40:08 -07:00
Joe Perches
43d620c829 drivers/net: Remove casts of void *
Unnecessary casts of void * clutter the code.

These are the remainder casts after several specific
patches to remove netdev_priv and dev_priv.

Done via coccinelle script (and a little editing):

$ cat cast_void_pointer.cocci
@@
type T;
T *pt;
void *pv;
@@

- pt = (T *)pv;
+ pt = pv;

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-By: Chris Snook <chris.snook@gmail.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21 15:48:29 -07:00
Sathya Perla
3c8def9776 be2net: support multiple TX queues
This patch provides support for multiple TX queues.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-16 23:02:04 -04:00
Padmanabh Ratnakar
eb8a50d9a6 be2net: Enable NETIF_F_TSO6 for VLAN traffic for BE
NETIF_F_TSO6 for VLAN packets was not enabled for BE adapters.
Enabling it.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-11 15:58:46 -07:00
Selvin Xavier
aedfebbaa7 be2net: Fix Rx pause counter for lancer
Fixed Rx pause counter for Lancer. Swapping hi and lo words.

Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06 22:53:52 -07:00
Somnath Kotur
34b1ef04fc be2net: Fallback to the older opcode if MCC_CREATE_EXT opcode is not supported on the card
Instead of failing the init/probe code in the driver fallback to the older opcode to ensure
the driver is loaded thereby enabling users to upgrade the f/w to whatever version is required.

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-31 22:15:28 -07:00
Sathya Perla
5d8bee676f be2net: hash key for rss-config cmd not set
A non-zero, non-descript value is needed as the hash key. The hash variable was left un-initialized; but sometimes it gets a zero value
and hashing is not effective. The constant value used now (not of any significance) seems to work fine.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-24 13:33:45 -04:00
Paul Gortmaker
70c7160619 Add appropriate <linux/prefetch.h> include for prefetch users
After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '<linux/prefetch.h>' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include <linux/?a'
 		echo '#include <linux/prefetch.h>'
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================

Signed-off-by: Paul <paul.gortmaker@windriver.com>
[ Fixed up some incorrect #include placements, and added some
  non-network drivers and the fib_trie.c case    - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-22 21:41:57 -07:00
David S. Miller
63722966d7 be2net: Kill set but unused variable 'req' in lancer_fw_download()
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:49:54 -04:00
Mammatha Edhala
12f4d0a877 be2net: Enable SR-IOV for Lancer
Enable SR-IOV for Lancer

Signed-off-by: Mammatha Edhala <mammatha.edhala@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-18 17:30:56 -04:00
Shripad Nunjundarao
485bf569ba be2net: FW download for Lancer
Added implementation of FW download feature for Lancer.

Signed-off-by: Shripad Nunjundarao <shripad.nunjundarao@emulex.com>
Signed-off-by: Sevin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 14:13:53 -04:00
Selvin Xavier
005d569600 be2net: Stats for Lancer
Added Lancer stats implementation.

Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 14:13:53 -04:00
Ajit Khaparde
89a88ab84b be2net: Support for version 1 of stats for BE3
Added support to get version 1 of the stats for BE3.
Use old stats command for BE2.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 14:13:52 -04:00
Sathya Perla
1dbf53a282 be2net: fix mbox polling for signal reception
Sending mbox cmds require multiple steps of writing to the DB register and polling
for an ack. Gettting interrupted in the middle by a signal breaks the mbox protocol.
Use msleep() to not get interrupted.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 14:41:35 -04:00
Sathya Perla
6ed35eea3b be2net: handle signal reception while waiting for POST
If waiting on POST returns prematurely (due to a signal), abort polling and return an error.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13 14:41:34 -04:00
Padmanabh Ratnakar
4d586b823a be2net: Fix to prevent flooding of TX queue
Start/stop TX queue is controlled by TX queue "used" counter.
It is incremented while WRBs are posted to TX queue and
decremented when TX completions are received. This counter was
getting decremented before HW is informed about processing of TX
completions. As used counter is decremented, transmit function
posts new WRBs and creates completion queue full scenario in HW.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11 19:10:03 -04:00
Padmanabh Ratnakar
ecd0bf0f7b be2net: Use NTWK_RX_FILTER command for promiscous mode
Use OPCODE_COMMON_NTWK_RX_FILTER command for promiscous mode as
OPCODE_ETH_PROMISCUOUS command is getting deprecated.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11 19:10:03 -04:00
Padmanabh Ratnakar
18a91e6002 be2net: In case of UE, do not dump registers for Lancer
In case of UE, do not dump registers for Lancer as they are not
supported.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11 19:10:03 -04:00
Padmanabh Ratnakar
6bd011d542 be2net: Disable coalesce water mark mode of CQ for Lancer
Disable coalesce water mark mode of CQ for Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11 19:10:03 -04:00
Padmanabh Ratnakar
009dd872d7 be2net: Handle error completion in Lancer
In Lancer if a frame is DMAed partially due to lack of RX buffers,
an error completion is sent with packet size as zero and num_recvd
indicating number of used buffers. These buffers need to be freed
and packet dropped.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11 19:10:02 -04:00
David S. Miller
3c709f8fb4 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6
Conflicts:
	drivers/net/benet/be_main.c
2011-05-11 14:26:58 -04:00
Somnath Kotur
6709d9521d be2net: Fixed bugs related to PVID.
Fixed bug to make sure 'pvid' retrieval will work on big endian hosts.
Fixed incorrect comparison between the Rx Completion's 16-bit VLAN TCI
and the PVID. Now comparing only the relevant 12 bits corresponding to
the VID.
Renamed 'vid' field under Rx Completion to 'vlan_tag' to reflect
accurate description.

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 11:51:04 -07:00
David Decotigny
7073949720 ethtool: cosmetic: Use ethtool ethtool_cmd_speed API
This updates the network drivers so that they don't access the
ethtool_cmd::speed field directly, but use ethtool_cmd_speed()
instead.

For most of the drivers, these changes are purely cosmetic and don't
fix any problem, such as for those 1GbE/10GbE drivers that indirectly
call their own ethtool get_settings()/mii_ethtool_gset(). The changes
are meant to enforce code consistency and provide robustness with
future larger throughputs, at the expense of a few CPU cycles for each
ethtool operation.

All drivers compiled with make allyesconfig ion x86_64 have been
updated.

Tested: make allyesconfig on x86_64 + e1000e/bnx2x work
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29 14:03:01 -07:00
David S. Miller
2bd93d7af1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Resolved logic conflicts causing a build failure due to
drivers/net/r8169.c changes using a patch from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 12:16:46 -07:00
Somnath Kotur
fe2a70eefa be2net: Fixed a bug in be_cmd_get_regs().
Same WRB entry was being reused over different iterations of a
loop while issuing non-embedded IOCTL requests.Fixed couple of minor bugs
in this path as well.
Re-factored code to alloc/free memory for DMA outside of loop

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25 12:13:47 -07:00
Ivan Vecera
e74fbd0302 be2net: increment work_counter in be_worker
The commit 609ff3b ("be2net: add code to display temperature of ASIC")
adds support to display temperature of ASIC but there is missing
increment of work_counter in be_worker. Because of this 1) the
function be_cmd_get_die_temperature is called every 1 second instead
of every 32 seconds 2) be_cmd_get_die_temperature is called, although
it is not supported.  This patch fixes this bug.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21 17:36:00 -07:00
Ajit Khaparde
d0381c42aa be2net: add code to display default value of tx rate for VFs
This change will allow the default value of tx rate to be displayed
when ip link show is called on a PF interface.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 20:13:11 -07:00
Ajit Khaparde
187e87566d be2net: pass domain id to be_cmd_link_status_query
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 20:13:10 -07:00
Ajit Khaparde
6349935bdf be2net: fix be_mcc_compl_process to identify eth_get_stat command
eth_get_statistics and vlan_config command have same opcode.
Use opcode subsystem id to differentiate one from other.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 20:13:10 -07:00
Ajit Khaparde
4fa9ed07e3 be2net: Add code to display nic speeds other than 1Gbps/10Gbps
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 20:13:09 -07:00
Ajit Khaparde
16a871ef55 be2net: allow register dump only for PFs
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 20:13:09 -07:00
Michał Mirosław
66a1c54132 net: benet: convert to hw_features - fixup
Remove be_set_flags() as it's already covered by hw_features.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ajit Khaparde ajit.khaparde@emulex.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17 17:47:34 -07:00
David S. Miller
03746b0a02 be2net: Fix unused-but-set variables.
The variables 'tx_min' and 'tx_max' are set but not used in
be_set_coalesce().

Similarly for 'region' in be_do_flash().

Just kill them off.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17 17:08:41 -07:00
Allan, Bruce W
fce55922f5 ethtool: allow custom interval for physical identification
When physical identification of an adapter is done by toggling the
mechanism on and off through software utilizing the set_phys_id operation,
it is done with a fixed duration for both on and off states.  Some drivers
may want to set a custom duration for the on/off intervals.  This patch
changes the API so the return code from the driver's entry point when it
is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to
cycle the on/off states, and updates the drivers that have already been
converted to use the new set_phys_id and use the synchronous method for
identifying an adapter.

The physical identification frequency set in the updated drivers is based
on how it was done prior to the introduction of set_phys_id.

Compile tested only.  Also fixes a compiler warning in sfc.

v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE
v3: fold patchset into single patch and cleanup per Ben's feedback

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Divy Le Ray <divy@chelsio.com>
Cc: Don Fry <pcnet32@frontier.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Steve Hodgson <shodgson@solarflare.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14 21:15:49 -07:00
David S. Miller
1c01a80cfe Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/smsc911x.c
2011-04-11 13:44:25 -07:00
Linus Torvalds
c44eaf41a5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
  net: Add support for SMSC LAN9530, LAN9730 and LAN89530
  mlx4_en: Restoring RX buffer pointer in case of failure
  mlx4: Sensing link type at device initialization
  ipv4: Fix "Set rt->rt_iif more sanely on output routes."
  MAINTAINERS: add entry for Xen network backend
  be2net: Fix suspend/resume operation
  be2net: Rename some struct members for clarity
  pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev
  dsa/mv88e6131: add support for mv88e6085 switch
  ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)
  be2net: Fix a potential crash during shutdown.
  bna: Fix for handling firmware heartbeat failure
  can: mcp251x: Allow pass IRQ flags through platform data.
  smsc911x: fix mac_lock acquision before calling smsc911x_mac_read
  iwlwifi: accept EEPROM version 0x423 for iwl6000
  rt2x00: fix cancelling uninitialized work
  rtlwifi: Fix some warnings/bugs
  p54usb: IDs for two new devices
  wl12xx: fix potential buffer overflow in testmode nvs push
  zd1211rw: reset rx idle timer from tasklet
  ...
2011-04-11 07:27:24 -07:00
Michał Mirosław
8b8ddc68df net: benet: convert to hw_features - fixup
Fix up after merge with NETIF_F_RXHASH implementation.

This allows to toggle NETIF_F_RXHASH and NETIF_F_HW_VLAN_TX.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-10 18:55:18 -07:00
Michał Mirosław
6332c8d3a5 net: benet: convert to hw_features
Simple conversion.

This also fixes a bug in TX checksum toggling --- driver was changing
NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07 20:16:57 -07:00
Ajit Khaparde
5784186919 be2net: call FLR after setup wol in be_shutdown
Calling setup_wol after a reset is inconsequential.
The WOL setting should be programmed before FLR.
And yes, FLR does not erase wol information.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07 15:05:00 -07:00
Ajit Khaparde
48f5a19168 be2net: dynamically allocate adapter->vf_cfg
Instead of a fixed sized array for vf_cfg, allocate the size dynamically
depending on number of VFs the device supports.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07 15:04:45 -07:00