Commit graph

421 commits

Author SHA1 Message Date
Linus Torvalds
4403b406d4 Revert "Call init_workqueues before pre smp initcalls."
This reverts commit a802dd0eb5 by moving
the call to init_workqueues() back where it belongs - after SMP has been
initialized.

It also moves stop_machine_init() - which needs workqueues - to a later
phase using a core_initcall() instead of early_initcall().  That should
satisfy all ordering requirements, and was apparently the reason why
init_workqueues() was moved to be too early.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-25 19:53:38 -07:00
Linus Torvalds
5ed487bc2c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (46 commits)
  [PATCH] fs: add a sanity check in d_free
  [PATCH] i_version: remount support
  [patch] vfs: make security_inode_setattr() calling consistent
  [patch 1/3] FS_MBCACHE: don't needlessly make it built-in
  [PATCH] move executable checking into ->permission()
  [PATCH] fs/dcache.c: update comment of d_validate()
  [RFC PATCH] touch_mnt_namespace when the mount flags change
  [PATCH] reiserfs: add missing llseek method
  [PATCH] fix ->llseek for more directories
  [PATCH vfs-2.6 6/6] vfs: add LOOKUP_RENAME_TARGET intent
  [PATCH vfs-2.6 5/6] vfs: remove LOOKUP_PARENT from non LOOKUP_PARENT lookup
  [PATCH vfs-2.6 4/6] vfs: remove unnecessary fsnotify_d_instantiate()
  [PATCH vfs-2.6 3/6] vfs: add __d_instantiate() helper
  [PATCH vfs-2.6 2/6] vfs: add d_ancestor()
  [PATCH vfs-2.6 1/6] vfs: replace parent == dentry->d_parent by IS_ROOT()
  [PATCH] get rid of on-stack dentry in udf
  [PATCH 2/2] anondev: switch to IDA
  [PATCH 1/2] anondev: init IDR statically
  [JFFS2] Use d_splice_alias() not d_add() in jffs2_lookup()
  [PATCH] Optimise NFS readdir hack slightly.
  ...
2008-10-23 10:22:40 -07:00
Linus Torvalds
a3415dc34f Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (32 commits)
  PCI hotplug: fix logic in Compaq hotplug controller bus speed setup
  PCI: don't export linux/io.h from pci.h
  PCI: PCI_QUIRKS depends on PCI
  PCI hotplug: pciehp: poll data link layer link active
  PCI hotplug: pciehp: fix possible memory leak in pcie_init
  PCI: Workaround invalid P2P bridge bus numbers
  PCI Hotplug: fakephp: add duplicate slot name debugging
  PCI: Hotplug core: remove 'name'
  PCI: shcphp: remove 'name' parameter
  PCI: SGI Hotplug: stop managing bss_hotplug_slot->name
  PCI: rpaphp: kmalloc/kfree slot->name directly
  PCI: pciehp: remove 'name' parameter
  PCI: ibmphp: stop managing hotplug_slot->name
  PCI: fakephp: remove 'name' parameter
  PCI, PCI Hotplug: introduce slot_name helpers
  PCI: cpqphp: stop managing hotplug_slot->name
  PCI: cpci_hotplug: stop managing hotplug_slot->name
  PCI: acpiphp: remove 'name' parameter
  PCI: prevent duplicate slot names
  PCI Hotplug: serialize pci_hp_register and pci_hp_deregister
  ...
2008-10-23 10:16:53 -07:00
Linus Torvalds
a534487606 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  stop_machine: fix error code handling on multiple cpus
  stop_machine: use workqueues instead of kernel threads
  workqueue: introduce create_rt_workqueue
  Call init_workqueues before pre smp initcalls.
  Make panic= and panic_on_oops into core_params
  Make initcall_debug a core_param
  core_param() for genuinely core kernel parameters
  param: Fix duplicate module prefixes
  module: check kernel param length at compile time, not runtime
  Remove stop_machine during module load v2
  module: simplify load_module.
2008-10-23 10:00:14 -07:00
KAMEZAWA Hiroyuki
94b6da5ab8 memcg: fix page_cgroup allocation
page_cgroup_init() is called from mem_cgroup_init(). But at this
point, we cannot call alloc_bootmem().
(and this caused panic at boot.)

This patch moves page_cgroup_init() to init/main.c.

Time table is following:
==
  parse_args(). # we can trust mem_cgroup_subsys.disabled bit after this.
  ....
  cgroup_init_early()  # "early" init of cgroup.
  ....
  setup_arch()         # memmap is allocated.
  ...
  page_cgroup_init();
  mem_init();   # we cannot call alloc_bootmem after this.
  ....
  cgroup_init() # mem_cgroup is initialized.
==

Before page_cgroup_init(), mem_map must be initialized. So,
I added page_cgroup_init() to init/main.c directly.

(*) maybe this is not very clean but
    - cgroup_init_early() is too early
    - in cgroup_init(), we have to use vmalloc instead of alloc_bootmem().
    use of vmalloc area in x86-32 is important and we should avoid very large
    vmalloc() in x86-32. So, we want to use alloc_bootmem() and added page_cgroup_init()
    directly to init/main.c

[akpm@linux-foundation.org: remove unneeded/bad mem_cgroup_subsys declaration]
[akpm@linux-foundation.org: fix build]
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23 08:55:02 -07:00
Alexey Dobriyan
6de24f0ed0 [PATCH 1/2] anondev: init IDR statically
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23 05:13:13 -04:00
Geert Uytterhoeven
61cfc7e442 PCI: PCI_QUIRKS depends on PCI
commit 3d13731024 ("PCI: allow quirks to be
compiled out") introduced CONFIG_PCI_QUIRKS, which now shows up in each
and every .config.  Fix this by making it depend on PCI.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 16:42:46 -07:00
Heiko Carstens
a802dd0eb5 Call init_workqueues before pre smp initcalls.
This allows to create workqueues from within the context of
a pre smp initcall (aka early_initcall).

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-22 10:00:25 +11:00
Rusty Russell
d0ea3d7d28 Make initcall_debug a core_param
This is the one I really wanted: now it effects module loading, it
makes sense to be able to flip it after boot.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
2008-10-22 10:00:24 +11:00
Linus Torvalds
a0bfb673dc Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (41 commits)
  PCI: fix pci_ioremap_bar() on s390
  PCI: fix AER capability check
  PCI: use pci_find_ext_capability everywhere
  PCI: remove #ifdef DEBUG around dev_dbg call
  PCI hotplug: fix get_##name return value problem
  PCI: document the pcie_aspm kernel parameter
  PCI: introduce an pci_ioremap(pdev, barnr) function
  powerpc/PCI: Add legacy PCI access via sysfs
  PCI: Add ability to mmap legacy_io on some platforms
  PCI: probing debug message uniformization
  PCI: support PCIe ARI capability
  PCI: centralize the capabilities code in probe.c
  PCI: centralize the capabilities code in pci-sysfs.c
  PCI: fix 64-vbit prefetchable memory resource BARs
  PCI: replace cfg space size (256/4096) by macros.
  PCI: use resource_size() everywhere.
  PCI: use same arg names in PCI_VDEVICE comment
  PCI hotplug: rpaphp: make debug var unique
  PCI: use %pF instead of print_fn_descriptor_symbol() in quirks.c
  PCI: fix hotplug get_##name return value problem
  ...
2008-10-20 13:40:47 -07:00
Linus Torvalds
92b29b86fe Merge branch 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits)
  tracing/fastboot: improve help text
  tracing/stacktrace: improve help text
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix bootgraph.pl initcall name regexp
  tracing/fastboot: fix issues and improve output of bootgraph.pl
  tracepoints: synchronize unregister static inline
  tracepoints: tracepoint_synchronize_unregister()
  ftrace: make ftrace_test_p6nop disassembler-friendly
  markers: fix synchronize marker unregister static inline
  tracing/fastboot: add better resolution to initcall debug/tracing
  trace: add build-time check to avoid overrunning hex buffer
  ftrace: fix hex output mode of ftrace
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix printk format typo in boot tracer
  ftrace: return an error when setting a nonexistent tracer
  ftrace: make some tracers reentrant
  ring-buffer: make reentrant
  ring-buffer: move page indexes into page headers
  tracing/fastboot: only trace non-module initcalls
  ftrace: move pc counter in irqtrace
  ...

Manually fix conflicts:
 - init/main.c: initcall tracing
 - kernel/module.c: verbose level vs tracepoints
 - scripts/bootgraph.pl: fallout from cherry-picking commits.
2008-10-20 13:35:07 -07:00
Thomas Petazzoni
3d13731024 PCI: allow quirks to be compiled out
This patch adds the CONFIG_PCI_QUIRKS option which allows to remove all
the PCI quirks, which are not necessarily used on embedded systems when
PCI is working properly. As this is a size-reduction option, it depends
on CONFIG_EMBEDDED. It allows to save almost 12 kilobytes of kernel
code:

   text	   data	    bss	    dec	    hex	filename
1287806	 123596	 212992	1624394	 18c94a	vmlinux.old
1275854	 123596	 212992	1612442	 189a9a	vmlinux
 -11952       0       0  -11952   -2EB0 +/-

This patch has originally been written by Zwane Mwaikambo
<zwane@arm.linux.org.uk> and is part of the Linux Tiny project.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:53:40 -07:00
Matt Helsley
dc52ddc0e6 container freezer: implement freezer cgroup subsystem
This patch implements a new freezer subsystem in the control groups
framework.  It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.

The freezer subsystem in the container filesystem defines a file named
freezer.state.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.  Reading will return the current state.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This is the basic mechanism which should do the right thing for user space
task in a simple scenario.

It's important to note that freezing can be incomplete.  In that case we
return EBUSY.  This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time.  After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read.  The state will remain
"FREEZING" until one of these things happens:

	1) Userspace cancels the freezing operation by writing "RUNNING" to
		the freezer.state file
	2) Userspace retries the freezing operation by writing "FROZEN" to
		the freezer.state file (writing "FREEZING" is not legal
		and returns EIO)
	3) The tasks that blocked the cgroup from entering the "FROZEN"
		state disappear from the cgroup's set of tasks.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:34 -07:00
Nick Piggin
db64fe0225 mm: rewrite vmap layer
Rewrite the vmap allocator to use rbtrees and lazy tlb flushing, and
provide a fast, scalable percpu frontend for small vmaps (requires a
slightly different API, though).

The biggest problem with vmap is actually vunmap.  Presently this requires
a global kernel TLB flush, which on most architectures is a broadcast IPI
to all CPUs to flush the cache.  This is all done under a global lock.  As
the number of CPUs increases, so will the number of vunmaps a scaled
workload will want to perform, and so will the cost of a global TLB flush.
 This gives terrible quadratic scalability characteristics.

Another problem is that the entire vmap subsystem works under a single
lock.  It is a rwlock, but it is actually taken for write in all the fast
paths, and the read locking would likely never be run concurrently anyway,
so it's just pointless.

This is a rewrite of vmap subsystem to solve those problems.  The existing
vmalloc API is implemented on top of the rewritten subsystem.

The TLB flushing problem is solved by using lazy TLB unmapping.  vmap
addresses do not have to be flushed immediately when they are vunmapped,
because the kernel will not reuse them again (would be a use-after-free)
until they are reallocated.  So the addresses aren't allocated again until
a subsequent TLB flush.  A single TLB flush then can flush multiple
vunmaps from each CPU.

XEN and PAT and such do not like deferred TLB flushing because they can't
always handle multiple aliasing virtual addresses to a physical address.
They now call vm_unmap_aliases() in order to flush any deferred mappings.
That call is very expensive (well, actually not a lot more expensive than
a single vunmap under the old scheme), however it should be OK if not
called too often.

The virtual memory extent information is stored in an rbtree rather than a
linked list to improve the algorithmic scalability.

There is a per-CPU allocator for small vmaps, which amortizes or avoids
global locking.

To use the per-CPU interface, the vm_map_ram / vm_unmap_ram interfaces
must be used in place of vmap and vunmap.  Vmalloc does not use these
interfaces at the moment, so it will not be quite so scalable (although it
will use lazy TLB flushing).

As a quick test of performance, I ran a test that loops in the kernel,
linearly mapping then touching then unmapping 4 pages.  Different numbers
of tests were run in parallel on an 4 core, 2 socket opteron.  Results are
in nanoseconds per map+touch+unmap.

threads           vanilla         vmap rewrite
1                 14700           2900
2                 33600           3000
4                 49500           2800
8                 70631           2900

So with a 8 cores, the rewritten version is already 25x faster.

In a slightly more realistic test (although with an older and less
scalable version of the patch), I ripped the not-very-good vunmap batching
code out of XFS, and implemented the large buffer mapping with vm_map_ram
and vm_unmap_ram...  along with a couple of other tricks, I was able to
speed up a large directory workload by 20x on a 64 CPU system.  I believe
vmap/vunmap is actually sped up a lot more than 20x on such a system, but
I'm running into other locks now.  vmap is pretty well blown off the
profiles.

Before:
1352059 total                                      0.1401
798784 _write_lock                              8320.6667 <- vmlist_lock
529313 default_idle                             1181.5022
 15242 smp_call_function                         15.8771  <- vmap tlb flushing
  2472 __get_vm_area_node                         1.9312  <- vmap
  1762 remove_vm_area                             4.5885  <- vunmap
   316 map_vm_area                                0.2297  <- vmap
   312 kfree                                      0.1950
   300 _spin_lock                                 3.1250
   252 sn_send_IPI_phys                           0.4375  <- tlb flushing
   238 vmap                                       0.8264  <- vmap
   216 find_lock_page                             0.5192
   196 find_next_bit                              0.3603
   136 sn2_send_IPI                               0.2024
   130 pio_phys_write_mmr                         2.0312
   118 unmap_kernel_range                         0.1229

After:
 78406 total                                      0.0081
 40053 default_idle                              89.4040
 33576 ia64_spinlock_contention                 349.7500
  1650 _spin_lock                                17.1875
   319 __reg_op                                   0.5538
   281 _atomic_dec_and_lock                       1.0977
   153 mutex_unlock                               1.5938
   123 iget_locked                                0.1671
   117 xfs_dir_lookup                             0.1662
   117 dput                                       0.1406
   114 xfs_iget_core                              0.0268
    92 xfs_da_hashname                            0.1917
    75 d_alloc                                    0.0670
    68 vmap_page_range                            0.0462 <- vmap
    58 kmem_cache_alloc                           0.0604
    57 memset                                     0.0540
    52 rb_next                                    0.1625
    50 __copy_user                                0.0208
    49 bitmap_find_free_region                    0.2188 <- vmap
    46 ia64_sn_udelay                             0.1106
    45 find_inode_fast                            0.1406
    42 memcmp                                     0.2188
    42 finish_task_switch                         0.1094
    42 __d_lookup                                 0.0410
    40 radix_tree_lookup_slot                     0.1250
    37 _spin_unlock_irqrestore                    0.3854
    36 xfs_bmapi                                  0.0050
    36 kmem_cache_free                            0.0256
    35 xfs_vn_getattr                             0.0322
    34 radix_tree_lookup                          0.1062
    33 __link_path_walk                           0.0035
    31 xfs_da_do_buf                              0.0091
    30 _xfs_buf_find                              0.0204
    28 find_get_page                              0.0875
    27 xfs_iread                                  0.0241
    27 __strncpy_from_user                        0.2812
    26 _xfs_buf_initialize                        0.0406
    24 _xfs_buf_lookup_pages                      0.0179
    24 vunmap_page_range                          0.0250 <- vunmap
    23 find_lock_page                             0.0799
    22 vm_map_ram                                 0.0087 <- vmap
    20 kfree                                      0.0125
    19 put_page                                   0.0330
    18 __kmalloc                                  0.0176
    17 xfs_da_node_lookup_int                     0.0086
    17 _read_lock                                 0.0885
    17 page_waitqueue                             0.0664

vmap has gone from being the top 5 on the profiles and flushing the crap
out of all TLBs, to using less than 1% of kernel time.

[akpm@linux-foundation.org: cleanups, section fix]
[akpm@linux-foundation.org: fix build on alpha]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:32 -07:00
Adrian Bunk
73b4a24f5f init/do_mounts_md.c must #include <linux/delay.h>
This patch fixes the following compile error caused by commit
589f800bb1 ("fastboot: make the raid
autodetect code wait for all devices to init"):

    CC      init/do_mounts_md.o
  init/do_mounts_md.c: In function 'autodetect_raid':
  init/do_mounts_md.c:285: error: implicit declaration of function 'msleep'
  make[2]: *** [init/do_mounts_md.o] Error 1

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 13:35:34 -07:00
Thomas Petazzoni
ebf3f09c63 Configure out AIO support
This patchs adds the CONFIG_AIO option which allows to remove support
for asynchronous I/O operations, that are not necessarly used by
applications, particularly on embedded devices. As this is a
size-reduction option, it depends on CONFIG_EMBEDDED. It allows to
save ~7 kilobytes of kernel code/data:

   text	   data	    bss	    dec	    hex	filename
1115067	 119180	 217088	1451335	 162547	vmlinux
1108025	 119048	 217088	1444161	 160941	vmlinux.new
  -7042    -132       0   -7174   -1C06 +/-

This patch has been originally written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.

[randy.dunlap@oracle.com: build fix]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:51 -07:00
Nye Liu
889d51a107 initramfs: add option to preserve mtime from initramfs cpio images
When unpacking the cpio into the initramfs, mtimes are not preserved by
default.  This patch adds an INITRAMFS_PRESERVE_MTIME option that allows
mtimes stored in the cpio image to be used when constructing the
initramfs.

For embedded applications that run exclusively out of the initramfs, this
is invaluable:

When building embedded application initramfs images, its nice to know when
the files were actually created during the build process - that makes it
easier to see what files were modified when so we can compare the files
that are being used on the image with the files used during the build
process.  This might help (for example) to determine if the target system
has all the updated files you expect to see w/o having to check MD5s etc.

In our environment, the whole system runs off the initramfs partition, and
seeing the modified times of the shared libraries (for example) helps us
find bugs that may have been introduced by the build system incorrectly
propogating outdated shared libraries into the image.

Similarly, many of the initializion/configuration files in /etc might be
dynamically built by the build system, and knowing when they were modified
helps us sanity check whether the target system has the "latest" files
etc.

Finally, we might use last modified times to determine whether a hot fix
should be applied or not to the running ramfs.

Signed-off-by: Nye Liu <nyet@nyet.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:31 -07:00
Geert Uytterhoeven
93fd85d005 identify_ramdisk_image(): correct typo about return value in comment
identify_ramdisk_image() returns 0 (not -1) if a gzipped ramdisk is found:

	if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) {
		printk(KERN_NOTICE
		       "RAMDISK: Compressed image found at block %d\n",
		       start_block);
		nblocks = 0;
		^^^^^^^^^^^
		goto done;
	}

	...

done:
	sys_lseek(fd, start_block * BLOCK_SIZE, 0);
	kfree(buf);
	return nblocks;
	^^^^^^^^^^^^^^

Hence correct the typo in the comment, which has existed since the
addition of compressed ramdisk support in 1.3.48.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:30 -07:00
Linus Torvalds
2d51b75370 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot:
  raid, fastboot: hide RAID autodetect option if MD is compiled as a module
  raid: make RAID autodetect default a KConfig option
  warning: fix init do_mounts_md c
  fastboot: make the RAID autostart code print a message just before waiting
  fastboot: make the raid autodetect code wait for all devices to init
  fastboot: Fix bootgraph.pl initcall name regexp
  fastboot: fix issues and improve output of bootgraph.pl
  Add a script to visualize the kernel boot process / time
2008-10-14 12:28:02 -07:00
Tim Bird
ca538f6bbe tracing/fastboot: add better resolution to initcall debug/tracing
Change the time resolution for initcall_debug to microseconds, from
milliseconds.  This is handy to determine which initcalls you want to work
on for faster booting.

One one of my test machines, over 90% of the initcalls are less than a
millisecond and (without this patch) these are all reported as 0 msecs.
Working on the 900 us ones is more important than the 4 us ones.

With 'quiet' on the kernel command line, this adds no significant overhead
to kernel boot time.

Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:27 +02:00
Frederic Weisbecker
097d036a2f tracing/fastboot: only trace non-module initcalls
At this time, only built-in initcalls interest us.
We can't really produce a relevant graph if we include
the modules initcall too.

I had good results after this patch (see svg in attachment).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:17 +02:00
Frederic Weisbecker
5601020feb tracing/fastboot: get the initcall name before it disappears
After some initcall traces, some initcall names may be inconsistent.
That's because these functions will disappear from the .init section
and also their name from the symbols table.

So we have to copy the name of the function in a buffer large enough
during the trace appending. It is not costly for the ring_buffer because
the number of initcall entries is commonly not really large.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:12 +02:00
Frederic Weisbecker
cb5ab74204 tracing/fastboot: change the printing of boot tracer according to bootgraph.pl
Change the boot tracer printing to make it parsable for
the scripts/bootgraph.pl script.

We have now to output two lines for each initcall, according to the
printk in do_one_initcall() in init/main.c
We need now the call's time and the return's time.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:11 +02:00
Frédéric Weisbecker
3bf77af6e1 tracing/ftrace: launch boot tracing after pre-smp initcalls
Launch the boot tracing inside the initcall_debug area. Old printk
have not been removed to keep the old way of initcall tracing for
backward compatibility.

[ mingo@elte.hu: resolved conflicts ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:38:50 +02:00
Arjan van de Ven
aa5d9151f7 tracing/fastboot: add a script to visualize the kernel boot process / time
When optimizing the kernel boot time, it's very valuable to visualize
what is going on at which time. In addition, with the fastboot asynchronous
initcall level, it's very valuable to see which initcall gets run where
and when.

This patch adds a script to turn a dmesg into a SVG graph (that can be
shown with tools such as InkScape, Gimp or Firefox) and a small change
to the initcall code to print the PID of the thread calling the initcall
(so that the script can work out the parallelism).

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-10-14 10:38:46 +02:00
Steven Rostedt
68bf21aa15 ftrace: mcount call site on boot nops core
This is the infrastructure to the converting the mcount call sites
recorded by the __mcount_loc section into nops on boot. It also allows
for using these sites to enable tracing as normal. When the __mcount_loc
section is used, the "ftraced" kernel thread is disabled.

This uses the current infrastructure to record the mcount call sites
as well as convert them to nops. The mcount function is kept as a stub
on boot up and not converted to the ftrace_record_ip function. We use the
ftrace_record_ip to only record from the table.

This patch does not handle modules. That comes with a later patch.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:34:44 +02:00
Ingo Molnar
5f87f11218 tracing: clean up tracepoints kconfig structure
do not expose users to CONFIG_TRACEPOINTS - tracers can select it
just fine.

update ftrace to select CONFIG_TRACEPOINTS.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:33:32 +02:00
Ingo Molnar
fa340d9c05 tracing: disable tracepoints by default
while it's arguably low overhead, we dont enable new features by default.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:32:56 +02:00
Mathieu Desnoyers
97e1c18e8d tracing: Kernel Tracepoints
Implementation of kernel tracepoints. Inspired from the Linux Kernel
Markers. Allows complete typing verification by declaring both tracing
statement inline functions and probe registration/unregistration static
inline functions within the same macro "DEFINE_TRACE". No format string
is required. See the tracepoint Documentation and Samples patches for
usage examples.

Taken from the documentation patch :

"A tracepoint placed in code provides a hook to call a function (probe)
that you can provide at runtime. A tracepoint can be "on" (a probe is
connected to it) or "off" (no probe is attached). When a tracepoint is
"off" it has no effect, except for adding a tiny time penalty (checking
a condition for a branch) and space penalty (adding a few bytes for the
function call at the end of the instrumented function and adds a data
structure in a separate section).  When a tracepoint is "on", the
function you provide is called each time the tracepoint is executed, in
the execution context of the caller. When the function provided ends its
execution, it returns to the caller (continuing from the tracepoint
site).

You can put tracepoints at important locations in the code. They are
lightweight hooks that can pass an arbitrary number of parameters, which
prototypes are described in a tracepoint declaration placed in a header
file."

Addition and removal of tracepoints is synchronized by RCU using the
scheduler (and preempt_disable) as guarantees to find a quiescent state
(this is really RCU "classic"). The update side uses rcu_barrier_sched()
with call_rcu_sched() and the read/execute side uses
"preempt_disable()/preempt_enable()".

We make sure the previous array containing probes, which has been
scheduled for deletion by the rcu callback, is indeed freed before we
proceed to the next update. It therefore limits the rate of modification
of a single tracepoint to one update per RCU period. The objective here
is to permit fast batch add/removal of probes on _different_
tracepoints.

Changelog :
- Use #name ":" #proto as string to identify the tracepoint in the
  tracepoint table. This will make sure not type mismatch happens due to
  connexion of a probe with the wrong type to a tracepoint declared with
  the same name in a different header.
- Add tracepoint_entry_free_old.
- Change __TO_TRACE to get rid of the 'i' iterator.

Masami Hiramatsu <mhiramat@redhat.com> :
Tested on x86-64.

Performance impact of a tracepoint : same as markers, except that it
adds about 70 bytes of instructions in an unlikely branch of each
instrumented function (the for loop, the stack setup and the function
call). It currently adds a memory read, a test and a conditional branch
at the instrumentation site (in the hot path). Immediate values will
eventually change this into a load immediate, test and branch, which
removes the memory read which will make the i-cache impact smaller
(changing the memory read for a load immediate removes 3-4 bytes per
site on x86_32 (depending on mov prefixes), or 7-8 bytes on x86_64, it
also saves the d-cache hit).

About the performance impact of tracepoints (which is comparable to
markers), even without immediate values optimizations, tests done by
Hideo Aoki on ia64 show no regression. His test case was using hackbench
on a kernel where scheduler instrumentation (about 5 events in code
scheduler code) was added.

Quoting Hideo Aoki about Markers :

I evaluated overhead of kernel marker using linux-2.6-sched-fixes git
tree, which includes several markers for LTTng, using an ia64 server.

While the immediate trace mark feature isn't implemented on ia64, there
is no major performance regression. So, I think that we don't have any
issues to propose merging marker point patches into Linus's tree from
the viewpoint of performance impact.

I prepared two kernels to evaluate. The first one was compiled without
CONFIG_MARKERS. The second one was enabled CONFIG_MARKERS.

I downloaded the original hackbench from the following URL:
http://devresources.linux-foundation.org/craiger/hackbench/src/hackbench.c

I ran hackbench 5 times in each condition and calculated the average and
difference between the kernels.

    The parameter of hackbench: every 50 from 50 to 800
    The number of CPUs of the server: 2, 4, and 8

Below is the results. As you can see, major performance regression
wasn't found in any case. Even if number of processes increases,
differences between marker-enabled kernel and marker- disabled kernel
doesn't increase. Moreover, if number of CPUs increases, the differences
doesn't increase either.

Curiously, marker-enabled kernel is better than marker-disabled kernel
in more than half cases, although I guess it comes from the difference
of memory access pattern.

* 2 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      4.811   |       4.872  |  +0.061  |  +1.27  |
      100 |      9.854   |      10.309  |  +0.454  |  +4.61  |
      150 |     15.602   |      15.040  |  -0.562  |  -3.6   |
      200 |     20.489   |      20.380  |  -0.109  |  -0.53  |
      250 |     25.798   |      25.652  |  -0.146  |  -0.56  |
      300 |     31.260   |      30.797  |  -0.463  |  -1.48  |
      350 |     36.121   |      35.770  |  -0.351  |  -0.97  |
      400 |     42.288   |      42.102  |  -0.186  |  -0.44  |
      450 |     47.778   |      47.253  |  -0.526  |  -1.1   |
      500 |     51.953   |      52.278  |  +0.325  |  +0.63  |
      550 |     58.401   |      57.700  |  -0.701  |  -1.2   |
      600 |     63.334   |      63.222  |  -0.112  |  -0.18  |
      650 |     68.816   |      68.511  |  -0.306  |  -0.44  |
      700 |     74.667   |      74.088  |  -0.579  |  -0.78  |
      750 |     78.612   |      79.582  |  +0.970  |  +1.23  |
      800 |     85.431   |      85.263  |  -0.168  |  -0.2   |
--------------------------------------------------------------

* 4 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      2.586   |       2.584  |  -0.003  |  -0.1   |
      100 |      5.254   |       5.283  |  +0.030  |  +0.56  |
      150 |      8.012   |       8.074  |  +0.061  |  +0.76  |
      200 |     11.172   |      11.000  |  -0.172  |  -1.54  |
      250 |     13.917   |      14.036  |  +0.119  |  +0.86  |
      300 |     16.905   |      16.543  |  -0.362  |  -2.14  |
      350 |     19.901   |      20.036  |  +0.135  |  +0.68  |
      400 |     22.908   |      23.094  |  +0.186  |  +0.81  |
      450 |     26.273   |      26.101  |  -0.172  |  -0.66  |
      500 |     29.554   |      29.092  |  -0.461  |  -1.56  |
      550 |     32.377   |      32.274  |  -0.103  |  -0.32  |
      600 |     35.855   |      35.322  |  -0.533  |  -1.49  |
      650 |     39.192   |      38.388  |  -0.804  |  -2.05  |
      700 |     41.744   |      41.719  |  -0.025  |  -0.06  |
      750 |     45.016   |      44.496  |  -0.520  |  -1.16  |
      800 |     48.212   |      47.603  |  -0.609  |  -1.26  |
--------------------------------------------------------------

* 8 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      2.094   |       2.072  |  -0.022  |  -1.07  |
      100 |      4.162   |       4.273  |  +0.111  |  +2.66  |
      150 |      6.485   |       6.540  |  +0.055  |  +0.84  |
      200 |      8.556   |       8.478  |  -0.078  |  -0.91  |
      250 |     10.458   |      10.258  |  -0.200  |  -1.91  |
      300 |     12.425   |      12.750  |  +0.325  |  +2.62  |
      350 |     14.807   |      14.839  |  +0.032  |  +0.22  |
      400 |     16.801   |      16.959  |  +0.158  |  +0.94  |
      450 |     19.478   |      19.009  |  -0.470  |  -2.41  |
      500 |     21.296   |      21.504  |  +0.208  |  +0.98  |
      550 |     23.842   |      23.979  |  +0.137  |  +0.57  |
      600 |     26.309   |      26.111  |  -0.198  |  -0.75  |
      650 |     28.705   |      28.446  |  -0.259  |  -0.9   |
      700 |     31.233   |      31.394  |  +0.161  |  +0.52  |
      750 |     34.064   |      33.720  |  -0.344  |  -1.01  |
      800 |     36.320   |      36.114  |  -0.206  |  -0.57  |
--------------------------------------------------------------

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: 'Peter Zijlstra' <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:28:28 +02:00
Linus Torvalds
20272c8994 Merge branch 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  proc: remove kernel.maps_protect
  proc: remove now unneeded ADDBUF macro
  [PATCH] proc: show personality via /proc/pid/personality
  [PATCH] signal, procfs: some lock_task_sighand() users do not need rcu_read_lock()
  proc: move PROC_PAGE_MONITOR to fs/proc/Kconfig
  proc: make grab_header() static
  proc: remove unused get_dma_list()
  proc: remove dummy vmcore_open()
  proc: proc_sys_root tweak
  proc: fix return value of proc_reg_open() in "too late" case

Fixed up trivial conflict in removed file arch/sparc/include/asm/dma_32.h
2008-10-13 10:04:04 -07:00
Arjan van de Ven
a364092a41 raid: make RAID autodetect default a KConfig option
RAID autodetect has the side effect of requiring synchronisation
of all device drivers, which can make the boot several seconds longer
(I've measured 7 on one of my laptops).... even for systems that don't
have RAID setup for the root filesystem (the only FS where this matters).

This patch makes the default for autodetect a config option; either way
the user can always override via the kernel command line.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: NeilBrown <neilb@suse.de>
2008-10-12 08:25:02 -07:00
Ingo Molnar
82cbc11a41 warning: fix init do_mounts_md c
fix warning:

  init/do_mounts_md.c: In function ‘md_run_setup’:
  init/do_mounts_md.c:282: warning: ISO C90 forbids mixed declarations and code

also, use the opportunity to put the RAID autodetection code
into a separate function - this also solves a checkpatch style warning.

No code changed:

md5:
   aa36a35faef371b05f1974ad583bdbbd  do_mounts_md.o.before.asm
   aa36a35faef371b05f1974ad583bdbbd  do_mounts_md.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-12 08:24:34 -07:00
Arjan van de Ven
02c15def84 fastboot: make the RAID autostart code print a message just before waiting
As requested/suggested by Neil Brown: make the raid code print that it's
about to wait for probing to be done as well as give a suggestion on how
to disable the probing if the user doesn't use raid.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com
2008-10-12 08:23:53 -07:00
Arjan van de Ven
589f800bb1 fastboot: make the raid autodetect code wait for all devices to init
The raid autodetect code really needs to have all devices probed before
it can detect raid arrays; not doing so would give rather messy situations
where arrays would get detected as degraded while they shouldn't be etc.

This is in preparation of removing the "wait for everything to init"
code that makes everyone pay, not just raid users.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-10-12 08:23:04 -07:00
Arjan van de Ven
f9b9796ade Add a script to visualize the kernel boot process / time
When optimizing the kernel boot time, it's very valuable to visualize
what is going on at which time. In addition, with some of the initializing
going asynchronous soon, it's valuable to track/print which worker thread
is executing the initialization.

This patch adds a script to turn a dmesg into a SVG graph (that can be
shown with tools such as InkScape, Gimp or Firefox) and a small change
to the initcall code to print the PID of the thread calling the initcall
(so that the script can work out the parallelism).

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-10-12 08:07:20 -07:00
Alexey Dobriyan
53167a3ef2 proc: move PROC_PAGE_MONITOR to fs/proc/Kconfig
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-10 04:18:57 +04:00
Tejun Heo
55dc7db70a init: DEBUG_BLOCK_EXT_DEVT requires explicit root= param
DEBUG_BLOCK_EXT_DEVT shuffles SCSI and IDE device numbers and root
device number set using rdev become meaningless.  Root devices should
be explicitly specified using textual names.  Warn about it if root
can't be found and DEBUG_BLOCK_EXT_DEVT is enabled.  Also, add warning
to the help text.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
Linus Torvalds
96d746c68f Fix init/main.c to use regular printk with '%pF' for initcall fn
.. small detail, but the silly e1000e initcall warning debugging caused
me to look at this code.  Rather than gouge my eyes out with a spoon, I
just fixed it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03 13:38:07 -07:00
Andi Kleen
9e94cd325b Move sysctl check into debugging section and don't make it default y
I noticed that sysctl_check.o was the largest object file in
a allnoconfig build in kernel/*.

  36243       0       0   36243    8d93 kernel/sysctl_check.o

This is because it was default y and && EMBEDDED. But I don't
really see a need for a non kernel developer to have their
sysctls checked all the time.

So move the Kconfig into the kernel debugging section and
also drop the default y and the EMBEDDED check.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-16 17:13:43 -07:00
Arjan van de Ven
59f9415ffb modules: extend initcall_debug functionality to the module loader
The kernel has this really nice facility where if you put "initcall_debug"
on the kernel commandline, it'll print which function it's going to
execute just before calling an initcall, and then after the call completes
it will

1) print if it had an error code

2) checks for a few simple bugs (like leaving irqs off)
and

3) print how long the init call took in milliseconds.

While trying to optimize the boot speed of my laptop, I have been loving
number 3 to figure out what to optimize...  ...  and then I wished that
the same thing was done for module loading.

This patch makes the module loader use this exact same functionality; it's
a logical extension in my view (since modules are just sort of late
binding initcalls anyway) and so far I've found it quite useful in finding
where things are too slow in my boot.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-08-12 17:52:54 +10:00
Robert P. J. Day
0b0de14433 Kconfig: Extend "menuconfig" for modules to simplify Kconfig file
Given that the init/Kconfig file uses a "menuconfig" directive for
modules already, might as well wrap all the submenu entries in an "if"
to toss all those dependencies.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-08-06 22:14:04 +02:00
Bartlomiej Zolnierkiewicz
b5b9309d34 remove unnecessary <linux/hdreg.h> includes
Following files don't need <linux/hdreg.h> at all:

- arch/mips/jazz/setup.c
- arch/sh/boards/mach-systemh/irq.c
- drivers/macintosh/mediabay.c
- drivers/scsi/hptiop.c
- drivers/usb/storage/freecom.c
- arch/powerpc/include/asm/ide.h
- init/main.c

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-05 18:16:58 +02:00
Linus Torvalds
e811603feb Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: scripts/ver_linux: don't set PATH
  Kconfig/init: change help text to match default value
  kbuild: genksyms: Include extern information in dumps
  kbuild: genksyms parser: fix the __attribute__ rule
  kbuild: scripts/genksyms/lex.l: add %option noinput
  kconfig: scripts/kconfig/zconf.l: add %option noinput
  kbuild: fix O=... build of um
2008-08-01 11:50:21 -07:00
Linus Torvalds
57b1494d2b Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  generic, x86: fix add iommu_num_pages helper function
  x86: remove stray <6> in BogoMIPS printk
  x86: move dma32_reserve_bootmem() after reserve_crashkernel()
2008-08-01 10:28:17 -07:00
jkacur
775a7229ac Kconfig/init: change help text to match default value
Change the "If unsure" message to match the default value.

Signed-off-by: John Kacur <jkacur at gmail dot com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-31 23:33:10 +02:00
Geert Uytterhoeven
bd673c7c3b initrd: cast initrd_start' to void *'
commit fb6624ebd9 (initrd: Fix virtual/physical
mix-up in overwrite test) introduced the compiler warning below on mips,
as its virt_to_page() doesn't cast the passed address to unsigned long
internally, unlike on most other architectures:

init/main.c: In function `start_kernel':
init/main.c:633: warning: passing argument 1 of `virt_to_phys' makes pointer from integer without a cast
init/main.c:636: warning: passing argument 1 of `virt_to_phys' makes pointer from integer without a cast

For now, kill the warning by explicitly casting initrd_start to `void *', as
that's the type it should really be.

Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:45 -07:00
Ingo Molnar
35780c8ea7 Merge commit 'v2.6.27-rc1' into x86/urgent 2008-07-29 12:10:50 +02:00
Ingo Molnar
cb28a1bbdb Merge branch 'linus' into core/generic-dma-coherent
Conflicts:

	arch/x86/Kconfig

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-29 00:07:55 +02:00
Joe Perches
d7ba11d01c x86: remove stray <6> in BogoMIPS printk
Rabin Vincent noticed that there's a stray <6> in BogoMIPS printk:

> Remove the extra KERN_INFO which causes this:
> Calibrating delay loop... <6>179.40 BogoMIPS (lpj=897024)
> -	printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
> -			loops_per_jiffy/(500000/HZ),
> -			(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
> +	printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
> +		loops_per_jiffy/(500000/HZ),
> +		(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
>  }

How about just using KERN_CONT and leaving the whitespace
for a patch that does the entire file?

Reported-by: Rabin Vincent <rabin@rab.in>
2008-07-28 14:22:26 +02:00
Linus Torvalds
6948385cbd Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
  setlocalversion: do not describe if there is nothing to describe
  kconfig: fix typos: "Suport" -> "Support"
  kconfig: make defconfig is no longer chatty
  kconfig: make oldconfig is now less chatty
  kconfig: speed up all*config + randconfig
  kconfig: set all new symbols automatically
  kconfig: add diffconfig utility
  kbuild: remove Module.markers during mrproper
  kbuild: sparse needs CF not CHECKFLAGS
  kernel-doc: handle/strip __init
  vmlinux.lds: move __attribute__((__cold__)) functions back into final .text section
  init: fix URL of "The GNU Accounting Utilities"
  kbuild: add arch/$ARCH/include to search path
  kbuild: asm symlink support for arch/$ARCH/include
  kbuild: support arch/$ARCH/include for tags, cscope
  kbuild: prepare headers_* for arch/$ARCH/include
  kbuild: install all headers when arch is changed
  kbuild: make clean removes *.o.* as well
  kbuild: optimize headers_* targets
  kbuild: only one call for include/ in make headers_*
  ...
2008-07-27 09:59:59 -07:00