Routines should be named this way: gb_<object>_<operation>. Fix all
routines that don't match this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Routines should be named this way: gb_<object>_<operation>. Fix all
routines that don't match this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Routines should be named this way: gb_<object>_<operation>. Fix all
routines that don't match this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Routines should be named this way: gb_<object>_<operation>. Fix all
routines that don't match this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In order to facilitate re-use of spi structures, split them out of
independent files and add them into a shared gpbridge.h
This will be a prereq to sharing these headers w/ gbsim.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Spaces were present in place of tab. Fix that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is what I get over mainline:
greybus/raw.c: In function 'gb_raw_send':
greybus/raw.c:153:2: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration]
if (copy_from_user(&request->data[0], data, len)) {
^
greybus/raw.c: In function 'raw_read':
greybus/raw.c:305:2: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration]
if (copy_to_user(buf, &raw_data->data[0], raw_data->len)) {
^
Fix this by including uaccess.h.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This adds a driver that implements the greybus Raw protocol as
specified.
It preserves the message boundries by only allowing a read to receive
a "full" message, and any write() call also is passed in a single
greybus request.
Totally untested, given that we have no raw firmware or gbsim code yet.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
ida_simple_* has a built-in spinlock, no need to grab another lock when
accessing it.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
All we need is a simple ida, so use that interface instead of the more
"complex" idr one. Bonus is we don't need to fix the locking issue I
forgot about when using an idr, as ida has one built-in.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
It should remove the object from sysfs when loopback
connection init error.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add checks for options that shall be enabled in the kernel config
and for options that shall be disable.
To add options to list append them to CONFIG_OPTIONS_ENABLE or
CONFIG_OPTIONS_DISABLE respectively.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
There's no reason we can't support loopback pings or transfers
initiated by the module. Allow it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add some symbols to indicate what kind of "function" the
loopback thread is supposed to be performing--the type of
traffic it generates over its connection.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Use a symbolic constant to define the maximum time (number of
milliseconds) to delay between initiated operations.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Fix a comment that incorrectly says the delay between messages is
limited to 1024 msec; it actually must be <= 1000 msec.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
If an error occurs starting up the loopback thread, the error code
is not extracted properly. Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In gb_loopback_check_attr(), the value of gb->type is checked for
validity. The only valid values are 0, 1, and 2. But the check
allows the value 3. Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
sparse is rightfully complaining about a lack of converting when
accessing or assigning to little endian fields. Fix them all up to work
properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
This makes some functions and structures static, as warned by sparse, as
they don't need to be global.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
remane protocol define from GREYBUS_PROTOCOL_LED to GREYBUS_PROTOCOL_LIGHTS to
be coherent with the specification.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We already have code to parse Endo ID, lets use it to create modules at
run time instead of creating them from a static array.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Endo is described by a 16 bit value. Which represents the properties of
modules, interface and ribs on front and back of endo.
This 16 bit value can be used to find all possible pairs of modules and
interfaces and creating modules based on that.
This patch provides helpers to parse 16 bit Endo ID.
(Based on original code written by Alex Elder.)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In commit 1efb53a220 ("ASoC: simple-card: Remove support for setting
differing DAI formats"), the .fmt field was removed from struct
asoc_simple_dai. Fix this build breakage by not trying to set it.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Acked-by: John Stultz <john.stultz@linaro.org>
sizeof wants %zu when on a 64bit build, so change the dev_err() call to
remove a build warning in the audio.c file.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Introduce INSTALL_MOD_PATH to allow for building and installing of the
greybus modules from a different location.
This lets you build the greybus modules on a PC and then install the
modules to an SD card in the appropriate location relative to the SD such
as /media/sdcard/lib/modules/version and subsequent running of depmod in
the same location. If INSTALL_MOD_PATH isn't specified the default
behaviour of installing and depmoding to /lib/modules/version is
maintained.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
So here's the current greybus audio driver, which I
wanted to send out for more serious review and
consideration for merging.
I've tried to integrate much of the feedback from the
last round and most of the hotplug issues that I've found
have been resolved. I've tested this via gbsim, and the
Android ARA HAL layer seems to work with it.
Mark has also successfully played audio with this driver,
adding a few hacks to get the codec's i2c connection to
probe.
Current issues:
* Hotplug problem - When gbsim is killed, or the module
removed, the greybus driver gets stuck since the android
mediaserver process is holding the audio device open.
Killing the mediaserver allows things to clean up and
allows greybus to accept new gbsim connections. I have
a workaround patch to the soc-core.c logic which converts
the snd_card_free() call to snd_card_free_when_closed()
which allows the greybus connection cleanup to finish.
Remaining todos:
* Probably need to break apart the mgmt_setup function
to integrate better with the constraint logic. I took
a really basic stab at this, but more is probably
needed.
* Figure out how to properly find and tie in the
codec's I2C bus-id to the driver.
This code requires that the kernel support the following
config options, which I've enabled in a separate kernel
patch:
CONFIG_SND_SIMPLE_CARD
CONFIG_SND_SOC_SPDIF
CONFIG_SND_SOC_RT5645
I really can't calim to be the sole author of this, since
many many fixes and tweaks that have been folded in have
come from Mark Greer. His analsysis and debugging is really
what has made this dummy-framework driver evolve into an
actual audio driver. So much credit and thanks to Mark!
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
All protocols use the same value to distinguish between request and
response message types. This is a requirement.
Use GB_MESSAGE_TYPE_RESPONSE rather than GB_OPERATION_TYPE_RESPONSE
for the name of the flag used to distiguish between request and
response messages.
Get rid of the redundant response flag definitions that are
associated with specific protocols.
Describe the symbolic values as "operation types" rather than
"message types" where they are defined. The message type for a
request is the same as the operation type; the message type for a
response is the operation type OR'd with GB_MESSAGE_TYPE_RESPONSE.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Conditionally define a new symbol DRIVER_OWNS_PSY_STRUCT, which is
set in "kernel_ver.h" based on on the kernel version. Use it to
distinguish code used for kernels that differ in whether a power
supply structure is owned by the driver, or by the power supply
core.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
When a battery connection is initialized, a gb_battery structure for
it is allocated in gb_battery_connection_init(). Currently that
function ends by calling init_and_register(); in the event an error
occurs, init_and_register() is responsible for freeing the allocated
gb_battery structure.
Make the code a bit better balanced by having the function that
allocates the structure be responsible for freeing it in case of
error.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Both ES1 and ES2 drivers cannot be loaded due to a driver name conflict.
Give ES2 driver the correct name.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to go past 80 characters for the define_get_version macro, so
fix up the indentation to not do so.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Remove the trailing ';' character from the gb_protocol_driver() macro as
it's not needed and is bad coding style.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
checkpatch reminds us that a blank line should go after a variable
definition, so fix it up here.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
You should always put a space after a ',', so do it for the
KERNEL_VERSION() macro as well. This makes checkpatch.pl happy also.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
When cutting and pasting some of the ATTR macros into kernel_ver.h, I
dropped the tabs. Fix this up and make checkpatch.pl happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
The 4.1-rc1 kernel changed the power supply apis such that the
structures are now owned by the power supply core, and not the
individual drivers. This broke the greybus battery driver, so update it
to support both the old and the new apis.
The API changes were such that I can't "hide" them in kernel_ver.h, but
rather the driver itself needs to have ugly #ifdefs in it. I tried to
keep it to a minimum, making a sub-function for initializing the power
supply device that is implemented differently for different kernel
versions.
When this is submitted upstream, or if we ever move our AP development
to 4.1 or greater, the support for older kernels can be removed.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Note that this also makes sure the id-field is naturally aligned in case
we ever were to remove the __packed attribute.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Explicitly add pad-bytes to manifest descriptors to match their layout
in greybus specification.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We carry this information as part of bundle descriptor now and this can
be removed.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
It is not required anymore. Drop it.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
These should come from control protocol instead.
For now, initialize this statically with a FIXME to not forget it later.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The kernfs code guarantees we'll get a NUL-terminated buffer.
Use kstrdup() rather than kzalloc() + memcpy() in state_store()
making it slightly clearer what we're doing. This has the added
benefit of guaranteeing that the stored string has no NUL character
inside it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A descriptor passed to AP can be bigger than what AP expects, if
manifest's minor version is higher with same major number as the AP. As
it can have some extra data in descriptor.
But, if AP and manifest versions are identical, or if the AP's minor
version is greater than the manifest version, we should at least warn
(if not fail).
Doing this would require some changes to record the manifest version
somewhere reachable by identify_descriptor().
For now, just warn if descriptor is bigger than expected.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
String descriptors are padded towards the end to align them to 4 byte
boundaries. Take that into account while calculating expected size.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
These structures are already marked as __packed, as these are enclosed
within:
#pragma pack(push, 1)
#pragma pack(pop)
Lets mark them __packed explicitly.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
There can be three Endo types: mini, medium and large. And that's what
Endo 'type' should refer to.
But we have named the 16 bit number that uniquely represents a valid
endo, as its type. 'id' seems to be a more suitable name to that instead
of 'type'. Lets rename it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
0x0555 isn't a valid endo id, use a real one.
0x4755 should be the Endo id for the (medium) Spiral 2 prototype. Lets
use that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
These are all GPLv2-only kernel modules, so properly set the correct
MODULE_LICENSE string to make static checkers happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
