Highlights:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio
- thinkpad_acpi: AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
- video: Change how we determine if brightness key-presses are handled
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- mlxreg-io: Fix contact info
Drop the PMC_ATOM Kconfig option:
- Drop the PMC_ATOM Kconfig option
EDAC, pnd2:
- convert to use common P2SB accessor
- Use proper I/O accessors and address space annotation
HID:
- surface-hid: Add support for hot-removal
ISST:
- PUNIT device mapping with Sub-NUMA clustering
Kconfig:
- Remove unnecessary "if X86"
MAINTAINERS:
- repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans:
- Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans
Move AMD platform drivers to separate directory:
- Move AMD platform drivers to separate directory
acer-wmi:
- Use backlight helper
acer_wmi:
- Cleanup Kconfig selects
apple-gmux:
- Use backlight helper
asus-wmi:
- Add mic-mute LED classdev support
- Add key mappings
compal-laptop:
- Use backlight helper
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
hp-wmi:
- Ignore Sanitization Mode event
i2c:
- i801: convert to use common P2SB accessor
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
leds:
- simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
- simatic-ipc-leds: Convert to use P2SB accessor
mfd:
- lpc_ich: Add support for pinctrl in non-ACPI system
- lpc_ich: Switch to generic p2sb_bar()
- lpc_ich: Factor out lpc_ich_enable_spi_write()
mlx-platform:
- Add COME board revision register
- Add support for new system XH3000
- Introduce support for COMe NVSwitch management module for Vulcan chassis
- Add support for systems equipped with two ASICs
- Add cosmetic changes for alignment
- Make activation of some drivers conditional
p2sb:
- Move out of X86_PLATFORM_DEVICES dependency
panasonic-laptop:
- Use acpi_video_get_backlight_type()
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
pinctrl:
- intel: Check against matching data instead of ACPI companion
platform/mellanox:
- mlxreg-lc: Fix error flow and extend verbosity
- mlxreg-io: Add locking for io operations
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/olpc:
- Fix uninitialized data in debugfs write
platform/surface:
- gpe: Add support for 13" Intel version of Surface Laptop 4
- tabletsw: Fix __le32 integer access
- Update copyright year of various drivers
- aggregator: Move subsystem hub drivers to their own module
- aggregator: Move device registry helper functions to core module
- aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio
- aggregator_registry: Add support for tablet mode switch on Surface Pro 8
- Add KIP/POS tablet-mode switch driver
- aggregator: Add helper macros for requests with argument and return value
- aggregator: Reserve more event- and target-categories
- avoid flush_scheduled_work() usage
- aggregator_registry: Add support for keyboard cover on Surface Pro 8
- aggregator_registry: Add KIP device hub
- aggregator_registry: Change device ID for base hub
- aggregator_registry: Generify subsystem hub functionality
- aggregator: Add comment for KIP subsystem category
- aggregator_registry: Use client device wrappers for notifier registration
- aggregator: Allow notifiers to avoid communication on unregistering
- aggregator: Allow devices to be marked as hot-removed
- aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/dell:
- Kconfig: Remove unnecessary "depends on X86_PLATFORM_DEVICES"
platform/x86/intel:
- Add Primary to Sideband (P2SB) bridge support
platform/x86/intel/ifs:
- Mark as BROKEN
platform/x86/intel/pmt:
- telemetry: Fix fixed region handling
platform/x86/intel/vsec:
- Fix wrong type for local status variables
- Add PCI error recovery support to Intel PMT
- Add support for Raptor Lake
- Rework early hardware code
pmc_atom:
- Fix comment typo
- Match all Lex BayTrail boards with critclk_systems DMI table
power/supply:
- surface_battery: Use client device wrappers for notifier registration
- surface_charger: Use client device wrappers for notifier registration
serial-multi-instantiate:
- Sort ACPI IDs by HID
- Get rid of redundant 'else'
- Use while (i--) pattern to clean up
- Improve dev_err_probe() messaging
- Drop duplicate check
- Improve autodetection
simatic-ipc:
- drop custom P2SB bar code
sony-laptop:
- Remove useless comparisons in sony_pic_read_possible_resource()
system76_acpi:
- Use dev_get_drvdata
thinkpad_acpi:
- Enable AMT by default on supported systems
- Add support for hotkey 0x131a
- Add support for automatic mode transitions
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
- Replace custom str_on_off() etc
- Sort headers for better maintenance
- Use backlight helper
tools/power/x86/intel-speed-select:
- Remove unneeded semicolon
- Fix off by one check
watchdog:
- simatic-ipc-wdt: convert to use P2SB accessor
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLrndEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zeMgf7BjSCz6ZA8SSY1i8QHDTvdjySihHJ
j07Gn3j1T/5G00R/r6viMDE4PxcYvMAPXjq3azepKQd8H5kGfE323SA6fgWFPAvi
P2OvEfvWfI5S8FYGYPBkNP2MjQ5MFe7qzLEh3+wQH0ocJ7WRCi457B4Xvtd2gWI3
dHj5gMSWC3O5xNa2S4Mg3dnD9uJlwhX+FNjWIuRy8eh5+DikgByyC4B+uW6WtO5e
t0rmIm6q5wUzB7dIetJLoAQwrcpYAOkK7L33G9h/7knWAfiJfklaKTbftnoxbDSv
iGWODkLDyob4C48DmVusS6WMEhPUzl/R33+tk6LjVt/YOYOP030EMtCECQ==
=Krhc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Commit 4d5c5bad51 ("powerpc: Remove asm/prom.h from asm/mpc52xx.h
and asm/pci.h") that cleans up powerpc's asm/prom.h leads to build
errors in ppc4xx_edac.c due to missing header. Include required
header directly to avoid the build failure.
Fixes: 4d5c5bad51 ("powerpc: Remove asm/prom.h from asm/mpc52xx.h and asm/pci.h")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/993f5a7da371458cb819b5f3f569073c78523b01.1659436180.git.christophe.leroy@csgroup.eu
A subsequent commit to cleanup powerpc's asm/prom.h leads to build
errors in mpc85xx_edac.c due to missing headers. Include all required
headers directly to avoid the build failure.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The commit
cb51a371d0 ("EDAC/ghes: Setup DIMM label from DMI and use it in error reports")
enforced that both the bank and device strings passed to
dimm_setup_label() are not NULL.
However, there are BIOSes, for example on a
HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019
which don't populate both strings:
Handle 0x0020, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x0013
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 32 GB
Form Factor: DIMM
Set: None
Locator: PROC 1 DIMM 1 <===== device
Bank Locator: Not Specified <===== bank
This results in a buffer overflow because ghes_edac_register() calls
strlen() on an uninitialized label, which had non-zero values left over
from krealloc_array():
detected buffer overflow in __fortify_strlen
------------[ cut here ]------------
kernel BUG at lib/string_helpers.c:983!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G I 5.18.6-200.fc36.x86_64 #1
Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019
RIP: 0010:fortify_panic
...
Call Trace:
<TASK>
ghes_edac_register.cold
ghes_probe
platform_probe
really_probe
__driver_probe_device
driver_probe_device
__driver_attach
? __device_attach_driver
bus_for_each_dev
bus_add_driver
driver_register
acpi_ghes_init
acpi_init
? acpi_sleep_proc_init
do_one_initcall
The label contains garbage because the commit in Fixes reallocs the
DIMMs array while scanning the system but doesn't clear the newly
allocated memory.
Change dimm_setup_label() to always initialize the label to fix the
issue. Set it to the empty string in case BIOS does not provide both
bank and device so that ghes_edac_register() can keep the default label
given by edac_mc_alloc_dimms().
[ bp: Rewrite commit message. ]
Fixes: b9cae27728 ("EDAC/ghes: Scan the system once on driver init")
Co-developed-by: Robert Richter <rric@kernel.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Robert Elliott <elliott@hpe.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220719220124.760359-1-toshi.kani@hpe.com
zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after
an interrupt for a {un-,}correctable error is raised, which disables
the error interrupts. Then the interrupt handler will be called only
once. Therefore, re-enable the error interrupt line at the end of
intr_handler() for v3.x Synopsys EDAC DDR.
Fixes: f7824ded41 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@nxp.com
v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the
ECC Clear Register to disable the error interrupts instead.
Fixes: f7824ded41 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427015137.8406-2-sherry.sun@nxp.com
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
The driver uses rather voodoo kind of castings and I/O accessors.
Replace it with proper __iomem annotation and readl()/readq() calls.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Based on the normalized pattern:
this file is licensed under the terms of the gnu general public
license version 2 this program is licensed as is without any warranty
of any kind whether express or implied
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Remove function export
- Correct asm constraint
- Fix __setup handlers retval
-----BEGIN PGP SIGNATURE-----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=/WGB
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
"A variety of fixes which don't fit any other tip bucket:
- Remove unnecessary function export
- Correct asm constraint
- Fix __setup handlers retval"
* tag 'x86_misc_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
x86: Fix return value of __setup handlers
x86/delay: Fix the wrong asm constraint in delay_loop()
x86/amd_nb: Unexport amd_cache_northbridges()
the code considerably this way
- Rip out the silly edac_align_ptr() contraption which was computing the
size of the private structures of each driver and thus allowing for a
one-shot memory allocation. This was clearly unnecessary and confusing
so switch to simple and boring kmalloc* calls.
- Last but not least, the usual garden variety of fixes, cleanups and
improvements all over EDAC land
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLRJkACgkQEsHwGGHe
VUorYQ//a3s/j1wIXB5J0q7c9xlumqhxJz9P2A42kZMEW6MR94Ovr2lDnN6FRN5z
dlLLn/fxjh3El084jaKrfhHHyB0Z78Qte/Caf4E3HVuhmZ2dQw58vXAm3TNMsiPz
DEnJrRJ/vuX/VEcuuvX9wwSovPqNINW4lb9cWcIfGPToX051coUvuxTQXmCO80Hd
2syv88S0a8tw94E6DeB+5hhAQdgdV2dK3rZChTNi1guDqHqv14E6oQowWe6+Dvq/
XGBbJtmjuWsh2ZtS1KDnGYO0jvzLxe/5kjdgXYUoftG30MVTkVV0pBk0G+lPQQBN
2nSLd9zEgSceB5SlNlfWtQQuL1I56q3chxT7mj5JBPRsqQmV6Rxg9E0jnyiUH6Cf
Q9btDizjU7vUpDKe1Y8fJEMR3nXTIK58AnjcDmTZIu5hVZFY2nYnql0txClmkTUE
Bffud97C7a8uiSECp6oS5vjQHK12xwqiD8KRIaAHlBDYnpqTOJw/mDoKUvV74yiJ
TRvvPAiPgoA5ZLLkCFKxA7IzFXtgz9HL7m/MbbBo63ed187qvMyBxcyb8Teih/iy
u6eK0W1fux+zEaS6q5Jp0v415aqVvoa0UHgImTlOJhBaWENlEQixHslFMaqnlDTV
yhG405KxxMgW9/L9nI4kqP827zIr4iXJCVg3rJsOdytEzfwWy2o=
=Hwmn
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Switch ghes_edac to use the CPER error reporting routines and
simplify the code considerably this way
- Rip out the silly edac_align_ptr() contraption which was computing
the size of the private structures of each driver and thus allowing
for a one-shot memory allocation. This was clearly unnecessary and
confusing so switch to simple and boring kmalloc* calls.
- Last but not least, the usual garden variety of fixes, cleanups and
improvements all over EDAC land
* tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix typo processsors -> processors
EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id()
EDAC: Use kcalloc()
EDAC/ghes: Change ghes_hw from global to static
EDAC/armada_xp: Use devm_platform_ioremap_resource()
EDAC/synopsys: Add a SPDX identifier
EDAC/synopsys: Add driver support for i.MX platforms
EDAC/dmc520: Don't print an error for each unconfigured interrupt line
EDAC/mc: Get rid of edac_align_ptr()
EDAC/device: Sanitize edac_device_alloc_ctl_info() definition
EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info()
EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info()
EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc()
efi/cper: Reformat CPER memory error location to more readable
EDAC/ghes: Unify CPER memory error location reporting
efi/cper: Add a cper_mem_err_status_str() to decode error description
powerpc/85xx: Remove fsl,85... bindings
Combine all collected EDAC changes for submission into v5.19:
* edac-misc:
EDAC/xgene: Fix typo processsors -> processors
EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id()
EDAC/ghes: Change ghes_hw from global to static
EDAC/armada_xp: Use devm_platform_ioremap_resource()
EDAC/synopsys: Add a SPDX identifier
EDAC/synopsys: Add driver support for i.MX platforms
EDAC/dmc520: Don't print an error for each unconfigured interrupt line
efi/cper: Reformat CPER memory error location to more readable
EDAC/ghes: Unify CPER memory error location reporting
efi/cper: Add a cper_mem_err_status_str() to decode error description
powerpc/85xx: Remove fsl,85... bindings
* edac-alloc-cleanup:
EDAC: Use kcalloc()
EDAC/mc: Get rid of edac_align_ptr()
EDAC/device: Sanitize edac_device_alloc_ctl_info() definition
EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info()
EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info()
EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc()
Signed-off-by: Borislav Petkov <bp@suse.de>
Smatch reports this issue
ghes_edac.c:44:3: warning: symbol 'ghes_hw' was not declared. Should it be static?
ghes_hw is used only in ghes_edac.c so change its storage-class
specifier to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220421135319.1508754-1-trix@redhat.com
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately. Make the
code simpler without functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jan Luebbe <jlu@pengutronix.de>
Link: https://lore.kernel.org/r/20220421084621.2615517-1-lv.ruyi@zte.com.cn
i.MX8MP use Synopsys v3.70a DDR controller IP so add support for it with
the Synopsys driver.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220428023209.18087-1-sherry.sun@nxp.com
The dmc520 driver requires that at least one interrupt line, out of the
ten possible, is configured. The driver prints an error and returns
-EINVAL from its .probe function if there are no interrupt lines
configured.
Don't print a KERN_ERR level message for each interrupt line that's
unconfigured as that can confuse users into thinking that there is an
error condition.
Before this change, the following KERN_ERR level messages would be
reported if only dram_ecc_errc and dram_ecc_errd were configured in the
device tree:
dmc520 68000000.dmc: IRQ ram_ecc_errc not found
dmc520 68000000.dmc: IRQ ram_ecc_errd not found
dmc520 68000000.dmc: IRQ failed_access not found
dmc520 68000000.dmc: IRQ failed_prog not found
dmc520 68000000.dmc: IRQ link_err not
dmc520 68000000.dmc: IRQ temperature_event not found
dmc520 68000000.dmc: IRQ arch_fsm not found
dmc520 68000000.dmc: IRQ phy_request not found
Fixes: 1088750d78 ("EDAC: Add EDAC driver for DMC520")
Reported-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220111163800.22362-1-tyhicks@linux.microsoft.com
Currently, the error count is read wrongly from the status register. Read
the count from the proper error count register (ERRCNT).
[ bp: Massage. ]
Fixes: b500b4a029 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
Use boring kzalloc() instead. Add pointers to the different allocated
members in struct edac_device_ctl_info for easier freeing later.
One of the reasons, perhaps, why it was done this way is to be able to
do a single kfree(ctl_info) without having to kfree() the other parts of
the struct too but that is not nearly a sensible reason as to why there
should be this obscure pointer alignment.
There should be no functional changes resulting from this.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220310095254.1510-4-bp@alien8.de
This has probably meant something at some point but there's no need for
it anymore - the struct mem_ctl_info allocation can happen with normal,
boring k*alloc() calls like everyone else does it.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220310095254.1510-2-bp@alien8.de
Switch the GHES EDAC memory error reporting functions to use the common
CPER ones and get rid of code duplication.
[ bp:
- rewrite commit message, remove useless text
- rip out useless reformatting
- align function params on the opening brace
- rename function to a more descriptive name
- drop useless function exports
- handle buffer lengths properly when printing other detail
- remove useless casting
]
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220308144053.49090-3-xueshuai@linux.alibaba.com
Since
8a4ab218ef ("powerpc/85xx: Change deprecated binding for 85xx-based boards")
those bindings are not used anymore.
A comment in drivers/edac/mpc85xx_edac.c say they are to be removed
with kernel 2.6.30.
Remove them now.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Scott Wood <oss@buserror.net>
Link: https://lore.kernel.org/r/82a8bc4450a4daee50ee5fada75621fecb3703ff.1648721299.git.christophe.leroy@csgroup.eu
amd_cache_northbridges() is exported by amd_nb.c and is called by
amd64-agp.c and amd64_edac.c modules at module_init() time so that NB
descriptors are properly cached before those drivers can use them.
However, the init_amd_nbs() initcall already does call
amd_cache_northbridges() unconditionally and thus makes sure the NB
descriptors are enumerated.
That initcall is a fs_initcall type which is on the 5th group (starting
from 0) of initcalls that gets run in increasing numerical order by the
init code.
The module_init() call is turned into an __initcall() in the MODULE=n
case and those are device-level initcalls, i.e., group 6.
Therefore, the northbridges caching is already finished by the time
module initialization starts and thus the correct initialization order
is retained.
Unexport amd_cache_northbridges(), update dependent modules to
call amd_nb_num() instead. While at it, simplify the checks in
amd_cache_northbridges().
[ bp: Heavily massage and *actually* explain why the change is ok. ]
Signed-off-by: Muralidhara M K <muralimk@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324122729.221765-1-nchatrad@amd.com
A bug in legacy U-Boot causes a crash during SDRAM boot if ECC is not
enabled in the bitstream but enabled in the Linux config.
Memory mapped read of the ECC Enabled bit was only enabled if U-Boot
determined ECC was enabled in the bitstream.
The Linux driver checks the ECC enable bit using a memory map read.
In the ECC disabled bitstream case, U-Boot didn't enable ECC register
memory map reads and since they are not allowed this results in a crash.
Always read the ECC Enable register through a SMC call which is always
allowed and it works with legacy and current U-Boot.
[ bp: Massage commit message. ]
Signed-off-by: Rabara Niravkumar L <niravkumar.l.rabara@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220305014118.4794-1-niravkumar.l.rabara@intel.com
Introduce a "family flags" bitmask that can be used to indicate any
special behavior needed on a per-family basis.
Add a flag to indicate a system uses the new register offsets introduced
with Family 19h Model 10h.
Use this flag to account for register offset changes, a new bitfield
indicating DDR5 use on a memory controller, and to set the proper number
of chip select masks.
Rework f17_addr_mask_to_cs_size() to properly handle the change in chip
select masks. And update code comments to reflect the updated Chip
Select, DIMM, and Mask relationships.
[uninitialized variable warning]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: William Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20220202144307.2678405-3-yazen.ghannam@amd.com
Current AMD systems allow mixing of DIMM types within a system. However,
DIMMs within a channel, i.e. managed by a single Unified Memory
Controller (UMC), must be of the same type.
Handle this possible configuration by checking and setting the memory
type for each individual "UMC" structure.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: William Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20220202144307.2678405-2-yazen.ghannam@amd.com
Do alignment logic properly and use the "ptr" local variable for
calculating the remainder of the alignment.
This became an issue because struct edac_mc_layer has a size that is not
zero modulo eight, and the next offset that was prepared for the private
data was unaligned, causing an alignment exception.
The patch in Fixes: which broke this actually wanted to "what we
actually care about is the alignment of the actual pointer that's about
to be returned." But it didn't check that alignment.
Use the correct variable "ptr" for that.
[ bp: Massage commit message. ]
Fixes: 8447c4d15e ("edac: Do alignment logic properly in edac_align_ptr()")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com
The driver overrides error codes returned by platform_get_irq_optional()
to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.
[ bp: Massage commit message. ]
Fixes: 0d4429301c ("EDAC: Add APM X-Gene SoC EDAC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru
The driver overrides the error codes returned by platform_get_irq() to
-ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.
[ bp: Massage commit message. ]
Fixes: 71bcada88b ("edac: altera: Add Altera SDRAM EDAC support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the edac sysfs code to use default_groups field which has
been the preferred way since
aa30f47cf6 ("kobject: Add support for default attribute groups to kobj_type")
so that the obsolete default_attrs field can be removed soon.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220104112401.1067148-2-gregkh@linuxfoundation.org
The EDAC sysfs code is doing some crazy casting of the list of
attributes that is not necessary at all. Instead, properly point to the
correct attribute structure in the lists, which removes the need to
cast anything and the code is now properly typesafe (as much as sysfs
attribute logic is typesafe...)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220104112401.1067148-1-gregkh@linuxfoundation.org
- Add support for DRR5 and new models 0x10-0x1f and 0x50-0x5f of AMD
family 0x19 CPUs to amd64_edac
- The usual set of fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=85ZE
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for version 3 of the Synopsys DDR controller to
synopsys_edac
- Add support for DRR5 and new models 0x10-0x1f and 0x50-0x5f of AMD
family 0x19 CPUs to amd64_edac
- The usual set of fixes and cleanups
* tag 'edac_updates_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Add support for family 19h, models 50h-5fh
EDAC/sb_edac: Remove redundant initialization of variable rc
RAS/CEC: Remove a repeated 'an' in a comment
EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh
EDAC: Add RDDR5 and LRDDR5 memory types
EDAC/sifive: Fix non-kernel-doc comment
dt-bindings: memory: Add entry for version 3.80a
EDAC/synopsys: Enable the driver on Intel's N5X platform
EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR
EDAC/synopsys: Use the quirk for version instead of ddr version
arch/x86/ to amd64_edac as that is its only user anyway
- Some MCE error injection improvements to the AMD side
- Reorganization of the #MC handler code and the facilities it calls to
make it noinstr-safe
- Add support for new AMD MCA bank types and non-uniform banks layout
- The usual set of cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=8Hu7
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
"A relatively big amount of movements in RAS-land this time around:
- First part of a series to move the AMD address translation code
from arch/x86/ to amd64_edac as that is its only user anyway
- Some MCE error injection improvements to the AMD side
- Reorganization of the #MC handler code and the facilities it calls
to make it noinstr-safe
- Add support for new AMD MCA bank types and non-uniform banks layout
- The usual set of cleanups and fixes"
* tag 'ras_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/mce: Reduce number of machine checks taken during recovery
x86/mce/inject: Avoid out-of-bounds write when setting flags
x86/MCE/AMD, EDAC/mce_amd: Support non-uniform MCA bank type enumeration
x86/MCE/AMD, EDAC/mce_amd: Add new SMCA bank types
x86/mce: Check regs before accessing it
x86/mce: Mark mce_start() noinstr
x86/mce: Mark mce_timed_out() noinstr
x86/mce: Move the tainting outside of the noinstr region
x86/mce: Mark mce_read_aux() noinstr
x86/mce: Mark mce_end() noinstr
x86/mce: Mark mce_panic() noinstr
x86/mce: Prevent severity computation from being instrumented
x86/mce: Allow instrumentation during task work queueing
x86/mce: Remove noinstr annotation from mce_setup()
x86/mce: Use mce_rdmsrl() in severity checking code
x86/mce: Remove function-local cpus variables
x86/mce: Do not use memset to clear the banks bitmaps
x86/mce/inject: Set the valid bit in MCA_STATUS before error injection
x86/mce/inject: Check if a bank is populated before injecting
x86/mce: Get rid of cpu_missing
...
On systems without HBM (High Bandwidth Memory) mdev/mbase are not
released/unmapped.
Add the code to release mdev/mbase when failing to detect HBM.
[Tony: re-word commit message]
Cc: <stable@vger.kernel.org>
Fixes: c945088384 ("EDAC/i10nm: Add support for high bandwidth memory")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20211224091126.1246-1-qiuxu.zhuo@intel.com
Add the new family 19h models 50h-5fh PCI IDs (device 18h functions 0
and 6) to support Ryzen 5000 APUs ("Cezanne").
Signed-off-by: Marc Bevand <m@zorinaq.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20211221233112.556927-1-m@zorinaq.com
AMD systems currently lay out MCA bank types such that the type of bank
number "i" is either the same across all CPUs or is Reserved/Read-as-Zero.
For example:
Bank # | CPUx | CPUy
0 LS LS
1 RAZ UMC
2 CS CS
3 SMU RAZ
Future AMD systems will lay out MCA bank types such that the type of
bank number "i" may be different across CPUs.
For example:
Bank # | CPUx | CPUy
0 LS LS
1 RAZ UMC
2 CS NBIO
3 SMU RAZ
Change the structures that cache MCA bank types to be per-CPU and update
smca_get_bank_type() to handle this change.
Move some SMCA-specific structures to amd.c from mce.h, since they no
longer need to be global.
Break out the "count" for bank types from struct smca_hwid, since this
should provide a per-CPU count rather than a system-wide count.
Apply the "const" qualifier to the struct smca_hwid_mcatypes array. The
values in this array should not change at runtime.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211216162905.4132657-3-yazen.ghannam@amd.com
Add HWID and McaType values for new SMCA bank types, and add their error
descriptions to edac_mce_amd.
The "PHY" bank types all have the same error descriptions, and the NBIF
and SHUB bank types have the same error descriptions. So reuse the same
arrays where appropriate.
[ bp: Remove useless comments over hwid types. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211216162905.4132657-2-yazen.ghannam@amd.com
The variable rc is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and thus remove
it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211126221848.1125321-1-colin.i.king@gmail.com
Add a new family type for AMD Family 19h Models 10h to 1Fh. Use this new
family type for Models A0h to AFh also.
Increase the maximum number of controllers from 8 to 12.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208174356.1997855-3-yazen.ghannam@amd.com
scripts/kernel-doc complains about a comment that begins with "/**"
but is not in kernel-doc format, so correct it.
Prevents this warning:
drivers/edac/sifive_edac.c:23: warning: This comment starts with '/**', \
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* EDAC error callback
Fixes: 91abaeaaff ("EDAC/sifive: Add EDAC platform driver for SiFive SoCs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211201030913.10283-1-rdunlap@infradead.org
Intel's N5X platform is also using the Synopsys EDAC controller.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20211012190709.1504152-3-dinguyen@kernel.org
Add support for version 3.80a of the Synopsys DDR controller. This
version of the controller has the following differences:
- UE/CE are auto cleared
- Interrupts are supported by default
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20211012190709.1504152-2-dinguyen@kernel.org
Version 2.40a supports DDR_ECC_INTR_SUPPORT for a quirk, so use that
quirk to determine a call to setup_address_map().
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20211012190709.1504152-1-dinguyen@kernel.org
Define an address translation context struct. This will hold values that
will be passed between multiple functions.
Save return address, Node ID, and the Instance ID number to start.
Currently, the UMC number is used as the Instance ID, but future DF
versions may use another value.
Also include a "tmp" field to use when reading registers. This is to
avoid having to define a temporary variable in multiple functions.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211028175728.121452-5-yazen.ghannam@amd.com
The DF Indirect Access method allows for "Broadcast" accesses in which
case no specific instance is targeted. Add support using a reserved
instance ID of 0xFF to indicate a broadcast access. Set the FICAA
register appropriately.
Define helpers functions for instance and broadcast reads and use them
where appropriate.
Drop the "amd_" prefix since these functions are all static.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211028175728.121452-4-yazen.ghannam@amd.com
present on AMD zen2 servers
- The usual fixes and cleanups all over EDAC land
-----BEGIN PGP SIGNATURE-----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=O0zA
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
"A small pile of EDAC updates which the autumn wind blew my way. :)
- amd64_edac: Add support for three-rank interleaving mode which is
present on AMD zen2 servers
- The usual fixes and cleanups all over EDAC land"
* tag 'edac_updates_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
EDAC/ti: Remove redundant error messages
EDAC/amd64: Handle three rank interleaving mode
EDAC/mc_sysfs: Print MC-scope sysfs counters unsigned
EDAC/al_mc: Make use of the helper function devm_add_action_or_reset()
EDAC/mc: Replace strcpy(), sprintf() and snprintf() with strscpy() or scnprintf()
The number of correctable errors is displayed as uncorrectable
errors because the "SBE" error count is passed to both calls of
edac_mc_handle_error().
Pass the correct uncorrectable error count to the second
edac_mc_handle_error() call when logging uncorrectable errors.
[ bp: Massage commit message. ]
Fixes: 7f6998a412 ("ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC")
Signed-off-by: Hans Potsch <hans.potsch@nokia.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20211006121332.58788-1-hans.potsch@nokia.com
The computation of TOHM is off by one bit. This missed bit results in
too low a value for TOHM, which can cause errors in regular memory to
incorrectly report:
EDAC MC0: 1 CE Error at MMIOH area, on addr 0x000000207fffa680 on any memory
Fixes: 50d1bb9367 ("sb_edac: add support for Haswell based systems")
Cc: stable@vger.kernel.org
Reported-by: Meeta Saggi <msaggi@purestorage.com>
Signed-off-by: Eric Badger <ebadger@purestorage.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20211010170127.848113-1-ebadger@purestorage.com
In the function ti_edac_probe(), devm_ioremap_resource() and
platform_get_irq() already issue error messages when they fail so remove
the redundant error messages in the EDAC driver.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210811112626.27848-1-tangbin@cmss.chinamobile.com
AMD Rome systems and later support interleaving between three identical
ranks within a channel.
Check for this mode by counting the number of enabled chip selects and
comparing their masks. If there are exactly three enabled chip selects
and their masks are identical, then three rank interleaving is enabled.
The size of a rank is determined from its mask value. However, three
rank interleaving doesn't follow the method of swapping an interleave
bit with the most significant bit. Rather, the interleave bit is flipped
and the most significant bit remains the same. There is only a single
interleave bit in this case.
Account for this when determining the chip select size by keeping the
most significant bit at its original value and ignoring any zero bits.
This will return a full bitmask in [MSB:1].
Fixes: e53a3b267f ("EDAC/amd64: Find Chip Select memory size using Address Mask")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211005154419.2060504-1-yazen.ghannam@amd.com
This is cosmetically nicer for counts > INT32_MAX, and aligns the
MC-scope format with that of the lower layer sysfs counter files.
Signed-off-by: Eric Badger <ebadger@purestorage.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20211003181653.GA685515@ebadger-ThinkPad-T590
The helper function devm_add_action_or_reset() will internally call
devm_add_action(), and if devm_add_action() fails then it will
execute the action mentioned and return the error code. So use
devm_add_action_or_reset() instead of devm_add_action() to simplify the
error handling, reduce the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Talel Shenhar <talel@amazon.com>
Link: https://lkml.kernel.org/r/20210922125924.321-1-caihuoqing@baidu.com
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehavior. The safe replacement is strscpy().
[1][2]
However, to simplify and clarify the code, to concatenate labels use the
scnprintf() function. This way it is not necessary to check the return
value of strscpy() (-E2BIG if the parameter count is 0 or the src was
truncated) since scnprintf() always returns the number of chars written
into the buffer. This function always returns a nul-terminated string
even if it needs to be truncated.
While at it, fix all other broken string generation code that wrongly
interprets snprintf()'s return code or just uses sprintf(), implement
that using scnprintf() here too. Drop breaks in loops around
scnprintf() as it is safe now to loop.
Moreover, the check is not needed: for the case when the buffer is
exhausted, len never gets zero because scnprintf() takes the full buffer
length as input parameter, but excludes the trailing '\0' in its return
code and thus, 1 is the minimum len.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
[2] https://github.com/KSPP/linux/issues/88
[ rric: Replace snprintf() with scnprintf(), rework sprintf() user,
drop breaks in loops around scnprintf(), introduce 'end' pointer to
reduce pointer arithmetic, use prefix pattern for e->location,
adjust subject and description ]
Co-developed-by: Joe Perches <joe@perches.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210903150539.7282-1-len.baker@gmx.com
Core changes:
- The usual set of small fixes and improvements all over the place, but nothing
outstanding
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts
of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=qyll
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
to the Intel SKx drivers
- Print additional useful per-channel error information on i10nm, like on SKL
- Check whether the AMD decoder is loaded on a guest and if so, don't
- The usual round of fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=JYRz
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
"The usual EDAC stuff which managed to trickle in for 5.15:
- Add new HBM2 (High Bandwidth Memory Gen 2) type and add support for
it to the Intel SKx drivers
- Print additional useful per-channel error information on i10nm,
like on SKL
- Don't load the AMD EDAC decoder in virtual images
- The usual round of fixes and cleanups"
* tag 'edac_updates_for_v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i10nm: Retrieve and print retry_rd_err_log registers
EDAC/i10nm: Fix NVDIMM detection
EDAC/skx_common: Set the memory type correctly for HBM memory
EDAC/altera: Skip defining unused structures for specific configs
EDAC/mce_amd: Do not load edac_mce_amd module on guests
EDAC/mc: Add new HBM2 memory type
EDAC/amd64: Use DEVICE_ATTR helper macros
Retrieve and print retry_rd_err_log registers like the earlier change:
commit e80634a75a ("EDAC, skx: Retrieve and print retry_rd_err_log registers")
This is a little trickier than on Skylake because of potential
interference with BIOS use of the same registers. The default
behavior is to ignore these registers.
A module parameter retry_rd_err_log(default=0) controls the mode of operation:
- 0=off : Default.
- 1=bios : Linux doesn't reset any control bits, but just reports values.
This is "no harm" mode, but it may miss reporting some data.
- 2=linux: Linux tries to take control and resets mode bits,
clears valid/UC bits after reading. This should be
more reliable (especially if BIOS interference is reduced
by disabling eMCA reporting mode in BIOS setup).
Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210818175701.1611513-3-tony.luck@intel.com
MCDDRCFG is a per-channel register and uses bit{0,1} to indicate
the NVDIMM presence on DIMM slot{0,1}. Current i10nm_edac driver
wrongly uses MCDDRCFG as per-DIMM register and fails to detect
the NVDIMM.
Fix it by reading MCDDRCFG as per-channel register and using its
bit{0,1} to check whether the NVDIMM is populated on DIMM slot{0,1}.
Fixes: d4dc89d069 ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Reported-by: Fan Du <fan.du@intel.com>
Tested-by: Wen Jin <wen.jin@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210818175701.1611513-2-tony.luck@intel.com
The Altera EDAC driver has several features conditionally built
depending on Kconfig options. The edac_device_prv_data structures
are conditionally used in of_device_id tables. They reference other
functions and structures which can be defined as __maybe_unused.
Silence build warnings like:
drivers/edac/altera_edac.c:643:37: warning:
‘altr_edac_device_inject_fops’ defined but not used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20210601092704.203555-1-krzysztof.kozlowski@canonical.com
Hypervisors likely do not expose the SMCA feature to the guest and
loading this module leads to false warnings. This module should not be
loaded in guests to begin with, but people tend to do so, especially
when testing kernels in VMs. And then they complain about those false
warnings.
Do the practical thing and do not load this module when running as a
guest to avoid all that complaining.
[ bp: Rewrite commit message. ]
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lkml.kernel.org/r/20210628172740.245689-1-Smita.KoralahalliChannabasappa@amd.com
Add a new entry to 'enum mem_type' and a new string to 'edac_mem_types[]'
for HBM2 (High Bandwidth Memory Gen 2) new memory type.
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Muralidhara M K <muralimk@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210630152828.162659-4-nchatrad@amd.com
Instead of "open coding" DEVICE_ATTR, use the corresponding
helper macros DEVICE_ATTR_{RW,RO,WO} in amd64_edac.c
Some function names needed to be changed to match the device
conventions <foo>_show and <foo>_store, but the functionality
itself is unchanged.
The devices using EDAC_DCT_ATTR_SHOW() are left unchanged.
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210713065130.2151-1-dwaipayanray1@gmail.com
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Clean up error messages from thunderx_edac
- Add MODULE_DEVICE_TABLE to ti_edac so it will autoload
- Use %pR to print resources in aspeed_edac
- Add Yazen Ghannam as MAINTAINER for AMD edac drivers
- Fix Ice Lake and Sapphire Rapids drivers to report correct
"near" or "far" device for errors in 2LM configurations
- Add support of on package high bandwidth memory in Sapphire Rapids
- New CPU support for three CPUs supporting in-band ECC (IOT SKUs for
ICL-NNPI, Tiger Lake and Alder Lake)
- Don't even try to load Intel EDAC drivers when running as a guest
- Fix Kconfig dependency on X86_MCE_INTEL for EDAC_IGEN6
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQW3WBGcnu5yJnSXn0kTJLX0iGMLAUCYNujCRQcdG9ueS5sdWNr
QGludGVsLmNvbQAKCRAkTJLX0iGMLCazAPsHoGc9ymStw0hL06Lw71Va/3VyqiUZ
ha1OTWXCcV42UgD/QlwhKkHC3UkEI1dTEAI6McXcC88s8+yXQ8fKAPeQyQw=
=iTWK
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Tony Luck:
"Various fixes and support for new CPUs:
- Clean up error messages from thunderx_edac
- Add MODULE_DEVICE_TABLE to ti_edac so it will autoload
- Use %pR to print resources in aspeed_edac
- Add Yazen Ghannam as MAINTAINER for AMD edac drivers
- Fix Ice Lake and Sapphire Rapids drivers to report correct "near"
or "far" device for errors in 2LM configurations
- Add support of on package high bandwidth memory in Sapphire Rapids
- New CPU support for three CPUs supporting in-band ECC (IOT SKUs for
ICL-NNPI, Tiger Lake and Alder Lake)
- Don't even try to load Intel EDAC drivers when running as a guest
- Fix Kconfig dependency on X86_MCE_INTEL for EDAC_IGEN6"
* tag 'edac_updates_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: fix core dependency
EDAC/Intel: Do not load EDAC driver when running as a guest
EDAC/igen6: Add Intel Alder Lake SoC support
EDAC/igen6: Add Intel Tiger Lake SoC support
EDAC/igen6: Add Intel ICL-NNPI SoC support
EDAC/i10nm: Add support for high bandwidth memory
EDAC/i10nm: Add detection of memory levels for ICX/SPR servers
EDAC/skx_common: Add new ADXL components for 2-level memory
MAINTAINERS: Make Yazen Ghannam maintainer for EDAC-AMD64
EDAC/aspeed: Use proper format string for printing resource
EDAC/ti: Add missing MODULE_DEVICE_TABLE
EDAC/thunderx: Remove irrelevant variable from error messages
igen6_edac needs mce_register()/unregister() functions,
so it should depend on X86_MCE (or X86_MCE_INTEL).
That change prevents these build errors:
ld: drivers/edac/igen6_edac.o: in function `igen6_remove':
igen6_edac.c:(.text+0x494): undefined reference to `mce_unregister_decode_chain'
ld: drivers/edac/igen6_edac.o: in function `igen6_probe':
igen6_edac.c:(.text+0xf5b): undefined reference to `mce_register_decode_chain'
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210619160203.2026-1-rdunlap@infradead.org
There's little to no point in loading an EDAC driver running in a guest:
1) The CPU model reported by CPUID may not represent actual h/w
2) The hypervisor likely does not pass in access to memory controller devices
3) Hypervisors generally do not pass corrected error details to guests
Add a check in each of the Intel EDAC drivers for X86_FEATURE_HYPERVISOR
and simply return -ENODEV in the init routine.
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210615174419.GA1087688@agluck-desk2.amr.corp.intel.com
Alder Lake SoC shares the same memory controller and In-Band ECC
(IBECC) IP with Tiger Lake SoC. Like Tiger Lake, it also has two
memory controllers each associated one IBECC instance. The minor
differences include the MMIO offset of each memory controller and
the type of memory error address logged in the IBECC.
So add Alder Lake compute die IDs, adjust the MMIO offset for each
memory controller and handle the type of memory error address logged
in the IBECC for Alder Lake EDAC support.
Tested-by: Vrukesh V Panse <vrukesh.v.panse@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-7-tony.luck@intel.com
Tiger Lake SoC shares the same memory controller and In-Band ECC
(IBECC) IP with Elkhart Lake SoC. The main differences are that Tiger
Lake has two memory controllers each associated with one IBECC and
uses Machine Check for the memory error notification.
So add Tiger Lake compute die IDs, MCE decoding chain registration,
and memory slice decoding for Tiger Lake EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-6-tony.luck@intel.com
The Ice Lake Neural Network Processor for Deep Learning Inference
(ICL-NNPI) SoC shares the same memory controller and In-Band ECC with
Elkhart Lake SoC. Add the ICL-NNPI compute die IDs for EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-5-tony.luck@intel.com
A future Xeon processor will include in-package HBM (high bandwidth
memory). The in-package HBM memory controller shares the same
architecture with the regular DDR memory controller.
Add the HBM memory controller devices for EDAC support.
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-4-tony.luck@intel.com
Current i10nm_edac driver is only for system configured in 1-level
memory. If the system is configured in 2-level memory, the driver
doesn't report the 1st level memory DIMM for the error address, even
if the error occurs in the 1st level memory.
Both Ice Lake servers and Sapphire Rapids servers can be configured
in 2-level memory. Add detection of memory levels to i10nm_edac for
the two kinds of servers so that the driver can report the 2nd level
memory DIMM or the 1st level memory DIMM according to error source.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-3-tony.luck@intel.com
Some Intel servers may configure memory in 2 levels, using
fast "near" memory (e.g. DDR) as a cache for larger, slower,
"far" memory (e.g. 3D X-point).
In these configurations the BIOS ADXL address translation for
an address in a 2-level memory range will provide details of
both the "near" and far components.
Current exported ADXL components are only for 1-level memory
system or for 2nd level memory of 2-level memory system. So
add new ADXL components for 1st level memory of 2-level memory
system to fully support 2-level memory system and the detection
of memory error source(1st level memory or 2nd level memory).
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210611170123.1057025-2-tony.luck@intel.com
There is an uppercase letter I in one of the MCE error descriptions
instead of a lowercase one. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20210603103349.79117-1-colin.king@canonical.com
Add the (HWID, MCATYPE) tuples and names for new SMCA bank types.
Also, add their respective error descriptions to the MCE decoding module
edac_mce_amd. Also while at it, optimize the string names for some SMCA
banks.
[ bp: Drop repeated comments, explain why UMC_V2 is a separate entry. ]
Signed-off-by: Muralidhara M K <muralimk@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20210526164601.66228-1-nchatrad@amd.com
On ARMv7, resource_size_t can be 64-bit, which breaks printing
it as %x:
drivers/edac/aspeed_edac.c: In function 'init_csrows':
drivers/edac/aspeed_edac.c:257:28: error: format '%x' expects argument of \
type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long \
long unsigned int'} [-Werror=format=]
257 | dev_dbg(mci->pdev, "dt: /memory node resources: first page \
r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
Use the special %pR format string to pretty-print the entire resource
instead.
Fixes: edfc2d73ca ("EDAC/aspeed: Add support for AST2400 and AST2600")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lkml.kernel.org/r/20210421135500.3518661-1-arnd@kernel.org
The module misses MODULE_DEVICE_TABLE() for of_device_id tables and thus
never autoloads on ID matches.
Add the missing declaration.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tero Kristo <kristo@kernel.org>
Link: https://lkml.kernel.org/r/20210512033727.26701-1-cuibixuan@huawei.com
The SYSCFG MSR continued being updated beyond the K8 family; drop the K8
name from it.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-4-brijesh.singh@amd.com
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only
one for both of them. This the common practice for other platforms.
Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come
from multiple vendors.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
amd64_edac was converted to CPU family autoprobing (from PCI device
IDs) to not have to add a new PCI device ID each time a new platform is
shipped but to support the whole family out-of-the-box.
However, this caused a lot of noise in dmesg even when the machine
doesn't have ECC DIMMs or ECC has been disabled in the BIOS:
EDAC MC: Ver: 3.0.0
EDAC amd64: F17h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h detected (node 1).
EDAC amd64: Node 1: DRAM ECC disabled.
EDAC amd64: F17h detected (node 2).
EDAC amd64: Node 2: DRAM ECC disabled.
EDAC amd64: F17h detected (node 3).
EDAC amd64: Node 3: DRAM ECC disabled.
EDAC amd64: F17h detected (node 4).
EDAC amd64: Node 4: DRAM ECC disabled.
EDAC amd64: F17h detected (node 5).
EDAC amd64: Node 5: DRAM ECC disabled.
EDAC amd64: F17h detected (node 6).
EDAC amd64: Node 6: DRAM ECC disabled.
EDAC amd64: F17h detected (node 7).
EDAC amd64: Node 7: DRAM ECC disabled.
or even
$ grep EDAC dmesg.log | sed 's/\[.*\] //' | sort | uniq -c
128 EDAC amd64: F17h detected (node 0).
128 EDAC amd64: Node 0: DRAM ECC disabled.
1 EDAC MC: Ver: 3.0.0
on a big machine. Yap, that's once per CPU for 128 of them.
So move the init messages after all probing has succeeded to avoid
unnecessary spew in dmesg.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210119164141.17417-1-bp@alien8.de
Coccinelle reports a redundant error print in xgene_edac_probe() because
platform_get_irq() will already print an error message when it is unable
to get an IRQ.
Use platform_get_irq_optional() instead which avoids the error message
and keep the driver-specific one.
[ bp: Sanitize commit message. ]
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Robert Richter <rric@kernel.org>
Link: https://lkml.kernel.org/r/20210112103540.7818-1-dong.menglong@zte.com.cn
Families up to and including 0x16 allow access to the injection
hardware. Starting with family 0x17, access to those registers is
blocked by security policy.
Limit that only on the families which support it.
Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201222180013.GD13463@zn.tnic
Merge them into the main driver and put them inside an EDAC_DEBUG
ifdeffery to simplify the driver and have all debugging/injection stuff
behind a debug build-time switch.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20201215110517.5215-2-bp@alien8.de
There's no need for them to be in a separate file so merge them into the
main driver compilation unit like the other EDAC drivers do.
Drop now-unneeded function export, make the function static and shorten
static function names.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20201215110517.5215-1-bp@alien8.de
Give these messages a debug severity as they are really only useful to
the module developers.
Also, drop the "(broken BIOS?)" phrase, since this can cause churn for
BIOS folks. The PCI IDs needed by the module, at least on modern systems,
are fixed in hardware.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201215170131.8496-1-Yazen.Ghannam@amd.com
Those were only laptops and are very very unlikely to have ECC memory.
Currently, when the driver attempts to load, it issues:
EDAC amd64: Error: F1 not found: device 0x1601 (broken BIOS?)
because the PCI device is the wrong one (it uses the F15h default one).
So do not load the driver on them as that is pointless.
Reported-by: Don Curtis <bugrprt21882@online.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Don Curtis <bugrprt21882@online.de>
Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1179763
Link: https://lkml.kernel.org/r/20201218160622.20146-1-bp@alien8.de
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
code to use it (Yazen Ghannam)
- Remove a dead and unused TSEG region remapping workaround on AMD (Arvind Sankar)
-----BEGIN PGP SIGNATURE-----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=RsCs
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
"Only AMD-specific changes this time:
- Save the AMD physical die ID into cpuinfo_x86.cpu_die_id and
convert all code to use it (Yazen Ghannam)
- Remove a dead and unused TSEG region remapping workaround on AMD
(Arvind Sankar)"
* tag 'x86_cpu_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Remove dead code for TSEG region remapping
x86/topology: Set cpu_die_id only if DIE_TYPE found
EDAC/mce_amd: Use struct cpuinfo_x86.cpu_die_id for AMD NodeId
x86/CPU/AMD: Remove amd_get_nb_id()
x86/CPU/AMD: Save AMD NodeId as cpu_die_id
The mv64x60 EDAC driver depends on CONFIG_MV64X60. But that symbol is
not user-selectable, and the last code that selected it was removed
with the C2K board support in 2018, see:
92c8c16f34 ("powerpc/embedded6xx: Remove C2K board support")
That means the driver is now dead code, so remove it.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201207040253.628528-1-mpe@ellerman.id.au
In order to setup its PCI component, the driver needs any node private
instance in order to get a reference to the PCI device and hand that
into edac_pci_create_generic_ctl(). For convenience, it uses the 0th
memory controller descriptor under the assumption that if any, the 0th
will be always present.
However, this assumption goes wrong when the 0th node doesn't have
memory and the driver doesn't initialize an instance for it:
EDAC amd64: F17h detected (node 0).
...
EDAC amd64: Node 0: No DIMMs detected.
But looking up node instances is not really needed - all one needs is
the pointer to the proper device which gets discovered during instance
init.
So stash that pointer into a variable and use it when setting up the
EDAC PCI component.
Clear that variable when the driver needs to unwind due to some
instances failing init to avoid any registration imbalance.
Cc: <stable@vger.kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201122150815.13808-1-bp@alien8.de
The Sapphire Rapids CPU model shares the same memory controller
architecture with Ice Lake server. There are some configurations
different from Ice Lake server as below:
- The device ID for configuration agent.
- The size for per channel memory-mapped I/O.
- The DDR5 memory support.
So add the above configurations and the Sapphire Rapids CPU model
ID for EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Add a new entry to 'enum mem_type' and a new string to
'edac_mem_types[]' for DDR5 new memory type.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Instead of raw access, use readl() to access MMIO registers of
memory controller to avoid possible compiler re-ordering.
Fixes: d4dc89d069 ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Cc: <stable@vger.kernel.org>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Add debugfs support to fake memory correctable errors to test the
error reporting path and the error address decoding logic in the
igen6_edac driver.
Please note that the fake errors are also reported to EDAC core and
then the CE counter in EDAC sysfs is also increased.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This driver supports Intel client SoC with integrated memory controller
using In-Band ECC(IBECC). The memory correctable and uncorrectable errors
are reported via NMIs. The driver handles the NMIs and decodes the memory
error address to platform specific address. The first IBECC-supported SoC
is Elkhart Lake.
[Tony: s/#include <linux/nmi.h>/#include <asm/nmi.h>/ to fix randconfig build]
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The edac_mce_amd module calls decode_dram_ecc() on AMD Family17h and
later systems. This function is used in amd64_edac_mod to do
system-specific decoding for DRAM ECC errors. The function takes a
"NodeId" as a parameter.
In AMD documentation, NodeId is used to identify a physical die in a
system. This can be used to identify a node in the AMD_NB code and also
it is used with umc_normaddr_to_sysaddr().
However, the input used for decode_dram_ecc() is currently the NUMA node
of a logical CPU. In the default configuration, the NUMA node and
physical die will be equivalent, so this doesn't have an impact.
But the NUMA node configuration can be adjusted with optional memory
interleaving modes. This will cause the NUMA node enumeration to not
match the physical die enumeration. The mismatch will cause the address
translation function to fail or report incorrect results.
Use struct cpuinfo_x86.cpu_die_id for the node_id parameter to ensure the
physical ID is used.
Fixes: fbe63acf62 ("EDAC, mce_amd: Use cpu_to_node() to find the node ID")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201109210659.754018-4-Yazen.Ghannam@amd.com
The Last Level Cache ID is returned by amd_get_nb_id(). In practice,
this value is the same as the AMD NodeId for callers of this function.
The NodeId is saved in struct cpuinfo_x86.cpu_die_id.
Replace calls to amd_get_nb_id() with the logical CPU's cpu_die_id and
remove the function.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201109210659.754018-3-Yazen.Ghannam@amd.com
Return the error value if the inject sysfs file creation fails, rather
than returning 0, to signal to the upper layer that the ->probe function
failed.
[ bp: Massage. ]
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20201116135810.3130845-1-zhangxiaoxu5@huawei.com
There are {Low-Power DDR3/4, WIO2} types of memory.
Add new entries to 'enum mem_type' and new strings to
'edac_mem_types[]' for the new types.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
They have been spreading around the subsystem by example so remove them
all.
Reported-by: Raymond Bennett <raymond.bennett@gmail.com>
Suggested-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
- Preliminary RISC-V enablement - the bulk of it will arrive via the RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config table
rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot#### variable
contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we can
identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available but
returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZNI8
-----END PGP SIGNATURE-----
Merge tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI changes from Ingo Molnar:
- Preliminary RISC-V enablement - the bulk of it will arrive via the
RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config
table rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot####
variable contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
can identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available
but returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
efi: mokvar: add missing include of asm/early_ioremap.h
efi: efivars: limit availability to X86 builds
efi: remove some false dependencies on CONFIG_EFI_VARS
efi: gsmi: fix false dependency on CONFIG_EFI_VARS
efi: efivars: un-export efivars_sysfs_init()
efi: pstore: move workqueue handling out of efivars
efi: pstore: disentangle from deprecated efivars module
efi: mokvar-table: fix some issues in new code
efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
efivarfs: Replace invalid slashes with exclamation marks in dentries.
efi: Delete deprecated parameter comments
efi/libstub: Fix missing-prototypes in string.c
efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
cper,edac,efi: Memory Error Record: bank group/address and chip id
edac,ghes,cper: Add Row Extension to Memory Error Record
efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
efi/libstub: Add efi_warn and *_once logging helpers
integrity: Load certs from the EFI MOK config table
integrity: Move import of MokListRT certs to a separate routine
efi: Support for MOK variable config table
...
encounter an MCE in kernel space but while copying from user memory by
sending them a SIGBUS on return to user space and umapping the faulty
memory, by Tony Luck and Youquan Song.
* memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
* New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
* Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the hw
eval phase and they don't make it into production.
* Misc fixes, improvements and cleanups, as always.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl+EIpUACgkQEsHwGGHe
VUouoBAAgwb+NkWZtIqGImV4f+LOyFjhTR/r/7ZyiijXdbhOIuAdc/jQM31mQxug
sX2jxaRYnf1n6SLA0ggX99gwr2deRQ/hsNf5Abw55GC+Z1dOxpGL0k59A3ELl1IR
H9KYmCAFQIHvzfk38qcdND73XHcgthQoXFBOG9wAPAdgDWnaiWt6lcLAq8OiJTmp
D8pInAYhcnL8YXwMGyQQ1KkFn9HwydoWDsK5Ff2shaw2/+dMQqd1zetenbVtjhLb
iNYGvV7Bi/RQ8PyMbzmtTWa4kwQJAHC2gptkGxty//2ADGVBbqUQdqF9TjIWCNy5
V6Ldv5zo0/1s7DOzji3htzqkSs/K1Ea6d2LtZjejkJipHKV5x068UC6Fu+PlfS2D
VZfcICeapU4G2F3Zvks2DlZ7dVTbHCvoI78Qi7bBgczPUVmk6iqah4xuQaiHyBJc
kTFDA4Nnf/026GpoWRiFry9vqdnHBZyLet5A6Y+SoWF0FbhYnCVPpq4MnussYoav
lUIi9ZZav6X2RZp9DDM1f9d5xubtKq0DKt93wvzqAhjK0T2DikckJ+riOYkI6N8t
fHCBNUkdfgyMzJUTBPAzYQ7RmjbjKWJi7xWP0oz6+GqOJkQfSTVC5/2yEffbb3ya
whYRS6iklbl7yshzaOeecXsZcAeK2oGPfoHg34WkHFgXdF5mNgA=
=u1Wg
-----END PGP SIGNATURE-----
Merge tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Extend the recovery from MCE in kernel space also to processes which
encounter an MCE in kernel space but while copying from user memory
by sending them a SIGBUS on return to user space and umapping the
faulty memory, by Tony Luck and Youquan Song.
- memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
- New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
- Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the
hw eval phase and they don't make it into production.
- Misc fixes, improvements and cleanups, as always.
* tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Allow for copy_mc_fragile symbol checksum to be generated
x86/mce: Decode a kernel instruction to determine if it is copying from user
x86/mce: Recover from poison found while copying from user space
x86/mce: Avoid tail copy when machine check terminated a copy from user
x86/mce: Add _ASM_EXTABLE_CPY for copy user access
x86/mce: Provide method to find out the type of an exception handler
x86/mce: Pass pointer to saved pt_regs to severity calculation routines
x86/copy_mc: Introduce copy_mc_enhanced_fast_string()
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule list
x86/mce: Add Skylake quirk for patrol scrub reported errors
RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()
x86/mce: Annotate mce_rd/wrmsrl() with noinstr
x86/mce/dev-mcelog: Do not update kflags on AMD systems
x86/mce: Stop mce_reign() from re-computing severity for every CPU
x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
x86/mce: Increase maximum number of banks to 64
x86/mce: Delay clearing IA32_MCG_STATUS to the end of do_machine_check()
x86/MCE/AMD, EDAC/mce_amd: Remove struct smca_hwid.xec_bitmap
RAS/CEC: Fix cec_init() prototype
Shenhar.
* New AMD CPUs support, by Yazen Ghannam.
* The usual misc fixes and cleanups all over the subsystem.
-----BEGIN PGP SIGNATURE-----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=ROcp
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add Amazon's Annapurna Labs memory controller EDAC driver (Talel
Shenhar)
- New AMD CPUs support (Yazen Ghannam)
- The usual misc fixes and cleanups all over the subsystem
* tag 'edac_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Set proper family type for Family 19h Models 20h-2Fh
EDAC/mc_sysfs: Add missing newlines when printing {max,dimm}_location
EDAC/aspeed: Use module_platform_driver() to simplify
EDAC, sb_edac: Simplify switch statement
EDAC/ti: Fix handling of platform_get_irq() error
EDAC/aspeed: Fix handling of platform_get_irq() error
EDAC/i5100: Fix error handling order in i5100_init_one()
EDAC/highbank: Handover Calxeda Highbank maintenance to Andre Przywara
EDAC/socfpga: Transfer SoCFPGA EDAC maintainership
EDAC/thunderx: Make symbol lmc_dfs_ents static
EDAC/al-mc-edac: Add Amazon's Annapurna Labs Memory Controller driver
dt-bindings: EDAC: Add Amazon's Annapurna Labs Memory Controller binding
EDAC/mce_amd: Add new error descriptions for existing types
EDAC: Replace HTTP links with HTTPS ones
AMD Family 19h Models 20h-2Fh use the same PCI IDs as Family 17h Models
70h-7Fh. The same family ops and number of channels also apply.
Use the Family17h Model 70h family_type and ops for Family 19h Models
20h-2Fh. Update the controller name to match the system.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201009171803.3214354-1-Yazen.Ghannam@amd.com
Reading those sysfs entries gives:
[root@localhost /]# cat /sys/devices/system/edac/mc/mc0/max_location
memory 3 [root@localhost /]# cat /sys/devices/system/edac/mc/mc0/dimm0/dimm_location
memory 0 [root@localhost /]#
Add newlines after the value it prints for better readability.
[ bp: Make len a signed int and change the check to catch wraparound.
Increment the pointer p only when the length check passes. Use
scnprintf(). ]
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1600051734-8993-1-git-send-email-wangxiongfeng2@huawei.com
Use module_platform_driver() which makes the code simpler by eliminating
boilerplate code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lkml.kernel.org/r/20200914065358.3726216-1-liushixin2@huawei.com
Updates to the UEFI 2.8 Memory Error Record allow splitting the bank field
into bank address and bank group, and using the last 3 bits of the extended
field as a chip identifier.
When needed, print correct version of bank field, bank group, and chip
identification.
Based on UEFI 2.8 Table 299. Memory Error Record.
Signed-off-by: Alex Kluver <alex.kluver@hpe.com>
Reviewed-by: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200819143544.155096-3-alex.kluver@hpe.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Memory errors could be printed with incorrect row values since the DIMM
size has outgrown the 16 bit row field in the CPER structure. UEFI
Specification Version 2.8 has increased the size of row by allowing it to
use the first 2 bits from a previously reserved space within the structure.
When needed, add the extension bits to the row value printed.
Based on UEFI 2.8 Table 299. Memory Error Record
Signed-off-by: Alex Kluver <alex.kluver@hpe.com>
Tested-by: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Kyle Meyer <kyle.meyer@hpe.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200819143544.155096-2-alex.kluver@hpe.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit
b972fdba86 ("EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()")
didn't clear all the information from the scanned system and, more
specifically, left ghes_hw.num_dimms to its previous value. On a
second load (CONFIG_DEBUG_TEST_DRIVER_REMOVE=y), the driver would use
the leftover num_dimms value which is not 0 and thus the 0 check in
enumerate_dimms() will get bypassed and it would go directly to the
pointer deref:
d = &hw->dimms[hw->num_dimms];
which is, of course, NULL:
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #7
Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018
RIP: 0010:enumerate_dimms.cold+0x7b/0x375
Reset the whole ghes_hw on driver unregister so that no stale values are
used on a second system scan.
Fixes: b972fdba86 ("EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()")
Cc: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200911164817.GA19320@zn.tnic
clang static analyzer reports this problem
sb_edac.c:959:2: warning: Undefined or garbage value
returned to caller
return type;
^~~~~~~~~~~
This is a false positive.
However by initializing the type to DEV_UNKNOWN the 3 case can be
removed from the switch, saving a comparison and jump.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20200907153225.7294-1-trix@redhat.com
platform_get_irq() returns a negative error number on error. In such a
case, comparison to 0 would pass the check therefore check the return
value properly, whether it is negative.
[ bp: Massage commit message. ]
Fixes: 86a18ee21e ("EDAC, ti: Add support for TI keystone and DRA7xx EDAC")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200827070743.26628-2-krzk@kernel.org
platform_get_irq() returns a negative error number on error. In such a
case, comparison to 0 would pass the check therefore check the return
value properly, whether it is negative.
[ bp: Massage commit message. ]
Fixes: 9b7e6242ee ("EDAC, aspeed: Add an Aspeed AST2500 EDAC driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Stefan Schaeckeler <schaecsn@gmx.net>
Link: https://lkml.kernel.org/r/20200827070743.26628-1-krzk@kernel.org
When pci_get_device_func() fails, the driver doesn't need to execute
pci_dev_put(). mci should still be freed, though, to prevent a memory
leak. When pci_enable_device() fails, the error injection PCI device
"einj" doesn't need to be disabled either.
[ bp: Massage commit message, rename label to "bail_mc_free". ]
Fixes: 52608ba205 ("i5100_edac: probe for device 19 function 0")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200826121437.31606-1-dinghao.liu@zju.edu.cn
a subsequent load can probe the system properly; by Shiju Jose.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl9LTFoACgkQEsHwGGHe
VUpAxQ//YXxtNRrGxTQa6TGcHE0wRif/EkA20O54zWGPt+kolW9mXmsUFweDi0PH
U6EW1To9H7vukfynCxc+TFGNG8oh3B6XXhaMILsNi691m418Z52a+wOHGaf/qLpX
fqJe3WIIvo97cFtJJJvdHW90NaswtIo0TUspYqUiyThjwI3a9XXmY6Vh7odtVQaP
M/tYt90By60KAR57zROifo6binSOO45zCOJiEO6Qm8X9UphXhShv6oL4TQvlEEwf
ydWSz5NZwPnnVPk4MATMIQoptrixNaDXAfmh2kLBuNNmeNLCHKGous9C7ErI+Pqo
ZH5oECXGOvJELRL3CJ/6fgb9lKaUg9z0IILsRhmoSqj6AYNcDAreWyi4wjJTaRTs
rGNzYGHgB1tlWIpFxHBoxl3u/0EaRatkfvHYnY/i9LlmbIcNQgS+vBxV8LNyCRnk
uxzJDIc8adPx+4RwmzQrnjwN6A52d50JfhVXakQykTWxTaKFg2qkEDUgpEJ4bMCr
i77H1ytr+nGuR4BL9mferTfZqSWZULiQkeDV+skKAx8sSryOrKloucDXJYUzWFDU
6MfKi4iqfNH+w0LQxDE4cRGfOID1tEz7WWI1ROflI17sD2zW+/WkgYoHj7nD2Vwy
xm5DD91Jst4rdDd53PqJhiB3sz/V9VGlDL7o+BsYzYagFP9pyfc=
=WMYq
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v5.9_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A fix to properly clear ghes_edac driver state on driver remove so
that a subsequent load can probe the system properly (Shiju Jose)"
* tag 'edac_urgent_for_v5.9_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()
After
b9cae27728 ("EDAC/ghes: Scan the system once on driver init")
and with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, ghes_hw.dimms becomes
a NULL pointer after the second ->probe() (aka ghes_edac_register())
which the config option causes to be called.
This happens because the static variable which holds down whether
the system has been scanned already, doesn't get reset in
ghes_edac_unregister(). Then, on the second probe, ghes_scan_system()
doesn't get to enumerate the DIMMs, leading to ghes_hw.dimms remaining
NULL.
Clear the variable and rename it to something more descriptive so that a
second probe succeeds.
[ bp: Rewrite commit message. ]
Fixes: b9cae27728 ("EDAC/ghes: Scan the system once on driver init")
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200827140450.1620-1-shiju.jose@huawei.com
The Extended Error Code Bitmap (xec_bitmap) for a Scalable MCA bank type
was intended to be used by the kernel to filter out invalid error codes
on a system. However, this is unnecessary after a few product releases
because the hardware will only report valid error codes. Thus, there's
no need for it with future systems.
Remove the xec_bitmap field and all references to it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200720145353.43924-1-Yazen.Ghannam@amd.com
IA32_MCG_STATUS.RIPV indicates whether the return RIP value pushed onto
the stack as part of machine check delivery is valid or not.
Various drivers copied a code fragment that uses the RIPV bit to
determine the severity of the error as either HW_EVENT_ERR_UNCORRECTED
or HW_EVENT_ERR_FATAL, but this check is reversed (marking errors where
RIPV is set as "FATAL").
Reverse the tests so that the error is marked fatal when RIPV is not set.
Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200707194324.14884-1-tony.luck@intel.com
Symbol 'lmc_dfs_ents' is not used outside of thunderx_edac.c, so
make it static:
drivers/edac/thunderx_edac.c:457:22: warning:
symbol 'lmc_dfs_ents' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Robert Richter <rrichter@marvell.com>
Link: https://lkml.kernel.org/r/20200714142308.46612-1-weiyongjun1@huawei.com
The Amazon's Annapurna Labs Memory Controller EDAC supports ECC capability
for error detection and correction (Single bit error correction, Double
detection). This driver introduces EDAC driver for that capability.
[ bp: Remove "EDAC" string from Kconfig tristate as it is redundant. ]
Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lkml.kernel.org/r/20200816185551.19108-3-talel@amazon.com
A few existing MCA bank types will have new error types in future SMCA
systems.
Add the descriptions for the new error types.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200708153515.1911642-1-Yazen.Ghannam@amd.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
[ bp: Merge all EDAC patches into a single one. ]
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tero Kristo <t-kristo@ti.com> # ti_edac
Link: https://lkml.kernel.org/r/20200708113546.14135-1-grandmaster@al2klimov.de