Commit fdacd57c79 ("netfilter: x_tables: never register tables by
default") introduces the function xt_register_template(), and in one case,
a call to that function was missing the error-case handling.
Handle when xt_register_template() returns an error value.
This was identified with the clang-analyzer's Dead-Store analysis.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For historical reasons x_tables still register tables by default in the
initial namespace.
Only newly created net namespaces add the hook on demand.
This means that the init_net always pays hook cost, even if no filtering
rules are added (e.g. only used inside a single netns).
Note that the hooks are added even when 'iptables -L' is called.
This is because there is no way to tell 'iptables -A' and 'iptables -L'
apart at kernel level.
The only solution would be to register the table, but delay hook
registration until the first rule gets added (or policy gets changed).
That however means that counters are not hooked either, so 'iptables -L'
would always show 0-counters even when traffic is flowing which might be
unexpected.
This keeps table and hook registration consistent with what is already done
in non-init netns: first iptables(-save) invocation registers both table
and hooks.
This applies the same solution adopted for ebtables.
All tables register a template that contains the l3 family, the name
and a constructor function that is called when the initial table has to
be added.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not register the arp mangling hooks from pernet init path.
As-is, load of the module is enough for these hooks to become active
in each net namespace.
Use checkentry instead so hook is only added if a CLUSTERIP rule is used.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This allows to change storage placement later on without changing readers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Like with iptables and ebtables, hook unregistration has to use the
pernet ops struct, not the template.
This triggered following splat:
hook not found, pf 3 num 0
WARNING: CPU: 0 PID: 224 at net/netfilter/core.c:480 __nf_unregister_net_hook+0x1eb/0x610 net/netfilter/core.c:480
[..]
nf_unregister_net_hook net/netfilter/core.c:502 [inline]
nf_unregister_net_hooks+0x117/0x160 net/netfilter/core.c:576
arpt_unregister_table_pre_exit+0x67/0x80 net/ipv4/netfilter/arp_tables.c:1565
Fixes: f9006acc8d ("netfilter: arp_tables: pass table pointer via nf_hook_ops")
Reported-by: syzbot+dcccba8a1e41a38cb9df@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The compat layer needs to parse untrusted input (the ruleset)
to translate it to a 64bit compatible format.
We had a number of bugs in this department in the past, so allow users
to turn this feature off.
Add CONFIG_NETFILTER_XTABLES_COMPAT kconfig knob and make it default to y
to keep existing behaviour.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same change as previous patch. Only difference:
no need to handle NULL template_ops parameter, the only caller
(arptable_filter) always passes non-NULL argument.
This removes all remaining accesses to net->ipv4.arptable_filter.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
iptable_x modules rely on 'struct net' to contain a pointer to the
table that should be evaluated.
In order to remove these pointers from struct net, pass them via
the 'priv' pointer in a similar fashion as nf_tables passes the
rule data.
To do that, duplicate the nf_hook_info array passed in from the
iptable_x modules, update the ops->priv pointers of the copy to
refer to the table and then change the hookfn implementations to
just pass the 'priv' argument to the traverser.
After this patch, the xt_table pointers can already be removed
from struct net.
However, changes to struct net result in re-compile of the entire
network stack, so do the removal after arptables and ip6tables
have been converted as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This changes how ip(6)table nat passes the ruleset/table to the
evaluation loop.
At the moment, it will fetch the table from struct net.
This change stores the table in the hook_ops 'priv' argument
instead.
This requires to duplicate the hook_ops for each netns, so
they can store the (per-net) xt_table structure.
The dupliated nat hook_ops get stored in net_generic data area.
They are free'd in the namespace exit path.
This is a pre-requisite to remove the xt_table/ruleset pointers
from struct net.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need for these.
There is only one caller, the xtables core, when the table is registered
for the first time with a particular network namespace.
After ->table_init() call, the table is linked into the tables[af] list,
so next call to that function will skip the ->table_init().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
xtables stores the xt_table structs in the struct net. This isn't
needed anymore, the structures could be passed via the netfilter hook
'private' pointer to the hook functions, which would allow us to remove
those pointers from struct net.
As a first step, reduce the number of accesses to the
net->ipv4.ip6table_{raw,filter,...} pointers.
This allows the tables to get unregistered by name instead of having to
pass the raw address.
The xt_table structure cane looked up by name+address family instead.
This patch is useless as-is (the backends still have the raw pointer
address), but it lowers the bar to remove those.
It also allows to put the 'was table registered in the first place' check
into ip_tables.c rather than have it in each table sub module.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its the same function as ipt_unregister_table_exit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When I changed defrag hooks to no longer get registered by default I
intentionally made it so that registration can only be un-done by unloading
the nf_defrag_ipv4/6 module.
In hindsight this was too conservative; there is no reason to keep defrag
on while there is no feature dependency anymore.
Moreover, this won't work if user isn't allowed to remove nf_defrag module.
This adds the disable() functions for both ipv4 and ipv6 and calls them
from conntrack, TPROXY and the xtables socket module.
ipvs isn't converted here, it will behave as before this patch and
will need module removal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xt_compat_match/target_from_user doesn't check that zeroing the area
to start of next rule won't write past end of allocated ruleset blob.
Remove this code and zero the entire blob beforehand.
Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com
Reported-by: Andy Nguyen <theflow@google.com>
Fixes: 9fa492cdc1 ("[NETFILTER]: x_tables: simplify compat API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.
Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.
The per-net hook unregister function uses call_rcu instead.
Fixes: b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This allows followup patch to remove the defrag_ipv4 member from struct
net. It also allows to auto-remove the hooks later on by adding a
_disable() function. This will be done later in a follow patch series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
similar to previous change: nf_log_syslog now covers ARP logging
as well, the old nf_log_arp module is removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Netfilter has multiple log modules:
nf_log_arp
nf_log_bridge
nf_log_ipv4
nf_log_ipv6
nf_log_netdev
nfnetlink_log
nf_log_common
With the exception of nfnetlink_log (packet is sent to userspace for
dissection/logging), all of them log to the kernel ringbuffer.
This is the first part of a series to merge all modules except
nfnetlink_log into a single module: nf_log_syslog.
This allows to reduce code. After the series, only two log modules remain:
nfnetlink_log and nf_log_syslog. The latter provides the same
functionality as the old per-af log modules.
This renames nf_log_ipv4 to nf_log_syslog.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commit cc00bcaa58.
This (and the preceding) patch basically re-implemented the RCU
mechanisms of patch 784544739a. That patch was replaced because of the
performance problems that it created when replacing tables. Now, we have
the same issue: the call to synchronize_rcu() makes replacing tables
slower by as much as an order of magnitude.
Prior to using RCU a script calling "iptables" approx. 200 times was
taking 1.16s. With RCU this increased to 11.59s.
Revert these patches and fix the issue in a different way.
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commit 443d6e86f8.
This (and the following) patch basically re-implemented the RCU
mechanisms of patch 784544739a. That patch was replaced because of the
performance problems that it created when replacing tables. Now, we have
the same issue: the call to synchronize_rcu() makes replacing tables
slower by as much as an order of magnitude.
Revert these patches and fix the issue in a different way.
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This new function combines the netlink register attribute parser
and the load validation function.
This update requires to replace:
enum nft_registers sreg:8;
in many of the expression private areas otherwise compiler complains
with:
error: cannot take address of bit-field ‘sreg’
when passing the register field as reference.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.
Reproducer:
Create two netns, connected with a veth:
$ ip netns add ns0
$ ip netns add ns1
$ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
$ ip -netns ns0 link set dev veth01 up
$ ip -netns ns1 link set dev veth10 up
$ ip -netns ns0 address add 192.0.2.10/32 dev veth01
$ ip -netns ns1 address add 192.0.2.11/32 dev veth10
Add a route to ns1 in ns0:
$ ip -netns ns0 route add 192.0.2.11/32 dev veth01
In ns1, only packets with TOS 4 can be routed to ns0:
$ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10
Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
is 4:
$ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1)
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0)
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE
... 0% packet loss ...
Now use iptable's rpfilter module in ns1:
$ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP
Not-ECT and ECT(1) packets still pass:
$ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1)
... 0% packet loss ...
But ECT(0) and ECN packets are dropped:
$ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0)
... 100% packet loss ...
$ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE
... 100% packet loss ...
After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.
Fixes: 8f97339d3f ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes the dereference to fetch the RCU pointer when holding
the appropriate xtables lock.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: cc00bcaa58 ("netfilter: x_tables: Switch synchronization to RCU")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Missing dependencies in NFT_BRIDGE_REJECT, from Randy Dunlap.
2) Use atomic_inc_return() instead of atomic_add_return() in IPVS,
from Yejune Deng.
3) Simplify check for overquota in xt_nfacct, from Kaixu Xia.
4) Move nfnl_acct_list away from struct net, from Miao Wang.
5) Pass actual sk in reject actions, from Jan Engelhardt.
6) Add timeout and protoinfo to ctnetlink destroy events,
from Florian Westphal.
7) Four patches to generalize set infrastructure to support
for multiple expressions per set element.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
netfilter: nftables: netlink support for several set element expressions
netfilter: nftables: generalize set extension to support for several expressions
netfilter: nftables: move nft_expr before nft_set
netfilter: nftables: generalize set expressions support
netfilter: ctnetlink: add timeout and protoinfo to destroy events
netfilter: use actual socket sk for REJECT action
netfilter: nfnl_acct: remove data from struct net
netfilter: Remove unnecessary conversion to bool
ipvs: replace atomic_add_return()
netfilter: nft_reject_bridge: fix build errors due to code movement
====================
Link: https://lore.kernel.org/r/20201212230513.3465-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running concurrent iptables rules replacement with data, the per CPU
sequence count is checked after the assignment of the new information.
The sequence count is used to synchronize with the packet path without the
use of any explicit locking. If there are any packets in the packet path using
the table information, the sequence count is incremented to an odd value and
is incremented to an even after the packet process completion.
The new table value assignment is followed by a write memory barrier so every
CPU should see the latest value. If the packet path has started with the old
table information, the sequence counter will be odd and the iptables
replacement will wait till the sequence count is even prior to freeing the
old table info.
However, this assumes that the new table information assignment and the memory
barrier is actually executed prior to the counter check in the replacement
thread. If CPU decides to execute the assignment later as there is no user of
the table information prior to the sequence check, the packet path in another
CPU may use the old table information. The replacement thread would then free
the table information under it leading to a use after free in the packet
processing context-
Unable to handle kernel NULL pointer dereference at virtual
address 000000000000008e
pc : ip6t_do_table+0x5d0/0x89c
lr : ip6t_do_table+0x5b8/0x89c
ip6t_do_table+0x5d0/0x89c
ip6table_filter_hook+0x24/0x30
nf_hook_slow+0x84/0x120
ip6_input+0x74/0xe0
ip6_rcv_finish+0x7c/0x128
ipv6_rcv+0xac/0xe4
__netif_receive_skb+0x84/0x17c
process_backlog+0x15c/0x1b8
napi_poll+0x88/0x284
net_rx_action+0xbc/0x23c
__do_softirq+0x20c/0x48c
This could be fixed by forcing instruction order after the new table
information assignment or by switching to RCU for the synchronization.
Fixes: 80055dab5d ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore")
Reported-by: Sean Tranchetti <stranche@codeaurora.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
True to the message of commit v5.10-rc1-105-g46d6c5ae953c, _do_
actually make use of state->sk when possible, such as in the REJECT
modules.
Reported-by: Minqiang Chen <ptpt52@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Enhance validation to support for reject from inet ingress chains.
Note that, reject from inet ingress and netdev ingress differ.
Reject packets from inet ingress are sent through ip_local_out() since
inet reject emulates the IP layer receive path. So the reject packet
follows to classic IP output and postrouting paths.
The reject action from netdev ingress assumes the packet not yet entered
the IP layer, so the reject packet is sent through dev_queue_xmit().
Therefore, reject packets from netdev ingress do not follow the classic
IP output and postrouting paths.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Adds reject skbuff creation helper functions to ipv4/6 nf_reject
infrastructure. Use these functions for reject verdict in bridge
family.
Can be reused by all different families that support reject and
will not inject the reject packet through ip local out.
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If netfilter changes the packet mark when mangling, the packet is
rerouted using the route_me_harder set of functions. Prior to this
commit, there's one big difference between route_me_harder and the
ordinary initial routing functions, described in the comment above
__ip_queue_xmit():
/* Note: skb->sk can be different from sk, in case of tunnels */
int __ip_queue_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
That function goes on to correctly make use of sk->sk_bound_dev_if,
rather than skb->sk->sk_bound_dev_if. And indeed the comment is true: a
tunnel will receive a packet in ndo_start_xmit with an initial skb->sk.
It will make some transformations to that packet, and then it will send
the encapsulated packet out of a *new* socket. That new socket will
basically always have a different sk_bound_dev_if (otherwise there'd be
a routing loop). So for the purposes of routing the encapsulated packet,
the routing information as it pertains to the socket should come from
that socket's sk, rather than the packet's original skb->sk. For that
reason __ip_queue_xmit() and related functions all do the right thing.
One might argue that all tunnels should just call skb_orphan(skb) before
transmitting the encapsulated packet into the new socket. But tunnels do
*not* do this -- and this is wisely avoided in skb_scrub_packet() too --
because features like TSQ rely on skb->destructor() being called when
that buffer space is truely available again. Calling skb_orphan(skb) too
early would result in buffers filling up unnecessarily and accounting
info being all wrong. Instead, additional routing must take into account
the new sk, just as __ip_queue_xmit() notes.
So, this commit addresses the problem by fishing the correct sk out of
state->sk -- it's already set properly in the call to nf_hook() in
__ip_local_out(), which receives the sk as part of its normal
functionality. So we make sure to plumb state->sk through the various
route_me_harder functions, and then make correct use of it following the
example of __ip_queue_xmit().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Dump vlan tag and proto for the usual vlan offload case if the
NF_LOG_MACDECODE flag is set on. Without this information the logging is
misleading as there is no reference to the VLAN header.
[12716.993704] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0800 SRC=192.168.10.2 DST=172.217.168.163 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2548 DF PROTO=TCP SPT=55848 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0
[12721.157643] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0806 ARP HTYPE=1 PTYPE=0x0800 OPCODE=2 MACSRC=86:6c:92:ea:d6:73 IPSRC=192.168.10.2 MACDST=0e:3b:eb:86:73:76 IPDST=192.168.10.1
Fixes: 83e96d443b ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Drop duplicated words in net/netfilter/ and net/ipv4/netfilter/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
sockptr_advance never properly worked. Replace it with _offset variants
of copy_from_sockptr and copy_to_sockptr.
Fixes: ba423fdaa5 ("net: add a new sockptr_t type")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was accidentally removed in an unrelated commit.
Fixes: c2f12630c6 ("netfilter: switch nf_setsockopt to sockptr_t")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lift the in_compat_syscall() from the callers instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the native and compat {get,set}sockopt handlers using
in_compat_syscall().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the native and compat {get,set}sockopt handlers using
in_compat_syscall().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Support for rejecting packets from the prerouting chain, from
Laura Garcia Liebana.
2) Remove useless assignment in pipapo, from Stefano Brivio.
3) On demand hook registration in IPVS, from Julian Anastasov.
4) Expire IPVS connection from process context to not overload
timers, also from Julian.
5) Fallback to conntrack TCP tracker to handle connection reuse
in IPVS, from Julian Anastasov.
6) Several patches to support for chain bindings.
7) Expose enum nft_chain_flags through UAPI.
8) Reject unsupported chain flags from the netlink control plane.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
REJECT statement can be only used in INPUT, FORWARD and OUTPUT
chains. This patch adds support of REJECT, both icmp and tcp
reset, at PREROUTING stage.
The need for this patch comes from the requirement of some
forwarding devices to reject traffic before the natting and
routing decisions.
The main use case is to be able to send a graceful termination
to legitimate clients that, under any circumstances, the NATed
endpoints are not available. This option allows clients to
decide either to perform a reconnection or manage the error in
their side, instead of just dropping the connection and let
them die due to timeout.
It is supported ipv4, ipv6 and inet families for nft
infrastructure.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Using new helpers ipt_unregister_table_pre_exit() and
ipt_unregister_table_exit().
Fixes: b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The pre_exit will un-register the underlying hook and .exit will do the
table freeing. The netns core does an unconditional synchronize_rcu after
the pre_exit hooks insuring no packets are in flight that have picked up
the pointer before completing the un-register.
Fixes: b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
