After system entered Suspend to RAM, registers setting of this
hardware is reset because the SoC will be turned off. On R-Car Gen3
(info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So,
after system resumed, it lacks of the initial settings for ptp. So,
add ravb_ptp_{init,stop}() into ravb_{resume,suspend}().
Fixes: f5d7837f96 ("ravb: ptp: Add CONFIG mode support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a286ba7387 ("ice: reorder PF/representor devlink
port register/unregister flows") moved the code to create
and destroy the devlink PF port. This was fine, but created
a corner case issue in the case of ice_register_netdev()
failing. In that case, the driver would end up calling
ice_devlink_destroy_pf_port() twice.
Additionally, it makes no sense to tie creation of the devlink
PF port to the creation of the netdev so separate out the
code to create/destroy the devlink PF port from the netdev
code. This makes it a cleaner interface.
Fixes: a286ba7387 ("ice: reorder PF/representor devlink port register/unregister flows")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-20 (iavf)
This series contains updates to iavf driver only.
Michal Schmidt converts single iavf workqueue to per adapter to avoid
deadlock issues.
Marcin moves setting of VLAN related netdev features to watchdog task to
avoid RTNL deadlock.
Stefan Assmann schedules immediate watchdog task execution on changing
primary MAC to avoid excessive delay.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: schedule watchdog immediately when changing primary MAC
iavf: Move netdev_update_features() into watchdog task
iavf: fix temporary deadlock and failure to set MAC address
====================
Link: https://lore.kernel.org/r/20230120211036.430946-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver marked broadcast/multicast frames as offloaded incorrectly.
Mark them as offloaded only when HW offloading has been enabled.
This should happen only for ADIN2111 when both ports are bridged
by the software.
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230120090846.18172-1-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If one of ports in the ethernet-ports was disabled, this driver
failed to probe all ports. So, fix it.
Fixes: 3590918b5d ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230120001959.1059850-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PCI and queue number info is missing in IRQ names.
Add PCI and queue number to IRQ names, to allow CPU affinity
tuning scripts to work.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/1674161950-19708-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iavf_replace_primary_mac() utilizes queue_work() to schedule the
watchdog task but that only ensures that the watchdog task is queued
to run. To make sure the watchdog is executed asap use
mod_delayed_work().
Without this patch it may take up to 2s until the watchdog task gets
executed, which may cause long delays when setting the MAC address.
Fixes: a3e839d539 ("iavf: Add usage of new virtchnl format to set default MAC")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove netdev_update_features() from iavf_adminq_task(), as it can cause
deadlocks due to needing rtnl_lock. Instead use the
IAVF_FLAG_SETUP_NETDEV_FEATURES flag to indicate that netdev features need
to be updated in the watchdog task. iavf_set_vlan_offload_features()
and iavf_set_queue_vlan_tag_loc() can be called directly from
iavf_virtchnl_completion().
Suggested-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We are seeing an issue where setting the MAC address on iavf fails with
EAGAIN after the 2.5s timeout expires in iavf_set_mac().
There is the following deadlock scenario:
iavf_set_mac(), holding rtnl_lock, waits on:
iavf_watchdog_task (within iavf_wq) to send a message to the PF,
and
iavf_adminq_task (within iavf_wq) to receive a response from the PF.
In this adapter state (>=__IAVF_DOWN), these tasks do not need to take
rtnl_lock, but iavf_wq is a global single-threaded workqueue, so they
may get stuck waiting for another adapter's iavf_watchdog_task to run
iavf_init_config_adapter(), which does take rtnl_lock.
The deadlock resolves itself by the timeout in iavf_set_mac(),
which results in EAGAIN returned to userspace.
Let's break the deadlock loop by changing iavf_wq into a per-adapter
workqueue, so that one adapter's tasks are not blocked by another's.
Fixes: 35a2443d09 ("iavf: Add waiting for response from PF in set mac")
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit b4fbf0b27f, reversing
changes made to 6c977c5c2e.
This seems like net-next material.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/
Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes: eb51365846 ("bnxt_en: Add basic ethtool -t selftest support.")
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the original implementation of dwmac5
commit 8bf993a587 ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdf ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
[ 7.933303] Call trace:
[ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[ 7.941455] __stmmac_open+0x16c/0x474 [stmmac]
[ 7.946117] stmmac_open+0x38/0x70 [stmmac]
[ 7.950414] __dev_open+0x100/0x1dc
[ 7.954006] __dev_change_flags+0x18c/0x204
[ 7.958297] dev_change_flags+0x24/0x6c
[ 7.962237] do_setlink+0x2b8/0xfa4
[ 7.965827] __rtnl_newlink+0x4ec/0x840
[ 7.969766] rtnl_newlink+0x50/0x80
[ 7.973353] rtnetlink_rcv_msg+0x12c/0x374
[ 7.977557] netlink_rcv_skb+0x5c/0x130
[ 7.981500] rtnetlink_rcv+0x18/0x2c
[ 7.985172] netlink_unicast+0x2e8/0x340
[ 7.989197] netlink_sendmsg+0x1a8/0x420
[ 7.993222] ____sys_sendmsg+0x218/0x280
[ 7.997249] ___sys_sendmsg+0xac/0x100
[ 8.001103] __sys_sendmsg+0x84/0xe0
[ 8.004776] __arm64_sys_sendmsg+0x24/0x30
[ 8.008983] invoke_syscall+0x48/0x114
[ 8.012840] el0_svc_common.constprop.0+0xcc/0xec
[ 8.017665] do_el0_svc+0x38/0xb0
[ 8.021071] el0_svc+0x2c/0x84
[ 8.024212] el0t_64_sync_handler+0xf4/0x120
[ 8.028598] el0t_64_sync+0x190/0x194
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 5ac712dcdf ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmPHp2QACgkQSD+KveBX
+j6M/QgAoyMrhYAKC8xiD/yYMvzpQUbl1iMZpK+YhTMMbYCnnsNZSNHLpq2CRu/B
hqNCBvMOgZD37413UcyskpLuPSNUTQPQthKxui1R3BQyCMjvw3Qoso3ALGkxGh+M
OIak6FPx6Mh198FXGFFjK5kvmlrN4Z+A9vdIVP725M27JqhX4czOJDBVXBukV4+L
yxmRxVk926iMNUs4j4+iVlFbAssUEqQVbjg+eEZUkb60mgKLXK9lTE3+5ngybeZm
qjluUa7mukUMcR1fmR6jAiuHQSkn3xWHbS1ztTm14PTkpomn5JQ/mSqY6jxVfl1u
1AGNmx2k+Cca2z8/5MndhVafLOSe6g==
=tzWU
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net: mlx5: eliminate anonymous module_init & module_exit
net/mlx5: E-switch, Fix switchdev mode after devlink reload
net/mlx5e: Protect global IPsec ASO
net/mlx5e: Remove optimization which prevented update of ESN state
net/mlx5e: Set decap action based on attr for sample
net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT
net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT
net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk
net/mlx5e: Avoid false lock dependency warning on tc_ht even more
net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The commit 4af1b64f80 ("octeontx2-pf: Fix lmtst ID used in aura
free") uses the get/put_cpu() to protect the usage of percpu pointer
in ->aura_freeptr() callback, but it also unnecessarily disable the
preemption for the blockable memory allocation. The commit 87b93b678e
("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to
fix these sleep inside atomic warnings. But it only fix the one for
the non-rt kernel. For the rt kernel, we still get the similar warnings
like below.
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by swapper/0/1:
#0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30
#1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4
#2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac
Preemption disabled at:
[<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284
CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
dump_backtrace.part.0+0xe8/0xf4
show_stack+0x20/0x30
dump_stack_lvl+0x9c/0xd8
dump_stack+0x18/0x34
__might_resched+0x188/0x224
rt_spin_lock+0x64/0x110
alloc_iova_fast+0x1ac/0x2ac
iommu_dma_alloc_iova+0xd4/0x110
__iommu_dma_map+0x80/0x144
iommu_dma_map_page+0xe8/0x260
dma_map_page_attrs+0xb4/0xc0
__otx2_alloc_rbuf+0x90/0x150
otx2_rq_aura_pool_init+0x1c8/0x284
otx2_init_hw_resources+0xe4/0x3a4
otx2_open+0xf0/0x610
__dev_open+0x104/0x224
__dev_change_flags+0x1e4/0x274
dev_change_flags+0x2c/0x7c
ic_open_devs+0x124/0x2f8
ip_auto_config+0x180/0x42c
do_one_initcall+0x90/0x4dc
do_basic_setup+0x10c/0x14c
kernel_init_freeable+0x10c/0x13c
kernel_init+0x2c/0x140
ret_from_fork+0x10/0x20
Of course, we can shuffle the get/put_cpu() to only wrap the invocation
of ->aura_freeptr() as what commit 87b93b678e does. But there are only
two ->aura_freeptr() callbacks, otx2_aura_freeptr() and
cn10k_aura_freeptr(). There is no usage of perpcu variable in the
otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it.
We can move the get/put_cpu() into the corresponding callback which
really has the percpu variable usage and avoid the sprinkling of
get/put_cpu() in several places.
Fixes: 4af1b64f80 ("octeontx2-pf: Fix lmtst ID used in aura free")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20230118071300.3271125-1-haokexin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PTP TX timestamp handling was observed to be broken with this driver
when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving
the expected TX timestamp after transmitting a packet, causing it to
enter a failure state.
The problem appears to be due to the way that the driver pads packets
which are smaller than the Ethernet minimum of 60 bytes. If headroom
space was available in the SKB, this caused the driver to move the data
back to utilize it. However, this appears to cause other data references
in the SKB to become inconsistent. In particular, this caused the
ptp_one_step_sync function to later (in the TX completion path) falsely
detect the packet as a one-step SYNC packet, even when it was not, which
caused the TX timestamp to not be processed when it should be.
Using the headroom for this purpose seems like an unnecessary complexity
as this is not a hot path in the driver, and in most cases it appears
that there is sufficient tailroom to not require using the headroom
anyway. Remove this usage of headroom to prevent this inconsistency from
occurring and causing other problems.
Fixes: 653e92a917 ("net: macb: add support for padding and fcs computation")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit removes eswitch mode none. So after devlink reload
in switchdev mode, eswitch mode is not changed. But actually eswitch
is disabled during devlink reload.
Fix it by setting eswitch mode to legacy when disabling eswitch
which is called by reload_down.
Fixes: f019679ea5 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
ASO operations are global to whole IPsec as they share one DMA address
for all operations. As such all WQE operations need to be protected with
lock. In this case, it must be spinlock to allow mlx5e_ipsec_aso_query()
operate in atomic context.
Fixes: 1ed78fc033 ("net/mlx5e: Update IPsec soft and hard limits")
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
aso->use_cache variable introduced in commit 8c582ddfbb ("net/mlx5e: Handle
hardware IPsec limits events") was an optimization to skip recurrent calls
to mlx5e_ipsec_aso_query(). Such calls are possible when lifetime event is
generated:
-> mlx5e_ipsec_handle_event()
-> mlx5e_ipsec_aso_query() - first call
-> xfrm_state_check_expire()
-> mlx5e_xfrm_update_curlft()
-> mlx5e_ipsec_aso_query() - second call
However, such optimization not really effective as mlx5e_ipsec_aso_query()
is needed to be called for update ESN anyway, which was missed due to misplaced
use_cache assignment.
Fixes: cee137a634 ("net/mlx5e: Handle ESN update events")
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently decap action is set based on tunnel_id. That means it is
set unconditionally. But for decap, ct and sample actions, decap is
done before ct. No need to decap again in sample.
And the actions are set correctly when parsing. So set decap action
based on attr instead of tunnel_id.
Fixes: 2741f22309 ("net/mlx5e: TC, Support sample offload action for tunneled traffic")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
According to HW spec parent_element_id field should be reserved (0x0) when calling
MODIFY_SCHEDULING_ELEMENT command.
This patch remove the wrong initialization of reserved field, parent_element_id, on
mlx5_qos_update_node.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
According to HW spec element_type, element_attributes and parent_element_id fields
should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command.
This patch remove initialization of these fields when calling the command.
Fixes: bd77bf1cb5 ("net/mlx5: Add SRIOV VF max rate configuration support")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This validation function is relevant only for XSK cases, hence it
assumes to be called only with xsk != NULL.
Thus checking for invalid xsk pointer is redundant and misleads static
code analyzers.
This commit removes redundant xsk pointer check.
This solves the following smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en/params.c:481
mlx5e_mpwrq_validate_xsk() error: we previously assumed 'xsk' could be
null (see line 478)
Fixes: 6470d2e7e8 ("net/mlx5e: xsk: Use KSM for unaligned XSK")
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In a number of cases the driver assigns a default value of -1 to
priv->plat->phy_addr. This may result in calling mdiobus_get_phy()
with addr parameter being -1. Therefore check for this scenario and
bail out before calling mdiobus_get_phy().
Fixes: 42e87024f7 ("net: stmmac: Fix case when PHY handle is not present")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/669f9671-ecd1-a41b-2727-7b73e3003985@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Correct queue statistics reading. All queue statistics are stored as unsigned
long values. The retrieval for ethtool fetches these values as u64. However, on
some systems the size of the counters are 32 bit. That yields wrong queue
statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by
using the correct data type.
Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short
period of time:
Non-patched kernel:
|root@st1:~# ethtool -S eth0 | grep q0
| q0_tx_pkt_n: 3775276254951 # ???
| q0_tx_irq_n: 879
| q0_rx_pkt_n: 1194000908909 # ???
| q0_rx_irq_n: 278
Patched kernel:
|root@st1:~# ethtool -S eth0 | grep q0
| q0_tx_pkt_n: 2434
| q0_tx_irq_n: 1274
| q0_rx_pkt_n: 1604
| q0_rx_irq_n: 846
Fixes: 68e9c5dee1 ("net: stmmac: add ethtool per-queue statistic framework")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the "ethernet-ports" node is retrieved using
device_get_named_child_node(), it should be release after using it. Add
missing fwnode_handle_put() and move the code that retrieved the node
from device-tree to avoid complicated handling in case of error.
Fixes: db8bcaad53 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This lockdep splat says it better than I could:
================================
WARNING: inconsistent lock state
6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0
{IN-SOFTIRQ-W} state was registered at:
_raw_spin_lock+0x5c/0xc0
sch_direct_xmit+0x148/0x37c
__dev_queue_xmit+0x528/0x111c
ip6_finish_output2+0x5ec/0xb7c
ip6_finish_output+0x240/0x3f0
ip6_output+0x78/0x360
ndisc_send_skb+0x33c/0x85c
ndisc_send_rs+0x54/0x12c
addrconf_rs_timer+0x154/0x260
call_timer_fn+0xb8/0x3a0
__run_timers.part.0+0x214/0x26c
run_timer_softirq+0x3c/0x74
__do_softirq+0x14c/0x5d8
____do_softirq+0x10/0x20
call_on_irq_stack+0x2c/0x5c
do_softirq_own_stack+0x1c/0x30
__irq_exit_rcu+0x168/0x1a0
irq_exit_rcu+0x10/0x40
el1_interrupt+0x38/0x64
irq event stamp: 7825
hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130
hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8
softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8
softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(_xmit_ETHER#2);
<Interrupt>
lock(_xmit_ETHER#2);
*** DEADLOCK ***
3 locks held by kworker/1:3/179:
#0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
#1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
#2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34
Workqueue: events enetc_tx_onestep_tstamp
Call trace:
print_usage_bug.part.0+0x208/0x22c
mark_lock+0x7f0/0x8b0
__lock_acquire+0x7c4/0x1ce0
lock_acquire.part.0+0xe0/0x220
lock_acquire+0x68/0x84
_raw_spin_lock+0x5c/0xc0
netif_freeze_queues+0x5c/0xc0
netif_tx_lock+0x24/0x34
enetc_tx_onestep_tstamp+0x20/0x100
process_one_work+0x28c/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x11c
but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.
To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running.
Fixes: 7294380c52 ("enetc: support PTP Sync packet one-step timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AN restart triggered during KR training not only aborts the KR training
process but also move the HW to unstable state. Driver has to wait upto
500ms or until the KR training is completed before restarting AN cycle.
Fixes: 7c12aa0877 ("amd-xgbe: Move the PHY support into amd-xgbe")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is difference in the TX Flow Control registers (TFCR) between the
revisions of the hardware. The older revisions of hardware used to have
single register per queue. Whereas, the newer revision of hardware (from
ver 30H onwards) have one register per priority.
Update the driver to use the TFCR based on the reported version of the
hardware.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com>
Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit
(ATSFC) to clear. This is to ensure no residue fifo value is being read
erroneously.
Fixes: f4da56529d ("net: stmmac: Add support for external trigger timestamping")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-10 (ixgbe, igc, iavf)
This series contains updates to ixgbe, igc, and iavf drivers.
Yang Yingliang adds calls to pci_dev_put() for proper ref count tracking
on ixgbe.
Christopher adds setting of Toggle on Target Time bits for proper
pulse per second (PPS) synchronization for igc.
Daniil Tatianin fixes, likely, copy/paste issue that misreported
destination instead of source for IP mask for iavf error.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
====================
Link: https://lore.kernel.org/r/20230110223825.648544-1-anthony.l.nguyen@intel.com
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before the commit under Fixes the page would have been released
from the pool before the napi_alloc_skb() call, so normal page
freeing was fine (released page == no longer in the pool).
After the change we just mark the page for recycling so it's still
in the pool if the skb alloc fails, we need to recycle.
Same commit added the same bug in the new bnxt_rx_multi_page_skb().
Fixes: 1dc4c557bf ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, it used old rss size to get current tc mode. As a result, the
rss size is updated, but the tc mode is still configured based on the old
rss size.
So this patch fixes it by using the new rss size in both process.
Fixes: 93969dc14f ("net: hns3: refactor VF rss init APIs with new common rss init APIs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If ptp was not enabled due to missing IRQ for instance,
lan966x_ptp_deinit() will dereference NULL pointers.
Fixes: d096459494 ("net: lan966x: Add support for ptp clocks")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-09 (ice)
This series contains updates to ice driver only.
Jiasheng Jiang frees allocated cmd_buf if write_buf allocation failed to
prevent memory leak.
Yuan Can adds check, and proper cleanup, of gnss_tty_port allocation call
to avoid memory leaks.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Add check for kzalloc
ice: Fix potential memory leak in ice_gnss_tty_write()
====================
Link: https://lore.kernel.org/r/20230109225358.3478060-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes a copy-paste issue where dev_err would log the dst mask even
though it is clearly talking about src.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: 0075fa0fad ("i40evf: Add support to apply cloud filters")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch fix the pulse per second output delta between
two synchronized end-points.
Based on Intel Discrete I225 Software User Manual Section
4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and
ST1[Bit 7] must be set to ensure that clock output will be
toggles based on frequency value defined. This is to ensure
that output of the PPS is aligned with the clock.
How to test:
1) Running time synchronization on both end points.
Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name>
2) Configure PPS output using below command for both end-points
Ex: SDP0 on I225 REV4 SKU variant
./testptp -d /dev/ptp0 -L 0,2
./testptp -d /dev/ptp0 -p 1000000000
3) Measure the output using analyzer for both end-points
Fixes: 87938851b6 ("igc: enable auxiliary PHC functions for the i225")
Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As the comment of pci_get_domain_bus_and_slot() says, it
returns a PCI device with refcount incremented, when finish
using it, the caller must decrement the reference count by
calling pci_dev_put().
In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(),
pci_dev_put() is called to avoid leak.
Fixes: 8fa10ef012 ("ixgbe: register a mdiobus")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
