Commit Graph

38 Commits

Author SHA1 Message Date
David Howells ee18d64c1f KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]
Add a keyctl to install a process's session keyring onto its parent.  This
replaces the parent's session keyring.  Because the COW credential code does
not permit one process to change another process's credentials directly, the
change is deferred until userspace next starts executing again.  Normally this
will be after a wait*() syscall.

To support this, three new security hooks have been provided:
cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in
the blank security creds and key_session_to_parent() - which asks the LSM if
the process may replace its parent's session keyring.

The replacement may only happen if the process has the same ownership details
as its parent, and the process has LINK permission on the session keyring, and
the session keyring is owned by the process, and the LSM permits it.

Note that this requires alteration to each architecture's notify_resume path.
This has been done for all arches barring blackfin, m68k* and xtensa, all of
which need assembly alteration to support TIF_NOTIFY_RESUME.  This allows the
replacement to be performed at the point the parent process resumes userspace
execution.

This allows the userspace AFS pioctl emulation to fully emulate newpag() and
the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to
alter the parent process's PAG membership.  However, since kAFS doesn't use
PAGs per se, but rather dumps the keys into the session keyring, the session
keyring of the parent must be replaced if, for example, VIOCSETTOK is passed
the newpag flag.

This can be tested with the following program:

	#include <stdio.h>
	#include <stdlib.h>
	#include <keyutils.h>

	#define KEYCTL_SESSION_TO_PARENT	18

	#define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0)

	int main(int argc, char **argv)
	{
		key_serial_t keyring, key;
		long ret;

		keyring = keyctl_join_session_keyring(argv[1]);
		OSERROR(keyring, "keyctl_join_session_keyring");

		key = add_key("user", "a", "b", 1, keyring);
		OSERROR(key, "add_key");

		ret = keyctl(KEYCTL_SESSION_TO_PARENT);
		OSERROR(ret, "KEYCTL_SESSION_TO_PARENT");

		return 0;
	}

Compiled and linked with -lkeyutils, you should see something like:

	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	355907932 --alswrv   4043    -1   \_ keyring: _uid.4043
	[dhowells@andromeda ~]$ /tmp/newpag
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	1055658746 --alswrv   4043  4043   \_ user: a
	[dhowells@andromeda ~]$ /tmp/newpag hello
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: hello
	340417692 --alswrv   4043  4043   \_ user: a

Where the test program creates a new session keyring, sticks a user key named
'a' into it and then installs it on its parent.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 21:29:22 +10:00
David Howells d0420c83f3 KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]
Implement TIF_NOTIFY_RESUME for most of those architectures in which isn't yet
available, and, whilst we're at it, have it call the appropriate tracehook.

After this patch, blackfin, m68k* and xtensa still lack support and need
alteration of assembly code to make it work.

Resume notification can then be used (by a later patch) to install a new
session keyring on the parent of a process.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

cc: linux-arch@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 21:29:19 +10:00
Ralf Baechle dbda6ac089 MIPS: CVE-2009-0029: Enable syscall wrappers.
Thanks to David Daney helping with debugging and testing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
2009-02-27 17:56:35 +00:00
Ralf Baechle 21a151d8ca [MIPS] checkfiles: Fix "need space after that ','" errors.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:15 +01:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Atsushi Nemoto faea623464 [MIPS] Retry {save,restore}_fp_context if failed in atomic context.
The save_fp_context()/restore_fp_context() might sleep on accessing
user stack and therefore might lose FPU ownership in middle of them.

If these function failed due to "in_atomic" test in do_page_fault,
touch the sigcontext area in non-atomic context and retry these
save/restore operation.

This is a replacement of a (broken) fix which was titled "Allow CpU
exception in kernel partially".

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-20 14:58:37 +01:00
Atsushi Nemoto 5323180db7 [MIPS] Disallow CpU exception in kernel again.
The commit 4d40bff7110e9e1a97ff8c01bdd6350e9867cc10 ("Allow CpU
exception in kernel partially") was broken.  The commit was to fix
theoretical problem but broke usual case.  Revert it for now.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-20 14:58:37 +01:00
Atsushi Nemoto 53dc80287d [MIPS] FPU ownership management & preemption fixes
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-17 01:03:26 +00:00
Atsushi Nemoto c6a2f46793 [MIPS] Check FCSR for pending interrupts, alternative version
Commit 6d6671066a is incomplete and misses
non-r4k CPUs.  This patch reverts the commit and fixes in other way.

 o Do FCSR checking in caller of restore_fp_context.
 o Send SIGFPE if the signal handler set any FPU exception bits.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-17 01:03:25 +00:00
Franck Bui-Huu 9693a85378 [MIPS] Add basic SMARTMIPS ASE support
This patch adds trivial support for SMARTMIPS extension. This extension
is currently implemented by 4KS[CD] CPUs.

Basically it saves/restores ACX register, which is part of the SMARTMIPS
ASE, when needed. This patch does *not* add any support for Smartmips MMU
features.

Futhermore this patch does not add explicit support for 4KS[CD] CPUs since
they are respectively mips32 and mips32r2 compliant.  So with the current
processor configuration, a platform that has such CPUs needs to select
both configs:

	CPU_HAS_SMARTMIPS
	SYS_HAS_CPU_MIPS32_R[12]

This is due to the processor configuration which is mixing up all the
architecture variants and the processor types.

The drawback of this, is that we currently pass '-march=mips32' option to
gcc when building a kernel instead of '-march=4ksc' for 4KSC case. This
can lead to a kernel image a little bit bigger than required.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-22 00:50:44 +00:00
Ralf Baechle 151fd6acd9 [MIPS] signals: Share even more code.
native and compat do_signal and handle_signal are identical and can easily
be unified.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-18 21:31:35 +00:00
Franck Bui-Huu 24c556e99e [MIPS] signals: make common _BLOCKABLE macro
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:51 +00:00
Ralf Baechle 6668058346 [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:50 +00:00
Franck Bui-Huu e692eb30ff [MIPS] signal: do not inline handle_signal()
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-10 22:38:48 +00:00
Franck Bui-Huu f90080a059 [MIPS] signal: do not use save_static_function() anymore
This macro was used to save static registers before calling
sys_sigsuspend() and sys_sigreturn().

For the sys_sigreturn() case, there's no point to save them
since they have been already saved by setup_sigcontext()
before calling the signal handler.

For the sys_sigsuspend() case, I don't see any reasons...

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-10 22:38:48 +00:00
Franck Bui-Huu 722bb63de6 [MIPS] signal: factorize debug code
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-10 22:38:46 +00:00
Franck Bui-Huu 601dde45f6 [MIPS] signal: test return value of install_sigtramp()
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-10 22:38:46 +00:00
Franck Bui-Huu c0b9bae9d1 [MIPS] signal: clean up sigframe structure
This patch makes 'struct sigframe' declaration avalaible for all signals
code. It allows signal32 to not have its own declaration.

This patch also removes all ICACHE_REFILLS_WORKAROUND_WAR tests in
structure declaration and hopefully make them more readable.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-10 22:38:45 +00:00
Franck Bui-Huu c3fc4ab36d [MIPS] signal: do not inline functions in signal-common.h
These functions are quite big and there are no points to make
them inlined. So this patch moves the functions implementation
in signal.c and make them available for others source files
which need them.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-10 22:38:45 +00:00
Ralf Baechle e0daad449c [MIPS] Whitespace cleanups.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:19 +00:00
Ralf Baechle 13fdd31abe [MIPS] Avoid double signal restarting.
In entry.S resume_userspace ... jal do_notify_resume form a loop through
which the kernel will iterate as long as work is pending.  If we
iterate through this loop more than once with no signal pending for at
least one but the last iteration we will take do the syscall restarting
multiple times resulting in a syscall return prior to the the syscall
instruction in userspace.  This may happen when debugging a multithreaded
program.

Debugging and original fix by Maciej; extended to other ABIs by me.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27 13:37:33 +01:00
Ralf Baechle 45887e12f2 [MIPS] Add missing returns in signal code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27 13:37:32 +01:00
Ralf Baechle 048c6140c0 [MIPS] Don't call try_to_freeze in do_signal & co.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27 13:37:30 +01:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Atsushi Nemoto 9c6031cc93 [MIPS] Signal cleanup
Move function prototypes to asm/signal.h to detect trivial errors and
add some __user tags to get rid of sparse warnings.  Generated code
should not be changed.
    
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-21 13:27:46 +00:00
Ralf Baechle 40ac5d479b [MIPS] Make do_signal return void.
It's return value is ignored everywhere.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2006-02-08 17:52:25 +00:00
Ralf Baechle 7b3e2fc847 [MIPS] Add support for TIF_RESTORE_SIGMASK.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2006-02-08 17:52:24 +00:00
Atsushi Nemoto 5665a0ac59 [MIPS] Fix minor sparse warnings
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:26 +00:00
Atsushi Nemoto 9bbf28a36c [MIPS] Sparse: Add some __user tags to signal functions.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:25 +00:00
Ralf Baechle 85b0549602 [MIPS] Avoid duplicate do_syscall_trace calls on return from sigreturn.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-12-01 11:05:18 +00:00
Atsushi Nemoto 16cd395136 Fix return type of setup_frame variants
Since 2.6.13-rc1 setup_frame and its variants return int.  But some bits
were missed in the conversion.
    
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-07 18:05:39 +00:00
Ralf Baechle 129bc8f78b Setup_frame is now returning a success value.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:41 +01:00
Ralf Baechle 02416dcf5a Redo RM9000 workaround which along with other DSP ASE changes was
causing some headache for debuggers knowing about signal frames.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:23 +01:00
Ralf Baechle e50c0a8fa6 Support the MIPS32 / MIPS64 DSP ASE.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:17 +01:00
Ralf Baechle fe00f943e0 Sparseify MIPS.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:50 +01:00
Steven Rostedt 69be8f1896 [PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it.  I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.

The way NODEFER affects signals on other Unix boxes is as follows:

1) If NODEFER is set, other signals in sa_mask are still blocked.

2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).

The way NODEFER affects signals on Linux:

1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).

2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.

The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.

Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.

* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux.  So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 10:03:11 -07:00
Yoichi Yuasa d4b3a80e39 [PATCH] mips: fixed try_to_freeze build error
arch/mips/kernel/signal.c: In function 'do_signal':
arch/mips/kernel/signal.c:460: error: too many arguments to function 'try_to_freeze'

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:42 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00