Commit Graph

20 Commits

Author SHA1 Message Date
Mike Kravetz 0ef7dcac99 mm/cma: change cma mutex to irq safe spinlock
Patch series "make hugetlb put_page safe for all calling contexts", v5.

This effort is the result a recent bug report [1].  Syzbot found a
potential deadlock in the hugetlb put_page/free_huge_page_path.  WARNING:
SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected Since the
free_huge_page_path already has code to 'hand off' page free requests to a
workqueue, a suggestion was proposed to make the in_irq() detection
accurate by always enabling PREEMPT_COUNT [2].  The outcome of that
discussion was that the hugetlb put_page path (free_huge_page) path should
be properly fixed and safe for all calling contexts.

[1] https://lore.kernel.org/linux-mm/000000000000f1c03b05bc43aadc@google.com/
[2] http://lkml.kernel.org/r/20210311021321.127500-1-mike.kravetz@oracle.com

This patch (of 8):

cma_release is currently a sleepable operatation because the bitmap
manipulation is protected by cma->lock mutex.  Hugetlb code which relies
on cma_release for CMA backed (giga) hugetlb pages, however, needs to be
irq safe.

The lock doesn't protect any sleepable operation so it can be changed to a
(irq aware) spin lock.  The bitmap processing should be quite fast in
typical case but if cma sizes grow to TB then we will likely need to
replace the lock by a more optimized bitmap implementation.

Link: https://lkml.kernel.org/r/20210409205254.242291-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20210409205254.242291-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: HORIGUCHI NAOYA <naoya.horiguchi@nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:21 -07:00
Jakub Kicinski a2b992c828 debugfs: make sure we can remove u32_array files cleanly
debugfs_create_u32_array() allocates a small structure to wrap
the data and size information about the array. If users ever
try to remove the file this leads to a leak since nothing ever
frees this wrapper.

That said there are no upstream users of debugfs_create_u32_array()
that'd remove a u32 array file (we only have one u32 array user in
CMA), so there is no real bug here.

Make callers pass a wrapper they allocated. This way the lifetime
management of the wrapper is on the caller, and we can avoid the
potential leak in debugfs.

CC: Chucheng Luo <luochucheng@vivo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10 13:54:00 -07:00
zhong jiang a9ea242a06 mm/cma_debug.c: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
It is more clear to use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs file
operation rather than DEFINE_SIMPLE_ATTRIBUTE.

Link: http://lkml.kernel.org/r/1572348687-9951-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yue Hu <huyue2@yulong.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 12:59:09 -08:00
Yue Hu f0fd50504a mm/cma_debug.c: fix the break condition in cma_maxchunk_get()
If not find zero bit in find_next_zero_bit(), it will return the size
parameter passed in, so the start bit should be compared with bitmap_maxno
rather than cma->count.  Although getting maxchunk is working fine due to
zero value of order_per_bit currently, the operation will be stuck if
order_per_bit is set as non-zero.

Link: http://lkml.kernel.org/r/20190319092734.276-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:45 -07:00
Yue Hu 5a7f1b2f2f mm/cma_debug.c: remove static scoped cma_debugfs_root
Currently cma_debugfs_root is static storage.  That is unnecessary since
it will be only used by next cma_debugfs_add_one().  We can just pass it
to following calling to save thisspace.  Also remove useless idx
parameter.

Link: http://lkml.kernel.org/r/20190221040130.8940-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:20 -08:00
Greg Kroah-Hartman d9f7979c92 mm: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Link: http://lkml.kernel.org/r/20190122152151.16139-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:17 -08:00
Marek Szyprowski 6518202970 mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
cma_alloc() doesn't really support gfp flags other than __GFP_NOWARN, so
convert gfp_mask parameter to boolean no_warn parameter.

This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941f6 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").

Link: http://lkml.kernel.org/r/20180709122019eucas1p2340da484acfcc932537e6014f4fd2c29~-sqTPJKij2939229392eucas1p2j@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:32 -07:00
Joe Perches 0825a6f986 mm: use octal not symbolic permissions
mm/*.c files use symbolic and octal styles for permissions.

Using octal and not symbolic permissions is preferred by many as more
readable.

https://lkml.org/lkml/2016/8/2/1945

Prefer the direct use of octal for permissions.

Done using
$ scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace mm/*.c
and some typing.

Before:	 $ git grep -P -w "0[0-7]{3,3}" mm | wc -l
44
After:	 $ git grep -P -w "0[0-7]{3,3}" mm | wc -l
86

Miscellanea:

o Whitespace neatening around these conversions.

Link: http://lkml.kernel.org/r/2e032ef111eebcd4c5952bae86763b541d373469.1522102887.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15 07:55:25 +09:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Prakash Gupta da094e4284 mm/cma_debug.c: fix stack corruption due to sprintf usage
name[] in cma_debugfs_add_one() can only accommodate 16 chars including
NULL to store sprintf output.  It's common for cma device name to be
larger than 15 chars.  This can cause stack corrpution.  If the gcc
stack protector is turned on, this can cause a panic due to stack
corruption.

Below is one example trace:

  Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in:
  ffffff8e69a75730
  Call trace:
     dump_backtrace+0x0/0x2c4
     show_stack+0x20/0x28
     dump_stack+0xb8/0xf4
     panic+0x154/0x2b0
     print_tainted+0x0/0xc0
     cma_debugfs_init+0x274/0x290
     do_one_initcall+0x5c/0x168
     kernel_init_freeable+0x1c8/0x280

Fix the short sprintf buffer in cma_debugfs_add_one() by using
scnprintf() instead of sprintf().

Link: http://lkml.kernel.org/r/1502446217-21840-1-git-send-email-guptap@codeaurora.org
Fixes: f318dd083c ("cma: Store a name in the cma structure")
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 15:32:02 -07:00
Laura Abbott f318dd083c cma: Store a name in the cma structure
Frameworks that may want to enumerate CMA heaps (e.g. Ion) will find it
useful to have an explicit name attached to each region. Store the name
in each CMA structure.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-18 20:41:12 +02:00
Lucas Stach e2f466e32f mm: cma_alloc: allow to specify GFP mask
Most users of this interface just want to use it with the default
GFP_KERNEL flags, but for cases where DMA memory is allocated it may be
called from a different context.

No functional change yet, just passing through the flag to the
underlying alloc_contig_range function.

Link: http://lkml.kernel.org/r/20170127172328.18574-2-l.stach@pengutronix.de
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:55 -08:00
Joonsoo Kim d56e84b406 mm/cma_debug: correct size input to bitmap function
In CMA, 1 bit in bitmap means 1 << order_per_bits pages so size of
bitmap is cma->count >> order_per_bits rather than just cma->count.
This patch fixes it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Joonsoo Kim 2292c0b1c4 mm/cma_debug: fix debugging alloc/free interface
CMA has alloc/free interface for debugging.  It is intended that
alloc/free occurs in specific CMA region, but, currently, alloc/free
interface is on root dir due to the bug so we can't select CMA region
where alloc/free happens.

This patch fixes this problem by making alloc/free interface per CMA
region.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Andrew Morton bda6d33042 mm/cma_debug.c: remove blank lines before DEFINE_SIMPLE_ATTRIBUTE()
Like EXPORT_SYMBOL(): the positioning communicates that the macro pertains
to the immediately preceding function.

Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Weijie Yang <weijie.yang@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Cc: Aleksei Mateosian <a.mateosian@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:20 -07:00
Dmitry Safonov 2e32b94760 mm: cma: add functions to get region pages counters
Here are two functions that provide interface to compute/get used size and
size of biggest free chunk in cma region.  Add that information to
debugfs.

[akpm@linux-foundation.org: move debug code from cma.c into cma_debug.c]
[stefan.strogin@gmail.com: move code from cma_get_used() and cma_get_maxchunk() to cma_used_get() and cma_maxchunk_get()]
Signed-off-by: Dmitry Safonov <d.safonov@partner.samsung.com>
Signed-off-by: Stefan Strogin <stefan.strogin@gmail.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Weijie Yang <weijie.yang@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Cc: Aleksei Mateosian <a.mateosian@samsung.com>
Signed-off-by: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:20 -07:00
Andrew Morton 875abdb6d4 mm-cma-allocation-trigger-fix
s/CONFIG_CMA_ALIGNMENT/0/, per Joonsoo

Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:00 -07:00
Sasha Levin 8325330b02 mm: cma: release trigger
Provides a userspace interface to trigger a CMA release.

Usage:

        echo [pages] > free

This would provide testing/fuzzing access to the CMA release paths.

[akpm@linux-foundation.org: coding-style fixes]
[mhocko@suse.cz: fix build]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:00 -07:00
Sasha Levin 26b02a1f96 mm: cma: allocation trigger
Provides a userspace interface to trigger a CMA allocation.

Usage:

        echo [pages] > alloc

This would provide testing/fuzzing access to the CMA allocation paths.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:00 -07:00
Sasha Levin 28b24c1fc8 mm: cma: debugfs interface
I've noticed that there is no interfaces exposed by CMA which would let me
fuzz what's going on in there.

This small patchset exposes some information out to userspace, plus adds
the ability to trigger allocation and freeing from userspace.

This patch (of 3):

Implement a simple debugfs interface to expose information about CMA areas
in the system.

Useful for testing/sanity checks for CMA since it was impossible to
previously retrieve this information in userspace.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:00 -07:00