Defining DEBUG should only be done in development.
So remove DEBUG.
Link: https://lkml.kernel.org/r/20210115153348.131791-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The state of the interrupts (irqflags) and the preemption counter are
both passed down to tracing_generic_entry_update(). Only one bit of
irqflags is actually required: The on/off state. The complete 32bit
of the preemption counter isn't needed. Just whether of the upper bits
(softirq, hardirq and NMI) are set and the preemption depth is needed.
The irqflags and the preemption counter could be evaluated early and the
information stored in an integer `trace_ctx'.
tracing_generic_entry_update() would use the upper bits as the
TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth
(considering that one must be substracted from the counter in one
special cases).
The actual preemption value is not used except for the tracing record.
The `irqflags' variable is mostly used only for the tracing record. An
exception here is for instance wakeup_tracer_call() or
probe_wakeup_sched_switch() which explicilty disable interrupts and use
that `irqflags' to save (and restore) the IRQ state and to record the
state.
Struct trace_event_buffer has also the `pc' and flags' members which can
be replaced with `trace_ctx' since their actual value is not used
outside of trace recording.
This will reduce tracing_generic_entry_update() to simply assign values
to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved
to _tracing_gen_ctx_flags() which replaces preempt_count() and
local_save_flags() invocations.
As an example, ftrace_syscall_enter() may invoke:
- trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update()
- event_trigger_unlock_commit()
-> ftrace_trace_stack() -> … -> tracing_generic_entry_update()
-> ftrace_trace_userstack() -> … -> tracing_generic_entry_update()
In this case the TRACE_FLAG_* bits were evaluated three times. By using
the `trace_ctx' they are evaluated once and assigned three times.
A build with all tracers enabled on x86-64 with and without the patch:
text data bss dec hex filename
21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old
21970293 17084168 7639260 46693721 2c87d59 vmlinux.new
text shrank by 379 bytes, data remained constant.
Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As there's two struct ring_buffers in the kernel, it causes some confusion.
The other one being the perf ring buffer. It was agreed upon that as neither
of the ring buffers are generic enough to be used globally, they should be
renamed as:
perf's ring_buffer -> perf_buffer
ftrace's ring_buffer -> trace_buffer
This implements the changes to the ring buffer that ftrace uses.
Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As we are working to remove the generic "ring_buffer" name that is used by
both tracing and perf, the ring_buffer name for tracing will be renamed to
trace_buffer, and perf's ring buffer will be renamed to perf_buffer.
As there already exists a trace_buffer that is used by the trace_arrays, it
needs to be first renamed to array_buffer.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mmiotrace tracer cannot be enabled with ftrace=mmiotrace in kernel
commandline. With this patch, noboot is added to the tracer struct,
and when system boot with a tracer that has noboot=true, it will print
out a warning message and continue booting.
Link: http://lkml.kernel.org/r/1505111195-31942-1-git-send-email-zsun@redhat.com
Signed-off-by: Ziqian SUN (Zamir) <zsun@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Previously, mmio_print_pcidev() put "user" addresses in the trace buffer.
On most architectures, these are the same as CPU physical addresses, but on
microblaze, mips, powerpc, and sparc, they may be something else, typically
a raw BAR value (a bus address as opposed to a CPU address).
Always expose the CPU physical address to avoid this arch-dependent
behavior.
This change should have no user-visible effect because this file currently
depends on CONFIG_HAVE_MMIOTRACE_SUPPORT, which is only defined for x86,
and pci_resource_to_user() is a no-op on x86.
Link: http://lkml.kernel.org/r/20160511190657.5898.4248.stgit@bhelgaas-glaptop2.roam.corp.google.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use the more common logging method with the eventual goal of removing
pr_warning altogether.
Miscellanea:
- Realign arguments
- Coalesce formats
- Add missing space between a few coalesced formats
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for having trace options be per instance, the trace_array
needs to be passed to the trace_buffer_unlock_commit(). The
trace_event_buffer_lock_reserve() already passes in the trace_event_file
where the trace_array can be derived from.
Also added a "__init" to the boot up test event plus function tracing
function function_test_events_call().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structures ftrace_event_call and
ftrace_event_class have nothing to do with the function hooks, and are
really trace_event structures. Rename ftrace_event_* to trace_event_*.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The return values for trace_seq_printf() and friends are going to be
removed and they will become void functions. The mmio tracer checked
their return and even did so incorrectly.
Some of the funtions which returned the values were never checked
themselves. Removing all the checks simplifies the code.
Use trace_seq_has_overflowed() and trace_handle_return() where
necessary instead.
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace event filters are still tied to event calls rather than
event files, which means you don't get what you'd expect when using
filters in the multibuffer case:
Before:
# echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# mkdir /sys/kernel/debug/tracing/instances/test1
# echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 2048
# cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
bytes_alloc > 2048
Setting the filter in tracing/instances/test1/events shouldn't affect
the same event in tracing/events as it does above.
After:
# echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# mkdir /sys/kernel/debug/tracing/instances/test1
# echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
bytes_alloc > 2048
We'd like to just move the filter directly from ftrace_event_call to
ftrace_event_file, but there are a couple cases that don't yet have
multibuffer support and therefore have to continue using the current
event_call-based filters. For those cases, a new USE_CALL_FILTER bit
is added to the event_call flags, whose main purpose is to keep the
old behavior for those cases until they can be updated with
multibuffer support; at that point, the USE_CALL_FILTER flag (and the
new associated call_filter_check_discard() function) can go away.
The multibuffer support also made filter_current_check_discard()
redundant, so this change removes that function as well and replaces
it with filter_check_discard() (or call_filter_check_discard() as
appropriate).
Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For string without format specifiers, use trace_seq_puts()
or trace_seq_putc().
Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.
The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.
This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.
The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Now that the pluging tracers use macros to create the structures and
automate the exporting of their formats to the format files, they also
automatically get a filter file.
This patch adds the code to implement the filter logic in the trace
recordings.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers (irqsoff and wakeup) can swap trace buffers
on the fly. If an event is happening and has reserved data on one of
the buffers, and the latency tracer swaps the global buffer with the
max buffer, the result is that the event may commit the data to the
wrong buffer.
This patch changes the API to the trace recording to be recieve the
buffer that was used to reserve a commit. Then this buffer can be passed
in to the commit.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: cleanup
Use USEC_PER_SEC and NSEC_PER_SEC instead of 1000000 and 1000000000.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <49CC7870.9000309@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function depth in trace_printk was to facilitate the function
graph output. Now that the function graph calculates the depth within
the trace output, we no longer need to record the depth when the
trace_printk is called.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix callsites with dynamic format strings
Since its new binary implementation, trace_printk() internally uses static
containers for the format strings on each callsites. But the value is
assigned once at build time, which means that it can't take dynamic
formats.
So this patch unearthes the raw trace_printk implementation for the callers
that will need trace_printk to be able to carry these dynamic format
strings. The trace_printk() macro will use the appropriate implementation
for each callsite. Most of the time however, the binary implementation will
still be used.
The other impact of this patch is that mmiotrace_printk() will use the old
implementation because it calls the low level trace_vprintk and we can't
guess here whether the format passed in it is dynamic or not.
Some parts of this patch have been written by Steven Rostedt (most notably
the part that chooses the appropriate implementation for each callsites).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: faster and lighter tracing
Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.
Some changes result of this:
- Previously, trace_bprintk depended of a single tracer and couldn't
work without. This tracer has been dropped and the whole implementation
of trace_printk() (like the module formats management) is now integrated
in the tracing core (comes with CONFIG_TRACING), though we keep the file
trace_printk (previously trace_bprintk.c) where we can find the module
management. Thus we don't overflow trace.c
- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.
- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
constants, and fix 'const' qualifiers warnings. But this is all transparent for
developers.
- etc...
V2:
- Rebase against last changes
- Fix mispell on the changelog
V3:
- Rebase against last changes (moving trace_printk() to kernel.h)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new API
These new functions do what previously was being open coded, reducing
the number of details ftrace plugin writers have to worry about.
It also standardizes the handling of stacktrace, userstacktrace and
other trace options we may introduce in the future.
With this patch, for instance, the blk tracer (and some others already
in the tree) can use the "userstacktrace" /d/tracing/trace_options
facility.
$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
trace_vprintk | -5
trace_graph_return | -22
trace_graph_entry | -26
trace_function | -45
__ftrace_trace_stack | -27
ftrace_trace_userstack | -29
tracing_sched_switch_trace | -66
tracing_stop | +1
trace_seq_to_user | -1
ftrace_trace_special | -63
ftrace_special | +1
tracing_sched_wakeup_trace | -70
tracing_reset_online_cpus | -1
13 functions changed, 2 bytes added, 355 bytes removed, diff: -353
linux-2.6-tip/block/blktrace.c:
__blk_add_trace | -58
1 function changed, 58 bytes removed, diff: -58
linux-2.6-tip/kernel/trace/trace.c:
trace_buffer_lock_reserve | +88
trace_buffer_unlock_commit | +86
2 functions changed, 174 bytes added, diff: +174
/tmp/vmlinux.after:
16 functions changed, 176 bytes added, 413 bytes removed, diff: -237
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After adding the printf format checking for trace_seq_printf, several
warnings now show up. This patch cleans them up.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: enhances lost events counting in mmiotrace
The tracing framework, or the ring buffer facility it uses, has a switch
to stop recording data. When recording is off, the trace events will be
lost. The framework does not count these, so mmiotrace has to count them
itself.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: simplify/generalize/refactor trace.c
The trace.c file is becoming more difficult to maintain due to the
growing number of events. There is several formats that an event may
be printed. This patch sets up the infrastructure of an event hash to
allow for events to register how they should be printed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, remove obsolete code
Now that the ring buffer used by ftrace allows for variable length
entries, we do not need the 'cont' feature of the buffer. This code
makes other parts of ftrace more complex and by removing this it
simplifies the ftrace code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch factors out common code from multiple tracers into a
tracing_reset_online_cpus() function and converts the tracers to use it.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle the TRACE_PRINT entries from the function grapg tracer
and output them as a C comment just below the function that called
it, as if it was a comment inside this function.
Example with an ftrace_printk inside might_sleep() function:
void __might_sleep(char *file, int line)
{
static unsigned long prev_jiffy; /* ratelimiting */
ftrace_printk("Hi I'm a comment in might_sleep() :-)");
A chunk of a resulting trace:
0) | _reiserfs_free_block() {
0) | reiserfs_read_bitmap_block() {
0) | __bread() {
0) | __getblk() {
0) | __find_get_block() {
0) 0.698 us | mark_page_accessed();
0) 2.267 us | }
0) | __might_sleep() {
0) | /* Hi I'm a comment in might_sleep() :-) */
0) 1.321 us | }
0) 5.872 us | }
0) 7.313 us | }
0) 8.718 us | }
And this patch brings two minor fixes:
- The newline after a switch-out task has disappeared
- The "|" sign just before the cpu number on task-switch has been deleted.
0) 0.616 us | pick_next_task_rt();
0) 1.457 us | _spin_trylock();
0) 0.653 us | _spin_unlock();
0) 0.728 us | _spin_trylock();
0) 0.631 us | _spin_unlock();
0) 0.729 us | native_load_sp0();
0) 0.593 us | native_load_tls();
------------------------------------------
0) cat-2834 => migrati-3
------------------------------------------
0) | finish_task_switch() {
0) 0.841 us | _spin_unlock_irq();
0) 0.616 us | post_schedule_rt();
0) 3.882 us | }
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix mmiotrace overrun tracing
When ftrace framework moved to use the ring buffer facility, the buffer
overrun detection was broken after 2.6.27 by commit
| commit 3928a8a2d9
| Author: Steven Rostedt <rostedt@goodmis.org>
| Date: Mon Sep 29 23:02:41 2008 -0400
|
| ftrace: make work with new ring buffer
|
| This patch ports ftrace over to the new ring buffer.
The detection is now fixed by using the ring buffer API.
When mmiotrace detects a buffer overrun, it will report the number of
lost events. People reading an mmiotrace log must know if something was
missed, otherwise the data may not make sense.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend the ->init() method with the ability to fail
This bring a way to know if the initialization of a tracer successed.
A tracer must return 0 on success and a traditional error (ie:
-ENOMEM) if it fails.
If a tracer fails to init, it is free to print a detailed warn. The
tracing api will not and switch to a new tracer will just return the
error from the init callback.
Note: this will be used for the return tracer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove obsolete variable in trace_array structure
With the new start / stop method of ftrace, the ctrl variable
in the trace_array structure is now obsolete. Remove it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Remove the ctrl_update tracer method
With the new quick start/stop method of tracing, the ctrl_update
method is out of date.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the new ring buffer infrastructure in ftrace, I'm trying to make
ftrace a little more light weight.
This patch converts a lot of the local_irq_save/restore into
preempt_disable/enable. The original preempt count in a lot of cases
has to be sent in as a parameter so that it can be recorded correctly.
Some places were recording it incorrectly before anyway.
This is also laying the ground work to make ftrace a little bit
more reentrant, and remove all locking. The function tracers must
still protect from reentrancy.
Note: All the function tracers must be careful when using preempt_disable.
It must do the following:
resched = need_resched();
preempt_disable_notrace();
[...]
if (resched)
preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
The reason is that if this function traces schedule() itself, the
preempt_enable_notrace() will cause a schedule, which will lead
us into a recursive failure.
If we needed to reschedule before calling preempt_disable, we
should have already scheduled. Since we did not, this is most
likely that we should not and are probably inside a schedule
function.
If resched was not set, we still need to catch the need resched
flag being set when preemption was off and the if case at the
end will catch that for us.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The mmiotrace map had a bug that would typecast the entry from
the trace to the wrong type. That is a known danger of C typecasts,
there's absolutely zero checking done on them.
Help that problem a bit by using a GCC extension to implement a
type filter that restricts the types that a trace record can be
cast into, and by adding a dynamic check (in debug mode) to verify
the type of the entry.
This patch adds a macro to assign all entries of ftrace using the type
of the variable and checking the entry id. The typecasts are now done
in the macro for only those types that it knows about, which should
be all the types that are allowed to be read from the tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adapt mmiotrace to the new print_line type.
By default, it ignores (and consumes) types it doesn't support.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the underlining ring buffer for ftrace now hold variable length
entries, we can take advantage of this by only storing the size of the
actual event into the buffer. This happens to increase the number of
entries in the buffer dramatically.
We can also get rid of the "trace_cont" operation, but I'm keeping that
until we have no more users. Some of the ftrace tracers can now change
their code to adapt to this new feature.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Also make trace_seq_print_cont() non-static, and add a newline if the
seq buffer can't hold all data.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Offer mmiotrace users a function to inject markers from inside the kernel.
This depends on the trace_vprintk() patch.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Moves the mmiotrace specific functions from trace.c to
trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(),
and tracing_generic_entry_update() are therefore made available outside
trace.c.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some tracers will need to work with more than one entry. In order to do this
the trace_entry structure was split into two fields. One for the start of
all entries, and one to continue an existing entry.
The trace_entry structure now has a "field" entry that consists of the previous
content of the trace_entry, and a "cont" entry that is just a string buffer
the size of the "field" entry.
Thanks to Andrew Morton for suggesting this idea.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Non-zero pid indicates the MMIO access originated in user space.
We do not catch that kind of accesses yet, so always print zero for now.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
