Commit graph

24299 commits

Author SHA1 Message Date
Namhyung Kim
c1b907953b perf tools: Skip PERF_RECORD_MMAP event synthesis for kernel threads
To synthesize information to resolve sample IPs, it needs to scan task
and mmap info from the /proc filesystem.  For each process, it opens
(and reads) status and maps file respectively.  But as kernel threads
don't have memory maps so we can skip the maps file.

To find kernel threads, check "VmPeak:" line in /proc/<PID>/status file.
It's about the peak virtual memory usage so only user-level tasks have
that.  Note that it's possible to miss the line due to partial reads.
So we should double-check if it's a really kernel thread when there's no
VmPeak line.

Thus check "Threads:" line (which follows the VmPeak line whether or not
it exists) to be sure it's read enough data - just in case of deeply
nested pid namespaces or large number of supplementary groups are
involved.

This is for user process:

  $ head -40 /proc/1/status
  Name:	systemd
  Umask:	0000
  State:	S (sleeping)
  Tgid:	1
  Ngid:	0
  Pid:	1
  PPid:	0
  TracerPid:	0
  Uid:	0	0	0	0
  Gid:	0	0	0	0
  FDSize:	256
  Groups:
  NStgid:	1
  NSpid:	1
  NSpgid:	1
  NSsid:	1
  VmPeak:	  234192 kB           <-- here
  VmSize:	  169964 kB
  VmLck:	       0 kB
  VmPin:	       0 kB
  VmHWM:	   29528 kB
  VmRSS:	    6104 kB
  RssAnon:	    2756 kB
  RssFile:	    3348 kB
  RssShmem:	       0 kB
  VmData:	   19776 kB
  VmStk:	    1036 kB
  VmExe:	     784 kB
  VmLib:	    9532 kB
  VmPTE:	     116 kB
  VmSwap:	    2400 kB
  HugetlbPages:	       0 kB
  CoreDumping:	0
  THP_enabled:	1
  Threads:	1                     <-- and here
  SigQ:	1/62808
  SigPnd:	0000000000000000
  ShdPnd:	0000000000000000
  SigBlk:	7be3c0fe28014a03
  SigIgn:	0000000000001000

And this is for kernel thread:

  $ head -20 /proc/2/status
  Name:	kthreadd
  Umask:	0000
  State:	S (sleeping)
  Tgid:	2
  Ngid:	0
  Pid:	2
  PPid:	0
  TracerPid:	0
  Uid:	0	0	0	0
  Gid:	0	0	0	0
  FDSize:	64
  Groups:
  NStgid:	2
  NSpid:	2
  NSpgid:	0
  NSsid:	0
  Threads:	1                     <-- here
  SigQ:	1/62808
  SigPnd:	0000000000000000
  ShdPnd:	0000000000000000

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210202090118.2008551-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:44 -03:00
Namhyung Kim
30626e0844 perf tools: Use /proc/<PID>/task/<TID>/status for PERF_RECORD_ event synthesis
To save memory usage, it needs to reduce the number of entries in the
proc filesystem.  It's using /proc/<PID>/task directory to traverse
threads in the process and then kernel creates /proc/<PID>/task/<TID>
entries.

After that it checks the thread info using the /proc/<TID>/status file
rather than /proc/<PID>/task/<TID>/status.  As far as I can see, they
are the same and contain all the info we need.

Using the latter eliminates the unnecessary /proc/<TID> entry.  This can
be useful especially a large number of threads are used in the system.
In my experiment around 1KB of memory on average was saved for each
thread (which is not a thread group leader).

To do this, pass both pid and tid to perf_event_prepare_comm() if it
knows them.  In case it doesn't know, passing 0 as pid will do the old
way.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210202090118.2008551-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:44 -03:00
John Garry
c3a9cdef61 perf vendor events arm64: Reference common and uarch events for A76
Reduce duplication in the JSONs by referencing standard events from
armv8-common-and-microarch.json

In general the "PublicDescription" fields are not modified when somewhat
significantly worded differently than the standard.

Apart from that, description and names for events slightly different to
standard are changed (to standard) for consistency.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-5-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:44 -03:00
John Garry
d02d5dc882 perf vendor events arm64: Reference common and uarch events for Ampere eMag
Reduce duplication in the JSONs by referencing standard events from
armv8-common-and-microarch.json

In general the "PublicDescription" fields are not modified when somewhat
significantly worded differently than the standard.

Apart from that, description and names for events slightly different to
standard are changed (to standard) for consistency.

Note that names for events 0x34 and 0x35 are non-standard and remain
unchanged. Those events came from the following originally:

  4c2479c67b/Documentation/arm64/eMAG-ARM-CoreImpDefined.pdf

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: mathieu.poirier@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:44 -03:00
John Garry
c77669662f perf vendor events arm64: Add common and uarch event JSON
Add a common and microarch JSON, which can be referenced from CPU JSONs.

For now, brief and public description are as event brief event
description from the ARMv8 ARM [0], D7-11.

The list of events is not complete, as not all events will be referenced
yet.

Reference document is at the following:

[0] https://documentation-service.arm.com/static/5fa3bd1eb209f547eebd4141?token=

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:43 -03:00
John Garry
2bf797be81 perf vendor events arm64: Fix Ampere eMag event typo
The "briefdescription" for event 0x35 has a typo - fix it.

Fixes: d35c595bf0 ("perf vendor events arm64: Revise core JSON events for eMAG")
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:43 -03:00
Jin Yao
4b799a9b77 perf script: Support DSO filter like in other perf tools
Other perf tool builtins already supported a DSO filter.

For example:

  $ perf report --dsos a,b,c

which only considers symbols in these dsos.

Now the DSO filter is supported in 'perf script':

  root@kbl-ppc:~# ./perf script --dsos "[kernel.kallsyms]"
            perf 18123 [000] 6142863.075104:          1   cycles:  ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
            perf 18123 [000] 6142863.075107:          1   cycles:  ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
            perf 18123 [000] 6142863.075108:         10   cycles:  ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
            perf 18123 [000] 6142863.075109:        273   cycles:  ffffffff9ca7730a native_write_msr+0xa ([kernel.kallsyms])
            perf 18123 [000] 6142863.075110:       7684   cycles:  ffffffff9ca3c9c0 native_sched_clock+0x50 ([kernel.kallsyms])
            perf 18123 [000] 6142863.075112:     213017   cycles:  ffffffff9d765a92 syscall_exit_to_user_mode+0x32 ([kernel.kallsyms])
            perf 18123 [001] 6142863.075156:          1   cycles:  ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
            perf 18123 [001] 6142863.075158:          1   cycles:  ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
            perf 18123 [001] 6142863.075159:         17   cycles:  ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])

Committer testing:

  $ perf script
                ls 2364888 29303.010949:          1 cycles:u:  ffffffffa4bbc6a9 [unknown] ([unknown])
                ls 2364888 29303.010957:          1 cycles:u:  ffffffffa429ef48 [unknown] ([unknown])
                ls 2364888 29303.010961:          1 cycles:u:  ffffffffa4260133 [unknown] ([unknown])
                ls 2364888 29303.010964:          5 cycles:u:  ffffffffa429efad [unknown] ([unknown])
                ls 2364888 29303.010967:         41 cycles:u:  ffffffffa42a4586 [unknown] ([unknown])
                ls 2364888 29303.010972:        435 cycles:u:  ffffffffa429efe0 [unknown] ([unknown])
                ls 2364888 29303.010978:       5142 cycles:u:      7f9b95bc2abf __GI___tunables_init+0x11f (/usr/lib64/ld-2.32.so)
                ls 2364888 29303.011006:      38551 cycles:u:  ffffffffa4290f61 [unknown] ([unknown])
                ls 2364888 29303.011486:     238234 cycles:u:      7f9b95bb7741 _dl_relocate_object+0xa71 (/usr/lib64/ld-2.32.so)
                ls 2364888 29303.011937:     415870 cycles:u:      7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so)
  $

Before:

  $ perf script --dsos /usr/lib64/libc-2.32.so |& head -5
    Error: unknown option `dsos'

   Usage: perf script [<options>]
      or: perf script [<options>] record <script> [<record-options>] <command>
      or: perf script [<options>] report <script> [script-args]
  $

After:

  $ perf script --dsos /usr/lib64/libc-2.32.so
                ls 2364888 29303.011937:     415870 cycles:u:      7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so)
  $

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210124232750.19170-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:43 -03:00
Arnaldo Carvalho de Melo
c69bf11ad3 perf tools: Fix DSO filtering when not finding a map for a sampled address
When we lookup an address and don't find a map we should filter that
sample if the user specified a list of --dso entries to filter on, fix
it.

Before:

  $ perf script
             sleep 274800  2843.556162:          1 cycles:u:  ffffffffbb26bff4 [unknown] ([unknown])
             sleep 274800  2843.556168:          1 cycles:u:  ffffffffbb2b047d [unknown] ([unknown])
             sleep 274800  2843.556171:          1 cycles:u:  ffffffffbb2706b2 [unknown] ([unknown])
             sleep 274800  2843.556174:          6 cycles:u:  ffffffffbb2b0267 [unknown] ([unknown])
             sleep 274800  2843.556176:         59 cycles:u:  ffffffffbb2b03b1 [unknown] ([unknown])
             sleep 274800  2843.556180:        691 cycles:u:  ffffffffbb26bff4 [unknown] ([unknown])
             sleep 274800  2843.556189:       9160 cycles:u:      7fa9550eeaa3 __GI___tunables_init+0xf3 (/usr/lib64/ld-2.32.so)
             sleep 274800  2843.556312:      86937 cycles:u:      7fa9550e157b _dl_lookup_symbol_x+0x4b (/usr/lib64/ld-2.32.so)
  $

So we have some samples we somehow didn't find in a map for, if we now
do:

  $ perf report --stdio --dso /usr/lib64/ld-2.32.so
  # dso: /usr/lib64/ld-2.32.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 8  of event 'cycles:u'
  # Event count (approx.): 96856
  #
  # Overhead  Command  Symbol
  # ........  .......  ........................
  #
      89.76%  sleep    [.] _dl_lookup_symbol_x
       9.46%  sleep    [.] __GI___tunables_init
       0.71%  sleep    [k] 0xffffffffbb26bff4
       0.06%  sleep    [k] 0xffffffffbb2b03b1
       0.01%  sleep    [k] 0xffffffffbb2b0267
       0.00%  sleep    [k] 0xffffffffbb2706b2
       0.00%  sleep    [k] 0xffffffffbb2b047d
  $

After this patch we get the right output with just entries for the DSOs
specified in --dso:

  $ perf report --stdio --dso /usr/lib64/ld-2.32.so
  # dso: /usr/lib64/ld-2.32.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 8  of event 'cycles:u'
  # Event count (approx.): 96856
  #
  # Overhead  Command  Symbol
  # ........  .......  ........................
  #
      89.76%  sleep    [.] _dl_lookup_symbol_x
       9.46%  sleep    [.] __GI___tunables_init
  $
  #

Fixes: 96415e4d3f ("perf symbols: Avoid unnecessary symbol loading when dso list is specified")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210128131209.GD775562@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:43 -03:00
Kan Liang
42641d6f4d perf stat: Add Topdown metrics events as default events
The Topdown Microarchitecture Analysis (TMA) Method is a structured
analysis methodology to identify critical performance bottlenecks in
out-of-order processors. From the Ice Lake and later platforms, the
Topdown information can be retrieved from the dedicated "metrics"
register, which isn't impacted by other events. Also, the Topdown
metrics support both per thread/process and per core measuring.  Adding
Topdown metrics events as default events can enrich the default
measuring information, and would not cost any extra multiplexing.

Introduce arch_evlist__add_default_attrs() to allow architecture
specific default events. Add the Topdown metrics events in the X86
specific arch_evlist__add_default_attrs(). Other architectures can add
their own default events later separately.

With the patch:

 $ perf stat sleep 1

 Performance counter stats for 'sleep 1':

           0.82 msec task-clock:u              #    0.001 CPUs utilized
              0      context-switches:u        #    0.000 K/sec
              0      cpu-migrations:u          #    0.000 K/sec
             61      page-faults:u             #    0.074 M/sec
        319,941      cycles:u                  #    0.388 GHz
        242,802      instructions:u            #    0.76  insn per cycle
         54,380      branches:u                #   66.028 M/sec
          4,043      branch-misses:u           #    7.43% of all branches
      1,585,555      slots:u                   # 1925.189 M/sec
        238,941      topdown-retiring:u        #     15.0% retiring
        410,378      topdown-bad-spec:u        #     25.8% bad speculation
        634,222      topdown-fe-bound:u        #     39.9% frontend bound
        304,675      topdown-be-bound:u        #     19.2% backend bound

       1.001791625 seconds time elapsed

       0.000000000 seconds user
       0.001572000 seconds sys

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210121133752.118327-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:43 -03:00
John Garry
7efce5c240 perf test: Add parse-metric memory bandwidth testcase
Event duration_time in a metric expression requires special handling.

Improve test coverage by including a metric whose expression includes
duration_time. The actual metric is a copied from the L1D_Cache_Fill_BW
metric on my broadwell machine.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: http://lore.kernel.org/lkml/1611578842-5749-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-03 13:10:27 -03:00
Arnaldo Carvalho de Melo
70f0ba9f24 Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-27 16:48:04 -03:00
Linus Torvalds
32d43270ca - Adjust objtool to handle a recent binutils change to not generate unused
symbols anymore.
 
  - Revert the fail-the-build-on-fatal-errors objtool strategy for now due to the
  ever-increasing matrix of supported toolchains/plugins and them causing too
  many such fatal errors currently.
 
  - Do not add empty symbols to objdump's rbtree to accommodate clang removing
  section symbols.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmANZFcACgkQEsHwGGHe
 VUp0jg//UtL0PMCun6DLVf8jTLwtzlCb25/FFLyF6RpPQvt+Zpda89ZqG9R81pXm
 lMMc3L+2YBddVG2pnUC6jyWwZIpx+M5D0ZKa7AKY6K5o7tS/9BtCPrWwmuf+6TDi
 6meLWy0hDOxSS5YifwH7LR8aj57SfsHqNfO4LF2ml857MX31Wwr/x5yryWPqho1g
 8v4sK+cAesu8m7leVAVwbdSEiqEP9NMQxR3Te/4+aT3Xyqc/+EPttFJ30564/gaF
 Zes1CqmUB7G9l8c9igvvCNqZyYyy8OoPp/UjW6NTu7soYhutsWkz/28deiW9WGks
 sKiJ5E/lEIimuORj0M++85CZcS4SaH4MRbfXi2F4BisGFS8c7CSwH3457WAnCuOf
 FZ/kaVYN2CP9DWbBQI032hdUkWScEzF2racNQ6uXghlhLFQE3l/sBPS2WsHzKhnF
 Jtwt1fGEHAaC3LeI2AenmSLX8q/5chZMTByp5z7Lq97SSsrk65N5uFSuSaU6cK5G
 0WDA5r6v0dy6szqzLe7mzaKdx2MOK6ygLisGBJDtYr7FZ5szHXz6e2vgJUEB82WB
 H21/mGf0Rl4GhHIH76W14imEWlQscp2wIEXJ8RWgoytRkWgHxBe59dMrwTB0s4jB
 R/KPlwA1eUzEaTBbARGMRGNv+Te/Z3QMYAXLlq1BZW3EKuw4L84=
 =FWZ1
 -----END PGP SIGNATURE-----

Merge tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool fixes from Borislav Petkov:

 - Adjust objtool to handle a recent binutils change to not generate
   unused symbols anymore.

 - Revert the fail-the-build-on-fatal-errors objtool strategy for now
   due to the ever-increasing matrix of supported toolchains/plugins and
   them causing too many such fatal errors currently.

 - Do not add empty symbols to objdump's rbtree to accommodate clang
   removing section symbols.

* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Don't fail on missing symbol table
  objtool: Don't fail the kernel build on fatal errors
  objtool: Don't add empty symbols to the rbtree
2021-01-24 10:17:03 -08:00
Linus Torvalds
14c50a6618 powerpc fixes for 5.11 #5
Fix a bad interaction between the scv handling and the fallback L1D flush, which
 could lead to user register corruption. Only affects people using scv (~no one)
 on machines with old firmware that are missing the L1D flush.
 
 Two small selftest fixes.
 
 Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das, Tulio
 Magno Quites Machado Filho.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmAMrdETHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgF+xD/97Hl6qlS5GllC1mVHUW/eyekfqt7io
 XHSPeeayZddj3FhfX+eyfICUtmeQP9MXhp9Jyz/JyD+RCpIIiEbJ40CnCpsLeOFj
 RmRxiVX1lB8tEp5gMZnVdv8z3XDTkzt9YDPlHA7Ta/rqkD0ursF8yVnDG61ZjWnF
 +2uAozJp9p+nOVrd6wqd5wzdJyWyVXHCkCfyN/HD1rPAR0b6oFm8R3Pca7UR6Qk3
 Nt5deAaTisl3jDT+1C+PNq/YErHeERwNyLcRP7dT7VvO9Cch2ijxqc3e0loLT1Nz
 bTL6bI1JhqePXZQRWRTxpk0A6yss0hWlMudSoRbQzhDbcEY+4QxK90oXevalHXcC
 C3e3qgO6JoN1hN4tw9kFQr1r+x+xsKpR+jO9MfE7ndFGfAPc2An5rSRbFEB6cUvr
 qqVh3iNHNGILeE74EyAthjGF2nZEmxI1DAFZFjoDoeWMi+VyE2MAzcIMJg22mhYx
 5n64CCrqqTjhXtJgXm31L8WUKHz2JZnwwH3nTnrPXswzTMhkYp2fTQSySWCE4Zyo
 xygoMfnxIuNkL3hZN0cxNzjr0uGrWIdQq/JFui1Wek68qNK0NEH5r5FmDTTFgk0D
 A3sJAEmKehs3Ka64LA5ejYza0zU1wnrOcyJKDpxQAWKldcKiQQw7Gup9dQe218Vc
 ZemyuT9YDlOilQ==
 =4nYe
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix a bad interaction between the scv handling and the fallback L1D
   flush, which could lead to user register corruption. Only affects
   people using scv (~no one) on machines with old firmware that are
   missing the L1D flush.

 - Two small selftest fixes.

Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.

* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: fix scv entry fallback flush vs interrupt
  selftests/powerpc: Only test lwm/stmw on big endian
  selftests/powerpc: Fix exit status of pkey tests
2021-01-24 09:40:51 -08:00
Linus Torvalds
929b979611 linux-kselftest-kunit-fixes-5.11-rc5
This KUnit update for Linux 5.11-rc5 consist of 5 fixes to kunit tool
 and documentation from Daniel Latypov and David Gow.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmALbwMACgkQCwJExA0N
 QxxkRhAA4x1n5r1IhkH8jSZ15E0zDrE6eQpAJIyM5R5+ZCLfZXtgMEVK4OzYdzC1
 5z0ZdAYp/xcalbhYnKozv8TH9fe/Zkzj76DJRt45Ajo90RMG5Tnx6z3UWtsBlW+3
 mVzJPTM2nGNHuVnoVOQHnnZQMrPiCkTNm1ccjCG6u98MdPGpzRfoZydG4uCJ1UbB
 /3+j2UKoScW2oRDXUNszfiCQDACkzrXydPgr9L/+vqHgj8tGXMXaA/jZnOu++xFx
 Oy1vvWOXcTtfLfNWTZfEEKwjxIqGZq3V576JptiuAfWjadyg3XYAXk86vGpiX+g7
 cyDcOY+7AA7eL3KK+1E8bLRCL0q1GxiTHMBc3q+WK5DAUbz63Y6MT8PG2D1V1k9p
 dSEz0jL1lx5Hu6k3ABw5xLE4MzNeozI5kETsFk35GHCi7dzLi7FJEPM9vcj15kQ9
 tmN5GOHJ5bNRfy0pYcR/b67tnr6SmRRx0ion2RQNB84C2Vbx/g53FTzPKUaryKVv
 Jm0aWHqL2/ooBE2uruYCbre6502ol4lCypWd+dAq54/vJANVkgqxdM0NuLe8RjtY
 DjzMmIfRNyOvCLXcAcDHwbMVci0N5HR6YbEgdeF+ySk5hXjlL1+iR1pqevS5iUuA
 0zp0tITyTjZTDUQos1I6RF5eUqhiS7WtHBQkTfK1FyHg9kVxkns=
 =4uNi
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah :
 "Five fixes to the kunit tool and documentation from Daniel Latypov and
  David Gow"

* tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: move kunitconfig parsing into __init__, make it optional
  kunit: tool: fix minor typing issue with None status
  kunit: tool: surface and address more typing issues
  Documentation: kunit: include example of a parameterized test
  kunit: tool: Fix spelling of "diagnostic" in kunit_parser
2021-01-23 11:25:33 -08:00
Linus Torvalds
faba877b3b perf tools fixes for 5.11, 2nd batch:
- Fix id index used in Intel PT for heterogeneous systems.
 
 - Fix overrun issue in 'perf script' for dynamically-allocated PMU type number.
 
 - Fix 'perf stat' metrics containing the 'duration_time' synthetic event.
 
 - Fix system PMU 'perf stat' metrics.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 
 Test results:
 
 The first ones are container based builds of tools/perf with and without libelf
 support.  Where clang is available, it is also used to build perf with/without
 libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
 when clang and its devel libraries are installed.
 
 The objtool and samples/bpf/ builds are disabled now that I'm switching from
 using the sources in a local volume to fetching them from a http server to
 build it inside the container, to make it easier to build in a container cluster.
 Those will come back later.
 
 Several are cross builds, the ones with -x-ARCH and the android one, and those
 may not have all the features built, due to lack of multi-arch devel packages,
 available and being used so far on just a few, like
 debian:experimental-x-{arm64,mipsel}.
 
 The 'perf test' one will perform a variety of tests exercising
 tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
 with a variety of command line event specifications to then intercept the
 sys_perf_event syscall to check that the perf_event_attr fields are set up as
 expected, among a variety of other unit tests.
 
 Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
 with a variety of feature sets, exercising the build with an incomplete set of
 features as well as with a complete one. It is planned to have it run on each
 of the containers mentioned above, using some container orchestration
 infrastructure. Get in contact if interested in helping having this in place.
 
   $ grep "model name" -m1 /proc/cpuinfo
   model name: AMD Ryzen 9 3900X 12-Core Processor
   # export PERF_TARBALL=http://192.168.86.5/perf/perf-5.11.0-rc4.tar.xz
   # dm
    1    74.71 alpine:3.4                    : Ok   gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
    2    77.09 alpine:3.5                    : Ok   gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
    3    80.09 alpine:3.6                    : Ok   gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
    4    89.14 alpine:3.7                    : Ok   gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
    5    87.13 alpine:3.8                    : Ok   gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
    6    92.37 alpine:3.9                    : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
    7   118.64 alpine:3.10                   : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
    8   133.57 alpine:3.11                   : Ok   gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
    9   125.85 alpine:3.12                   : Ok   gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
   10   136.32 alpine:edge                   : Ok   gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
   11    75.47 alt:p8                        : Ok   x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
   12    93.43 alt:p9                        : Ok   x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
   13    92.28 alt:sisyphus                  : Ok   x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
   14    71.12 amazonlinux:1                 : Ok   gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
   15   109.14 amazonlinux:2                 : Ok   gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-12), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
   16    22.81 android-ndk:r12b-arm          : Ok   arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
   17    22.42 android-ndk:r15c-arm          : Ok   arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
   18    27.81 centos:6                      : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
   19    34.37 centos:7                      : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)
   20   107.74 centos:8                      : Ok   gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 10.0.1 (Red Hat 10.0.1-1.module_el8.3.0+467+cb298d5b)
   21    71.83 clearlinux:latest             : Ok   gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201217 releases/gcc-10.2.0-643-g7cbb07d2fc, clang version 10.0.1
   22    83.97 debian:8                      : Ok   gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
   23    83.49 debian:9                      : Ok   gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
   24    83.13 debian:10                     : Ok   gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
   25    82.58 debian:experimental           : Ok   gcc (Debian 10.2.1-6) 10.2.1 20210110, Debian clang version 11.0.1-2
   26    35.87 debian:experimental-x-arm64   : Ok   aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110
   27    33.06 debian:experimental-x-mips64  : Ok   mips64-linux-gnuabi64-gcc (Debian 10.2.1-3) 10.2.1 20201224
   28    14.47 debian:experimental-x-mipsel  : FAIL mipsel-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
 
     util/map.c: In function 'map__new':
     util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
       109 |    "%s/platforms/%s/arch-%s/usr/lib/%s",
           |     ^~
     In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
                      from util/symbol.h:11,
                      from util/map.c:2:
     /usr/mipsel-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
        67 |   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
           |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        68 |        __bos (__s), __fmt, __va_arg_pack ());
           |        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     cc1: all warnings being treated as errors
 
   29    32.67 fedora:20                     : Ok   gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
   30    32.61 fedora:22                     : Ok   gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
   31    75.23 fedora:23                     : Ok   gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
   32    89.27 fedora:24                     : Ok   gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
   33    26.67 fedora:24-x-ARC-uClibc        : Ok   arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
   34    91.17 fedora:25                     : Ok   gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
   35   104.12 fedora:26                     : Ok   gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
   36   105.50 fedora:27                     : Ok   gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
   37   118.28 fedora:28                     : Ok   gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
   38   125.28 fedora:29                     : Ok   gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
   39   127.35 fedora:30                     : Ok   gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
   40    27.40 fedora:30-x-ARC-uClibc        : Ok   arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
   41   127.91 fedora:31                     : Ok   gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-4.fc31)
   42   108.77 fedora:32                     : Ok   gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 10.0.1 (Fedora 10.0.1-3.fc32)
   43   106.15 fedora:33                     : Ok   gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9), clang version 11.0.0 (Fedora 11.0.0-2.fc33)
   44   107.75 fedora:34                     : Ok   gcc (GCC) 11.0.0 20210116 (Red Hat 11.0.0-0), clang version 11.0.1 (Fedora 11.0.1-4.fc34)
   45   107.07 fedora:rawhide                : Ok   gcc (GCC) 11.0.0 20210116 (Red Hat 11.0.0-0), clang version 11.0.1 (Fedora 11.0.1-4.fc34)
   46    38.19 gentoo-stage3-amd64:latest    : Ok   gcc (Gentoo 9.3.0-r1 p3) 9.3.0
   47    73.67 mageia:5                      : Ok   gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
   48    92.39 mageia:6                      : Ok   gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
   49   112.04 manjaro:latest                : Ok   gcc (GCC) 10.2.0, clang version 10.0.1
   50   429.06 openmandriva:cooker           : Ok   gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-llvmorg-11.0.0/clang 63e22714ac938c6b537bd958f70680d3331a2030)
   51   133.40 opensuse:15.0                 : Ok   gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
   52   139.71 opensuse:15.1                 : Ok   gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
   53   131.91 opensuse:15.2                 : Ok   gcc (SUSE Linux) 7.5.0, clang version 9.0.1
   54   124.18 opensuse:42.3                 : Ok   gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
   55   123.24 opensuse:tumbleweed           : Ok   gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
   56    29.15 oraclelinux:6                 : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
   57    34.21 oraclelinux:7                 : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
   58   106.00 oraclelinux:8                 : Ok   gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.1), clang version 10.0.1 (Red Hat 10.0.1-1.0.1.module+el8.3.0+7827+89335dbf)
   59    30.31 ubuntu:12.04                  : Ok   gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
   60    33.75 ubuntu:14.04                  : Ok   gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
   61    85.21 ubuntu:16.04                  : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
   62    28.46 ubuntu:16.04-x-arm            : Ok   arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   63    27.47 ubuntu:16.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   64    27.25 ubuntu:16.04-x-powerpc        : Ok   powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   65    28.01 ubuntu:16.04-x-powerpc64      : Ok   powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   66    28.28 ubuntu:16.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   67    28.30 ubuntu:16.04-x-s390           : Ok   s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   68   100.23 ubuntu:18.04                  : Ok   gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
   69    29.71 ubuntu:18.04-x-arm            : Ok   arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
   70    29.52 ubuntu:18.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
   71    24.54 ubuntu:18.04-x-m68k           : Ok   m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   72    29.55 ubuntu:18.04-x-powerpc        : Ok   powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   73    32.13 ubuntu:18.04-x-powerpc64      : Ok   powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   74    31.38 ubuntu:18.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   75   164.61 ubuntu:18.04-x-riscv64        : Ok   riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   76    26.98 ubuntu:18.04-x-s390           : Ok   s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   77    28.39 ubuntu:18.04-x-sh4            : Ok   sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   78    26.73 ubuntu:18.04-x-sparc64        : Ok   sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   79    79.63 ubuntu:19.10                  : Ok   gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
   80    29.04 ubuntu:19.10-x-alpha          : Ok   alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
   81    26.90 ubuntu:19.10-x-hppa           : Ok   hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
   82    84.70 ubuntu:20.04                  : Ok   gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1
   83    34.34 ubuntu:20.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0
   84    82.71 ubuntu:20.10                  : Ok   gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2
   $
 
   # uname -a
   Linux quaco 5.10.7-100.fc32.x86_64 #1 SMP Tue Jan 12 20:25:28 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
   # git log --oneline -1
   8adc0a06d6 perf script: Fix overrun issue for dynamically-allocated PMU type number
   # perf version --build-options
   perf version 5.11.rc4.g8adc0a06d68a
                    dwarf: [ on  ]  # HAVE_DWARF_SUPPORT
       dwarf_getlocations: [ on  ]  # HAVE_DWARF_GETLOCATIONS_SUPPORT
                    glibc: [ on  ]  # HAVE_GLIBC_SUPPORT
            syscall_table: [ on  ]  # HAVE_SYSCALL_TABLE_SUPPORT
                   libbfd: [ on  ]  # HAVE_LIBBFD_SUPPORT
                   libelf: [ on  ]  # HAVE_LIBELF_SUPPORT
                  libnuma: [ on  ]  # HAVE_LIBNUMA_SUPPORT
   numa_num_possible_cpus: [ on  ]  # HAVE_LIBNUMA_SUPPORT
                  libperl: [ on  ]  # HAVE_LIBPERL_SUPPORT
                libpython: [ on  ]  # HAVE_LIBPYTHON_SUPPORT
                 libslang: [ on  ]  # HAVE_SLANG_SUPPORT
                libcrypto: [ on  ]  # HAVE_LIBCRYPTO_SUPPORT
                libunwind: [ on  ]  # HAVE_LIBUNWIND_SUPPORT
       libdw-dwarf-unwind: [ on  ]  # HAVE_DWARF_SUPPORT
                     zlib: [ on  ]  # HAVE_ZLIB_SUPPORT
                     lzma: [ on  ]  # HAVE_LZMA_SUPPORT
                get_cpuid: [ on  ]  # HAVE_AUXTRACE_SUPPORT
                      bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT
                      aio: [ on  ]  # HAVE_AIO_SUPPORT
                     zstd: [ on  ]  # HAVE_ZSTD_SUPPORT
                  libpfm4: [ OFF ]  # HAVE_LIBPFM
   # perf test
    1: vmlinux symtab matches kallsyms                                 : Ok
    2: Detect openat syscall event                                     : Ok
    3: Detect openat syscall event on all cpus                         : Ok
    4: Read samples using the mmap interface                           : Ok
    5: Test data source output                                         : Ok
    6: Parse event definition strings                                  : Ok
    7: Simple expression parser                                        : Ok
    8: PERF_RECORD_* events & perf_sample fields                       : Ok
    9: Parse perf pmu format                                           : Ok
   10: PMU events                                                      :
   10.1: PMU event table sanity                                        : Ok
   10.2: PMU event map aliases                                         : Ok
   10.3: Parsing of PMU event table metrics                            : Ok
   10.4: Parsing of PMU event table metrics with fake PMUs             : Ok
   11: DSO data read                                                   : Ok
   12: DSO data cache                                                  : Ok
   13: DSO data reopen                                                 : Ok
   14: Roundtrip evsel->name                                           : Ok
   15: Parse sched tracepoints fields                                  : Ok
   16: syscalls:sys_enter_openat event fields                          : Ok
   17: Setup struct perf_event_attr                                    : Ok
   18: Match and link multiple hists                                   : Ok
   19: 'import perf' in python                                         : Ok
   20: Breakpoint overflow signal handler                              : Ok
   21: Breakpoint overflow sampling                                    : Ok
   22: Breakpoint accounting                                           : Ok
   23: Watchpoint                                                      :
   23.1: Read Only Watchpoint                                          : Skip (missing hardware support)
   23.2: Write Only Watchpoint                                         : Ok
   23.3: Read / Write Watchpoint                                       : Ok
   23.4: Modify Watchpoint                                             : Ok
   24: Number of exit events of a simple workload                      : Ok
   25: Software clock events period values                             : Ok
   26: Object code reading                                             : Ok
   27: Sample parsing                                                  : Ok
   28: Use a dummy software event to keep tracking                     : Ok
   29: Parse with no sample_id_all bit set                             : Ok
   30: Filter hist entries                                             : Ok
   31: Lookup mmap thread                                              : Ok
   32: Share thread maps                                               : Ok
   33: Sort output of hist entries                                     : Ok
   34: Cumulate child hist entries                                     : Ok
   35: Track with sched_switch                                         : Ok
   36: Filter fds with revents mask in a fdarray                       : Ok
   37: Add fd to a fdarray, making it autogrow                         : Ok
   38: kmod_path__parse                                                : Ok
   39: Thread map                                                      : Ok
   40: LLVM search and compile                                         :
   40.1: Basic BPF llvm compile                                        : Ok
   40.2: kbuild searching                                              : Ok
   40.3: Compile source for BPF prologue generation                    : Ok
   40.4: Compile source for BPF relocation                             : Ok
   41: Session topology                                                : Ok
   42: BPF filter                                                      :
   42.1: Basic BPF filtering                                           : Ok
   42.2: BPF pinning                                                   : Ok
   42.3: BPF prologue generation                                       : Ok
   42.4: BPF relocation checker                                        : Ok
   43: Synthesize thread map                                           : Ok
   44: Remove thread map                                               : Ok
   45: Synthesize cpu map                                              : Ok
   46: Synthesize stat config                                          : Ok
   47: Synthesize stat                                                 : Ok
   48: Synthesize stat round                                           : Ok
   49: Synthesize attr update                                          : Ok
   50: Event times                                                     : Ok
   51: Read backward ring buffer                                       : Ok
   52: Print cpu map                                                   : Ok
   53: Merge cpu map                                                   : Ok
   54: Probe SDT events                                                : Ok
   55: is_printable_array                                              : Ok
   56: Print bitmap                                                    : Ok
   57: perf hooks                                                      : Ok
   58: builtin clang support                                           : Skip (not compiled in)
   59: unit_number__scnprintf                                          : Ok
   60: mem2node                                                        : Ok
   61: time utils                                                      : Ok
   62: Test jit_write_elf                                              : Ok
   63: Test libpfm4 support                                            : Skip (not compiled in)
   64: Test api io                                                     : Ok
   65: maps__merge_in                                                  : Ok
   66: Demangle Java                                                   : Ok
   67: Parse and process metrics                                       : Ok
   68: PE file support                                                 : Ok
   69: Event expansion for cgroups                                     : Ok
   70: Convert perf time to TSC                                        : Ok
   71: x86 rdpmc                                                       : Ok
   72: DWARF unwind                                                    : Ok
   73: x86 instruction decoder - new instructions                      : Ok
   74: Intel PT packet decoder                                         : Ok
   75: x86 bp modify                                                   : Ok
   76: probe libc's inet_pton & backtrace it with ping                 : Ok
   77: Use vfs_getname probe to get syscall args filenames             : Ok
   78: Check Arm CoreSight trace data recording and synthesized samples: Skip
   79: perf stat metrics (shadow stat) test                            : Ok
   80: build id cache operations                                       : Ok
   81: Add vfs_getname probe to get syscall args filenames             : Ok
   82: Check open filename arg using perf trace + vfs_getname          : Ok
   83: Zstd perf.data compression/decompression                        : Ok
   #
 
   $ make -C tools/perf build-test
   make: Entering directory '/home/acme/git/perf/tools/perf'
   - tarpkg: ./tests/perf-targz-src-pkg .
   - /home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP: make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP  feature-dump
   make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP feature-dump
                  make_perf_o_O: make perf.o
                  make_cscope_O: make cscope
                 make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
         make_with_babeltrace_O: make LIBBABELTRACE=1
             make_install_bin_O: make install-bin
                    make_help_O: make help
   make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
               make_no_libelf_O: make NO_LIBELF=1
             make_no_demangle_O: make NO_DEMANGLE=1
   - /home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC: make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC  LDFLAGS='-static' feature-dump
   make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC LDFLAGS='-static' feature-dump
                  make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
                 make_no_gtk2_O: make NO_GTK2=1
            make_no_backtrace_O: make NO_BACKTRACE=1
        make_util_pmu_bison_o_O: make util/pmu-bison.o
              make_no_libnuma_O: make NO_LIBNUMA=1
                   make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
                   make_debug_O: make DEBUG=1
              make_util_map_o_O: make util/map.o
                make_no_slang_O: make NO_SLANG=1
                    make_tags_O: make tags
          make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
                    make_pure_O: make
                 make_install_O: make install
               make_no_libbpf_O: make NO_LIBBPF=1
               make_clean_all_O: make clean all
         make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
            make_no_libcrypto_O: make NO_LIBCRYPTO=1
                     make_doc_O: make doc
              make_no_libperl_O: make NO_LIBPERL=1
               make_with_gtk2_O: make GTK2=1
            make_no_libbionic_O: make NO_LIBBIONIC=1
             make_no_libaudit_O: make NO_LIBAUDIT=1
            make_no_libpython_O: make NO_LIBPYTHON=1
             make_no_auxtrace_O: make NO_AUXTRACE=1
          make_install_prefix_O: make install prefix=/tmp/krava
          make_with_clangllvm_O: make LIBCLANGLLVM=1
            make_no_libunwind_O: make NO_LIBUNWIND=1
                 make_no_newt_O: make NO_NEWT=1
              make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
                  make_no_sdt_O: make NO_SDT=1
            make_with_libpfm4_O: make LIBPFM4=1
    make_install_prefix_slash_O: make install prefix=/tmp/krava/
   OK
   make: Leaving directory '/home/acme/git/perf/tools/perf'
   $
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYArSrgAKCRCyPKLppCJ+
 J3ChAP0bv2ggYKptupmTplXhiSjfhARtjU4w4GgIXVOT890CqwEAlFcFpE/GHMva
 8fUFmBOsr74Oux+6QUaTFw90rdKKjQk=
 =GVY4
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix id index used in Intel PT for heterogeneous systems

 - Fix overrun issue in 'perf script' for dynamically-allocated PMU type
   number

 - Fix 'perf stat' metrics containing the 'duration_time' synthetic
   event

 - Fix system PMU 'perf stat' metrics

* tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf script: Fix overrun issue for dynamically-allocated PMU type number
  perf metricgroup: Fix system PMU metrics
  perf metricgroup: Fix for metrics containing duration_time
  perf evlist: Fix id index for heterogeneous systems
2021-01-22 13:55:00 -08:00
Linus Torvalds
9887e9af2d platform-drivers-x86 for v5.11-2
A small collection of bug-fixes and model-specific quirks for 5.11.
 
 The following is an automated git shortlog grouped by driver:
 
 amd-pmc:
  -  Fix CONFIG_DEBUG_FS check
 
 hp-wmi:
  -  Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
 
 i2c-multi-instantiate:
  -  Don't create platform device for INT3515 ACPI nodes
 
 ideapad-laptop:
  -  Disable touchpad_switch for ELAN0634
 
 intel-vbtn:
  -  Drop HP Stream x360 Convertible PC 11 from allow-list
  -  Support for tablet mode on Dell Inspiron 7352
 
 platform/surface:
  -  SURFACE_PLATFORMS should depend on ACPI
  -  surface_gpe: Fix non-PM_SLEEP build warnings
 
 thinkpad_acpi:
  -  Add P53/73 firmware to fan_quirk_table for dual fan control
  -  correct palmsensor error checking
 
 tools/power/x86/intel-speed-select:
  -  Set higher of cpuinfo_max_freq or base_frequency
  -  Set scaling_max_freq to base_frequency
 
 touchscreen_dmi:
  -  Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAKkwMUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wSKQf9Gr04Nb+F50SReA+OA9nrAjvm9m1b
 HKl0hSXQXTDydsKyJ7WujtuiW4MocMjSkLQQpL9CEfdPdhCCVld/2lpMsE7F6VcJ
 wto0DZATbNwdACeiDSPcORYThpbIC+pzYHgQRJJWX31vR2aRqpi8mmzg0VBQdKco
 IMFoyg5HrD1ZS20Zw0Ho4bBbZFeE0J3NegcU9tloo6AS5PJeadDeHaiSjMedPecP
 squrCBni3hC04NTaIRX2yODVvQjopR0XV4H4YKd8UxyU3yW6UfG4rK11UHOmZHTd
 qdOdgUQqUn8Y2lgOZJbkoP+wpbJSYbYberQUC43PltWpf++JLhhS7GNLEA==
 =EU2D
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A small collection of bug-fixes and model-specific quirks"

* tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control
  platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
  platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list
  platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634
  platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check
  platform/x86: thinkpad_acpi: correct palmsensor error checking
  platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
  platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
  platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes
  platform/surface: SURFACE_PLATFORMS should depend on ACPI
  platform/surface: surface_gpe: Fix non-PM_SLEEP build warnings
  tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency
  tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency
2021-01-22 13:38:40 -08:00
Josh Poimboeuf
1d489151e9 objtool: Don't fail on missing symbol table
Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.

We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.

Just ignore it and move on.

Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-21 15:49:58 -06:00
Josh Poimboeuf
655cf86548 objtool: Don't fail the kernel build on fatal errors
This is basically a revert of commit 644592d328 ("objtool: Fail the
kernel build on fatal errors").

That change turned out to be more trouble than it's worth.  Failing the
build is an extreme measure which sometimes gets too much attention and
blocks CI build testing.

These fatal-type warnings aren't yet as rare as we'd hope, due to the
ever-increasing matrix of supported toolchains/plugins and their
fast-changing nature as of late.

Also, there are more people (and bots) looking for objtool warnings than
ever before, so even non-fatal warnings aren't likely to be ignored for
long.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-21 15:49:39 -06:00
Jin Yao
8adc0a06d6 perf script: Fix overrun issue for dynamically-allocated PMU type number
When unpacking the event which is from dynamic PMU, the array
output[OUTPUT_TYPE_MAX] may be overrun. For example, type number of SKL
uncore_imc is 10, but OUTPUT_TYPE_MAX is 7 now (OUTPUT_TYPE_MAX =
PERF_TYPE_MAX + 1).

/* In builtin-script.c */

process_event()
{
        unsigned int type = output_type(attr->type);

        if (output[type].fields == 0)
                return;
}

output[10] is overrun.

Create a type OUTPUT_TYPE_OTHER for dynamic PMU events, then
output_type(attr->type) will return OUTPUT_TYPE_OTHER here.

Note that if PERF_TYPE_MAX ever changed, then there would be a conflict
between old perf.data files that had a dynamicaliy allocated PMU number
that would then be the same as a fixed PERF_TYPE.

Example:

  # perf record --switch-events -C 0 -e "{cpu-clock,uncore_imc/data_reads/,uncore_imc/data_writes/}:SD" -a -- sleep 1
  # perf script

  Before:
         swapper     0 [000] 1479253.987551:     277766               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.987797:     246709               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.988127:     329883               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.988273:     146393               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.988523:     249977               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.988877:     354090               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.989023:     145940               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.989383:     359856               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.989523:     140082               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])

  After:
         swapper     0 [000] 1397040.402011:     272384               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1397040.402011:       5396  uncore_imc/data_reads/:
         swapper     0 [000] 1397040.402011:        967 uncore_imc/data_writes/:
         swapper     0 [000] 1397040.402259:     249153               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1397040.402259:       7231  uncore_imc/data_reads/:
         swapper     0 [000] 1397040.402259:       1297 uncore_imc/data_writes/:
         swapper     0 [000] 1397040.402508:     249108               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1397040.402508:       5333  uncore_imc/data_reads/:
         swapper     0 [000] 1397040.402508:       1008 uncore_imc/data_writes/:

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20201209005828.21302-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-21 17:25:33 -03:00
John Garry
3d6e79ee9e perf metricgroup: Fix system PMU metrics
Joakim reports that getting "perf stat" for multiple system PMU metrics
segfaults:

  $ perf stat -a -I 1000 -M imx8mm_ddr_write.all,imx8mm_ddr_write.all
  Segmentation fault
  $

While the same works without issue for a single metric.

The logic in metricgroup__add_metric_sys_event_iter() is broken, in that
add_metric() @m argument should be NULL for each new metric. Fix by not
passing a holder for that, and rather make local in
metricgroup__add_metric_sys_event_iter().

Fixes: be335ec28e ("perf metricgroup: Support adding metrics for system PMUs")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611050655-44020-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-21 17:25:33 -03:00
John Garry
9c880c24cb perf metricgroup: Fix for metrics containing duration_time
Metrics containing duration_time cause a segfault:

  $ perf stat -v -M L1D_Cache_Fill_BW sleep 1
  Using CPUID GenuineIntel-6-3D-4
  metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW
  found event duration_time
  found event l1d.replacement
  adding {l1d.replacement}:W,duration_time
  l1d.replacement -> cpu/umask=0x1,(null)=0x1e8483,event=0x51/
  Segmentation fault
  $

In commit c2337d6719 ("perf metricgroup: Fix metrics using aliases
covering multiple PMUs"), the logic in find_evsel_group() when iter'ing
events was changed to not only select events in same group, but also for
aliased PMUs.

Checking whether events were for aliased PMUs was done by comparing the
event PMU name. This was not safe for duration_time event, which has no
associated PMU (and no PMU name), so fix by checking if the event PMU name
is set also.

Committer testing:

Reproduced the bug, then, on a:

  $ grep -m1 ^'model name' /proc/cpuinfo
  model name	: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
  $

We now get:

  $ perf stat -M L1D_Cache_Fill_BW sleep 1

   Performance counter stats for 'sleep 1':

               4,141      l1d.replacement:u
       1,001,285,107 ns   duration_time:u

         1.001285107 seconds time elapsed

         0.000000000 seconds user
         0.001119000 seconds sys

  $

Detais from -v:

  Using CPUID GenuineIntel-6-8E-A
  metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW
  found event duration_time
  found event l1d.replacement
  adding {l1d.replacement}:W,duration_time
  l1d.replacement -> cpu/(null)=0x1e8483,umask=0x1,event=0x51/
  Control descriptor is not initialized
  Warning:
  kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor  samples
  Warning:
  kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor  samples
  l1d.replacement:u: 4592 612201 612201
  duration_time:u: 1001478621 1001478621 1001478621

Fixes: c2337d6719 ("perf metricgroup: Fix metrics using aliases covering multiple PMUs")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611159518-226883-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-21 17:25:33 -03:00
Adrian Hunter
fc705fecf3 perf evlist: Fix id index for heterogeneous systems
perf_evlist__set_sid_idx() updates perf_sample_id with the evlist map
index, CPU number and TID. It is passed indexes to the evsel's cpu and
thread maps, but references the evlist's maps instead. That results in
using incorrect CPU numbers on heterogeneous systems. Fix it by using
evsel maps.

The id index (PERF_RECORD_ID_INDEX) is used by AUX area tracing when in
sampling mode. Having an incorrect CPU number causes the trace data to
be attributed to the wrong CPU, and can result in decoder errors because
the trace data is then associated with the wrong process.

Committer notes:

Keep the class prefix convention in the function name, switching from
perf_evlist__set_sid_idx() to perf_evsel__set_sid_idx().

Fixes: 3c659eedad ("perf tools: Add id index")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210121125446.11287-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-21 17:25:33 -03:00
Linus Torvalds
d7631e4378 gpio fixes for v5.11-rc5
- rework the character device code to avoid a frame size warning
 - fix printk format issues in gpio-tools
 - warn on redefinition of the to_irq callback in core gpiolib code
 - fix PWM period calculation in gpio-mvebu
 - make gpio-sifive Kconfig entry consistent with other drivers
 - fix a build issue in gpio-tegra
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmAJSRUACgkQEacuoBRx
 13INyQ/8CXh1/nBTx8LkLPNXkmv/RTA0AKjEBuhY/VVYHwhhZ17rTisc3+2LfQ4N
 dbS1taI5J1GVqk8yrKrcjESZxAuduwokhR5ciRZbHDFMEii6hhH7RuN7Evxd9DCr
 1kMhv0X/dRG/C6xAawP6nS8wpf/tOzv71wBpp7MT//ZzZGWx49jMtyEkqijjqH8n
 lQnoZdBw7vMVvxhXa6WXc3i9N8hAOS3YAFAs9NtDvabGpvIaCSgU43e4we6pYHND
 0OHD2+V3FYpRYsenoOmOoRLZheMQ/Z0DjWKkvBQburl1n6ZLaCtdjAi1MoG5FhbN
 49VJhyPTOlw1xsmTm/2Fg4WzktDi95gsQzef25bhhTBVoETOen6gBxK2RsdUmpzm
 zQX1wUrINGfzcfQhStIvjyznHZRabGuxDlFN9UH3mGnDVzWepuqCvY9s2/zmU4eU
 OtCTWsM9TTmlRiU/bIqC5/aSJyZJ/d1stiacRCsfPJ4Gmb4zsm9y/cILMporiRPJ
 JEd4T0jUSo94QLcrSSse15TBVVOA9TydFrDgVE3HBAZbqf+eaRG/fYKRABs6cX+H
 VNhIRi1mjj2rr1UwmCYcEtuT3ODthXS7lTAGmLt7hAzSHCxMsO+pSQ2BPdGanb9O
 GKWs/owyZm1be4e3yVdQfrQ4/+LimqpyN8uDSU4RbfuNrHiSLxw=
 =1H0g
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - rework the character device code to avoid a frame size warning

 - fix printk format issues in gpio-tools

 - warn on redefinition of the to_irq callback in core gpiolib code

 - fix PWM period calculation in gpio-mvebu

 - make gpio-sifive Kconfig entry consistent with other drivers

 - fix a build issue in gpio-tegra

* tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: tegra: Add missing dependencies
  gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on it
  gpio: mvebu: fix pwm .get_state period calculation
  gpiolib: add a warning on gpiochip->to_irq defined
  tools: gpio: fix %llu warning in gpio-watch.c
  tools: gpio: fix %llu warning in gpio-event-mon.c
  gpiolib: cdev: fix frame size warning in gpio_ioctl()
2021-01-21 11:19:59 -08:00
Linus Torvalds
75439bc439 Networking fixes for 5.11-rc5, including fixes from bpf, wireless,
and can trees.
 
 Current release - regressions:
 
  - nfc: nci: fix the wrong NCI_CORE_INIT parameters
 
 Current release - new code bugs:
 
  - bpf: allow empty module BTFs
 
 Previous releases - regressions:
 
  - bpf: fix signed_{sub,add32}_overflows type handling
 
  - tcp: do not mess with cloned skbs in tcp_add_backlog()
 
  - bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach
 
  - bpf: don't leak memory in bpf getsockopt when optlen == 0
 
  - tcp: fix potential use-after-free due to double kfree()
 
  - mac80211: fix encryption issues with WEP
 
  - devlink: use right genl user_ptr when handling port param get/set
 
  - ipv6: set multicast flag on the multicast route
 
  - tcp: fix TCP_USER_TIMEOUT with zero window
 
 Previous releases - always broken:
 
  - bpf: local storage helpers should check nullness of owner ptr passed
 
  - mac80211: fix incorrect strlen of .write in debugfs
 
  - cls_flower: call nla_ok() before nla_next()
 
  - skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmAIa+UACgkQMUZtbf5S
 IruZTQ/+O263ZyI0C5S1uCbHPCsAyjZyxECWDNfQ3tRzTfvldoRRP4YbC1ekSoXu
 8Y9GKDDLMI2pYkNlCqfMhrFaop8sudosntOZDSeRm/2TkkQFnkM/bxAlz++7Rnwx
 vHu1Xo2t2bKJxooSw8gLJ5iZNTbkw/M5iA3qR9kP+BG1yDP7By4P/Y4ziFphffad
 gPlfLQaU8nRVuDBYYrGIX0GoMg05IH1zt2/MxvN4ReXuex/9tq2TrU8jxHiwT2ja
 K1DHR+g2VVZf55TWrL9Yw8V5Rr+F7bxf6i+yer9hWWhENXgoTv6QkndAnTFOcoat
 VQh44GzoNoL1dAHD8kyUOOxJCyjItJJe58Evcwjnls4o+5BC2aDNQADwrSyz3sHe
 l9iNMSMEylymu7Xu+cJw2kjOq/BK6TdjaGSxwm1M2ErPehf36eJuc4FkaJz3RO55
 nkYMfm0+5rYWSsR5CTTJp8r2urCAT4SSx1iLoZknUXE6qa5AcMSNhIjGbw6pUp4q
 RDBtAKqiV0l37vdUag4Z+QgjPA0cH9E4aMQKYmD9dop20Zuzp4ug38qR32aEFC6q
 Qfb0VBMKgwu6OWjuWARbwYktVQNcoelKiGnsGnORJ5S9cyc1N4HeKEnb5Hw8ky5q
 4FBpNMfx3Ief14iNkh65KrzA+uyZBjqEG+joTSzn+9R7Lof60QA=
 =KyY7
 -----END PGP SIGNATURE-----

Merge tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and
  can trees.

  Current release - regressions:

   - nfc: nci: fix the wrong NCI_CORE_INIT parameters

  Current release - new code bugs:

   - bpf: allow empty module BTFs

  Previous releases - regressions:

   - bpf: fix signed_{sub,add32}_overflows type handling

   - tcp: do not mess with cloned skbs in tcp_add_backlog()

   - bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach

   - bpf: don't leak memory in bpf getsockopt when optlen == 0

   - tcp: fix potential use-after-free due to double kfree()

   - mac80211: fix encryption issues with WEP

   - devlink: use right genl user_ptr when handling port param get/set

   - ipv6: set multicast flag on the multicast route

   - tcp: fix TCP_USER_TIMEOUT with zero window

  Previous releases - always broken:

   - bpf: local storage helpers should check nullness of owner ptr passed

   - mac80211: fix incorrect strlen of .write in debugfs

   - cls_flower: call nla_ok() before nla_next()

   - skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too"

* tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
  net: systemport: free dev before on error path
  net: usb: cdc_ncm: don't spew notifications
  net: mscc: ocelot: Fix multicast to the CPU port
  tcp: Fix potential use-after-free due to double kfree()
  bpf: Fix signed_{sub,add32}_overflows type handling
  can: peak_usb: fix use after free bugs
  can: vxcan: vxcan_xmit: fix use after free bug
  can: dev: can_restart: fix use after free bug
  tcp: fix TCP socket rehash stats mis-accounting
  net: dsa: b53: fix an off by one in checking "vlan->vid"
  tcp: do not mess with cloned skbs in tcp_add_backlog()
  selftests: net: fib_tests: remove duplicate log test
  net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
  sh_eth: Fix power down vs. is_opened flag ordering
  net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
  netfilter: rpfilter: mask ecn bits before fib lookup
  udp: mask TOS bits in udp_v4_early_demux()
  xsk: Clear pool even for inactive queues
  bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
  sh_eth: Make PHY access aware of Runtime PM to fix reboot crash
  ...
2021-01-20 11:52:21 -08:00
Arnaldo Carvalho de Melo
cd07e536b0 Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:35:31 -03:00
Jiri Olsa
47fddcb479 perf tools: Add 'ping' control command
Add a control 'ping' command to detect if perf is up and its control
interface is operational.

It will be used in following daemon patches to synchronize with record
session - when control interface is up and running, we know that perf
record is monitoring and ready to receive signals.

Example session:

  terminal 1:

    # mkfifo control ack
    # perf record --control=fifo:control,ack

  terminal 2:

    # echo ping > control
    # cat ack
    ack

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:21 -03:00
Jiri Olsa
f186cd6148 perf tools: Add 'stop' control command
Adding control 'stop' command to stop perf record.

When it is received, perf will set the 'done' variable to 1 to stop its
mmap ring buffer reading loop.

Example session:

  terminal 1:
    # mkfifo control ack
    # perf record --control=fifo:control,ack

  terminal 2:
    # echo stop > control

  terminal 1:
    [ perf record: Woken up 7 times to write data ]
    [ perf record: Captured and wrote 3.214 MB perf.data (38280 samples) ]
    #

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:21 -03:00
Jiri Olsa
142544a938 perf tools: Add 'evlist' control command
Add a new 'evlist' control command to display all the evlist events.
When it is received, perf will scan and print current evlist into perf
record terminal.

The interface string for control file is:

  evlist [-v|-g|-F]

The syntax follows perf evlist command:
  -F  Show just the sample frequency used for each event.
  -v  Show all fields.
  -g  Show event group information.

Example session:

  terminal 1:
    # mkfifo control ack
    # perf record --control=fifo:control,ack -e '{cycles,instructions}'

  terminal 2:
    # echo evlist > control

  terminal 1:
    cycles
    instructions
    dummy:HG

  terminal 2:
    # echo 'evlist -v' > control

  terminal 1:
    cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type:            \
    IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1,    \
    sample_id_all: 1, exclude_guest: 1
    instructions: size: 120, config: 0x1, { sample_period, sample_freq }: 4000,      \
    sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, freq: 1,    \
    sample_id_all: 1, exclude_guest: 1
    dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, \
    sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, mmap: 1,    \
    comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, \
     bpf_event: 1

  terminal 2:
    # echo 'evlist -g' > control

  terminal 1:
    {cycles,instructions}
    dummy:HG

  terminal 2:
    # echo 'evlist -F' > control

  terminal 1:
    cycles: sample_freq=4000
    instructions: sample_freq=4000
    dummy:HG: sample_freq=4000

This new evlist command is handy to get real event names when
wildcards are used.

Adding evsel_fprintf.c object to python/perf.so build, because
it's now evlist.c dependency.

Adding PYTHON_PERF define for python/perf.so compilation, so we
can use it to compile in only evsel__fprintf from evsel_fprintf.c
object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:21 -03:00
Jiri Olsa
991ae4eb36 perf tools: Allow to enable/disable events via control file
Adding new control events to enable/disable specific event.
The interface string for control file are:

  'enable <EVENT NAME>'
  'disable <EVENT NAME>'

when received the command, perf will scan the current evlist
for <EVENT NAME> and if found it's enabled/disabled.

Example session:

  terminal 1:
    # mkfifo control ack perf.pipe
    # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe

  terminal 2:
    # cat perf.pipe | perf --no-pager script -i -

  terminal 1:
    Events disabled

  NOTE Above message will show only after read side of the pipe ('>')
  is started on 'terminal 2'. The 'terminal 1's bash does not execute
  perf before that, hence the delyaed perf record message.

  terminal 3:
    # echo 'enable sched:sched_process_fork' > control

  terminal 1:
    event sched:sched_process_fork enabled

  terminal 2:
    bash 33349 [034] 149587.674295: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34056
    bash 33349 [034] 149588.239521: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34057

  terminal 3:
    # echo 'enable sched:sched_wakeup_new' > control

  terminal 1:
    event sched:sched_wakeup_new enabled

  terminal 2:
    bash 33349 [034] 149632.228023: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34059
    bash 33349 [034] 149632.228050:   sched:sched_wakeup_new: bash:34059 [120] success=1 CPU:036
    bash 33349 [034] 149633.950005: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34060
    bash 33349 [034] 149633.950030:   sched:sched_wakeup_new: bash:34060 [120] success=1 CPU:036

Committer testing:

If I use 'sched:*' and then enable all events, I can't get 'perf record'
to react to further commands, so I tested it with:

  [root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
  Events disabled
  Events enabled
  Events disabled

And then it works as expected, so we need to fix this pre-existing
problem.

Another issue, we need to check if a event is already enabled or
disabled and change the message to be clearer, i.e.:

  [root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
  Events disabled

If we receive a 'disable' command, then it should say:

  [root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
  Events disabled
  Events already disabled

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:21 -03:00
Jiri Olsa
e8b2db0781 perf config: Make perf_config_global() global
Make perf_config_global global, it will be used outside the config.c
object in the following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:21 -03:00
Jiri Olsa
b2946282c0 perf config: Make perf_config_system() global
Make perf_config_system global, it will be used outside the config.c
object in the following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Jiri Olsa
f5f03e19ce perf config: Add perf_home_perfconfig function
Factor out the perf_home_perfconfig, that looks for .perfconfig in home
directory including check for PERF_CONFIG_NOGLOBAL and for proper
permission.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Jiri Olsa
bcbd79d1cf perf debug: Add debug_set_display_time function
Allow to display time in perf debug output via new
debug_set_display_time function.

It will be used in perf daemon command to get verbose output into log
file.

The debug time format is:

  [2020-12-03 18:25:31.822152] affinity: SYS
  [2020-12-03 18:25:31.822164] mmap flush: 1
  [2020-12-03 18:25:31.822175] comp level: 0
  [2020-12-03 18:25:32.002047] mmap size 528384B

Committer notes:

Cast tod.tv_usec to long to avoid this problem:

    78    12.70 ubuntu:18.04-x-sparc64        : FAIL sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0

  util/debug.c: In function 'fprintf_time':
  util/debug.c:63:32: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type '__suseconds_t {aka int}' [-Werror=format=]
    return fprintf(file, "[%s.%06lu] ", date, tod.tv_usec);
                              ~~~~^           ~~~~~~~~~~~
                              %06u

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Jiri Olsa
a523026cac perf config: Add config set interface
Add interface to load config set from custom file by using
perf_config_set__load_file function.

It will be used in perf daemon command to process custom config file.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Jiri Olsa
64b9705b54 perf config: Make perf_config_from_file() static
It's not used outside config.c object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Stephane Eranian
d8eda89805 perf test: Add test case for PERF_SAMPLE_CODE_PAGE_SIZE
Extend sample-parsing test cases to support new sample type
PERF_SAMPLE_CODE_PAGE_SIZE.

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-7-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Stephane Eranian
9fd74f209c perf report: Add support for PERF_SAMPLE_CODE_PAGE_SIZE
Add a new sort dimension "code_page_size" for common sort.
With this option applied, perf can sort and report by sample's code page
size.

For example:

  # perf report --stdio --sort=comm,symbol,code_page_size
  # To display the perf.data header info, please use
  # --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 3K of event 'mem-loads:uP'
  # Event count (approx.): 1470769
  #
  # Overhead  Command  Symbol                        Code Page Size IPC [IPC Coverage]
  # ........  .......  ............................  .............. ....................
  #
      69.56%  dtlb     [.] GetTickCount              4K              -   -
      17.93%  dtlb     [.] Calibrate                 4K              -   -
      11.40%  dtlb     [.] __gettimeofday            4K              -   -
  #

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-6-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Stephane Eranian
c513de8a70 perf script: Add support for PERF_SAMPLE_CODE_PAGE_SIZE
Display sampled code page sizes when PERF_SAMPLE_CODE_PAGE_SIZE was set.

For example:

  # perf script --fields comm,event,ip,code_page_size
            dtlb mem-loads:uP:            445777 4K
            dtlb mem-loads:uP:            40f724 4K
            dtlb mem-loads:uP:            474926 4K
            dtlb mem-loads:uP:            401075 4K
            dtlb mem-loads:uP:            401095 4K
            dtlb mem-loads:uP:            401095 4K
            dtlb mem-loads:uP:            4010cc 4K
            dtlb mem-loads:uP:            440b6f 4K
  #

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-5-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Kan Liang
c1de7f3d84 perf record: Add support for PERF_SAMPLE_CODE_PAGE_SIZE
Adds the infrastructure to sample the code address page size.

Introduce a new --code-page-size option for perf record.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Originally-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Kan Liang
06280e3b15 perf mem: Support data page size
Add option --data-page-size in "perf mem" to record/report data page
size.

Here are some examples:

  # perf mem --phys-data --data-page-size report -D
  # PID, TID, IP, ADDR, PHYS ADDR, DATA PAGE SIZE, LOCAL WEIGHT, DSRC, SYMBOL
  20134 20134 0xffffffffb5bd2fd0 0x016ffff9a274e96a308 0x000000044e96a308 4K  1168 0x5080144 /lib/modules/4.18.0-rc7+/build/vmlinux:perf_ctx_unlock
  20134 20134 0xffffffffb63f645c 0xffffffffb752b814 0xcfb52b814 2M 225 0x26a100142 /lib/modules/4.18.0-rc7+/build/vmlinux:_raw_spin_lock
  20134 20134 0xffffffffb660300c 0xfffffe00016b8bb0 0x0 4K 0 0x5080144 /lib/modules/4.18.0-rc7+/build/vmlinux:__x86_indirect_thunk_rax
  #

  # perf mem --phys-data --data-page-size report --stdio
  # To display the perf.data header info, please use
  # --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 5K of event 'cpu/mem-loads,ldlat=30/P'
  # Total weight : 281234
  # Sort order   :
  # mem,sym,dso,symbol_daddr,dso_daddr,tlb,locked,phys_daddr,data_page_size
  #
  # Overhead  Samples  Memory access  Symbol                        Shared Object     Data Symbol             Data Object  TLB access    Locked  Data Physical Address   Data Page Size
  # ........  .......  .............  ............................  ................  ......................  ...........  ............  ......  ......................  ..............

    28.54%     1826    L1 or L1 hit   [k] __x86_indirect_thunk_rax  [kernel.vmlinux]  [k] 0xffffb0df31b0ff28  [unknown]    L1 or L2 hit  No      [k] 0x0000000000000000  4K
     6.02%      256    L1 or L1 hit   [.] touch_buffer              dtlb              [.] 0x00007ffd50109da8  [stack]      L1 or L2 hit  No      [.] 0x000000042454ada8  4K
     3.23%        5    L1 or L1 hit   [k] clear_huge_page           [kernel.vmlinux]  [k] 0xffff9a2753b8ce60  [unknown]    L1 or L2 hit  No      [k] 0x0000000453b8ce60  2M
     2.98%        4    L1 or L1 hit   [k] clear_page_erms           [kernel.vmlinux]  [k] 0xffffb0df31b0fd00  [unknown]    L1 or L2 hit  No      [k] 0x0000000000000000  4K

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Kan Liang
407ee5c920 perf mem: Clean up output format
Now, "--phys-data" is the only option which impacts the output format.

A simple "if else" is enough to handle the option. But there will be
more options added, e.g. "--data-page-size", which also impact the
output format. The code will become too complex to be maintained.

Divide the big printf into several small pieces. Output the specific
piece only if the related option is applied.

No functional change.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
James Clark
80ec45d9f6 perf cs-etm: Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0
Replace the OCSD_INSTR switch statement with an if to fix compilation
error about unhandled values and avoid this issue again in the future.

Add new OCSD_GEN_TRC_ELEM_SYNC_MARKER and OCSD_GEN_TRC_ELEM_MEMTRANS
enum values to fix unhandled value compilation error. Currently they are
ignored.

Increase the minimum version number to v1.0.0 now that new enum values
are used that are only present in this version.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210108142752.27872-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Leo Yan
0998d96048 perf c2c: Add local variables for output metrics
This patch adds several local variables:

  "cl_output": pointer for outputting single cache line metrics;
  "output_str": pointer for outputting cache line metrics;
  "sort_str": pointer to the sorting metrics.

This can improve readability for the code and it's more flexible when
later extend to different strings for the output metrics.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-7-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Leo Yan
f3d0a551db perf c2c: Refactor node display
The macro DISPLAY_HITM() is used to calculate HITM percentage introduced
by every node and it's shown for the node info.

This patch introduces the static function display_metrics() to replace
the macro, and the parameters are refined for passing the metric's
statistic and sum value.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Leo Yan
111c141591 perf c2c: Fix argument type for percent()
For percent() its arguments are defined as integers; this is not
consistent with its consumers which pass u32 arguments.

Thus this patch makes argument type as u32 for percent().

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Leo Yan
69a95bfdf9 perf c2c: Refactor display filter
When sorting on the respective metrics (lcl_hitm, rmt_hitm, tot_hitm),
the FILTER_HITM macro is used to filter out the cache line entries if
its overhead is less than 1%.

This patch introduces a static function filter_display() to replace that
macro and refines its parameters with a more flexible way, rather than
passing field name, it changes to pass the cache line's statistic and
sum value.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Leo Yan
2290e1d619 perf c2c: Refactor hist entry validation
This patch has no functionality changes but refactors hist entry
validation for cache line resorting.

It renames function "valid_hitm_or_store()" to "is_valid_hist_entry()",
changes return type from integer type to bool type.  In the function,
it uses switch-case instead of ternary operators, which is easier
to extend for more display types.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:34:20 -03:00
Leo Yan
1834436e34 perf c2c: Rename for shared cache line stats
For shared cache line statistics, 'perf c2c' relies on HITM.  We can use
more general naming rather than only binding to HITM, so replace
"hitm_stats" with "shared_clines_stats" in structure perf_c2c, and
rename function resort_hitm_cb() to resort_shared_cl_cb().

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20210114154646.209024-2-leo.yan@linaro.org
2021-01-20 14:34:20 -03:00
Song Liu
fa853c4b83 perf stat: Enable counting events for BPF programs
Introduce 'perf stat -b' option, which counts events for BPF programs, like:

  [root@localhost ~]# ~/perf stat -e ref-cycles,cycles -b 254 -I 1000
     1.487903822            115,200      ref-cycles
     1.487903822             86,012      cycles
     2.489147029             80,560      ref-cycles
     2.489147029             73,784      cycles
     3.490341825             60,720      ref-cycles
     3.490341825             37,797      cycles
     4.491540887             37,120      ref-cycles
     4.491540887             31,963      cycles

The example above counts 'cycles' and 'ref-cycles' of BPF program of id
254.  This is similar to bpftool-prog-profile command, but more
flexible.

'perf stat -b' creates per-cpu perf_event and loads fentry/fexit BPF
programs (monitor-progs) to the target BPF program (target-prog). The
monitor-progs read perf_event before and after the target-prog, and
aggregate the difference in a BPF map. Then the user space reads data
from these maps.

A new 'struct bpf_counter' is introduced to provide a common interface
that uses BPF programs/maps to count perf events.

Committer notes:

Removed all but bpf_counter.h includes from evsel.h, not needed at all.

Also BPF map lookups for PERCPU_ARRAYs need to have as its value receive
buffer passed to the kernel libbpf_num_possible_cpus() entries, not
evsel__nr_cpus(evsel), as the former uses
/sys/devices/system/cpu/possible while the later uses
/sys/devices/system/cpu/online, which may be less than the 'possible'
number making the bpf map lookup overwrite memory and cause hard to
debug memory corruption.

We need to continue using evsel__nr_cpus(evsel) when accessing the
perf_counts array tho, not to overwrite another are of memory :-)

Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/20210120163031.GU12699@kernel.org/
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lore.kernel.org/lkml/20201229214214.3413833-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20 14:25:28 -03:00
Hangbin Liu
fd23d2dc18 selftests: net: fib_tests: remove duplicate log test
The previous test added an address with a specified metric and check if
correspond route was created. I somehow added two logs for the same
test. Remove the duplicated one.

Reported-by: Antoine Tenart <atenart@redhat.com>
Fixes: 0d29169a70 ("selftests/net/fib_tests: update addr_metric_test for peer route testing")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19 17:03:16 -08:00