Commit graph

1008 commits

Author SHA1 Message Date
Catalin Marinas
a2c7d0667c arm64: Do not pass tagged addresses to __is_lm_address()
commit 91cb2c8b07 upstream.

Commit 519ea6f1c8 ("arm64: Fix kernel address detection of
__is_lm_address()") fixed the incorrect validation of addresses below
PAGE_OFFSET. However, it no longer allowed tagged addresses to be passed
to virt_addr_valid().

Fix this by explicitly resetting the pointer tag prior to invoking
__is_lm_address(). This is consistent with the __lm_to_phys() macro.

Fixes: 519ea6f1c8 ("arm64: Fix kernel address detection of __is_lm_address()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org> # 5.4.x
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210201190634.22942-2-catalin.marinas@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-07 15:37:13 +01:00
Nicolas Saenz Julienne
41dcfc0cb9 arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA
commit 095507dc13 upstream.

Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and
!CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The
limit will default to ~0ULL, effectively spanning the whole memory,
which is too high for a configuration that expects low memory to be
capped at 4GB.

Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit
when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour
CONFIG_ZONE_DMA32, or span the entire memory when not enabled.

Fixes: 1a8e1cef76 ("arm64: use both ZONE_DMA and ZONE_DMA32")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17 14:17:02 +01:00
Mark Rutland
2a9b3e6ac6 arm64: entry: fix EL1 debug transitions
In debug_exception_enter() and debug_exception_exit() we trace hardirqs
on/off while RCU isn't guaranteed to be watching, and we don't save and
restore the hardirq state, and so may return with this having changed.

Handle this appropriately with new entry/exit helpers which do the bare
minimum to ensure this is appropriately maintained, without marking
debug exceptions as NMIs. These are placed in entry-common.c with the
other entry/exit helpers.

In future we'll want to reconsider whether some debug exceptions should
be NMIs, but this will require a significant refactoring, and for now
this should prevent issues with lockdep and RCU.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marins <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-12-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30 12:11:38 +00:00
Mark Rutland
23529049c6 arm64: entry: fix non-NMI user<->kernel transitions
When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE
will WARN() at boot time that interrupts are enabled when we call
context_tracking_user_enter(), despite the DAIF flags indicating that
IRQs are masked.

The problem is that we're not tracking IRQ flag changes accurately, and
so lockdep believes interrupts are enabled when they are not (and
vice-versa). We can shuffle things so to make this more accurate. For
kernel->user transitions there are a number of constraints we need to
consider:

1) When we call __context_tracking_user_enter() HW IRQs must be disabled
   and lockdep must be up-to-date with this.

2) Userspace should be treated as having IRQs enabled from the PoV of
   both lockdep and tracing.

3) As context_tracking_user_enter() stops RCU from watching, we cannot
   use RCU after calling it.

4) IRQ flag tracing and lockdep have state that must be manipulated
   before RCU is disabled.

... with similar constraints applying for user->kernel transitions, with
the ordering reversed.

The generic entry code has enter_from_user_mode() and
exit_to_user_mode() helpers to handle this. We can't use those directly,
so we add arm64 copies for now (without the instrumentation markers
which aren't used on arm64). These replace the existing user_exit() and
user_exit_irqoff() calls spread throughout handlers, and the exception
unmasking is left as-is.

Note that:

* The accounting for debug exceptions from userspace now happens in
  el0_dbg() and ret_to_user(), so this is removed from
  debug_exception_enter() and debug_exception_exit(). As
  user_exit_irqoff() wakes RCU, the userspace-specific check is removed.

* The accounting for syscalls now happens in el0_svc(),
  el0_svc_compat(), and ret_to_user(), so this is removed from
  el0_svc_common(). This does not adversely affect the workaround for
  erratum 1463225, as this does not depend on any of the state tracking.

* In ret_to_user() we mask interrupts with local_daif_mask(), and so we
  need to inform lockdep and tracing. Here a trace_hardirqs_off() is
  sufficient and safe as we have not yet exited kernel context and RCU
  is usable.

* As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only
  needs to check for the latter.

* EL0 SError handling will be dealt with in a subsequent patch, as this
  needs to be treated as an NMI.

Prior to this patch, booting an appropriately-configured kernel would
result in spats as below:

| DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())
| WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0
| Modules linked in:
| CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--)
| pc : check_flags.part.54+0x1dc/0x1f0
| lr : check_flags.part.54+0x1dc/0x1f0
| sp : ffff80001003bd80
| x29: ffff80001003bd80 x28: ffff66ce801e0000
| x27: 00000000ffffffff x26: 00000000000003c0
| x25: 0000000000000000 x24: ffffc31842527258
| x23: ffffc31842491368 x22: ffffc3184282d000
| x21: 0000000000000000 x20: 0000000000000001
| x19: ffffc318432ce000 x18: 0080000000000000
| x17: 0000000000000000 x16: ffffc31840f18a78
| x15: 0000000000000001 x14: ffffc3184285c810
| x13: 0000000000000001 x12: 0000000000000000
| x11: ffffc318415857a0 x10: ffffc318406614c0
| x9 : ffffc318415857a0 x8 : ffffc31841f1d000
| x7 : 647261685f706564 x6 : ffffc3183ff7c66c
| x5 : ffff66ce801e0000 x4 : 0000000000000000
| x3 : ffffc3183fe00000 x2 : ffffc31841500000
| x1 : e956dc24146b3500 x0 : 0000000000000000
| Call trace:
|  check_flags.part.54+0x1dc/0x1f0
|  lock_is_held_type+0x10c/0x188
|  rcu_read_lock_sched_held+0x70/0x98
|  __context_tracking_enter+0x310/0x350
|  context_tracking_enter.part.3+0x5c/0xc8
|  context_tracking_user_enter+0x6c/0x80
|  finish_ret_to_user+0x2c/0x13cr

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-8-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30 12:11:38 +00:00
Anshuman Khandual
58284a901b arm64/mm: Validate hotplug range before creating linear mapping
During memory hotplug process, the linear mapping should not be created for
a given memory range if that would fall outside the maximum allowed linear
range. Else it might cause memory corruption in the kernel virtual space.

Maximum linear mapping region is [PAGE_OFFSET..(PAGE_END -1)] accommodating
both its ends but excluding PAGE_END. Max physical range that can be mapped
inside this linear mapping range, must also be derived from its end points.

This ensures that arch_add_memory() validates memory hot add range for its
potential linear mapping requirements, before creating it with
__create_pgd_mapping().

Fixes: 4ab2150615 ("arm64: Add memory hotplug support")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1605252614-761-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-13 09:45:08 +00:00
Rob Herring
96d389ca10 arm64: Add workaround for Arm Cortex-A77 erratum 1508412
On Cortex-A77 r0p0 and r1p0, a sequence of a non-cacheable or device load
and a store exclusive or PAR_EL1 read can cause a deadlock.

The workaround requires a DMB SY before and after a PAR_EL1 register
read. In addition, it's possible an interrupt (doing a device read) or
KVM guest exit could be taken between the DMB and PAR read, so we
also need a DMB before returning from interrupt and before returning to
a guest.

A deadlock is still possible with the workaround as KVM guests must also
have the workaround. IOW, a malicious guest can deadlock an affected
systems.

This workaround also depends on a firmware counterpart to enable the h/w
to insert DMB SY after load and store exclusive instructions. See the
errata document SDEN-1152370 v10 [1] for more information.

[1] https://static.docs.arm.com/101992/0010/Arm_Cortex_A77_MP074_Software_Developer_Errata_Notice_v10.pdf

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: kvmarm@lists.cs.columbia.edu
Link: https://lore.kernel.org/r/20201028182839.166037-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-10-29 12:56:01 +00:00
Joe Perches
33def8498f treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25 14:51:49 -07:00
Linus Torvalds
032c7ed958 More arm64 updates for 5.10
- Improve performance of Spectre-v2 mitigation on Falkor CPUs (if you're lucky
   enough to have one)
 
 - Select HAVE_MOVE_PMD. This has been shown to improve mremap() performance,
   which is used heavily by the Android runtime GC, and it seems we forgot to
   enable this upstream back in 2018.
 
 - Ensure linker flags are consistent between LLVM and BFD
 
 - Fix stale comment in Spectre mitigation rework
 
 - Fix broken copyright header
 
 - Fix KASLR randomisation of the linear map
 
 - Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+QEPAQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNE8jB/0YNYKO9mis/Xn5KcOCwlg4dbc2uVBknZXD
 f7otEJ6SOax2HcWz8qJlrJ+qbGFawPIqFBUAM0vU1VmoyctIoKRFTA8ACfWfWtnK
 QBfHrcxtJCh/GGq+E1IyuqWzCjppeY/7gYVdgi1xDEZRSaLz53MC1GVBwKBtu5cf
 X2Bfm8d9+PSSnmKfpO65wSCTvN3PQX1SNEHwwTWFZQx0p7GcQK1DdwoobM6dRnVy
 +e984ske+2a+nTrkhLSyQIgsfHuLB4pD6XdM/UOThnfdNxdQ0dUGn375sXP+b4dW
 7MTH9HP/dXIymTcuErMXOHJXLk/zUiUBaOxkmOxdvrhQd0uFNFIc
 =e9p9
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull more arm64 updates from Will Deacon:
 "A small selection of further arm64 fixes and updates. Most of these
  are fixes that came in during the merge window, with the exception of
  the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018
  and somehow forgot to enable upstream.

   - Improve performance of Spectre-v2 mitigation on Falkor CPUs (if
     you're lucky enough to have one)

   - Select HAVE_MOVE_PMD. This has been shown to improve mremap()
     performance, which is used heavily by the Android runtime GC, and
     it seems we forgot to enable this upstream back in 2018.

   - Ensure linker flags are consistent between LLVM and BFD

   - Fix stale comment in Spectre mitigation rework

   - Fix broken copyright header

   - Fix KASLR randomisation of the linear map

   - Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)"

Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: proton-pack: Update comment to reflect new function name
  arm64: spectre-v2: Favour CPU-specific mitigation at EL2
  arm64: link with -z norelro regardless of CONFIG_RELOCATABLE
  arm64: Fix a broken copyright header in gen_vdso_offsets.sh
  arm64: mremap speedup - Enable HAVE_MOVE_PMD
  arm64: mm: use single quantity to represent the PA to VA translation
  arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks
2020-10-23 09:46:16 -07:00
Linus Torvalds
5a32c3413d dma-mapping updates for 5.10
- rework the non-coherent DMA allocator
  - move private definitions out of <linux/dma-mapping.h>
  - lower CMA_ALIGNMENT (Paul Cercueil)
  - remove the omap1 dma address translation in favor of the common
    code
  - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
  - support per-node DMA CMA areas (Barry Song)
  - increase the default seg boundary limit (Nicolin Chen)
  - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
  - various cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IiPwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPKEQ//TM8vxjucnRl/pklpMin49dJorwiVvROLhQqLmdxw
 286ZKpVzYYAPc7LnNqwIBugnFZiXuHu8xPKQkIiOa2OtNDTwhKNoBxOAmOJaV6DD
 8JfEtZYeX5mKJ/Nqd2iSkIqOvCwZ9Wzii+aytJ2U88wezQr1fnyF4X49MegETEey
 FHWreSaRWZKa0MMRu9AQ0QxmoNTHAQUNaPc0PeqEtPULybfkGOGw4/ghSB7WcKrA
 gtKTuooNOSpVEHkTas2TMpcBp6lxtOjFqKzVN0ml+/nqq5NeTSDx91VOCX/6Cj76
 mXIg+s7fbACTk/BmkkwAkd0QEw4fo4tyD6Bep/5QNhvEoAriTuSRbhvLdOwFz0EF
 vhkF0Rer6umdhSK7nPd7SBqn8kAnP4vBbdmB68+nc3lmkqysLyE4VkgkdH/IYYQI
 6TJ0oilXWFmU6DT5Rm4FBqCvfcEfU2dUIHJr5wZHqrF2kLzoZ+mpg42fADoG4GuI
 D/oOsz7soeaRe3eYfWybC0omGR6YYPozZJ9lsfftcElmwSsFrmPsbO1DM5IBkj1B
 gItmEbOB9ZK3RhIK55T/3u1UWY3Uc/RVr+kchWvADGrWnRQnW0kxYIqDgiOytLFi
 JZNH8uHpJIwzoJAv6XXSPyEUBwXTG+zK37Ce769HGbUEaUrE71MxBbQAQsK8mDpg
 7fM=
 =Bkf/
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - rework the non-coherent DMA allocator

 - move private definitions out of <linux/dma-mapping.h>

 - lower CMA_ALIGNMENT (Paul Cercueil)

 - remove the omap1 dma address translation in favor of the common code

 - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)

 - support per-node DMA CMA areas (Barry Song)

 - increase the default seg boundary limit (Nicolin Chen)

 - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)

 - various cleanups

* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
  ARM/ixp4xx: add a missing include of dma-map-ops.h
  dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
  dma-direct: factor out a dma_direct_alloc_from_pool helper
  dma-direct check for highmem pages in dma_direct_alloc_pages
  dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
  dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
  dma-mapping: move dma-debug.h to kernel/dma/
  dma-mapping: remove <asm/dma-contiguous.h>
  dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
  dma-contiguous: remove dma_contiguous_set_default
  dma-contiguous: remove dev_set_cma_area
  dma-contiguous: remove dma_declare_contiguous
  dma-mapping: split <linux/dma-mapping.h>
  cma: decrease CMA_ALIGNMENT lower limit to 2
  firewire-ohci: use dma_alloc_pages
  dma-iommu: implement ->alloc_noncoherent
  dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
  dma-mapping: add a new dma_alloc_pages API
  dma-mapping: remove dma_cache_sync
  53c700: convert to dma_alloc_noncoherent
  ...
2020-10-15 14:43:29 -07:00
Ard Biesheuvel
7bc1a0f9e1 arm64: mm: use single quantity to represent the PA to VA translation
On arm64, the global variable memstart_addr represents the physical
address of PAGE_OFFSET, and so physical to virtual translations or
vice versa used to come down to simple additions or subtractions
involving the values of PAGE_OFFSET and memstart_addr.

When support for 52-bit virtual addressing was introduced, we had to
deal with PAGE_OFFSET potentially being outside of the region that
can be covered by the virtual range (as the 52-bit VA capable build
needs to be able to run on systems that are only 48-bit VA capable),
and for this reason, another translation was introduced, and recorded
in the global variable physvirt_offset.

However, if we go back to the original definition of memstart_addr,
i.e., the physical address of PAGE_OFFSET, it turns out that there is
no need for two separate translations: instead, we can simply subtract
the size of the unaddressable VA space from memstart_addr to make the
available physical memory appear in the 48-bit addressable VA region.

This simplifies things, but also fixes a bug on KASLR builds, which
may update memstart_addr later on in arm64_memblock_init(), but fails
to update vmemmap and physvirt_offset accordingly.

Fixes: 5383cc6efe ("arm64: mm: Introduce vabits_actual")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Link: https://lore.kernel.org/r/20201008153602.9467-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-10-15 11:14:57 +01:00
Mike Rapoport
cc6de16805 memblock: use separate iterators for memory and reserved regions
for_each_memblock() is used to iterate over memblock.memory in a few
places that use data from memblock_region rather than the memory ranges.

Introduce separate for_each_mem_region() and
for_each_reserved_mem_region() to improve encapsulation of memblock
internals from its users.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>			[x86]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	[MIPS]
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>	[.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:35 -07:00
Mike Rapoport
b10d6bca87 arch, drivers: replace for_each_membock() with for_each_mem_range()
There are several occurrences of the following pattern:

	for_each_memblock(memory, reg) {
		start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
		end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));

		/* do something with start and end */
	}

Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.

[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
  Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:35 -07:00
Mike Rapoport
c9118e6c37 arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
There are several occurrences of the following pattern:

	for_each_memblock(memory, reg) {
		start_pfn = memblock_region_memory_base_pfn(reg);
		end_pfn = memblock_region_memory_end_pfn(reg);

		/* do something with start_pfn and end_pfn */
	}

Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>	[.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:35 -07:00
Mike Rapoport
ab8f21aa8b arm64: numa: simplify dummy_numa_init()
dummy_numa_init() loops over memblock.memory and passes nid=0 to
numa_add_memblk() which essentially wraps memblock_set_node().  However,
memblock_set_node() can cope with entire memory span itself, so the loop
over memblock.memory regions is redundant.

Using a single call to memblock_set_node() rather than a loop also fixes
an issue with a buggy ACPI firmware in which the SRAT table covers some
but not all of the memory in the EFI memory map.

Jonathan Cameron says:

  This issue can be easily triggered by having an SRAT table which fails
  to cover all elements of the EFI memory map.

  This firmware error is detected and a warning printed. e.g.
  "NUMA: Warning: invalid memblk node 64 [mem 0x240000000-0x27fffffff]"
  At that point we fall back to dummy_numa_init().

  However, the failed ACPI init has left us with our memblocks all broken
  up as we split them when trying to assign them to NUMA nodes.

  We then iterate over the memblocks and add them to node 0.

  numa_add_memblk() calls memblock_set_node() which merges regions that
  were previously split up during the earlier attempt to add them to
  different nodes during parsing of SRAT.

  This means elements are moved in the memblock array and we can end up
  in a different memblock after the call to numa_add_memblk().
  Result is:

  Unable to handle kernel paging request at virtual address 0000000000003a40
  Mem abort info:
    ESR = 0x96000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [0000000000003a40] user address but active_mm is swapper
  Internal error: Oops: 96000004 [#1] PREEMPT SMP

  ...

  Call trace:
    sparse_init_nid+0x5c/0x2b0
    sparse_init+0x138/0x170
    bootmem_init+0x80/0xe0
    setup_arch+0x2a0/0x5fc
    start_kernel+0x8c/0x648

Replace the loop with a single call to memblock_set_node() to the entire
memory.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-5-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:35 -07:00
Linus Torvalds
34eb62d868 Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle them
 (include these bits into the output image vs discarding them silently)
 are both highly idiosyncratic and also version dependent.
 
 Instead of this historically problematic mess, this tree by Kees Cook (et al)
 adds build time asserts and build time warnings if there's any orphan section
 in the kernel or if a section is not sized as expected.
 
 And because we relied on so many silent assumptions in this area, fix a metric
 ton of dependencies and some outright bugs related to this, before we can
 finally enable the checks on the x86, ARM and ARM64 platforms.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Edv4RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hiKBAApdJEOaK7hMc3013DYNctklIxEPJL2mFJ
 11YJRIh4pUJTF0TE+EHT/D+rSIuRsyuoSmOQBQ61/wVSnyG067GjjVJRqh/eYaJ1
 fDhJi2FuHOjXl+CiN0KxzBjjp+V4NhF7jHT59tpQSvfZeg7FjteoxfztxaCp5ek3
 S3wHB3CC4c4jE3lfjHem1E9/PwT4kwPYx1c3gAUdEqJdjkihjX9fWusfjLeqW6/d
 Y5VkApi6bL9XiZUZj5l0dEIweLJJ86+PkKJqpo3spxxEak1LSn1MEix+lcJ8e1Kg
 sb/bEEivDcmFlFWOJnn0QLquCR0Cx5bz1pwsL0tuf0yAd4+sXX5IMuGUysZlEdKM
 BHL9h5HbevGF4BScwZwZH7lyEg7q67s5KnRu4hxy0Swfcj7y0oT/9lXqpbpZ2DqO
 Hd+bRRQKIbqnTMp0hcit9LfpLp93vj0dBlaV5ocAJJlu62u9VnwGG5HQuZ5giLUr
 kA1SLw63Y1wopFRxgFyER8les7eLsu0zxHeK44rRVlVnfI99OMTOgVNicmDFy3Fm
 AfcnfJG0BqBEJGQz5es34uQQKKBwFPtC9NztopI62KiwOspYYZyrO1BNxdOc6DlS
 mIHrmO89HMXuid5eolvLaFqUWirHoWO8TlycgZxUWVHc2txVPjAEU/axouU/dSSU
 w/6GpzAa+7g=
 =fXAw
 -----END PGP SIGNATURE-----

Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull orphan section checking from Ingo Molnar:
 "Orphan link sections were a long-standing source of obscure bugs,
  because the heuristics that various linkers & compilers use to handle
  them (include these bits into the output image vs discarding them
  silently) are both highly idiosyncratic and also version dependent.

  Instead of this historically problematic mess, this tree by Kees Cook
  (et al) adds build time asserts and build time warnings if there's any
  orphan section in the kernel or if a section is not sized as expected.

  And because we relied on so many silent assumptions in this area, fix
  a metric ton of dependencies and some outright bugs related to this,
  before we can finally enable the checks on the x86, ARM and ARM64
  platforms"

* tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  x86/boot/compressed: Warn on orphan section placement
  x86/build: Warn on orphan section placement
  arm/boot: Warn on orphan section placement
  arm/build: Warn on orphan section placement
  arm64/build: Warn on orphan section placement
  x86/boot/compressed: Add missing debugging sections to output
  x86/boot/compressed: Remove, discard, or assert for unwanted sections
  x86/boot/compressed: Reorganize zero-size section asserts
  x86/build: Add asserts for unwanted sections
  x86/build: Enforce an empty .got.plt section
  x86/asm: Avoid generating unused kprobe sections
  arm/boot: Handle all sections explicitly
  arm/build: Assert for unwanted sections
  arm/build: Add missing sections
  arm/build: Explicitly keep .ARM.attributes sections
  arm/build: Refactor linker script headers
  arm64/build: Assert for unwanted sections
  arm64/build: Add missing DWARF sections
  arm64/build: Use common DISCARDS in linker script
  arm64/build: Remove .eh_frame* sections due to unwind tables
  ...
2020-10-12 13:39:19 -07:00
Christoph Hellwig
9f4df96b87 dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
Move more nitty gritty DMA implementation details into the common
internal header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06 07:07:06 +02:00
Christoph Hellwig
0b1abd1fb7 dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06 07:07:04 +02:00
Christoph Hellwig
0a0f0d8be7 dma-mapping: split <linux/dma-mapping.h>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers.  That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06 07:07:03 +02:00
Will Deacon
baab853229 Merge branch 'for-next/mte' into for-next/core
Add userspace support for the Memory Tagging Extension introduced by
Armv8.5.

(Catalin Marinas and others)
* for-next/mte: (30 commits)
  arm64: mte: Fix typo in memory tagging ABI documentation
  arm64: mte: Add Memory Tagging Extension documentation
  arm64: mte: Kconfig entry
  arm64: mte: Save tags when hibernating
  arm64: mte: Enable swap of tagged pages
  mm: Add arch hooks for saving/restoring tags
  fs: Handle intra-page faults in copy_mount_options()
  arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset
  arm64: mte: ptrace: Add PTRACE_{PEEK,POKE}MTETAGS support
  arm64: mte: Allow {set,get}_tagged_addr_ctrl() on non-current tasks
  arm64: mte: Restore the GCR_EL1 register after a suspend
  arm64: mte: Allow user control of the generated random tags via prctl()
  arm64: mte: Allow user control of the tag check mode via prctl()
  mm: Allow arm64 mmap(PROT_MTE) on RAM-based files
  arm64: mte: Validate the PROT_MTE request via arch_validate_flags()
  mm: Introduce arch_validate_flags()
  arm64: mte: Add PROT_MTE support to mmap() and mprotect()
  mm: Introduce arch_calc_vm_flag_bits()
  arm64: mte: Tags-aware aware memcmp_pages() implementation
  arm64: Avoid unnecessary clear_user_page() indirection
  ...
2020-10-02 12:16:11 +01:00
Will Deacon
57b8b1b435 Merge branches 'for-next/acpi', 'for-next/boot', 'for-next/bpf', 'for-next/cpuinfo', 'for-next/fpsimd', 'for-next/misc', 'for-next/mm', 'for-next/pci', 'for-next/perf', 'for-next/ptrauth', 'for-next/sdei', 'for-next/selftests', 'for-next/stacktrace', 'for-next/svm', 'for-next/topology', 'for-next/tpyos' and 'for-next/vdso' into for-next/core
Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
  ACPI/IORT: Remove the unused inline functions
  ACPI/IORT: Drop the unused @ops of iort_add_device_replay()

Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
  Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
  arm64/relocate_kernel: remove redundant code

Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
  arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM

Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
  arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions

Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
  arm64/sve: Implement a helper to load SVE registers from FPSIMD state
  arm64/sve: Implement a helper to flush SVE registers
  arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
  arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
  arm64/signal: Update the comment in preserve_sve_context
  arm64/fpsimd: Update documentation of do_sve_acc

Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
  arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
  arm64: mm: Fix missing-prototypes in pageattr.c
  arm64/fpsimd: Fix missing-prototypes in fpsimd.c
  arm64: hibernate: Remove unused including <linux/version.h>
  arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
  arm64: Remove the unused include statements
  arm64: get rid of TEXT_OFFSET
  arm64: traps: Add str of description to panic() in die()

Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
  arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
  arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
  arm64/mm: Unify CONT_PMD_SHIFT
  arm64/mm: Unify CONT_PTE_SHIFT
  arm64/mm: Remove CONT_RANGE_OFFSET
  arm64/mm: Enable THP migration
  arm64/mm: Change THP helpers to comply with generic MM semantics
  arm64/mm/ptdump: Add address markers for BPF regions

Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
  arm64: Enable PCI write-combine resources under sysfs

Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
  perf: arm-cmn: Fix conversion specifiers for node type
  perf: arm-cmn: Fix unsigned comparison to less than zero
  arm_pmu: arm64: Use NMIs for PMU
  arm_pmu: Introduce pmu_irq_ops
  KVM: arm64: pmu: Make overflow handler NMI safe
  arm64: perf: Defer irq_work to IPI_IRQ_WORK
  arm64: perf: Remove PMU locking
  arm64: perf: Avoid PMXEV* indirection
  arm64: perf: Add missing ISB in armv8pmu_enable_counter()
  perf: Add Arm CMN-600 PMU driver
  perf: Add Arm CMN-600 DT binding
  arm64: perf: Add support caps under sysfs
  drivers/perf: thunderx2_pmu: Fix memory resource error handling
  drivers/perf: xgene_pmu: Fix uninitialized resource struct
  perf: arm_dsu: Support DSU ACPI devices
  arm64: perf: Remove unnecessary event_idx check
  drivers/perf: hisi: Add missing include of linux/module.h
  arm64: perf: Add general hardware LLC events for PMUv3

Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
  arm64: kprobe: clarify the comment of steppable hint instructions
  arm64: kprobe: disable probe of fault prone ptrauth instruction
  arm64: cpufeature: Modify address authentication cpufeature to exact
  arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
  arm64: traps: Allow force_signal_inject to pass esr error code
  arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions

Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
  firmware: arm_sdei: Remove _sdei_event_unregister()
  firmware: arm_sdei: Remove _sdei_event_register()
  firmware: arm_sdei: Introduce sdei_do_local_call()
  firmware: arm_sdei: Cleanup on cross call function
  firmware: arm_sdei: Remove while loop in sdei_event_unregister()
  firmware: arm_sdei: Remove while loop in sdei_event_register()
  firmware: arm_sdei: Remove redundant error message in sdei_probe()
  firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
  firmware: arm_sdei: Unregister driver on error in sdei_init()
  firmware: arm_sdei: Avoid nested statements in sdei_init()
  firmware: arm_sdei: Retrieve event number from event instance
  firmware: arm_sdei: Common block for failing path in sdei_event_create()
  firmware: arm_sdei: Remove sdei_is_err()

Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
  selftests: arm64: Add build and documentation for FP tests
  selftests: arm64: Add wrapper scripts for stress tests
  selftests: arm64: Add utility to set SVE vector lengths
  selftests: arm64: Add stress tests for FPSMID and SVE context switching
  selftests: arm64: Add test for the SVE ptrace interface
  selftests: arm64: Test case for enumeration of SVE vector lengths
  kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
  kselftests/arm64: add PAuth test for whether exec() changes keys
  kselftests/arm64: add nop checks for PAuth tests
  kselftests/arm64: add a basic Pointer Authentication test

Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
  arm64: Move console stack display code to stacktrace.c
  arm64: stacktrace: Convert to ARCH_STACKWALK
  arm64: stacktrace: Make stack walk callback consistent with generic code
  stacktrace: Remove reliable argument from arch_stack_walk() callback

Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
  arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
  arm64: mm: Pin down ASIDs for sharing mm with devices

Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
  arm64: topology: Stop using MPIDR for topology information

Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
  arm64/numa: Fix a typo in comment of arm64_numa_init
  arm64: fix some spelling mistakes in the comments by codespell

vDSO cleanups.
(Will Deacon)
* for-next/vdso:
  arm64: vdso: Fix unusual formatting in *setup_additional_pages()
  arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
2020-10-02 12:01:41 +01:00
Will Deacon
6a1bdb173f arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
Our use of broadcast TLB maintenance means that spurious page-faults
that have been handled already by another CPU do not require additional
TLB maintenance.

Make flush_tlb_fix_spurious_fault() a no-op and rely on the existing TLB
invalidation instead. Add an explicit flush_tlb_page() when making a page
dirty, as the TLB is permitted to cache the old read-only entry.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200728092220.GA21800@willie-the-truck
Signed-off-by: Will Deacon <will@kernel.org>
2020-10-01 09:45:32 +01:00
Jean-Philippe Brucker
48118151d8 arm64: mm: Pin down ASIDs for sharing mm with devices
To enable address space sharing with the IOMMU, introduce
arm64_mm_context_get() and arm64_mm_context_put(), that pin down a
context and ensure that it will keep its ASID after a rollover. Export
the symbols to let the modular SMMUv3 driver use them.

Pinning is necessary because a device constantly needs a valid ASID,
unlike tasks that only require one when running. Without pinning, we would
need to notify the IOMMU when we're about to use a new ASID for a task,
and it would get complicated when a new task is assigned a shared ASID.
Consider the following scenario with no ASID pinned:

1. Task t1 is running on CPUx with shared ASID (gen=1, asid=1)
2. Task t2 is scheduled on CPUx, gets ASID (1, 2)
3. Task tn is scheduled on CPUy, a rollover occurs, tn gets ASID (2, 1)
   We would now have to immediately generate a new ASID for t1, notify
   the IOMMU, and finally enable task tn. We are holding the lock during
   all that time, since we can't afford having another CPU trigger a
   rollover. The IOMMU issues invalidation commands that can take tens of
   milliseconds.

It gets needlessly complicated. All we wanted to do was schedule task tn,
that has no business with the IOMMU. By letting the IOMMU pin tasks when
needed, we avoid stalling the slow path, and let the pinning fail when
we're out of shareable ASIDs.

After a rollover, the allocator expects at least one ASID to be available
in addition to the reserved ones (one per CPU). So (NR_ASIDS - NR_CPUS -
1) is the maximum number of ASIDs that can be shared with the IOMMU.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-5-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-28 22:15:38 +01:00
Zhengyuan Liu
a194c5f2d2 arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
The @node passed to cpumask_of_node() can be NUMA_NO_NODE, in that
case it will trigger the following WARN_ON(node >= nr_node_ids) due to
mismatched data types of @node and @nr_node_ids. Actually we should
return cpu_all_mask just like most other architectures do if passed
NUMA_NO_NODE.

Also add a similar check to the inline cpumask_of_node() in numa.h.

Signed-off-by: Zhengyuan Liu <liuzhengyuan@tj.kylinos.cn>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20200921023936.21846-1-liuzhengyuan@tj.kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-21 22:05:01 +01:00
Will Deacon
0fdb64c2a3 arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM
When generating instructions at runtime, for example due to kernel text
patching or the BPF JIT, we can emit a trapping BRK instruction if we
are asked to encode an invalid instruction such as an out-of-range]
branch. This is indicative of a bug in the caller, and will result in a
crash on executing the generated code. Unfortunately, the message from
the crash is really unhelpful, and mumbles something about ptrace:

  | Unexpected kernel BRK exception at EL1
  | Internal error: ptrace BRK handler: f2000100 [#1] SMP

We can do better than this. Install a break handler for FAULT_BRK_IMM,
which is the immediate used to encode the "I've been asked to generate
an invalid instruction" error, and triage the faulting PC to determine
whether or not the failure occurred in the BPF JIT.

Link: https://lore.kernel.org/r/20200915141707.GB26439@willie-the-truck
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-18 16:35:54 +01:00
Tian Tao
152d75d664 arm64: mm: Fix missing-prototypes in pageattr.c
Fix the following warnings.
‘set_memory_valid’ [-Wmissing-prototypes]
int set_memory_valid(unsigned long addr, int numpages, int enable)
     ^
‘set_direct_map_invalid_noflush’ [-Wmissing-prototypes]
int set_direct_map_invalid_noflush(struct page *page)
     ^
‘set_direct_map_default_noflush’ [-Wmissing-prototypes]
int set_direct_map_default_noflush(struct page *page)
     ^

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/1600222847-56792-1-git-send-email-tiantao6@hisilicon.com
arch/arm64/mm/pageattr.c:138:5: warning: no previous prototype for
arch/arm64/mm/pageattr.c:150:5: warning: no previous prototype for
arch/arm64/mm/pageattr.c:165:5: warning: no previous prototype for
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-18 14:33:46 +01:00
Anshuman Khandual
c048ddf86c arm64/mm/ptdump: Add address markers for BPF regions
Kernel virtual region [BPF_JIT_REGION_START..BPF_JIT_REGION_END] is missing
from address_markers[], hence relevant page table entries are not displayed
with /sys/kernel/debug/kernel_page_tables. This adds those missing markers.
While here, also rename arch/arm64/mm/dump.c which sounds bit ambiguous, as
arch/arm64/mm/ptdump.c instead.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1599208259-11191-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-07 22:04:27 +01:00
Yanfei Xu
9a747c91e8 arm64/numa: Fix a typo in comment of arm64_numa_init
Fix a typo in comment of arm64_numa_init. 'encomapssing' should
be 'encompassing'.

Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Link: https://lore.kernel.org/r/20200901091154.10112-1-yanfei.xu@windriver.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-07 14:20:06 +01:00
Steven Price
36943aba91 arm64: mte: Enable swap of tagged pages
When swapping pages out to disk it is necessary to save any tags that
have been set, and restore when swapping back in. Make use of the new
page flag (PG_ARCH_2, locally named PG_mte_tagged) to identify pages
with tags. When swapping out these pages the tags are stored in memory
and later restored when the pages are brought back in. Because shmem can
swap pages back in without restoring the userspace PTE it is also
necessary to add a hook for shmem.

Signed-off-by: Steven Price <steven.price@arm.com>
[catalin.marinas@arm.com: move function prototypes to mte.h]
[catalin.marinas@arm.com: drop '_tags' from arch_swap_restore_tags()]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <will@kernel.org>
2020-09-04 12:46:07 +01:00
Catalin Marinas
738c8780fc arm64: Avoid unnecessary clear_user_page() indirection
Since clear_user_page() calls clear_page() directly, avoid the
unnecessary indirection.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
2020-09-04 12:46:06 +01:00
Vincenzo Frascino
2563776b41 arm64: mte: Tags-aware copy_{user_,}highpage() implementations
When the Memory Tagging Extension is enabled, the tags need to be
preserved across page copy (e.g. for copy-on-write, page migration).

Introduce MTE-aware copy_{user_,}highpage() functions to copy tags to
the destination if the source page has the PG_mte_tagged flag set.
copy_user_page() does not need to handle tag copying since, with this
patch, it is only called by the DAX code where there is no source page
structure (and no source tags).

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
2020-09-04 12:46:06 +01:00
Vincenzo Frascino
637ec831ea arm64: mte: Handle synchronous and asynchronous tag check faults
The Memory Tagging Extension has two modes of notifying a tag check
fault at EL0, configurable through the SCTLR_EL1.TCF0 field:

1. Synchronous raising of a Data Abort exception with DFSC 17.
2. Asynchronous setting of a cumulative bit in TFSRE0_EL1.

Add the exception handler for the synchronous exception and handling of
the asynchronous TFSRE0_EL1.TF0 bit setting via a new TIF flag in
do_notify_resume().

On a tag check failure in user-space, whether synchronous or
asynchronous, a SIGSEGV will be raised on the faulting thread.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
2020-09-04 12:46:06 +01:00
Vincenzo Frascino
3b714d24ef arm64: mte: CPU feature detection and initial sysreg configuration
Add the cpufeature and hwcap entries to detect the presence of MTE. Any
secondary CPU not supporting the feature, if detected on the boot CPU,
will be parked.

Add the minimum SCTLR_EL1 and HCR_EL2 bits for enabling MTE. The Normal
Tagged memory type is configured in MAIR_EL1 before the MMU is enabled
in order to avoid disrupting other CPUs in the CnP domain.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
2020-09-03 17:26:32 +01:00
Catalin Marinas
0178dc7613 arm64: mte: Use Normal Tagged attributes for the linear map
Once user space is given access to tagged memory, the kernel must be
able to clear/save/restore tags visible to the user. This is done via
the linear mapping, therefore map it as such. The new MT_NORMAL_TAGGED
index for MAIR_EL1 is initially mapped as Normal memory and later
changed to Normal Tagged via the cpufeature infrastructure. From a
mismatched attribute aliases perspective, the Tagged memory is
considered a permission and it won't lead to undefined behaviour.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
2020-09-03 17:26:31 +01:00
Kees Cook
b4ca91027d arm64/mm: Remove needless section quotes
Fix a case of needless quotes in __section(), which Clang doesn't like.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-9-keescook@chromium.org
2020-09-01 09:50:36 +02:00
Barry Song
c6303ab9b9 arm64: mm: reserve per-numa CMA to localize coherent dma buffers
Right now, smmu is using dma_alloc_coherent() to get memory to save queues
and tables. Typically, on ARM64 server, there is a default CMA located at
node0, which could be far away from node2, node3 etc.
with this patch, smmu will get memory from local numa node to save command
queues and page tables. that means dma_unmap latency will be shrunk much.
Meanwhile, when iommu.passthrough is on, device drivers which call dma_
alloc_coherent() will also get local memory and avoid the travel between
numa nodes.

Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-01 09:19:37 +02:00
Gustavo A. R. Silva
df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Peter Xu
6a1bb025d2 mm/arm64: use general page fault accounting
Use the general page fault accounting by passing regs into
handle_mm_fault().  It naturally solve the issue of multiple page fault
accounting when page fault retry happened.  To do this, we pass pt_regs
pointer into __do_page_fault().

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-6-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:03 -07:00
Peter Xu
bce617edec mm: do page fault accounting in handle_mm_fault
Patch series "mm: Page fault accounting cleanups", v5.

This is v5 of the pf accounting cleanup series.  It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):

  https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/

What this series did:

  - Correct page fault accounting: we do accounting for a page fault
    (no matter whether it's from #PF handling, or gup, or anything else)
    only with the one that completed the fault.  For example, page fault
    retries should not be counted in page fault counters.  Same to the
    perf events.

  - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
    event is used in an adhoc way across different archs.

    Case (1): for many archs it's done at the entry of a page fault
    handler, so that it will also cover e.g.  errornous faults.

    Case (2): for some other archs, it is only accounted when the page
    fault is resolved successfully.

    Case (3): there're still quite some archs that have not enabled
    this perf event.

    Since this series will touch merely all the archs, we unify this
    perf event to always follow case (1), which is the one that makes most
    sense.  And since we moved the accounting into handle_mm_fault, the
    other two MAJ/MIN perf events are well taken care of naturally.

  - Unify definition of "major faults": the definition of "major
    fault" is slightly changed when used in accounting (not
    VM_FAULT_MAJOR).  More information in patch 1.

  - Always account the page fault onto the one that triggered the page
    fault.  This does not matter much for #PF handlings, but mostly for
    gup.  More information on this in patch 25.

Patchset layout:

Patch 1:     Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23:  Enable the new accounting for arch #PF handlers one by one.
Patch 24:    Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25:    Cleanup GUP task_struct pointer since it's not needed any more

This patch (of 25):

This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault().  This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events.  To
do this, the pt_regs pointer is passed into handle_mm_fault().

PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.

So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com
Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:02 -07:00
Jia He
d622ecec5f mm/memory_hotplug: introduce default dummy memory_add_physaddr_to_nid()
This is to introduce a general dummy helper.  memory_add_physaddr_to_nid()
is a fallback option to get the nid in case NUMA_NO_NID is detected.

After this patch, arm64/sh/s390 can simply use the general dummy version.
PowerPC/x86/ia64 will still use their specific version.

This is the preparation to set a fallback value for dev_dax->target_node.

Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: Kaly Xin <Kaly.Xin@arm.com>
Link: http://lkml.kernel.org/r/20200710031619.18762-2-justin.he@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:57 -07:00
Mike Rapoport
c89ab04feb mm/sparse: cleanup the code surrounding memory_present()
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent
functions that call memory_present() for each region in memblock.memory:
sparse_memory_present_with_active_regions() and membocks_present().

Moreover, all architectures have a call to either of these functions
preceding the call to sparse_init() and in the most cases they are called
one after the other.

Mark the regions from memblock.memory as present during sparce_init() by
making sparse_init() call memblocks_present(), make memblocks_present()
and memory_present() functions static and remove redundant
sparse_memory_present_with_active_regions() function.

Also remove no longer required HAVE_MEMORY_PRESENT configuration option.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:27 -07:00
Anshuman Khandual
eee07935bb arm64/mm: enable vmem_altmap support for vmemmap mappings
Device memory ranges when getting hot added into ZONE_DEVICE, might
require their vmemmap mapping's backing memory to be allocated from their
own range instead of consuming system memory.  This prevents large system
memory usage for potentially large device memory ranges.  Device driver
communicates this request via vmem_altmap structure.  Architecture needs
to take this request into account while creating and tearing down vemmmap
mappings.

This enables vmem_altmap support in vmemmap_populate() and vmemmap_free()
which includes vmemmap_populate_basepages() used for ARM64_16K_PAGES and
ARM64_64K_PAGES configs.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jia He <justin.he@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1594004178-8861-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:27 -07:00
Anshuman Khandual
56993b4e14 mm/sparsemem: enable vmem_altmap support in vmemmap_alloc_block_buf()
There are many instances where vmemap allocation is often switched between
regular memory and device memory just based on whether altmap is available
or not.  vmemmap_alloc_block_buf() is used in various platforms to
allocate vmemmap mappings.  Lets also enable it to handle altmap based
device memory allocation along with existing regular memory allocations.
This will help in avoiding the altmap based allocation switch in many
places.  To summarize there are two different methods to call
vmemmap_alloc_block_buf().

vmemmap_alloc_block_buf(size, node, NULL)   /* Allocate from system RAM */
vmemmap_alloc_block_buf(size, node, altmap) /* Allocate from altmap */

This converts altmap_alloc_block_buf() into a static function, drops it's
entry from the header and updates Documentation/vm/memory-model.rst.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jia He <justin.he@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/1594004178-8861-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:27 -07:00
Anshuman Khandual
1d9cfee753 mm/sparsemem: enable vmem_altmap support in vmemmap_populate_basepages()
Patch series "arm64: Enable vmemmap mapping from device memory", v4.

This series enables vmemmap backing memory allocation from device memory
ranges on arm64.  But before that, it enables vmemmap_populate_basepages()
and vmemmap_alloc_block_buf() to accommodate struct vmem_altmap based
alocation requests.

This patch (of 3):

vmemmap_populate_basepages() is used across platforms to allocate backing
memory for vmemmap mapping.  This is used as a standard default choice or
as a fallback when intended huge pages allocation fails.  This just
creates entire vmemmap mapping with base pages (PAGE_SIZE).

On arm64 platforms, vmemmap_populate_basepages() is called instead of the
platform specific vmemmap_populate() when ARM64_SWAPPER_USES_SECTION_MAPS
is not enabled as in case for ARM64_16K_PAGES and ARM64_64K_PAGES configs.

At present vmemmap_populate_basepages() does not support allocating from
driver defined struct vmem_altmap while trying to create vmemmap mapping
for a device memory range.  It prevents ARM64_16K_PAGES and
ARM64_64K_PAGES configs on arm64 from supporting device memory with
vmemap_altmap request.

This enables vmem_altmap support in vmemmap_populate_basepages() unlocking
device memory allocation for vmemap mapping on arm64 platforms with 16K or
64K base page configs.

Each architecture should evaluate and decide on subscribing device memory
based base page allocation through vmemmap_populate_basepages().  Hence
lets keep it disabled on all archs in order to preserve the existing
semantics.  A subsequent patch enables it on arm64.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jia He <justin.he@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/1594004178-8861-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1594004178-8861-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:27 -07:00
Mike Rapoport
ca15ca406f mm: remove unneeded includes of <asm/pgalloc.h>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"

Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table.  These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.

In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>

In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.

This patch (of 8):

In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory.  Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.

As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.

The process was somewhat automated using

	sed -i -E '/[<"]asm\/pgalloc\.h/d' \
                $(grep -L -w -f /tmp/xx \
                        $(git grep -E -l '[<"]asm/pgalloc\.h'))

where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.

[rppt@linux.ibm.com: fix powerpc warning]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Linus Torvalds
47ec5303d7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...
2020-08-05 20:13:21 -07:00
Jean-Philippe Brucker
8008342853 bpf, arm64: Add BPF exception tables
When a tracing BPF program attempts to read memory without using the
bpf_probe_read() helper, the verifier marks the load instruction with
the BPF_PROBE_MEM flag. Since the arm64 JIT does not currently recognize
this flag it falls back to the interpreter.

Add support for BPF_PROBE_MEM, by appending an exception table to the
BPF program. If the load instruction causes a data abort, the fixup
infrastructure finds the exception table and fixes up the fault, by
clearing the destination register and jumping over the faulting
instruction.

To keep the compact exception table entry format, inspect the pc in
fixup_exception(). A more generic solution would add a "handler" field
to the table entry, like on x86 and s390.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200728152122.1292756-2-jean-philippe@linaro.org
2020-07-31 00:43:40 +02:00
Pingfan Liu
c4885bbb3a arm64/mm: save memory access in check_and_switch_context() fast switch path
On arm64, smp_processor_id() reads a per-cpu `cpu_number` variable,
using the per-cpu offset stored in the tpidr_el1 system register. In
some cases we generate a per-cpu address with a sequence like:

  cpu_ptr = &per_cpu(ptr, smp_processor_id());

Which potentially incurs a cache miss for both `cpu_number` and the
in-memory `__per_cpu_offset` array. This can be written more optimally
as:

  cpu_ptr = this_cpu_ptr(ptr);

Which only needs the offset from tpidr_el1, and does not need to
load from memory.

The following two test cases show a small performance improvement measured
on a 46-cpus qualcomm machine with 5.8.0-rc4 kernel.

Test 1: (about 0.3% improvement)
    #cat b.sh
    make clean && make all -j138
    #perf stat --repeat 10 --null --sync sh b.sh

    - before this patch
     Performance counter stats for 'sh b.sh' (10 runs):

                298.62 +- 1.86 seconds time elapsed  ( +-  0.62% )

    - after this patch
     Performance counter stats for 'sh b.sh' (10 runs):

               297.734 +- 0.954 seconds time elapsed  ( +-  0.32% )

Test 2: (about 1.69% improvement)
     'perf stat -r 10 perf bench sched messaging'
        Then sum the total time of 'sched/messaging' by manual.

    - before this patch
      total 0.707 sec for 10 times
    - after this patch
      totol 0.695 sec for 10 times

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/1594389852-19949-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-30 12:58:40 +01:00
Anshuman Khandual
abb7962adc arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs
Currently 'hugetlb_cma=' command line argument does not create CMA area on
ARM64_16K_PAGES and ARM64_64K_PAGES based platforms. Instead, it just ends
up with the following warning message. Reason being, hugetlb_cma_reserve()
never gets called for these huge page sizes.

[   64.255669] hugetlb_cma: the option isn't supported by current arch

This enables CMA areas reservation on ARM64_16K_PAGES and ARM64_64K_PAGES
configs by defining an unified arm64_hugetlb_cma_reseve() that is wrapped
in CONFIG_CMA. Call site for arm64_hugetlb_cma_reserve() is also protected
as <asm/hugetlb.h> is conditionally included and hence cannot contain stub
for the inverse config i.e !(CONFIG_HUGETLB_PAGE && CONFIG_CMA).

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1593578521-24672-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-15 13:38:03 +01:00
Gavin Shan
a1634a542f arm64/mm: Redefine CONT_{PTE, PMD}_SHIFT
Currently, the value of CONT_{PTE, PMD}_SHIFT is off from standard
{PAGE, PMD}_SHIFT. In turn, we have to consider adding {PAGE, PMD}_SHIFT
when using CONT_{PTE, PMD}_SHIFT in the function hugetlbpage_init().
It's a bit confusing.

This redefines CONT_{PTE, PMD}_SHIFT with {PAGE, PMD}_SHIFT included
so that the later values needn't be added when using the former ones
in function hugetlbpage_init(). Note that the values of CONT_{PTES, PMDS}
are unchanged.

Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.org/lkml/2020/5/6/190
Link: https://lore.kernel.org/r/20200630062428.194235-1-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-03 17:49:58 +01:00
Anshuman Khandual
638d503130 arm64/panic: Unify all three existing notifier blocks
Currently there are three different registered panic notifier blocks. This
unifies all of them into a single one i.e arm64_panic_block, hence reducing
code duplication and required calling sequence during panic. This preserves
the existing dump sequence. While here, just use device_initcall() directly
instead of __initcall() which has been a legacy alias for the earlier. This
replacement is a pure cleanup with no functional implications.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1593405511-7625-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-02 15:44:50 +01:00