Commit graph

142 commits

Author SHA1 Message Date
Joachim Fenkes
9ab1428dfe fsi/sbefifo: Fix reset timeout
On BMCs with lower timer resolution than 1ms, msleep(1) will take
way longer than 1ms, so looping 10k times won't wait for 10s but
significantly longer.

Fix this by using jiffies like the rest of the code.

Fixes: 9f4a8a2d7f ("fsi/sbefifo: Add driver for the SBE FIFO")
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Link: https://lore.kernel.org/r/20200724071518.430515-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 16:06:57 +09:30
Joachim Fenkes
95152433e4 fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE
When the SBE requests a reset via the down FIFO, that is also the
FIFO we should go and reset ;)

Fixes: 9f4a8a2d7f ("fsi/sbefifo: Add driver for the SBE FIFO")
Signed-off-by: Joachim Fenkes <FENKES@de.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200724071518.430515-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 15:23:40 +09:30
Zhen Lei
56e05c60f2 fsi: master-ast-cf: Remove redundant error printing in fsi_master_acf_probe()
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.

Therefore, remove the error printing here to simplify code and reduce the
binary size.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://patchwork.ozlabs.org/project/linux-fsi/patch/20210511085745.4340-1-thunder.leizhen@huawei.com/
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 15:02:55 +09:30
Eddie James
1e2233d4f3 fsi: Aspeed: Reduce poll timeout
The lengthy timeout previously used sometimes resulted in
scheduling problems, detailed below. Therefore reduce the timeout
to 500us. This timeout selection is supported by the benchmarks
collected below with various clock dividers. This is purely the time
spent polling (reported by ktime_get()).

div  1: max:150us avg:  2us
div  2: max:155us avg:  3us
div  4: max:149us avg:  7us
div  8: max:153us avg: 13us
div 16: max:197us avg: 21us
div 32: max:181us avg: 50us
div 64: max:262us avg:100us

Jan 22 01:27:21 rain27bmc kernel: rcu: INFO: rcu_sched self-detected stall on CPU
Jan 22 01:27:21 rain27bmc kernel: rcu:         0-....: (2099 ticks this GP) idle=0ca/1/0x40000002 softirq=349573/349573 fqs=1048
Jan 22 01:27:21 rain27bmc kernel:         (t=2100 jiffies g=841149 q=7163)
Jan 22 01:27:21 rain27bmc kernel: NMI backtrace for cpu 0
Jan 22 01:27:21 rain27bmc kernel: CPU: 0 PID: 5959 Comm: ibm-read-vpd Not tainted 5.8.17-a9b4ea8 #1
Jan 22 01:27:21 rain27bmc kernel: Hardware name: Generic DT based system
Jan 22 01:27:21 rain27bmc kernel: Backtrace:
Jan 22 01:27:25 rain27bmc kernel: [<8010d92c>] (dump_backtrace) from [<8010db80>] (show_stack+0x20/0x24)
...
Jan 22 01:27:25 rain27bmc kernel: [<8010130c>] (gic_handle_irq) from [<80100b0c>] (__irq_svc+0x6c/0x90)
Jan 22 01:27:25 rain27bmc kernel: Exception stack(0xb79159b0 to 0xb79159f8)
Jan 22 01:27:25 rain27bmc kernel: 59a0:                                     9e88e5d5 00000559 00000559 00000018
Jan 22 01:27:25 rain27bmc kernel: 59c0: 00000000 9f217c55 00000003 00000559 a0201c00 bfa4d048 bfa4d000 b7915a44
Jan 22 01:27:25 rain27bmc kernel: 59e0: 40e88f8a b7915a00 3254e553 80734924 80030113 ffffffff
Jan 22 01:27:25 rain27bmc kernel:  r9:b7914000 r8:a0201c00 r7:b79159e4 r6:ffffffff r5:80030113 r4:80734924
Jan 22 01:27:25 rain27bmc kernel: [<807348b4>] (__opb_read) from [<80734d98>] (aspeed_master_read+0xbc/0xcc)
Jan 22 01:27:25 rain27bmc kernel:  r10:00000004 r9:00000002 r8:80734cdc r7:bd33fa40 r6:00000004 r5:bd33f840
Jan 22 01:27:25 rain27bmc kernel:  r4:00201c00
Jan 22 01:27:25 rain27bmc kernel: [<80734cdc>] (aspeed_master_read) from [<807320f0>] (fsi_master_read+0x6c/0x1bc)
...

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210211194846.35475-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 15:00:01 +09:30
Yangtao Li
a3469912f4 fsi: aspeed: convert to devm_platform_ioremap_resource
Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191228190631.26777-1-tiny.windzz@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 14:34:09 +09:30
Eddie James
614f0a50c9 fsi: occ: Log error for checksum failure
Log an error if the response checksum doesn't match the
calculated checksum.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210209171235.20624-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 14:29:57 +09:30
Eddie James
8a4659be08 fsi: occ: Don't accept response from un-initialized OCC
If the OCC is not initialized and responds as such, the driver
should continue waiting for a valid response until the timeout
expires.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Fixes: 7ed98dddb7 ("fsi: Add On-Chip Controller (OCC) driver")
Link: https://lore.kernel.org/r/20210209171235.20624-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 14:29:54 +09:30
Joel Stanley
f72ddbe1d7 fsi: scom: Remove retries
On a functioning FSI link there is not need to retry a write when doing
a scom in the driver.

Allow the higher layers (eg. userspace) to attempt a retry if they want,
or to accept that the address they are talking to is not accessible.

By removing the retries we can separate the error handling from retry
logic. In particular -EBUSY was used to force the get/put scom logic to
retry.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210527070109.225198-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 14:24:02 +09:30
Eddie James
a5c317dac5 fsi: scom: Reset the FSI2PIB engine for any error
The error bits in the FSI2PIB status are only cleared by a reset. So
the driver needs to perform a reset after seeing any of the FSI2PIB
errors, otherwise subsequent operations will also look like failures.

Fixes: 6b293258cd ("fsi: scom: Major overhaul")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210329151344.14246-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 14:19:48 +09:30
Joel Stanley
4134cb9165 fsi: aspeed: Emit fewer barriers in opb operations
When setting up a read or write to the OPB memory space, we must perform
five or six AHB writes. The ordering of these up until the trigger write
does not matter, so use writel_relaxed.

The generated code goes from (Debian GCC 10.2.1-6):

        mov     r8, r3
        mcr     15, 0, sl, cr7, cr10, {4}
        str     sl, [r6, #20]
        mcr     15, 0, sl, cr7, cr10, {4}
        str     r3, [r6, #24]
        mcr     15, 0, sl, cr7, cr10, {4}
        str     r1, [r6, #28]
        mcr     15, 0, sl, cr7, cr10, {4}
        str     r2, [r6, #32]
        mcr     15, 0, sl, cr7, cr10, {4}
        mov     r1, #1
        str     r1, [r6, #64]   ; 0x40
        mcr     15, 0, sl, cr7, cr10, {4}
        str     r1, [r6, #4]

to this:

        str     r3, [r7, #20]
        str     r2, [r7, #24]
        str     r1, [r7, #28]
        str     r3, [r7, #64]
        mov     r8, #0
        mcr     15, 0, r8, cr7, cr10, {4}
        str     r3, [r7, #4]

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210223041737.171274-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 14:18:17 +09:30
Colin Ian King
9108109457 fsi: core: Fix return of error values on failures
Currently the cfam_read and cfam_write functions return the provided
number of bytes given in the count parameter and not the error return
code in variable rc, hence all failures of read/writes are being
silently ignored. Fix this by returning the error code in rc.

Addresses-Coverity: ("Unused value")
Fixes: d1dcd67825 ("fsi: Add cfam char devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Link: https://lore.kernel.org/r/20210603122812.83587-1-colin.king@canonical.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 14:11:48 +09:30
Zou Wei
19a5217812 fsi: Add missing MODULE_DEVICE_TABLE
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620896249-52769-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04 14:10:45 +09:30
Linus Torvalds
0f97458173 hwmon patches for v5.11
- Driver for SB-TSI sensors
 - Add support for P10 to fsi/occ
 - Driver for LTC2992
 - Driver for Delta power supplies Q54SJ108A2
 - Support for NCT6687D added to nct6883 driver
 - Support for Intel-based Xserves added to applesmc driver
 - Driver for  Maxim MAX127
 - Support for  AMD family 19h model 01h added to amd_energy driver
 - Driver to support Corsair PSU
 - Driver for STMicroelectronics PM6764 Voltage Regulator
 - Various minor bug fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAl/X2TsACgkQyx8mb86f
 mYHZNxAAh3GROFcPxWGANUoksNMgnoiq/Wg7OE4MSVqWP3lDuMd9fNpXBSl/6p8F
 zm9SpPpgplWsoFkymYFokCNIrxE4YDajsJq4k6obOpxpqyPXTtw6g8CX0ZXA16VR
 9VH8woUpGQVUSTCeQxo7HoIx3ntwt7NyHaZt5qAXjz2Mjkd56ZJsI0MS4vwsfssO
 nqrgCOR/We/QBJ7UiV5RGSnGOU1n1GD2EQxagQ38SWd9fvkYS5LteX88kcVGl/7b
 o+ZuInhMtoyb0aN25yLCKZOKcU4W/HWCm4Mdto2wNFhCFrS902kp2/kA4gHLJ1nv
 WU4pTZsC7nagVyOTFQ+3MKMbRP9v1wVG+HZf4OTf2dEx5SdWM9BFjGLK44+5KZdS
 CvK7ckjTbkrcmxng3tCAHavlTAPfr09r45Wdh9tUvHb61anN8ZiwPdsjNJN2IKzm
 8zt+ZNLcBYHWnQkAqU2r4SrmxvcAxBbM8Vc7JDIPSExzjEtsPyizljPzkQk8WmaB
 Dk+9bPOHCtQowYgaGlu0vQsFyKHfoxekOWq1aUacuDLF94G4OIYTzhRVzhwIvBI+
 uDilaSF09/wuPqLRc0srk3QPwrLHLT0O+XD20vPWeJu09x2ysaMW1lmerd3DToV7
 BWf53c+QlhoG3hcHLsNrJxF3wtNUniw+fqdxc9s+2RK1+hCguT8=
 =YomY
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - SB-TSI sensors
   - Lineat Technology LTC2992
   - Delta power supplies Q54SJ108A2
   - Maxim MAX127
   - Corsair PSU
   - STMicroelectronics PM6764 Voltage Regulator

  New chip support:
   - P10 added to fsi/occ driver
   - NCT6687D added to nct6883 driver
   - Intel-based Xserves added to applesmc driver
   - AMD family 19h model 01h added to amd_energy driver

  And various minor bug fixes and improvements"

* tag 'hwmon-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
  dt-bindings: (hwmon/sbtsi_temp) Add SB-TSI hwmon driver bindings
  hwmon: (sbtsi) Add documentation
  hwmon: (sbtsi) Add basic support for SB-TSI sensors
  hwmon: (iio_hwmon) Drop bogus __refdata annotation
  hwmon: (xgene) Drop bogus __refdata annotation
  dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
  hwmon: (occ) Add new temperature sensor type
  fsi: occ: Add support for P10
  dt-bindings: fsi: Add P10 OCC device documentation
  dt-bindings: hwmon: convert TI ADS7828 bindings to dt-schema
  dt-bindings: hwmon: convert AD AD741x bindings to dt-schema
  dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema
  hwmon: (ltc2992) Fix less than zero comparisons with an unsigned integer
  hwmon: (pmbus/q54sj108a2) Correct title underline length
  dt-bindings: hwmon: Add documentation for ltc2992
  hwmon: (ltc2992) Add support for GPIOs.
  hwmon: (ltc2992) Add support
  hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2
  hwmon: Add driver for STMicroelectronics PM6764 Voltage Regulator
  hwmon: (nct6683) Support NCT6687D.
  ...
2020-12-15 16:06:14 -08:00
Eddie James
5ec96d74cf fsi: occ: Add support for P10
The P10 OCC has a different SRAM address for the command and response
buffers. In addition, the SBE commands to access the SRAM have changed
format. Add versioning to the driver to handle these differences.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201120010315.190737-3-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11 07:42:27 -08:00
Eddie James
dfd7f2c1c5 fsi: Aspeed: Add mutex to protect HW access
There is nothing to prevent multiple commands being executed
simultaneously. Add a mutex to prevent this.

Fixes: 606397d67f ("fsi: Add ast2600 master driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201120004929.185239-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09 19:52:25 +01:00
Joel Stanley
4a851d714e fsi: aspeed: Support CFAM reset GPIO
Systems have a line for restting the remote CFAM. This is not part of
the FSI master, but is associated with it, so it makes sense to include
it in the master driver.

This exposes a sysfs interface to reset the cfam, abstracting away the
direction and polarity of the GPIO, as well as the timing of the reset
pulse. Userspace will be blocked until the reset pulse is finished.

The reset is hard coded to be in the range of (900, 1000) us. It was
observed with a scope to regularly be just over 1ms.

If the device tree property is not preset the driver will silently
continue.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200728025527.174503-6-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:26:43 +09:30
Joel Stanley
add6895188 fsi: aspeed: Add module param for bus divisor
For testing and hardware debugging a user may wish to override the
divisor at runtime. By setting fsi_master_aspeed.bus_div=N, the divisor
will be set to N, if 0 < N <= 0x3ff.

This is a module parameter and not a device tree option as it will only
need to be set when testing or debugging.

Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20200728025527.174503-5-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:23:19 +09:30
Joel Stanley
4a80c2017b fsi: aspeed: Run the bus at maximum speed
Testing of Tacoma has shown that the ASPEED master can be run at maximum
speed.

The exception is when wired externally with a cable, in which case we
use a divisor of two to ensure reliable operation.

Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20200728025527.174503-4-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:23:17 +09:30
Joel Stanley
f369a29bdd fsi: aspeed: Support cabled FSI
Some FSI capable systems have internal FSI signals, and some have
external cabled FSI. Software can detect which machine this is by
reading a jumper GPIO, and also control which pins the signals are
routed to through a mux GPIO.

This attempts to find the GPIOs at probe time. If they are not present
in the device tree the driver will not error and continue as before.

The mux GPIO is owned by the FSI driver to ensure it is not modified at
runtime. The routing jumper obtained as non-exclusive to allow other
software to inspect it's state.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200728025527.174503-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:23:14 +09:30
Rikard Falkeborn
59165631b7 fsi: scom: Constify scom_ids
The only usage of scom_ids is to assign its address to the id_table
field in the fsi_driver struct, which is a const pointer, so make it
const to allow the compiler to put it in read-only memory

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:51 +09:30
Rikard Falkeborn
f458c38f40 fsi: sbefifo: Constify sbefifo_ids
The only usage of sbefifo_ids is to assign its address to the id_table
field in the fsi_driver struct, which is a const pointer, so make it
const to allow the compiler to put it in read-only memory

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:50 +09:30
Rikard Falkeborn
31901bb74f fsi: master: Constify hub_master_ids
The only usage of hub_master_ids is to assign its address to the
id_table field in the fsi_driver struct, which is a const pointer, so
make it const to allow the compiler to put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:50 +09:30
Eddie James
a1d5ce111a fsi: master: Remove link enable read-back
Both the Aspeed and hub masters read back the link enable register
after enabling the link, but this is unnecessary, so remove it.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:49 +09:30
Eddie James
196964a31c fsi: core: Set slave local bus ownership during init
The driver ought to claim local bus ownership of the slave it's
communicating with.

This is for multi-master setups. The slave (in theory) will deny access
to masters who try to access the CFAM address space but who don't "own"
the bus.

As driver doesn't seem to perform any other teardown there is no need to
"un-claim" ownership at teardown. Also I'm not aware of any multi-master
setup using this driver so it shouldn't actually matter. Also, the
hardware doesn't seem to enforce this despite being required in the
specification...

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:49 +09:30
Eddie James
b36875a453 fsi: core: Disable link when slave init fails
In the case that links don't have slaves or fail to be accessed, the
master should disable the link during the scan since it won't be using
the slave.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:48 +09:30
Eddie James
04635a30dd fsi: master: Add boolean parameter to link_enable function
Add the ability to disable a link with a boolean parameter to the
link_enable function. This is necessary so that the master can disable
links that it isn't using; for example, links to slaves that fail
initialization.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:47 +09:30
Xu Wang
3c3c484850 fsi: fsi-occ: fix return value check in occ_probe()
In case of error, the function platform_device_register_full()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:47 +09:30
Eddie James
6e0ef7d2ce fsi: aspeed: Enable 23-bit addressing
In order to access more than the second hub link, 23-bit addressing is
required. The core provides the highest two bits of address as the slave
ID to the master.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:46 +09:30
Colin Ian King
8a1939829f fsi: master-ast-cf: fix spelling mistake "firwmare" -> "firmware"
There is a spelling mistake in a dev_err error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10 12:22:46 +09:30
Masahiro Yamada
a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Brendan Higgins
ea3d147a47 fsi: aspeed: add unspecified HAS_IOMEM dependency
Currently CONFIG_FSI_MASTER_ASPEED=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:

ld: drivers/fsi/fsi-master-aspeed.o: in function `fsi_master_aspeed_probe':
drivers/fsi/fsi-master-aspeed.c:436: undefined reference to `devm_ioremap_resource'

Fix the build error by adding the unspecified dependency.

Fixes: 606397d67f ("fsi: Add ast2600 master driver")
Cc: stable@vger.kernel.org
Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200131034832.294268-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10 13:45:49 -08:00
Andrew Jeffery
5e50229956 fsi: aspeed: Fix OPB0 byte order register values
The data byte order selection registers in the APB2OPB primarily expose some
internal plumbing necessary to get correct write accesses onto the OPB.
OPB write cycles require "data mirroring" across the 32-bit data bus to
support variable data width slaves that don't implement "byte enables".
For slaves that do implement byte enables the master can signal which
bytes on the data bus the slave should consider valid.

The data mirroring behaviour is specified by the following table:

    +-----------------+----------+-----------------------------------+
    |                 |          |          32-bit Data Bus          |
    +---------+-------+----------+---------+---------+-------+-------+
    |         |       |          |         |         |       |       |
    |   ABus  | Mn_BE |  Request |   Dbus  |   Dbus  |  Dbus |  Dbus |
    | (30:31) | (0:3) | Transfer |   0:7   |   8:15  | 16:23 | 24:31 |
    |         |       |   Size   |  byte0  |  byte1  | byte2 | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+
    |    00   |  1111 | fullword |  byte0  |  byte1  | byte2 | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+
    |    00   |  1110 | halfword |  byte0  |  byte1  | byte2 |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    01   |  0111 |   byte   | _byte1_ |  byte1  | byte2 | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+
    |    00   |  1100 | halfword |  byte0  |  byte1  |       |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    01   |  0110 |   byte   | _byte1_ |  byte1  | byte2 |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    10   |  0011 | halfword | _byte2_ | _byte3_ | byte2 | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+
    |    00   |  1000 |   byte   |  byte0  |         |       |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    01   |  0100 |   byte   | _byte1_ |  byte1  |       |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    10   |  0010 |   byte   | _byte2_ |         | byte2 |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    11   |  0001 |   byte   | _byte3_ | _byte3_ |       | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+

Mirrored data values are highlighted by underscores in the Dbus columns.
The values in the ABus and Request Transfer Size columns correspond to
values in the field names listed in the write data order select register
descriptions.

Similar configuration registers are exposed for reads which enables the
secondary purpose of configuring hardware endian conversions. It appears the
data bus byte order is switched around in hardware so set the registers such
that we can access the correct values for all widths. The values were
determined by experimentation on hardware against fixed CFAM register
values to configure the read data order, then in combination with the
table above and the register layout documentation in the AST2600
datasheet performing write/read cycles to configure the write data order
registers.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-12-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:28:21 +01:00
Joel Stanley
913b73730e fsi: aspeed: Add trace points
These trace points help with debugging the FSI master. They show the low
level reads, writes and error states of the master.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-11-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:28:20 +01:00
Joel Stanley
606397d67f fsi: Add ast2600 master driver
The ast2600 BMC has a pair of FSI masters in it, behind an AHB to OPB
bridge.

The master driver supports reads and writes of full words, half word and
byte accesses to remote CFAMs. It can perform very basic error recovery
through resetting of the FSI port when an error is detected, and the
issuing of breaks and terms.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
--
v2:
 - remove debugging
 - squash in fixes
Link: https://lore.kernel.org/r/20191108051945.7109-10-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:28:20 +01:00
Joel Stanley
8bcd06d0cb fsi: Move defines to common header
The FSI master registers are common to the hub and AST2600 master (and
the FSP2, if someone was to upstream a driver for that).

Add defines to the fsi-master.h header, and introduce headings to
delineate the existing low level details.

Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-8-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:40 +01:00
kbuild test robot
56ec311fdd fsi: fsi_master_class can be static
There are no users outside of this file.

Fixes: 0604d53d4da8 ("fsi: Add fsi-master class")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-7-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:40 +01:00
Andrew Jeffery
9f4c2b516b fsi: core: Fix small accesses and unaligned offsets via sysfs
Subtracting the offset delta from four-byte alignment lead to wrapping
of the requested length where `count` is less than `off`. Generalise the
length handling to enable and optimise aligned access sizes for all
offset and size combinations. The new formula produces the following
results for given offset and count values:

    offset  count | length
    --------------+-------
    0       1     | 1
    0       2     | 2
    0       3     | 2
    0       4     | 4
    0       5     | 4
    1       1     | 1
    1       2     | 1
    1       3     | 1
    1       4     | 1
    1       5     | 1
    2       1     | 1
    2       2     | 2
    2       3     | 2
    2       4     | 2
    2       5     | 2
    3       1     | 1
    3       2     | 1
    3       3     | 1
    3       4     | 1
    3       5     | 1

We might need something like this for the cfam chardevs as well, for
example we don't currently implement any alignment restrictions /
handling in the hardware master driver.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-6-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:40 +01:00
Jeremy Kerr
cf700ba035 fsi: Move master attributes to fsi-master class
Populate fsi_master_class->dev_attrs with the existing attribute
definitions, so we don't need to explicitly register.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-3-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:16 +01:00
Jeremy Kerr
2e32c2d675 fsi: Add fsi-master class
This change adds a device class for FSI masters, allowing access under
/sys/class/fsi-master/, and easier udev rules.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-2-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:07 +01:00
Eddie James
8919dfcb31 fsi: scom: Don't abort operations for minor errors
The scom driver currently fails out of operations if certain system
errors are flagged in the status register; system checkstop, special
attention, or recoverable error. These errors won't impact the ability
of the scom engine to perform operations, so the driver should continue
under these conditions.
Also, don't do a PIB reset for these conditions, since it won't help.

Fixes: 6b293258cd ("fsi: scom: Major overhaul")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20190827041249.13381-1-jk@ozlabs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-28 22:59:18 +02:00
Eddie James
7ce98fb6c5 fsi: sbefifo: Don't fail operations when in SBE IPL state
SBE fifo operations should be allowed while the SBE is in any of the
"IPL" states. Operations should succeed in this state.

Fixes: 9f4a8a2d7f fsi/sbefifo: Add driver for the SBE FIFO
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/1561575415-3282-1-git-send-email-eajames@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 21:17:11 +02:00
Greg Kroah-Hartman
b9b667a0c7 FSI changes for 5.3
- Add MAINTAINERS entry. There is now a git tree and a mailing
  list/patchwork for collecting FSI patches
 
  - Bug fix for error driver registration error paths
 
  - Correction for the OCC hwmon driver to meet the spec
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl0cIIIACgkQa3ZZB4FH
 cJ6z0A//Qy3eu/+s01kq8BAThP77QRyoQP+D7oMoGpr2KxK+82MtFwsuX/vLpcsu
 rYTLn+2xPzY+dWCQx6nWaIij/dkPDWikVarW2+fdMrLhk76XwwkVXPD4J4lUHtVx
 juTWPxLmo7ZAxtwMHyE86hjLR1oTmwZ/arnXYojQ2dka1CZxqpEo7YkRPBLkGjU7
 EcXuCcIGl5ETB9drVsdA8lArLFdgfL/ZFYyEF0epc9KgYrGvJdu1ZdT6bzJkn6C3
 rkCKzQF6fZdszNpo92mjUhkyP3MnnrSVdQPRb/D5wfY9EApfj1YRWS5ikts2lrEf
 tNBat9KJ5nn2AX8FUEKuJazks5ddQk5GOLw6U4vgVayQ0gL8HqofiqybvzKvpX0S
 B0ey0u2d+GeMwiNR+QUNgrnqbbbqy9rLaW8p4zfB70v5qOP8BfWQqnSq+utSqIWZ
 M7xKcial5vQqnBTz0pw+CXVZc0SPD0O7DaK1BmCVOumMAO746eNCPQEwIQVl3Fjt
 FW00qPDWrLnRfdusBWB5mky8b79cnfLht+hLh82gFEeSXpHsRx6rG5luT7moasSK
 EmbXcMM13iVznQk+2IVWWeAXdSDo0yA0eW1SBNBHdrUrdp6jW5pLbDb/F8s+jwQK
 rNYE4IwZYM34L+E/CsFQZw3o5XQy0fsEv6/0tFjjiQPwLeZJZzI=
 =3yOz
 -----END PGP SIGNATURE-----

Merge tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next

Joel writes:

FSI changes for 5.3

 - Add MAINTAINERS entry. There is now a git tree and a mailing
 list/patchwork for collecting FSI patches

 - Bug fix for error driver registration error paths

 - Correction for the OCC hwmon driver to meet the spec

* tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
  fsi/core: Fix error paths on CFAM init
  OCC: FSI and hwmon: Add sequence numbering
  MAINTAINERS: Add FSI subsystem
2019-07-03 09:21:25 +02:00
Jeremy Kerr
371975b0b0 fsi/core: Fix error paths on CFAM init
Change d1dcd67825 re-worked the struct fsi_slave initialisation in
fsi_slave_init, but introduced a few inconsitencies: the slave->dev is
now registered through cdev_device_add, but we may kfree() the device
out from underneath the cdev registration. We may also leave an IDA
allocated.

This change fixes the error paths, so that we kfree() only before the
device is registered with the core code. We also move the smode write to
before we start creating proper devices, as it's the most likely to
fail. We also remove the IDA-allocated minor on error, and properly
clean up the of_node.

Fixes: d1dcd67825 ("fsi: Add cfam char devices")
Reported-by: Lei YU <mine260309@gmail.com>
Tested-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-03 10:42:53 +09:30
Eddie James
afd26118f0 OCC: FSI and hwmon: Add sequence numbering
Sequence numbering of the commands submitted to the OCC is required by
the OCC interface specification. Add sequence numbering and check for
the correct sequence number on the response.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-03 10:41:22 +09:30
Greg Kroah-Hartman
8083f3d788 Merge 5.2-rc6 into char-misc-next
We need the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-23 09:23:33 +02:00
Nishad Kamdar
7603eab4a5 fsi: cf-fsi-fw: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header file related to Drivers for FRU Support Interface.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 19:35:51 +02:00
Thomas Gleixner
6b99076ced treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 469
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of mergchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081202.997941624@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:11 +02:00
Thomas Gleixner
1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner
09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00